BaselineWatch
Desk

RHEL-10-700870 RHEL 10 must disable wireless network adapters.

DISA STIG library V1R3
All changes in this version
first version loaded CAT II

Maps to AC-18(1), SC-8, SC-8(1) via CCI-001444, CCI-001443, CCI-002421, CCI-002418

Title

RHEL 10 must disable wireless network adapters.

Control

Note: This requirement is not applicable for systems that do not have physical wireless network radios. Verify RHEL 10 disables wireless interfaces on the system with the following command: $ nmcli device status DEVICE TYPE STATE CONNECTION virbr0 bridge connected virbr0 wlp7s0 wifi connected wifiSSID enp6s0 ethernet disconnected -- p2p-dev-wlp7s0 wifi-p2p disconnected -- lo loopback unmanaged -- virbr0-nic tun unmanaged -- If a wireless interface is configured and has not been documented and approved by the information system security officer, this is a finding.

Discussion

This requirement applies to wireless peripheral technologies (e.g., wireless mice, keyboards, displays, etc.) used with RHEL 10 systems. Wireless peripherals (e.g., Wi-Fi/Bluetooth/IR keyboards, mice and pointing devices, and near field communications [NFC]) present a unique challenge by creating an open, unsecured port on a computer. Wireless peripherals must meet DoW requirements for wireless data transmission and be approved for use by the authorizing official. Even though some wireless peripherals, such as mice and pointing devices, do not ordinarily carry information that must be protected, modification of communications with these wireless peripherals may be used to compromise the RHEL 10 operating system. Satisfies: SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-00481

Related controls

CCI-001443, CCI-001444, CCI-002418, CCI-002421

Fix

Configure RHEL 10 to disable all wireless network interfaces with the following command: $ nmcli radio all off