Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-72005 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. | 19 Oct |
| CVE-2026-68257 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | 19 Oct |
| CVE-2026-64556 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: perf/core: Detach event groups during remove_on_exec perf_event_remove_on_exec() removes events by calling perf_event_exit_event(). For top-level events, this removes the event from the context with DETACH_EXIT only. This can leave inconsistent group state when a removed event is a group leader and the group contains siblings without remove_on_exec. If the group was active, the surviving siblings can remain active and attached to the removed leader's sibling list, but are no longer represented by a valid group leader on the PMU context active lists. A later close of the removed leader uses DETACH_GROUP and can promote the still-active siblings from this stale group state. The next schedule-in can then add an already-linked active_list entry again, corrupting the PMU context active list. With DEBUG_LIST enabled, this is caught as a list_add double-add in merge_sched_in(). Fix this by detaching group relationships when remove_on_exec removes an event. This preserves the existing task-exit and revoke behavior, while ensuring surviving siblings are ungrouped before the removed event leaves the context. | 19 Oct |
| CVE-2026-45878 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). | 19 Oct |
| CVE-2026-43214 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2() Add SRCU read-side protection when reading PDPTR registers in __get_sregs2(). Reading PDPTRs may trigger access to guest memory: kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() -> kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot() kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(), which uses srcu_dereference_check() and requires either kvm->srcu or kvm->slots_lock to be held. Currently only vcpu->mutex is held, triggering lockdep warning: ============================= WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot 6.12.59+ #3 Not tainted include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.5.1717/15100: #0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824 __kvm_memslots include/linux/kvm_host.h:1062 [inline] __kvm_memslots include/linux/kvm_host.h:1059 [inline] kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline] kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617 kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302 load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065 svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688 kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline] __get_sregs2 arch/x86/kvm/x86.c:11784 [inline] kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279 kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | 19 Oct |
| CVE-2026-31648 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | 19 Oct |
| CVE-2026-31586 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) cgwb_release_workfn (mm/backing-dev.c:629) process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385) Freed by task 1016: kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561) css_free_rwork_fn (kernel/cgroup/cgroup.c:5542) process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385) ** Stack based on commit 66672af7a095 ("Add linux-next specific files for 20260410") I am seeing this crash sporadically in Meta fleet across multiple kernel versions. A full reproducer is available at: https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh (The race window is narrow. To make it easily reproducible, inject a msleep(100) between css_put() and blkcg_unpin_online() in cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the reproducer triggers the splat reliably in less than a second.) Fix this by moving blkcg_unpin_online() before css_put(), so the cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online() accesses it. | 19 Oct |
| CVE-2026-23458 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: <TASK> ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0 | 19 Oct |
| CVE-2025-71091 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: team: fix check for port enabled in team_queue_override_port_prio_changed() There has been a syzkaller bug reported recently with the following trace: list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:59! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59 Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d49f370 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000 RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005 RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230 R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480 FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653 genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2630 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2684 __sys_sendmsg+0x16d/0x220 net/socket.c:2716 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The problem is in this flow: 1) Port is enabled, queue_id != 0, in qom_list 2) Port gets disabled -> team_port_disable() -> team_queue_override_port_del() -> del (removed from list) 3) Port is disabled, queue_id != 0, not in any list 4) Priority changes -> team_queue_override_port_prio_changed() -> checks: port disabled && queue_id != 0 -> calls del - hits the BUG as it is removed already To fix this, change the check in team_queue_override_port_prio_changed() so it returns early if port is not enabled. | 19 Oct |
