Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-59144 | 9.8 critical | 1.0% | no CPE yet | Data::RingBuffer::Shared versions before 0.04 for Perl allow a stack buffer overflow via an unvalidated elem_size in ring_read_seq. The attach-time validator ring_validate_header checks the capacity-overflow and total_size consistency of the header but never caps elem_size against the destination size. ring_read_seq does memcpy(out, ring_slot(h, seq), elem_size) with elem_size read raw from the mmap'd segment, copying into a fixed 8-byte destination scalar. An elem_size larger than 8 bytes writes past the destination. A local peer that can write the backing file can leave the header valid while setting a large elem_size, so the next read copies a file-controlled length into the fixed 8-byte stack buffer, corrupting adjacent stack frames. | 24 Oct |
| CVE-2026-89702 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: size fh_verify server sockaddr slot by xpt_locallen The nfsd_fh_verify and nfsd_fh_verify_err tracepoints declare the server sockaddr slot sized by xpt_remotelen but fill it from xpt_local using xpt_locallen: TP_STRUCT__entry( ... __sockaddr(server, rqstp->rq_xprt->xpt_remotelen) ... ) TP_fast_assign( ... __assign_sockaddr(server, &rqstp->rq_xprt->xpt_local, rqstp->rq_xprt->xpt_locallen); ... ) When xpt_locallen exceeds xpt_remotelen, __assign_sockaddr's memcpy writes past the reserved ring-buffer slot. In the reverse direction (xpt_locallen < xpt_remotelen) the slot is oversized and the unwritten tail leaks prior ring-buffer contents to trace consumers. The write-past-end case is reachable on NFS/UDP. svc_xprt_set_remote() is only called from svc_tcp_accept() (net/sunrpc/svcsock.c) and from the RDMA connect path; svc_create_socket() for UDP calls only svc_xprt_set_local(), so xpt_remotelen stays 0 for the xprt's lifetime. Every fh_verify trace for an NFSv2/v3-over-UDP request then copies 16 or 28 bytes from xpt_local into a zero-byte slot. The other NFSD tracepoints that record the server address (NFSD_TRACE_PROC_CALL_FIELDS, NFSD_TRACE_PROC_RES_FIELDS, SVC_RQST_ENDPOINT_FIELDS) already size the server slot by xpt_locallen; nfsd_fh_verify and nfsd_fh_verify_err were the only exceptions. Fix by sizing the server slot with xpt_locallen so the declared slot matches the copy length. The client slot and its assignment already agree on xpt_remotelen and are left untouched. | 21 Oct |
| CVE-2026-64047 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | 19 Oct |
| CVE-2026-53215 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. | 19 Oct |
| CVE-2026-89857 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held: - qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and - qla2xxx_process_purls_pkt(), run from the purex work/DPC context. Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can run concurrently with normal I/O submission on the base ring and corrupt the ring producer state, leading to duplicated or dropped commands. The third caller, qla2xxx_process_purls_iocb(), runs inside qla24xx_process_response_queue() with the qpair lock already held and is safe; that is also why the lock cannot be taken inside the helper itself (it would recursively re-acquire hardware_lock on the response path). Take qp_lock_ptr around the two unlocked callers and document the helper as caller-locked. Both run in process context, so spin_lock_irqsave() is used and nothing in the locked region sleeps. | 19 Oct |
| CVE-2026-72473 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decouple req recycling from RPC completion rl_kref formerly served two distinct lifetimes through a single refcount: it gated when a Reply could wake its RPC task, and it gated when an rpcrdma_req could return to its free pool. The marshal path took the Send-side reference only when SGEs needed DMA-unmap (sc_unmap_count > 0), which made a Send carrying only pre-registered buffers an exception: the Reply handler dropped rl_kref from 1 to 0 and freed the req while the HCA might still be DMA-reading from its send buffer. Give rl_kref a narrower job. The RPC layer takes one reference when slot allocation hands a req out. rpcrdma_prepare_send_sges() takes a Send-side reference unconditionally after WR preparation succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop the RPC-layer reference; rpcrdma_sendctx_unmap() drops the Send-side reference. The req returns to its free pool only after both owners have signed off. The existing kref_init(&req->rl_kref) call in rpcrdma_prepare_send_sges() is removed. Initialization