Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-64543 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: fix use-after-free of the discoverer in tipc_disc_rcv() bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(), but tipc_disc_rcv() still dereferences b->disc in RX softirq under rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv). L2 bearers are safe thanks to the synchronize_net() in tipc_disable_l2_media(), but the UDP bearer defers that call to the cleanup_bearer() workqueue, so the discoverer is freed with no grace period: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 <IRQ> tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) </IRQ> Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001) The bearer is freed with kfree_rcu(); free the discoverer the same way. Add an rcu_head to struct tipc_discoverer and free it and its skb from an RCU callback. Because the RCU callback (tipc_disc_free_rcu) lives in module text, a call_rcu() that is still pending when the tipc module is unloaded would invoke a freed function. Add an rcu_barrier() to tipc_exit() after the bearer subsystem has been torn down, so all pending discoverer callbacks have run before the module text goes away. Reachable from an unprivileged user namespace: the TIPCv2 genl family is netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC and CONFIG_TIPC_MEDIA_UDP. | 19 Oct |
| CVE-2026-45910 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | 19 Oct |
| CVE-2026-31419 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | 19 Oct |
| CVE-2026-23340 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | 19 Oct |
| CVE-2026-23083 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO. | 19 Oct |
| CVE-2026-98276 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless. | 19 Oct |
| CVE-2026-89789 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free gtp_newlink()'s error path frees tid_hash and addr_hash without waiting for an RCU grace period after clearing sk_user_data. A concurrent gtp_encap_recv() in softirq may still hold the gtp_dev pointer obtained via rcu_dereference_sk_user_data() and access the freed memory. BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152) Call Trace: <IRQ> gtp0_pdp_find+0x1f6/0x200 gtp_encap_recv+0x527/0x24b0 udp_queue_rcv_one_skb+0x75f/0xc10 Add synchronize_net() before the kfree calls in out_hashtable, which covers all error paths from both gtp_encap_enable() and gtp_create_sockets(). | 19 Oct |
| CVE-2026-89487 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | 19 Oct |
| CVE-2026-74609 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | 16 Oct |
| CVE-2026-74283 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM. | 16 Oct |
| CVE-2025-38154 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Avoid using sk_socket after free when sending The sk->sk_socket is not locked or referenced in backlog thread, and during the call to skb_send_sock(), there is a race condition with the release of sk_socket. All types of sockets(tcp/udp/unix/vsock) will be affected. Race conditions: ''' CPU0 CPU1 backlog::skb_send_sock sendmsg_unlocked sock_sendmsg sock_sendmsg_nosec close(fd): ... ops->release() -> sock_map_close() sk_socket->ops = NULL free(socket) sock->ops->sendmsg ^ panic here ''' The ref of psock become 0 after sock_map_close() executed. ''' void sock_map_close() { ... if (likely(psock)) { ... // !! here we remove psock and the ref of psock become 0 sock_map_remove_links(sk, psock) psock = sk_psock_get(sk); if (unlikely(!psock)) goto no_psock; <=== Control jumps here via goto ... cancel_delayed_work_sync(&psock->work); <=== not executed sk_psock_put(sk, psock); ... } ''' Based on the fact that we already wait for the workqueue to finish in sock_map_close() if psock is held, we simply increase the psock reference count to avoid race conditions. With this patch, if the backlog thread is running, sock_map_close() will wait for the backlog thread to complete and cancel all pending work. If no backlog running, any pending work that hasn't started by then will fail when invoked by sk_psock_get(), as the psock reference count have been zeroed, and sk_psock_drop() will cancel all jobs via cancel_delayed_work_sync(). In summary, we require synchronization to coordinate the backlog thread and close() thread. The panic I catched: ''' Workqueue: events sk_psock_backlog RIP: 0010:sock_sendmsg+0x21d/0x440 RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001 ... Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x14c/0x230 ? asm_exc_general_protection+0x26/0x30 ? sock_sendmsg+0x21d/0x440 ? sock_sendmsg+0x3e0/0x440 ? __pfx_sock_sendmsg+0x10/0x10 __skb_send_sock+0x543/0xb70 sk_psock_backlog+0x247/0xb80 ... ''' | 15 Oct |