| CVE-2025-68815 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Remove drr class from the active list if it changes to strict Whenever a user issues an ets qdisc change command, transforming a drr class into a strict one, the ets code isn't checking whether that class was in the active list and removing it. This means that, if a user changes a strict class (which was in the active list) back to a drr one, that class will be added twice to the active list [1]. Doing so with the following commands: tc qdisc add dev lo root handle 1: ets bands 2 strict 1 tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1s tc filter add dev lo parent 1: basic classid 1:2 ping -c1 -W0.01 -s 56 127.0.0.1 tc qdisc change dev lo root handle 1: ets bands 2 strict 2 tc qdisc change dev lo root handle 1: ets bands 2 strict 1 ping -c1 -W0.01 -s 56 127.0.0.1 Will trigger the following splat with list debug turned on: [ 59.279014][ T365] ------------[ cut here ]------------ [ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0. [ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220 [ 59.280860][ T365] Modules linked in: [ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary) [ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220 [ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44 ... [ 59.288812][ T365] Call Trace: [ 59.289056][ T365] <TASK> [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80 [ 59.289891][ T365] ? __lock_acquire+0x7e7/0x1be0 [ 59.290223][ T365] ? __pfx_ets_qdisc_change+0x10/0x10 [ 59.290546][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.290898][ T365] ? __mutex_trylock_common+0xda/0x240 [ 59.291228][ T365] ? __pfx___mutex_trylock_common+0x10/0x10 [ 59.291655][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.291993][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.292313][ T365] ? trace_contention_end+0xc8/0x110 [ 59.292656][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293022][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293351][ T365] tc_modify_qdisc+0x63a/0x1cf0 Fix this by always checking and removing an ets class from the active list when changing it to strict. [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/tree/net/sched/sch_ets.c?id=ce052b9402e461a9aded599f5b47e76bc727f7de#n663 | 19 Oct |
| CVE-2026-98254 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does. | 19 Oct |
| CVE-2026-98023 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vxlan: reject dynamic fdb entries that reference a nexthop id The commit cited in the Fixes tag allowed VXLAN FDB entries to point to FDB nexthops so that overlay traffic could be load balanced across multiple VTEPs. Such entries can only be configured from user space, cannot be learned and cannot roam. They only make sense with a user space control plane such as E-VPN where data plane learning is disabled. Despite that, the VXLAN driver does not currently prevent such entries from being configured with the "dynamic" flag. The per-nexthop FDB list is only protected by the per-device hash lock, which is not sufficient when two VXLAN devices point to the same FDB nexthop and therefore share the list. Aging runs in softirq context without RTNL, so an entry deleted by one device can race with an addition or deletion from the other, leading to list corruption: list_del corruption. next->prev should be ffff8881069d9548, but was dead000000000122. (next=ffff8881069d9448) WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65 __list_del_entry_valid_or_report+0x1aa/0x210 ... vxlan_fdb_destroy+0x5b8/0xad0 vxlan_cleanup+0x328/0x450 call_timer_fn+0x2a/0x1c0 run_timer_softirq+0x18c/0x210 BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy Fix this by rejecting the bogus configuration of dynamic FDB entries that point to FDB nexthops, both when created and when an existing entry is updated. As such, the per-nexthop FDB list is only ever mutated under the RTNL lock. Add test cases to make sure that this does not regress in the future. | 19 Oct |
| CVE-2026-90047 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't hand out the flat CCS storage as usable VRAM get_flat_ccs_offset() reads the base of the flat CCS storage from the hardware, scales it by the number of enabled L3 nodes, and rounds the result up to 128K. Everything below that offset is then handed to the VRAM allocator as usable memory. Rounding a limit that means "usable memory ends here" upwards publishes whatever lies between the real base and the rounded one as free memory, and that memory belongs to the compression hardware. The scaled value has no reason to be 128K aligned, and on a Battlemage G21 with 16 GiB it is not: flat CCS base: raw 0x3fafff800, rounded 0x3fb000000 so the last 2 KiB of page 0x3fafff000 is CCS storage, in the allocator's pool. Whatever is allocated there gets that tail overwritten by the compression hardware, which needs no page-table entry, no buffer object and no GPU submission to do it, and does it before userspace exists. On this machine a Mesa VM's level-3 page table landed on that page on every cold boot. It lost the entry covering the compositor's batch-buffer heap, so the compositor's first submission faulted fetching its batch and gdm restarted it forever: a black screen on an otherwise working machine. Restarting gdm cleared it because the next VM's page tables were allocated somewhere else. Round down instead, to the page size the allocator works in. On this machine that excludes exactly one page. Reading the reserved page afterwards shows what had been writing it: [369] 0xcccc000000000000 [371] 0xcc77000000000000 [373] 0xcccc000000000000 [375] 0xcc77000000000000 compression metadata, two bytes per sixteen, sitting where the driver used to hand out memory. The assertion that should have caught this compares the offset against GSMBASE - ccs_size for equality. That