Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-59247 | 7.6 high | 0.00% | no CPE yet | Insufficient Verification of Data Authenticity vulnerability in Gleam allows an adversary in the middle to substitute forged Hex package contents during dependency resolution. During dependency resolution Gleam fetches package metadata from the signature-verified Hex repository, which covers each release's dependency requirements and SHA-256 outer_checksum. After resolving versions, gleam_cli::dependencies::lookup_package makes a second request to the unsigned Hex API through gleam_core::hex::get_package_release and records the outer_checksum and dependency names from that JSON response into manifest.toml, instead of the values from the verified repository metadata. The Hex repository signature does not cover the API response. An adversary in the middle who can intercept TLS with a certificate trusted by the Gleam process (for example a TLS-inspecting proxy using a CA in the operating system trust store or added through GLEAM_CACERTS_PATH), and who can modify both the API release response and the corresponding repository tarball, can supply a package archive with a matching forged checksum without the Hex repository signing key. Gleam verifies the forged tarball against the forged checksum, accepts it, and extracts it as a dependency source, resulting in loss of integrity of the downloaded package contents. Only projects that resolve or update Hex dependencies are affected, which happens when the manifest is missing, a dependency is added or updated, or dependency requirements change. Builds that reuse an unchanged, known-good manifest.toml continue to verify tarballs against its pinned checksum. This issue affects gleam: from 0.18.0 before 1.18.0. | 23 Oct |
| CVE-2026-24451 | 7.5 high | 0.00% | no CPE yet | Gitea 1.26.2 allows fork synchronization to continue after a parent repository changes from public to private, exposing data to a fork that should no longer be authorized. | 25 Oct |
| CVE-2026-32807 | 7.5 high | 0.00% | no CPE yet | dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, anyone with a DataLink UUID can fetch the attached text file directly, even if the link is expired, the caller is unauthenticated, or the normal show flow would have denied access. Because the route is public and the mailer embeds the direct file URL, any leaked, forwarded, logged, or stale email link can continue to expose the attachment. | 24 Oct |
| CVE-2026-98173 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of iface in cifs_try_adding_channels() cifs_try_adding_channels() iterates ses->iface_list with list_for_each_entry_safe_from(), which captures the next entry (niface) under iface_lock. The loop body then drops iface_lock for the whole duration of cifs_ses_add_channel(). A concurrent interface refresh (SMB3_request_interfaces() -> parse_server_interfaces()) marks all ifaces inactive and removes and frees any that are not re-advertised via list_del() + kref_put(), where release_iface() is a bare kfree(). Since niface typically has no channel holding a reference, the list reference is its last and it can be freed inside the unlocked window. On continue, the iterator advance step then dereferences niface->iface_head.next, and the loop body reads iface->rdma_capable/is_active, both on freed memory. Fix this by never keeping an unreferenced list pointer across the unlocked window. Each channel attempt now re-scans the list from the head under iface_lock, takes a kref on the selected candidate, and passes only that referenced candidate to cifs_ses_add_channel(). weight_fulfilled still tracks selection progress, so restarting the scan preserves the original weighted distribution and the weight_fulfilled-before-kref_put ordering on the failure path. Add a per-pass attempts cap so a flapping interface refresh cannot keep the inner loop spinning within a single tries increment. | 21 Oct |
| CVE-2026-110758 | 7.5 high | 0.00% | no CPE yet | Text::CSV_XS versions before 1.65 for Perl read before the start of an all-blank field under allow_whitespace in strip_trail_whitespace. Under allow_whitespace, strip_trail_whitespace removes trailing spaces and tabs from each unquoted field without stopping at the start of the field. For a field of only blanks it reads the byte before the field's heap buffer. If that byte is also a space or tab, it may be zeroed and the walk continue backwards, depending on what the allocator placed there. Leading blanks are normally skipped before a field is stored, but an all-blank field still arrives after a leading escape_char that differs from quote_char, or as a quoted field in getline when its line ends in two CRs. | 20 Oct |
