Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-68775 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: duplicate handshake cancellations leak socket When a handshake request is cancelled it is removed from the handshake_net->hn_requests list, but it is still present in the handshake_rhashtbl until it is destroyed. If a second cancellation request arrives for the same handshake request, then remove_pending() will return false... and assuming HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue processing through the out_true label, where we put another reference on the sock and a refcount underflow occurs. This can happen for example if a handshake times out - particularly if the SUNRPC client sends the AUTH_TLS probe to the server but doesn't follow it up with the ClientHello due to a problem with tlshd. When the timeout is hit on the server, the server will send a FIN, which triggers a cancellation request via xs_reset_transport(). When the timeout is hit on the client, another cancellation request happens via xs_tls_handshake_sync(). Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel path so duplicate cancels can be detected. | 19 Oct |
| CVE-2025-40252 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end() The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate over 'cqe->len_list[]' using only a zero-length terminator as the stopping condition. If the terminator was missing or malformed, the loop could run past the end of the fixed-size array. Add an explicit bound check using ARRAY_SIZE() in both loops to prevent a potential out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 19 Oct |
| CVE-2026-84286 | 9.8 critical | 1.0% | no CPE yet | ExLlamaV3’s EXL3 loader uses an untrusted, model-supplied index to select a CUDA kernel without first verifying that the index is within bounds. A malicious model can force the code to read and invoke an out‑of‑range function pointer, resulting in a reproducible crash. Under specific conditions involving certain host memory layouts, it may be possible for an attacker to exploit this vulnerability to achieve controlled indirect kernel dispatch during model load. | 19 Oct |
| CVE-2026-98323 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length. | 19 Oct |
| CVE-2026-90235 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE xprtsock replaces and restores sk->sk_data_ready and sk->sk_write_space on live sockets with plain stores, and xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain load. These callback pointers are shared with generic socket and protocol paths that may read or invoke them concurrently, so xprtsock needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract that the validated 4022 family applied elsewhere. When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later restores the lower-socket callbacks during teardown, another CPU may still hold an earlier callback snapshot. The plain replace/restore pattern leaves the same visibility hole as the validated 4022 family, so a stale snapshot can still invoke xs_data_ready() or xs_udp_write_space() after the live callback fields have already been restored to the lower-socket handlers. Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space stores in xs_local_finish_connecting(), xs_udp_finish_connecting(), xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use READ_ONCE() for the direct sk_write_space invocation in xs_udp_do_set_buffer_size(). This matches the required callback visibility contract while leaving adjacent sk_state_change and sk_error_report handling unchanged. | 19 Oct |
| CVE-2026-90173 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: free completion queues with ib_free_cq() smbdirect_connection_destroy_qp() creates the send and receive completion queues with ib_alloc_cq_any(), which for IB_POLL_WORKQUEUE arms an internal completion handler that runs ib_cq_poll_work() on a workqueue. Tearing those CQs down with ib_destroy_cq() frees them without first cancelling that poll work. If the provider posts a completion late -- for example Soft-RoCE (rxe) posting an RNR error from rxe_receiver() after rdma_destroy_qp() -- the handler re-queues ib_cq_poll_work() on the already-freed CQ, and a follow-on access faults in rxe_req_notify_cq(). Use ib_free_cq(), which cancel_work_sync()es the poll work before freeing the CQ, so no completion handler can run against a freed queue. [ 1236.599526] ================================================================== [ 1236.602142] BUG: KASAN: slab-use-after-free in ib_cq_poll_work+0xd0/0x1a0 [ 1236.605524] Read of size 8 at addr ffff888111865800 by task kworker/4:1H/82 [ 1236.609017] [ 1236.609270] CPU: 4 UID: 0 PID: 82 Comm: kworker/4:1H Not tainted 7.2.0-rc3-next-20260717-virtme #110 PREEMPT(lazy) [ 1236.609287] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 1236.609498] Workqueue: ib-comp-wq ib_cq_poll_work [ 1236.609525] Call Trace: [ 1236.609536] <TASK> [ 1236.609545] __dump_stack+0x21/0x60 [ 1236.609562] dump_stack_lvl+0xc2/0x100 [ 1236.609573] print_address_description+0x77/0x200 [ 1236.609587] ? ib_cq_poll_work+0xd0/0x1a0 [ 1236.609597] print_report+0x58/0x70 [ 1236.609607] kasan_report+0x117/0x150 [ 1236.609623] ? ib_cq_poll_work+0xd0/0x1a0 [ 1236.609636] ? process_scheduled_works+0x954/0x1600 [ 1236.609650] ib_cq_poll_work+0xd0/0x1a0 [ 1236.609662] ? process_scheduled_works+0x954/0x1600 [ 1236.609674] process_scheduled_works+0xc22/0x1600 [ 1236.609698] ? __pfx_process_scheduled_works+0x10/0x10 [ 1236.609713] ? __pfx_assign_work+0x10/0x10 [ 1236.609726] ? lock_is_held_type+0x7b/0x110 [ 1236.609741] worker_thread+0x975/0xee0 [ 1236.609757] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 1236.609775] ? __kthread_parkme+0x21e/0x260 [ 1236.609789] kthread+0x3a6/0x490 [ 1236.609800] ? __pfx_worker_thread+0x10/0x10 [ 1236.609809] ? __pfx_kthread+0x10/0x10 [ 1236.609820] ret_from_fork+0x55a/0xa20 [ 1236.609835] ? __pfx_ret_from_fork+0x10/0x10 [ 1236.609850] ? __pfx_kthread+0x10/0x10 [ 1236.609861] ret_from_fork_asm+0x1a/0x30 [ 1236.609880] </TASK> [ 1236.609886] [ 1236.661292] Allocated by task 5076: [ 1236.662640] kasan_save_track+0x3e/0x80 [ 1236.663842] __kasan_kmalloc+0x72/0x90 [ 1236.664763] __kmalloc_noprof+0x2b0/0x5d0 [ 1236.665356] __ib_alloc_cq+0x284/0x1000 [ 1236.666573] __ib_alloc_cq_any+0x23e/0x340 [ 1236.668654] smbdirect_connection_create_qp+0x6f7/0x1070 [ 1236.669757] smbdirect_accept_connect_request+0x500/0x1ca0 [ 1236.672625] smbdirect_listen_rdma_event_handler+0x1655/0x1c50 [ 1236.673930] cma_listen_handler+0x1bf/0x260 [ 1236.674923] cma_cm_event_handler+0x128/0x380 [ 1236.676926] cma_ib_req_handler+0x2d3d/0x4de0 [ 1236.678368] cm_process_work+0xb0/0x530 [ 1236.680454] cm_queue_work_unlock+0xb1/0x230 [ 1236.681673] cm_work_handler+0x969f/0xdca0 [ 1236.682704] process_scheduled_works+0xc22/0x1600 [ 1236.683447] worker_thread+0x975/0xee0 [ 1236.685901] kthread+0x3a6/0x490 [ 1236.688164] ret_from_fork+0x55a/0xa20 [ 1236.689522] ret_from_fork_asm+0x1a/0x30 [ 1236.690073] [ 1236.690378] Freed by task 5137: [ 1236.692242] kasan_save_track+0x3e/0x80 [ 1236.694272] kasan_save_free_info+0x40/0x50 [ 1236.695514] __kasan_slab_free+0x3a/0x60 [ 1236.696773] kfree+0x14e/0x4e0 [ 1236.697216] ib_destroy_cq_user+0x18d/0x250 [ 1236.699817] smbdirect_connection_destroy_qp+0xf2/0x280 [ 1236.702115] smbdirect_socket_destroy_sync+0x1607/0x2720 [ 1236.704062] smbdirect_socket_release+0x140/0x280 [ 1236.705286] smb_direct_free_transpor ---truncated--- | 19 Oct |
| CVE-2026-90151 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the callback IDR removal helper callable by the allocation failure path, and remove the callback identifier before freeing the client. This was found by a local static-analysis checker for publish-before-free lifetime bugs and confirmed by manual inspection. | 19 Oct |
| CVE-2026-90048 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list() ni_create_attr_list() allocates a fixed buffer of al_aligned(record_size) (== record_size) bytes and then walks every attribute of the primary MFT record, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor by le_size(name_len), with no check against the end of the buffer; the total size is only computed after the loop. A minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24) bytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32) bytes in the list. Because the number of attributes in a record is not bounded (mi_enum_attr() accepts arbitrarily many equal-type, nameless minimum-size attributes), a crafted record packed with such attributes produces a list larger than record_size and overflows the heap buffer. This is reachable from a crafted, loop-mounted NTFS image: opening the file and adding an attribute (e.g. via setxattr) drives ntfs_set_ea() -> ni_insert_resident() -> ni_insert_attr() -> ni_ins_attr_ext() -> ni_create_attr_list(). BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0xc48/0x1058 Write of size 4 at addr ffff000008984c00 by task setfattr/345 ni_create_attr_list+0xc48/0x1058 ni_ins_attr_ext+0x510/0x7c0 ni_insert_attr+0x3f8/0x70c ni_insert_resident+0xc8/0x3b0 ntfs_set_ea+0x66c/0xd28 ntfs_setxattr+0x4d8/0x5b0 __arm64_sys_setxattr+0xa4/0x124 Allocated by task 345: ni_create_attr_list+0x188/0x1058 The buggy address belongs to the cache kmalloc-1k of size 1024 (the write lands at object+1024). Size the buffer from the actual attributes instead of assuming a single record_size is always enough. | 19 Oct |
| CVE-2026-90038 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during export state revocation nfsd4_revoke_export_states() has the same use-after-free as nfsd4_revoke_states(): it drops nn->client_lock across revoke_one_stid() and the following read of clp->cl_minorversion, but the stateid reference it holds does not pin the client. A teardown racing the dropped lock can free the client while revoke_one_stid() still dereferences it. exportfs -u drives this path through NFSD_CMD_UNLOCK_EXPORT, so an administrator removing an export can race a client expiry. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states(). | 19 Oct |
| CVE-2026-90012 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps TX but leaves tx_sg_mapped set. If TX mapping fails on a later transfer, mappings created for earlier transfers remain active. In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they are assigned only after every transfer has been mapped. The subsequent spi_unmap_msg() may therefore unmap the TX mapping again or release earlier mappings using a NULL or stale device. Using a NULL device can trigger an oops. An empty SG table does not prevent the NULL dereference because dma_unmap_sg_attrs() accesses the device before checking the entry count. Publish both mapping devices before mapping starts and unwind all failures through __spi_unmap_msg(). This clears the mapping flags and releases each mapping once with the device that created it. Publishing the devices before the loop also refreshes them when no transfer needs mapping. No mapping flag is set in that case, so current users do not use the pointers as mapping owners. | 19 Oct |
| CVE-2026-89990 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE [..] pc : ceph_mds_check_access+0xd4/0x550 lr : ceph_mds_check_access+0xc8/0x550 [...] Call trace: ceph_mds_check_access+0xd4/0x550 (P) ceph_atomic_open+0x138/0xbe8 path_openat+0xa24/0xfa8 do_filp_open+0x94/0x158 do_sys_openat2+0x88/0xf8 | 19 Oct |
| CVE-2026-89970 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: Synchronize timeout work during SQ teardown nvmet_auth_sq_free() cancels auth_expired_work with cancel_delayed_work(). If the work has already started, cancellation does not wait for the callback. Transport teardown can consequently free or reuse the queue containing struct nvmet_sq while nvmet_auth_expired_work() still accesses that SQ. Add a teardown-specific helper that synchronously drains the delayed work before freeing authentication state, and use it from nvmet_sq_destroy(). Keep the non-synchronous helper for in-band authentication state cleanup, where the SQ owner remains alive. | 19 Oct |