value is 128K aligned, so it agrees with the rounded-up offset precisely when the base is not aligned - the check cannot fail in the case it exists to catch, and is compiled out unless CONFIG_DRM_XE_DEBUG is set. Replace it with one that can fail: CCS storage must not run into GSM. [ And this was a debug session from hell, enormously helped by an AI doing much of the grunt-work. I'd like to call it my tireless helper, but the AI several times stated flat out that this was impossible and unsolvable and that we should just write a report about it. I suspect those things have been trained by people who may not be quite as stubborn as I am. But while the AI was ready to give up several times, it did keep adding debug code and analyzing it faithfully when I pushed. So credit where credit is due and I let the AI write the commit message above. This is basically a one-liner fixing a bogus "round_up()" to a "round_down()", but there were 24 patches adding more and more debug information to this, and 18 kernel boot to finally narrow it down to this. - Linus ] | 19 Oct |
| CVE-2026-89758 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: skip non-present PMDs when queueing folios Patch series "mm: handle device-private PMDs in walk callbacks", v3. Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support to PMD operations") a PMD may hold a device-private swap entry whenever an HMM-based GPU driver migrates an anonymous THP folio to device memory via migrate_vma_pages(). pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true for any non-present, non-none huge PMD), so several MM walk callbacks that used to assume present THP or migration entry are now reachable with a device-private PMD. The results range from a VM_BUG_ON() firing on debug kernels, to an oops on a bogus vmemmap dereference, to silently isolating an unrelated live folio from LRU in the aliasing case. This patch (of 3): queue_folios_pmd() is called under pmd_trans_huge_lock(), whose pmd_is_huge() check returns true for any non-present, non-none PMD softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding as a hardware PFN and can return a bogus folio pointer. Mirror queue_folios_pte_range(): handle non-present entries before looking up a folio. Keep migration entries counted as failures, but skip other non-present PMDs such as device-private entries. Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio to device memory via migrate_vma_pages(), leaving a device-private PMD. Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node() on that range. | 19 Oct |
| CVE-2026-89540 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sunrpc: init gssp_lock before publishing proc entry create_use_gss_proxy_proc_entry() publishes /proc/net/rpc/use-gss-proxy via proc_create_data() before init_gssp_clnt() runs mutex_init() on sn->gssp_lock. Once the dentry is linked under proc_subdir_lock it is immediately reachable from userspace, so a write that lands in the window drives set_gssp_clnt() into mutex_lock() on a zero-initialized struct mutex. create_use_gss_proxy_proc_entry(net) proc_create_data("use-gss-proxy", ...) /* dentry live */ init_gssp_clnt(sn) mutex_init(&sn->gssp_lock) /* too late */ write_gssp() set_gssp_clnt(net) mutex_lock(&sn->gssp_lock) /* uninitialized */ gssp_rpc_create(...) sn->gssp_clnt = clnt mutex_unlock(&sn->gssp_lock) The window spans only the two statements between proc_create_data() returning and init_gssp_clnt(), so a writer reaches it only if the registering thread is preempted there while another task is already opening the freshly published file. register_pernet_subsys() runs in preemptible context under pernet_ops_rwsem, so that preemption is possible, and the window widens on auth_rpcgss module load, when the proc entry is created for every live net namespace whose tasks are already running. A writer that wins the race locks a zero-filled struct mutex. On CONFIG_DEBUG_MUTEXES the missing magic value trips a "lock used without init" splat; on a production kernel the fast path acquires the lock via CMPXCHG(owner, 0, current). In the latter case a second writer that arrives before init_gssp_clnt() re-zeroes owner can enter set_gssp_clnt() concurrently, shut down the first writer's clnt while it is still in use, and leak the loser's clnt. Fix by initializing sn->gssp_lock in sunrpc_init_net() so its lifetime matches the sunrpc_net it lives in. sn->gssp_clnt is already NULL from the kzalloc that backs net_generic storage, so the lazy helper is no longer needed; drop init_gssp_clnt(), its prototype, and the call from create_use_gss_proxy_proc_entry(). sunrpc.ko is a build-time dependency of auth_rpcgss.ko, so sunrpc_init_net() has always run on every netns before any auth_gss pernet init can publish the proc entry. | 19 Oct |
| CVE-2026-89507 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_write_cm_event() ctx->file may only be changed under the handler lock and the xa_lock, which is what stops uevents being queued for a ctx while ucma_migrate_id() moves it to another file. The CM core takes that lock before invoking ucma_event_handler(), but the write() paths that queue uevents themselves do not. ucma_write_cm_event() re-reads ctx->file for each of its four dereferences, so ucma_migrate_id() can swap it mid-sequence: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ The window is the mutex_lock() itself: the writer sleeps in it while the migration reassigns ctx->file. The list_add_tail() then runs on file B's event_list holding only file A's mutex: list_add corruption. prev->next should be next (ffff888101320f30), but was ffff88814a08c418. (prev=ffff88814a075c18). kernel BUG at lib/list_debug.c:32! Call Trace: ucma_write_cm_event+0x36e/0x5e0 and file A's mut is left held forever, wedging its next writer in D state. The uevent is also stranded on a list ucma_cleanup_ctx_events() will not walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no RDMA device is involved, so an unprivileged user reaches all of this. Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is pinned by the ucma_get_ctx() reference. | 19 Oct |
