Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-97921 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag. | 19 Oct |
| CVE-2026-97920 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | 19 Oct |
| CVE-2026-97603 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: idpf: disable DIM work before freeing q_vectors idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them. idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC. Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain. Use disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is reached. Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object. It is a race, not a deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is the way to see it. | 19 Oct |
| CVE-2026-93187 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of input or output formats is zero, sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc() print an error and jump to the cleanup label. At that point 'ret' is still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so the function returns success and the caller never finds out that the widget setup actually failed. Set ret to -EINVAL before the goto so the error gets reported. | 19 Oct |
| CVE-2026-93142 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/rcar: Fix error checking in probe() This code accidentally calls thermal_zone_device_enable() before checking whether thermal_zone_device_register_with_trips() failed. Move the call until later to avoid an error pointer dereference of "priv->zone". The driver works differently depending on if we are using OF thermal or not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and call thermal_zone_device_enable() if not. We can share same error check for if either of these fail. Moving the thermal_zone_device_enable() call is a bit cleaner as well. The original code used a three step process to cleanup: 1. Call thermal_zone_device_unregister() to cleanup. 2. Set priv->zone to an error pointer to preserve the error code. 3. Set priv->zone to NULL to avoid a second call to thermal_zone_device_unregister() in the rcar_thermal_remove() function. Now we can just do a direct goto error_unregister and rcar_thermal_remove() handles the cleanup properly. | 19 Oct |
| CVE-2026-93048 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2), since those special offsets rely on cur_offset tracking the previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them") later added MTDPART_OFS_RETAIN (-3) for the static partition table path without updating mtd_add_partition() to also reject this value. With offset=-3 passed via BLKPG, the RETAIN size calculation in allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD = parent_size + 3). If the underflow result does not appear to leave enough space, allocate_partition() jumps to out_register via goto, skipping erasesize initialization. This results in erasesize=0, which triggers: WARN_ON((!mtd->erasesize || !master->_erase) && !(mtd->flags & MTD_NO_ERASE)) in add_mtd_device(). If the underflow result appears to leave enough space, a bogus partition size is calculated, but the "out of reach" sanity check catches the invalid offset and creates a disabled empty partition (offset=0, size=0) instead of returning an error. Fix this by adding MTDPART_OFS_RETAIN to the rejection list in mtd_add_partition(), consistent with the existing handling of APPEND and NXTBLK. | 19 Oct |
| CVE-2026-90400 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md: recheck spare changes before starting sync remove_spares() and remove_and_add_spares() modify the array's rdev configuration. These operations are only safe after the array has been suspended. md_start_sync() checks whether spare configuration changes are needed before taking reconfig_mutex. However, the rdev state can change before the mutex is acquired, so the initial check can become stale. In that case, md_choose_sync_action() may remove or replace rdevs while normal I/O is still accessing them. The race can occur as follows: raid10d Worker Normal IO ____________ _______________________ ______________________ raid10_write_request() wait_blocked_dev() set Blocked set Faulty Skip Faulty rdev rrdev->nr_pending++ .repl_bio = bio removeable_rdev = false . array not suspended . lock mddev goto err_handle lock mddev (wait) . update sb . clear Blocked . . unlock mddev . lock mddev (acquires) remove_spares() removeable_rdev = true raid10_remove_disk() rdev = replacement replacement = NULL rdev_dec_pending(NULL) unlock mddev (NULL)->nr_pending-- In this case, rdev_dec_pending() is called with a NULL pointer, resulting in a NULL pointer dereference when attempting to decrement nr_pending. Fix this by suspending the array when spare configuration changes are needed, including for non-read-write arrays, and checking again after taking reconfig_mutex. If the array was not already suspended and a change is now needed, release the mutex, suspend the array, and reacquire the mutex before continuing. | 19 Oct |
| CVE-2026-90393 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF in bpf_netns_link_update_prog In bpf_netns_link_update_prog, the checks for old_prog and prog type are currently performed locklessly before acquiring netns_bpf_mutex. This creates a race condition that can lead to a UAF issue. If two threads concurrently execute BPF_LINK_UPDATE on the same netns link, the following execution path can trigger a UAF: CPU0 CPU1 bpf_netns_link_update_prog if (old_prog && old_prog != link->prog) return -EPERM; bpf_netns_link_update_prog if (old_prog && old_prog != link->prog) ... old_prog = xchg(&link->prog, new_prog); bpf_prog_put(old_prog); if (new_prog->type != link->prog->type) <-- trigger UAF Fix this by moving the old_prog and prog->type checks inside the netns_bpf_mutex critical section. Meanwhile, use guard() to simplify lock management and avoid all the goto jumping. | 19 Oct |
