Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-19586exploit | 9.3 critical | 6.0% | tp-link, er7212pc_firmware, er605_firmware, er605w_firmware | A pre-authentication OS command injection vulnerability has been identified in Omada gateways configured to operate as an OpenVPN Server due to insufficient validation of client-supplied data during OpenVPN connection establishment. An unauthenticated remote attacker may provide specially crafted input influencing backend command execution logic before authentication completes. Exploitation requires the OpenVPN Server feature to be enabled, VPN service reachable by the attacker and attacker to be able to initiate an OpenVPN connection attempt. Successful exploitation may allow arbitrary command execution, potentially leading to full compromise of the affected device. | Mon 26 Oct |
| CVE-2024-5535exploit | 9.1 critical | 6.0% | no CPE yet | Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | 15 Oct |
| CVE-2021-22924exploit | 3.7 low | 6.0% | haxx, fedoraproject, libcurl, fedora, debian_linux | libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. | 14 Oct |
| CVE-2022-23852exploit | 9.8 critical | 5.0% | libexpat_project, netapp, libexpat, clustered_data_ontap, oncommand_workflow_automation | Expat (aka libexpat) before 2.4.4 has a signed integer overflow in XML_GetBuffer, for configurations with a nonzero XML_CONTEXT_BYTES. | 14 Oct |
| CVE-2026-76268exploit | 9.8 critical | 5.0% | splunk | In Splunk Enterprise versions below 10.4.3 and 10.2.7, an unauthenticated user with network access to the Patroni Representational State Transfer (REST) Application Programming Interface (API) on a search head cluster member could execute attacker-controlled operating-system commands. The vulnerability is possible because this interface does not require authentication for critical configuration operations. For more information see Sidecar configuration settings (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/10.2/splunk-sidecars/sidecar-configuration-settings) in the Splunk documentation. Splunk Enterprise versions 10.0.x and 9.4.x are not affected. | 14 Oct |
| CVE-2026-48909exploit ×3 | 9.5 critical | 5.0% | no CPE yet | SP LMS (com_splms) < 4.1.4 by JoomShaper deserializes user-controlled cookie data without validation, enabling an unauthenticated remote attacker to execute arbitrary code on the server. | Sun 25 Oct |
| CVE-2025-25034exploit | 9.3 critical | 5.0% | sugarcrm | A PHP object injection vulnerability exists in SugarCRM versions prior to 6.5.24, 6.7.13, 7.5.2.5, 7.6.2.2, and 7.7.1.0 due to improper validation of PHP serialized input in the SugarRestSerialize.php script. The vulnerable code fails to sanitize the rest_data parameter before passing it to the unserialize() function. This allows an unauthenticated attacker to submit crafted serialized data containing malicious object declarations, resulting in arbitrary code execution within the application context. Although SugarCRM released a prior fix in advisory sugarcrm-sa-2016-001, the patch was incomplete and failed to address some vectors. Exploitation evidence was observed by the Shadowserver Foundation on 2024-09-13 UTC. | Thu 29 Oct |
| CVE-2022-34918exploit ×6 | 7.8 high | 5.0% | linux, debian, linux_kernel, debian_linux, ubuntu_linux | An issue was discovered in the Linux kernel through 5.18.9. A type confusion bug in nft_set_elem_init (leading to a buffer overflow) could be used by a local attacker to escalate privileges, a different vulnerability than CVE-2022-32250. (The attacker can obtain root access, but must start with an unprivileged user namespace to obtain CAP_NET_ADMIN access.) This can be fixed in nft_setelem_parse_data in net/netfilter/nf_tables_api.c. | 14 Oct |
| CVE-2022-2097exploit | 5.3 medium | 5.0% | openssl, fedoraproject, fedora, active_iq_unified_manager | AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p). | 14 Oct |
| CVE-2026-76904exploit ×2 | 9.8 critical | 4.0% | no CPE yet | GeoTools is an open source Java library that provides tools for geospatial data. Starting in version 30.5 and prior to versions 33.6, 34.5, and 33.6, an SQL Injection Vulnerability is present when executing OGC Filters with PostGIS DataStore implementation: `jsonArrayContains` function; Requires PostGIS 12 or greater with a String or JSON field. For PostGIS 12 and greater `jsonArrayContains(<column>, <pointer>, <value>)` function writes `<value>` into generated SQL without escaping. Patches are available in versions 33.6, 34.5, and 33.6. No known workaround is available. To limit scope of SQL Injection the PostGIS connection pool should be configured with limited rights. | 14 Oct |
