Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-14535 | 9.8 critical | 1.0% | trailofbits, fickling | In Trail of Bits fickling versions up to and including 0.1.11, the UnsafeImportsML analysis pass unconditionally calls AnalysisContext.shorten_code(node) on every import node it inspects, regardless of whether the import is flagged as unsafe. This call registers the shortened code representation in the shared AnalysisContext.reported_shortened_code set. When the MLAllowlist analysis pass subsequently runs, it calls the same shorten_code() method, receives already_reported=True for every import, and executes a continue statement that skips its allowlist check entirely. This renders MLAllowlist dead code for all imports — it never evaluates whether an import is in the ML allowlist or not. The MLAllowlist pass was designed to catch imports of modules outside the known-safe ML ecosystem (torch, numpy, transformers, etc.) that slip past the UnsafeImports denylist. With MLAllowlist inoperative, any standard library module not in the UNSAFE_IMPORTS denylist can be invoked via pickle deserialization while fickling's check_safety() returns LIKELY_SAFE. The fickling.load() API chains check_safety() into pickle.loads() as an explicit security gate, meaning a LIKELY_SAFE verdict causes the payload to be deserialized and executed. The root cause is shared mutable state between independently-correct analysis passes — UnsafeImportsML works as designed in isolation, MLAllowlist works as designed in isolation, but the shared reported_shortened_code set causes UnsafeImportsML to poison MLAllowlist's deduplication logic. | 25 Oct |
| CVE-2026-64113 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. | 19 Oct |
| CVE-2026-68300 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: auth: verify auth requirement when auth_chunk is NULL sctp_auth_chunk_verify() returns true unconditionally when chunk->auth_chunk is NULL, silently skipping authentication. This is incorrect when: 1. skb_clone() failed in the BH receive path, leaving auth_chunk NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new connections, so the early sctp_auth_recv_cid() check cannot catch this. 2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never called and auth_chunk remains NULL. Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL: if authentication is required, return false to drop the chunk; otherwise continue normally. | 19 Oct |
| CVE-2026-68144 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one. | 19 Oct |
| CVE-2025-68775 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: duplicate handshake cancellations leak socket When a handshake request is cancelled it is removed from the handshake_net->hn_requests list, but it is still present in the handshake_rhashtbl until it is destroyed. If a second cancellation request arrives for the same handshake request, then remove_pending() will return false... and assuming HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue processing through the out_true label, where we put another reference on the sock and a refcount underflow occurs. This can happen for example if a handshake times out - particularly if the SUNRPC client sends the AUTH_TLS probe to the server but doesn't follow it up with the ClientHello due to a problem with tlshd. When the timeout is hit on the server, the server will send a FIN, which triggers a cancellation request via xs_reset_transport(). When the timeout is hit on the client, another cancellation request happens via xs_tls_handshake_sync(). Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel path so duplicate cancels can be detected. | 19 Oct |
| CVE-2026-89712 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with list_for_each_entry_safe(ni, tmp, ...). For each expired entry it sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the source vfsmount, then reacquires the lock to list_del + kfree the entry and continue iterating via the macro's saved tmp pointer. The nsui_busy flag protects the current ni from concurrent nfsd4_ssc_setup_dul() finders during the lock-drop window, but it does not pin tmp. Another nfsd RPC thread that fails its source- server mount and reaches nfsd4_ssc_cancel_dul() will, during that same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount item, and release the lock. If that item is the saved tmp of the expire walk, the next iteration dereferences a freed nfsd4_ssc_umount_item. Restart the walk from the head after the mntput() unlock window so no saved next pointer survives the lock-drop. The list is bounded by the number of active inter-server source mounts (typically small) and the expire delayed-work runs periodically rather than per-IO, so the restart is cheap. | 19 Oct |
| CVE-2026-89635 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: only rebind the reopened file's own oplock on durable reconnect ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every detached oplock to the reconnecting session: list_for_each_entry_rcu(op, &ci->m_op_list, op_entry, lockdep_is_held(&ci->m_lock)) { if (op->conn) continue; op->conn = ksmbd_conn_get(fp->conn); op->sess = work->sess; } The only key is op->conn == NULL, which every detached durable handle on that inode matches, not just the one owned by fp. When two sessions hold durable handles on the same file and both disconnect, reconnecting one of them adopts the other session's oplock: op->sess is overwritten with the reconnecting session without taking a reference on it, while op->conn pins the connection. The sibling teardown path, session_fd_check(), keys on the identity of the connection being torn down (op->conn == conn) rather than on shared state, and so does not have this problem. Once the adopting session is destroyed, ksmbd_session_destroy() frees it while the foreign oplock still points at it. The reader in ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is still live thanks to the reference taken above, and then dereferences the stale session: if (!opinfo->conn) { up_read(&fp->f_ci->m_lock); goto out; } ft = &opinfo->sess->file_table; write_lock(&ft->lock); BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0 Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: _raw_write_lock+0x74/0xd0 ksmbd_close_fd_app_instance_id+0x183/0x410 smb2_open+0x1346/0x4430 handle_ksmbd_work+0x2bb/0x7b0 Reached from an authenticated session against a share with the default durable-handle and oplock configuration: two sessions open the same file with a durable-v2 handle and an RH lease under distinct AppInstanceIds, both log off, one reconnects with DH2C, and a later durable-v2 create carrying the other AppInstanceId walks into the freed session. Constrain the loop to the oplock owned by the file being reopened. | 19 Oct |
