Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-98490 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | Sat 24 Oct |
| CVE-2026-64439 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: krb5 - filter out async aead implementations at alloc krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL completion callback and treat any negative return from crypto_aead_{encrypt,decrypt}() as terminal, falling through to kfree_sensitive(buffer). When the encrypt_name resolves to an async AEAD instance the request returns -EINPROGRESS, the buffer is freed while the backend's worker still holds a pointer, and the worker dereferences the freed slab on completion. KASAN report under UML+SLUB with a synthetic async aead backend bound to krb5->encrypt_name: BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7 The helpers were written synchronously, so filter the async instances out at allocation time instead of plumbing crypto_wait_req() through every call site. Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and net/ceph/crypto.c on systems with an async AEAD provider bound to the krb5 enctype name. | Sat 24 Oct |
| CVE-2026-71289 | 9.8 critical | 1.0% | no CPE yet | The NASA-AMMOS Asynchronous Network Management System (ANMS) reference implementation's default docker-compose.yml publishes the amp-manager service's REST API directly to the host network interface (port 8089, e.g. ":8089/tcp") with cap_add: NET_ADMIN, NET_RAW, SYS_NICE, bypassing the CAM (Configuration and Access Manager) gateway that is otherwise the system's sole authentication boundary. | Fri 23 Oct |
| CVE-2026-43465 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | 21 Oct |
| CVE-2026-80980 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: stop killed, freed and out_of_sync sharing a byte The three connection state flags are single-bit bitfields, so they occupy one byte of struct smc_connection and every store to one is a read-modify-write of the other two: u8 killed : 1; u8 freed : 1; u8 out_of_sync : 1; They are not written under a common lock. smc_cdc_msg_validate() sets out_of_sync from the receive tasklet, while smc_conn_kill() sets killed from process context under lock_sock(), and the receive path does not defer to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only bh_lock_sock(). Give each flag its own byte so a store no longer touches its neighbours. All readers test them as booleans and are unchanged. struct smc_connection grows by two bytes. | 21 Oct |
| CVE-2026-74269 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | 21 Oct |
| CVE-2026-63979 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | 21 Oct |
| CVE-2026-63857 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed. | 21 Oct |
| CVE-2026-72065 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Validate the packet length reported by the NIC Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. | 19 Oct |
| CVE-2026-72064 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Sync page pool RX frags for CPU MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack. | 19 Oct |
| CVE-2026-64047 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | 19 Oct |
| CVE-2026-64046 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | 19 Oct |
| CVE-2026-63993 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. | 19 Oct |
| CVE-2026-68161 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | 19 Oct |
| CVE-2026-68159 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | 19 Oct |
| CVE-2026-68127 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | 19 Oct |
| CVE-2026-68117 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | 19 Oct |
| CVE-2026-64541 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket smc_cdc_rx_handler() looks up the connection by token under the link group's conns_lock, drops the lock, and then dereferences conn and the smc_sock derived from it, ending in sock_hold(&smc->sk) inside smc_cdc_msg_recv(). No reference is held across the lock release. The only reference pinning the socket while the connection is discoverable in the link group is taken in smc_lgr_register_conn() (sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both under conns_lock. Once the handler drops conns_lock, a concurrent close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn() can drop that reference and free the smc_sock, so the handler's later sock_hold() runs on freed memory: WARNING: lib/refcount.c:25 at refcount_warn_saturate Workqueue: rxe_wq do_work refcount_warn_saturate (lib/refcount.c:25) smc_cdc_msg_recv (net/smc/smc_cdc.c:430) smc_cdc_rx_handler (net/smc/smc_cdc.c:502) smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445) tasklet_action_common (kernel/softirq.c:938) handle_softirqs (kernel/softirq.c:622) Kernel panic - not syncing: panic_on_warn set Only SMC-R is affected. The SMC-D receive tasklet is stopped by tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection is unregistered, so it cannot run concurrently with the free. Take the socket reference while still holding conns_lock, so the registration reference can no longer be the last one, and drop it once the handler is done. | 19 Oct |