moves to the slot-allocation paths (xprt_rdma_alloc_slot and rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref before the req returns to a free pool. A re-init in the marshal path would discard the RPC-layer reference that already exists on entry. Three invariants follow: - Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1. xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the backlog-wake branch in xprt_rdma_alloc_slot() each kref_init rl_kref before publishing the req. Without this invariant, an RPC task that aborts between slot allocation and marshal (gss_refresh failure or signal during call_connect, for example) would drive xprt_release() -> xprt_rdma_free_slot() -> kref_put against a refcount of zero, saturating refcount_t and stranding the slot. - The Send-side reference is taken only after WR prep succeeds. A mapping failure in rpcrdma_prepare_send_sges() runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx and clears sc_req without touching rl_kref. The sendctx ring walks in rpcrdma_sendctx_put_locked() and rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL, so a burst of -EIO marshal failures cannot hold reqs off rb_send_bufs. - The release callback re-arms rl_kref so the next consumer enters with the invariant satisfied. Replies now complete the RPC directly. rpcrdma_reply_handler() calls rpcrdma_complete_rqst() in place of kref_put on the non-LocalInv branch. The LocalInv branch already completes the RPC from frwr_unmap_async() and is unaffected. Because Send-side references can now outlive RPC completion, connection teardown drains sendctx entries whose unsignaled Sends never had a later signaled completion to walk the ring. rpcrdma_sendctxs_destroy() walks the active range and runs rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req before the request buffers are reset, and is moved ahead of rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs are still in their pre-reset state when the Send-side refs are released. The drain creates a teardown-ordering hazard on the backchannel path. With the new lifetime, releasing a bc_prealloc req from rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has already emptied bc_pa_list, so the drained reqs would otherwise leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0) a second time after the disconnect to reclaim them. | 16 Oct |
| CVE-2026-72339 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | 16 Oct |
| CVE-2026-89846 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a huge value and advances sense_data out of bounds. The underflowed par_sense_len then defeats the cap in qla2x00_handle_sense(): if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the out-of-bounds sense_data pointer, leaking adjacent response-ring/heap memory into the command's sense buffer. Clamp rsp_info_len to par_sense_len before the subtraction so par_sense_len can never underflow and sense_data stays within the IOCB data area. The fix sits before the comp_status switch, covering both qla2x00_handle_sense() call sites. | 19 Oct |
| CVE-2025-38429 | 10.0 critical | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability. | Fri 30 Oct |
| CVE-2026-99079 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on refill retry When an XDP redirect to an AF_XDP socket fails because its RX ring is full, the XSK core frees the buffer. During the subsequent batched refill of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before allocating a replacement. If that refill succeeds only partially, a WQE left without a replacement retains its old buffer pointer. The buffer can meanwhile be allocated to another WQE. A later refill retry can then free the live buffer through the stale pointer and publish the same UMEM frame twice. Mark the WQE as released immediately after the driver-side free. The flag is already cleared when a replacement buffer is assigned, so refill retries no longer release stale pointers. The failure is silent and produces no kernel warning or splat. A standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914 packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64 ownership/double-publication errors. With this change it processed 356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events, with no ownership or data errors. | 24 Oct |
| CVE-2026-64037 | 9.8 critical | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism. | 19 Oct |
