Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2020-11979 | 7.5 high | 8.0% | apache, gradle, ant, fedora | As mitigation for CVE-2020-1945 Apache Ant 1.10.8 changed the permissions of temporary files it created so that only the current user was allowed to access them. Unfortunately the fixcrlf task deleted the temporary file and created a new one without said protection, effectively nullifying the effort. This would still allow an attacker to inject modified source files into the build process. | 8 Oct |
| CVE-2023-3446 | 5.3 medium | 7.0% | openssl | Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. | 14 Oct |
| CVE-2022-40304 | 7.8 high | 6.0% | xmlsoft, netapp, libxml2, active_iq_unified_manager, clustered_data_ontap | An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked. | 14 Oct |
| CVE-2026-50627 | 9.1 critical | 5.0% | apache, cxf | The JwtAccessTokenValidator class in Apache CXF fails to validate the 'aud' (Audience) claims of incoming JWT access tokens. This allows a JWT issued for one Resource Server to be successfully replayed against a completely different Resource Server, leading to Token Confusion/Routing attacks. Users are recommended to upgrade to versions 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. | Mon 26 Oct |
| CVE-2019-13565 | 7.5 high | 5.0% | openldap, canonical, ubuntu_linux, debian_linux | An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user. | 14 Oct |
| CVE-2021-21409 | 5.9 medium | 5.0% | netty, debian, debian_linux, oncommand_api_services | Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty (io.netty:netty-codec-http2) before version 4.1.61.Final there is a vulnerability that enables request smuggling. The content-length header is not correctly validated if the request only uses a single Http2HeaderFrame with the endStream set to to true. This could lead to request smuggling if the request is proxied to a remote peer and translated to HTTP/1.1. This is a followup of GHSA-wm47-8v5p-wjpj/CVE-2021-21295 which did miss to fix this one case. This was fixed as part of 4.1.61.Final. | 8 Oct |
| CVE-2022-42915 | 8.1 high | 4.0% | haxx, fedoraproject, curl, fedora, h300s_firmware | curl before 7.86.0 has a double free. If curl is told to use an HTTP proxy for a transfer with a non-HTTP(S) URL, it sets up the connection to the remote server by issuing a CONNECT request to the proxy, and then tunnels the rest of the protocol through. An HTTP proxy might refuse this request (HTTP proxies often only allow outgoing connections to specific port numbers, like 443 for HTTPS) and instead return a non-200 status code to the client. Due to flaws in the error/cleanup handling, this could trigger a double free in curl if one of the following schemes were used in the URL for the transfer: dict, gopher, gophers, ldap, ldaps, rtmp, rtmps, or telnet. The earliest affected version is 7.77.0. | 14 Oct |
| CVE-2021-22922 | 6.5 medium | 4.0% | haxx, fedoraproject, curl, fedora, cloud_backup | When curl is instructed to download content using the metalink feature, thecontents is verified against a hash provided in the metalink XML file.The metalink XML file points out to the client how to get the same contentfrom a set of different URLs, potentially hosted by different servers and theclient can then download the file from one or several of them. In a serial orparallel manner.If one of the servers hosting the contents has been breached and the contentsof the specific file on that server is replaced with a modified payload, curlshould detect this when the hash of the file mismatches after a completeddownload. It should remove the contents and instead try getting the contentsfrom another URL. This is not done, and instead such a hash mismatch is onlymentioned in text and the potentially malicious content is kept in the file ondisk. | 14 Oct |
| CVE-2021-22897 | 5.3 medium | 4.0% | haxx, oracle, curl, communications_cloud_native_core_binding_support_function, communications_cloud_native_core_network_function_cloud_native_environment | curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. | 14 Oct |
| CVE-2021-46848 | 9.1 critical | 3.0% | gnu, fedoraproject, libtasn1, fedora, debian_linux | GNU Libtasn1 before 4.19.0 has an ETYPE_OK off-by-one array size check that affects asn1_encode_simple_der. | 14 Oct |
