Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-114654 | 6.9 medium | 0.00% | no CPE yet | A numeric-type conversion flaw in the BSON handling library of the MongoDB C# Driver allows an out-of-range binary subtype value supplied through untrusted textual input to bypass the library's binary-element integrity checks. When such a value is later encoded, it is narrowed to a smaller wire representation, producing binary elements that misdeclare their type or length. An unauthenticated party able to supply text parsed by an affected application can cause it to emit and persist malformed binary data, which subsequent readers either reject with an error or silently interpret as shorter than the data that was validated. | Fri 23 Oct |
| CVE-2026-102471 | 6.9 medium | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) characters in user-supplied email header names and values before writing them into the SMTP DATA section. A CR/LF sequence embedded in a name or value passed to MailMessage.addHeader(), MailMessage.setHeaders(), MailAttachment.addHeader(), or MailAttachment.setHeaders() is written verbatim to the wire, allowing an attacker to inject arbitrary headers (e.g. Bcc, Reply-To, Content-Type) or prepend body content to the outgoing message. The same weakness affects MIME part metadata set via MailAttachment.setContentType(), setDisposition(), setDescription(), and setContentId(), which are written directly into MIME part headers without validation. A secondary weakness in Utils.mustEncode(char) additionally allows a bare LF in a From display-name to bypass Q-encoding and reach the wire unchanged. An unauthenticated attacker who can control any header name, header value, or attachment metadata field passed to the mail client (for example via a web form or API that feeds into MailMessage) can exploit this to redirect email copies, spoof headers, or tamper with message structure. The impacted component is io.vertx:vertx-mail-client. | 20 Oct |
| CVE-2026-112008 | 6.9 medium | 0.00% | no CPE yet | libmng through 2.0.3 contains a heap-based buffer overflow vulnerability in mng_read_ordr() that allows attackers to corrupt heap memory because ORDR entry buffers are sized by 5-byte on-wire records instead of 8-byte in-memory entries. Attackers can supply a crafted MNG file with MHDR, DHDR and a multi-record ORDR chunk to applications calling mng_read or mng_readdisplay, writing attacker-controlled data past the allocation and crashing the application. | 19 Oct |
| CVE-2025-11538 | 6.8 medium | 0.00% | no CPE yet | A vulnerability exists in Keycloak's server distribution where enabling debug mode (--debug <port>) insecurely defaults to binding the Java Debug Wire Protocol (JDWP) port to all network interfaces (0.0.0.0). This exposes the debug port to the local network, allowing an attacker on the same network segment to attach a remote debugger and achieve remote code execution within the Keycloak Java virtual machine. | 18 Oct |
| CVE-2026-12632 | 6.5 medium | 0.00% | no CPE yet | Zephyr's Precision Time Protocol receive handler ptp_msg_post_recv() in subsys/net/lib/ptp/msg.c takes the 4-bit message type straight off the wire via ptp_msg_type() (msg->header.type_major_sdo_id & 0xF, range 0-15) and uses it to index the msg_size[] table. That table only defines entries up to PTP_MSG_MANAGEMENT (0xD), giving it ARRAY_SIZE == 14. Before the fix there was no upper-bound check, so the undefined types 0xE and 0xF indexed one or two int slots past the end of the array — an out-of-bounds read of adjacent read-only data. The out-of-bounds value is then reused as a length: it gates msg_size[type] > cnt, and when it is small or negative it makes cnt - msg_size[type] a large positive budget passed to msg_tlv_post_recv(), whose TLV loop then walks the message suffix past the received bytes, performing further out-of-bounds reads and in-place byte-swap writes on memory beyond the message slab. The defect is reached directly from the network: ptp_port_event_gen() in subsys/net/lib/ptp/port.c reads a PTP frame with ptp_transport_recv() and calls ptp_msg_post_recv() with the attacker-chosen type. PTP uses UDP multicast or raw Ethernet (0x88F7) and is unauthenticated, so any host on the same link can trigger the indexing on a CONFIG_PTP-enabled node with no preconditions. The reliably reproducible impact is a denial of service (fault/crash); a limited memory-corruption path exists but depends on the build-specific value adjacent to msg_size[], which the attacker cannot tune. The fix rejects type >= ARRAY_SIZE(msg_size) with -EBADMSG before any indexing. | Thu 22 Oct |
| CVE-2026-105754 | 6.5 medium | 0.00% | vllm | vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0. | 8 Oct |