| CVE-2026-73296exploit ×2 | 9.4 critical | 4.0% | no CPE yet | Microsoft UFO open-source framework for intelligent automation across devices and platforms. Prior to 3.0.8, create_mobile_data_collection_server and create_mobile_action_server in ufo/client/mcp/http_servers/mobile_mcp_server.py exposed Streamable HTTP MCP services on TCP ports 8020 and 8021 without authentication, allowing an unauthenticated remote attacker to invoke capture_screenshot, get_ui_tree, tap, swipe, type_text, launch_app, press_key, and click_control against an ADB-connected Android device, disclose screen and device data, and modify device state. This issue is fixed in version 3.0.8. | 24 Oct |
| CVE-2026-56782exploit | 9.3 critical | 4.0% | no CPE yet | Gorse before 0.5.10 contains an authentication bypass vulnerability in the /api/dump and /api/restore endpoints that allows unauthenticated attackers to access protected functionality when admin_api_key is empty, which is the default configuration. Remote attackers can exfiltrate the entire database including user records, items, and feedback data containing personally identifiable information, or completely overwrite the dataset without authentication. | Sun 25 Oct |
| CVE-2026-41452exploit ×2 | 9.3 critical | 4.0% | no CPE yet | Krayin CRM 2.2.4 contains a missing authentication vulnerability in the installer middleware that allows unauthenticated remote attackers to overwrite the primary administrator account by sending a crafted HTTP POST request with the X-Requested-With: XMLHttpRequest header to bypass the CanInstall middleware redirect check. Attackers can supply arbitrary name, email, and password values to the admin-config-setup endpoint, which performs an unauthenticated updateOrInsert targeting the hardcoded administrator user ID, enabling full administrative access to all CRM data. | 23 Oct |
| CVE-2025-10184exploit ×3 | 8.2 high | 4.0% | no CPE yet | The vulnerability allows any application installed on the device to read SMS/MMS data and metadata from the system-provided Telephony provider without permission, user interaction, or consent. The user is also not notified that SMS data is being accessed. This could lead to sensitive information disclosure and could effectively break the security provided by SMS-based Multi-Factor Authentication (MFA) checks. The root cause is a combination of missing permissions for write operations in several content providers (com.android.providers.telephony.PushMessageProvider, com.android.providers.telephony.PushShopProvider, com.android.providers.telephony.ServiceNumberProvider), and a blind SQL injection in the update method of those providers. | 11 Oct |
| CVE-2021-46143exploit | 7.8 high | 4.0% | libexpat_project, netapp, libexpat, active_iq_unified_manager, clustered_data_ontap | In doProlog in xmlparse.c in Expat (aka libexpat) before 2.4.3, an integer overflow exists for m_groupSize. | 14 Oct |
| CVE-2024-3656exploit | 8.1 high | 3.0% | no CPE yet | A flaw was found in Keycloak. Certain endpoints in Keycloak's admin REST API allow low-privilege users to access administrative functionalities. This flaw allows users to perform actions reserved for administrators, potentially leading to data breaches or system compromise. | 9 Oct |
| CVE-2021-41617exploit | 7.0 high | 3.0% | openbsd, fedoraproject, openssh, fedora, active_iq_unified_manager | sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user. | 14 Oct |
| CVE-2023-51764exploit ×4 | 5.3 medium | 3.0% | postfix, fedoraproject, fedora, enterprise_linux | Postfix through 3.8.5 allows SMTP smuggling unless configured with smtpd_data_restrictions=reject_unauth_pipelining and smtpd_discard_ehlo_keywords=chunking (or certain other options that exist in recent versions). Remote attackers can use a published exploitation technique to inject e-mail messages with a spoofed MAIL FROM address, allowing bypass of an SPF protection mechanism. This occurs because Postfix supports <LF>.<CR><LF> but some other popular e-mail servers do not. To prevent attack variants (by always disallowing <LF> without <CR>), a different solution is required, such as the smtpd_forbid_bare_newline=yes option with a Postfix minimum version of 3.5.23, 3.6.13, 3.7.9, 3.8.4, or 3.9. | 8 Oct |