| CVE-2025-68301 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: atlantic: fix fragment overflow handling in RX path The atlantic driver can receive packets with more than MAX_SKB_FRAGS (17) fragments when handling large multi-descriptor packets. This causes an out-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic. The issue occurs because the driver doesn't check the total number of fragments before calling skb_add_rx_frag(). When a packet requires more than MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds. Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for. And reusing the existing check to prevent the overflow earlier in the code path. This crash occurred in production with an Aquantia AQC113 10G NIC. Stack trace from production environment: ``` RIP: 0010:skb_add_rx_frag_netmem+0x29/0xd0 Code: 90 f3 0f 1e fa 0f 1f 44 00 00 48 89 f8 41 89 ca 48 89 d7 48 63 ce 8b 90 c0 00 00 00 48 c1 e1 04 48 01 ca 48 03 90 c8 00 00 00 <48> 89 7a 30 44 89 52 3c 44 89 42 38 40 f6 c7 01 75 74 48 89 fa 83 RSP: 0018:ffffa9bec02a8d50 EFLAGS: 00010287 RAX: ffff925b22e80a00 RBX: ffff925ad38d2700 RCX: fffffffe0a0c8000 RDX: ffff9258ea95bac0 RSI: ffff925ae0a0c800 RDI: 0000000000037a40 RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000021 R10: 0000000000000848 R11: 0000000000000000 R12: ffffa9bec02a8e24 R13: ffff925ad8615570 R14: 0000000000000000 R15: ffff925b22e80a00 FS: 0000000000000000(0000) GS:ffff925e47880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9258ea95baf0 CR3: 0000000166022004 CR4: 0000000000f72ef0 PKRU: 55555554 Call Trace: <IRQ> aq_ring_rx_clean+0x175/0xe60 [atlantic] ? aq_ring_rx_clean+0x14d/0xe60 [atlantic] ? aq_ring_tx_clean+0xdf/0x190 [atlantic] ? kmem_cache_free+0x348/0x450 ? aq_vec_poll+0x81/0x1d0 [atlantic] ? __napi_poll+0x28/0x1c0 ? net_rx_action+0x337/0x420 ``` Changes in v4: - Add Fixes: tag to satisfy patch validation requirements. Changes in v3: - Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for. | 14 Oct |
| CVE-2026-40317 | 9.3 critical | 0.00% | minecanton209, novumos | NovumOS is a custom 32-bit operating system written in Zig and x86 Assembly. In versions prior to 0.24, Syscall 12 (JumpToUser) accepts an arbitrary entry point address from user-space registers without validation, allowing any Ring 3 user-mode process to jump to kernel addresses and execute arbitrary code in Ring 0 context, resulting in local privilege escalation. This issue has been fixed in version 0.24. If developers are unable to immediately update, they should restrict syscall access by running the system in single-user mode without Ring 3, and disable user-mode processes by only running kernel shell with no user processes. This issue has been fixed in version 0.24. | Mon 26 Oct |
| CVE-2026-72329 | 9.3 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | 21 Oct |
| CVE-2026-72085 | 9.3 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free unsubmitted command instead of double-putting it scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0; the se_cmd is initialised (kref_init() via target_init_cmd()) only later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB path. The two error paths in scsiback_do_cmd_fn() taken before the command is submitted -- a failed scsiback_gnttab_data_map() and an unknown ring_req.act -- call transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a refcount of 0. That underflows it ("refcount_t: underflow; use-after-free") and, as the release function is not run, leaks the command tag. Impact: a pvSCSI guest can leak every command tag of a LUN's session, stopping the LUN, by submitting requests with a bad grant reference or an unknown request type; under panic_on_warn the refcount underflow panics the host. Add a helper that just returns the tag with target_free_tag() and sends the error response. It frees the tag while the v2p reference still pins the session, and snapshots the response fields beforehand because freeing the tag can let another ring reuse the pending_req slot. | 19 Oct |
| CVE-2026-40572 | 9.0 critical | 0.00% | minecanton209, novumos | NovumOS is a custom 32-bit operating system written in Zig and x86 Assembly. In versions prior to 0.24, Syscall 15 (MemoryMapRange) allows Ring 3 user-mode processes to map arbitrary virtual address ranges into their address space without validating against forbidden regions, including critical kernel structures such as the IDT, GDT, TSS, and page tables. A local attacker can exploit this to modify kernel interrupt handlers, resulting in privilege escalation from user mode to kernel context. This issue has been fixed in version 0.24. | Mon 26 Oct |
16 of 16
Download these 16 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.