| CVE-2026-89497 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: orangefs: skip leading spaces before parsing client debug masks orangefs_prepare_cdm_array() sizes each client debug keyword buffer with strcspn(cds_head, " "), but then parses the keyword with %s. The %s conversion skips leading whitespace, while strcspn() does not. If a client debug entry starts with a space, the allocation can be sized for an empty keyword while sscanf() copies the following non-empty token. This can write past the end of the allocated keyword buffer. Skip leading spaces before computing the keyword length so the allocation matches the string parsed by sscanf(). | 19 Oct |
| CVE-2026-81015 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() registers the LPS0 s2idle handler with acpi_register_lps0_dev() and creates the driver's debugfs directory before calling amd_stb_s2d_init(), which is the last step in probe that can fail. When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot be ioremapped on a long-running system, or the SMU rejects the S2D setup) the error path only calls pci_dev_put() and returns. This leaves amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks the debugfs directory, while the devm-managed resources backing the handler are torn down. Reloading the module then walks the corrupted list in acpi_register_lps0_dev() and hits: list_add corruption. next->prev should be prev, but was NULL. kernel BUG at lib/list_debug.c:29! acpi_register_lps0_dev+0x44/0x80 amd_pmc_probe+0x224/0x380 [amd_pmc] platform_probe+0x67/0x90 Even without a reload, the stale registration means the next s2idle transition calls into torn-down driver state. Unwind the debugfs directory and the LPS0 registration on the amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call unconditionally here: it is guarded on the same conditions as acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already relies on. | 19 Oct |
| CVE-2026-74640 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: fix OOB write in fcp_meter_ctl_get() fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size by the driver's own limit of 255 if (map.map_size < 1 || map.map_size > 255 || map.meter_slots < 1 || map.meter_slots > 255) return -EINVAL; and passes it to fcp_add_new_ctl() as the control's channel count, where it is stored as elem->channels. Every control read writes into struct snd_ctl_elem_value, whose integer array is declared long value[128], so the limit is 128, not 255. fcp_meter_ctl_get() stores one 64-bit word per channel into that array with no bound of its own: for (i = 0; i < elem->channels; i++) { int idx = private->meter_level_map[i]; int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]); ucontrol->value.integer.value[i] = value; } snd_ctl_elem_read_user() serves that object from memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so element i is written at byte 72 + 8 * i and element 144 already lands past the allocation. At map_size 255 the last store ends at byte 2112, 888 bytes past the object and 64 bytes into the adjacent slab object. The stored words come from the device and meter_level_map[] selects which word lands in which slot, so extent and contents are both controlled. The core does not catch this. snd_ctl_check_elem_info() is reached only from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a compile-time true. __snd_ctl_add_replace() validates kcontrol->count and never inspects elem->channels. Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives the hwdep descriptor that created it, so the out-of-bounds stores are issued by any process able to read controls on /dev/snd/controlC0. KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read: BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185 __asan_store8 fcp_meter_ctl_get snd_ctl_elem_read snd_ctl_ioctl Allocated by task 185: memdup_user snd_ctl_ioctl The buggy address is located 0 bytes to the right of allocated 1224-byte region [ffff000017af0000, ffff000017af04c8) Bound the map size by the ABI limit rather than by 255, and bound the store loop at the sink so it cannot run past the value array whatever elem->channels holds. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 16 Oct |
| CVE-2026-74518 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe. | 16 Oct |
| CVE-2026-74470 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | 16 Oct |
| CVE-2026-72389 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bridge: stp: Fix a potential use-after-free when deleting a bridge The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 | 16 Oct |
| CVE-2023-54308 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Create card with device-managed snd_devm_card_new() snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> | 15 Oct |
| CVE-2026-72454 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | 15 Oct |
| CVE-2026-45839 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N) false for any positive N. When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff, producing an out-of-bounds read far past the members array. A crafted BPF program with a negative CO-RE accessor on any struct that exists in vmlinux BTF (e.g. task_struct) crashes the kernel deterministically during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y (default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: <TASK> bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) </TASK> CO-RE accessor indices are inherently non-negative (struct member index, array element index, or enumerator index), so reject them immediately after parsing. | 15 Oct |
