Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-64557 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb() l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after release_sock(parent). Once the parent lock is dropped the newly enqueued child socket sk is reachable via the accept queue, so another task can accept and free it before the callback dereferences sk, resulting in a use-after-free. Rework the ->new_connection() op so the core, rather than the callback, owns the child channel's lifetime. The op now receives a pre-allocated new_chan and returns an errno instead of allocating and returning a channel. l2cap_new_connection() allocates the child channel and links it into the conn list via __l2cap_chan_add() before invoking the callback, so the conn-list reference keeps the channel alive once release_sock(parent) exposes the socket to other tasks. Channel configuration that was duplicated in l2cap_sock_init() and the various new_connection callbacks is consolidated into l2cap_chan_set_defaults(), which now inherits from the parent channel when one is supplied. | 19 Oct |
| CVE-2026-53072 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock. | 19 Oct |
| CVE-2026-52918 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: serialize accept_q access bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. | 19 Oct |
| CVE-2026-31408 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold a reference under the lock. Fix by using sco_sock_hold() to take a reference before releasing the lock, and adding sock_put() on all exit paths. | 19 Oct |
| CVE-2026-80914 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise. | 19 Oct |
| CVE-2026-80683 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: give the socket its own sco_conn reference sco_conn_del() drops a reference it does not own. It takes one transient reference via sco_conn_hold_unless_zero() and releases it with the sco_conn_put() that follows sco_sock_hold(); the additional put in the !sk branch releases a second one: conn = sco_conn_hold_unless_zero(conn); ... sk = sco_sock_hold(conn); sco_conn_unlock(conn); sco_conn_put(conn); if (!sk) { sco_conn_put(conn); return; } When close() races the controller's Disconnection Complete, sco_chan_del() clears conn->sk and drops the socket's reference while sco_conn_del() is running. sco_conn_del() then sees sk == NULL, its own put drops the count to zero and frees the conn, and the second put writes to the freed kref: BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190 Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413 Workqueue: hci1 hci_rx_work Call Trace: sco_conn_put.part.0+0x1a/0x190 hci_disconn_complete_evt+0x1ee/0x3e0 hci_event_packet+0x54a/0x650 hci_rx_work+0x321/0x3d0 Allocated by task 413: sco_conn_add+0x72/0x1a0 sco_connect_cfm+0x88/0x670 Freed by task 413: sco_conn_del.isra.0+0x3f/0xf0 hci_disconn_complete_evt+0x1ee/0x3e0 refcount_t: underflow; use-after-free. The root cause is that the socket stores the connection without holding a reference of its own. __sco_chan_add() does: sco_pi(sk)->conn = conn; so the socket borrows whatever reference its caller happened to hold, and the callers paper over that with ad-hoc holds and puts. Give the socket a counted reference instead: __sco_chan_add() takes one and it is released together with the channel (sco_chan_del()) and in sco_sock_destruct(). With the socket holding its own reference, sco_conn_del() no longer needs the extra put and the redundant hold in sco_conn_ready() goes away. Making the socket own its reference means the connection is now actually freed on the error paths of sco_connect() where it used to leak, which in turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the hci_conn accounting balanced, make that ownership explicit as well: sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for its lifetime. sco_connect() hands over the reference returned by hci_connect_sco() and no longer drops it on the error paths; sco_connect_cfm(), which is not given a reference, takes one with hci_conn_hold() before handing it to sco_conn_add() (and drops it again if the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready() is removed. Every reference then has a single, clear owner. | 16 Oct |
| CVE-2026-74490 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. | 16 Oct |
| CVE-2026-72124 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | 16 Oct |
| CVE-2026-5066 | 8.8 high | 0.00% | zephyrproject, zephyr | A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution. | 15 Oct |