| CVE-2026-73260 | 7.5 high | 0.00% | no CPE yet | Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TLS certificate parser selected by MG_TLS_BUILTIN fails to verify that a long-form DER element length fits within the remaining certificate buffer. In mg_der_to_tlv() and mg_der_next(), a peer-controlled length can advance the parser beyond the certificate and underflow the remaining uint32_t length, causing mg_tls_parse_cert_der() to continue walking an invalid pointer. An unauthenticated malicious TLS server, or a client presenting a certificate to a server configured for client certificates, can trigger an out-of-bounds read and denial of service during the handshake. This issue is fixed in version 7.23. | 20 Oct |
| CVE-2026-64374 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. | 19 Oct |
| CVE-2026-74692 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_wq for the CLC handshake continue running unguarded. smc_accept_enqueue() takes a sock_hold() on the child that is never released, so the child smc_sock, its clcsock, and the reference all leak. A remote peer that opens TCP connections while the server calls close() can exhaust kernel memory. Move lock_sock_nested() to before the sk_state check so that the test and the enqueue are atomic under the listener lock. | 16 Oct |
| CVE-2026-100409 | 7.5 high | 0.00% | no CPE yet | OpenNext Cloudflare is an open Next.js adapter for Cloudflare. From 0.3.0 until 1.20.2, applications that enable enableCacheInterception, rely on middleware for access control, and have a matching cached protected route process encoded pathnames inconsistently between middleware matching and cache lookup. An unauthenticated attacker can use a percent-encoded pathname that does not match authorization middleware but decodes to the cache key of a protected route, causing cached content to be returned without authorization. Malformed encodings can also be partially decoded, allowing cache lookup to continue with a pathname that middleware did not evaluate consistently. This issue is fixed in version 1.20.2. | 16 Oct |
| CVE-2026-6647 | 7.4 high | 0.00% | no CPE yet | In deployments of WSO2 Identity Server configured with a case-insensitive user store and a case-sensitive database for identity data, mismatches in username case handling can occur. This inconsistency results in OAuth token revocation operations failing to correctly identify usernames containing mixed-case characters during certain lifecycle events, preventing tokens from being invalidated. A malicious actor can exploit this vulnerability by possessing a valid access or refresh token associated with a mixed-case username. In affected configurations, these tokens may not be revoked when expected. The actor can then leverage these unrevoked tokens, before their expiry, to continue performing actions that should have been restricted, effectively bypassing intended access controls. | Wed 28 Oct |
| CVE-2026-44511 | 7.4 high | 0.00% | no CPE yet | Katalyst Koi is a framework for building Rails admin functionality. Prior to 4.20.0 and 5.6.0, admin session cookies were not invalidated when an admin user logged out. An attacker with access to a valid admin session cookie could continue to access admin functionality after logout, until the cookie expired or session secrets were rotated. This vulnerability is fixed in 4.20.0 and 5.6.0. | 26 Oct |
| CVE-2026-80578 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fbdev: core: Fix pointer desynchronization in fb_io_read() In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to a faulty user buffer), the loop adjusts the chunk size 'c' and updates the remaining 'count'. However, the hardware 'src' pointer has already been eagerly advanced by the original chunk size. If the loop is allowed to continue, the read will resume from an incorrect, over-advanced offset. Since the remaining 'count' was only decremented by the successful bytes, this desynchronization causes the next iterations to execute more hardware reads than originally bounded, eventually leading to out-of-bounds I/O reads. Fix this by breaking out of the loop immediately upon a partial copy_to_user(). A partial copy indicates a faulty user buffer, making subsequent read attempts futile. Breaking out ensures we return the number of successfully read bytes without risking out-of-bounds hardware accesses in subsequent mismatched iterations. | 16 Oct |
| CVE-2026-93112 | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Require a BPF cpumask for bpf_cpumask_populate() bpf_cpumask_populate() writes to its destination with bitmap_copy(), but the destination is typed as struct cpumask *. That allows the verifier to accept borrowed cpumask pointers returned by read-only kfuncs, such as scx_bpf_get_online_cpumask(), as a writable destination. Make the destination a struct bpf_cpumask * so populate follows the same ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue to accept const struct cpumask * inputs. | 19 Oct |