| CVE-2026-64530 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. | 19 Oct |
| CVE-2026-53215 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. | 19 Oct |
| CVE-2026-52982 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix. | 19 Oct |
| CVE-2026-43341 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. | 19 Oct |
| CVE-2026-43011 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); } | 19 Oct |
| CVE-2025-68775 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: duplicate handshake cancellations leak socket When a handshake request is cancelled it is removed from the handshake_net->hn_requests list, but it is still present in the handshake_rhashtbl until it is destroyed. If a second cancellation request arrives for the same handshake request, then remove_pending() will return false... and assuming HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue processing through the out_true label, where we put another reference on the sock and a refcount underflow occurs. This can happen for example if a handshake times out - particularly if the SUNRPC client sends the AUTH_TLS probe to the server but doesn't follow it up with the ClientHello due to a problem with tlshd. When the timeout is hit on the server, the server will send a FIN, which triggers a cancellation request via xs_reset_transport(). When the timeout is hit on the client, another cancellation request happens via xs_tls_handshake_sync(). Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel path so duplicate cancels can be detected. | 19 Oct |
| CVE-2025-40252 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end() The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate over 'cqe->len_list[]' using only a zero-length terminator as the stopping condition. If the terminator was missing or malformed, the loop could run past the end of the fixed-size array. Add an explicit bound check using ARRAY_SIZE() in both loops to prevent a potential out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 19 Oct |
| CVE-2026-89783 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full The depth check in xfrm6_input_addr() is off by one: if (1 + sp->len == XFRM_MAX_DEPTH) goto drop; ... sp->xvec[sp->len++] = x; xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode receive path re-enters IPv6 input via xfrm_trans_reinject() with that secpath preserved. If the inner packet carries a destination-options HAO option or a type-2 routing header, xfrm6_input_addr() is called with sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS flags it and panics under panic_on_warn. Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also restores one chain level the old check rejected at sp->len == 5. UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10 index 6 is out of range for type 'xfrm_state *[6]' | 19 Oct |
| CVE-2026-89674 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR length calculation in nfsd4_ff_encode_layoutget The XDR buffer size calculation in nfsd4_ff_encode_layoutget() has multiple errors that can result in either an out-of-bounds write or leaking uninitialized kernel memory to the client: - fh_len doesn't account for XDR padding on the file handle data - uid and gid lengths use "8 + len" but xdr_encode_opaque() actually writes "4 + xdr_align_size(len)" bytes - ds_len omits the flags and stats_collect_hint fields (8 bytes), while len's header constant overestimates by 8 bytes -- these partially cancel but leave a net mismatch The worst case occurs with short strings (e.g. uid=0, gid=0 with an odd-sized file handle), where the function writes up to 5 bytes past the reserved XDR buffer. Conversely, when string lengths happen to be 4-byte aligned, the reservation is too large and stale buffer content is sent to the client. Fix this by breaking out every encoded field explicitly in the ds_len calculation, using xdr_align_size() for all variable-length opaque fields, and correcting the header constants. | 19 Oct |
| CVE-2026-89662 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent lock owner use-after-free during client teardown __destroy_client() releases a client's open owners, but a lock owner whose only reference is a blocked lock (nbl) stays on cl_ownerstr_hashtbl. client_has_state() does not count a bare owner, so DESTROY_CLIENTID can reach __destroy_client() with such owners present. __destroy_client() then walks the table, calling remove_blocked_locks() on each owner without a reference. Freeing a blocked lock drops the owner reference held via flc_owner. The per-net laundromat reaps blocked locks from nn->blocked_locks_lru independently of client state. The two paths share blocked_locks_lock only for the list splice, not the owner's lifetime. The laundromat therefore frees the owner as __destroy_client() dereferences it, a NULL dereference in remove_blocked_locks(). nfsd4_release_lockowner() holds a reference across the same call; __destroy_client() does not. Hold cl_lock across the walk, taking a reference and unhashing each owner, then drop it before remove_blocked_locks() and nfs4_put_stateowner(), which take blocked_locks_lock and cl_lock. | 19 Oct |
