Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-72014 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required. | 19 Oct |
| CVE-2025-34198 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.951 and Application prior to 20.0.2368 (VA and SaaS deployments) contain shared, hardcoded SSH host private keys in the appliance image. The same private host keys (RSA, ECDSA, and ED25519) are present across installations, rather than being uniquely generated per appliance. An attacker who obtains these private keys (for example from one compromised appliance image or another installation) can impersonate the appliance, decrypt or intercept SSH connections to appliances that use the same keys, and perform man-in-the-middle or impersonation attacks against administrative SSH sessions. This vulnerability has been identified by the vendor as: V-2024-011 — Hardcoded SSH Host Key. | 18 Oct |
| CVE-2025-34199 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.1049 and Application versions prior to 20.0.2786 (VA and SaaS deployments) contain insecure defaults and code patterns that disable TLS/SSL certificate verification for communications to printers and internal microservices. In multiple places, the application sets libcurl/PHP transport options such that CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER are effectively disabled, and environment variables (for example API_*_VERIFYSSL=false) are used to turn off verification for gateway and microservice endpoints. As a result, the client accepts TLS connections without validating server certificates (and, in some cases, uses clear-text HTTP), permitting on-path attackers to perform man-in-the-middle (MitM) attacks. An attacker able to intercept network traffic between the product and printers or microservices can eavesdrop on and modify sensitive data (including print jobs, configuration, and authentication tokens), inject malicious payloads, or disrupt service. This vulnerability has been identified by the vendor as: V-2024-024 — Insecure Communication to Printers & Microservices. | 18 Oct |
| CVE-2026-103594 | 9.5 critical | 0.00% | no CPE yet | A stack-based buffer overflow vulnerability in Fireware OS's WireGuard configuration processing allows a remote attacker that has man-in-the-middle TLS-decrypted access between the Firebox and WatchGuard Cloud to create a Denial of Service condition and potentially execute arbitrary code by tampering with a FireCloud Gateway configuration payload. | Wed 28 Oct |
| CVE-2026-13385 | 9.5 critical | 0.00% | no CPE yet | An Improper Validation of Integrity Check Value and Improper Certificate Validation in certain ASUS router models allows a remote man-in-the-middle(MITM) user to make the router download and execute arbitrary command via a spoofed server. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. | 24 Oct |
| CVE-2026-93291 | 9.3 critical | 0.00% | eufy, omni c20 | Omni C20 lacks proper certificate validation which could allow an attacker to perform a man-in-the-middle attack which could allow them to execute arbitrary code. | Fri 30 Oct |
| CVE-2026-32105 | 9.3 critical | 0.00% | neutrinolabs, xrdp | xrdp is an open source RDP server. In versions through 0.10.5, xrdp does not implement verification for the Message Authentication Code (MAC) signature of encrypted RDP packets when using the "Classic RDP Security" layer. While the sender correctly generates signatures, the receiving logic lacks the necessary implementation to validate the 8-byte integrity signature, causing it to be silently ignored. An unauthenticated attacker with man-in-the-middle (MITM) capabilities can exploit this missing check to modify encrypted traffic in transit without detection. It does not affect connections where the TLS security layer is enforced. This issue has been fixed in version 0.10.6. If users are unable to immediately upgrade, they should configure xrdp.ini to enforce TLS security (security_layer=tls) to ensure end-to-end integrity. | Mon 26 Oct |
| CVE-2026-114220 | 9.3 critical | 0.00% | no CPE yet | NT OneAPP developed by NewType Infortech has an Improper Certificate Validation vulnerability. Unauthenticated network-adjacent attackers can perform a man-in-the-middle attack by failing to validate the server certificate and the hostname, thereby intercepting or modifying communications between the application and the server. | 22 Oct |
| CVE-2025-34196 | 9.3 critical | 0.00% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application prior to 25.1.1413 (Windows client deployments) contain a hardcoded private key for the PrinterLogic Certificate Authority (CA) and a hardcoded password in product configuration files. The Windows client ships the CA certificate and its associated private key (and other sensitive settings such as a configured password) directly in shipped configuration files (for example clientsettings.dat and defaults.ini). An attacker who obtains these files can impersonate the CA, sign arbitrary certificates trusted by the Windows client, intercept or decrypt TLS-protected communications, and otherwise perform man-in-the-middle or impersonation attacks against the product's network communications. This vulnerability has been identified by the vendor as: V-2022-001 — Configuration File Contains CA & Private Key. | 18 Oct |
| CVE-2025-34211 | 9.3 critical | 0.00% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA and SaaS deployments) contain a private SSL key and matching public certificate stored in cleartext. The key belongs to the hostname `pl‑local.com` and is used by the appliance to terminate TLS connections on ports 80/443. Because the key is hardcoded, any attacker who can gain container-level access can simply read the files and obtain the private key. With the private key, the attacker can decrypt TLS traffic, perform man-in-the-middle attacks, or forge TLS certificates. This enables impersonation of the appliance’s web UI, interception of credentials, and unrestricted access to any services that trust the certificate. The same key is identical across all deployed appliances meaning a single theft compromises the confidentiality of every Vasion Print installation. This vulnerability has been identified by the vendor as: V-2024-025 — Hardcoded SSL Certificate & Private Keys. | 18 Oct |