| CVE-2026-90401 | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support. | 19 Oct |
| CVE-2026-74507 | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | 16 Oct |
| CVE-2026-104875 | 7.1 high | 0.00% | no CPE yet | Ente provides end-to-end encrypted cloud services and security tools. Prior to server image 2026.07.09, the POST /emergency-contacts/approve-recovery endpoint authorized approval using a client-supplied userID and updated an emergency recovery session using only its client-supplied recovery-session UUID. An accepted emergency contact could submit the contact's own identifier, transition the victim's session from WAITING to READY, clear wait_till, retrieve recovery information, and continue account recovery before the owner-configured notice period expired. Exploitation of the approval bypass required the victim to have previously added and accepted the attacker as an emergency contact, and it did not create recovery rights for an arbitrary account. Separately, the same insufficiently scoped update pattern affected the reject and stop recovery transitions, allowing a user who knew another recovery-session UUID to potentially cancel a session to which the user was not a party. This issue is fixed in server image 2026.07.09. | 16 Oct |
| CVE-2025-55702 | 7.0 high | 0.00% | no CPE yet | When a client sends a POST with Expect: 100-continue and the origin answers before reading the body, Apache Traffic Server parses the unread body left on the client connection as the next request. An attacker behind a front-end proxy that shares connections to Traffic Server can use this to smuggle requests past the front end and desynchronize responses for other users. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. | Wed 28 Oct |
| CVE-2025-21702 | 7.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: pfifo_tail_enqueue: Drop new packet when sch->limit == 0 Expected behaviour: In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a packet in scheduler's queue and decrease scheduler's qlen by one. Then, pfifo_tail_enqueue() enqueue new packet and increase scheduler's qlen by one. Finally, pfifo_tail_enqueue() return `NET_XMIT_CN` status code. Weird behaviour: In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a scheduler that has no packet, the 'drop a packet' step will do nothing. This means the scheduler's qlen still has value equal 0. Then, we continue to enqueue new packet and increase scheduler's qlen by one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by one and return `NET_XMIT_CN` status code. The problem is: Let's say we have two qdiscs: Qdisc_A and Qdisc_B. - Qdisc_A's type must have '->graft()' function to create parent/child relationship. Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`. - Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`. - Qdisc_B is configured to have `sch->limit == 0`. - Qdisc_A is configured to route the enqueued's packet to Qdisc_B. Enqueue packet through Qdisc_A will lead to: - hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B) - Qdisc_B->q.qlen += 1 - pfifo_tail_enqueue() return `NET_XMIT_CN` - hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A. The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1. Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem. This violate the design where parent's qlen should equal to the sum of its childrens'qlen. Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable. | 15 Oct |
| CVE-2026-25720 | 6.9 medium | 0.00% | senselive, x3500_firmware | A vulnerability exists in SenseLive X3050’s web management interface due to improper session lifetime enforcement, allowing authenticated sessions to remain active for extended periods without requiring re-authentication. An attacker with access to a previously authenticated session could continue interacting with administrative functions long after legitimate user activity has ceased. | Mon 26 Oct |
| CVE-2026-14227 | 6.9 medium | 0.00% | no CPE yet | An API session‑management flaw in products with the MikroTik RouterOS API enabled are vulnerable to a Insufficient Session Expiration vulnerability. This could allow active sessions to retain their previous permission set after inactivity timeouts or user‑group changes. As a result, an authenticated user whose permissions have been reduced may continue accessing information. | 23 Oct |
| CVE-2026-87110 | 6.9 medium | 0.00% | mongodb, ops_manager | An unauthenticated user with network access to the Ops Manager web port can repeatedly request monitoring endpoints that perform costly work without rate limiting. This can temporarily slow other traffic served by the same process while requests continue. | 15 Oct |
