Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-53985 | 8.7 high | 1.0% | no CPE yet | Ground Station prior to 0.6.0 contains an unauthenticated denial-of-service vulnerability in the Socket.IO server's service_control event handler that allows any unauthenticated network peer to forcibly terminate the ground-station process by sending a single restart_service command. Attackers can connect to the Socket.IO server on port 7000 without credentials due to disabled authentication enforcement and a wildcard CORS policy, then emit the service_control event to terminate all active satellite-tracking sessions, SDR recording pipelines, demodulators, decoders, and rotator controllers, with repeated triggering possible in Docker deployments to create a persistent denial-of-service condition. | Sat 24 Oct |
| CVE-2026-69219 | 8.7 high | 1.0% | no CPE yet | The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java uses ValueReader.readBytes to accept a wire-declared contentLength below Integer.MAX_VALUE and allocate a byte array before checking the bytes available in the frame. A malicious AMQP peer can send a LongString or byte-array field with type tag S and a declared length such as 0x7FFFFFFE during the pre-authentication connection.start server-properties table, causing an approximately 2 GB allocation and OutOfMemoryError before readFully consumes data. The resulting memory exhaustion can terminate the JVM and cause denial of service. This issue is fixed in version 5.33.1. | 22 Oct |
| CVE-2026-69220 | 8.7 high | 1.0% | no CPE yet | The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java permits ValueReader.readTable and ValueReader.readArray to call ValueReader.readFieldValue recursively for AMQP table type F and AMQP array type A values without a nesting-depth limit. A malicious AMQP server or network intermediary can send approximately 580 nested table levels in the pre-authentication connection.start frame, fitting within the default 131072-byte frame maximum, to trigger StackOverflowError. The error terminates the client input processing thread and causes denial of service. This issue is fixed in version 5.33.1. | 22 Oct |
| CVE-2026-82026 | 8.7 high | 1.0% | no CPE yet | Radar before 1.12.2 contains a missing authorization vulnerability in the handleLocalTerminal WebSocket endpoint (/api/local-terminal) that allows authenticated or unauthenticated attackers to spawn a privileged shell by relying only on a runtime-mode check instead of role-based access control. Attackers can connect to the endpoint to execute /bin/bash -l on the Radar host with Radar's own kubeconfig and process credentials injected into the shell environment, achieving remote code execution with Radar's privileges even when the --disable-local-terminal flag is set. | 16 Oct |
| CVE-2025-41109 | 8.7 high | 1.0% | ghostrobotics, vision_60_firmware | Ghost Robotics Vision 60 v0.27.2 includes, among its physical interfaces, three RJ45 connectors and a USB Type-C port. The vulnerability is due to the lack of authentication mechanisms when establishing connections through these ports. Specifically, with regard to network connectivity, the robot's internal router automatically assigns IP addresses to any device physically connected to it. An attacker could connect a WiFi access point under their control to gain access to the robot's network without needing the credentials for the deployed network. Once inside, the attacker can monitor all its data, as the robot runs on ROS 2 without authentication by default. | 8 Oct |
| CVE-2026-107815 | 8.5 high | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the CONNECT engine's DOS table type used an incorrect boundary check that permitted a one-byte null write beyond a stack buffer at an attacker-controlled offset. An authenticated user able to use the CONNECT engine could cause a crash and potentially remote code execution. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. | 14 Oct |
| CVE-2025-27262 | 8.5 high | 1.0% | ericsson, indoor_connect_8855_firmware | Ericsson Indoor Connect 8855 contains a command injection vulnerability which if exploited can result in an escalation of privileges. | 11 Oct |
| CVE-2026-32064 | 8.5 high | 1.0% | openclaw | OpenClaw versions prior to 2026.2.21 sandbox browser entrypoint launches x11vnc without authentication for noVNC observer sessions, allowing unauthenticated access to the VNC interface. Remote attackers on the host loopback interface can connect to the exposed noVNC port to observe or interact with the sandbox browser without credentials. | 8 Oct |
| CVE-2026-47719 | 8.2 high | 1.0% | no CPE yet | FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.2, the DEVICE_WEBAPI_REQUEST and DEVICE_PROPERTY Socket.IO handlers in server/runtime/index.js omit isSocketWriteAuthorized and accept attacker-controlled property.address or endpoint connection data. A remote unauthenticated attacker can make server/runtime/devices/httprequest/index.js call axios.get against arbitrary HTTP or HTTPS destinations, connect to reachable OPC UA or ODBC services, and receive results through the corresponding Socket.IO event. This read SSRF oracle can expose cloud instance metadata, internal administrative services, industrial endpoints, and ODBC data reachable from the FUXA host, including when secureEnabled is true. This issue is fixed in version 1.3.2. | 22 Oct |