| CVE-2026-104076 | 9.3 critical | 0.00% | no CPE yet | TVU Networks Receiver/Transceiver devices running firmware before version 7.9 contain a missing authentication vulnerability that allows remote unauthenticated attackers to read sensitive device information and modify device configuration via unprotected REST API endpoints. Attackers can send unauthenticated GET requests to disclose network configuration, firmware details, and cloud service information, or issue POST requests to endpoints such as /Setting3/API/API/v1/LocalNetwork/DNS to alter DNS settings and enable man-in-the-middle attacks on outbound connections to TVU cloud infrastructure. | 9 Oct |
| CVE-2026-102469 | 9.2 critical | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist. This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server. Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible. The impacted component is io.vertx:vertx-db2-client. | 20 Oct |
| CVE-2026-67404 | 9.2 critical | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
| CVE-2026-108014 | 9.1 critical | 0.00% | no CPE yet | Private keys for eight eMudhra intermediate CA certificates have been compromised https://emudhra.we-have-a-problem.com/ , which impacts certificate trust for outbound network request features of HCL Domino Server. An unauthenticated network attacker could spoof server certificates to execute a man in the middle (MITM) attack, enabling them to intercept and/or modify the content of outbound TLS connections. | Wed 28 Oct |
| CVE-2026-108015 | 9.1 critical | 0.00% | no CPE yet | Private keys for eight eMudhra intermediate CA certificates have been compromised https://emudhra.we-have-a-problem.com/ , which impacts certificate trust for outbound network request features of HCL Notes Client. An unauthenticated network attacker could spoof server certificates to execute a man in the middle (MITM) attack, enabling them to intercept and/or modify the content of outbound TLS connections. | Wed 28 Oct |
| CVE-2026-105216 | 9.1 critical | 0.00% | micro, go-micro | go-micro before 6.0.0 contains an improper certificate validation vulnerability that allows network attackers to impersonate services because the shared TLS helper sets InsecureSkipVerify to true by default. Man-in-the-middle attackers can present any certificate to intercept or modify gRPC transport, HTTP and RabbitMQ broker, and Consul or etcd registry traffic, including authentication tokens and credentials. | Tue 27 Oct |
| CVE-2026-41872 | 9.1 critical | 0.00% | no CPE yet | "Kura Sushi Official App" provided by EPG, Inc. is vulnerable to improper certificate validation. A man-in-the-middle attack may allow eavesdropping on, or altering, the communication on push notifications between the affected application and the relevant server. | Mon 26 Oct |
| CVE-2026-11751 | 9.1 critical | 0.00% | no CPE yet | A vulnerability has been identified in armeria-xds versions prior to 1.41.0, where xDS upstream TLS peer verification may be silently disabled, allowing man-in-the-middle attacks against xDS-managed upstream connections. | 22 Oct |
| CVE-2026-35560 | 9.1 critical | 0.00% | amazon, athena_odbc | Improper certificate validation in the identity provider connection components in Amazon Athena ODBC driver before 2.1.0.0 might allow a man-in-the-middle threat actor to intercept authentication credentials due to insufficient default transport security when connecting to identity providers. This only applies to connections with external identity providers and does not apply to connections with Athena. To remediate this issue, users should upgrade to version 2.1.0.0. | 20 Oct |
| CVE-2026-46266 | 9.1 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP Yizhou Zhao reported that simply having one RAW socket on protocol IPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255); A malicious incoming ICMP packet can set the protocol field to 255 and match this socket, leading to FNHE cache changes. inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST") pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner "man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets. Make sure we drop these malicious packets. | 19 Oct |
| CVE-2026-109423 | 9.1 critical | 0.00% | no CPE yet | NetEase Cloud Music client for Windows (cloudmusic.exe) versions 3.1.38 and 3.1.39.205426 contains a TLS certificate validation vulnerability that allows a network-adjacent attacker to intercept and decrypt HTTPS traffic by failing to validate the server certificate chain, verify the hostname, or consult any Windows certificate trust store. Attackers can perform a man-in-the-middle attack using a rogue certificate authority to decrypt traffic, capture the MUSIC_U session credential sent in authenticated API requests, and modify server responses in transit, enabling account takeover and transport-layer response forgery. | 16 Oct |
| CVE-2026-77638 | 9.0 critical | 0.00% | torproject, tor | Tor before 0.4.9.11 is prone to a race condition where in just the right circumstances a rendezvous point could man-in-the-middle (impersonate) the onion service that the client was trying to reach. | 18 Oct |
| CVE-2026-91881 | 9.0 critical | 0.00% | no CPE yet | Dell Terraform Provider for Redfish, versions prior to 1.6.2, contains an Improper Certificate Validation vulnerability in the HTTP transport component. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information exposure and unauthorized access. This is a Critical severity vulnerability as it allows an unauthenticated attacker to intercept all Redfish BMC traffic including credentials by performing a man-in-the-middle attack, since TLS certificate verification is unconditionally disabled in the base HTTP transport. Dell recommends customers to upgrade at the earliest opportunity. | 15 Oct |
| CVE-2026-16516 | 9.0 critical | 0.00% | wolfssh | wolfSSH does not validate that the ECDSA curve identifier in a KEXDH_REPLY host key blob matches the algorithm negotiated during key exchange. In ParseECCPubKey() (src/internal.c), the blob's algorithm string is used to derive the curve via NameToId/wcPrimeForId without checking against the negotiated ssh->handshake->pubKeyId, and the RFC 5656 curve identifier string is discarded via GetSkip() rather than compared. An active network man-in-the-middle attacker can substitute a host key blob containing a different ECDSA curve, causing the client to import the key on the wrong curve. Because the attacker controls the private key for the substituted curve, signature verification passes. Exploitation requires an active MitM position and a lax public key check callback (e.g., TOFU, algorithm-name-only check, or fingerprint match against the parsed key). | 13 Oct |
24 of 24
Download these 24 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.