| CVE-2026-23378 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure. | 15 Oct |
| CVE-2024-57979 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: pps: Fix a use-after-free On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1 | 15 Oct |
| CVE-2024-50150 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated--- | 15 Oct |
| CVE-2024-49889 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality. | 15 Oct |
| CVE-2024-49884 | 7.8 high | 0.00% | debian, linux, debian_linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates. | 15 Oct |
| CVE-2024-26957 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects Tests with hot-plugging crytpo cards on KVM guests with debug kernel build revealed an use after free for the load field of the struct zcrypt_card. The reason was an incorrect reference handling of the zcrypt card object which could lead to a free of the zcrypt card object while it was still in use. This is an example of the slab message: kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43 kernel: kmalloc_trace+0x3f2/0x470 kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt] kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4] kernel: ap_device_probe+0x15c/0x290 kernel: really_probe+0xd2/0x468 kernel: driver_probe_device+0x40/0xf0 kernel: __device_attach_driver+0xc0/0x140 kernel: bus_for_each_drv+0x8c/0xd0 kernel: __device_attach+0x114/0x198 kernel: bus_probe_device+0xb4/0xc8 kernel: device_add+0x4d2/0x6e0 kernel: ap_scan_adapter+0x3d0/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43 kernel: kfree+0x37e/0x418 kernel: zcrypt_card_put+0x54/0x80 [zcrypt] kernel: ap_device_remove+0x4c/0xe0 kernel: device_release_driver_internal+0x1c4/0x270 kernel: bus_remove_device+0x100/0x188 kernel: device_del+0x164/0x3c0 kernel: device_unregister+0x30/0x90 kernel: ap_scan_adapter+0xc8/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: kthread+0x150/0x168 kernel: __ret_from_fork+0x3c/0x58 kernel: ret_from_fork+0xa/0x30 kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff) kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88 kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........ kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk. kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........ kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2 kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux) kernel: Call Trace: kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120 kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140 kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8 kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8 kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0 kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8 kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8 kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590 kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0 kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0 kernel: ---truncated--- | 15 Oct |
| CVE-2024-26951 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: check for dangling peer via is_dead instead of empty list If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 | 15 Oct |
| CVE-2025-40356 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ... | 14 Oct |
| CVE-2026-44516 | 7.6 high | 0.00% | no CPE yet | Valtimo is an open-source business process automation platform. From 12.4.0 to 12.33.0 and 13.26.0, the LoggingRestClientCustomizer in the web module automatically intercepts all outgoing HTTP calls made via Spring's RestClient and logs the full request body, response body, and response headers. When an error response is received, this information is included in the thrown HttpClientErrorException message, which is logged at ERROR level by Spring's default exception handling — regardless of the application's DEBUG log level setting. This vulnerability is fixed in 12.33.0 and 13.26.0. | Mon 26 Oct |
| CVE-2025-38590 | 7.5 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ> | Fri 30 Oct |
| CVE-2026-40461 | 7.5 high | 0.00% | anviz, cx7_firmware, cx2_lite_firmware | Anviz CX2 Lite and CX7 are vulnerable to unauthenticated POST requests that modify debug settings (e.g., enabling SSH), allowing unauthorized state changes that can facilitate later compromise. | Mon 26 Oct |
| CVE-2026-42552 | 7.5 high | 0.00% | no CPE yet | Flight is an extensible micro-framework for PHP. Prior to 3.18.1, the default error handler Engine::_error() writes the full exception message, exception code, and stack trace (including absolute filesystem paths) directly into the HTTP 500 response, with no debug gating. Production deployments leak internal paths, any secret interpolated into an exception message, and full module structure — giving attackers primitives for chaining other weaknesses (LFI, path traversal). This vulnerability is fixed in 3.18.1. | Mon 26 Oct |
| CVE-2026-15584 | 7.5 high | 0.00% | no CPE yet | A privilege escalation vulnerability was found in the incluster-checks tool for OpenShift. The tool creates privileged debug pods with host filesystem access in the shared default namespace, where any user with the standard edit role can exec into them and obtain root access on cluster nodes. | 24 Oct |