| CVE-2023-54173 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in bpf_event_output We received report [1] of kernel crash, which is caused by using nesting protection without disabled preemption. The bpf_event_output can be called by programs executed by bpf_prog_run_array_cg function that disabled migration but keeps preemption enabled. This can cause task to be preempted by another one inside the nesting protection and lead eventually to two tasks using same perf_sample_data buffer and cause crashes like: BUG: kernel NULL pointer dereference, address: 0000000000000001 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page ... ? perf_output_sample+0x12a/0x9a0 ? finish_task_switch.isra.0+0x81/0x280 ? perf_event_output+0x66/0xa0 ? bpf_event_output+0x13a/0x190 ? bpf_event_output_data+0x22/0x40 ? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb ? xa_load+0x87/0xe0 ? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0 ? release_sock+0x3e/0x90 ? sk_setsockopt+0x1a1/0x12f0 ? udp_pre_connect+0x36/0x50 ? inet_dgram_connect+0x93/0xa0 ? __sys_connect+0xb4/0xe0 ? udp_setsockopt+0x27/0x40 ? __pfx_udp_push_pending_frames+0x10/0x10 ? __sys_setsockopt+0xdf/0x1a0 ? __x64_sys_connect+0xf/0x20 ? do_syscall_64+0x3a/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixing this by disabling preemption in bpf_event_output. [1] https://github.com/cilium/cilium/issues/26756 | 15 Oct |
| CVE-2025-21858 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_n ---truncated--- | 15 Oct |
| CVE-2026-46560 | 7.5 high | 0.00% | openidentityplatform, openam | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, the `RADIUS` authentication module opens an unconnected datagram socket and trusts the first UDP datagram received on the client source port. The receive path does not verify the source IP and port, match the response identifier to the outstanding request, or verify the RFC 2865 `Response Authenticator`; the RFC 2869 `Message-Authenticator` is neither sent nor required. Any non-Reject/non-Challenge packet is treated as success. On a deployment with a `RADIUS` module instance enabled on a login chain, an unauthenticated network attacker can race the real server on-path or spray forged `Access-Accept` packets off-path and obtain a session for any `RADIUS`-mapped username without knowing the shared secret. Unlike CVE-2024-3596, exploitation requires no MD5 chosen-prefix forgery because no response authenticator is checked. The resulting session carries the impersonated principal's privileges. This issue is fixed in version 16.1.1. | Fri 30 Oct |
| CVE-2025-38590 | 7.5 high | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ> | Fri 30 Oct |
| CVE-2026-58085 | 7.5 high | 0.00% | freebsd | After dispatching a decrypt operation to OCF and receiving the result, the wg(4) driver failed to check whether the MAC verification step succeeded. The driver thus silently accepted packets with an invalid Poly1305 authentication tag. A remote attacker who can send UDP packets to a WireGuard endpoint, and who can guess the bounds of the receiver's replay window, can inject forged or modified transport data packets into the tunnel. A remote attacker who can intercept WireGuard packets bound for a FreeBSD host can modify the ciphertext and authenticated data without detection by the receiver. | Tue 27 Oct |
| CVE-2026-48497 | 7.5 high | 0.00% | envoyproxy, envoy | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.35.11, 1.36.7, 1.37.3, and 1.38.1, in cases where UDP DNS filter is configured with local resolution containing a name with the length of 255 octets or remote resolution for a name of 255 octets long can complete successfully, a query with such name will result in abnormal process termination. The abnormal process termination is triggered by an invalid runtime precondition that the query name is strictly less than 255 octets, contradicting DNS specification rfc1035#section-2.3.4 that the name can be 255 or less octets. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. | Sun 25 Oct |
| CVE-2026-40691 | 7.5 high | 0.00% | nlnetlabs, unbound | In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces. | 24 Oct |
| CVE-2026-67978 | 7.5 high | 0.00% | no CPE yet | An issue in the SBN UDP interface of NASA cFS v7.0.1 allows attackers to cause a Denial of Service (DoS) via transmitting a crafted SBN frame. | 23 Oct |
| CVE-2026-53070 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver | 21 Oct |
| CVE-2026-101303 | 7.5 high | 0.00% | freebsd | The IPv6 UDP send path for unconnected sockets did not apply the jail policy of rewriting a loopback destination address to the jail's primary IPv6 address. A process in a classic (non-VNET) jail can send UDP datagrams to services listening on the host's IPv6 loopback address, bypassing jail network isolation. | 20 Oct |
| CVE-2026-64175 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic. | 19 Oct |
| CVE-2026-53184 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: udp: clear skb->dev before running a sockmap verdict On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. | 19 Oct |