| CVE-2026-101292 | 8.2 high | 1.0% | no CPE yet | Apache ActiveMQ Artemis before 2.34.0 contains an unsafe reflection vulnerability in FederationStreamConnectMessage.getFederationPolicy(). The method calls Class.forName(clazz).getConstructor().newInstance() where clazz is read directly from the CORE protocol wire buffer without type validation. An authenticated federation peer can send a FEDERATION_DOWNSTREAM_CONNECT packet with a crafted class name, causing the broker to load and instantiate arbitrary classes visible to the Artemis module classloader. Static initializers (<clinit>) and no-argument constructors (<init>()) execute as side effects before the type cast, enabling denial of service via system-property poisoning, out-of-memory conditions via classloading, or broker state manipulation. | 20 Oct |
| CVE-2026-84782 | 8.2 high | 1.0% | openssl | Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (returning WANT_WRITE) if the underlying transport temporarily cannot accept more data. While such a write is suspended, the DTLS retransmission timer may independently fire and ask the retransmission logic to resend an earlier, already-acknowledged-as-sent message from its retransmit queue. The retransmission logic reused the same internal buffer and position tracking as the message that was still being written, without resetting the position back to the start of the message being retransmitted. As a result the retransmission was read starting from wherever the suspended write had left off, producing a mislabelled message whose body was leftover bytes from the other, larger message still in flight - content that was never meant to be sent at that point, and which could run past the end of the allocated buffer. Separately, even when the retransmission is positioned correctly, allowing it to run to completion while another write is suspended overwrites the same shared bookkeeping that the suspended write depends on to resume. When the application later resumes the suspended write (via a subsequent SSL_read(), SSL_write(), SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a state inconsistent with the message and aborts the process in a debugging build. The fix resets the retransmission's read position to the start of the message before resending, and skips retransmission entirely whenever a handshake write is still suspended, deferring to the next call that resumes it instead. FIPS impact: no The affected code is outside the FIPS module boundary. | 8 Oct |
| CVE-2026-57817 | 8.1 high | 1.0% | apache, cxf | The OpenID Connect Core 1.0 specification mandates that the RP MUST validate the `c_hash` parameter when operating in the Hybrid Flow. If an Apache CXF RP is integrated with a non-compliant or misconfigured Identity Provider (IdP) that omits the `c_hash`, the RP becomes vulnerable to Authorization Code Substitution/Injection attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. | Sat 24 Oct |
| CVE-2026-54593 | 8.1 high | 1.0% | no CPE yet | Pterodactyl is a free, open-source game server management panel. Prior to Panel version 1.12.3 and Wings version 1.12.2, the Wings /upload/file endpoint accepted any valid panel-signed JWT that contained server_uuid, user_uuid, and unique_id claims without checking the token's intended purpose; because the Panel issues JWTs carrying those same claims for lower-privilege operations such as WebSocket authentication and file-download links, an authenticated subuser could reuse one of those tokens (for example a WebSocket token obtained with only the websocket.connect permission) by replaying it against /upload/file to write arbitrary files to the same server, despite never being granted the file.create permission. This issue is fixed in Panel version 1.12.3 and Wings version 1.12.2. | Sat 24 Oct |
| CVE-2025-40133 | 8.1 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable(). mptcp_active_enable() is called from subflow_finish_connect(), which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always under RCU. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). | 19 Oct |
| CVE-2025-21079 | 8.1 high | 1.0% | samsung, members | Improper input validation in Samsung Members prior to version 5.5.01.3 allows remote attackers to connect arbitrary URL and launch arbitrary activity with Samsung Members privilege. User interaction is required for triggering this vulnerability. | 18 Oct |