| CVE-2025-68304 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: lookup hci_conn on RX path on protocol side The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't ensure hci_conn* is not concurrently modified/deleted. This locking appears to be leftover from before conn_hash started using RCU commit bf4c63252490b ("Bluetooth: convert conn hash to RCU") and not clear if it had purpose since then. Currently, there are code paths that delete hci_conn* from elsewhere than the ordered hdev->workqueue where the RX work runs in. E.g. commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync") introduced some of these, and there probably were a few others before it. It's better to do the locking so that even if these run concurrently no UAF is possible. Move the lookup of hci_conn and associated socket-specific conn to protocol recv handlers, and do them within a single critical section to cover hci_conn* usage and lookup. syzkaller has reported a crash that appears to be this issue: [Task hdev->workqueue] [Task 2] hci_disconnect_all_sync l2cap_recv_acldata(hcon) hci_conn_get(hcon) hci_abort_conn_sync(hcon) hci_dev_lock hci_dev_lock hci_conn_del(hcon) v-------------------------------- hci_dev_unlock hci_conn_put(hcon) conn = hcon->l2cap_data (UAF) | 15 Oct |
| CVE-2026-31629 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through. | 15 Oct |
| CVE-2026-64010 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc() A race condition exists in the NFC LLCP connection state machine where the connection acceptance packet (CC) can be processed concurrently with socket release. This can lead to a use-after-free of the socket object. When nfc_llcp_recv_cc() moves the socket from the connecting_sockets list to the sockets list, it does so without holding the socket lock. If llcp_sock_release() is executing concurrently, it might have already unlinked the socket and dropped its references, which can result in nfc_llcp_recv_cc() linking a freed socket into the live list. Fix this by holding lock_sock() during the state transition and list movement in nfc_llcp_recv_cc(). After acquiring the lock, check if the socket is still hashed to ensure it hasn't already been unlinked and marked for destruction by the release path. This aligns the locking pattern with recv_hdlc() and recv_disc(). | 13 Oct |
| CVE-2026-73160 | 8.7 high | 0.00% | no CPE yet | Affected versions of cti-transmute contain an SSRF vulnerability in the /fetch_misp_event and /misp_search_events endpoints. The URL validation routine checked whether a supplied hostname was itself an IP literal and rejected private, loopback, link-local, or reserved IPs. However, ordinary domain names were accepted without resolving them first. An attacker could therefore use a hostname whose DNS record pointed to an internal address and cause the cti-transmute server to issue requests into its internal network. The commit explicitly states that anonymous callers could make the server request the internal target and read the response. The fix resolves hostnames using socket.getaddrinfo(), checks that every resolved address is globally routable, and additionally places @login_required on both affected MISP fetch/search routes. | Sat 24 Oct |
| CVE-2026-108070 | 8.7 high | 0.00% | no CPE yet | A vulnerability involving improper access control in the TSplus Remote Access web server that allows an unauthenticated remote attacker to access internal resources protected by manipulated paths through the /socket.io/JWN/ endpoint, bypassing the access restrictions intended for certain internal resources. | 15 Oct |
| CVE-2025-10657 | 8.7 high | 0.00% | no CPE yet | In a hardened Docker environment, with Enhanced Container Isolation ( ECI https://docs.docker.com/enterprise/security/hardened-desktop/enhanced-container-isolation/ ) enabled, an administrator can utilize the command restrictions feature https://docs.docker.com/enterprise/security/hardened-desktop/enhanced-container-isolation/config/#command-restrictions to restrict commands that a container with a Docker socket mount may issue on that socket. Due to a software bug, the configuration to restrict commands was ignored when passed to ECI, allowing any command to be executed on the socket. This grants excessive privileges by permitting unrestricted access to powerful Docker commands. The vulnerability affects only Docker Desktop 4.46.0 users that have ECI enabled and are using the Docker socket command restrictions feature. In addition, since ECI restricts mounting the Docker socket into containers by default, it only affects containers which are explicitly allowed by the administrator to mount the Docker socket. | 9 Oct |
| CVE-2026-61542 | 8.6 high | 0.00% | no CPE yet | Gearboy is a Game Boy, Game Boy Color, and Super Game Boy emulator and debugger with an embedded MCP server. Gearsystem, the affected component, has an optional `--mcp-http` mode that accepts unauthenticated MCP requests from any reachable network peer despite localhost-only documentation and logging. In the described `platforms/shared/desktop/mcp/mcp_transport.h` transport, the socket binds `INADDR_ANY`, normally on port 7777, and POST requests to `/mcp` reach dispatch without `Authorization`, `Host`, or `Origin` checks. Responses and OPTIONS advertise `Access-Control-Allow-Origin: *`. A peer can initialize an MCP session and invoke exposed emulator/debugging operations; even a garbage bearer token does not block dispatch, while a loopback-bind negative control prevents network access. The reported impact is bounded to the emulator process, debugging state, and local files accepted as media, rather than demonstrated host code execution. Gearboy 3.8.7 contains a patch. | Wed 28 Oct |
