Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2022-49106 | unscored | — | linux | In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances. | 9 h ago |
| CVE-2023-53712 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9317/1: kexec: Make smp stop calls asynchronous If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8039c ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interrupt Make the smp call for machine_crash_nonpanic_core() asynchronous. | Wed 28 Oct |
| CVE-2026-98893 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate SENSOR_UPDATE payload size SENSOR_UPDATE carries one or more sensor readings after the fixed notification header. The parser derives the expected reading count from the sensor description, but it did not verify that the received payload contains those entries before parsing them. Reject truncated update notifications before reading the variable array. | Mon 26 Oct |
| CVE-2026-98892 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size BASE_ERROR_EVENT carries a variable number of message reports, with the count encoded in error_status. The notification parser used that count without checking whether the received payload contained all reported entries. Reject truncated payloads before copying the report array. | Mon 26 Oct |
| CVE-2026-98877 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4. | Mon 26 Oct |
| CVE-2026-99028 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop In the dmaengine path the driver pre-submits RX buffers and holds in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync() aborts these descriptors without running their callbacks, and the driver then frees only the ring shells, leaking every SKB still owned by the engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted per channel, the mapping leak can eventually exhaust a limited IOMMU aperture. Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a slot that still owns a live, DMA-mapped buffer, and on stop unmap and free every such buffer. axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on each completion, so it can race axienet_stop(): a completion may submit a fresh buffer after dmaengine_terminate_sync() has returned, leaving the channel armed with a buffer the teardown then frees while the engine may still write into it (dma_release_channel() does not stop it either). Add a lock that axienet_dma_rx_cb() holds across the @stopping check and the resubmit, and axienet_stop() holds to set @stopping before terminating. Once @stopping is set no callback can arm a new buffer, and any armed just before is aborted by the terminate, so teardown only frees buffers the engine no longer owns. | 23 Oct |
| CVE-2026-98928 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE. | 23 Oct |
| CVE-2026-93083 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind TX receiver mailbox setup failure mailbox_chan_setup() can request an additional unidirectional TX receiver channel after successfully acquiring the primary channel. If that second request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts. | 21 Oct |
| CVE-2025-40060 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: coresight: trbe: Return NULL pointer for allocation failures When the TRBE driver fails to allocate a buffer, it currently returns the error code "-ENOMEM". However, the caller etm_setup_aux() only checks for a NULL pointer, so it misses the error. As a result, the driver continues and eventually causes a kernel panic. Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on allocation failures. This allows that the callers can properly handle the failure. | 19 Oct |
| CVE-2025-40102 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Prevent access to vCPU events before init Another day, another syzkaller bug. KVM erroneously allows userspace to pend vCPU events for a vCPU that hasn't been initialized yet, leading to KVM interpreting a bunch of uninitialized garbage for routing / injecting the exception. In one case the injection code and the hyp disagree on whether the vCPU has a 32bit EL1 and put the vCPU into an illegal mode for AArch64, tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000) Reject the ioctls outright as no sane VMM would call these before KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been thrown away by the eventual reset of the vCPU's state. | 19 Oct |
| CVE-2025-40226 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Account for failed debug initialization When the SCMI debug subsystem fails to initialize, the related debug root will be missing, and the underlying descriptor will be NULL. Handle this fault condition in the SCMI debug helpers that maintain metrics counters. | 19 Oct |
| CVE-2026-98803 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | 19 Oct |