| CVE-2025-34207 | 7.9 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to 22.0.1049 and Application prior to 20.0.2786 (VA and SaaS deployments) configure the SSH client within Docker instances with the following options: `UserKnownHostsFile=/dev/null`, `StrictHostKeyChecking=no`, and `ForwardAgent yes`. These settings disable verification of the remote host’s SSH key and automatically forward the developer’s SSH‑agent to any host that matches the configured wildcard patterns. As a result, an attacker who can reach a single compromised container can cause the container to connect to a malicious SSH server, capture the forwarded private keys, and use those keys for unrestricted lateral movement across the environment. This vulnerability has been identified by the vendor as: V-2024-027 — Insecure Secure Shell (SSH) Configuration. | 18 Oct |
| CVE-2024-36904 | 7.8 high | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK> | 15 Oct |
| CVE-2023-29104 | 7.6 high | 1.0% | siemens, 6gk1411-1ac00_firmware, 6gk1411-5ac00_firmware | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The filename in the upload feature of the web based management of the affected device is susceptible to a path traversal vulnerability. This could allow an authenticated privileged remote attacker to overwrite any file the Linux user `ccuser` has write access to, or to download any file the Linux user `ccuser` has read-only access to. | Sat 24 Oct |
| CVE-2025-55148 | 7.6 high | 1.0% | ivanti, connect_secure, policy_secure, zero_trust_access_gateway | Missing authorization in Ivanti Connect Secure before 22.7R2.9 or 22.8R2, Ivanti Policy Secure before 22.7R1.6, Ivanti ZTA Gateway before 2.8R2.3-723 and Ivanti Neurons for Secure Access before 22.8R1.4 (Fix deployed on 02-Aug-2025) allows a remote authenticated attacker with read-only admin privileges to configure restricted settings. | 18 Oct |
| CVE-2026-100169 | 7.6 high | 1.0% | no CPE yet | Improper Authentication in the social account linking path of the Prowler API in Prowler from 5.4.0 before 5.35.0 allows a remote unauthenticated attacker to obtain persistent access to the account of a user who has not yet registered, because ProwlerSocialAccountAdapter.pre_social_login() in api/src/backend/api/adapters.py links a Google or GitHub login to any existing local account that has the same email address as the one returned by the provider, without requiring that the address has been verified by the provider or on the existing account, and without any other check that both accounts belong to the same person. Self registration is open and the new account is usable at once, because UserViewSet.get_permissions() in api/src/backend/api/v1/views.py grants AllowAny to the create action, ACCOUNT_EMAIL_VERIFICATION is set to none in api/src/backend/config/settings/social_login.py, and the Django ModelBackend checks only the password and is_active, not the django-allauth EmailAddress record. An attacker who registers an email address before its owner keeps the password set at registration after the link is made, because sociallogin.connect() does not reset the password and does not disable the existing account, and the owner who later signs in with Google or GitHub is logged into the attacker's account. django-allauth makes the same email based link on its own, because SOCIALACCOUNT_EMAIL_AUTHENTICATION and SOCIALACCOUNT_EMAIL_AUTHENTICATION_AUTO_CONNECT are both set to True in the same settings module. This gives the attacker the cloud provider credentials, scan findings and tenant memberships held in the account. | 16 Oct |
| CVE-2026-47296 | 7.5 high | 1.0% | microsoft, microsoft sql server 2016 service pack 3 (gdr), microsoft sql server 2016 service pack 3 azure connect feature pack, microsoft sql server 2017 (cu 31) | Improper neutralization of special elements used in an sql command ('sql injection') in SQL Server allows an authorized attacker to elevate privileges over a network. | Wed 28 Oct |
| CVE-2026-57195 | 7.5 high | 1.0% | no CPE yet | Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the `Asterisk Manager Interface (AMI)` may allow an unauthenticated attacker to crash Asterisk when `Digest Authentication` is used via `HTTP`. The Asterisk `HTTP` web server, AMI, and AMI access via `HTTP` must all be enabled; each is disabled by default. The attacker must be able to connect to the `HTTP` server, which binds only to `127.0.0.1` by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. | Wed 28 Oct |
| CVE-2026-27857 | 7.5 high | 1.0% | dovecot, open-xchange | Sending "NOOP (((...)))" command with 4000 parenthesis open+close results in ~1MB extra memory usage. Longer commands will result in client disconnection. This 1 MB can be left allocated for longer time periods by not sending the command ending LF. So attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Install fixed version, there is no other remediation. No publicly available exploits are known. | Mon 26 Oct |
| CVE-2026-4634 | 7.5 high | 1.0% | redhat, build_of_keycloak | A flaw was found in Keycloak. An unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with an excessively long scope parameter to the OpenID Connect (OIDC) token endpoint. This leads to high resource consumption and prolonged processing times, ultimately resulting in a Denial of Service (DoS) for the Keycloak server. | Mon 26 Oct |