| CVE-2026-80998 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bnxt: ring the doorbell when SW USO exits early When a burst of packets is handed down to the driver, the driver defers the doorbell to the end by setting txr->kick_pending = 1. The normal TX path handles this, but the SW USO path can miss it if it returns early. If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and txr->kick_pending was previously set to 1, then the TX queue can stall because the driver wrote some BDs but never wrote the doorbell. The device won't know to do the TX which would generate the completion that would wake the queue back up. Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success case and check the flag on return. The added check after bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are written handling both successful USO and any early returns, which prevents the TX queue stall mentioned above. This TX queue stall was observed on a production system with a netdev TX watchdog informing about the queue stall. | 19 Oct |
| CVE-2026-43057 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback NETIF_F_IPV6_CSUM only advertises support for checksum offload of packets without IPv6 extension headers. Packets with extension headers must fall back onto software checksumming. Since TSO depends on checksum offload, those must revert to GSO. The below commit introduces that fallback. It always checks network header length. For tunneled packets, the inner header length must be checked instead. Extend the check accordingly. A special case is tunneled packets without inner IP protocol. Such as RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by transport header either, so also must revert to the software GSO path. | 15 Oct |
| CVE-2025-68241 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe The sit driver's packet transmission path calls: sit_tunnel_xmit() -> update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called to delete entries exceeding FNHE_RECLAIM_DEPTH+random. The race window is between fnhe_remove_oldest() selecting fnheX for deletion and the subsequent kfree_rcu(). During this time, the concurrent path's __mkroute_output() -> find_exception() can fetch the soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a new dst using a dst_hold(). When the original fnheX is freed via RCU, the dst reference remains permanently leaked. CPU 0 CPU 1 __mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak] This issue manifests as a device reference count leak and a warning in dmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = N Ido Schimmel provided the simple test validation method [1]. The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes(). Since rt_bind_exception() checks this field, setting it to zero prevents the stale fnhe from being reused and bound to a new dst just before it is freed. [1] ip netns add ns1 ip -n ns1 link set dev lo up ip -n ns1 address add 192.0.2.1/32 dev lo ip -n ns1 link add name dummy1 up type dummy ip -n ns1 route add 192.0.2.2/32 dev dummy1 ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2 ip -n ns1 route add 198.51.0.0/16 dev gretap1 taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & sleep 10 ip netns pids ns1 | xargs kill ip netns del ns1 | 14 Oct |
| CVE-2026-99077 | 7.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: udp: Create exceptions before socket matching Currently, when ICMP Fragmentation Needed and Redirect Message packets are locally delivered and quote a UDP packet, a FIB nexthop exception (FNHE) is only created if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the FNHE cache in order to discover the ephemeral port used by a connected UDP socket. Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the FNHE cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating a FNHE, even before trying to find a matching socket. Do that by calling ipv4_update_pmtu() and ipv4_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in a FNHE being created or updated in the cache that the attacker can observe. Pass an oif of 0, in a similar fashion to icmp_err(). This is also the oif used by the socket path for sockets that are not bound to a device. Note that this does not allow attackers to create FNHEs that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMP error that quotes an ICMP Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ipv4_sk_update_pmtu() / ipv4_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the FNHE cache of the nexthop resolved by the no socket helpers and another in the FNHE cache of the nexthop used by the socket. | Mon 26 Oct |