| CVE-2026-89969 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU nvmet_tcp_try_recv_pdu() reads a PDU header into the fixed 128-byte queue->pdu union, then computes the remaining payload length as queue->left = hdr->hlen - queue->offset + hdgst; and reads that many more bytes into &queue->pdu + queue->offset, without ever bounding the result against sizeof(queue->pdu). A struct nvme_tcp_icreq_pdu is itself 128 bytes, exactly the size of the union. Once a header digest has been negotiated (hdgst = 4), a second ICReq passes the hlen == nvmet_tcp_pdu_size() check but yields queue->left = 128 - 8 + 4 = 124, so bytes 8..132 are written into the 128-byte buffer -- 4 bytes past its end, over queue->hdr_digest and queue->data_digest. Those bytes are attacker-controlled (an ICReq carries no digest), and the duplicate ICReq is only rejected later, after the overflow. A remote unauthenticated host can thus corrupt kernel memory adjacent to the receive buffer. Reject any PDU whose declared length would read past the end of queue->pdu before the second recv. | 19 Oct |
| CVE-2026-89857 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held: - qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and - qla2xxx_process_purls_pkt(), run from the purex work/DPC context. Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can run concurrently with normal I/O submission on the base ring and corrupt the ring producer state, leading to duplicated or dropped commands. The third caller, qla2xxx_process_purls_iocb(), runs inside qla24xx_process_response_queue() with the qpair lock already held and is safe; that is also why the lock cannot be taken inside the helper itself (it would recursively re-acquire hardware_lock on the response path). Take qp_lock_ptr around the two unlocked callers and document the helper as caller-locked. Both run in process context, so spin_lock_irqsave() is used and nothing in the locked region sleeps. | 19 Oct |
| CVE-2026-89847 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking whether the SRB was actually found and removed. If the response ISR completes the same handle first, it removes the SRB under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The submitter qla24xx_control_vp() wakes from wait_for_completion(), clears sp->comp, drops its reference and returns, reclaiming the on-stack completion. The timer reference keeps the SRB alive across the timeout handler, but not the submitter's stack. The timeout then issues a second sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp) complete(sp->comp)"; with the pointer loaded before the submitter's NULL store, complete() writes into the freed stack frame, a use-after-free. Track whether this path removed the SRB from outstanding_cmds and only call sp->done() when it did, so the command is completed exactly once by whichever path owns it. This mirrors the sp_found guard already used in qla24xx_abort_iocb_timeout(). | 19 Oct |
| CVE-2026-89783 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full The depth check in xfrm6_input_addr() is off by one: if (1 + sp->len == XFRM_MAX_DEPTH) goto drop; ... sp->xvec[sp->len++] = x; xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode receive path re-enters IPv6 input via xfrm_trans_reinject() with that secpath preserved. If the inner packet carries a destination-options HAO option or a type-2 routing header, xfrm6_input_addr() is called with sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS flags it and panics under panic_on_warn. Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also restores one chain level the old check rejected at sp->len == 5. UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10 index 6 is out of range for type 'xfrm_state *[6]' | 19 Oct |
| CVE-2026-89778 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: isofs: fix out-of-bounds page array access on empty zisofs block zisofs_uncompress_block()'s empty-block fast path returns pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the decompression path which returns bytes produced relative to poffset. zisofs_fill_pages() uses that return to advance its page cursor, so when the zisofs block size is below PAGE_SIZE and a sub-page block leaves poffset partway into a page, a following empty block over-counts and advances pages[] one element past its end, after which "if (poffset && *pages)" reads pages[1] out of bounds. rock.c only rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a compressed file on such a mounted ISO9660 image. Return the byte count relative to poffset and zero only [poffset, PAGE_SIZE) of the first page, matching the decompression path. The page-aligned case (poffset == 0) is unaffected. BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290) Read of size 8 at addr ffff88800f5eac48 by task exploit/142 zisofs_read_folio (fs/isofs/compress.c:290) read_pages (mm/readahead.c:184) ... filemap_read (mm/filemap.c:2814) vfs_read (fs/read_write.c:574) __x64_sys_pread64 (fs/read_write.c:769) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address is located 0 bytes to the right of the allocated 8-byte region in the kmalloc-8 cache | 19 Oct |
| CVE-2026-89712 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with list_for_each_entry_safe(ni, tmp, ...). For each expired entry it sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the source vfsmount, then reacquires the lock to list_del + kfree the entry and continue iterating via the macro's saved tmp pointer. The nsui_busy flag protects the current ni from concurrent nfsd4_ssc_setup_dul() finders during the lock-drop window, but it does not pin tmp. Another nfsd RPC thread that fails its source- server mount and reaches nfsd4_ssc_cancel_dul() will, during that same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount item, and release the lock. If that item is the saved tmp of the expire walk, the next iteration dereferences a freed nfsd4_ssc_umount_item. Restart the walk from the head after the mntput() unlock window so no saved next pointer survives the lock-drop. The list is bounded by the number of active inter-server source mounts (typically small) and the expire delayed-work runs periodically rather than per-IO, so the restart is cheap. | 19 Oct |