| CVE-2026-44240 | 7.5 high | 1.0% | no CPE yet | basic-ftp is an FTP client for Node.js. Prior to 5.3.1, basic-ftp is vulnerable to client-side denial of service when parsing FTP control-channel multiline responses. A malicious or compromised FTP server can send an unterminated multiline response during the initial FTP banner phase, before authentication. The client keeps appending attacker-controlled data into FtpContext._partialResponse and repeatedly reparses the accumulated buffer without enforcing a maximum control response size. As a result, an application using basic-ftp can remain stuck in connect() while memory and CPU usage grow under attacker-controlled input. This can lead to process-level denial of service, container OOM kills, worker restarts, queue backlog, or service degradation in applications that automatically connect to FTP endpoints. This vulnerability is fixed in 5.3.1. | Mon 26 Oct |
| CVE-2026-58210 | 7.5 high | 1.0% | linuxfoundation, nats-server | NATS Server is a high-performance server for NATS.io, the cloud and edge native messaging system. Prior to 2.14.3 and 2.12.12, an unauthenticated MQTT client could cause the server to retain large incomplete MQTT CONNECT packets before authentication completed, consuming server memory while the parser waited for the advertised MQTT packet length. This issue is fixed in versions 2.14.3 and 2.12.12. | Sun 25 Oct |
| CVE-2023-29105 | 7.5 high | 1.0% | siemens, 6gk1411-1ac00_firmware, 6gk1411-5ac00_firmware | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device is vulnerable to a denial of service while parsing a random (non-JSON) MQTT payload. This could allow an attacker who can manipulate the communication between the MQTT broker and the affected device to cause a denial of service (DoS). | Fri 23 Oct |
| CVE-2023-29106 | 7.5 high | 1.0% | siemens, 6gk1411-1ac00_firmware, 6gk1411-5ac00_firmware | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The export endpoint is accessible via REST API without authentication. This could allow an unauthenticated remote attacker to download the files available via the endpoint. | Fri 23 Oct |
| CVE-2026-14519 | 7.5 high | 1.0% | ibm, app_connect_enterprise | IBM App Connect Enterprise 13.0.1.0 through 13.0.7.2, and 12.0.1.0 through 12.0.12.27 could allow a remote attacker to read arbitrary files due to a path traversal vulnerability. | Fri 23 Oct |
| CVE-2026-63337 | 7.5 high | 1.0% | no CPE yet | The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.tools.jsonrpc.ProcedureDescription receives a javaReturnType value in an untrusted system.describe response and passes it through JSONUtil.tryFill, setJavaReturnType, and computeReturnTypeAsJavaClass to Class.forName(javaReturnType) with initialization enabled. An attacker able to answer the JsonRpcClient request through a shared broker or network interception can select a class already present in the victim JVM and trigger its static initializer, while JsonRpcClient.java later passes getReturnType output to mapper.parse and may also create type confusion. Successful exploitation can affect confidentiality, integrity, and availability in the client process. This issue is fixed in version 5.33.0. | 22 Oct |
| CVE-2026-64048 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. | 19 Oct |
| CVE-2026-22998 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated | 19 Oct |
| CVE-2025-61920 | 7.5 high | 1.0% | authlib | Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.5, Authlib’s JOSE implementation accepts unbounded JWS/JWT header and signature segments. A remote attacker can craft a token whose base64url‑encoded header or signature spans hundreds of megabytes. During verification, Authlib decodes and parses the full input before it is rejected, driving CPU and memory consumption to hostile levels and enabling denial of service. Version 1.6.5 patches the issue. Some temporary workarounds are available. Enforce input size limits before handing tokens to Authlib and/or use application-level throttling to reduce amplification risk. | 19 Oct |
| CVE-2026-93568 | 7.5 high | 1.0% | no CPE yet | A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss. | 19 Oct |
| CVE-2026-98257 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: rds: ib: use rds_conn_drop() on protocol version mismatch rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with conn->c_cm_lock held. When the peer negotiates a protocol version older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls rds_conn_destroy(), which is only safe in the rmmod path: it synchronously tears the connection down and flush_work()es the shutdown work cp_down_w. That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is the very lock the event handler still holds, so the flush never completes: the two workers wait on each other and the RDS connection workqueues stall for good. All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR, DISCONNECTED) use rds_conn_drop(), which marks the connection RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use it here as well. | 19 Oct |
