Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-52663 | 7.3 high | 0.00% | no CPE yet | A vulnerability was identified in certain UniFi Talk devices where internal debugging functionality remained unintentionally enabled. This issue could allow an attacker with access to the UniFi Talk management network to invoke internal debug operations through the device API. Affected Products: UniFi Talk Touch (Version 1.21.16 and earlier) UniFi Talk Touch Max (Version 2.21.22 and earlier) UniFi Talk G3 Phones (Version 3.21.26 and earlier) Mitigation: Update the UniFi Talk Touch to Version 1.21.17 or later. Update the UniFi Talk Touch Max to Version 2.21.23 or later. Update the UniFi Talk G3 Phones to Version 3.21.27 or later. | 18 Oct |
| CVE-2023-54098 | 7.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gvt: fix gvt debugfs destroy When gvt debug fs is destroyed, need to have a sane check if drm minor's debugfs root is still available or not, otherwise in case like device remove through unbinding, drm minor's debugfs directory has already been removed, then intel_gvt_debugfs_clean() would act upon dangling pointer like below oops. i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2 i915 0000:00:02.0: MDEV: Registered Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ #15 Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020 RIP: 0010:down_write+0x1f/0x90 Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01 RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000 RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8 RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0 FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0 Call Trace: <TASK> simple_recursive_removal+0x9f/0x2a0 ? start_creating.part.0+0x120/0x120 ? _raw_spin_lock+0x13/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_clean+0x15/0x30 [kvmgt] intel_gvt_clean_device+0x49/0xe0 [kvmgt] intel_gvt_driver_remove+0x2f/0xb0 i915_driver_remove+0xa4/0xf0 i915_pci_remove+0x1a/0x30 pci_device_remove+0x33/0xa0 device_release_driver_internal+0x1b2/0x230 unbind_store+0xe0/0x110 kernfs_fop_write_iter+0x11b/0x1f0 vfs_write+0x203/0x3d0 ksys_write+0x63/0xe0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6947cb5190 Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190 RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001 RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001 R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0 </TASK> Modules linked in: kvmgt CR2: 00000000000000a0 ---[ end trace 0000000000000000 ]--- | 15 Oct |
| CVE-2026-120114 | 7.2 high | 0.00% | qriouslad, debug log manager – conveniently monitor and inspect errors | The Debug Log Manager – Conveniently Monitor and Inspect Errors plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'message (and pageUrl)' parameter in all versions up to, and including, 2.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the site administrator has debug logging enabled with JS error logging active, and that the attacker can obtain the publicly emitted dlmVars.jsErrorLogging nonce — which is broadcast on every frontend page — to pass the nonce check on the unauthenticated endpoint. | 12 h ago |
| CVE-2026-33906 | 7.2 high | 0.00% | ellanetworks, ella_core | Ella Core is a 5G core designed for private networks. Prior to version 1.7.0, the NetworkManager role was granted backup and restore permission. The restore endpoint accepted any valid SQLite file without verifying its contents. A NetworkManager could replace the production database with a tampered copy to escalate to Admin, gaining access to user management, audit logs, debug endpoints, and operator identity configuration that the role was explicitly denied. In version 1.7.0, backup and restore permissions have been removed from the NetworkManager role. | Mon 26 Oct |
| CVE-2026-104000 | 7.2 high | 0.00% | no CPE yet | The Simply Schedule Appointments plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'status' parameter in all versions up to, and including, 1.6.12.35 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The malicious payload is stored unconditionally because debug logging is enabled by default, and the debug-log viewer is accessible to anyone holding the site-wide Support PIN (an HMAC-MD5 of AUTH_SALT displayed in wp-admin), meaning the injected script will execute against the administrator's session during ordinary support or troubleshooting workflows. | 16 Oct |