| CVE-2022-45061 | 7.5 high | 3.0% | python, fedoraproject, fedora, active_iq_unified_manager | An issue was discovered in Python before 3.11.1. An unnecessary quadratic algorithm exists in one path when processing some inputs to the IDNA (RFC 3490) decoder, such that a crafted, unreasonably long name being presented to the decoder could lead to a CPU denial of service. Hostnames are often supplied by remote servers that could be controlled by a malicious actor; in such a scenario, they could trigger excessive CPU consumption on the client attempting to make use of an attacker-supplied supposed hostname. For example, the attack payload could be placed in the Location header of an HTTP response with status code 302. A fix is planned in 3.11.1, 3.10.9, 3.9.16, 3.8.16, and 3.7.16. | 14 Oct |
| CVE-2022-27782 | 7.5 high | 3.0% | haxx, debian, curl, debian_linux, universal_forwarder | libcurl would reuse a previously created connection even when a TLS or SSHrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, several TLS andSSH settings were left out from the configuration match checks, making themmatch too easily. | 14 Oct |
| CVE-2019-12290 | 7.5 high | 3.0% | gnu, libidn2 | GNU libidn2 before 2.2.0 fails to perform the roundtrip checks specified in RFC3490 Section 4.2 when converting A-labels to U-labels. This makes it possible in some circumstances for one domain to impersonate another. By creating a malicious domain that matches a target domain except for the inclusion of certain punycoded Unicode characters (that would be discarded when converted first to a Unicode label and then back to an ASCII label), arbitrary domains can be impersonated. | 14 Oct |
| CVE-2021-32751 | 7.5 high | 3.0% | gradle | Gradle is a build tool with a focus on build automation. In versions prior to 7.2, start scripts generated by the `application` plugin and the `gradlew` script are both vulnerable to arbitrary code execution when an attacker is able to change environment variables for the user running the script. This may impact those who use `gradlew` on Unix-like systems or use the scripts generated by Gradle in thieir application on Unix-like systems. For this vulnerability to be exploitable, an attacker needs to be able to set the value of particular environment variables and have those environment variables be seen by the vulnerable scripts. This issue has been patched in Gradle 7.2 by removing the use of `eval` and requiring the use of the `bash` shell. There are a few workarounds available. For CI/CD systems using the Gradle build tool, one may ensure that untrusted users are unable to change environment variables for the user that executes `gradlew`. If one is unable to upgrade to Gradle 7.2, one may generate a new `gradlew` script with Gradle 7.2 and use it for older versions of Gradle. Fpplications using start scripts generated by Gradle, one may ensure that untrusted users are unable to change environment variables for the user that executes the start script. A vulnerable start script could be manually patched to remove the use of `eval` or the use of environment variables that affect the application's command-line. If the application is simple enough, one may be able to avoid the use of the start scripts by running the application directly with Java command. | 8 Oct |
| CVE-2020-6079 | 7.5 high | 3.0% | videolabs, debian, libmicrodns, debian_linux | An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode. | 8 Oct |
| CVE-2019-20838 | 7.5 high | 3.0% | pcre, apple, macos, universal_forwarder | libpcre in PCRE before 8.43 allows a subject buffer over-read in JIT when UTF is disabled, and \X or \R has more than one fixed quantifier, a related issue to CVE-2019-20454. | 8 Oct |
| CVE-2018-7158 | 7.5 high | 3.0% | nodejs, node.js | The `'path'` module in the Node.js 4.x release line contains a potential regular expression denial of service (ReDoS) vector. The code in question was replaced in Node.js 6.x and later so this vulnerability only impacts all versions of Node.js 4.x. The regular expression, `splitPathRe`, used within the `'path'` module for the various path parsing functions, including `path.dirname()`, `path.extname()` and `path.parse()` was structured in such a way as to allow an attacker to craft a string, that when passed through one of these functions, could take a significant amount of time to evaluate, potentially leading to a full denial of service. | 8 Oct |
| CVE-2024-52533 | 9.8 critical | 2.0% | gnome, debian, glib, debian_linux, active_iq_unified_manager | gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character. | 15 Oct |