| CVE-2026-43966 | 6.3 medium | 0.00% | ninenines, cowlib | Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in ninenines cowlib allows HTTP response splitting via non-VCHAR bytes in structured-fields string values. cow_http_struct_hd:escape_string/2 in cowlib only escapes \ and ", passing all other bytes through verbatim. This creates an encoder/decoder asymmetry: the matching parser accepts only printable ASCII (0x20–0x7E, excluding " and \), but the encoder emits any byte including CR and LF. An application that builds a structured HTTP header via cow_http_struct_hd:item/1 (or a higher-level wrapper such as cow_http_hd:wt_protocol/1) from attacker-controlled input can have \r\n injected into the serialized header value. Once on the wire, the injected CRLF terminates the current header and any following bytes are interpreted as a new header, enabling HTTP response splitting. This issue affects cowlib: from 2.9.0 onward. | 14 Oct |
| CVE-2026-57082 | 5.9 medium | 0.00% | no CPE yet | Net::BitTorrent versions before 2.1.0 for Perl generate the MSE Diffie-Hellman private key with a non-cryptographic PRNG. The MSE (Message Stream Encryption) handshake derives its 160-bit Diffie-Hellman private key from Perl's rand(), a non-cryptographic drand48-class generator seeded once per process, in KeyExchange.pm. The shared secret and the RC4 keys derived from it (the SHA-1 of "keyA" or "keyB", the shared secret, and the infohash) therefore depend entirely on a predictable PRNG. The same handshake sends, in cleartext, random padding drawn from the same rand() sequence in _random_pad, immediately after the public key and the private-key draw. A passive observer of the handshake recovers the PRNG state from the cleartext padding, reconstructs the private key, computes the shared secret from the peer's public key on the wire, derives the RC4 keys, and decrypts the connection, defeating the passive-observation obfuscation MSE provides. | Sun 25 Oct |
| CVE-2025-1218 | 5.9 medium | 0.00% | php | The mysqlnd wire protocol parser reads fields out of server packets before checking that the packet still holds enough bytes for them. A malicious or compromised MySQL server can send a truncated packet and make the client read past the end of the packet buffer, which is undefined behaviour and can crash the process. | Fri 23 Oct |
| CVE-2026-106435 | 5.9 medium | 0.00% | mongodb, python_driver | The MongoDB Python Driver's binary accelerator can read outside a buffer when an application decodes malformed BSON containing a truncated regular-expression element without a trailing NUL byte. An actor who can supply BSON to the documented decode or decode_all API can cause the application process to terminate when the C extension is loaded. The driver's normal database wire-protocol path does not reach this code. | 15 Oct |
| CVE-2026-79980 | 5.6 medium | 0.00% | no CPE yet | The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously joined — therefore retains a valid token for the device's whole uptime, and can predict the identifiers of later exchanges, without having to observe the unicast renew traffic or race the legitimate server. A forged reply that passes those checks has effect regardless of client state, because dhcpv4_parse_options() applies its side effects before the state machine gate in dhcpv4_handle_reply(): the router option calls net_if_ipv4_set_gw() and the DNS option calls dns_resolve_reconfigure(). A single accepted datagram can thus repoint the device's default gateway and resolvers at attacker-controlled addresses, redirecting its traffic; during RENEWING or REBINDING a forged DHCPACK re-binds the lease with attacker-chosen parameters and a forged DHCPNAK removes the address and restarts configuration. The fix draws a fresh sys_rand32_get() value at each point where a transaction begins — entering SELECTING, RENEWING and REBINDING, and at the INIT/INIT-REBOOT entry taken when an interface with a lease goes down — while REQUESTING and DECLINE keep the identifier of the exchange they belong to, as RFC 2131 requires. As a side effect the client also no longer discards a slow server's offer after retransmitting a discover, and the initial-discover backoff now draws its own randomness instead of deriving it from the identifier. | Mon 26 Oct |
| CVE-2026-63868 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: garp: fix unsigned integer underflow in garp_pdu_parse_attr The receive-side GARP attribute parser computes dlen with reversed operands: dlen = sizeof(*ga) - ga->len; ga->len is the on-wire attribute length and includes the GARP attribute header. For normal attributes with data, ga->len is larger than sizeof(*ga), so the subtraction underflows in unsigned arithmetic. The resulting value is later passed to garp_attr_lookup(), whose length argument is u8. After truncation, the parsed data length usually no longer matches the length stored for locally registered attributes, so received Join/Leave events are ignored. This breaks the GARP receive path for common attributes, such as GVRP VLAN registration attributes. Compute the data length as the attribute length minus the header length. | Mon 26 Oct |