| CVE-2026-89703 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked delegations but does not set SC_STATUS_FREED before releasing cl_lock. revoke_delegation() uses this flag to detect whether FREE_STATEID has already processed the delegation -- without it, the freed delegation is added to cl_revoked via list_add(), producing a use-after-free when cl_revoked is later traversed in __destroy_client(). The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already sets SC_STATUS_FREED correctly. Apply the same pattern to the SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). | 19 Oct |
| CVE-2026-89689 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: don't free session slots that are still in use nfsd4_sequence() can free the very slot it is currently processing. When the session shrinker has reduced se_target_maxslots below se_fchannel.maxreqs, the shrink path checks three conditions before calling free_session_slots(): 1. se_target_maxslots < maxreqs (shrink was advertised) 2. slot->sl_generation == se_slot_gen (slot is up-to-date) 3. seq->maxslots <= se_target_maxslots (client acknowledges) However, seq->slotid is never checked against se_target_maxslots. A client using a slot in the range [se_target_maxslots, maxreqs) can satisfy all three conditions: its slot has the current generation (set by a prior SEQUENCE), and it sends sa_highest_slotid <= se_target_maxslots to acknowledge the reduction. free_session_slots() then kfrees every slot at index >= se_target_maxslots, including the caller's own slot. The function continues to write sl_seqid, sl_flags, sl_generation, and stores the dangling pointer in cstate->slot. Later, nfsd4_store_cache_entry() copies up to maxresp_cached bytes of the compound reply into the freed sl_data[] array, corrupting whatever slab object now occupies that address. Additionally, a concurrent thread processing SEQUENCE on a different high-numbered slot can have its slot freed out from under it. NFSD4_SLOT_INUSE is set under nn->client_lock before the lock is released, so any concurrent thread past SEQUENCE will have its slot marked. However, free_session_slots() does not check NFSD4_SLOT_INUSE before freeing. Fix both problems by: 1. Checking that the current request's slotid is below the shrink boundary. 2. Scanning slots in the to-be-freed range for NFSD4_SLOT_INUSE and deferring the shrink if any are active. | 19 Oct |
| CVE-2026-89688 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: drop the stateid, not the stateowner, on seqid_op replay retry In nfs4_preprocess_seqid_op() the stateid is obtained from nfsd4_lookup_stateid(), which holds a reference on the nfs4_stid (sc_count) but takes no reference on the stateowner. openlockstateid() merely casts that stid and likewise takes no reference. When nfsd4_cstate_assign_replay() returns -EAGAIN (the replay owner is being torn down, RP_UNHASHED) it has not taken a stateowner reference on that path. The error handling nevertheless called nfs4_put_stateowner(stp->st_stateowner), dropping an so_count reference the function never acquired -- risking a stateowner refcount underflow and use-after-free -- while leaking the sc_count reference held on the stid. The leaked stid reference can also stall a concurrent nfsd4_close_open_stateid() waiting for sc_count to drop. Drop the reference actually held -- the stid -- before retrying. The stateowner stays alive through the reference held by the stid. This mirrors the open path in nfsd4_process_open1(), where the put balances a reference that path explicitly holds on the stateowner. | 19 Oct |
| CVE-2026-89681 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix layout fence worker double-reference race The workqueue core clears WORK_STRUCT_PENDING before the callback is invoked, so delayed_work_pending() in lm_breaker_timedout() can return false while the fence worker is already running. This lets the breaker take a duplicate sc_count reference and schedule a new worker that coalesces with the in-progress one. The extra reference is never put, leaking the layout stateid. Replace the racy delayed_work_pending() check with an ls_fence_inflight boolean set atomically with refcount_inc_not_zero() under ls_lock, and cleared under ls_lock before the final nfs4_put_stid() on the dispose path; the retry path intentionally retains it. Remove the self-rearm mod_delayed_work() at the top of the worker. | 19 Oct |
| CVE-2026-89677 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix possible fh_compose of wrong dentry in nfsd4_create_file() dentry_create() can hypothetically provide a different dentry than the one passed in. This could happen, for example, if the exported filesystem is NFS, and the server returned to OPEN a filehandle which matched a directory that was already in the dcache. Clearly this would not be expected! If this were to happen the dentry (child) that was already stored in resfhp could be freed and later dereferenced. We shouldn't call fh_compose() until we are certain that we have the final dentry, so this patch moved the fh_compose() call to two places: one for the case where the target already exists, and one after dentry_create() where it was created. | 19 Oct |
| CVE-2026-89674 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR length calculation in nfsd4_ff_encode_layoutget The XDR buffer size calculation in nfsd4_ff_encode_layoutget() has multiple errors that can result in either an out-of-bounds write or leaking uninitialized kernel memory to the client: - fh_len doesn't account for XDR padding on the file handle data - uid and gid lengths use "8 + len" but xdr_encode_opaque() actually writes "4 + xdr_align_size(len)" bytes - ds_len omits the flags and stats_collect_hint fields (8 bytes), while len's header constant overestimates by 8 bytes -- these partially cancel but leave a net mismatch The worst case occurs with short strings (e.g. uid=0, gid=0 with an odd-sized file handle), where the function writes up to 5 bytes past the reserved XDR buffer. Conversely, when string lengths happen to be 4-byte aligned, the reservation is too large and stale buffer content is sent to the client. Fix this by breaking out every encoded field explicitly in the ds_len calculation, using xdr_align_size() for all variable-length opaque fields, and correcting the header constants. | 19 Oct |
