BaselineWatch
Desk
Your fleet and your work Fleetyour releases and the hardware they run onTriagewhat needs a decisionWatchlistthe products and platforms you runSaved searchesthe lists you come back to
This instance Sourceswhat is read, how often, under what termsDigestthe daily or weekly summary, and alerts
How it is drawn Appearancethe look and the colour schemeBrandingthe mark this instance wears
Owner sign-in

4.1.4 Visual Card Topography

NIST PIV and digital identity FIPS 201-3 against FIPS 201-2
All changes in this version
modified 4 PIV Front-End Subsystem part of 4.1

Title

Visual Card Topography

Control changed

Before · FIPS 201-2

The information on a PIV Card shall be in visual printed and electronic form. This section covers the placement of visual and printed information. It does not cover information stored in electronic form, such as stored data elements, and other possible machine-readable technologies. Logically stored data elements are discussed in Section 4.2.

As noted in Section 4.1.3, the PIV Card shall contain a contact and a contactless ICC interface. This Standard does not specify whether a single chip is used or multiple chips are used to support the mandated contact and contactless interfaces.

To achieve a common PIV Card appearance, yet provide departments and agencies the flexibility to augment the card with department or agency-specific requirements, the card shall contain mandated and optional printed information and mandated and optional machine-readable technologies. Mandated and optional items shall generally be placed as described and depicted. Printed data shall not interfere with machine-readable technology.

Areas that are marked as reserved should not be used for printing. The reason for the recommended reserved areas is that placement of the embedded contactless ICC module may vary from manufacturer to manufacturer, and there are constraints that prohibit printing over the embedded contactless module. The PIV Card topography provides flexibility for placement of the embedded module, either in the upper right-hand corner or in the lower bottom portion. Printing restrictions apply only to the area where the embedded module is located (i.e., upper right-hand corner, lower bottom portion).

Because technological developments may obviate the need to have a restricted area, or change the size of the restricted area, departments and agencies are encouraged to work closely with card vendors and manufacturers to ensure current printing procedures and methods are applied as well as potential integration of features that may improve tamper resistance and anti-counterfeiting of the PIV Card.

After · FIPS 201-3

The information on a PIV Card shallSHALL be in visual printed and electronic form. This section covers the placement of visual and printed information. It does not cover information stored in electronic form, such as stored data elements, andor other possible machine-readable technologies. Logically stored data elements are discussed in Section 4.2.

As noted in Section 4.1.3, the PIV Card shallSHALL contain a contact and a contactless ICC interface. This Standard does not specify whether a single chip is usedthe ornumber multipleof chips are used to support the mandated contact and contactless interfaces.

To achieve a common PIV Card appearance, yetand provide departments and agencies with the flexibility to augment the card with departmentdepartment- or agency-specific requirements, the card shallSHALL contain mandated and optional printed information and mandated and optional machine-readable technologies. Mandated and optional items shall generallySHALL be placed as described and depicted. Printed data shallSHALL notNOT interfere with machine-readable technology.

Areas that are marked as reserved shouldSHOULD notNOT be used for printing. The reason for the recommended reserved areas is that placement of the embedded contactless ICC module may vary from manufacturer tobetween manufacturermanufacturers, and there are constraints that prohibit printing over the embedded contactless module. The PIV Card topography provides flexibility for placement of the embedded module, either in the upper right-handright corner or in the lower bottom portion. Printing restrictions apply only to the area where the embedded module is located (i.e.

Unless otherwise specified, upperall right-handdata corner,labels lowerSHALL bottombe portion).

Becauseprinted technologicalin developments5 maypt obviateArial with the needcorresponding todata havein a6 restrictedpt area,Arial orBold. changeIf the sizeArial offont theis restrictednot areaavailable, departmentsa andvisually agenciessimilar arefont, encouragedsuch toas workPublic closelySans with[PublicSans], cardMAY vendorsbe andsubstituted manufacturersfor all references to ensureArial currentwithin printingthis proceduresStandard. andIf methodssuch area appliedsubstitution asis wellmade, asthe potentialsubstitution integrationSHALL ofbe featuresconsistently thatapplied mayto improveall tamperuses resistanceof andthe anti-counterfeitingArial offont on the PIV Card. Unless otherwise specified, all text SHALL be printed in black.