| CVE-2025-13524 | 6.8 medium | 0.00% | no CPE yet | Improper resource release in the call termination process in AWS Wickr before version 6.62.13 on Windows, macOS and Linux may allow a call participant to continue receiving audio input from another user after they close their call window. This issue occurs under certain conditions, which require the affected user to take a particular action within the application To mitigate this issue, users should upgrade AWS Wickr, Wickr Gov and Wickr Enterprise desktop version to version 6.62.13. | 18 Oct |
| CVE-2026-54462 | 6.5 medium | 0.00% | no CPE yet | Knative pkg provides common packages shared across Knative repositories. Prior to 0.0.0-20260531000007-52dbd5ece63f, the knative.dev/pkg/webhook admissionHandler in webhook/admission.go decodes an attacker-supplied AdmissionReview through json.NewDecoder(io.TeeReader(r.Body, &bodyBuffer)) under an http.HandlerFunc without an http.MaxBytesReader or equivalent body-size limit. A pod-network client can send one oversized POST to an admission webhook, causing the decoder and bodyBuffer to retain amplified copies of the request until the controller pod exhausts memory and is OOM-killed. Every downstream consumer using the shared webhook server inherits the vulnerable behavior, including Knative, Tekton, KEDA, Sigstore policy-controller, and Kpack. For consumers configured with failurePolicy=Fail, loss of the controller can interrupt admission; with failurePolicy=Ignore, the affected webhook is unavailable while other admissions continue. This issue is fixed in version 0.0.0-20260531000007-52dbd5ece63f. | Wed 28 Oct |
| CVE-2026-35594 | 6.5 medium | 0.00% | vikunja | Vikunja is an open-source self-hosted task management platform. Prior to 2.3.0, Vikunja's link share authentication (GetLinkShareFromClaims in pkg/models/link_sharing.go) constructs authorization objects entirely from JWT claims without any server-side database validation. When a project owner deletes a link share or downgrades its permissions, all previously issued JWTs continue to grant the original permission level for up to 72 hours (the default service.jwtttl). This vulnerability is fixed in 2.3.0. | Mon 26 Oct |
| CVE-2026-107581 | 6.5 medium | 0.00% | no CPE yet | Progressive Robot hMailServer 6.0.0 through 6.3.5 processes several IMAP commands from a signed-in account in time quadratic in the command's length or in the number of elements it names, and can be made to hold memory out of proportion to a command. The FETCH data-item parser normalised a BODY[] section with a case-insensitive string replacement that copied the whole item per occurrence and split the item list by repeatedly copying the remainder of the command; the server's case-insensitive search compared a needle afresh at every position, so a long SEARCH TEXT key over a message cost the product of the two lengths; SEARCH message sets and the saved-result marker ($), SORT criteria, HEADER.FIELDS name lists and UID ranges were each read once per message rather than once per command; and a FETCH naming a message's sections very many times read and held every section in memory before sending any. An IMAP command may continue past one line through non-synchronizing literals, so one command can reach about eleven megabytes. The IMAP worker threads are a small pool shared with SMTP and POP3, so a signed-in user sending such commands can make the IMAP, SMTP and POP3 services stop responding (CWE-407) and can consume excessive memory (CWE-400). | 8 Oct |
| CVE-2026-93293 | 6.4 medium | 0.00% | saadiqbal, password protected – protect your site content with a password | The Password Protected plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the bundled Freemius SDK's purchase-completion handler in all versions up to, and including, 2.8.4 due to insufficient input sanitization and output escaping. Once the site's Freemius opt-in is complete (the normal state after an administrator clicks "Allow & Continue"), the handler processes the 'purchased_plan' request parameter on any wp-admin request from an authenticated user without any capability, nonce, or purchase validation, and stores it in a persistent, site-wide administrative notice. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts that execute automatically when an administrator views a standard admin page such as their Profile page. | Thu 29 Oct |
| CVE-2026-118773 | 6.3 medium | 0.00% | isaacs, node-glob | Glob matches files using patterns the shell uses. From 9.0.0 until 14.0.2, abort branches in src/walker.ts, including GlobUtil.walkCB(), GlobUtil.walkCB2(), GlobUtil.walkCBSync(), and GlobUtil.walkCB2Sync(), invoke the callbacks without returning. After AbortSignal or AbortSignal.timeout() rejects or emits an error, execution can continue into processor.processPatterns(), readdirCB(), and recursive traversal. The issue affects glob() and globStream() when applications expose attacker-influenced patterns or directory trees and rely on cancellation as a traversal budget. Repeated timed-out requests can stack background filesystem operations and CPU work, degrading worker throughput or service availability; no confidentiality or integrity impact was observed. This issue is fixed in 14.0.2. | Fri 30 Oct |
