Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-90104 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | 21 Oct |
| CVE-2026-90042 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | 21 Oct |
| CVE-2026-89972 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. | 21 Oct |
| CVE-2026-89788 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix tree connection use-after-free in smb2_tree_connect() ksmbd_tree_conn_connect() publishes a new tree connection in sess->tree_conns with a single reference and returns its pointer to smb2_tree_connect(). The handler continues to initialize the object and build the response after publication. A concurrent session logoff can erase the connection and drop that reference, freeing the object while the handler still uses it. BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90 smb2_tree_connect (fs/smb/server/smb2pdu.c:2872) handle_ksmbd_work process_one_work worker_thread kthread After xa_store() succeeds, take a second reference before releasing tree_conns_lock. The original reference belongs to the xarray entry and the second belongs to the creating smb2_tree_connect() handler. Keep the references balanced in every path: - On normal exit or an error after publication, smb2_tree_connect() drops its creator reference. Error cleanup also calls ksmbd_tree_conn_disconnect(), which drops the xarray reference only if it removes the exact entry. - SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop its xarray reference. The request's existing lookup reference remains owned by the request and is released by the existing cleanup. - Session LOGOFF removes each entry and drops its xarray reference. If it wins the race, later cleanup sees that the entry is gone and does not drop that reference again. To enforce this ownership, claim the disconnected state and erase the exact entry atomically under tree_conns_lock. This guarantees one drop for the xarray reference and one drop by each in-flight user, regardless of which teardown path wins. If logoff removes the entry before initialization completes, fail the connect instead of marking the detached object TREE_CONNECTED. | 21 Oct |
| CVE-2026-89686 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix BUG_ON in nfsd4_alloc_layout_stateid on racing delegation revoke nfsd4_alloc_layout_stateid reads fp->fi_deleg_file without holding fi_lock when the parent stateid is a delegation. A concurrent delegation revoke via the laundromat can clear fi_deleg_file under fi_lock, causing nfsd_file_get() to return NULL and triggering the BUG_ON. This race is client-reachable: two NFS clients can trigger it by having one hold a delegation while another opens the same file to force a recall. When the first client doesn't respond to the recall, the laundromat revokes it. A concurrent LAYOUTGET from any client using the delegation stateid hits the race window. Fix this by taking fi_lock around the fi_deleg_file read in the SC_TYPE_DELEG path, matching the locking discipline of the find_any_file() arm, and replacing the BUG_ON with a graceful error return that cleans up the partially-initialized layout stateid. | 21 Oct |
| CVE-2026-89654 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in check_new_map() on session freed during unlock check_new_map() iterates mdsc->sessions[] and for each active session drops mdsc->mutex to perform per-session operations. The forced-close path (rank removed from map) correctly takes a reference on s via ceph_get_mds_session() before releasing mdsc->mutex, but three other paths do not: Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex) Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s) Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex) Without the extra reference, another thread can acquire mdsc->mutex during the unlock window, call __unregister_session() which drops the last reference on s, and free it. The original thread then accesses freed memory via s->s_mutex. Fix by adding ceph_get_mds_session(s) before each mutex_unlock and ceph_put_mds_session(s) after the corresponding mutex_lock, matching the pattern already used in the forced-close path. Race timeline (Path A): Thread A (check_new_map) Thread B (another map update holds mdsc->mutex or session teardown) -------------------------- -------------------------- s = mdsc->sessions[i] (refcount == 1, held only by sessions[] array) mutex_unlock(&mdsc->mutex) ---> acquires mdsc->mutex __unregister_session(mdsc, s) sessions[i] = NULL ceph_put_mds_session(s) refcount: 1 -> 0 kfree(s) <--- freed! mutex_lock(&s->s_mutex) UAF on freed s->s_mutex | 21 Oct |
| CVE-2026-89526 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path. | 21 Oct |
| CVE-2026-89492 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). | 21 Oct |
