Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 7 days
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-40701exploit | 6.3 medium | 1.0% | f5, dos, nginx_gateway_fabric, nginx_ingress_controller | NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssl_module module when the ssl_verify_client directive is set to "on" or "optional," and the ssl_ocsp directive is set to "on" or the leaf parameters are configured with a resolver. With this configuration, an unauthenticated attacker can send requests along with conditions beyond its control that may cause a heap-use-after-free error in the NGINX worker process. This vulnerability may result in limited modification of data or the NGINX worker process restarting. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | Mon 26 Oct |
| CVE-2026-54900exploit | 6.3 medium | 1.0% | no CPE yet | Oj (Optimized JSON) is a JSON parser and Object marshaller packaged as a Ruby gem. In versions prior to 3.17.2, when in usual mode with create_id enabled, Oj::Parser#parse is vulnerable to heap corruption via a negative-size memcpy. When a JSON object key is exactly 65,535 bytes long, an integer truncation in form_attr (usual.c:63) converts the length to -1 before passing it to memcpy. This causes memcpy to copy SIZE_MAX bytes (interpreted as a huge size_t), corrupting heap memory and crashing the process. The issue has been fixed in version 3.17.2. | Sun 25 Oct |
| CVE-2026-49844exploit | 6.3 medium | 1.0% | apache, log4j | Improper encoding of non-finite floating-point values during MapMessage JSON serialization in Apache Log4j API produces output that is not valid JSON. This issue affects Apache Log4j API versions 2.13.1 through 2.25.4 and version 2.26.0. The fix for CVE-2026-34481 did not cover all code paths: when a MapMessage contains a non-finite IEEE 754 value (NaN, Infinity, or -Infinity), MapMessage.asJson() emits the corresponding bare token. RFC 8259 does not permit these tokens, so a conformant parser rejects the resulting document. The defect is reachable only when both of the following conditions hold: * The application uses the message resolver https://logging.apache.org/log4j/2.x/manual/json-template-layout.html#event-template-resolver-message of JsonTemplateLayout or any other layout that relies on MapMessage.asJson() or MapMessage.getFormattedMessage(new String[]{"JSON"}). * The application logs a MapMessage that contains an attacker-controlled floating-point value. An attacker who can supply a non-finite value can cause the affected layout to emit malformed JSON, which may corrupt the enclosing log record or disrupt downstream log ingestion and parsing. Users are advised to upgrade to Apache Log4j API 2.25.5 or 2.26.1, both of which emit RFC 8259-compliant JSON for non-finite values. | Sun 25 Oct |
| CVE-2023-32070exploit | 6.1 medium | 1.0% | xwiki, rendering | XWiki Platform is a generic wiki platform. Prior to version 14.6-rc-1, HTML rendering didn't check for dangerous attributes/attribute values. This allowed cross-site scripting (XSS) attacks via attributes and link URLs, e.g., supported in XWiki syntax. This has been patched in XWiki 14.6-rc-1. There are no known workarounds apart from upgrading to a fixed version. | Wed 28 Oct |
| CVE-2026-25854exploit | 6.1 medium | 1.0% | apache, tomcat | Occasional URL redirection to untrusted Site ('Open Redirect') vulnerability in Apache Tomcat via the LoadBalancerDrainingValve. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M1 through 10.1.52, from 9.0.0.M23 through 9.0.115, from 8.5.30 through 8.5.100. Other, unsupported versions may also be affected Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue. | Mon 26 Oct |
| CVE-2026-54316exploit | 6.0 medium | 1.0% | anthropic, claude_code | Claude Code is an agentic coding tool. From 0.2.54 until 2.1.163, because the hostname huggingface.co was pre-approved as a bare hostname for the WebFetch tool, any path on that domain—including attacker-controlled model repositories—was auto-approved without a permission prompt or being subject to --allowedTools restrictions. An attacker able to inject untrusted content into a Claude Code context could direct it to issue WebFetch requests against attacker-controlled repository files (e.g. /resolve/main/config.json), which HuggingFace counts as downloads server-side, creating a covert out-of-band channel for encoding and exfiltrating data Claude can access such as files, environment variables, or command output. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 2.1.163. | Sun 25 Oct |