| CVE-2026-66883 | 6.3 medium | 0.00% | no CPE yet | Improper Handling of Case Sensitivity vulnerability in Erlang Ecosystem Foundation oidcc_plug (Oidcc.Plug.Authorize module) renders the user agent session binding inert, removing a defense in depth control against replay of a stolen session. This vulnerability is associated with program files lib/oidcc/plug/authorize.ex and lib/oidcc/plug/authorization_callback.ex, and program routines Oidcc.Plug.Authorize.call/2 and Oidcc.Plug.AuthorizationCallback.call/2. Oidcc.Plug.Authorize.call/2 reads the initiating client's user agent with get_req_header(conn, "User-Agent"). Plug lowercases incoming header names, but get_req_header/2 matches the supplied key exactly and performs no normalization of its own, so the mixed-case lookup always returns an empty list and nil is written into the session. On the callback side, Oidcc.Plug.AuthorizationCallback treats a stored nil user agent as nothing to compare and returns :ok without inspecting the request. The two behaviours combine so that the check passes unconditionally on every request, including for deployments that explicitly opted in with check_useragent: true, and an authorization callback can be completed from a different user agent than the one that initiated the flow without detection. The check fails open silently, with no error and no log entry, so a deployment cannot tell the binding is absent. The impact is limited to defense in depth. The inert check does not by itself allow an attacker to complete an authorization flow; it removes one layer that would otherwise hinder use of a stolen or leaked session, such as an exfiltrated session cookie replayed from a different client. The CSRF/state, nonce, and PKCE checks are unaffected and continue to function. Deployments that never enabled check_useragent are not affected in practice, since they never expected the binding. The corresponding lookup in Oidcc.Plug.AuthorizationCallback correctly uses the lowercase key and is not affected. This issue affects oidcc_plug: from 0.1.0-alpha.3 before 0.5.0. | 23 Oct |
| CVE-2026-47721 | 6.3 medium | 0.00% | no CPE yet | FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.2, POST /api/scheduler and DELETE /api/scheduler in server/api/scheduler/index.js do not consistently enforce authJwt.haveAdminPermission for scheduler settings. An authenticated non-admin operator can create or alter deviceActions that invoke onSetValue or onRunScript, or delete schedules, gaining access to device-value changes and server-side project script execution normally reserved for administrators. Scheduled and repeating actions can continue changing PLC setpoints, safety interlocks, device state, or project data after the operator's session ends. This issue is fixed in version 1.3.2. | 22 Oct |
| CVE-2025-11935 | 6.3 medium | 0.00% | wolfssl | With TLS 1.3 pre-shared key (PSK) a malicious or faulty server could ignore the request for PFS (perfect forward secrecy) and the client would continue on with the connection using PSK without PFS. This happened when a server responded to a ClientHello containing psk_dhe_ke without a key_share extension. The re-use of an authenticated PSK connection that on the clients side unexpectedly did not have PFS, reduces the security of the connection. | 19 Oct |
| CVE-2026-119138 | 5.9 medium | 0.00% | bytecodealliance, wasmtime | Wasmtime 46.0.0 before 48.0.6 and 49.0.0 before 49.0.3 contains a denial of service vulnerability that allows pending calls to trigger an assertion failure after a trap poisons the Store. Attackers supplying misbehaving guest code can cause a trap and let earlier calls proceed, crashing embedders that continue using the inconsistent Store. | Thu 29 Oct |
| CVE-2026-96806 | 5.8 medium | 0.00% | no CPE yet | The Apache Airflow Keycloak auth manager did not end the session on logout: the logout route revoked the presented token, but `KeycloakJWTMiddleware` then issued a new, unrevoked token on the same response, so the user stayed logged in. Deployments using the Keycloak auth manager are affected: after a user logs out, anyone with later access to the same browser (for example on a shared workstation) can continue to act as that user. Users of apache-airflow-providers-keycloak are recommended to upgrade to apache-airflow-providers-keycloak 0.11.1 or later. | 16 Oct |
| CVE-2026-98114 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated. | Wed 28 Oct |