| CVE-2026-89669 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize copy-notify stateid before publishing it nfsd4_copy_notify() finished initializing the cpntf state after nfs4_alloc_init_cpntf_state() had already linked it into the s2s_cp_stateids IDR and the parent's sc_cp_list, with cs_count == 1 (the membership reference) and none held for the caller. A racing OFFLOAD_CANCEL (crafted cl_id == nn->s2s_cp_cl_id plus the guessable so_id) could reach manage_cpntf_state() and free the entry, turning the caller's subsequent cpn_cnr_stateid read and cp_p_stateid/cp_p_clid writes into use-after-free. The owning clientid was also only recorded after publication, so it could not gate an ownership check in that window. Record cp_p_stateid and cp_p_clid inside nfs4_alloc_init_cpntf_state() before nfs4_init_cp_state() publishes the entry, and return it with an extra reference. The caller reads the stateid under that reference and drops it with nfs4_put_cpntf_state(); on a late error the laundromat reaps the entry. | 19 Oct |
| CVE-2026-89662 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent lock owner use-after-free during client teardown __destroy_client() releases a client's open owners, but a lock owner whose only reference is a blocked lock (nbl) stays on cl_ownerstr_hashtbl. client_has_state() does not count a bare owner, so DESTROY_CLIENTID can reach __destroy_client() with such owners present. __destroy_client() then walks the table, calling remove_blocked_locks() on each owner without a reference. Freeing a blocked lock drops the owner reference held via flc_owner. The per-net laundromat reaps blocked locks from nn->blocked_locks_lru independently of client state. The two paths share blocked_locks_lock only for the list splice, not the owner's lifetime. The laundromat therefore frees the owner as __destroy_client() dereferences it, a NULL dereference in remove_blocked_locks(). nfsd4_release_lockowner() holds a reference across the same call; __destroy_client() does not. Hold cl_lock across the walk, taking a reference and unhashing each owner, then drop it before remove_blocked_locks() and nfs4_put_stateowner(), which take blocked_locks_lock and cl_lock. | 19 Oct |
| CVE-2026-89660 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during admin state revocation A stateid holds only a bare pointer to its nfs4_client; a stateid reference does not pin it. The client survives only because __destroy_client() drains its stateids before free_client() runs. nfsd4_revoke_states() drops nn->client_lock across revoke_one_stid(), which dereferences the client to revoke a stateid and read clp->cl_minorversion. A teardown racing the dropped lock can free the client first. Pinning cl_rpc_users under client_lock blocks the DESTROY_CLIENTID and EXCHANGE_ID teardown, which refuses while cl_rpc_users is non-zero. force_expire_client() ignores it: once its wait for cl_rpc_users to reach zero has passed, a later pin goes unnoticed. Under client_lock, skip a client whose cl_time is already zero -- force_expire_client() clears it there before waiting -- otherwise pin cl_rpc_users before dropping the lock. The walk then either sees the expiry and skips, or pins in time for that wait to cover the revoke. | 19 Oct |
| CVE-2026-89658 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during NFSv4.0 revoked-state cleanup nfs40_clean_admin_revoked() takes a stateid reference under clp->cl_lock, drops nn->client_lock, and calls nfsd4_drop_revoked_stid(), which dereferences the stateid's client through s->sc_client->cl_lock. The stateid reference does not pin the client, so a teardown racing the dropped lock can free the client while nfsd4_drop_revoked_stid() is still using it. This cleanup runs from the laundromat, so a periodic sweep can race force_expire_client() driven by a write to the clients/<id>/ctl file. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states(). | 19 Oct |
| CVE-2026-89656 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: reject buckets with mismatched CRUSH ids crush_decode() stores bucket data by array slot, and the mapper later derives the per-bucket workspace index from the decoded bucket id. A malformed map can therefore make one bucket reuse another bucket's workspace by encoding an id different from -1 - slot. For uniform buckets, the second replica selection expands the source bucket's permutation into that aliased workspace buffer. If the source bucket is larger than the aliased bucket, the write runs past the smaller permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN reports a slab OOB write of 4 bytes in bucket_perm_choose(). Reject buckets whose encoded id does not match their array slot. Valid CRUSH maps already use the canonical negative id corresponding to the bucket slot, so this restores the invariant expected by work->work[-1 - in->id] without changing valid map behavior. | 19 Oct |
| CVE-2026-89655 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock list_for_each_entry() iterates ci->i_cap_flush_list but drops i_ceph_lock to send cap messages. During the unlock window, handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries with tid <= flush_tid from the list, release i_ceph_lock, and free them via ceph_free_cap_flush() outside any lock. When the original thread reacquires i_ceph_lock and the for-loop macro advances via cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next on freed memory. The race timeline: __kick_flushing_caps() handle_cap_flush_ack() ----------------------- ----------------------- holds i_ceph_lock <--- iterates to cf (tid=10) prepares FLUSH message drops i_ceph_lock <--- __send_cap() ── FLUSH(tid=10) MDS sends FLUSH_ACK(tid=10) ---> acquires i_ceph_lock cf->tid(10) <= flush_tid(10), detaches cf from i_cap_flush_list drops i_ceph_lock ceph_free_cap_flush(cf) <- frees it! acquires i_ceph_lock <--- for-loop advances: cf = list_next_entry(cf, i_list) -- UAF on freed cf->i_list.next The cf was just sent by __kick_flushing_caps itself via __send_cap(). The MDS may respond with FLUSH_ACK quickly enough that handle_cap_flush_ack() frees cf before __kick_flushing_caps can finish the iteration. Fix by converting to a manual while loop: save the next pointer under i_ceph_lock before dropping it, then use the saved pointer after reacquiring, so the potentially-freed cf is never accessed again. | 19 Oct |