| CVE-2026-89533 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a Read chunk's segment list to build a sub-range starting at byte offset and spanning length bytes for a Position-Zero or Call chunk. Two arithmetic defects in the per-segment loop produce wrong DMA lengths and a u32 underflow: pcl_for_each_segment(segment, chunk) { if (offset > segment->rs_length) { offset -= segment->rs_length; continue; } dummy.rs_handle = segment->rs_handle; dummy.rs_length = min_t(u32, length, segment->rs_length) - offset; dummy.rs_offset = segment->rs_offset + offset; First, the skip predicate uses '>' instead of '>='. When offset equals the segment's full rs_length, the segment is fully consumed and should be skipped, but the loop falls through into the body. The resulting dummy.rs_length is min_t(u32, length, rs_length) - rs_length, which underflows to a near-UINT_MAX u32 when length is smaller than rs_length, or is zero otherwise. Second, the length formula subtracts offset from the min_t() result rather than from segment->rs_length before the cap. For offset > 0 the segment's residual is rs_length - offset, not rs_length, so the cap must be applied to the residual. With the current bracketing, whenever length is smaller than rs_length - offset the per-segment length becomes length - offset instead of length, silently dropping offset bytes from the rebuilt chunk. Combined with the boundary case above it also enables the u32 underflow path, which propagates a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB kmalloc_array_node() in svc_rdma_get_rw_ctxt(). Additionally, svc_rdma_read_call_chunk() can invoke this function with length == 0 when the last Read chunk ends exactly at the end of the Call chunk. With the corrected >= predicate, every segment is skipped and the function returns the initial -EINVAL, rejecting a valid request. Return success immediately when length is zero. Also break out of the loop once length is fully consumed to avoid passing zero-length segments to svc_rdma_build_read_segment(). Fix by using '>=' so a fully-consumed segment is skipped, by moving '- offset' inside min_t() so the cap is applied to the segment's residual length, by returning success for zero-length requests, and by stopping iteration when the requested range has been consumed. | 19 Oct |
| CVE-2026-74588 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: keep chunk->transport in step with the list it is queued on __sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's transmitted list without updating chunk->transport: if (chunk->tsn_gap_acked) { list_move_tail(&chunk->transmitted_list, &transport->transmitted); continue; } The chunk then sits on a live transport's list while chunk->transport still names a different one. If that transport is removed - sctp_assoc_rm_peer() from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk is left with a dangling pointer. sctp_assoc_rm_peer() scrubs peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on neither. The pointer is not followed while tsn_gap_acked is set. A SACK that reneges on the TSN clears the flag, and the next SACK reaches tchunk->transport->flight_size -= sctp_data_size(tchunk); inside the freed transport. KASAN reports a slab-use-after-free read in sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the removal and the SACKs come from the association peer. Set chunk->transport at the move. The ordinary resend path needs nothing: it reaches its list_move_tail() only after sctp_packet_append_chunk() returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the chunk by then. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 16 Oct |
| CVE-2026-74480 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | 16 Oct |
| CVE-2026-77459 | 9.9 critical | 0.00% | no CPE yet | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. From 2.10.0 until 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2, Argo CD creates PostDelete resource hooks without applying the AppProject destination and resource authorization checks used during ordinary synchronization. The omitted checks include cluster-scoped and namespaced resource allow/deny lists. A user who can write to an Application's Git repository can commit a delete hook targeting a forbidden namespace, server, group, kind, or resource name, and deletion of the Application causes the application-controller to create that resource with its destination-cluster credentials. The reachable impact is bounded by the controller's cluster access but can include cluster-scoped resources, disallowed namespaces, persistent hook objects, and secondary objects created by a hook Job. PreSync, Sync, PostSync, and SyncFail hooks continue to use the normal project checks. This issue is fixed in versions 3.3.15, 3.4.10, 3.5.4, and 3.6.0-rc2. | 16 Oct |