| CVE-2026-58025exploit | 5.9 medium | 1.0% | mediawiki | Deserialization of untrusted data vulnerability in Wikimedia Foundation MediaWiki. This vulnerability is associated with program files includes/Import/WikiImporter.Php, includes/Import/WikiRevision.Php, includes/Logging/LogEntryBase.Php. This issue affects MediaWiki: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9. | Sun 25 Oct |
| CVE-2026-47429exploit | 5.9 medium | 1.0% | vitest.dev, vitest | Vitest is a testing framework powered by Vite. Prior to 3.2.5 and 4.1.0, the Vitest UI/API server on Windows used isFileServingAllowed incorrectly for /__vitest_attachment__, allowing \\?\\..\\ path traversal to read files outside the project; exposed API write and rerun features such as saveTestFile and rerun could also allow arbitrary script execution. This issue is fixed in versions 3.2.5 and 4.1.0. | Sat 24 Oct |
| CVE-2026-14628exploit | 5.5 medium | 1.0% | no CPE yet | A vulnerability was detected in NousResearch hermes-agent up to 2026.5.16. This impacts the function extract_media of the file gateway/platforms/base.py of the component Live Webhook Endpoint. Performing a manipulation results in path traversal. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Sun 25 Oct |
| CVE-2026-95664exploit | 5.4 medium | 1.0% | apache, camel | Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. | Wed 28 Oct |
| CVE-2023-47268exploit ×2 | 5.3 medium | 1.0% | prusa3d, prusaslicer | In libslic3r/GCode/PostProcessor.cpp in Prusa PrusaSlicer through 2.6.1, a crafted 3mf project file can execute arbitrary code on a host where the project is sliced and G-code exported. | Wed 28 Oct |
| CVE-2026-41472exploit | 5.3 medium | 1.0% | cyberpanel | CyberPanel versions prior to 2.4.5 contain a stored cross-site scripting vulnerability in the AI Scanner dashboard where the POST /api/ai-scanner/callback endpoint lacks authentication and allows unauthenticated attackers to inject malicious JavaScript by overwriting the findings_json field of ScanHistory records. Attackers can inject JavaScript that executes in an administrator's authenticated session when they visit the AI Scanner dashboard, allowing them to issue same-origin requests to plant cron jobs and achieve remote code execution on the server. | Mon 26 Oct |
| CVE-2026-46453exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client. The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names. | Sun 25 Oct |
| CVE-2026-48206exploit | 5.3 medium | 1.0% | apache, camel | Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component. The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source. | Sun 25 Oct |
| CVE-2026-33006exploit | 4.8 medium | 1.0% | apache, http_server | A timing attack against mod_auth_digest in Apache HTTP Server 2.4.66 allows a bypass of Digest authentication by a remote attacker. Users are recommended to upgrade to version 2.4.67, which fixes this issue. | Mon 26 Oct |
| CVE-2026-46584exploit | 3.7 low | 1.0% | apache, camel | Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input. | Sun 25 Oct |
| CVE-2026-7671exploit | 2.9 low | 1.0% | no CPE yet | A vulnerability has been found in CodeWise Tornet Scooter Mobile App 4.75 on iOS/Android. The impacted element is an unknown function of the file /TwoFactor. Such manipulation leads to improper restriction of excessive authentication attempts. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is regarded as difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-55780exploit | 2.4 low | 1.0% | no CPE yet | NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's .NET single-file bundle handler in NanaZip.Codecs.Archive.DotNetSingleFile.cpp sizes its extraction buffer from the bundle entry Size field, which is only checked for sign and is not validated against the real file size. A crafted bundle can cause an attacker-chosen allocation inside Extract, where std::bad_alloc or std::length_error can escape across the COM STDMETHODCALLTYPE boundary and crash the process. This issue is fixed in version 6.5.1749.0. | Sun 25 Oct |