| CVE-2026-90102 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4. Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL. Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time. | 19 Oct |
| CVE-2026-72242 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: selinux: avoid sk_socket dereference in selinux_sctp_bind_connect() selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a struct socket * to selinux_socket_bind() and selinux_socket_connect_helper(). However, when the hook is invoked from the ASCONF softirq path (sctp_process_asconf), there is no file reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt callers (bindx, connectx, set_primary, sendmsg connect) hold a file reference and are not affected. Both selinux_socket_bind() and selinux_socket_connect_helper() immediately resolve sock->sk, never using the struct socket * for anything else. Refactor the inner logic into helpers that take a struct sock * directly so that selinux_sctp_bind_connect() never needs to touch sk->sk_socket at all. | 16 Oct |
| CVE-2026-31711 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | 15 Oct |
| CVE-2026-106121 | 7.5 high | 1.0% | vmware, rabbitmq_java_client | The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.37.0, com.rabbitmq.tools.json.JSONReader.read() fails to terminate when input ends inside a quoted string or a line comment because its string and whitespace scanners do not stop at CharacterIterator.DONE. The default DefaultJsonRpcMapper passes JSON-RPC message bodies to this parser for JsonRpcServer and client replies. A truncated string causes the parser to append replacement end markers until heap exhaustion, while a line comment without a terminating newline can keep a thread consuming CPU indefinitely, resulting in denial of service. This issue is fixed in version 5.37.0. | 9 Oct |
| CVE-2025-34248 | 7.2 high | 1.0% | no CPE yet | D-Link Nuclias Connect firmware versions < 1.3.1.4 contain a directory traversal vulnerability within /api/web/dnc/global/database/deleteBackup due to improper sanitization of the deleteBackupList parameter. This can allow an authenticated attacker to delete arbitrary files impacting the integrity and availability of the system. | Fri 23 Oct |
| CVE-2026-114624 | 7.2 high | 1.0% | no CPE yet | baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the widget-area entity serializes widgets only when the submitted value is an array, allowing a string submitted through the admin JSON API to be stored unchanged. Entity reads, including front-end rendering and API responses, deserialize the stored value with unserialize() without an allowed_classes restriction, accepting both raw and base64-encoded serialized data. An administrator, or an attacker who obtains widget-write capability through a separate vulnerability such as chained XSS, can plant an object graph that subsequently triggers on unauthenticated page requests. Two demonstrated gadget chains in the default dependency set use composer/composer ProcessExecutor::startJob() with Process::fromShellCommandline(), or logiscape/mcp-sdk-php StdioTransport::connect() with StdioServerParameters, to reach proc_open() and execute commands as the web-server user. Deserialization bypasses constructor-based readonly safeguards, and the stored payload can execute repeatedly until the database row is repaired. Unauthenticated page access is a trigger after privileged payload storage, not an unauthenticated means of initially planting the payload. This issue has been patched in versions 5.3.2 and 5.4.2. | Fri 23 Oct |
| CVE-2026-105660 | 6.9 medium | 1.0% | no CPE yet | Improper Validation of Syntactic Correctness of Input vulnerability in mtrudel bandit allows an unauthenticated remote attacker to set conn.host and conn.port to values outside the RFC 3986 host grammar via the authority of an HTTP/1 absolute-form or authority-form request target. Bandit validates the Host header and answers 400 when it is malformed, but when the request target carries its own authority that authority takes precedence, as RFC 9112 requires, and Bandit.Pipeline.determine_host_and_port!/4 in lib/bandit/pipeline.ex passes it to the application unchecked. A request line such as GET http://[email protected]/x HTTP/1.1 with a valid Host header yields a conn.host of [email protected], and the same path admits NUL, DEL and non-ASCII bytes, invalid IP literals and ports outside 1..65535. The HTTP/1.0 clause needs no Host header at all, and CONNECT places the unparsed port string in conn.port. Applications that build absolute URLs from conn.host, such as through Plug.Conn.request_url/1 or Phoenix URL helpers, emit links whose authority the attacker chose. Message framing is unaffected, and no CR or LF can reach conn.host. This issue affects bandit: from 0.6.0 before 1.13.0. | 16 Oct |