| CVE-2025-39703 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: net, hsr: reject HSR frame if skb can't hold tag Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR fr ---truncated--- | 19 Oct |
| CVE-2026-43094 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ixgbevf: add missing negotiate_features op to Hyper-V ops table Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") added the .negotiate_features callback to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL on Hyper-V VMs. During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(), which unconditionally dereferences hw->mac.ops.negotiate_features(). On Hyper-V this results in a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...] Workqueue: events work_for_cpu_fn RIP: 0010:0x0 [...] Call Trace: ixgbevf_negotiate_api+0x66/0x160 [ixgbevf] ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf] ixgbevf_probe+0x20f/0x4a0 [ixgbevf] local_pci_probe+0x50/0xa0 work_for_cpu_fn+0x1a/0x30 [...] Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP gracefully. | 15 Oct |
| CVE-2026-43080 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32) writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1) It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP encapsulation, and l2tp_xmit_core doesn't check for overflows when it assigns the UDP length field. The value gets trimmed to 16 bites. Add an overflow check that drops oversized packets and avoids sending packets with trimmed UDP length to the wire. syzbot's stack trace (with my patch applied): len >= 65536u WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957 Modules linked in: CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline] RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline] RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327 Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f RSP: 0018:ffffc90003d67878 EFLAGS: 00010293 RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000 RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004 R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900 R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000 FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0 Call Trace: <TASK> pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x503/0x550 net/socket.c:1195 do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1 vfs_writev+0x33c/0x990 fs/read_write.c:1059 do_writev+0x154/0x2e0 fs/read_write.c:1105 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f636479c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629 RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0 </TASK> [1]: https://lore.kernel.org/all/[email protected]/ | 15 Oct |
| CVE-2024-49949 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated--- | 15 Oct |
| CVE-2026-93011 | 5.3 medium | — | red hat, red hat ceph storage 9, red hat enterprise linux 10, red hat enterprise linux 6 | A flaw was found in dnsmasq. After a reduction of internal domain-name buffer sizes, the DNSSEC validator can write a few bytes past a name buffer when converting names to and from DNS wire format. An attacker who can cause the server to validate a crafted DNSSEC response may overwrite a small amount of adjacent heap metadata. DNSSEC support is not compiled in by default and must also be enabled at runtime. | 5 h ago |
| CVE-2026-56694 | 5.3 medium | 0.00% | no CPE yet | NanoClaw before 2.1.0 contains a privilege escalation vulnerability in the channel-registration approval flow where handleChannelApprovalResponse fails to validate admin privileges over target agent groups. Scoped admins can submit forged or stale connect callback values to wire messaging channels into out-of-scope agent groups, exposing unauthorized groups to unapproved channels and enabling unauthorized observation or control of restricted agent group activity. | Mon 26 Oct |
| CVE-2026-54270 | 5.3 medium | 0.00% | protobufjs_project, protobufjs | protobufjs compiles protobuf definitions into JavaScript (JS) functions. From 8.2.0 to 8.4.2, protobufjs preserved unknown wire elements in message.$unknowns and did not provide a decode-time option to discard unknown fields before retaining them. A crafted protobuf payload containing many unknown fields could therefore cause a decoded message to retain substantially more memory than the input size would suggest, even when unknown-field round-tripping is not needed. protobufjs 8.5.0 added the relevant decode-time options, allowing applications that decode untrusted protobuf data to disable unknown-field retention during decode. protobufjs 8.6.2 flips the default so unknown fields are discarded unless explicitly opted into. | Sun 25 Oct |