| CVE-2026-97640 | 7.2 high | 0.00% | no CPE yet | The WPConsent – Cookie Banner & Cookie Consent for Privacy Compliance (GDPR / CCPA / EU Compliance Cookie Notice) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Simple HTML DOM Parser Noise-Key Restoration (mXSS) in all versions up to, and including, 1.1.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the Script Blocking feature to be enabled, and the exploit chain depends on an attacker submitting two coordinated comments — one embedding event-handler syntax inside an allowed <code> element and one placing the deterministic ___noise___ restoration key inside an allowed <abbr title=""> attribute — with the key offset confirmable via an unauthenticated wpconsent_debug=1 request. | 16 Oct |
| CVE-2026-77114 | 7.2 high | 0.00% | no CPE yet | The Document Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'dg_thumber_webhook' Action Request Body in all versions up to, and including, 5.1.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that logging be enabled in the plugin's Advanced settings, which is only the default state when WP_DEBUG is true; otherwise an administrator must manually enable it. | 15 Oct |
| CVE-2026-75480 | 7.1 high | 0.00% | no CPE yet | OpenViking debug vector scroll and count endpoints apply only account-level scoping without user-level access controls, allowing authenticated users to read all co-tenant records. Attackers can query these endpoints to retrieve private memories, resources, skills, and secret material belonging to other users in the same account without administrative privileges. | 23 Oct |
| CVE-2025-39883 | 7.1 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug. | 19 Oct |
| CVE-2025-39901 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access. | 19 Oct |
| CVE-2026-53187 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch. | 19 Oct |
| CVE-2026-43280 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29) | 19 Oct |
| CVE-2025-71133 | 7.1 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: avoid invalid read in irdma_net_event irdma_net_event() should not dereference anything from "neigh" (alias "ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE. Other events come with different structures pointed to by "ptr" and they may be smaller than struct neighbour. Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case. The bug is mostly harmless, but it triggers KASAN on debug kernels: BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma] Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554 CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1 Hardware name: [...] Workqueue: events rt6_probe_deferred Call Trace: <IRQ> dump_stack_lvl+0x60/0xb0 print_address_description.constprop.0+0x2c/0x3f0 print_report+0xb4/0x270 kasan_report+0x92/0xc0 irdma_net_event+0x32e/0x3b0 [irdma] notifier_call_chain+0x9e/0x180 atomic_notifier_call_chain+0x5c/0x110 rt6_do_redirect+0xb91/0x1080 tcp_v6_err+0xe9b/0x13e0 icmpv6_notify+0x2b2/0x630 ndisc_redirect_rcv+0x328/0x530 icmpv6_rcv+0xc16/0x1360 ip6_protocol_deliver_rcu+0xb84/0x12e0 ip6_input_finish+0x117/0x240 ip6_input+0xc4/0x370 ipv6_rcv+0x420/0x7d0 __netif_receive_skb_one_core+0x118/0x1b0 process_backlog+0xd1/0x5d0 __napi_poll.constprop.0+0xa3/0x440 net_rx_action+0x78a/0xba0 handle_softirqs+0x2d4/0x9c0 do_softirq+0xad/0xe0 </IRQ> | 19 Oct |
| CVE-2026-110855 | 7.1 high | 0.00% | no CPE yet | GitPython before 3.2.0 contains an information disclosure vulnerability that allows malicious repositories to expand environment variables via separate_git_dir in Repo._clone(), which omits expand_vars=False when calling Git.polish_url(). Attackers can craft a .gitmodules submodule name containing variable syntax so that clone plus submodule_update exposes secrets in .git/modules directory names and DEBUG logs. | 16 Oct |
| CVE-2022-50665 | 7.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 | 15 Oct |
| CVE-2026-79828 | 7.1 high | 0.00% | no CPE yet | A heap buffer overflow in HPE NonStop Debug Utilities could corrupt resume-execution address and may potentially redirect execution flow. | 15 Oct |
| CVE-2026-44934 | 7.0 high | 0.00% | no CPE yet | A information disclosure when DEBUG loglevel is set in SUSE Rancher AI Agent 1.0 before 1.0.2 could leak API keys or LLM response text with potential sensitive data into logfiles, allowing local attackers to misuse respective gained data or credentials. | 25 Oct |
| CVE-2026-64315 | 7.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | 24 Oct |
| CVE-2026-90403 | 7.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path. | 19 Oct |