| CVE-2026-69836exploit ×2 | 10.0 critical | 2.0% | microsoft, entra_id | Deserialization of untrusted data in Microsoft Entra ID allows an unauthorized attacker to execute code over a network. | 18 Oct |
| CVE-2026-55944exploit | 9.8 critical | 2.0% | microsoft, dynamics_nav | Deserialization of untrusted data in Microsoft Dynamics NAV allows an unauthorized attacker to execute code over a network. | Sat 24 Oct |
| CVE-2025-13342exploit ×2 | 9.8 critical | 2.0% | no CPE yet | The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to unauthorized modification of arbitrary WordPress options in all versions up to, and including, 3.28.20. This is due to insufficient capability checks and input validation in the ActionOptions::run() save handler. This makes it possible for unauthenticated attackers to modify critical WordPress options such as users_can_register, default_role, and admin_email via submitting crafted form data to public frontend forms. | 18 Oct |
| CVE-2025-9209exploit | 9.8 critical | 2.0% | no CPE yet | The RestroPress – Online Food Ordering System plugin for WordPress is vulnerable to Authentication Bypass in versions 3.0.0 to 3.1.9.2. This is due to the plugin exposing user private tokens and API data via the /wp-json/wp/v2/users REST API endpoint. This makes it possible for unauthenticated attackers to forge JWT tokens for other users, including administrators, and authenticate as them. | 12 Oct |
| CVE-2026-6644exploit | 9.4 critical | 2.0% | asustor, data_master | A command injection vulnerability was found in the PPTP VPN Clients on the ADM. The vulnerability allows an administrative user to break out of the restricted web environment and execute arbitrary code on the underlying operating system. This occurs due to insufficient validation of user-supplied input before it is passed to a system shell. Successful exploitation allows an attacker to achieve Remote Code Execution (RCE) and fully compromise the system. Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.RR42 as well as from ADM 5.0.0 through ADM 5.1.2.REO1. | Mon 26 Oct |
| CVE-2026-65008exploit ×2 | 9.3 critical | 2.0% | no CPE yet | Grav 2.0.4 (fixed in 2.0.7) contains a remote code execution vulnerability in Blueprint::dynamicData() (system/src/Grav/Common/Data/Blueprint.php), which passes a Class::method callable string and its arguments directly to call_user_func_array() without any allowlist. Because the form plugin routes page frontmatter through this path, an authenticated account with the admin.pages (or api.pages.write) permission can plant a malicious callable directive in a page. The command then executes as the web-server user whenever anyone — including an unauthenticated visitor — accesses the page. | Sat 24 Oct |
| CVE-2026-53519exploit ×2 | 9.1 critical | 2.0% | no CPE yet | Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. Prior to version 2.0.13, fallbackToFrontend in the dashboard's NoRoute handler treats any URL whose raw string starts with /dashboard as an admin-frontend asset request. The check uses strings.HasPrefix, not a path-segment match, so the input /dashboard../data/config.yaml is accepted; strings.TrimPrefix leaves ../data/config.yaml; and path.Join("admin-dist", "../data/config.yaml") normalizes to data/config.yaml — which os.Stat finds and http.ServeFile returns. No authentication required. This issue has been patched in version 2.0.13. | Sun 25 Oct |
| CVE-2026-40047exploit | 9.1 critical | 2.0% | apache, camel | Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component. The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth. This issue affects Apache Camel: from 4.15.0 before 4.18.3. Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers. | Sun 25 Oct |
| CVE-2025-62368exploit | 9.0 critical | 2.0% | no CPE yet | Taiga is an open source project management platform. In versions 6.8.3 and earlier, a remote code execution vulnerability exists in the Taiga API due to unsafe deserialization of untrusted data. This issue is fixed in version 6.9.0. | 8 Oct |
| CVE-2025-53691exploit | 8.8 high | 2.0% | sitecore, experience_commerce, experience_manager, experience_platform | Deserialization of Untrusted Data vulnerability in Sitecore Experience Manager (XM), Sitecore Experience Platform (XP) allows Remote Code Execution (RCE).This issue affects Experience Manager (XM): from 9.0 through 9.3, from 10.0 through 10.4; Experience Platform (XP): from 9.0 through 9.3, from 10.0 through 10.4. | 18 Oct |