| CVE-2026-89653 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode MDSMap export_targets entries are monitor controlled. check_new_map() uses each entry as a bit number in a fixed stack bitmap, so a rank outside the protocol namespace can make set_bit() write past the end of the array. Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not validate against possible_max_rank here because maps may legitimately reference ranks beyond a temporarily reduced max_mds. | 19 Oct |
| CVE-2026-89652 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: bound copied dentry name length in NFS export get_name ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). | 19 Oct |
| CVE-2026-89651 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: bound MDSCapAuth path and fs_name decode in handle_session() handle_session() decodes the MDSCapAuth records carried by a CEPH_SESSION_OPEN message (msg_version >= 6). For each record the match.path and match.fs_name byte strings are read by first decoding a 32-bit length and then copying that many bytes with the bare ceph_decode_copy(). Unlike the surrounding fields, which all use the _safe decode variants, these two copies are not preceded by a ceph_decode_need() bounds check, and the enclosing MDSCapAuth and MDSCapMatch struct_len fields are skipped rather than enforced as an upper bound. A length larger than the bytes remaining in the message front makes ceph_decode_copy() read past the end of the front buffer. The message front is a dedicated allocation (ceph_msg_new2() -> kvmalloc), so the over-read runs off that object. A malicious or compromised MDS can trigger this with the first post-connect message on mount, with no client-side user interaction; under KASAN it is reported as a slab-out-of-bounds read in handle_session(). Impact: a malicious MDS can force the kernel client to read up to 4 GiB past the message front allocation during session setup, crashing the client (out-of-bounds read). Switch both copies to ceph_decode_copy_safe(), which performs the ceph_decode_need() bounds check before the copy and branches to the existing bad label, matching the rest of the decoder and the error path that frees the partially decoded cap_auths array. | 19 Oct |
| CVE-2026-89643 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: audit: avoid dropping live tree ref on fsnotify rule autoremove audit_del_rule() is used for both netlink deletion templates and internal fsnotify autoremove. The former passes a parsed template which owns a temporary tree reference; the latter passes the installed entry itself. The unconditional audit_put_tree() at the end of audit_del_rule() assumes the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify autoremove event therefore drops the installed rule's live tree reference. Repeating this across rules sharing the same tree can free the tree while another rule still references it, and a later autoremove dereferences the freed pathname while comparing rules. Move the temporary-tree put to audit_rule_change(), the caller that owns deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both successful deletion and -ENOENT still release the parser-owned tree. [PM: dropped unnecessary comment for line length reasons] | 19 Oct |
| CVE-2026-89637 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers. | 19 Oct |
| CVE-2026-89636 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | 19 Oct |
| CVE-2026-89635 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened. | 19 Oct |
| CVE-2026-89614 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the free-cluster bitmap scan to the volume vol->lcn_empty_bits_per_page is sized from vol->nr_clusters at mount, but ntfs_cluster_alloc() bounds its scan of that array by the size of $Bitmap. Those are independent on-disk quantities and the mount-time check only rejects a $Bitmap that is too small, so an image whose $Bitmap covers more clusters than the volume has lets the scan index past the array. A run whose LCN lies in that gap takes the allocator straight there, since the caller passes the file's own last LCN as its locality hint. KASAN reports a slab out-of-bounds read when a file on such a volume is extended. Clamp the scan to what that array covers, mirroring the max_index calculation the mount-time scan already uses, and reject a decoded LCN at or beyond nr_clusters in the mapping pairs decoder. Conforming volumes are unaffected. | 19 Oct |
| CVE-2026-89613 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid empty mapping pairs Reject an attribute with empty mapping pairs if it has inconsistent highest VCN and size. | 19 Oct |
| CVE-2026-89612 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid MFT LCNs from boot sector The NTFS boot sector stores the MFT and MFTMirr locations as unsigned 64-bit LCNs, but parse_ntfs_boot_sector() decoded them into an s64. A crafted high-bit value could therefore become negative and pass the existing upper-bound check. The invalid value then propagated into the MFT zone allocator and could result in an out-of-bounds access to lcn_empty_bits_per_page. | 19 Oct |