| CVE-2026-98797 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: cap skb->queue_mapping when the tx queue is picked skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit() cleared the flag before sch_handle_egress() and only read it afterwards, so the flag was not confined to the xmit that set it: a nested xmit (mirred redirect or mirror, or a drop after skbedit) could set the flag and the outer xmit would consume it for an skb that never went through skbedit. A forwarded packet still carries the ingress NIC's rx_queue + 1 in skb->queue_mapping, so the outer device then indexes its tx queue state with that stale value. Taprio's child array q->qdiscs[] is sized to the device's queue count, so taprio_enqueue() indexes past its allocation and dereferences the result as a struct Qdisc *. We (ab)use the skb->nf_skip_egress which means "skip netfilter egress for this packet" to tag to "am I in tc egress?". Despite the overload I dont see it as a conflict since the marker is set only around the single sch_handle_egress() call and ingress path is guarded by tc_at_ingress. I will send a followup(net-next) patch once this hits net-next to rename the skb->nf_skip_egress bit/flag to skb->skip_egress Arm the flag only from the egress classifier that can use it: raise skip_txqueue from tcf_skbedit_act() only when it runs inside sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc classifier runs in q->enqueue(), after the tx queue has been picked, so a mapping it sets cannot affect the current packet; arming the flag there only pollutes it for a later xmit. Then own the flag for the xmit frame the egress hook runs in: save the incoming value and clear it just before sch_handle_egress(), and restore it after the hook - on the consumed (drop) path, or, in the same call that reads it, on the surviving path. The save and the restores stay inside the egress_needed_key static branch, so a packet pays for them only when egress hooks are active (2f1e85b1aee4). Store the value netdev_cap_txqueue() selected back into skb->queue_mapping in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so the skip_txqueue path never hands a later reader on the xmit path a mapping the device cannot serve. A store made still later in the same frame, by a tc BPF program attached to a transmit qdisc, is outside this path and is not re-capped; a separate followup will resolve that path. netdev_xmit_skip_txqueue() returns the previous flag value so the save-and-clear is one call, and a no-op stub is provided when CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so skb_at_tc_egress() is valid whenever the egress path is built. A local user in a network namespace can redirect a packet from a device with more TX queues to one with fewer after setting a mapping valid only on the larger device. That reaches these reads and, under KASAN, faults with "slab-out-of-bounds in taprio_enqueue". Conditions to recreate the bug: the report's own trigger is a local user with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed. With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y, CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y, CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb (2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb (num_tc 1, queues 2@0) and clsact on all three; then add an egress matchall filter on every device. On qa: "action skbedit queue_mapping 2 pipe action mirred egress redirect dev qb". On qb: "action mirred egress mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one packet out qa. qc's skbedit sets the flag while qb's outer xmit is in flight; without the fix qb consumes it and reads its two-entry taprio child array with the forwarded packet's stale mapping. A qc whose skb ---truncated--- | 19 Oct |
| CVE-2026-98637 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE, which is left set. Later vCPUs on that VM then skip the SVE setup and register with a NULL sve_state, which the guest's first FP access hands to sve_load_state(). Return the error without touching vcpu_features. | 19 Oct |
| CVE-2026-98551 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing. | 19 Oct |
| CVE-2026-98429 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep EQ resources alive while IRQ is registered The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was registered before that state was initialized, while teardown released the buffer before free_irq() synchronized the handler. Initialize the EQ without arming it, register the IRQ, and then arm it. Reverse the resource order during teardown by freeing the IRQ before destroying the EQ. | 19 Oct |
| CVE-2026-98363 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted any larger value from the SCP firmware. The shared-memory reply only holds MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB). The missing upper bound dates back to the original SCPI DVFS support. Reject zero and out-of-range counts in one check and return -EINVAL. | 19 Oct |