| CVE-2026-66733 | 8.7 high | 2.0% | no CPE yet | Sonic 3 A.I.R. before commit 2492d18 contains an unbounded memory allocation vulnerability in ReceivedPacketCache::enqueuePacket() that allows unauthenticated remote attackers to crash the server process by sending a crafted UDP packet with mUniquePacketID set to the maximum uint32 value. The mUniquePacketID field is read directly from the UDP wire-format packet header without bounds checking, causing the server to allocate one CacheItem per missing packet ID gap, exhausting available host memory and propagating an uncaught std::bad_alloc exception to std::terminate(). | Sat 24 Oct |
| CVE-2026-0631 | 8.5 high | 2.0% | tp-link, archer_be230_firmware | An OS Command Injection vulnerability exists in the Surfshark VPN login functionality in TP-Link Archer BE230 v1.2, BE3600v1, AX10 v3 and AXE75 v1, allowing an adjacent authenticated attacker to execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420 and Archer AXE75 v1 < 1.5.6 Build 20260623. | 15 h ago |
| CVE-2026-22222 | 8.5 high | 2.0% | tp-link, archer_be230_firmware | An OS Command Injection vulnerability in TP-Link Archer BE230 v1.2 and Archer AXE75 v2 (web modules) allows adjacent authenticated attacker to execute arbitrary code. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. | 14 Oct |
| CVE-2019-19721 | 7.8 high | 2.0% | videolan, vlc_media_player | An off-by-one error in the DecodeBlock function in codec/sdl_image.c in VideoLAN VLC media player before 3.0.9 allows remote attackers to cause a denial of service (memory corruption) via a crafted image file. NOTE: this may be related to the SDL_Image product. | 8 Oct |
| CVE-2023-22792 | 7.5 high | 2.0% | rubyonrails, rails | A regular expression based DoS vulnerability in Action Dispatch <6.0.6.1,< 6.1.7.1, and <7.0.4.1. Specially crafted cookies, in combination with a specially crafted X_FORWARDED_HOST header can cause the regular expression engine to enter a state of catastrophic backtracking. This can cause the process to use large amounts of CPU and memory, leading to a possible DoS vulnerability All users running an affected release should either upgrade or use one of the workarounds immediately. | Sat 24 Oct |
| CVE-2023-22795 | 7.5 high | 2.0% | rubyonrails, debian, rails, debian_linux | A regular expression based DoS vulnerability in Action Dispatch <6.1.7.1 and <7.0.4.1 related to the If-None-Match header. A specially crafted HTTP If-None-Match header can cause the regular expression engine to enter a state of catastrophic backtracking, when on a version of Ruby below 3.2.0. This can cause the process to use large amounts of CPU and memory, leading to a possible DoS vulnerability All users running an affected release should either upgrade or use one of the workarounds immediately. | Sat 24 Oct |
| CVE-2025-59789 | 7.5 high | 2.0% | apache, brpc | Uncontrolled recursion in the json2pb component in Apache bRPC (version < 1.15.0) on all platforms allows remote attackers to make the server crash via sending deep recursive json data. Root Cause: The bRPC json2pb component uses rapidjson to parse json data from the network. The rapidjson parser uses a recursive parsing method by default. If the input json has a large depth of recursive structure, the parser function may run into stack overflow. Affected Scenarios: Use bRPC server with protobuf message to serve http+json requests from untrusted network. Or directly use JsonToProtoMessage to convert json from untrusted input. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.15.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3099 Note: No matter which option you choose, you should know that the fix introduces a recursion depth limit with default value 100. It affects these functions: ProtoMessageToJson, ProtoMessageToProtoJson, JsonToProtoMessage, and ProtoJsonToProtoMessage. If your requests contain json or protobuf messages that have a depth exceeding the limit, the request will be failed after applying the fix. You can modify the gflag json2pb_max_recursion_depth to change the limit. | 18 Oct |
| CVE-2020-19185 | 6.5 medium | 2.0% | invisible-island, netapp, ncurses, active_iq_unified_manager | Buffer Overflow vulnerability in one_one_mapping function in progs/dump_entry.c:1373 in ncurses 6.1 allows remote attackers to cause a denial of service via crafted command. | 14 Oct |