| CVE-2026-89611 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attribute name when converting between non-sparse and sparse attributes. Converting to sparse also adds the compressed_size field before the name and mapping pairs, requiring eight additional bytes in the attribute record. However, the validator does not check that name_offset is within safe boundaries for these operations or that the additional space is available. A malicious MFT record could set name_offset such that: 1. The name is positioned at the very end of a non-sparse attribute. Converting to sparse would shift the name forward by 8 bytes, writing beyond the attribute boundary. 2. The name overlaps with the mapping pairs, causing corruption during conversion. Add validation to ensure: - For named attributes, name_offset is within valid bounds - Name does not extend beyond the attribute or overlap with mapping pairs - For non-sparse, non-compressed attributes, eight bytes are available after mapping_pairs_offset for the compressed_size field The space check also covers unnamed attributes, for which name_offset = 0 is valid and no name range needs to be checked. | 19 Oct |
| CVE-2026-89610 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: verify run length exceeding volume boundary The mapping pairs decoder validates that the starting LCN is within the volume but does not check if the run extends beyond the volume boundary. A malformed NTFS image with a crafted mapping pairs array could cause the kernel to access memory beyond the volume boundary, potentially leading to memory corruption and privilege escalation. Add validation to ensure lcn + length stays within nr_clusters. | 19 Oct |
| CVE-2026-89558 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix still_degraded being inverted in raid10_sync_request() Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into bitmap_operations") converted still_degraded from int to bool, but inverted the assignment in the loop that checks whether the array will still be degraded after the current device is recovered: "still_degraded = 1" became "still_degraded = false". As a result, recovering a device while another mirror is still missing calls md_bitmap_start_sync() with degraded == false, which clears bitmap bits that the still-missing device needs. When that device is re-added, its bitmap-based recovery finds the bits already cleared and skips every region written while the array was degraded, so it is marked In_sync while holding stale data: silent corruption. Reproducer (raid10 near=2, 4 disks, internal bitmap): - fail and remove one disk of each mirror pair - write to the degraded array - re-add both disks and let recovery finish - "check" reports mismatch_cnt=262272 after 256 MiB of degraded writes and file contents differ; the second disk's "recovery" completes in milliseconds because everything is skipped The same conversion in raid1 got it right (still_degraded = true). Restore the correct value. | 19 Oct |
| CVE-2026-89555 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mpls: reload header after pskb_may_pull() mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop when an MPLS route has multiple nexthops. While walking the MPLS label stack, the hash routine caches hdr for the current label. After finding the bottom-of-stack label, it calls pskb_may_pull() before reading the inner IP header. If an skb is constructed with the inner IP header in nonlinear data and insufficient tailroom in the linear head, pskb_may_pull() calls pskb_expand_head() to replace the skb head and free the old one. This leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr again when it performs a second pull for the larger header. The issue was found through static analysis. A reproducer sending a legal Geneve packet through a bareudp/MPLS multipath setup triggered the same KASAN report in 2 of 2 unpatched runs: BUG: KASAN: slab-use-after-free in mpls_select_multipath Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23 Call Trace: mpls_select_multipath mpls_forward __netif_receive_skb_list_core netif_receive_skb_list_internal napi_complete_done gro_cell_poll __napi_poll net_rx_action Freed by task 23: kfree pskb_expand_head __pskb_pull_tail mpls_select_multipath Reload hdr from the current skb head after each successful pull before deriving the inner IPv4 or IPv6 header pointer. | 19 Oct |
| CVE-2026-89551 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by walking the tail, pages, and head iovecs. Each per-section step uses min_t() so it never removes more bytes than that section holds, but the final accounting at the fix_len label subtracts the total bytes actually consumed from buf->len without any clamp: fix_len: buf->len -= (len - trim); When the caller has set buf->len to a value smaller than the sum of the iov_lens, (len - trim) can exceed buf->len and the unsigned subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches xdr_buf_trim() in exactly that state: buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip; buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip); xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip); buf->len is a small wire-derived value while the iov_lens are at page scale, so the per-section loops legitimately consume far more bytes than buf->len records. The wrapped buf->len then propagates as the authoritative stream bound into every downstream XDR decoder. Fix by clamping the decrement so buf->len bottoms out at zero: buf->len -= min_t(unsigned int, buf->len, len - trim); On the normal path where the iov_lens sum to buf->len, (len - trim) is always <= buf->len and the result is identical to before. No callers change behavior outside the underflow case. | 19 Oct |
| CVE-2026-89546 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: close backchannel before destroying callback service A backchannel receive can complete a request while the NFS callback service is being torn down. xprt_complete_bc_request() removes the request from bc_pa_list, drops bc_alloc_count, marks the request in use, and then asks xprt_enqueue_bc_request() to hand it to the callback service. If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request() currently returns without enqueueing or freeing the committed request. The xprt_get() taken on entry is leaked as well. If the producer wins the race before bc_serv is cleared, it can also enqueue onto sv_cb_list after nfs_callback_down() has stopped the callback threads, leaving the request linked to a svc_serv that is about to be freed. Close the producer side before callback threads are stopped. Add xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call it on callback shutdown and callback-start failure before stopping the service threads. Requests that lose the NULL transition in xprt_enqueue_bc_request() are released through the normal backchannel free path after balancing bc_slot_count. Finally, drain any remaining sv_cb_list requests after the callback threads have stopped and before svc_destroy() frees the service. | 19 Oct |