| CVE-2026-10652 | 7.4 high | 0.00% | zephyrproject, zephyr | Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buffer via memcpy without their own bounds check, and pass the result to the application's resolve callback. A malicious or spoofed DNS server, an on-path attacker forging UDP DNS replies, or (with mDNS/LLMNR enabled) any LAN node can craft a truncated TXT or SRV response that causes an out-of-bounds read of adjacent receive-pool memory; the disclosed stale bytes (residual contents of prior DNS packets / uninitialized pool memory) are returned to the application as TXT/SRV record contents, an information leak, and may in some configurations cross the allocation boundary and fault, causing a denial of service. The read is bounded (~64 bytes for TXT, ~6 for SRV) and read-only (no write). The fix rejects any record whose declared rdata extends past dns_msg->msg_size at the single chokepoint in dns_unpack_answer(). Affected: v4.3.0 and v4.4.0. | Sun 25 Oct |
| CVE-2026-10646 | 7.4 high | 0.00% | zephyrproject, zephyr | Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue contention, or in the documented multi-retry configuration where CONFIG_NET_SOCKETS_DNS_TIMEOUT exceeds CONFIG_NET_SOCKETS_DNS_BACKOFF_INTERVAL - the pre-fix code retries the query (goto again) without cancelling the previous one and without resetting the semaphore. The previous query slot remains active in the resolver with its callback and the stack pointer as user_data, and ai_state->dns_id is overwritten so the stale query can no longer be cancelled. A subsequent DNS response delivered over UDP and matched by its 16-bit transaction id (in dispatcher_cb()/dns_read()), or the resolver's own delayed query-timeout work, then invokes dns_resolve_cb() against the now out-of-scope stack frame, writing through the stale pointer (state->status, state->idx, state->ai_arr[], and k_sem_give()). Because the triggering response is network-delivered and its 16-bit id is spoofable/replayable by an on- or off-path attacker, this is a network-influenceable use-after-return that can corrupt reused stack memory, leading to crashes/denial of service or memory corruption. The fix cancels the timed-out query by name and type before retrying and resets the local semaphore, eliminating the stale callback path. Affected: Zephyr v4.0.0 through v4.4.0. | Sun 25 Oct |
| CVE-2026-98952 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure that the UDP header and the 4 byte PFCP header are in the linear area. When the S flag is set, pfcp_session_recv() then reads the 8 byte SEID that follows, which is not covered by the pskb_may_pull() check. A short PFCP packet with the S flag set, or one whose session header lies in a fragment, therefore makes pfcp_session_recv() read beyond the end of the packet data, and whatever it finds there is stored in the tunnel metadata that flower later classifies on. Pull up to the end of the SEID before reading it, and drop packets that are too short to contain it. Reload the header pointer afterwards since pskb_may_pull() may reallocate the skb head. Use offsetofend() rather than sizeof(struct pfcphdr_session): the structure is not packed, so its size is 16 bytes because of the alignment of the __be64 member, while the header on the wire is only 12 bytes, and valid session messages would be dropped. | 24 Oct |
| CVE-2026-92210 | 7.2 high | 0.00% | no CPE yet | NoMachine nxhtd Server-Side Request Forgery Information Disclosure Vulnerability. This vulnerability allows remote attackers to initiate arbitrary server-side requests on affected installations of NoMachine. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on UDP port 4443 by default. The issue results from the lack of proper validation of a URI prior to accessing resources. An attacker can leverage this vulnerability to initiate requests in the context of the service account. Was ZDI-CAN-31619. | Fri 30 Oct |
| CVE-2023-53726 | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: arm64: csum: Fix OoB access in IP checksum code for negative lengths Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length calls") added an early return for zero-length input, syzkaller has popped up with an example of a _negative_ length which causes an undefined shift and an out-of-bounds read: | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975 | | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 | Call trace: | dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 | show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 | __dump_stack lib/dump_stack.c:88 [inline] | dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 | print_address_description mm/kasan/report.c:351 [inline] | print_report+0x174/0x514 mm/kasan/report.c:462 | kasan_report+0xd4/0x130 mm/kasan/report.c:572 | kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 | __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31 | do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | csum_partial+0x30/0x58 lib/checksum.c:128 | gso_make_checksum include/linux/skbuff.h:4928 [inline] | __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332 | udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47 | ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119 | skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141 | __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401 | skb_gso_segment include/linux/netdevice.h:4859 [inline] | validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659 | validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709 | sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327 | __dev_xmit_skb net/core/dev.c:3805 [inline] | __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210 | dev_queue_xmit include/linux/netdevice.h:3085 [inline] | packet_xmit+0x6c/0x318 net/packet/af_packet.c:276 | packet_snd net/packet/af_packet.c:3081 [inline] | packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113 | sock_sendmsg_nosec net/socket.c:724 [inline] | sock_sendmsg net/socket.c:747 [inline] | __sys_sendto+0x3b4/0x538 net/socket.c:2144 Extend the early return to reject negative lengths as well, aligning our implementation with the generic code in lib/checksum.c | Wed 28 Oct |
| CVE-2026-116744 | 6.9 medium | 0.00% | no CPE yet | ntop nDPI through 6.0 contains an out-of-bounds read vulnerability in dissect_softether_host_fqdn() in softether.c that compares host_name using the consumed byte count instead of data length. Remote attackers can send crafted short UDP datagrams on already-classified SoftEther flows, causing strncmp to read beyond the packet payload buffer. | Mon 26 Oct |
| CVE-2026-108103 | 6.9 medium | 0.00% | no CPE yet | Open5GS through 2.8.0 contains a heap out-of-bounds read vulnerability in ogs_pfcp_parse_dropped_dl_traffic_threshold() that allows remote unauthenticated attackers to read past IE buffers via short IEs. Attackers can send PFCP Session Establishment or Modification Requests to the UPF on UDP port 8805 with DLPA and DLBY flags set, potentially crashing the UPF. | 14 Oct |
| CVE-2026-108102 | 6.9 medium | 0.00% | no CPE yet | Open5GS through 2.8.0 contains a heap out-of-bounds read vulnerability in ogs_pfcp_parse_volume_measurement() in lib/pfcp/types.c that allows remote unauthenticated attackers to read past IE buffers. Attackers can send a PFCP Session Report Request to the SMF on UDP port 8805 with a short, all-flags Volume Measurement IE, reading up to 48 bytes and potentially crashing the SMF. | 9 Oct |
| CVE-2026-92542 | 6.9 medium | 0.00% | no CPE yet | The firewall rules which mark VXLAN datagrams for encryption indiscriminately match both authentic VXLAN datagrams sent from the kernel and forged datagrams sent by user processes. Any packet sent from the host network namespace of a Linux Swarm node is encrypted with the overlay-network IPsec parameters which meets the following criteria: - UDP datagram - Destination port is the Swarm data-path port - Datagram starts with a VXLAN header for the VNI of an encrypted overlay network which any running container on the node is connected to | 8 Oct |
| CVE-2026-79981 | 6.5 medium | 0.00% | no CPE yet | The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context while only the 16-bit transaction identifier (ctx->queries[i].id, drawn with sys_rand16_get()) varies per query. RFC 5452 section 9.2 requires both to vary; with a fixed port, an off-path attacker has to guess only the identifier. The stable port is cheap to learn. Any single observed query reveals it permanently, and it can also be found by probing the ephemeral UDP range: subsys/net/ip/connection.c answers unmatched unicast UDP with an ICMP port-unreachable, so the resolver's socket is the one port in that range that stays silent. Acceptance of a reply is decided solely by get_slot_by_id() matching the transaction identifier and a CRC-16 of the queried name — the reply's source address is never checked (dispatcher_cb() does ARG_UNUSED(addr)), so forged answers need not even be spoofed to appear to come from the configured server; they only need to reach the resolver's port. An attacker with UDP reachability to the device (same LAN, Wi-Fi or mesh segment, or a globally routable device address) can therefore flood answers for a predictable query name across the 16-bit identifier space during a query window and race the legitimate server. A win makes the application resolve an attacker-chosen address, and with CONFIG_DNS_RESOLVER_CACHE enabled the forged record is retained for its attacker-chosen TTL. The attack still requires winning that race, and applications that validate TLS certificates for the resolved endpoint are largely protected. The fix draws a fresh local port before each query to a server that has nothing outstanding: dns_randomize_source_port() unregisters the dispatcher, closes and reopens the socket, and re-registers it bound to port 0 so the system selects a new port, raising the per-query guessing space from roughly 16 to roughly 31 bits. Multicast DNS and LLMNR are excluded because their ports are protocol-fixed. The behaviour is controlled by CONFIG_DNS_RESOLVER_RANDOMIZE_SOURCE_PORT (default y). | Mon 26 Oct |