| CVE-2026-98286 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_monitor teardown paths (net_dm_trace_off_set(), net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set() and net_dm_hw_monitor_start()), per-CPU timers are stopped using timer_delete_sync() followed by cancel_work_sync(). However, there is a circular dependency between send_timer and dm_alert_work: 1) sched_send_work() (timer callback) schedules dm_alert_work. 2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data() or net_dm_hw_reset_per_cpu_data(). 3) If memory allocation fails under memory pressure in the reset function, it re-arms the timer via mod_timer(&data->send_timer, ...). If dm_alert_work is running concurrently while timer_delete_sync() executes on another CPU, an allocation failure in the worker will re-arm the timer after timer_delete_sync() has already returned. Once cancel_work_sync() completes and module_put() is called, the timer remains active in the timer wheel. If the module is then unloaded, the timer will fire and execute sched_send_work() in freed memory, triggering a kernel panic / use-after-free. Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees that any in-flight timer handler has finished and prevents subsequent re-arming attempts from running workers from succeeding. When monitoring is restarted later, timer_setup() is invoked, which cleanly re-initializes the timer. | 19 Oct |
| CVE-2026-98212 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool. | 19 Oct |
| CVE-2026-98036 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve special fields in recycled rhtab elements rhtab_map_update_elem() initializes special fields after obtaining an element from bpf_mem_cache_alloc(). The allocator can return a fresh, zeroed unit, or recycle one from its RCU-pending lists before the registered destructor has run. A BPF program can retain a map-value pointer after deleting its element and initialize and arm a timer through that pointer. If the deleted unit is recycled, check_and_init_map_value() clears the only pointer to the timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it, and the callback can run with its key and value pointing into freed memory. Do not reinitialize special fields on insertion. Fresh allocator units are already zeroed. For recycled units, the special fields are ownership state that must remain visible to the eventual destructor. copy_map_value() already skips those fields, matching the non-preallocated hash-map path and the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map value in prealloc_lru_pop"). [ kkd: Split out the fix and rewrote the commit log ] | 19 Oct |
| CVE-2026-97944 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preamble from "subl $hash, %r10d" to the shorter "subl $hash, %eax" moved the hash immediate from offset 7 to offset 5 of the preamble. fineibt_preamble_hash was updated to match, but the open-coded offset in cfi_get_func_hash() was missed and it still reads the hash at offset 7. cfi_get_func_hash() is used by the BPF JIT to give a struct_ops trampoline the CFI hash of the stub function it stands in for. With FineIBT the trampoline now gets the upper half of the real hash followed by the first two bytes of the next instruction, so the first indirect call from the kernel into a struct_ops program, tcp_init_congestion_control() calling ->init() of a BPF congestion control for example, fails the FineIBT check and the kernel dies with a CFI failure. Move the FineIBT preamble template and its offset defines above cfi_get_func_hash() and use fineibt_preamble_hash there, so every reader of the preamble shares one definition of its layout. The CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only configuration in which cfi_mode can take that value. cfi_get_func_arity() does not need the same treatment: the __bhi_args call whose displacement it reads still ends at the function address. | 19 Oct |
| CVE-2026-93266 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: arm64: RSI: fix field-spanning write warning in attestation token init The challenge is passed in registers a1 through a8. However, copying to ®s.a1 makes FORTIFY treat the destination as the single a1 field, resulting in a field-spanning write warning. [1] Overlay the SMCCC register structure with an RSI-specific argument layout and copy the challenge into an explicit 64-byte array. This keeps the existing a1-a8 argument encoding while giving the copy a correctly sized destination object. [1] memcpy: detected field-spanning write (size 64) of single field "®s.a1" at ./arch/arm64/include/asm/rsi_cmds.h:119 (size 8) WARNING: ./arch/arm64/include/asm/rsi_cmds.h:119 at rsi_attestation_token_init+0xdc/0xf8 [arm_cca_guest], CPU#0: cat/3314 | 19 Oct |
| CVE-2026-93183 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/lima: call drm_mm_init() with a valid allocation range lima_vm_create() is currently run before va_start and va_end are set up, meaning they are both 0. lima_vm_create() runs drm_mm_init() with them as arguments for the allocator, and if DRM_DEBUG_MM is enabled the DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on exynos4412-odroid-u2: [ 1.736297] ------------[ cut here ]------------ [ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931! [ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 1.750697] Modules linked in: [ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT [ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree) [ 1.769446] Workqueue: events_unbound deferred_probe_work_func [ 1.775261] PC is at drm_mm_init+0x9c/0xa4 [ 1.779339] LR is at lima_vm_create+0x144/0x17c [ ... ] Fix the issue by moving the lima_vm_create() call after va_start and va_end are set up. | 19 Oct |