| CVE-2026-43503exploit ×10 | 8.8 high | 2.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | 16 Oct |
| CVE-2026-56766exploit | 8.6 high | 2.0% | no CPE yet | Hydra through 9.7, fixed in commit 9cc84c2, contains a stack buffer overflow in NTLM authentication across SMTP, POP3, IMAP, NNTP, HTTP, HTTP-Proxy, and HTTP-Proxy-Urlenum modules when processing malicious NTLM Type-2 challenges. A malicious server can send a crafted NTLM Type-2 challenge with an excessively long domain string, causing base64-encoded response data to overflow a 500-byte stack buffer by 18 to 330 bytes, enabling remote code execution on systems without stack protection. | Sun 25 Oct |
| CVE-2025-12139exploit | 7.5 high | 2.0% | no CPE yet | The File Manager for Google Drive – Integrate Google Drive with WordPress plugin for WordPress is vulnerable to sensitive information exposure in all versions up to, and including, 1.5.3 via the "get_localize_data" function. This makes it possible for unauthenticated attackers to extract sensitive data including Google OAuth credentials (client_id and client_secret) and Google account email addresses. | 18 Oct |
| CVE-2019-10219exploit ×2 | 6.1 medium | 2.0% | redhat, netapp, hibernate_validator, fuse, jboss_data_grid | A vulnerability was found in Hibernate-Validator. The SafeHtml validator annotation fails to properly sanitize payloads consisting of potentially malicious code in HTML comments and instructions. This vulnerability can result in an XSS attack. | 8 Oct |
| CVE-2021-3572exploit | 5.7 medium | 2.0% | pypa, oracle, pip, agile_product_lifecycle_management, communications_cloud_native_core_network_function_cloud_native_environment | A flaw was found in python-pip in the way it handled Unicode separators in git references. A remote attacker could possibly use this issue to install a different revision on a repository. The highest threat from this vulnerability is to data integrity. This is fixed in python-pip version 21.1. | 8 Oct |
| CVE-2022-22970exploit | 5.3 medium | 2.0% | vmware, oracle, spring_framework, financial_services_crime_and_compliance_management_studio, active_iq_unified_manager | In spring framework versions prior to 5.3.20+ , 5.2.22+ and old unsupported versions, applications that handle file uploads are vulnerable to DoS attack if they rely on data binding to set a MultipartFile or javax.servlet.Part to a field in a model object. | 8 Oct |
| CVE-2026-66012exploit | 10.0 critical | 1.0% | no CPE yet | SiYuan before v3.7.2 contains a missing authorization vulnerability in the POST /mcp kernel endpoint, which is gated only by a general auth check (model.CheckAuth) with no admin-role or read-only enforcement. This exposes 31 MCP tools, including a file tool with list/read/write/delete/rename/copy actions across the entire workspace. When the Publish server is enabled in anonymous mode (Conf.Publish.Enable=true and Conf.Publish.Auth.Enable=false), the Publish reverse proxy attaches an anonymous RoleReader JWT to proxied requests, allowing a remote unauthenticated attacker to reach /mcp. The attacker can read conf/conf.json to extract accessAuthCode, api.token, and cookieKey in plaintext, write arbitrary files in the workspace, and plant a plugin into data/plugins/ that executes with nodeIntegration:true and no contextIsolation on the next desktop launch, leading to administrator takeover. | 24 Oct |
| CVE-2026-78162exploit | 10.0 critical | 1.0% | no CPE yet | Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. | 20 Oct |
| CVE-2026-92262exploit | 9.9 critical | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the #mysql50# bypass prefix is affected because it allows the #mysql50# prefix to bypass normal table-name filesystem encoding. An attacker can trigger the issue with a table name using the #mysql50# prefix, then use a #mysql50# table name to access files under their legacy unencoded name and cause crashes, data corruption, data exfiltration, or remote code execution. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. | 21 Oct |
| CVE-2026-44024exploit | 9.8 critical | 1.0% | fluentd | Fluentd collects events from various data sources and writes them to files, RDBMS, NoSQL, IaaS, SaaS, Hadoop and so on. Prior to 1.19.3, Fluentd allows dynamically constructing file paths using the ${tag} placeholder, and insufficient validation of ${tag} in file configurations such as the path parameter of the out_file plugin allows attackers sending untrusted tags containing path traversal characters to write or overwrite arbitrary files and potentially achieve remote code execution. This issue is fixed in version 1.19.3. | Sun 25 Oct |