| CVE-2026-89555 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mpls: reload header after pskb_may_pull() mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop when an MPLS route has multiple nexthops. While walking the MPLS label stack, the hash routine caches hdr for the current label. After finding the bottom-of-stack label, it calls pskb_may_pull() before reading the inner IP header. If an skb is constructed with the inner IP header in nonlinear data and insufficient tailroom in the linear head, pskb_may_pull() calls pskb_expand_head() to replace the skb head and free the old one. This leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr again when it performs a second pull for the larger header. The issue was found through static analysis. A reproducer sending a legal Geneve packet through a bareudp/MPLS multipath setup triggered the same KASAN report in 2 of 2 unpatched runs: BUG: KASAN: slab-use-after-free in mpls_select_multipath Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23 Call Trace: mpls_select_multipath mpls_forward __netif_receive_skb_list_core netif_receive_skb_list_internal napi_complete_done gro_cell_poll __napi_poll net_rx_action Freed by task 23: kfree pskb_expand_head __pskb_pull_tail mpls_select_multipath Reload hdr from the current skb head after each successful pull before deriving the inner IPv4 or IPv6 header pointer. | 19 Oct |
| CVE-2026-81002 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect callers already handle a NULL conversion result. BUG: KASAN: slab-out-of-bounds in skb_gro_receive Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146 Call Trace: skb_gro_receive (net/core/gro.c:174) udp_gro_receive (net/ipv4/udp_offload.c:812) inet_gro_receive (net/ipv4/af_inet.c:1539) dev_gro_receive (net/core/gro.c:515) gro_receive_skb (net/core/gro.c:633) cpu_map_kthread_run (kernel/bpf/cpumap.c:395) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) Kernel panic - not syncing: KASAN: panic_on_warn set ... | 19 Oct |
| CVE-2026-80986 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages On a link whose device has max_recv_sge == 1 there is no shared v2 receive buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44 bytes past the start of the queue entry's inline message: ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE); The entry is a 72-byte allocation and the extension starts at offset 68, so ext->num_rkeys at offset 94 is already past it. This happens on every SMC-Rv2 link addition, whatever the peer sends: [ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106 [ 2.490709] [ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy) [ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.490798] Call Trace: [ 2.490803] <TASK> [ 2.490805] dump_stack_lvl+0x53/0x70 [ 2.490810] print_report+0xd0/0x630 [ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490834] kasan_report+0xce/0x100 [ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0 [ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80 [ 2.490848] ? smc_llc_wait+0x355/0x810 [ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10 [ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10 [ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10 [ 2.490863] __smc_connect+0x3f5c/0x4980 [ 2.490873] ? __pfx_kernel_connect+0x10/0x10 [ 2.490888] ? __pfx___smc_connect+0x10/0x10 [ 2.490891] ? release_sock+0x148/0x1d0 [ 2.490894] smc_connect+0x42c/0x580 [ 2.490896] __sys_connect+0xfc/0x130 [ 2.490898] ? __pfx___sys_connect+0x10/0x10 [ 2.490900] ? handle_mm_fault+0x1a1/0x430 [ 2.490908] __x64_sys_connect+0x6d/0xb0 [ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0 [ 2.490917] do_syscall_64+0xf9/0x540 [ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2.490924] RIP: 0033:0x421bb4 [ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55 [ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a [ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4 [ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003 [ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000 [ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006 [ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90 [ 2.490940] </TASK> [ 2.490941] [ 2.499545] Allocated by task 44: [ 2.499693] kasan_save_stack+0x33/0x60 [ 2.499860] kasan_save_track+0x14/0x30 [ 2.500026] __kasan_kmalloc+0x8f/0xa0 [ 2.500190] __kmalloc_cache_noprof+0x158/0x370 [ 2.500393] smc_llc_enqueue+0x72/0x560 [ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.500747] tasklet_action_common+0x20f/0x8a0 [ 2.500945] handle_softirqs+0x18e/0x590 [ 2.501115] do_softirq+0x3b/0x60 [ 2.501266] __local_bh_enable_ip+0x61/0x70 [ 2.501446] __alloc_skb+0x732/0x890 [ 2.501604] rxe_init_packet+0x16b/0x4f0 [ 2.501783] prepare_ack_packet+0xb8/0x830 [ 2.501962] rxe_receiver+0x495/0x96e0 [ 2.502125] do_work+0x144/0x470 [ 2.502269] process_one_work+0x633/0x1030 [ 2.502450] worker_thread+0x45b/0xd10 [ 2.50261 ---truncated--- | 19 Oct |