| CVE-2026-31158exploit | unscored | 1.0% | no CPE yet | SQL Injection vulnerability in CRM SOFTTRADE Infotech (aka softtradeindia) 1.0 allows a remote attacker to execute arbitrary code via the Login Page | Thu 29 Oct |
| CVE-2026-65374exploit | unscored | 1.0% | apple, macos | A memory corruption issue was addressed with improved validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Connecting to a malicious WebDAV server may result in code execution. | Mon 26 Oct |
| CVE-2026-65343exploit ×2 | unscored | 1.0% | apple, ios and ipados, macos, tvos | A use after free issue was addressed with improved memory management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. A remote attacker may be able to cause unexpected system termination. | Mon 26 Oct |
| CVE-2026-115905exploit ×2 | 10.0 critical | 0.00% | no CPE yet | zip is a zip library for Rust that supports reading and writing simple ZIP files. Through 9.0.4, ZipArchive treats Central Directory File Header filenames as authoritative while ZipStreamReader extracts using Local File Header filenames without reconciling the duplicate metadata in src/read/stream.rs. A crafted archive can therefore appear benign to a component that inspects the central directory but cause a streaming extractor to write a different attacker-selected path and content, potentially overwriting files used by a downstream service. This issue is fixed in version 9.0.5. | Mon 26 Oct |
| CVE-2026-0092exploit | 10.0 critical | 0.00% | google, android | In Package Manager, there is a possible device lock controller bypass due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | Mon 26 Oct |
| CVE-2026-54433exploit | 10.0 critical | 0.00% | roundcube, webmail | In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, there is Stored Cross-Site Scripting (XSS) via a crafted plain-text email message. The attacker-controlled JavaScript executes within the victim's authenticated session simply by opening or previewing the message (zero-click). | Sat 24 Oct |
| CVE-2026-114612exploit | 9.9 critical | 0.00% | no CPE yet | LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From 1.87.0 until 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2, the proxy reuses one cryptographic context for at-rest secrets and session tokens, allowing an authenticated internal user to have crafted metadata containing a forged administrator credential encrypted and returned by the API-key flow. Replaying that ciphertext as a bearer token causes the proxy to trust the forged proxy administrator identity, permitting administrative access and arbitrary commands through the MCP stdio endpoint. Versions 1.87.0 through 1.90.x require EXPERIMENTAL_UI_LOGIN to be enabled, while versions after 1.91.0 are exploitable in the default configuration. This issue was fixed in LiteLLM 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2. | 20 h ago |
| CVE-2026-71195exploit ×2 | 9.9 critical | 0.00% | no CPE yet | In OpenStack Manila before 23.0.1, multiple Manila API operations on public shares do not verify that the caller owns the share. The API controllers authorize operations against the caller's own project context, then load a foreign public share without re-authorizing against the share's actual owner. This affects the following operations: allow_access: grant data-plane read/write access to another tenant's share; deny_access: revoke the owner's existing access rules; update_access: escalate access level (e.g., ro to rw); create_share_backup: exfiltrate share data via a backup created under the attacker's project; soft_delete: move a foreign share to the recycle bin; restore: interfere with the owner's deletion workflow; export location metadata: create, update, and delete metadata on foreign export locations; access rule listing: disclose IPs, usernames, and CephFS keys. Any authenticated project member can exploit these operations on any public share. The share UUID is visible since the share is public. | Tue 27 Oct |