| CVE-2026-89542 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_krb5_unwrap_v2 against short tokens gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN (16) bytes long, and its rotate_left() helper passes buf->len - base to xdr_buf_subsegment() without verifying that base <= buf->len. When a caller hands in a sub-16-byte token, or a token whose declared len leaves base past the end of the buffer, three distinct failures follow: gss_krb5_unwrap_v2(offset, len, buf) ptr = buf->head[0].iov_base + offset ec = *(ptr + 4) /* OOB read on short head */ rrc = *(ptr + 6) /* OOB read on short head */ rotate_left(offset + 16, buf, rrc) xdr_buf_subsegment(buf, &subbuf, base, buf->len - base) /* u32 wrap when base > len */ _rotate_left(&subbuf, shift) shift %= buf->len /* divide-by-zero when base == len */ After decryption, the cleanup arithmetic has the same shape: movelen = min_t(unsigned int, buf->head[0].iov_len, len); movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip; BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen > buf->head[0].iov_len); The BUG_ON re-adds the value just subtracted, so it reduces to min(A, B) > A and is permanently false; it cannot catch the unsigned underflow of movelen, which then drives a ~UINT_MAX-byte memmove(). Add four defense-in-depth guards inside the unwrap core so it is safe regardless of what its callers validate: - reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before touching ptr+4/ptr+6; - bail from rotate_left() when buf->len <= base, covering both the underflow and zero-length cases; - return early from _rotate_left() when buf->len is zero, so the shift %= buf->len modulo cannot fault; - replace the dead BUG_ON with a live check that returns GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. | 19 Oct |
| CVE-2026-89541 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: harden gss_unwrap_resp_priv length checks gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with offset = (u8 *)(p) - (u8 *)head->iov_base; if (offset + opaque_len > rcv_buf->len) goto unwrap_failed; maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, offset + opaque_len, rcv_buf); Both operands are u32 and the sum is computed in u32. A reply with opaque_len near 0xffffffff makes offset + opaque_len wrap to a small value that is below rcv_buf->len, so the bound check passes and gss_unwrap() is called with end < begin. The check also lacks a lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt header reads at ptr+4 and ptr+6 then run past the token. A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the rotate_left() loop that follows. Fix by replacing the single combined check with three guards that are safe in u32 arithmetic and that enforce the RFC 4121 minimum outer token length: if (offset > rcv_buf->len) goto unwrap_failed; if (opaque_len > rcv_buf->len - offset) goto unwrap_failed; if (opaque_len < GSS_KRB5_TOK_HDR_LEN) goto unwrap_failed; The first guard makes the subtraction in the second guard unconditionally safe; offset is derived from a successful xdr_inline_decode() in the head kvec, so in practice it already satisfies the bound. The floor mirrors the server-side check added in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token minimum length"). | 19 Oct |
| CVE-2026-89538 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->len to a logical length, which can be much smaller than head[0].iov_len (the allocated receive-page capacity). It then calls xdr_buf_trim() with a trim length derived from the 16-bit "extra count" (ec) field in the Kerberos v2 token header. The ec field is authenticated by the post-decrypt memcmp() against the encrypted header copy, so a randomly-mutated value is rejected. However, any peer holding a valid GSS context can legitimately encrypt a token whose ec exceeds the plaintext length. Per RFC 4121, such a token is structurally malformed. Although xdr_buf_trim() now clamps the buf->len subtraction to avoid unsigned underflow, the buffer is still left in a semantically invalid state (zero length, inconsistent iov lengths) when ec is oversized. Reject these tokens before calling xdr_buf_trim(), giving callers a well-defined GSS_S_DEFECTIVE_TOKEN error and keeping the xdr_buf internally consistent. The wrapped blob begins at a nonzero offset -- both callers pass len as offset + opaque_len -- so buf->len still counts the offset bytes that precede the blob. Compare the trim length against the remaining wrapped segment, buf->len - offset, rather than the whole buffer; comparing against buf->len alone leaves an offset-wide window in which an oversized ec passes the test and xdr_buf_trim() cuts into the bytes ahead of the blob. | 19 Oct |
| CVE-2026-89536 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: wait for in-flight client TLS handshake callback xs_tls_handshake_sync() gives xs_tls_handshake_done() a reference to the lower transport before submitting the handshake request. On timeout or signal, the synchronous waiter drops that reference after calling tls_handshake_cancel(). handshake_req_cancel() returns false when handshake_complete() has already marked the request complete. In that case the completion callback can still be running, so dropping the callback-owned reference in the waiter can free the lower transport before xs_tls_handshake_done() stores xprt_err or drops its own reference. If cancellation loses to completion, wait until xs_tls_handshake_done() signals handshake_done and let the callback release its reference. This mirrors the server-side handshake lifetime handling and keeps the timeout or signal return value unchanged. | 19 Oct |
Download these 506 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.