| CVE-2026-80981 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free of the LLC qentry in smc_llc_srv_add_link() smc_llc_srv_add_link() keeps add_llc pointing into the queue entry: add_llc = &qentry->msg.add_link; smc_llc.c:1482 ... smc_llc_save_add_link_info(link_new, add_llc); smc_llc.c:1494 smc_llc_flow_qentry_del(&lgr->llc_flow_lcl); smc_llc.c:1495 ... u8 *llc_msg = smc_link_shared_v2_rxbuf(link) ? (u8 *)lgr->wr_rx_buf_v2 : (u8 *)add_llc; smc_llc.c:1504 smc_llc_save_add_link_rkeys(link, link_new, llc_msg); smc_llc.c:1506 smc_llc_flow_qentry_del() kfree()s the entry, so on a link without a shared v2 receive buffer the pointer handed to smc_llc_save_add_link_rkeys() is already freed. Before the Fixes: commit that branch always used lgr->wr_rx_buf_v2 and add_llc was not used after the free. Reproduced on an unpatched tree over rxe, with KASAN, kasan_multi_shot and a link forced to max_recv_sge == 1: the entry is freed and read by the same call, and the freeing frame is smc_llc_srv_add_link() itself. [ 2.523161] BUG: KASAN: slab-use-after-free in smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523499] Read of size 2 at addr ffff8880052194de by task kworker/0:1/11 [ 2.523789] [ 2.523862] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5-p0-g2c9dd296545d #35 PREEMPT(lazy) [ 2.523865] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 2.523866] Workqueue: smc_hs_wq smc_listen_work [ 2.523869] Call Trace: [ 2.523870] <TASK> [ 2.523871] dump_stack_lvl+0x53/0x70 [ 2.523872] print_report+0xd0/0x630 [ 2.523874] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 2.523876] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523878] kasan_report+0xce/0x100 [ 2.523879] ? smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523881] smc_llc_save_add_link_rkeys+0x333/0x350 [ 2.523883] ? smcr_buf_reg_lgr+0x2a4/0x660 [ 2.523885] smc_llc_srv_add_link+0xaa2/0x1e50 [ 2.523888] ? _printk+0xba/0xf0 [ 2.523897] ? __pfx_smc_llc_srv_add_link+0x10/0x10 [ 2.523899] ? down_write+0xb0/0x130 [ 2.523903] ? __pfx_down_write+0x10/0x10 [ 2.523905] smc_listen_work+0x489e/0x4d00 [ 2.523907] ? kmem_cache_free+0x1c6/0x3a0 [ 2.523911] ? __pfx_smc_listen_work+0x10/0x10 [ 2.523913] ? release_sock+0x148/0x1d0 [ 2.523915] ? smc_tcp_listen_work+0xb4f/0xfc0 [ 2.523917] ? _raw_spin_lock_irq+0x80/0xe0 [ 2.523918] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 2.523920] process_one_work+0x633/0x1030 [ 2.523922] ? assign_work+0x11d/0x370 [ 2.523924] worker_thread+0x45b/0xd10 [ 2.523926] ? __pfx_worker_thread+0x10/0x10 [ 2.523928] ? __pfx_worker_thread+0x10/0x10 [ 2.523929] kthread+0x2c6/0x3b0 [ 2.523931] ? recalc_sigpending+0x15c/0x1e0 [ 2.523934] ? __pfx_kthread+0x10/0x10 [ 2.523935] ret_from_fork+0x36e/0x5a0 [ 2.523937] ? __pfx_ret_from_fork+0x10/0x10 [ 2.523938] ? __switch_to+0x572/0xdd0 [ 2.523943] ? __pfx_kthread+0x10/0x10 [ 2.523944] ret_from_fork_asm+0x1a/0x30 [ 2.523947] </TASK> [ 2.523948] [ 2.531253] Allocated by task 48: [ 2.531399] kasan_save_stack+0x33/0x60 [ 2.531570] kasan_save_track+0x14/0x30 [ 2.531737] __kasan_kmalloc+0x8f/0xa0 [ 2.531905] __kmalloc_cache_noprof+0x158/0x370 [ 2.532100] smc_llc_enqueue+0x72/0x560 [ 2.532268] smc_wr_rx_tasklet_fn+0x474/0xa80 [ 2.532491] tasklet_action_common+0x20f/0x8a0 [ 2.532714] handle_softirqs+0x18e/0x590 [ 2.532886] do_softirq+0x3b/0x60 [ 2.533036] __local_bh_enable_ip+0x61/0x70 [ 2.533221] __alloc_skb+0x732/0x890 [ 2.533384] rxe_init_packet+0x16b/0x4f0 [ 2.533567] prepare_ack_packet+0xb8/0x830 [ 2.533760] rxe_receiver+0x495/0x96e0 [ 2.533933] do_work+0x144/0x470 [ 2 ---truncated--- | 19 Oct |
| CVE-2026-80976 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index and L3 slave state. Restore both after the clear and set nhoff to the inner IPv6 base-header nexthdr field. Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can replace skb_iif with the L3 master while IP6CB keeps the receiving interface. Preserve IP6SKB_L3SLAVE for the same reason. | 19 Oct |