| CVE-2026-12632 | 6.5 medium | 0.00% | no CPE yet | Zephyr's Precision Time Protocol receive handler ptp_msg_post_recv() in subsys/net/lib/ptp/msg.c takes the 4-bit message type straight off the wire via ptp_msg_type() (msg->header.type_major_sdo_id & 0xF, range 0-15) and uses it to index the msg_size[] table. That table only defines entries up to PTP_MSG_MANAGEMENT (0xD), giving it ARRAY_SIZE == 14. Before the fix there was no upper-bound check, so the undefined types 0xE and 0xF indexed one or two int slots past the end of the array — an out-of-bounds read of adjacent read-only data. The out-of-bounds value is then reused as a length: it gates msg_size[type] > cnt, and when it is small or negative it makes cnt - msg_size[type] a large positive budget passed to msg_tlv_post_recv(), whose TLV loop then walks the message suffix past the received bytes, performing further out-of-bounds reads and in-place byte-swap writes on memory beyond the message slab. The defect is reached directly from the network: ptp_port_event_gen() in subsys/net/lib/ptp/port.c reads a PTP frame with ptp_transport_recv() and calls ptp_msg_post_recv() with the attacker-chosen type. PTP uses UDP multicast or raw Ethernet (0x88F7) and is unauthenticated, so any host on the same link can trigger the indexing on a CONFIG_PTP-enabled node with no preconditions. The reliably reproducible impact is a denial of service (fault/crash); a limited memory-corruption path exists but depends on the build-specific value adjacent to msg_size[], which the attacker cannot tune. The fix rejects type >= ARRAY_SIZE(msg_size) with -EBADMSG before any indexing. | 22 Oct |
| CVE-2026-28810 | 6.3 medium | 0.00% | erlang, erlang\/otp | Generation of Predictable Numbers or Identifiers vulnerability in Erlang/OTP kernel (inet_res, inet_db modules) allows DNS Cache Poisoning. The built-in DNS resolver (inet_res) uses a sequential, process-global 16-bit transaction ID for UDP queries and does not implement source port randomization. Response validation relies almost entirely on this ID, making DNS cache poisoning practical for an attacker who can observe one query or predict the next ID. This conflicts with RFC 5452 recommendations for mitigating forged DNS answers. inet_res is intended for use in trusted network environments and with trusted recursive resolvers. Earlier documentation did not clearly state this deployment assumption, which could lead users to deploy the resolver in environments where spoofed DNS responses are possible. This vulnerability is associated with program files lib/kernel/src/inet_db.erl and lib/kernel/src/inet_res.erl. This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to kernel from 3.0 before 10.6.2, 10.2.7.4 and 9.2.4.11. | Mon 26 Oct |
| CVE-2026-47703 | 6.3 medium | 0.00% | adguard, adguardhome | AdGuard Home is a network-wide software for blocking ads and tracking. Prior to 0.107.75, AdGuard Home's client-triggered DoQ forwarding path to a udp:// upstream reduced backend UDP DNS state by producing dns_id=0 or txid=0 and exposed a quoted-port ICMP source-port oracle, weakening DNS response matching for forwarded queries. This issue is fixed in version 0.107.75. | 24 Oct |
| CVE-2026-57194 | 5.9 medium | 0.00% | no CPE yet | Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an out-of-bounds write in `chan_unistim` `DIALPAGE` digit handling can overflow the `phone_number` field and crash Asterisk when an attacker sends a carefully crafted incoming request packet. The `chan_unistim` module must be loaded and configured with a valid `UNISTIM UDP port` that the attacker can reach. The attacker must register as a configured `phone MAC`, or the deployment must have an equivalent `production/autoprovisioning` path that allows the client to reach the main page. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. | Wed 28 Oct |
| CVE-2026-10655 | 5.9 medium | 0.00% | zephyrproject, zephyr | The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a reference or lock. net_context objects are allocated from a fixed pool (contexts[CONFIG_NET_MAX_CONTEXTS]) and reused after close. When sntp_close_async is invoked from a different thread than the poll thread (in the in-tree consumer subsys/net/lib/config/init_clock_sntp.c, the SNTP timeout handler runs on the system workqueue while the socket service thread is blocked in poll on the same fd), the close frees and may reuse the net_context while the poll thread still has a poller node linked into the freed object, resulting in a use-after-free / object confusion of kernel poll structures. The SNTP timeout path is the normal no-response failure mode, so a network peer or off-path attacker who drops or delays the SNTP/NTP response can drive the racing close repeatedly (and periodically with NET_CONFIG_SNTP_INIT_RESYNC). The most likely consequence is a crash of the networking thread (denial of service), with potential memory corruption when the freed context slot is reallocated. The fix defers the close to the socket service thread itself via net_socket_service_close (NET_SOCKET_SERVICE_CLOSE_SOCKETS), so the same thread that polls performs the close, eliminating the race. Affected releases: v4.2.0 through v4.4.0. | Sun 25 Oct |