| CVE-2026-55737 | 5.1 medium | 0.00% | erlang, erlang\/otp, erts | Signed to Unsigned Conversion Error and Out-of-bounds Write vulnerability in Erlang OTP erts allows an attacker who can supply a crafted Erlang external term format (ETF) binary to binary_to_term/1 to corrupt the BEAM heap pointer and crash the virtual machine. When decoding a LARGE_TUPLE_EXT term, the validation pass decoded_size() in erts/emulator/beam/external.c reads the 32-bit arity field as unsigned (get_uint32()), while the decode pass dec_term() reads the same field as a signed 32-bit integer (get_int32()) into an int. An arity wire value of 0x80000000 passes validation as 2147483648 but decodes as -2147483648, so the subsequent hp += n moves the heap allocation pointer backward. Neither pass enforces the runtime tuple-arity limit MAX_ARITYVAL. The result is an out-of-bounds heap write; in practice the VM detects an impossible heap size and aborts, denying service. The required padding is large when uncompressed but the compressed-ETF envelope shrinks it to a small payload on the wire. This issue affects OTP from OTP 25.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to erts from 13.0 before 17.0.4, 16.4.0.4 and 15.2.7.11. | Sat 24 Oct |
| CVE-2026-56416 | 4.8 medium | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound up to and including version 1.25.1, when the validator builds the canonical RDATA form for an RRSIG-covered PX/RP/MINFO/SOA RRset, it computes the address of the second embedded domain name as 'datstart + dname_valid(datstart, ...)' and passes it straight to 'query_dname_tolower()' without checking that a second name is actually present in the RDATA. The wire-format parser accepts multi-dname RRs whose RDATA ends after the first name, so an attacker who runs a DNSSEC-signed authoritative server can deliver a record with an absent second domain name (e.g. SOA record) and cause 'query_dname_tolower()' to walk label-by-label through stale bytes in the per-worker 'env->scratch_buffer', past the end of that heap allocation if 'msg-buffer-size' has been lowered from the default. This leads to heap buffer overflow and on a release build the outcome relies heavily on the contents of the buffer tail and the adjacent heap chunk. | Sat 24 Oct |
| CVE-2026-19742 | 3.7 low | 0.00% | no CPE yet | The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests entirely on it. Depending on the platform, sys_rand_get() resolves either to a hardware entropy device or, on boards whose entropy driver sets CONFIG_ENTROPY_NEEDS_PRNG, to the non-cryptographic xoshiro128++ generator in subsys/random/random_xoshiro128.c, which keeps a single global 128-bit state shared with every other sys_rand_get() consumer. Many of those consumers put their output directly on the wire (ephemeral source ports, DNS query IDs, CoAP message IDs and tokens, DHCPv6 transaction IDs, WebSocket masking keys), and the xoshiro state transition is invertible, so an observer of a device's traffic can recover the generator state and reconstruct the IID secret key. Additionally, with the entropy-device backend sys_rand_get() silently falls back to k_cycle_get_32() samples when the entropy driver fails, and returns no error, so the key could be derived from the cycle counter without the caller noticing. With the key known, stable IIDs become directly computable for any prefix (the remaining HMAC inputs — prefix, interface index, interface name, DAD counter — are guessable), and temporary IIDs become linkable after a cheap search over the mixed-in k_uptime_get_32() value. This defeats the properties both features exist to provide: an attacker can track a device across networks and prefixes, and can predict its address inside a /64 without scanning, removing the usual barrier to directly targeting the host. There is no memory-safety, integrity, or availability impact. The fix generates the key with sys_csrand_get() and aborts IID generation with -EIO when no cryptographic randomness is available, instead of silently deriving addresses from a predictable key. Both CONFIG_NET_IPV6_IID_STABLE and CONFIG_NET_IPV6_PE are experimental and disabled by default; builds using CONFIG_TEST_RANDOM_GENERATOR remain predictable by design, as sys_csrand_get() is deliberately routed back to the test generator there. | Mon 26 Oct |