| CVE-2026-90342 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock deadlock on arena lock failure Reported by the Sashiko AI review. arena_vm_fault() returns VM_FAULT_RETRY when it can't take arena->spinlock, but it never took mmap_lock. The fault path assumes a VM_FAULT_RETRY handler already dropped mmap_lock and re-takes it on the retry, so mmap_lock gets taken twice and can deadlock: do_user_addr_fault() { fault = handle_mm_fault(...); // calls arena_vm_fault() if (fault & VM_FAULT_RETRY) goto retry; // re-locks mmap_lock mmap_read_unlock(mm); } Return VM_FAULT_SIGBUS instead, for two reasons: 1. We could keep VM_FAULT_RETRY, but then we'd have to drop the fault lock first and cap the retry ourselves, the way __folio_lock_or_retry() does. 2. A failed raw_res_spin_lock_irqsave() already means a possible deadlock was detected, so retrying just hits the same lock again. So returning VM_FAULT_RETRY here is overkill. | 19 Oct |
| CVE-2026-90251 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too short for the prefix it declares. Verified with an emulated controller over /dev/vhci on a KASAN kernel, with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk and btrtl do unconditionally. A reply of exactly 11 bytes declaring evt_prefix_len = 255 reaches kmemdup and copies 255 bytes ("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since the reply ends at the fixed part, all 255 come from past the end of the response. No KASAN report is produced, as expected from the allocation slack described above. With this patch the response is rejected with "MSFT event prefix length mismatch" and msft->evt_prefix is left unset. | 19 Oct |
| CVE-2026-89976 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix job completion fence cleanup ethosu_ioctl_submit_job() allocates done_fence before validating buffer handles. Errors after allocation call ethosu_job_err_cleanup(), which frees the job but leaks the uninitialized fence. A scheduler dependency error also lets ethosu_job_run() return before dma_fence_init(). Normal cleanup then passes a zeroed refcount to dma_fence_put(). Release done_fence in the common cleanup path and use dma_fence_was_initialized() to distinguish initialized fences from raw allocations. [robh: also fix goto] | 19 Oct |
| CVE-2026-89683 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dentry ref leak on V4ROOT export filehandle lookup nfsd_set_fh_dentry() leaks the dentry reference from exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE switch cases detect NFSEXP_V4ROOT and goto out. The out: label calls exp_put() but never dput(dentry), and fhp->fh_dentry was never assigned so fh_put() cannot compensate. A crafted NFSv3 filehandle targeting a V4ROOT export's fsid triggers the leak on every request. | 19 Oct |
| CVE-2026-89590 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels] | 19 Oct |
| CVE-2026-89498 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: orangefs: fix double-free of trailer_buf on readdir copy failure On a readdir downcall, orangefs_devreq_write_iter() frees op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails, but does not clear the pointer before goto Efault. The waiter in do_readdir() is then woken with a negative status and frees the same pointer again on its r < 0 path, causing a deterministic double-free. A client holding /dev/pvfs2-req triggers it by sending a readdir downcall whose declared trailer_size exceeds the bytes it supplies. Clear the pointer after freeing so the readdir-side vfree() becomes a no-op. | 19 Oct |
| CVE-2026-74620 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none. | 14 Oct |
| CVE-2025-68289 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix memory leak in eem_unwrap The existing code did not handle the failure case of usb_ep_queue in the command path, potentially leading to memory leaks. Improve error handling to free all allocated resources on usb_ep_queue failure. This patch continues to use goto logic for error handling, as the existing error handling is complex and not easily adaptable to auto-cleanup helpers. kmemleak results: unreferenced object 0xffffff895a512300 (size 240): backtrace: slab_post_alloc_hook+0xbc/0x3a4 kmem_cache_alloc+0x1b4/0x358 skb_clone+0x90/0xd8 eem_unwrap+0x1cc/0x36c unreferenced object 0xffffff8a157f4000 (size 256): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc kmalloc_trace+0x48/0x140 dwc3_gadget_ep_alloc_request+0x58/0x11c usb_ep_alloc_request+0x40/0xe4 eem_unwrap+0x204/0x36c unreferenced object 0xffffff8aadbaac00 (size 128): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc __kmalloc+0x64/0x1a8 eem_unwrap+0x218/0x36c unreferenced object 0xffffff89ccef3500 (size 64): backtrace: slab_post_alloc_hook+0xbc/0x3a4 __kmem_cache_alloc_node+0x1b4/0x2dc kmalloc_trace+0x48/0x140 eem_unwrap+0x238/0x36c | 13 Oct |
| CVE-2025-68734 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: hfcsusb: fix memory leak in hfcsusb_probe() In hfcsusb_probe(), the memory allocated for ctrl_urb gets leaked when setup_instance() fails with an error code. Fix that by freeing the urb before freeing the hw structure. Also change the error paths to use the goto ladder style. Compile tested only. Issue found using a prototype static analysis tool. | 13 Oct |
117 of 117 · Previous
Download these 117 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.