| CVE-2026-111574 | 7.5 high | 0.00% | no CPE yet | The Redirection for Contact Form 7 WordPress plugin before 3.2.12 does not sanitise or escape submitted form data stored as lead entries before outputting it in the lead debug metabox, allowing unauthenticated attackers to store a malicious script that executes when a logged-in user views the entry with the Redirection for Contact Form 7 WordPress plugin before 3.2.12's debug mode enabled. | 21 Oct |
| CVE-2026-53284 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: <TASK> close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7 I'm using a stripped down version, which seems to trigger the warning more reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done [CAUSE] Inside btrfs_write_and_wait_transaction(), we first try to write all dirty ebs, then wait for them to finish. After that we call btrfs_extent_io_tree_release() to free all extent states from dirty_pages io tree. However if we hit an error from btrfs_write_marked_extent(), then we still call btrfs_extent_io_tree_release() to clear that dirty_pages io tree, which may contain dirty records that we haven't yet submitted. Furthermore, the later transaction cleanup path will utilize that dirty_pages io tree to properly cleanup those dirty ebs, but since it's already empty, no dirty ebs are properly cleaned up, thus will later trigger the warnings inside invalidate_btree_folios(). ---truncated--- | 21 Oct |
| CVE-2026-53229 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame() returns false (e.g. XDPSQ is full), the function returns without unmapping the DMA address or freeing the xdp_frame allocated by xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on success, so the completion path cannot recover these entries. With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core] Add the missing unmap + xdp_return_frame, matching the cleanup already done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch, so no per-frag unmap is needed. | 21 Oct |
| CVE-2026-74695 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. | 21 Oct |
| CVE-2026-108089 | 7.5 high | 0.00% | no CPE yet | ** UNSUPPORTED WHEN ASSIGNED ** Exposure of sensitive system information to an unauthorized control sphere vulnerability in Apache Cocoon. An unauthenticated user could gain access to diagnostic interfaces, including triggering of cache, exposure of (verbose) debug logging and profile information. This issue affects Apache Cocoon: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | 20 Oct |
| CVE-2025-68336 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: locking/spinlock/debug: Fix data-race in do_raw_write_lock KCSAN reports: BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lock write (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1: do_raw_write_lock+0x120/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_fork read to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0: do_raw_write_lock+0x88/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_fork value changed: 0xffffffff -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111 Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") has adressed most of these races, but seems to be not consistent/not complete. >From do_raw_write_lock() only debug_write_lock_after() part has been converted to WRITE_ONCE(), but not debug_write_lock_before() part. Do it now. | 19 Oct |
| CVE-2026-46304 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] <TASK> [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 52 ---truncated--- | 19 Oct |
| CVE-2026-98050 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated--- | 19 Oct |
| CVE-2026-39420 | 7.4 high | 0.00% | maxkb | MaxKB is an open-source AI assistant for enterprise. In versions 2.7.1 and below, an incomplete sandbox protection mechanism allows an authenticated user with tool execution privileges to escape the LD_PRELOAD-based sandbox. By env command the attacker can clear the environment variables and drop the sandbox.so hook, leading to unrestricted Remote Code Execution (RCE) and network access. MaxKB restricts untrusted Python code execution via the Tool Debug API by injecting sandbox.so through the LD_PRELOAD environment variable. This intercepts sensitive C library functions (like execve, socket, open) to restrict network and file access. However, a patch allowed the /usr/bin/env utility to be executed by the sandboxed user. When an attacker is permitted to create subprocesses, they can execute the env -i python command. The -i flag instructs env to completely clear all environment variables before running the target program. This effectively drops the LD_PRELOAD environment variable. The newly spawned Python process will therefore execute natively without any sandbox hooks, bypassing all network and file system restrictions. This issue has been fixed in version 2.8.0. | Mon 26 Oct |
| CVE-2026-112360 | 7.4 high | 0.00% | no CPE yet | A security vulnerability has been detected in Netis EAP930 1.250905.115454. This issue affects the function return200 of the file /cgi-bin/debug of the component CGI Endpoint. The manipulation of the argument SIGNATURE leads to backdoor. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. The vendor was contacted early about this disclosure but did not respond in any way. | 20 Oct |
| CVE-2025-41731 | 7.4 high | 0.00% | no CPE yet | A vulnerability was identified in the password generation algorithm when accessing the debug-interface. An unauthenticated local attacker with knowledge of the password generation timeframe might be able to brute force the password in a timely manner and thus gain root access to the device if the debug interface is still enabled. | 18 Oct |
| CVE-2026-72019 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose. | 19 Oct |
Download these 400 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.