| CVE-2023-28321 | 5.9 medium | 2.0% | haxx, debian, curl, debian_linux, fedora | An improper certificate validation vulnerability exists in curl <v8.1.0 in the way it supports matching of wildcard patterns when listed as "Subject Alternative Name" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`. | Fri 23 Oct |
| CVE-2021-21290 | 5.5 medium | 2.0% | netty, debian, debian_linux, quarkus | Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user. | 8 Oct |
| CVE-2025-9977 | 5.3 medium | 2.0% | no CPE yet | Value provided in one of POST parameters sent during the process of logging in to Times Software E-Payroll is not sanitized properly, which allows an unauthenticated attacker to perform DoS attacks. SQL injection attacks might also be feasible, although so far creating a working exploit has been prevented probably by backend filtering mechanisms. Additionally, command injection attempts cause the application to return extensive error messages disclosing some information about the internal infrastructure. Patching status is unknown because the vendor has not replied to messages sent by the CNA. | 18 Oct |
| CVE-2026-42369 | 10.0 critical | 1.0% | no CPE yet | GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices. It is a native application accessed locally, but it is also possible to enable remote access via the "WebCam Server" feature. Once enabled, it is possible to access to the management and monitoring feature via a regular Web interface. This webersever is another native application, compiled without ASLR, which makes exploitation much easier and more likely. Most of the features require authentication before being reachable and leverage a standard login page to grant access. However the `gvapi` endpoint uses its own authentication mechanism via an `HTTP Authorization` header. It supports both `Basic` authentication and the `Digest` modes of authentication. #### Stack-overflow via unbound copy of base64 decoded string The `b64decoder` string is sized dynamically, but it is then copied to the `Buffer` stack variable one character at the time at [0], and there's no bound-check. As such, if the decoded string is bigger than 256 characters (the size of the `Buffer` variable) then a stack overflow occurs. Because the data can be fully controlled by an attacker and lack of ASLR, this vulnerability can easily be exploited to gain full code execution as SYSTEM on the machine running the service. | Mon 26 Oct |
| CVE-2026-43997 | 10.0 critical | 1.0% | vm2_project, vm2 | vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.0, it is possible to obtain the host Object. There are various ways to use the host Object, to escape the sandbox, one example would be using HostObject.getOwnPropertySymbols to obtain Symbol(nodejs.util.inspect.custom). This vulnerability is fixed in 3.11.0. | Mon 26 Oct |
| CVE-2026-44182 | 10.0 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. In versions prior to 3.3.0, the server interpolates untrusted environment variables (e.g., KERNEL_XXX) into Kubernetes manifests without YAML-aware escaping, enabling YAML injection attacks. Attackers can inject new fields, overwrite critical fields (e.g., duplicate securityContext keys, where the last one prevails), and inject document boundaries (--- for new documents, ... for end-of-document) to generate multiple resources, potentially creating arbitrary types, such as privileged pods. The Jinja2 template for the Kubernetes manifest contains several kernel_xxx variables, such as kernel_working_dir that are used when rendering the manifest and are all vectors for YAML injection. This issue has been fixed in version 3.3.0. | Sat 24 Oct |
| CVE-2026-16326 | 10.0 critical | 1.0% | no CPE yet | In consul-mcp-server, versions 0.1.0 up to 0.1.3 did not properly isolate session state in stateless mode, which may allow one client's Consul authentication token to be used for subsequent requests from other clients. This vulnerability (CVE-2026-16326) is fixed in consul-mcp-server 0.1.4. | Sat 24 Oct |