| CVE-2026-13732 | 7.0 high | 0.00% | no CPE yet | A flaw was found in GDB's STABS debug format parser. The read_member_functions() function in gdb/stabsread.c contains a linked list removal bug in the code that separates destructor and non-destructor member functions of C++ classes. The bug causes the destructor entries to remain in the main function list while the list length counter is decremented, resulting in an out-of-bounds write when the function list is copied to its final allocated array. An attacker can craft an ELF binary with malicious .stab and .stabstr sections that triggers this out-of-bounds write when a user opens the file in GDB and performs any symbol-inspection operation such as setting a breakpoint. The inferior process does not need to be executed. Under controlled conditions, this was demonstrated to achieve execution of arbitrary commands within the GDB process. | 14 Oct |
| CVE-2026-41931 | 6.9 medium | 0.00% | no CPE yet | Vvveb before version 1.0.8.2 contains an information disclosure vulnerability that allows unauthenticated attackers to obtain sensitive server information by triggering unhandled exceptions in the password-reset module. Attackers can access the admin password-reset endpoint to trigger a fatal error caused by a missing namespace import, which exposes the absolute server file path, internal class namespaces, line numbers, and source code excerpts through the debug exception handler rendered to unauthenticated requests. | Mon 26 Oct |
| CVE-2026-47709 | 6.9 medium | 0.00% | struktur, libheif | libheif is a HEIF and AVIF file format decoder and encoder. Versions prior to 1.22.0 crashes in the public C API `heif_image_handle_get_image_tiling()` when a malformed uncompressed HEIF image item has an associated `uncC` property but no associated `ispe` property. In debug builds this trips the `ispe && uncC` assertion in `ImageItem_uncompressed::get_heif_image_tiling()`. In a release/NDEBUG ASan build, the same file causes a null pointer read at address `0xa8`. Version 1.22.0 fixes the issue. | 24 Oct |
| CVE-2026-104618 | 6.9 medium | 0.00% | no CPE yet | On request the `sdbootutil` script creates a world-readable debug log in /var/log/sdbootutil.log. The log file is created world-readable, however, which means that arbitrary low-privileged users in the system will be able to extract secrets from it. | 16 Oct |
| CVE-2026-114073 | 6.8 medium | 0.00% | no CPE yet | Trigger.dev CLI before 4.5.9 contains an information disclosure vulnerability that exposes resolved environment secret values in debug deployment logs by serializing unredacted envVars. Attackers with access to terminal transcripts, CI debug logs, or support bundles can read the Starting buildWorker record to recover database connection strings and service credentials. | Tue 27 Oct |
| CVE-2025-11538 | 6.8 medium | 0.00% | no CPE yet | A vulnerability exists in Keycloak's server distribution where enabling debug mode (--debug <port>) insecurely defaults to binding the Java Debug Wire Protocol (JDWP) port to all network interfaces (0.0.0.0). This exposes the debug port to the local network, allowing an attacker on the same network segment to attach a remote debugger and achieve remote code execution within the Keycloak Java virtual machine. | 18 Oct |
| CVE-2021-0146 | 6.8 medium | 0.00% | intel, pentium_j6426_firmware, pentium_j4205_firmware, pentium_j3710_firmware | Hardware allows activation of test or debug logic at runtime for some Intel(R) processors which may allow an unauthenticated user to potentially enable escalation of privilege via physical access. | 8 Oct |
| CVE-2026-73593 | 6.7 medium | 0.00% | dell, policy_manager_for_secure_connect_gateway | Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Active Debug Code vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Protection mechanism bypass, and Unauthorized access. | 15 Oct |
| CVE-2026-41081 | 6.5 medium | 0.00% | apache, storm | Improper Handling of TLS Client Authentication Failure Leading to Anonymous Principal Assignment in Apache Storm Versions Affected: up to 2.8.7 Description: When TLS transport is enabled in Apache Storm without requiring client certificate authentication (the default configuration), the TlsTransportPlugin assigns a fallback principal (CN=ANONYMOUS) if no client certificate is presented or if certificate verification fails. The underlying SSLPeerUnverifiedException is caught and suppressed rather than rejecting the connection. This fail-open behavior means an unauthenticated client can establish a TLS connection and receive a valid principal identity. If the configured authorizer (e.g., SimpleACLAuthorizer) does not explicitly deny access to CN=ANONYMOUS, this may result in unauthorized access to Storm services. The condition is logged at debug level only, reducing visibility in production. Impact: Unauthenticated clients may be assigned a principal identity, potentially bypassing authorization in permissive or misconfigured environments. Mitigation: Users should upgrade to 2.8.7 in which TLS authentication failures are handled in a fail-closed manner. Users who cannot upgrade immediately should: - Enable mandatory client certificate authentication (nimbus.thrift.tls.client.auth.required: true) - Ensure authorization rules explicitly deny access to CN=ANONYMOUS - Review all ACL configurations for implicit default-allow behavior | Mon 26 Oct |