| CVE-2026-80630 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever fq_codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though fq_codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a recent report [1] and a wild memory access in qfq: [ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full) [ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216 [ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000 [ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000 [ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024 [ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000 [ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578 [ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000 [ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0 [ 29.376103][ T360] PKRU: 55555554 [ 29.376258][ T360] Call Trace: [ 29.376401][ T360] <TASK> ... [ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057) [ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. [1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ | 16 Oct |
| CVE-2026-74493 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until termination has finished using the socket. | 16 Oct |
| CVE-2026-74480 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | 16 Oct |
| CVE-2026-74427 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: afs: Fix netns teardown to cancel the preallocation charger Fix the teardown of an afs network namespace to make sure it cancels the work item that keeps the preallocated rxrpc call/conn/peer queue charged before incoming calls are disabled (i.e. listen 0). Also, if net->live is false because the afs netns is being deleted, make afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid requeuing the charger. (This was found by AI review). | 16 Oct |
| CVE-2026-74398 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault: 0000 [#1] SMP NOPTI CPU: 4 PID: 217 Comm: kworker/4:1 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:ipv6_del_addr+0xe9/0x280 RAX: dead000000000122 Call Trace: addrconf_dad_stop+0x113/0x140 addrconf_dad_work+0x28c/0x430 process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 ret_from_fork+0x35/0x40 Fold the addrconf_dad_end() logic into addrconf_dad_failure() under a single ifp->lock critical section. The STABLE_PRIVACY branch temporarily drops ifp->lock around address regeneration, so at lock_errdad: verify the state is still POSTDAD before transitioning to ERRDAD; bail out otherwise to avoid overwriting a state set by another path while the lock was released. | 16 Oct |
| CVE-2026-74268 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too. | 16 Oct |
| CVE-2026-74267 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. | 16 Oct |
| CVE-2026-74255 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/[email protected]/T/#u | 16 Oct |
| CVE-2026-72491 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/9p: fix race condition on rdma->state in trans_rdma.c The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to protect the read-modify-write of rdma->state The race can cause lost state transitions: recv_done() or the CM event handler could set state to FLUSHING/CLOSED while rdma_request() is concurrently checking or modifying state under the lock, leading to the FLUSHING transition being silently overwritten by CLOSING. This corrupts the connection state machine and can cause use-after-free on RDMA request objects during teardown. Fix by adding req_lock protection to all rdma->state modifications in recv_done() and p9_cm_event_handler(), matching the pattern already used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore in the CM event handler since it can race with recv_done() which runs in softirq context. Tested with a kernel module that races two threads (simulating rdma_request and recv_done/CM handler) on rdma->state with proper locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost transitions. | 16 Oct |
| CVE-2026-72299 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 </TASK> The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context. | 16 Oct |
| CVE-2026-72251 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: reload possible stale data pointer quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream. | 16 Oct |
| CVE-2026-64125 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. | 16 Oct |
| CVE-2025-68192 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: initialize MAC header offset in qmimux_rx_fixup Raw IP packets have no MAC header, leaving skb->mac_header uninitialized. This can trigger kernel panics on ARM64 when xfrm or other subsystems access the offset due to strict alignment checks. Initialize the MAC header to prevent such crashes. This can trigger kernel panics on ARM when running IPsec over the qmimux0 interface. Example trace: Internal error: Oops: 000000009600004f [#1] SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.34-gbe78e49cb433 #1 Hardware name: LS1028A RDB Board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xfrm_input+0xde8/0x1318 lr : xfrm_input+0x61c/0x1318 sp : ffff800080003b20 Call trace: xfrm_input+0xde8/0x1318 xfrm6_rcv+0x38/0x44 xfrm6_esp_rcv+0x48/0xa8 ip6_protocol_deliver_rcu+0x94/0x4b0 ip6_input_finish+0x44/0x70 ip6_input+0x44/0xc0 ipv6_rcv+0x6c/0x114 __netif_receive_skb_one_core+0x5c/0x8c __netif_receive_skb+0x18/0x60 process_backlog+0x78/0x17c __napi_poll+0x38/0x180 net_rx_action+0x168/0x2f0 | 15 Oct |