| CVE-2026-7788 | 5.5 medium | 0.00% | no CPE yet | A security flaw has been discovered in Axle-Bucamp MCP-Docusaurus up to 404bc028e15ec304c9a045528560f4b5f27a17e0. The affected element is the function update_document/continue_document/delete_document/get_content of the file app/routes/document.py. Performing a manipulation of the argument DOCS_DIR/path results in path traversal. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. | Mon 26 Oct |
| CVE-2026-64307 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded | 24 Oct |
| CVE-2026-53123 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: md: wake raid456 reshape waiters before suspend During raid456 reshape, direct IO across the reshape position can sleep in raid5_make_request() waiting for reshape progress while still holding an active_io reference. If userspace then freezes reshape and writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io and waits for all in-flight IO to drain. This can deadlock: the IO needs reshape progress to continue, but the reshape thread is already frozen, so the active_io reference is never dropped and suspend never completes. raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do the same for normal md suspend when reshape is already interrupted, so waiting raid456 IO can abort, drop its reference, and let suspend finish. The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. | 21 Oct |
| CVE-2026-46032 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit() returns an error code that is ignored by most callers, and continues to run L1 with corrupted state. A sane recovery is not possible in this case, and HW behavior is to cause a shutdown. Inject a triple fault instead, and do not return early from nested_svm_vmexit(). Continue cleaning up the vCPU state (e.g. clear pending exceptions), to handle the failure as gracefully as possible. From the APM: Upon #VMEXIT, the processor performs the following actions in order to return to the host execution context: ... if (illegal host state loaded, or exception while loading host state) shutdown else execute first host instruction following the VMRUN Remove the return value of nested_svm_vmexit(), which is mostly unchecked anyway. | 21 Oct |
| CVE-2025-38140 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target. | 21 Oct |
| CVE-2025-38064 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: virtio: break and reset virtio devices on device_shutdown() Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory accesses during the hang. Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected ... It was traced down to virtio-console. Kexec works fine if virtio-console is not in use. The issue is that virtio-console continues to write to the MMIO even after underlying virtio-pci device is reset. Additionally, Eric noticed that IOMMUs are reset before devices, if devices are not reset on shutdown they continue to poke at guest memory and get errors from the IOMMU. Some devices get wedged then. The problem can be solved by breaking all virtio devices on virtio bus shutdown, then resetting them. | 21 Oct |
| CVE-2025-39923 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/[email protected]/ [2]: https://lore.kernel.org/r/[email protected]/ | 19 Oct |
| CVE-2025-39956 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: igc: don't fail igc_probe() on LED setup error When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: <TASK> igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind | 19 Oct |
| CVE-2025-38720 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix rtnl deadlock issue Currently, the hibmcge netdev acquires the rtnl_lock in pci_error_handlers.reset_prepare() and releases it in pci_error_handlers.reset_done(). However, in the PCI framework: pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked - pci_dev_save_and_disable - err_handler->reset_prepare(dev); In pci_slot_save_and_disable_locked(): list_for_each_entry(dev, &slot->bus->devices, bus_list) { if (!dev->slot || dev->slot!= slot) continue; pci_dev_save_and_disable(dev); if (dev->subordinate) pci_bus_save_and_disable_locked(dev->subordinate); } This will iterate through all devices under the current bus and execute err_handler->reset_prepare(), causing two devices of the hibmcge driver to sequentially request the rtnl_lock, leading to a deadlock. Since the driver now executes netif_device_detach() before the reset process, it will not concurrently with other netdev APIs, so there is no need to hold the rtnl_lock now. Therefore, this patch removes the rtnl_lock during the reset process and adjusts the position of HBG_NIC_STATE_RESETTING to ensure that multiple resets are not executed concurrently. | 19 Oct |
| CVE-2025-39768 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix complex rules rehash error flow Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This patch fixes the error flow for moving complex rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch. | 19 Oct |
| CVE-2025-39925 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label] | 19 Oct |