| CVE-2026-8405 | 6.5 medium | 0.00% | ibm, guardium_data_protection | IBM Guardium Data Protection 12.2.1, and 12.2.2 's add-on feature of Guardium Data Protection named "Long Term Retention" (LTR) can expose sensitive credentials in debug mode. | Mon 26 Oct |
| CVE-2025-8305 | 6.5 medium | 0.00% | no CPE yet | An authenticated local user can obtain information that allows claiming security policy rules of another user due to sensitive information being printed in plaintext in Identity Agent for Terminal Services debug files. | 19 Oct |
| CVE-2026-19740 | 6.5 medium | 0.00% | no CPE yet | The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool. A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND. In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently. The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission. | 16 Oct |
| CVE-2026-19739 | 6.5 medium | 0.00% | no CPE yet | The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it. A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND. With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. | 16 Oct |
| CVE-2026-19738 | 6.5 medium | 0.00% | no CPE yet | The Bluetooth Link Layer Control Procedure (LLCP) implementation for Connected Isochronous Stream (CIS) creation retains an RX node (ctx->node_ref.rx, marked NODE_RX_TYPE_RETAIN) so it can later be reused as the host notification — on the peripheral while awaiting the Host's reply to an LL_CIS_REQ, and on the central for the whole duration of a locally initiated CIS Create. In subsys/bluetooth/controller/ll_sw/ull_llcp_cc.c, the "invalid PDU received" paths of llcp_rp_cc_rx() and llcp_lp_cc_rx() terminated the connection and completed the procedure without releasing that retained node, breaking the invariant checked in llcp_lr_check_done() and llcp_rr_check_done() and orphaning the node's memory. A peer device within radio range can reach this with a single extra LL Control PDU on an unauthenticated, unencrypted ACL link. Against a peripheral, the attacker sends a valid LL_CIS_REQ and then, before the Host replies, any unrelated LL Control PDU (for example LL_VERSION_IND), which ull_cp_rx() routes into the active remote procedure. Against a central performing a CIS Create, a malicious peripheral answers with LL_UNKNOWN_RSP for CIS_REQ, which is dispatched into the active local procedure. No pairing, encryption or user interaction is required; the code is compiled in when CONFIG_BT_CTLR_PERIPHERAL_ISO or CONFIG_BT_CTLR_CENTRAL_ISO is enabled. In default builds (CONFIG_BT_CTLR_ASSERT_DEBUG is default y) the retained-node assertion fires immediately, producing a controller fatal error and, typically, a system reset from one injected PDU. With the development assertions disabled, each attempt permanently loses one node from the controller's small LL notification pool (LL_PDU_RX_CNT, 2 * CONFIG_BT_CTLR_LLCP_CONN) together with its memq_link_t; repeating the connect-attack-reconnect cycle exhausts the pool, after which notification allocation always fails, RX flow control stalls, and the non-disableable LL_ASSERT_ERR() in llcp_lp_cc_flush() faults. The impact is limited to availability — the leaked node is orphaned, never reused or double-freed — and recovery requires a reboot. | 16 Oct |
| CVE-2026-111443 | 6.5 medium | 0.00% | no CPE yet | Wheels 4.0.6 through 4.1.2 lets an unauthenticated client switch a request into a separate test application context, including in production, by supplying an X-Wheels-Test-Context header or WHEELS_TEST_CONTEXT cookie with any value, or including a test-runner path anywhere in the URL, even the query string. The alternate application uses the same configuration, environment, datasource and debug settings: this is not an authentication bypass or data/debug escalation. It can bypass maintenance mode enabled only at runtime, provide a second set of in-memory rate-limit counters, and trigger additional application-startup side effects and memory use. This is fixed in 4.2.0. | 16 Oct |