| CVE-2026-105944 | 10.0 critical | 1.0% | no CPE yet | Apache Pulsar Manager is a web console for administering Apache Pulsar clusters. It has its own user accounts and login, and it can be configured with an HTTP authentication credential, such as a token, that it uses to call the Pulsar admin API on behalf of its users. Pulsar Manager has the following security issues: - The operation for creating the initial administrator (superuser) account is available without authentication, and it remains available after the instance has been initialized. Anyone who can reach Pulsar Manager can create an additional administrator account at any time and log in with it. This issue affects versions 0.3.0 and later. - Requests to the Pulsar admin API that Pulsar Manager proxies to the configured Pulsar cluster are not subject to Pulsar Manager's authentication. Version 0.2.0 checks the caller's permissions for some of these requests, but not for all of them. An unauthenticated user can therefore use Pulsar Manager to send requests to the Pulsar admin API, which the cluster processes with the credential configured in Pulsar Manager. - The destination of a proxied request can be chosen by the requester, and Pulsar Manager attaches its configured Pulsar admin credential to the request. An unauthenticated user can make Pulsar Manager send this credential to a host of the user's choosing, and the credential can then be used directly against the Pulsar cluster. - In versions 0.3.0 and later, Pulsar Manager does not distinguish between privilege levels of its accounts. Every account, including one created through the first issue, effectively has full administrative privileges in Pulsar Manager. The impact depends on the version and the deployment. In versions 0.3.0 and later, any user who can reach Pulsar Manager over the network can take full control of Pulsar Manager. In all versions, when Pulsar Manager is configured with an HTTP authentication credential for a Pulsar cluster, any user who can reach Pulsar Manager can perform the Pulsar admin operations that this credential permits and can obtain the credential itself. When Pulsar Manager is configured with the token signing key of a Pulsar cluster, an administrator of Pulsar Manager can create tokens for the cluster. Apache Pulsar Manager is no longer maintained and is completely unsupported. The Apache Pulsar PMC has retired it. There are no supported versions, and no further releases, fixes or security updates will be made for any version. These issues will not be fixed. Using Pulsar Manager is not recommended. Users should stop using Pulsar Manager, remove existing deployments, and move to one of the alternatives described in the Administration UI documentation (https://pulsar.apache.org/docs/administration-ui). Users who have exposed Pulsar Manager configured with a Pulsar credential or token signing key should also consider replacing that credential or key. Until a deployment is removed, users should not expose Pulsar Manager to untrusted networks, and should restrict network access to it to trusted administrators. | Fri 23 Oct |
| CVE-2026-74279 | 10.0 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: crypto: cavium/cpt - fix DMA cleanup using wrong loop index The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. | 16 Oct |
| CVE-2026-19656 | 9.9 critical | 1.0% | scada-lts | ScadaLTS 2.7.8.1 exposes a server-side method that lacks authorization checks, allowing any authenticated user (including one holding only low-privilege, read-only permissions) to execute arbitrary operating system commands on the host. Successful exploitation results in code execution in the context of the ScadaLTS server process (root), leading to full compromise of the underlying system. | Fri 23 Oct |
| CVE-2026-85748 | 9.9 critical | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From 12.3.1 until 12.3.3 and 13.0.2, SYS_REFCURSOR handling is affected because cursor-array reallocation can leave stale references in routine contexts. A low-privileged attacker can open a large number of SYS_REFCURSORs and then fetch one to trigger a use-after-free that can enable remote code execution when combined with another vulnerability. This issue is fixed in versions 12.3.3 and 13.0.2. | 20 Oct |