| CVE-2026-93091 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Quiesce notifications before teardown scmi_notification_exit() clears and releases the notification instance, but transport callbacks can still deliver incoming notifications until the TX/RX channels are freed. During remove, an RX interrupt in that window can enter scmi_notify() while notification state is being torn down and then dereference freed memory. The same ordering exists on the probe error path after notification initialization. The notification late-init worker has a separate lifetime issue: protocol event registration queues ni->init_work on the system workqueue, so destroying ni->notify_wq does not drain that work. If the devres group is released while init_work is still pending or running, the late-init worker can dereference the freed notification instance. Quiesce the notification core before TX/RX channels are torn down, then clean up the channels before releasing the notification core resources. Use disable_work_sync() so future late-init queueing is rejected and any already queued or running late-init work has completed before channel teardown starts. | 19 Oct |
| CVE-2026-93082 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind P2A receiver mailbox setup failure mailbox_chan_setup() can request an additional P2A receiver channel after successfully acquiring the primary P2A channel. If that later request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts. | 19 Oct |
| CVE-2026-93080 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix transport device teardown lookup SCMI transport devices are deliberately excluded from normal SCMI bus matching so protocol drivers cannot bind to the internal transport children. However, scmi_device_destroy() uses the same protocol/name lookup to find devices that must be unregistered during channel teardown. Split the match helper so driver matching still skips transport devices, while explicit child lookup can find them for teardown. Use a shared transport-device name prefix macro for both matching and name generation. Since transport-device names are derived from direction and protocol ID, reject duplicate protocol channel setup before creating or finding a transport device. This prevents malformed firmware with duplicate protocol child nodes from reusing an existing transport device and then destroying it when the duplicate IDR insertion fails. | 19 Oct |
| CVE-2026-90430 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ error (e.g. one inherited across a kexec) firing in this window would make tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to __arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers. Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at the end of the allocation instead, with an smp_store_release() that pairs with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ or NULL. The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks the VINTF0 array. | 19 Oct |
| CVE-2026-90306 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9481/2: breakpoint: CFI breakpoints only on demand This removes the stub hw_breakpoint_cfi_handler() from ARM, making it not steal breakpoint type 0x03 (ARM_ENTRY_CFI_BREAKPOINT) unless CFI is actively used in the kernel. When not instrumenting with CFI, or when a breakpoint is issued in userspace, we fall through to return 1 from hw_breakpoint_pending() "unhandled fault" so userspace can make use of this breakpoint. Tested with LKDTM and this command line: echo CFI_FORWARD_PROTO > /sys/kernel/debug/provoke-crash/DIRECT still works as expected. | 19 Oct |
| CVE-2026-90305 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers created with timer_create(). | 19 Oct |
| CVE-2026-90304 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9484/1: enable interrupts when unhandled user faults are triggered PREEMPT_RT requires interrupts to be enabled when sending signals. When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults, that is `inf->fn()` return a non-zero value, and the interrupts are not enabled within the hook function, force_sig_fault() will be called with interrupts disabled. This can be triggered by user programs executing the bkpt instruction, with kernel config CONFIG_PERF_EVENTS=n. Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled user faults are triggered to fix the issue. | 19 Oct |
| CVE-2026-90303 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Keep everything unchanged for kernel faults, because the kernel is already in the "oops" state, acquiring a lock may risk a deadlock. | 19 Oct |