| CVE-2026-43867exploit | 9.8 critical | 1.0% | apache, camel | Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200). This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write. | Sun 25 Oct |
| CVE-2026-12118exploit | 9.8 critical | 1.0% | ibm, webmethods_integration | IBM webMethods Integration (on prem) 10.15, 10.11 could allow an unauthenticated remote attacker to execute arbitrary code on the system due to the deserialization of untrusted data. | 23 Oct |
| CVE-2026-52924exploit | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | 19 Oct |
| CVE-2026-43501exploit ×2 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | 19 Oct |
| CVE-2026-104585exploit | 9.8 critical | 1.0% | no CPE yet | Mobile Security Framework (MobSF) v4.5.2 is vulnerable to Command Injection in /download_data/, /api/v1/scan, Dynamic Analyzer ADB integration module. | 16 Oct |
| CVE-2026-104748exploit ×2 | 9.8 critical | 1.0% | no CPE yet | The SimpleForm – Form Maker to Chat Apps with Quiz, Poll and Multi Lead Notifications plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.10.0 This is due to the `wp_ajax_nopriv_simpleform_wp_register` AJAX action lacking any capability check for role assignment and the `save_custom_fields_to_user_meta()` function using an exclusion list that omits `wp_capabilities`, combined with `get_form_settings()` returning a hard-coded defaults array that unconditionally enables meta writing regardless of the supplied `form_id`. This makes it possible for unauthenticated attackers to create a new Administrator-level WordPress account by supplying `wp_capabilities[administrator]=1` alongside standard registration fields. The nonce required by the endpoint is publicly emitted into the `front_end_data` JavaScript object on every front-end page via `wp_enqueue_scripts`, making it trivially obtainable by any unauthenticated visitor before submitting the malicious request. | 15 Oct |
| CVE-2026-74727exploit | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip(). | 14 Oct |
| CVE-2026-42880exploit | 9.6 critical | 1.0% | argoproj, argo_cd | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From versions 3.2.0 to before 3.2.11 and 3.3.0 to before 3.3.9, there is a missing authorization and data-masking gap in Argo CD's ServerSideDiff endpoint that allows an attacker with read-only access to extract plaintext Kubernetes Secret data from etcd via the Kubernetes API server's Server-Side Apply dry-run mechanism. This issue has been patched in versions 3.2.11 and 3.3.9. | Mon 26 Oct |
| CVE-2026-48519exploit | 9.6 critical | 1.0% | langflow | Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.2, the "Shareable Playground" (or "Public Flows" in code) contains a critical RCE vulnerability. Shareable Playground feature works by enabling the execution of workflows by unauthenticated users, by accessing a link. Specifically, it enables the route /api/v1/build_public_tmp to execute any public flow, given a public flow ID. When the route executes the flow, it allows for providing arbitrary custom Python code as the nodes code, inside the JSON payload. The vulnerable field is data.nodes[X].data.node.template.code.value. This vulnerability is fixed in 1.9.2. | Mon 26 Oct |
| CVE-2025-12543exploit | 9.6 critical | 1.0% | redhat, build_of_apache_camel, data_grid, fuse | A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions. | 14 Oct |
| CVE-2026-42613exploit | 9.4 critical | 1.0% | no CPE yet | Grav is a file-based Web platform. Prior to 2.0.0-beta.2, the Login::register() method in the Login plugin accepts attacker-controlled groups and access fields from the registration POST data without server-side validation. When registration is enabled and groups or access are included in the configured allowed fields list, an unauthenticated user can self-register with admin.super privileges by injecting these fields into the registration request. This vulnerability is fixed in 2.0.0-beta.2. | Mon 26 Oct |
| CVE-2026-17566exploit | 9.4 critical | 1.0% | pgadmin, pgadmin_4 | pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor). The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing. This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. | 23 Oct |
Download these 264 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.