| CVE-2026-63388 | 8.4 high | 0.00% | no CPE yet | Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a heap out-of-bounds write in bufferevent_sock.c when bufferevent_socket_set_conn_address_ copies a kernel-supplied AF_UNIX peer address into bufferevent_private.conn_address. Release builds compiled with NDEBUG disable the EVUTIL_ASSERT length guard, and the evhttp accept path can pass a 110-byte sockaddr from accept() into the 28-byte field. An unauthenticated local peer able to connect to an AF_UNIX listener can overwrite the adjacent dns_request pointer and heap data, causing memory corruption with confidentiality, integrity, and availability impact. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. | Mon 26 Oct |
| CVE-2026-64045 | 8.4 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. | Sat 24 Oct |
| CVE-2026-99042 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code. | Sat 24 Oct |
| CVE-2026-8718 | 8.4 high | 0.00% | no CPE yet | tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the caller-supplied optval directly to mbedtls_ssl_get_peer_cid() without verifying the buffer was at least MBEDTLS_SSL_CID_OUT_LEN_MAX (default 32) bytes. mbedtls_ssl_get_peer_cid() copies the peer-negotiated DTLS Connection ID (length 1..MBEDTLS_SSL_CID_OUT_LEN_MAX) into that buffer without a destination-size parameter, so a caller-supplied optlen smaller than the CID causes a write of up to 31 bytes past the buffer end. In CONFIG_USERSPACE builds the getsockopt syscall verifier (z_vrfy_zsock_getsockopt) bounce-buffers the user's optval into a kernel allocation of exactly optlen bytes (k_usermode_alloc_from_copy -> z_thread_malloc), so an unprivileged user thread that passes a small optlen on a connected DTLS socket with Connection ID enabled induces a kernel-heap buffer overflow, with the overflowing content being the remote peer's CID. The defect requires CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID, an established DTLS session with a negotiated peer CID, and (for the kernel-crossing case) CONFIG_USERSPACE. Introduced when the TLS_DTLS_CID option was added (v3.5.0). The fix rejects callers whose optlen is below MBEDTLS_SSL_CID_OUT_LEN_MAX with -EINVAL. | Sat 24 Oct |
| CVE-2026-64548 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data() When the scatterlist ring is full or nearly full, bpf_msg_push_data() enters a copy fallback path and computes copy + len for the page allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING and both are u32, a crafted len can wrap the sum to a small value, causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add an overflow check before the allocation. | 19 Oct |
| CVE-2026-89904 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix acpi_package_ids[] array overflow With LoongArch virt machine, a typical setting is one core per socket, there will max 256 sockets (packages) on one VM. With PPTT acpi table, array acpi_package_ids[] will be overflowed. Here change the array size of acpi_package_ids[] with the max value of MAX_PACKAGES and KVM_MAX_VCPUS. | 19 Oct |
| CVE-2026-74631 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: smc: fix splice entry lifetime imbalance in smc_rx_splice smc_rx_splice() passes pages to splice_to_pipe() before taking the references that cover the lifetime of each splice entry. In the VM-backed RMB path, splice_to_pipe() may drop unqueued entries through smc_rx_spd_release(), while queued entries are released later via the pipe buffer callback. The old post-splice accounting also derives the number of queued VM pages from an offset mutated while building the descriptor, and a multi-page splice pairs one sock_hold() with multiple sock_put() calls. Take the page and socket references for every candidate entry before splice_to_pipe(), and drop the matching private state, page reference, and socket reference from smc_rx_spd_release() for entries that never get queued. This fixes a refcount imbalance that can underflow page refcounts and trigger a use-after-free. | 16 Oct |
| CVE-2026-74589 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership. | 16 Oct |
| CVE-2026-74256 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop. | 16 Oct |
| CVE-2026-72243 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: selinux: check connect-related permissions on TCP Fast Open Similar to Landlock, SELinux was not updated when TCP Fast Open support was introduced to ensure connect-related permissions are checked when using TCP Fast Open. Update its socket_sendmsg() hook to call selinux_socket_connect() when MSG_FASTOPEN is passed. | 16 Oct |