| CVE-2026-90295 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix out-of-bounds write when probed more than once imx6_soc_volt is allocated fresh on every probe, sized to the number of ARM OPPs: imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt), GFP_KERNEL); but it is filled through soc_opp_count, which has static storage and is never reset. A second bind after an unbind keeps indexing from where the first one stopped, and writes past the end of the new array. Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN: BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34 Write of size 4 at addr c5e90480 by task binder/73 imx6q_cpufreq_probe from platform_probe+0x88/0xe4 platform_probe from really_probe+0x108/0x384 bind_store from kernfs_fop_write_iter+0x1b4/0x28c The write lands one u32 past the end of the allocation. soc_opp_count is only read a few lines below the loop that fills it, so it never needed static storage. Make it a local. | 19 Oct |
| CVE-2026-90276 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk. | 19 Oct |
| CVE-2026-90272 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to userspace, but it's never set by the BRBE driver. Zero initialize it as it should be according to the docs: * For the architectures whose raw branch records are * already stored in age order, the hw_idx should be 0. It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE now in case anyone is setting it and reading the value, but zero initializing the whole struct also protects against the same issue with new fields that are added in the future. | 19 Oct |
| CVE-2026-90271 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt If a user unbinds an MSC after mpam_disable() has been run in response to an error interrupt then a dereference of a NULL pointer occurs as mpam_disable() sets the drvdata to NULL. Add an early return to the driver remove callback to avoid this. | 19 Oct |
| CVE-2026-90270 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Disable driver unbind to avoid UAF When a user unbinds an MSC and that MSC is the only MSC left for a component then the corresponding mpam_component will be freed. If the user then goes on to read the schemata file in the resctrl filesystem then the mpam_component will be accessed from resctrl_arch_get_config() leading to a use after free. As the MPAM driver is not a module the unbind sysfs interface is the only way to trigger the remove. Instead of dealing with the complexity of allowing some unused MSC to unbind just remove the unbind sysfs interface. | 19 Oct |
| CVE-2026-90171 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release pending child sockets outside the handler lock smbdirect_socket_destroy() releases the listener's pending/ready child sockets while still holding the listener's handler lock, the &id_priv->handler_mutex taken via rdma_lock_handler(), not sc->listen.lock, and before the listener's own rdma_destroy_id(). That ordering has one real consequence and one cosmetic one. The real one: smbdirect_socket_release() drops the child's last reference, which destroys the child's cm_id. Doing that before the listener's rdma_destroy_id() lets _cma_cancel_listens(), running from the listener's _destroy_id(), walk an already freed child id_priv, which KASAN catches as a slab-use-after-free during listener shutdown: [ 4758.909130] BUG: KASAN: slab-use-after-free in __mutex_lock+0x1469/0x1560 [ 4758.911450] Read of size 1 at addr ffff88821c381db4 by task ksmbd.control/1652 [ 4758.913262] Call Trace: [ 4758.913267] <TASK> [ 4758.913299] __mutex_lock+0x1469/0x1560 [ 4758.913408] _cma_cancel_listens+0x312/0x3b0 [ 4758.913413] _destroy_id+0x363/0xee0 [ 4758.913417] smbdirect_socket_destroy_sync+0x17d5/0x2440 [ 4758.913443] smbdirect_socket_release+0x124/0x230 [ 4758.913451] ksmbd_rdma_stop_listening+0x9f/0x190 [ 4758.913457] ksmbd_conn_transport_destroy+0x65/0x3c0 [ 4758.913463] kill_server_store+0x1fb/0x2b0 [ 4758.913501] kernfs_fop_write_iter+0x349/0x4d0 [ 4758.913507] vfs_write+0x5e7/0xc70 [ 4758.913528] ksys_write+0x12a/0x210 [ 4758.913541] do_syscall_64+0x135/0x460 [ 4758.913555] entry_SYSCALL_64_after_hwframe+0x77/0x7f The cosmetic one: releasing a child recurses into smbdirect_socket_destroy(), which takes the child's own rdma_lock_handler() lock nested under the listener's. The listener's and the child's cm_id are always different instances, so this cannot deadlock for real; the CM core itself nests a new connection id's handler_mutex under the listening id's in cma_ib_req_handler(). But lockdep only sees one lock class, reports possible recursive locking, and then disables itself, hiding real locking bugs for the rest of the run: [ 2424.579653] WARNING: possible recursive locking detected [ 2424.581180] 7.1.0-next-20260623+ #89 Not tainted [ 2424.582548] -------------------------------------------- [ 2424.584500] ksmbd.control/8854 is trying to acquire lock: [ 2424.586817] ffff888102303c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.590590] [ 2424.590590] but task is already holding lock: [ 