| CVE-2026-54478 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.18.0 up to and including 1.25.1, when Unbound listens on a 'proxy-protocol-port' interface with 'answer-cookie: yes', the RFC 9018 server-cookie SipHash is computed over the proxy's wire address instead of the PROXYv2-declared client. One server cookie obtained through a given proxy node therefore validates for every PROXYv2-declared source behind that node. On a UDP+proxy-protocol front, an off-path attacker can harvest one cookie with a single legitimate query, then replay it under any spoofed source and pass DNS Cookie checks that were deployed to defeat this in the first place. | Sat 24 Oct |
| CVE-2026-114349 | unscored | — | no CPE yet | When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size. Impact: An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. | 6 h ago |
| CVE-2026-111108 | unscored | — | no CPE yet | Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field. Impact: Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large= array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization.. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). | 23 h ago |
| CVE-2026-99110 | unscored | — | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). | Wed 28 Oct |
| CVE-2026-78334 | unscored | 0.00% | no CPE yet | Missing authentication in the streaming RPC path of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to bypass server authentication and inject or deliver streaming frames, when a server is configured with an Authenticator. Root Cause: When authentication is configured, streaming RPC frames are consumed directly by the streaming parser (ParseStreamingMessage) and never pass through InputMessenger's authentication hook, so an unauthenticated peer can exchange frames without being authenticated. In addition, a server-accepted stream is bound lazily to the first frame that happens to carry its id, so a stream could accept a frame carrying its id from a socket other than the socket that created the stream. Affected Scenarios: A bRPC server configured with authentication that serves streaming RPC from an untrusted network, or a deployment where a foreign connection can impersonate a stream by id, can be made to accept unauthorized streaming frames. How to Fix: Upgrade bRPC to 1.18.0, which fixes this issue, or apply the patch in PR https://github.com/apache/brpc/pull/3481. Note: The fix rejects streaming frames on server sockets when configured authentication has not completed, and keeps server-accepted streams bound to the socket of their creating RPC and rejects frames arriving from another socket. Authenticated streaming RPC behavior and the wire format are unchanged; only unauthenticated or foreign-socket frames are now rejected. | Mon 26 Oct |
| CVE-2026-78066 | unscored | 0.00% | no CPE yet | Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process. Root Cause: 1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB. 2) The AMF string readers allocate the declared length before the bytes are actually available. 3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing. 4) The sofa-pbrpc parser does not bound meta_size. 5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process. Affected Scenarios: Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients. How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3476 Note: After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size). | Mon 26 Oct |
| CVE-2026-82425 | unscored | 0.00% | no CPE yet | A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. | Mon 26 Oct |
| CVE-2026-99007 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged. | Fri 23 Oct |
| CVE-2026-97965 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | 21 Oct |
| CVE-2026-97559 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond what a u16 can hold. A wraparound is reached with 863 ACEs. After the wraparound, ndacl_ptr->size becomes meaningless and the offset will point anywhere in the ACE array. As a result, we will see corruption of the DACL, which then gets sent to the server. This is not an out-of-bounds write as the allocation now covers the worst-case expansion, so writes will always go into the buffer. Adjust the code to use a u32 internally and return -EOVERFLOW in the overflow case. The operation must be refused, because a DACL can only hold 2^16-1 bytes on the wire and larger DACLs cannot be represented. set_chmod_dacl() carries the same pattern and is fixed the same way. It only wraps once the source DACL comes within roughly 380 bytes of the 64K ceiling, but the failure mode is identical. | 21 Oct |