| CVE-2026-10660 | 6.4 medium | 0.00% | no CPE yet | The Bluetooth BAP Broadcast Assistant GATT client in subsys/bluetooth/audio/bap_broadcast_assistant.c reassembled remote Broadcast Receive State data into a single file-static net_buf_simple (att_buf, BT_ATT_MAX_ATTRIBUTE_LEN = 512 bytes) shared by all connection instances, while the BUSY flag, long-read handle, and reset/offset state were per-connection. When the device acts as a Broadcast Assistant connected to multiple Scan Delegator peripherals, notification and long-read callbacks from different connections interleave on the shared buffer: the append in notify_handler (net_buf_simple_add_mem at the not-busy branch) performs no tailroom check, so receive-state notifications from two or more delegators accumulate on the same 512-byte buffer and, with a sufficiently large configured ATT MTU (BT_L2CAP_TX_MTU up to 2000) and two-to-three concurrent connections, write past the buffer into adjacent .bss (net_buf_simple_add only asserts in debug builds). Even below the overflow threshold, one connection's net_buf_simple_reset zeroes the shared length while another connection's reassembly and GATT read offset are in flight, mixing one peer's data into another's parse. A malicious or compromised Scan Delegator (or two colluding peers) over BLE can trigger this, causing out-of-bounds writes (memory corruption / denial of service) and cross-connection data corruption. The fix moves the buffer into the per-connection instance struct so each connection reassembles into its own buffer. Affects Zephyr releases shipping the Broadcast Assistant with the shared buffer, including v4.4.0 and earlier. | 25 Oct |
| CVE-2025-9500 | 6.4 medium | 0.00% | no CPE yet | The TablePress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘shortcode_debug’ parameter in all versions up to, and including, 3.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 18 Oct |
| CVE-2026-5039 | 6.1 medium | 0.00% | tp-link, tl-wr841n_firmware | TP-Link TL-WR841N v13 uses DES-CBC encryption in the TDDPv2 debug protocol with a cryptographic key derived from default web management credentials, making the key predictable if device is left in default configuration. A network-adjacent attacker can exploit this weakness to gain unauthorized access to the protocol, read debug data, modify certain device configuration values, and trigger device reboot, resulting in loss of integrity and a denial-of-service condition. | 25 Oct |
| CVE-2026-32822 | 6.1 medium | 0.00% | no CPE yet | dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any unauthenticated attacker can place arbitrary HTML into flash notifications on public routes and rely on the frontend toast component to inject that content into the DOM with `innerHTML`. This creates a reflected DOM XSS that can be delivered with a crafted link to a public page such as `/docs`. Because the vulnerable JavaScript is loaded by the normal application layout, the issue is not limited to a special debug page or an isolated admin-only view. | 24 Oct |
| CVE-2026-61526 | 6.1 medium | 0.00% | no CPE yet | AdonisJS HTTP Server is a package for handling HTTP requests in the AdonisJS framework. In versions 8.0.0-next.0 through 8.2.0 and 9.0.0 through 9.0.2, the error.message is interpolated into the default HTML exception response without escaping, allowing a crafted missing-route URL to execute attacker-controlled JavaScript when a victim opens it and no custom status page or JSON response handles the error. When debug mode is disabled and no custom status page handles the error, the default HTML renderer interpolates error.message directly into an HTML response. This issue is fixed in versions 8.2.1 and 9.1.0. | 23 Oct |
| CVE-2026-120250 | 6.0 medium | 0.00% | marketcalls, openalgo | OpenAlgo 1.0.0.29 before 2.0.3.1 contains an improper certificate validation vulnerability in utils/email_utils.py and utils/email_debug.py that disables TLS hostname and certificate checks for STARTTLS and SMTPS. Network-positioned attackers can present a forged certificate to intercept SMTP credentials and all later mail, including password-reset links. | Sun 1 Nov |
| CVE-2026-79656 | 6.0 medium | 0.00% | no CPE yet | A user with read access to Grafana's server logs, or to a log store they are shipped to, can recover the OAuth and OIDC access, refresh and ID tokens of users who sign in through the Generic OAuth, Google or GitLab providers. Grafana writes these tokens to its logs unredacted when an access or ID token is not a valid JWT, when the ID token is missing (at debug level) or is not a string (exposure of sensitive information in log files). The exposure is bounded by the scopes granted to the configured OAuth client. | Wed 28 Oct |