| CVE-2026-80980 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: stop killed, freed and out_of_sync sharing a byte The three connection state flags are single-bit bitfields, so they occupy one byte of struct smc_connection and every store to one is a read-modify-write of the other two: u8 killed : 1; u8 freed : 1; u8 out_of_sync : 1; They are not written under a common lock. smc_cdc_msg_validate() sets out_of_sync from the receive tasklet, while smc_conn_kill() sets killed from process context under lock_sock(), and the receive path does not defer to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only bh_lock_sock(). Give each flag its own byte so a store no longer touches its neighbours. All readers test them as booleans and are unchanged. struct smc_connection grows by two bytes. | 21 Oct |
| CVE-2026-80668 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. | 21 Oct |
| CVE-2026-80634 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ]. | 21 Oct |
| CVE-2026-74752 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids. | 21 Oct |
| CVE-2026-74723 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | 21 Oct |
| CVE-2026-74350 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | 21 Oct |
| CVE-2026-74269 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | 21 Oct |
| CVE-2026-72494 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <[email protected]> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose. | 21 Oct |
| CVE-2026-72398 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk->chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer. | 21 Oct |
| CVE-2026-72366 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_create_write_req() to handle async cache object creation netfs_create_write_req() will skip caching if the fscache cookie is disabled, but this is a problem because async cache object creation might not have got far enough yet that has been enabled - thereby causing the call to fscache_begin_write_operation() to be skipped. Fix this by removing the checks on the cookie and delegating this to fscache_begin_write_operation(). | 21 Oct |
| CVE-2026-72200 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: detect mapping-pairs LCN accumulator overflow The NTFS mapping-pairs parser accumulates relative LCN deltas in a signed integer. A corrupted attribute can drive that addition past the representable range. One corrupt runlist shape sets the accumulated LCN to S64_MAX and then adds a delta of 1 in the next mapping-pairs entry. Signed overflow is undefined and can turn an invalid runlist into a different set of physical clusters. Check the LCN addition for overflow before storing the next run. | 21 Oct |
| CVE-2026-72130 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into the rval[] flexible-array tail, so the minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its existing variable-length guard in nvmet_auth_challenge(). This is reachable only when in-band DH-HMAC-CHAP authentication is configured on the target. | 21 Oct |
| CVE-2026-72098 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | 21 Oct |
| CVE-2026-63979 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | 21 Oct |
| CVE-2026-63857 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed. | 21 Oct |
| CVE-2026-63825 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | 21 Oct |
| CVE-2026-72084 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | 19 Oct |
| CVE-2026-72083 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. | 19 Oct |
| CVE-2026-72069 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: locking/rt: Fix the incorrect RCU protection in rt_spin_unlock() rt_spin_unlock() releases the RCU protection before unlocking the lock. That opens the door for the following UAF scenario: T1 T2 spin_lock(&p->lock); rcu_read_lock(); invalidate(p); p = rcu_dereference(ptr); rcu_assign_pointer(ptr, NULL); if (!p) return; spin_unlock(&p->lock); spin_lock(&p->lock) lock(&lock->lock); rcu_read_lock(); kfree_rcu(p); rcu_read_unlock(); .... spin_unlock(&p->lock) rcu_read_unlock(); // Ends grace period rcu_do_batch() kfree(p); UAF -> rt_mutex_cmpxchg_release(&lock->lock...) Regular spinlocks keep preemption disabled accross the unlock operation, which provides full RCU protection, but the RT substitution fails to resemble that. Same applies for the rwlock substitution. Move the rcu_read_unlock() invocation past the unlock operations to match the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but that's harmless as the caller needs to hold RCU read lock across the lock operation. The migrate_enable() call stays before the unlock operation because there is no per CPU operation in the unlock path which would require migration to be kept disabled. | 19 Oct |
| CVE-2026-72065 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Validate the packet length reported by the NIC Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. | 19 Oct |
| CVE-2026-72064 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Sync page pool RX frags for CPU MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack. | 19 Oct |