2424.591601] ffff888102046c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.594178] [ 2424.594178] other info that might help us debug this: [ 2424.596634] Possible unsafe locking scenario: [ 2424.596634] [ 2424.598841] CPU0 [ 2424.599765] ---- [ 2424.600695] lock(&id_priv->handler_mutex); [ 2424.601836] lock(&id_priv->handler_mutex); [ 2424.602590] [ 2424.602590] *** DEADLOCK *** [ 2424.602590] [ 2424.604512] May be due to missing lock nesting notation Splice the pending/ready children onto a local list under the listener's listen.lock, while the handler lock is held so a concurrent CM CONNECT_REQUEST cannot add more, but defer the actual smbdirect_socket_release() calls until after the listener's cm_id has been destroyed and its handler lock dropped. The children are independent sockets whose teardown needs neither the listener's handler lock nor its cm_id. Found with ksmbdzzer [2], a KSMBD fuzzer that drives libFuzzer with a kcov-dataflow [1] coverage vector: it folds each instrumented comparison/argument's runtime operand value together with its PC (the default arm mixes them as pc⊕val) so that a new operand value at a known site counts as new coverage. [1] https://lwn.net/Articles/1077606/ [2] https://github.com/yskzalloc/kcov-dataflow | 19 Oct |
| CVE-2026-89978 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: return early from a zero-length flush SYNC_BO does not constrain its size, so a request for zero bytes reaches drm_clflush_virt_range(), which ends with an unconditional clflushopt(end - 1). For an empty range that is the byte before the mapping, and abo->mem.kva comes from vmap(), so the access lands in the guard page below the vmalloc area and faults: BUG: unable to handle page fault for address: ffffd16fbbc70fff #PF: supervisor read access in kernel mode Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 1000 Comm: sync_bo_probe RIP: 0010:drm_clflush_virt_range+0x3c/0x70 Call Trace: amdxdna_drm_sync_bo_ioctl+0x124/0x430 [amdxdna] drm_ioctl+0x301/0x4c0 __x64_sys_ioctl+0x115/0x2f0 do_syscall_64+0xa6/0x3d0 Any process that can open the render node can do this. Reproduced 3 of 3 times on a Strix Point NPU (1022:17f0), by calling SYNC_BO with size 0 on an AMDXDNA_BO_SHARE object. The import arm takes the same request but flushes the whole scatterlist, so it survives it. Nothing needs flushing for an empty range, so answer before choosing a path. | 19 Oct |
| CVE-2026-89798 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before storing the caller's callback in rn->rn_done. The xarray makes @rn reachable to rpcrdma_remove_one(), which walks rd_xa and invokes rn->rn_done(rn) for every registered notification. A device removal that races a fresh registration can therefore observe @rn with rn_done still NULL, because the notification objects are zero allocated by their owners, and call through a NULL function pointer. Store rn->rn_done before xa_alloc() publishes @rn. The xarray's store-side and load-side ordering then guarantees that any CPU which finds @rn in rd_xa also observes the armed callback. rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel for a completed registration, so the early store must not survive a failed registration. Clear rn_done again when xa_alloc() fails. Were it left set, the failed-accept cleanup path would call rpcrdma_rn_unregister() on an @rn that was never inserted, erasing an unrelated rd_xa slot and underflowing rd_kref. | 19 Oct |
| CVE-2026-80842 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: fix use-after-free of a master VLAN's multicast context br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before stopping a VLAN's multicast context. That is the teardown handshake: lockless readers gate on the flag through br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so once it is cleared under the lock no reader can arm the context again. For a master VLAN the handshake never runs. __vlan_del() clears BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so br_multicast_toggle_one_vlan(masterv, false) returns early on !br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is never taken. br_vlan_put_master() then drains the context in br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a reader still inside rcu_read_lock() sees the context as enabled and re-arms it. The port and port-VLAN branch of the function has no br_vlan_is_brentry() test and flips the flag under br->multicast_lock, so it is not affected. The reader is the bridge transmit path. For a master VLAN br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with pmctx = NULL, so IGMP sent to the bridge device re-arms the context's timers after br_multicast_ctx_deinit() has already stopped them. BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0 Write of size 8 at addr ffff88810ac39918 by task brmc/601 __mod_timer+0x51a/0xc50 br_multicast_host_join+0x25b/0x390 __br_multicast_add_group+0x468/0x530 br_ip4_multicast_add_group+0x1a0/0x260 br_multicast_rcv+0x2cda/0x61e0 br_dev_xmit+0x6c4/0x1540 Allocated by task 610: br_vlan_add+0x111/0xb40 br_vlan_info+0x370/0x3e0 Freed by task 0: kfree+0x1a7/0x4f0 rcu_core+0x7dc/0x10a0 Only test br_vlan_is_brentry() when enabling, like the br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before br_multicast_ctx_deinit() drains the context. | 19 Oct |
