Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2024-3596exploit | 9.0 critical | 15.0% | freeradius, broadcom, brocade_sannav, fabric_operating_system | RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature. | 15 Oct |
| CVE-2022-33186 | 9.8 critical | 2.0% | broadcom, fabric_operating_system | A vulnerability in Brocade Fabric OS software v9.1.1, v9.0.1e, v8.2.3c, v7.4.2j, and earlier versions could allow a remote unauthenticated attacker to execute on a Brocade Fabric OS switch commands capable of modifying zoning, disabling the switch, disabling ports, and modifying the switch IP address. | 13 Oct |
| CVE-2026-57216 | 10.0 critical | 1.0% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to 3.13.15, 4.0.20, 4.1.11, and 4.2.6, AMQP 0-9-1, AMQP 1.0, and Stream Protocol authentication can allow a loopback-restricted user such as guest to connect remotely when traffic is accepted through a trusted PROXY-protocol path and the backend listener is loopback-bound because the loopback check uses the listener-side socket address instead of the real client source. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. | Sun 25 Oct |
| CVE-2026-57211 | 10.0 critical | 1.0% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to 4.1.11 and 4.2.6 on Windows, the RabbitMQ management plugin static file handler rabbit_mgmt_wm_static can pass URL-encoded backslashes to erl_prim_loader:read_file_info before path validation when multiple management extension plugins are enabled, causing outbound DNS and SMB requests to attacker-controlled UNC paths. This issue is fixed in versions 4.1.11 and 4.2.6. | Sun 25 Oct |
| CVE-2026-47865 | 9.8 critical | 1.0% | broadcom, vmware_avi_load_balancer | VMware Avi Load Balancer contains an authentication bypass vulnerability. A malicious user with network access may be able to access the Avi Control plane by bypassing the authentication mechanism. Affected versions: 31.1.1 through 31.2.2 (fixed in 31.2.2-2p3) 30.1.1 through 30.2.6 (fixed in 30.2.7) 22.1.1 through 22.1.7 (fixed in 30.2.7) | 24 Oct |
| CVE-2026-64125 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. | 16 Oct |
| CVE-2026-22752 | 9.6 critical | 0.00% | broadcom, spring_authorization_server | Authentication bypass by primary weakness vulnerability in Spring Security Spring Authorization Server. This issue affects Spring Authorization Server: from 7.0.0 through 7.0.4, from 1.5.0 through 1.5.6, from 1.4.0 through 1.4.9, from 1.3.0 through 1.3.10. | 24 Oct |
| CVE-2026-67404 | 9.2 critical | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
| CVE-2026-67231 | 9.1 critical | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
9 of 9
Download these 9 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.