| CVE-2026-62347 | 5.9 medium | 0.00% | element-hq, element-call | Element Call is a native Matrix video conferencing application. From 0.16.0 until 0.20.3, the standalone Element Call `SPA` logs the `password` URL query parameter. When a user submits an error report, called a rageshake, these logs are shared with the application operator. Users can therefore unintentionally disclose the shared `password` used to encrypt the call, potentially compromising call confidentiality. Avoiding submission of bug reports or debug logs prevents this disclosure path in affected versions. Upgrading does not remove secrets from previously collected `rageshakes`, which require separate cleanup by the log-server operator. This issue is fixed in version 0.20.3. | Fri 30 Oct |
| CVE-2026-15712 | 5.9 medium | 0.00% | no CPE yet | A heap buffer over-read vulnerability was discovered in libsoup's (versions: libsoup 3.0 to 3.7.0) HTTP/2 connection tracking framework. When the library processes an HTTP/2 GOAWAY frame, it improperly handles the "Additional Debug Data" payload by assuming the data stream is a safely NUL-terminated C-string. Because the parser lacks strict length-boundary verification before reading this data, a remote, unauthenticated attacker can intentionally send a malformed GOAWAY frame missing the appropriate null delimiter. This causes the library to read past the end of the allocated buffer, triggering an application crash that results in a denial of service (DoS), or potentially exposing fragments of memory contents. | 24 Oct |
| CVE-2026-52863 | 5.9 medium | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.25.0 up to and including 1.25.1, a fix that makes the 'respip' and 'dns64' modules work together, creates a shallow copy of the view name in effect that could lead to memory corruption if the owner of the original view name is jostled out when Unbound is under pressure. Unbound needs to be configured with one of 'respip'/'rpz' modules, together with a module that can attach subqueries (respip CNAME redirection, dns64, subnetcache) and a configured 'access-control-view' while Unbound is under pressure so that joslte logic kicks in and starts dropping slow queries. The subquery is getting a shallow copy of the view name and if the super query which owns the view name is jostled out, memory corruption can occur. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. Debug memory builds (e.g., ASAN) that catch the free terminate the server. | 24 Oct |
| CVE-2026-76787 | 5.9 medium | 0.00% | no CPE yet | The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. | 20 Oct |
| CVE-2026-111449 | 5.9 medium | 0.00% | no CPE yet | Wheels 3.0.0 through 4.1.1 can disclose detailed exceptions when allowIPBasedDebugAccess=true (disabled by default). An allowed administrator request changes error/debug-display settings in shared application scope. If it overlaps with an unauthorized client's request that raises an error, that client can receive full exception details, including tag context or a serialized exception, and any sensitive data they contain. This race does not bypass the production gate protecting developer tools. This is fixed in 4.1.2. | 16 Oct |
| CVE-2026-66068 | 5.6 medium | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
| CVE-2026-7022 | 5.5 medium | 0.00% | no CPE yet | A security vulnerability has been detected in SmythOS sre up to 0.0.15. Affected is the function AgentRuntime of the file packages/core/src/subsystems/AgentManager/AgentRuntime.class.ts of the component HTTP Header Handler. Such manipulation of the argument X-DEBUG-RUN/X-DEBUG-INJ leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-13750 | 5.5 medium | 0.00% | snowflake, snowflake_cli | Insertion of sensitive information into log files in Snowflake CLI versions prior to 3.19 allowed plaintext credentials to be written to persistent local debug logs. An attacker could exploit this by obtaining read access to the affected user's local log files, causing credentials such as passwords, tokens, or private key material to be exposed without additional application-level safeguards. Successful exploitation requires credentials to be present in the affected connection context and the resulting logs to be accessible from the local environment. The fix is available in Snowflake CLI version 3.19, and users must manually upgrade. | 25 Oct |
| CVE-2026-64316 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | 24 Oct |
Download these 400 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.