| CVE-2023-54237 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link() There is a certain chance to trigger the following panic: PID: 5900 TASK: ffff88c1c8af4100 CPU: 1 COMMAND: "kworker/1:48" #0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7 #1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a #2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60 #3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7 #4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715 #5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654 #6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62 [exception RIP: ib_alloc_mr+19] RIP: ffffffffc0c9cce3 RSP: ffff9456c1cc7c38 RFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000004 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88c1ea281d00 R8: 000000020a34ffff R9: ffff88c1350bbb20 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000010 R14: ffff88c1ab040a50 R15: ffff88c1ea281d00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc] #8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc] #9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc] The reason here is that when the server tries to create a second link, smc_llc_srv_add_link() has no protection and may add a new link to link group. This breaks the security environment protected by llc_conf_mutex. | 15 Oct |
| CVE-2023-54094 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: prevent skb corruption on frag list segmentation Ian reported several skb corruptions triggered by rx-gro-list, collecting different oops alike: [ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 62.631083] #PF: supervisor read access in kernel mode [ 62.636312] #PF: error_code(0x0000) - not-present page [ 62.641541] PGD 0 P4D 0 [ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364 [ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022 [ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858 ./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261 net/ipv4/udp_offload.c:277) [ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246 [ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000 [ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4 [ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9 [ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2 [ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9 [ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000) knlGS:0000000000000000 [ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0 [ 62.749948] Call Trace: [ 62.752498] <TASK> [ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398) [ 62.787605] skb_mac_gso_segment (net/core/gro.c:141) [ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2)) [ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862 net/core/dev.c:3659) [ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710) [ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330) [ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210) net/netfilter/core.c:626) [ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55) [ 62.825652] maybe_deliver (net/bridge/br_forward.c:193) [ 62.829420] br_flood (net/bridge/br_forward.c:233) [ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215) [ 62.837403] br_handle_frame (net/bridge/br_input.c:298 net/bridge/br_input.c:416) [ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387) [ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570) [ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638 net/core/dev.c:5727) [ 62.876795] napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067) [ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191) [ 62.893534] __napi_poll (net/core/dev.c:6498) [ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89 net/core/dev.c:6640) [ 62.905276] kthread (kernel/kthread.c:379) [ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314) [ 62.917119] </TASK> In the critical scenario, rx-gro-list GRO-ed packets are fed, via a bridge, both to the local input path and to an egress device (tun). The segmentation of such packets unsafely writes to the cloned skbs with shared heads. This change addresses the issue by uncloning as needed the to-be-segmented skbs. | 15 Oct |
| CVE-2025-40350 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run. Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same. This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it. To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes. | 14 Oct |
| CVE-2026-74628 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free of the socket by its timers The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 14 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.