| CVE-2026-72041 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: espintcp: use sk_msg_free_partial to fix partial send sk_msg_free_partial() ensures consistency of the skmsg at every iteration, without having to manually handle uncharges and offsets. This simplifies the code, and fixes some bugs in skmsg accounting when we don't send the full contents. | 19 Oct |
| CVE-2026-72020 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later. | 19 Oct |
| CVE-2026-64355 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP. | 19 Oct |
| CVE-2026-64303 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: terminate the RX channel on TX prepare failure path When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path. | 19 Oct |
| CVE-2026-64268 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | 19 Oct |
| CVE-2026-64113 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. | 19 Oct |
| CVE-2026-64102 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. | 19 Oct |
| CVE-2026-64047 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | 19 Oct |
| CVE-2026-64046 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | 19 Oct |
| CVE-2026-64007 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. | 19 Oct |
| CVE-2026-63994 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. | 19 Oct |
| CVE-2026-63993 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. | 19 Oct |
| CVE-2026-72014 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required. | 19 Oct |
| CVE-2026-68477 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipvs: fix more places with wrong ipv6 transport offsets Sashiko reports for more incorrect IPv6 transport offsets. The app code for TCP was assuming IPv4 network header even after the ipvsh argument was provided. This can cause problems with apps over IPv6. As for the only official app in the kernel tree (FTP) this problem is harmless because we use Netfilter to mangle the FTP ports and we do not adjust the TCP seq numbers. Also, provide correct offset of the ICMPV6 header in ip_vs_out_icmp_v6() for correct checksum checks when the IPv6 packet has extension headers. | 19 Oct |
| CVE-2026-68388 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. | 19 Oct |
| CVE-2026-68300 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: auth: verify auth requirement when auth_chunk is NULL sctp_auth_chunk_verify() returns true unconditionally when chunk->auth_chunk is NULL, silently skipping authentication. This is incorrect when: 1. skb_clone() failed in the BH receive path, leaving auth_chunk NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new connections, so the early sctp_auth_recv_cid() check cannot catch this. 2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never called and auth_chunk remains NULL. Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL: if authentication is required, return false to drop the chunk; otherwise continue normally. | 19 Oct |
| CVE-2026-68161 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | 19 Oct |
| CVE-2026-68160 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptrace, snaptrace + snaptrace_len, false, &realm)) { ... } ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad) with the attacker-supplied fake end e == snaptrace + snaptrace_len. With snaptrace_len == 0xFFFFFFFF the bound check is trivially satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past the legitimate msg->front buffer, and ri->num_snaps / ri->num_prior_parent_snaps then drive further out-of-bounds reads of the encoded snap arrays. The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks above the op switch each catch this OOB through their ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit behind a hdr.version-gated if, so a malicious or compromised MDS that sets msg->hdr.version = 1 reaches the IMPORT path with no version-gated decoder having validated snap_trace_len. The shape has been present since ceph_handle_caps() was introduced. Validate snap_trace_len against the message front buffer before consuming it, using the canonical ceph_decode_need() / ceph_has_room() helper. The helper bounds the length with subtraction (n <= end - p, guarded by end >= p) rather than pointer addition, so it is wrap-safe for the attacker-controlled u32 length on 32-bit builds where p + snap_trace_len could overflow the address space. This matches the rest of the ceph decode path (e.g. the pool_ns_len check a few lines below), and the existing goto bad cleanup already covers this exit path. | 19 Oct |
| CVE-2026-68159 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | 19 Oct |
| CVE-2026-68158 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | 19 Oct |
| CVE-2026-68156 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the old ceph_buffer and its vec.iov_base, but auth->authorizer_buf still points at that freed memory. A subsequent msgr1 reconnect can therefore queue the stale pointer and trigger a KASAN slab-use-after-free in _copy_from_iter() while tcp_sendmsg() copies the authorizer. Refresh auth->authorizer_buf and auth->authorizer_buf_len after a successful authorizer rebuild so the messenger sends the current buffer. | 19 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.