| CVE-2026-89666 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD carrying an atime or mtime whose nseconds field is out of range. The value is well-formed on the wire and decodes cleanly into a valid uint32, but it is not a valid timespec64: tv_nsec must be less than NSEC_PER_SEC. Nothing in the setattr path clamps it. notify_change() runs the time through timestamp_truncate(), which does not reduce tv_nsec below NSEC_PER_SEC when the filesystem supports nanosecond granularity (s_time_gran == 1), and the inode atime/mtime setters store it verbatim (only ctime is normalized, via inode_set_ctime_to_ts()). The un-normalized value then corrupts on-disk metadata: ext4's ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which overflows the 32-bit extra field and clobbers the seconds-epoch bits, so the stored seconds (and thus the year) are wrong on read-back. XFS with bigtime mis-stores the timestamp for the same reason. Validate the client-supplied atime/mtime in the proc handlers and return NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL for SETATTR and describes it as the error for a value the server 'can not store ... in its own representation'; the client maps it to EINVAL. Checking in the proc handlers, rather than in nfsd_setattr(), keeps the rejection in front of object creation. The create operations create the object before nfsd_create_setattr() runs, so a late failure would leave the new object behind and turn a non-idempotent request into a namespace change that reports failure. The check is therefore done up front, for the create operations before the object is created. tv_nsec is a long, so the comparison casts it to unsigned long (the same width) rather than to u32, matching timespec64_valid(). A u32 cast would truncate on 64-bit; the unsigned long cast also rejects a value that became negative when an out-of-range u32 wire nseconds was assigned to a 32-bit long. Only client-supplied times are checked: SET_TO_SERVER_TIME requests carry no client value. The sattrguard3 ctime is deliberately left alone: an out-of-range guard simply never matches the object's ctime and yields NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the protocol-correct outcome rather than rejecting the request. | 21 Oct |
| CVE-2026-89539 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: reject duplicate CREDS_VALUE options gssx_dec_option_array() walks the wire-supplied option array and, for every entry whose name matches CREDS_VALUE, calls gssx_dec_linux_creds() on the same struct svc_cred. That helper unconditionally installs a fresh groups_alloc() result into creds->cr_group_info without releasing whatever pointer was already there: for (i = 0; i < count; i++) { ... decode name ... if (length == sizeof(CREDS_VALUE) && memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) { err = gssx_dec_linux_creds(xdr, creds); ... } } A reply that carries two CREDS_VALUE entries therefore overwrites cr_group_info on the second iteration and orphans the group_info allocated by the first call. The earlier free_creds path only releases the last cr_group_info via free_svc_cred(), so the first allocation's refcount stays at one and its kvmalloc-backed storage is leaked. No in-tree caller of gssp_accept_sec_context_upcall() expects more than one CREDS_VALUE per reply. Fix by tracking whether a CREDS_VALUE option has already been decoded and returning -EINVAL on any subsequent match, so the free_creds path releases the single group_info that was installed. | 21 Oct |
| CVE-2026-97563 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: reject out-of-bounds DataOffset in CIFSSMBRead() The SMB1 synchronous read helper CIFSSMBRead() validates the server's DataLength against CIFSMaxBufSize and the caller's count, but never validates DataOffset. The copy source is formed as &pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset) and memcpy()'d for DataLength bytes with no check that the [DataOffset, DataOffset + DataLength) range lies within the response actually received from the server. A malicious or compromised SMB1 server can return a response carrying an in-range DataLength and a large DataOffset, driving the source pointer past the end of the response buffer. The memcpy() then copies adjacent kernel heap into the caller's read buffer (information disclosure), or reads unmapped memory and oopses (denial of service). SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Both DataOffset and the received response length recorded in rsp_iov.iov_len are relative to the start of the SMB header, so reject the response unless DataOffset + DataLength fits within that length, using overflow-safe arithmetic, before forming the source pointer. The response length has been validated by the previous patch, so the DataOffset and DataLength fields can be read safely here. While here, make data_length unsigned. It holds a length derived from unsigned on-the-wire fields and is only ever compared against unsigned quantities; print it with %u accordingly, and add __func__ to the cifs_dbg() calls in this function. | 19 Oct |