| CVE-2026-80840 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: seg6: clear IPv4 control block on IPIP decapsulation End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress. | 19 Oct |
| CVE-2026-80818 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown arm_smmu_impl_remove() is registered as a devres action in arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an unbind, the queue is freed first and arm_smmu_impl_remove() then runs tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on the freed memory. Observed during testing with a QEMU hack that makes the VCMDQ fail to enable, so the impl reset fails and probe aborts into the devres unwind: platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110 Unable to handle kernel paging request at virtual address ffff8000891e0098 ... Internal error: Oops: 0000000096000047 [#1] SMP ... Call trace: arm_smmu_cmdq_issue_cmdlist+0x320/0x6fc (P) tegra241_vcmdq_hw_deinit+0x98/0x168 tegra241_vintf_hw_deinit+0x5c/0x1b0 tegra241_cmdqv_remove_vintf+0x34/0xec tegra241_cmdqv_remove+0x40/0x9c arm_smmu_impl_remove+0x20/0x30 devm_action_release+0x14/0x20 devres_release_all+0xa8/0x110 device_unbind_cleanup+0x18/0x84 really_probe+0x1f0/0x29c Drop the VINTF deinit from tegra241_cmdqv_remove_vintf() so the unwind no longer touches the freed queue. Quiesce the VINTFs earlier instead. Add a device_disable() impl op and run it from arm_smmu_disable_action() while the CMDQ is still up. That handles a live unbind. A failed reset is already handled because tegra241_vintf_hw_init() deinits the VINTF on its own error path. tegra241_cmdqv_remove_vintf() is also used by the iommufd viommu destroy path, so quiesce there too. | 19 Oct |
| CVE-2026-80772 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here. | 19 Oct |
| CVE-2025-68204 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: scmi: Fix genpd leak on provider registration failure If of_genpd_add_provider_onecell() fails during probe, the previously created generic power domains are not removed, leading to a memory leak and potential kernel crash later in genpd_debug_add(). Add proper error handling to unwind the initialized domains before returning from probe to ensure all resources are correctly released on failure. Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20 | 14 Oct |
| CVE-2025-68220 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. | 14 Oct |
| CVE-2026-74639 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 14 Oct |
| CVE-2026-74658 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: futex: Prevent robust futex exit race some more A robust futex unlock stores 0 over the whole futex value - wiping FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot notification: the protocol relies on its recipient to either acquire the futex (and eventually unlock while aware of the remaining contention) or re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed before it can do either, the kernel must jump in and wake the next task down the line. This is a known complication of the futex protocol with a previous partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit race"). Unfortunately, that fix is insufficient. If a third task re-acquired the futex through the uncontended fast path in the meantime, the notification is lost: robust exit processing sees that it is owned by another task and does nothing, while the new owner sees no FUTEX_WAITERS when it unlocks and wakes nobody. The remaining waiters sleep forever behind a free futex: A owns the futex, B and C sleep in FUTEX_WAIT uval == A | FUTEX_WAITERS A robust unlock: store 0, FUTEX_WAKE(1) wakes B uval == 0 D fast path acquire: cmpxchg(0 -> D) uval == D, no FUTEX_WAITERS B killed before acting on the wakeup B exit walk, pending op: owner D != B -> no action D unlock: no FUTEX_WAITERS -> no wake C sleeps forever This is clearly a shortcoming in the implementation, which fails to keep the FUTEX_WAITERS bit consistent. Work around this by augmenting the robust list exit processing to also perform the extra wakeup if the futex word is owned by another thread but FUTEX_WAITERS is not set. This does not fix the problem of a non-contended take over/release and free sequence, which has been discussed for years and has been addressed by commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and subsequent changes, but failed to take the problem described above into account. A more complete solution which is based on the in kernel unlock of contended robust futexes has been discussed in the context of this change and should show up in mainline sooner than later. [ tglx: Amend change log slightly and fixup coding style ] | 14 Oct |
197 of 197 · Previous
Download these 197 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.