| CVE-2026-54133 | 9.8 critical | 0.00% | jmespath | jmespath.php allows users to use JMESPath, software for declaratively specifying how to extract elements from a JSON document, in PHP applications with PHP data structures. Versions prior to 2.9.1 can generate and execute attacker-controlled PHP code when `JmesPath\CompilerRuntime` is used with an attacker-controlled JMESPath expression. The compiler emits parsed JMESPath function names into generated PHP source without sufficient escaping. A crafted expression can cause the generated cache file to contain executable attacker-controlled PHP, which is then loaded by the compiler runtime. The issue is patched in `2.9.1` and later. As a workaround, disable `JP_PHP_COMPILE` and do not use `JmesPath\CompilerRuntime` with attacker-controlled expressions. Use the default `AstRuntime` for untrusted expressions. Applications that must continue accepting untrusted JMESPath expressions before upgrading should ensure those expressions are never evaluated by the compiler runtime. | Sun 25 Oct |
| CVE-2025-59841 | 9.8 critical | 0.00% | flagforge | Flag Forge is a Capture The Flag (CTF) platform. In versions from 2.2.0 to before 2.3.1, the FlagForge web application improperly handles session invalidation. Authenticated users can continue to access protected endpoints, such as /api/profile, even after logging out. CSRF tokens are also still valid post-logout, which can allow unauthorized actions. This issue has been patched in version 2.3.1. | 11 Oct |
| CVE-2026-53662 | 9.6 critical | 0.00% | no CPE yet | immich is a high performance self-hosted photo and video management solution. From commit 4ffa26c9 until 4eb1003, a reflected cross-site scripting (XSS) vulnerability on the /auth/login page allows an attacker to fully compromise any authenticated user's account with a single link click. The continue query parameter is read from the URL and passed to SvelteKit's redirect() without any scheme or origin validation, allowing attacker-controlled JavaScript to execute inside Immich's origin. The payload then uses the victim's existing session to mint an all-permission API key on their account, leading to persistent account takeover. This vulnerability is fixed in commit 4eb1003. | Sun 25 Oct |
| CVE-2026-113788 | 9.4 critical | 0.00% | no CPE yet | Lagoon is an application delivery platform for Kubernetes. Versions prior to 2.33.1 have a vulnerability in the `ssh` service in Lagoon core that would allow an attacker to execute arbitrary code which could lead to, among other things, elevated administrative permissions. It is mitigated by the fact that an attacker must have a Lagoon user account. Exploitation may be detected by checking the container logs of the `ssh` service for: `too many arguments`. The vulnerability was fixed in Lagoon v2.33.2, which is included in the `lagoon/lagoon-core` helm chart v1.62.2. As a workaround, the `ssh` service in Lagoon core can be disabled. The `ssh-portal` service and components are not effected and can continue to be used. | 23 Oct |
| CVE-2026-43114 | 9.4 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | 19 Oct |
| CVE-2026-39462 | 9.3 critical | 0.00% | senselive, x3500_firmware | A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly. | Mon 26 Oct |
| CVE-2026-4320 | 9.3 critical | 0.00% | no CPE yet | Authorization Bypass vulnerability in Creartia's ICMS software could allow an attacker to gain unauthorized access to protected features by manipulating the HTTP redirect headers of the login process, causing the script to continue running and enabling privilege escalation without the need for credentials. | Mon 26 Oct |
| CVE-2025-31699 | 9.1 critical | 0.00% | no CPE yet | Apache Traffic Server can return an origin connection to the shared pool while the origin is still waiting on a request body the client declared but never fully sent, including when the client used Expect: 100-continue. The origin then reads a later request on that connection as leftover body data, which lets an attacker smuggle requests past ATS access controls, disrupt other users' requests, or poison the cache. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. | Wed 28 Oct |
| CVE-2026-64829 | 9.1 critical | 0.00% | no CPE yet | Question2Answer through 1.8.8 contains a session invalidation vulnerability that allows attackers with a previously obtained remember-me cookie to retain authenticated access by exploiting the forgot-password reset flow's failure to clear the sessioncode field in qa-include/app/users-edit.php. While the normal password-change flow in qa-include/pages/account.php explicitly clears the sessioncode to invalidate persistent qa_session cookies, the forgot-password handler qa_finish_reset_user() omits this step, allowing any valid persistent cookie issued before the reset to continue authenticating the account after the password reset completes. | 24 Oct |
| CVE-2026-78357 | 9.1 critical | 0.00% | no CPE yet | Previously issued authentication tokens are not immediately invalidated when an OTRS agent or customer user account is deactivated or its password is changed. As a result, an existing JWT may remain valid until its regular expiration time, which can be approximately 16 hours. An attacker who has previously obtained a valid authentication token can therefore continue to access OTRS with the privileges of the affected agent or customer user even after the corresponding account has been deactivated or the user's password has been changed. The vulnerability does not allow an attacker to obtain authentication tokens by itself. Exploitation requires possession of a previously issued and still valid token. The actual impact depends on the privileges associated with the compromised token. Customer user tokens are limited to the permissions of the affected customer account, while agent tokens may provide access to broader ticket, customer, or administrative functionality depending on the assigned permissions. This issue affects OTRS: * 7.0.X * 8.0.X * 2023.X * 2024.X * 2025.X * 2026.X before 2026.7.X | 15 Oct |
21 of 21
Download these 21 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.