| CVE-2026-101899 | 6.9 medium | 1.0% | no CPE yet | Axios is a promise-based HTTP client for the browser and Node.js. From 1.15.0 until 1.20.0, Axios shouldBypassProxy treats the NO_PROXY CIDR form as a textual hostname suffix instead of evaluating the network range. A request targets an address covered by a CIDR entry in NO_PROXY while a proxy is configured. The CIDR bypass rule is not matched, so the request is sent through the configured proxy. For plaintext HTTP, the proxy can observe and modify URLs, headers, and bodies; for HTTPS, it can observe connection metadata and CONNECT requests. This issue is fixed in version 1.20.0. | 16 Oct |
| CVE-2026-92415 | 6.9 medium | 1.0% | apache, jackrabbit | — Use of Externally-Controlled Input to Select Classes or Code vulnerability in Apache Jackrabbit's WebDAV/Davex client. A malicious WebDAV/DavEx server, or an attacker able to intercept the connection, can cause the client to instantiate arbitrary classes from its classpath, which can lead to arbitrary file creation or truncation. Only applications that use jackrabbit-spi2dav (directly or through jackrabbit-jcr2dav) to connect to a remote repository are affected. Jackrabbit servers are not affected. Category: unsafe reflection on wire data (HIGH). This issue affects Apache Jackrabbit: from 2.23.0 through 2.23.5, from 2.22.0 through 2.22.4, from 2.20.0 through 2.20.17. Users are recommended to upgrade to versions 2.23.6, 2.22.5, or 2.20.18 which fix the issue. | 13 Oct |
| CVE-2025-34254 | 6.9 medium | 1.0% | dlink, nuclias_connect | D-Link Nuclias Connect firmware versions <= 1.3.1.4 contain an observable response discrepancy vulnerability. The application's 'Login' endpoint returns distinct JSON responses depending on whether the supplied username is associated with an existing account. Because the responses differ in the `error.message`string value, an unauthenticated remote attacker can enumerate valid usernames/accounts on the server. NOTE: D-Link states that a fix is under development. | 9 Oct |
| CVE-2025-34255 | 6.9 medium | 1.0% | dlink, nuclias_connect | D-Link Nuclias Connect firmware versions <= 1.3.1.4 contain an observable response discrepancy vulnerability. The application's 'Forgot Password' endpoint returns distinct JSON responses depending on whether the supplied email address is associated with an existing account. Because the responses differ in the `data.exist` boolean value, an unauthenticated remote attacker can enumerate valid email addresses/accounts on the server. NOTE: D-Link states that a fix is under development. | 9 Oct |
| CVE-2025-55139 | 6.8 medium | 1.0% | ivanti, connect_secure, policy_secure, zero_trust_access_gateway | SSRF in Ivanti Connect Secure before 22.7R2.9 or 22.8R2, Ivanti Policy Secure before 22.7R1.6, Ivanti ZTA Gateway before 2.8R2.3-723 and Ivanti Neurons for Secure Access before 22.8R1.4 (Fix deployed on 02-Aug-2025) allows a remote authenticated attacker with admin privileges to enumerate internal services. | 18 Oct |
| CVE-2026-44170 | 6.3 medium | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, MariaDB on WIndows with installed CONNECT engine and enabled REST support interpolated table HTTP attribute into the curl command line without proper sanitizing. This allows the user to execute shell commands on the server. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. | Mon 26 Oct |
| CVE-2026-63335 | 6.3 medium | 1.0% | no CPE yet | The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.31.0, inbound AMQP command assembly in src/main/java/com/rabbitmq/client/impl/CommandAssembler.java processes a content-bearing method and header whose remainingBodyBytes value is smaller than a following AMQP.FRAME_BODY payload. CommandAssembler.consumeBodyFrame subtracts the peer-controlled payload length before validating that it fits, drives remainingBodyBytes negative, and throws a raw UnsupportedOperationException instead of MalformedFrameException. A malicious or compromised broker peer can send this malformed sequence on an open nonzero channel to terminate frame processing and close the client connection, causing denial of service for work using that connection. This issue is fixed in version 5.31.0. | 22 Oct |
| CVE-2026-12283 | 6.1 medium | 1.0% | no CPE yet | Amazon Athena is a serverless, interactive query service that lets you analyze data directly in Amazon S3 using standard SQL. Athena Query Federation is a feature that allows you to connect to data sources outside of Amazon S3 like DynamoDB, Azure Synapse, and custom connectors using standard SQL syntax. Improper neutralization of special elements used in an SQL command in the Synapse connector in Amazon aws-athena-query-federation v2022.20.1 through v2026.19.1 might allow an authenticated remote user to execute injected read-only SQL queries that return unintended data from the connected database via a crafted table name. To remediate this issue, users should upgrade to version v2026.21.1 or later. | Sat 24 Oct |
Download these 651 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.