| CVE-2026-44621 | 5.9 medium | 0.00% | nlnetlabs, unbound | With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush. | 24 Oct |
| CVE-2026-55990 | 5.9 medium | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, when the 'dnscrypt:' clause lists more 'dnscrypt-provider-cert:' files than there are matching 'dnscrypt-secret-key:' files, Unbound fills only the matched prefix and leaves the tail slots at the '0xdb' fill that libsodium's allocator writes into every allocation. Unbound would then iterate over the number of cert files, not the actual slots, so it walks into a slot with garbage data filled with '0xdb' bytes. Any unauthenticated client that sends one UDP datagram of ≥ 68 bytes whose first 8 bytes are '0xdb' to 'dnscrypt-port' will use that garbage entry which leads to a garbage dereference killing the server. This is a silent faulty configuration that goes unnoticed until triggered with the right client query. Unbound needs to be compiled with DNSCrypt support ('--enable-dnscrypt'). | 24 Oct |
| CVE-2026-76787 | 5.9 medium | 0.00% | no CPE yet | The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. | 20 Oct |
| CVE-2026-20038 | 5.8 medium | 0.00% | no CPE yet | A vulnerability in the endpoint group (EPG) contract functionality of Cisco Nexus 9000 Series Fabric Switches in ACI Mode could allow an unauthenticated, remote attacker to bypass configured EPG contracts. This vulnerability is due to an improper control with EPG contracts. An attacker could exploit this vulnerability by sending IPv4 or IPv6 packets using UDP source and destination ports that are assigned to DHCP traffic through an affected device. A successful exploit could allow the attacker to bypass EPG contracts on the affected device. | 8 Oct |
| CVE-2026-20173 | 5.8 medium | 0.00% | no CPE yet | A vulnerability in Cisco NX-OS Software could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition. This vulnerability exists because rate limiting was improperly applied to some protocols. An attacker could exploit this vulnerability by sending a high rate of UDP or TCP connections to a data plane interface on an affected device. A successful exploit could allow the attacker to cause instability to various routing and control plane protocols through some packet loss and temporary disruptions, causing a DoS condition. This DoS condition will clear without manual intervention soon after the high rate of traffic is stopped. | 8 Oct |
| CVE-2026-50252 | 5.7 medium | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.4.22 up to and including 1.25.1, UDP source port is randomized and intended to serve as a secret value that increases the entropy of DNS transactions. When resolver load balancing policies depend on the source port while their outcome is revealed this secrecy is undermined. The vulnerability arises when the load balancing policy is consistent with respect to the incoming source UDP port and IP address while heavily depending on the incoming source UDP port as a randomization source. When the SO_REUSEPORT configuration option is enabled ('so-reuseport: yes') in Unbound (by default), it meets these conditions, making it vulnerable for DNS cache poisoning attacks. Upon startup, Unbound randomly partitions the available UDP source port space into disjoint subsets of (almost) equal size, assigning each subset to a specific worker thread. When an incoming DNS query is received, the kernel’s SO_REUSEPORT load balancing mechanism deterministically assigns the query to a socket associated with a particular thread. All outgoing DNS queries generated during the resolution of that request use source ports selected exclusively from the port subset assigned to the corresponding thread. Since these port subsets are disjoint across threads, the source port observed in a resolver’s outgoing query to an authoritative name server serves as a reliable indicator of the worker thread that processed the original client query. A malicious actor can acquire the mapping between incoming UDP source ports (for a given fixed source IP address) and Unbound worker threads and leverage it to conduct DNS cache poisoning attacks by effectively lowering the random port population per thread. | 24 Oct |
| CVE-2026-79980 | 5.6 medium | 0.00% | no CPE yet | The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier. | Mon 26 Oct |
| CVE-2026-98098 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | Wed 28 Oct |
Download these 223 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.