| CVE-2025-68667 | 9.9 critical | 1.0% | no CPE yet | Conduit is a chat server powered by Matrix. A vulnerability that affects a number of Conduit-derived homeservers allows a remote, unauthenticated attacker to force the target server to cryptographically sign arbitrary membership events. Affected products include Conduit prior to version 0.10.10, continuwuity prior to version 0.5.0, Grapevine prior to commit `9a50c244`, and tuwunel prior to version 1.4.8. The flaw exists because the server fails to validate the origin of a signing request, provided the event's state_key is a valid user ID belonging to the target server. Attackers can forge "leave" events for any user on the target server. This forcibly removes users (including admins and bots) from rooms. This allows denial of service and/or the removal of technical protections for a room (including policy servers, if all users on the policy server are removed). Attackers can forge "invite" events from a victim user to themselves, provided they have an account on a server where there is an account that has the power level to send invites. This allows the attacker to join private or invite-only rooms accessible by the victim, exposing confidential conversation history and room state. Attackers can forge "ban" events from a victim user to any user below the victim user's power level, provided the victim has the power level to issue bans AND the target of the ban resides on the same server as the victim. This allows the attacker to ban anyone in a room who is on the same server as the vulnerable one, however cannot exploit this to ban users on other servers or the victim themself. Conduit fixes the issue in version 0.10.10. continuwuity fixes the issue in commits `7fa4fa98` and `b2bead67`, released in 0.5.0. tuwunel fixes the issue in commit `dc9314de1f8a6e040c5aa331fe52efbe62e6a2c3`, released in 1.4.8. Grapevine fixes the issue in commit `9a50c2448abba6e2b7d79c64243bb438b351616c`. As a workaround, block access to the `PUT /_matrix/federation/v2/invite/{roomId}/{eventId}` endpoint using your reverse proxy. | 19 Oct |
| CVE-2026-110879 | 9.8 critical | 1.0% | no CPE yet | jackson-databind validates the outer class of a class-name type ID but accepts attacker-selected classes inside its generic arguments, even when those classes violate the declared type or would be rejected as direct type IDs. This bypasses the generic-argument validation added for CVE-2026-54512 (GHSA-j3rv-43j4-c7qm), of which this is an incomplete fix. DatabindContext._resolveAndValidateGeneric() checks the outer class against the declared base type and then passes each argument from the type ID to _validateTypeParameter(), which validates the argument against the outer base type rather than enforcing its corresponding declared generic binding. It also invokes validators with arguments that have not passed the subtype check those validators expect. Under the default DefaultBaseTypeLimitingValidator this accepts an unrelated class inside a generic subtype even when the same class is rejected as a direct type ID. Where an allowIfBaseType(...) rule approves the outer type, Jackson substitutes LaissezFaireSubTypeValidator, so the configured validator no longer restricts the embedded arguments. The element type of a plain array type ID such as [Lpkg.Gadget; is likewise left unvalidated once the array's base type is approved. Affected paths include annotation-based class-name polymorphism with a default Jackson 3.x JsonMapper, configured default typing in both Jackson 2.x and 3.x, and integrations that expose that default typing. The default-validator case requires no application-authored validator: with @JsonTypeInfo(use = Id.CLASS), a direct gadget type ID is rejected as "Not a subtype", while a type ID naming a generic wrapper around the same gadget is accepted and deserialized, including attacker-supplied bean properties. Where class-name default typing permits Map, a property declared as Map<String,String> accepts HashMap<FileSystemXmlApplicationContext,String>; map-key discovery then passes the attacker-controlled JSON property name to the selected class's one-string constructor. With Spring on the classpath and attacker-controlled XML the application can load, that constructor loads the XML and invokes ProcessBuilder.start() under the application account, giving arbitrary command execution. This issue affects com.fasterxml.jackson.core:jackson-databind from 2.10.0 and tools.jackson.core:jackson-databind from 3.0.0. Releases before 2.10.0 are not affected, because PolymorphicTypeValidator was introduced in jackson-databind 2.10.0. | Wed 28 Oct |
| CVE-2026-58081 | 9.8 critical | 1.0% | freebsd | Several encoding modules, including HZ, UTF-7, VIQR, and ZW, did not properly check the size of the caller-supplied output buffer before writing converted characters. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules. | Tue 27 Oct |