| CVE-2026-23198 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated--- | 19 Oct |
| CVE-2025-71104 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer When advancing the target expiration for the guest's APIC timer in periodic mode, set the expiration to "now" if the target expiration is in the past (similar to what is done in update_target_expiration()). Blindly adding the period to the previous target expiration can result in KVM generating a practically unbounded number of hrtimer IRQs due to programming an expired timer over and over. In extreme scenarios, e.g. if userspace pauses/suspends a VM for an extended duration, this can even cause hard lockups in the host. Currently, the bug only affects Intel CPUs when using the hypervisor timer (HV timer), a.k.a. the VMX preemption timer. Unlike the software timer, a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the HV timer only runs while the guest is active. As a result, if the vCPU does not run for an extended duration, there will be a huge gap between the target expiration and the current time the vCPU resumes running. Because the target expiration is incremented by only one period on each timer expiration, this leads to a series of timer expirations occurring rapidly after the vCPU/VM resumes. More critically, when the vCPU first triggers a periodic HV timer expiration after resuming, advancing the expiration by only one period will result in a target expiration in the past. As a result, the delta may be calculated as a negative value. When the delta is converted into an absolute value (tscdeadline is an unsigned u64), the resulting value can overflow what the HV timer is capable of programming. I.e. the large value will exceed the VMX Preemption Timer's maximum bit width of cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the HV timer to the software timer (hrtimers). After switching to the software timer, periodic timer expiration callbacks may be executed consecutively within a single clock interrupt handler, because hrtimers honors KVM's request for an expiration in the past and immediately re-invokes KVM's callback after reprogramming. And because the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer over and over until the target expiration is advanced to "now" can result in a hard lockup. E.g. the following hard lockup was triggered in the host when running a Windows VM (only relevant because it used the APIC timer in periodic mode) after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: <IRQ> apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> Moreover, if the suspend duration of the virtual machine is not long enough to trigger a hard lockup in this scenario, since commit 98c25ead5eda ("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM will continue using the software timer until the guest reprograms the APIC timer in some way. Since the periodic timer does not require frequent APIC timer register programming, the guest may continue to use the software timer in ---truncated--- | 19 Oct |
| CVE-2025-21899 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated. | 15 Oct |
| CVE-2026-52965 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure When ttm_tt_swapout() fails, the current code calls ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail() to restore the resource's bulk_move membership. However, ttm_resource_move_to_lru_tail() places the resource at the tail of the LRU list which, relative to the walk cursor's hitch node (placed immediately after the resource when it was yielded), puts the resource *in front of the* the hitch. The next list_for_each_entry_continue() from the hitch finds the same resource again, causing an infinite loop. Fix by deferring del_bulk_move to the success path only. On the success path, TTM_TT_FLAG_SWAPPED has just been set by ttm_tt_swapout() but the resource is still tracked in the bulk_move range, so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would incorrectly skip the removal. Introduce ttm_resource_del_bulk_move_unevictable() which bypasses that guard. | 15 Oct |
| CVE-2026-64425 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items can still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue running after exit has begun. Move the check further inside, so it covers linked items too. Note: this is a syzbot special as it loves setting up tons of slow linked work on weird devices like msr that take forever to read, and immediately close the ring. Exit then takes a long time. | 15 Oct |
| CVE-2026-53080 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: <TASK> tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 </TASK> irq event stamp: 1045778 hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated--- | 15 Oct |
Download these 221 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.