| CVE-2026-110720exploit | 9.9 critical | 0.00% | no CPE yet | Consul-k8s versions 0.42.0 and later are vulnerable to a cross-namespace authorization bypass in component ACL binding rules that may allow an attacker to obtain elevated Consul privileges. This vulnerability (CVE-2026-110720) is fixed in consul-k8s 2.1.0 and 1.8.18. | Tue 27 Oct |
| CVE-2026-39440exploit | 9.9 critical | 0.00% | no CPE yet | Improper Control of Generation of Code ('Code Injection') vulnerability in Funnelforms LLC FunnelFormsPro allows Remote Code Inclusion.This issue affects FunnelFormsPro: from n/a through 3.8.1. | Mon 26 Oct |
| CVE-2026-46716exploit | 9.9 critical | 0.00% | no CPE yet | Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.4.0 to before version 2.0.8, a RoleMember user can create a scheduled cron task with Cover=CronCoverAll, Servers=[] and an arbitrary Command. At every tick of the scheduler, the dashboard pushes that command to every server in the global ServerShared map — including servers that belong to other tenants (admin's servers, other members' servers). Each agent runs the command and returns the output, which is then sent to the attacker's own NotificationGroup → attacker-controlled webhook. This issue has been patched in version 2.0.8. | Sun 25 Oct |
| CVE-2026-52782exploit | 9.9 critical | 0.00% | no CPE yet | OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. | Sun 25 Oct |
| CVE-2026-60206exploit ×5 | 9.9 critical | 0.00% | oracle, weblogic_server | Vulnerability in the Oracle WebLogic Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0, 14.1.1.0.0, 14.1.2.0.0 and 15.1.1.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SAML to compromise Oracle WebLogic Server. While the vulnerability is in Oracle WebLogic Server, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle WebLogic Server. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). | Sat 24 Oct |
| CVE-2026-103409exploit | 9.8 critical | 0.00% | no CPE yet | A Missing authentication for critical function vulnerability in Juniper Networks Session Smart Router allows an unauthenticated network-based attacker to obtain administrative privileges by passing crafted URL parameters to an insecure endpoint running as root. Note that this vulnerability can only be exploited prior to the device being onboarded to Mist/Conductor. The issue can no longer be exploited once a device is onboarded to Mist/Conductor. | Wed 28 Oct |
| CVE-2026-76473exploit ×2 | 9.8 critical | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76473 are related to issues concerning improper neutralization of special elements in output used by a downstream component that are grouped under the Common Weakness Enumeration (CWE) Class CWE-74. | Tue 27 Oct |
| CVE-2026-6508exploit | 9.8 critical | 0.00% | no CPE yet | Origin Validation Error vulnerability in TUBITAK BILGEM Software Technologies Research Institute Liderahenk allows Accessing Functionality Not Properly Constrained by ACLs. This issue affects Liderahenk: from 2.0.1 before 2.0.2. | Mon 26 Oct |
| CVE-2026-43914exploit | 9.8 critical | 0.00% | dani-garcia, vaultwarden | Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.4, there is a security vulnerability in Vaultwarden that allows bypassing the login brute-force protection if email 2fa is enabled. If email 2fa is enabled, the unprotected 2fa-function send_email_login (email.rs, api endpoint /api/two-factor/send-email-login) also acts as an oracle determining whether a username-password combination is correct. An attacker can abuse that endpoint to brute-force passwords without rate-limiting. This works even for users who don't have email 2fa configured. This vulnerability is fixed in 1.35.4. | Mon 26 Oct |
| CVE-2026-54807exploit | 9.8 critical | 0.00% | no CPE yet | Unauthenticated Privilege Escalation in Registration Form for WooCommerce <= 1.0.9 versions. | Mon 26 Oct |
| CVE-2026-11561exploit | 9.8 critical | 0.00% | no CPE yet | Improper neutralization of special elements used in an expression language statement ('expression language injection') vulnerability in Soagen Informatics Technologies Software and Consulting Inc. Apinizer allows Code Injection. This issue affects Apinizer: from 2026.04.0 before 2026.04.6. | Sun 25 Oct |