| CVE-2026-90058 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by [email protected]. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit refill loop to ~1M iterations per packet with quantum=1, which completes in a few milliseconds well under the demonstrated softlockup threshold (~10^9 iterations). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y). - Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]). - Add a class with a tiny quantum of 1 and send one small packet; the deficit loop spins billions of times under the qdisc lock and trips the softlockup detector (panic with kernel.softlockup_panic=1). - Reachable as root or from an unprivileged user in a fresh user+net namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN. | 19 Oct |
| CVE-2026-90040 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated--- | 19 Oct |
| CVE-2026-89722 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bytes from the kernfs write buffer regardless of how many bytes userspace wrote: if (count != 1 && count != 2 && count != 4) return -EINVAL; return pci_legacy_write(bus, off, *(u32 *)buf, count); kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1), so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and the unconditional u32 load reads up to 2 bytes past the end of the allocation, which KASAN reports as a slab-out-of-bounds read. Similarly, a 2-byte write overreads by 1 byte. Thus, read only the number of bytes requested using get_unaligned_le16() and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the buffer as little-endian to match the byte ordering of PCI I/O port space. The PowerPC implementation previously compensated for the generic code's native-endian 32-bit load by shifting the value into place for the 1 and 2 byte cases. The shifts were only correct on big-endian kernels. On little-endian PowerPC (POWER8 and later), they extracted the wrong bytes, so a 1-byte write wrote an out-of-bounds byte instead of the requested value. On big-endian, the native load also caused out_le16() and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte writes. The little-endian helpers resolve both issues, so the shifts are removed. No changes are needed for the Alpha platform. The legacy_io file is root-only and exists only on Alpha and PowerPC, the two architectures that define HAVE_PCI_LEGACY. | 19 Oct |
| CVE-2026-89529 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject oversized Read segments at decode time The RPC/RDMA Read list decoder stores wire-supplied segment lengths without validation. xdr_count_read_segments() checks 4-byte alignment for non-zero position values but does not cap the segment length. An oversized rs_length reaches svc_rdma_build_read_segment(), which derives nr_bvec from it and can drive a large dynamic bvec allocation before verifying that enough rq_pages remain. If the post-allocation page-overrun guard fires, the freshly acquired rw context is not returned, leaking the resource. Reject any segment whose length exceeds the receive context's page budget during Read list decoding, consistent with how xdr_check_write_chunk() bounds Write segment counts against rc_maxpages. Also return the rw context on the existing post-allocation overrun path in svc_rdma_build_read_segment(), keeping that defensive guard balanced. | 19 Oct |
| CVE-2026-80791 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: zero the AUTH_RECEIVE response buffer nvmet_execute_auth_receive() allocates the response buffer with kmalloc() sized by the host-supplied AUTH_RECEIVE allocation length, but the DH-HMAC-CHAP builders write only a fixed-size message into it. The full allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a remote initiator receives the bytes past the built message -- up to nearly a page of uninitialized slab -- during the pre-authentication handshake. Allocate the buffer with kzalloc() so the unwritten tail is zeroed before it is sent; conforming responses are unaffected. | 19 Oct |
| CVE-2026-80789 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies. | 19 Oct |
| CVE-2025-68200 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Add bpf_prog_run_data_pointers() syzbot found that cls_bpf_classify() is able to change tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop(). WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline] WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214 struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block"), which added a wrong interaction with db58ba459202 ("bpf: wire in data and data_end for cls_act_bpf"). drop_reason was added later. Add bpf_prog_run_data_pointers() helper to save/restore the net_sched storage colliding with BPF data_meta/data_end. | 14 Oct |
| CVE-2026-74659 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. | 14 Oct |
143 of 143 · Previous
Download these 143 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.