| CVE-2026-58082 | 9.8 critical | 1.0% | freebsd | The ISO-2022 encoding module used a stack buffer sized to MB_LEN_MAX (6 bytes) for intermediate character output. Some ISO-2022 variants can require up to 10 bytes per character, in which case conversions can trigger a stack buffer overflow of up to four bytes. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules. | Tue 27 Oct |
| CVE-2026-41635 | 9.8 critical | 1.0% | apache, mina | Apache MINA's AbstractIoBuffer.resolveClass() contains two branches, one of them (for static classes or primitive types) does not check the class at all, bypassing the classname allowlist and allowing arbitrary code to be executed. The fix checks if the class is present in the accepted class filter before calling Class.forName(). Affected versions are Apache MINA 2.0.0 <= 2.0.27, 2.1.0 <= 2.1.10, and 2.2.0 <= 2.2.5. The problem is resolved in Apache MINA 2.0.28, 2.1.11, and 2.2.6 by applying the classname allowlist earlier. Affected are applications using Apache MINA that call IoBuffer.getObject(). Applications using Apache MINA are advised to upgrade. | Mon 26 Oct |
| CVE-2026-63888 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. | Mon 26 Oct |
| CVE-2026-9711 | 9.8 critical | 1.0% | no CPE yet | The EventON - WordPress Virtual Event Calendar Plugin plugin for WordPress (full) is vulnerable to SQL Injection via the WordPress 'search' parameter in versions up to, and including, 5.0.11 due to insufficient escaping on the user supplied parameter and lack of preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database, granted the "Enable additional search queries" setting is enabled and at least one published event exists. | Sun 25 Oct |
| CVE-2026-44180 | 9.8 critical | 1.0% | jupyter, enterprise_gateway | Jupyter Enterprise Gateway launches remote Jupyter Notebook kernels across distributed clusters like Apache Spark, Kubernetes, and Docker Swarm. Versions 2.0.0rc1 and above prior to 3.3.0 have a prohibited UID and GID feature that by default prevents launching kernels with UID or GID 0 (root), and this restriction can be bypassed using a specially crafted KERNEL_UID or KERNEL_GID value. This input validation vulnerability allows running Jupyter kernels as root, which can be dangerous as it allows more attack surface, and may lead to container escapes, compromising the worker node and all workloads running on it. Repeated exploitation can compromise all worker nodes, and thus the entire Kubernetes cluster. It is possible to specify volume mounts, so one vector for a container escape is to use a hostPath R/W volume mount, use this UID/GID bypass to run as root, and then gain code execution in the underlying worker node by creating a crontab entry in the mounted host file system. This issue has been fixed in version 3.0.0. | Sat 24 Oct |
| CVE-2026-15982 | 9.8 critical | 1.0% | no CPE yet | The Aimogen Pro - All-in-One AI Content Writer, Editor, ChatBot & Automation Toolkit plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.8.4. This is due to due to a missing capability check on the 'aiomatic_call_google_ai_function' function. This makes it possible for unauthenticated attackers to leverage the 'aimogen_wp_god_mode' tool to clear function blacklists and execute arbitrary PHP functions, such as creating administrator accounts. | Sat 24 Oct |
| CVE-2026-98959 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated--- | Sat 24 Oct |
| CVE-2026-98548 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing. | Sat 24 Oct |
| CVE-2026-68502 | 9.8 critical | 1.0% | no CPE yet | LazyOwn RedTeam/APT Framework is an AI-powered C2 and red-team operations framework. Prior to 0.2.154, LazyOwn's lazyc2.py registers an unauthenticated Socket.IO input event handler that dispatches data.get('value') to LazyOwnShell.one_cmd, reaching LazyOwnShell.do_cmd and subprocess.call(command, shell=True), allowing unauthenticated remote code execution in the C2 process. This issue is fixed in 0.2.154. | Fri 23 Oct |
| CVE-2026-10025 | 9.8 critical | 1.0% | ibm, qradar_security_information_and_event_manager | IBM QRadar 7.6.0.0 through 7.6.0.1, and 7.5.0 through 7.5.0 UP 15 Interim Fix 005 has an XML External Entity (XXE) injection vulnerability. The vulnerability resides in the parseXmlPayload() function within the event processing pipeline ( q1labs_core.jar ). When at least one log source type is configured to use XML-format property autodetection, the system processes XML-formatted syslog events sent to port 514 (UDP/TCP) without authentication. | Fri 23 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.