| CVE-2026-49085exploit | 9.8 critical | 0.00% | no CPE yet | Unauthenticated PHP Object Injection in WP Insightly for Contact Form 7, WPForms, Elementor, Formidable and Ninja Forms <= 1.1.4 versions. | Sun 25 Oct |
| CVE-2026-49104exploit | 9.8 critical | 0.00% | no CPE yet | Unauthenticated PHP Object Injection in Integration for Keap/infusionsoft and Contact Form 7, WPForms, Elementor, Formidable, Ninja Forms <= 1.2.1 versions. | Sun 25 Oct |
| CVE-2026-49105exploit | 9.8 critical | 0.00% | no CPE yet | Unauthenticated PHP Object Injection in WP Zendesk for Contact Form 7, WPForms, Elementor, Formidable and Ninja Forms <= 1.1.4 versions. | Sun 25 Oct |
| CVE-2026-9691exploit | 9.8 critical | 0.00% | no CPE yet | Unauthenticated PHP Object Injection in Integration for ActiveCampaign and Contact Form 7, WPForms, Elementor, Ninja Forms <= 1.1.1 versions. | Sun 25 Oct |
| CVE-2026-14960exploit | 9.8 critical | 0.00% | no CPE yet | Pegatron `Tdelo64.sys` improperly exposes privileged hardware access functionality through the `\\.\TdeIo` device interface. IOCTL handlers including `TDE_IOCTL_INDEXIO_READ` and `TDE_IOCTL_INDEXIO_WRITE` permit unprivileged user-mode callers to perform arbitrary hardware I/O port reads and writes without authorization checks. A local attacker can abuse this functionality to manipulate hardware registers, tamper with firmware-related interfaces, cause system instability, or establish persistent low-level compromise. | Sat 24 Oct |
| CVE-2026-98432exploit ×26news ×3 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch. | 24 Oct |
| CVE-2026-12295exploit | 9.6 critical | 0.00% | mozilla, firefox, thunderbird | Sandbox escape in the DOM: Navigation component. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. | Mon 26 Oct |
| CVE-2026-13934exploit | 9.6 critical | 0.00% | google, chrome | Insufficient validation of untrusted input in Dawn in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) | Sun 25 Oct |
| CVE-2026-14382exploit | 9.6 critical | 0.00% | google, chrome | Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 150.0.7871.46 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | Sun 25 Oct |
| CVE-2026-22874exploit ×2 | 9.6 critical | 0.00% | no CPE yet | Gitea versions up to and including 1.26.2 have incomplete SSRF protection in webhook and migration allow-list filtering. | Sun 25 Oct |
| CVE-2026-59891exploit | 9.6 critical | 0.00% | no CPE yet | sigstore-js provides JavaScript libraries for interacting with Sigstore services. Prior to 0.7.1, getRegistryCredentials() reads credentials from the Docker config file and selects an entry by checking whether any configured auth key contains the target registry string. Because this is a substring match rather than an exact host match, credentials configured for one registry can be selected for and transmitted to a different registry whose hostname has a substring relationship with a configured auth key. This issue is fixed in version 0.7.1. | Sat 24 Oct |
| CVE-2026-116366exploit | 9.5 critical | — | clickhouse, clickhouse cloud | An issue has been discovered in ClickHouse Server that, under certain conditions, could allow an unauthenticated user with network access to execute arbitrary code on the ClickHouse Server. | 22 h ago |
| CVE-2026-47172exploit | 9.5 critical | 0.00% | no CPE yet | Quest Bot is an opensource modern Discord Bot built for moderation, utilities and support. Prior to version 1.0.3, the repository has a privileged deploy workflow that runs after the unprivileged build workflow completes. The build workflow runs on pull requests, and the deploy workflow checks out the triggering workflow’s head_sha, builds that code into a Docker image, pushes it as latest, and triggers production deployment. If an attacker can open a pull request from a branch named main, the deploy workflow condition can treat the PR build as deployable and build the attacker-controlled commit in a privileged deployment context. This can result in malicious container deployment and production bot compromise. This issue has been patched in version 1.0.3. | Sun 25 Oct |
400 of 20655 · Next · Previous
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.