| CVE-2026-72183 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). For a process group (PIDTYPE_PGID) pid_task() returns only one member; recording is skipped whenever that member shares the caller's thread group, and hook_file_send_sigiotask() then lets the signal fan out to the whole group unchecked. Record the domain for every non single-process target so the scope is enforced against each group member at delivery time. That recording is necessary but not sufficient on its own: the kernel signals a process group through its members' thread-group leaders, and the leader of the registrant's own process can carry a different Landlock domain than the sibling thread that armed the owner. domain_is_scoped() would then deny that leader, even though commit 18eb75f3af40 ("landlock: Always allow signals between threads of the same process") requires same-process delivery to be allowed. hook_task_kill() avoids this by evaluating same_thread_group() live, per recipient; the SIGIO path instead delegates the whole decision to a single registration-time check, which a process-group fan-out cannot honor. So also record the registrant's thread group next to its domain and exempt it at delivery: hook_file_send_sigiotask() allows the signal whenever the recipient belongs to the registrant's own process, restoring the same-process guarantee while keeping out-of-domain group members blocked. The direct kill() path (hook_task_kill) already evaluates the live domain and is unaffected. [mic: Check pid_type earlier and improve comment, fix commit message, fix comment formatting] | 16 Oct |
| CVE-2026-116794 | 8.3 high | 0.00% | no CPE yet | russh is a Rust SSH client and server library that includes an SSH agent protocol implementation. From 0.50.0-beta.12 until 0.65.0, the agent server's Connection::try_sign path in russh/src/keys/agent/server.rs recognizes SSH_AGENT_CONSTRAIN_CONFIRM but returns a hard-coded successful result instead of calling Agent::confirm. In applications that override Agent::confirm to require user approval or another policy check, a process that can reach the agent socket, including the remote side of a forwarded agent, can use a key added through ssh-add -c without that check and can authenticate or sign data as the user while the key remains loaded. The separate Agent::confirm_request hook still runs for every signing request, so checks implemented there remain effective, and implementations that retain the default always-successful Agent::confirm do not lose an approval check through this regression. This issue is fixed in version 0.65.0. | Wed 28 Oct |
| CVE-2026-114088 | 8.3 high | 0.00% | no CPE yet | Trigger.dev before 4.5.4 contains a hardcoded default secret vulnerability in the /coordinator Socket.IO namespace that allows unauthenticated attackers to connect using the published coordinator-secret value. Attackers can emit READY_FOR_EXECUTION to retrieve decrypted run environment variables or send TASK_RUN_FAILED_TO_RUN and similar events to tamper with arbitrary runs. | Tue 27 Oct |
| CVE-2026-28525 | 8.2 high | 0.00% | swupdate | SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read past the allocated receive buffer to a local IPC socket. | Mon 26 Oct |
| CVE-2026-53657 | 8.2 high | 0.00% | no CPE yet | Lima launches Linux virtual machines, typically on macOS, for running containerd. Prior to 2.1.3, on an instance of Lima running with the qemu driver, an arbitrary user in the VM could access /run/lima-guestagent.sock when the guest agent is enabled, which could result in running arbitrary commands with root privileges in the VM because the guest agent socket provides tunneling for arbitrary addresses, including Unix socket addresses for privileged daemons like D-Bus. This issue is fixed in version 2.1.3. | Sun 25 Oct |
| CVE-2026-70637 | 8.2 high | 0.00% | no CPE yet | LightFTP through 2.4 contains multiple data race vulnerabilities in ftpserv.c that allow anonymous attackers to cause undefined behavior by issuing LIST followed by ABOR commands without authentication. The control thread closes data_socket and file_fd descriptors while worker threads concurrently operate on the same fields in worker_thread_cleanup, allowing stale file descriptors to be reassigned by the OS and subsequently used by worker threads on unrelated resources, resulting in potential denial of service. | Sat 24 Oct |
| CVE-2026-68118 | 8.2 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | 19 Oct |
| CVE-2026-98070 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock_sock(), so a sender inside tcp_sendmsg() can never be waited on while we hold the socket lock. Two details of the old code go away with the same change: - t_sock is now read only after the lock is acquired. The old code cached it before waiting; the teardown in rds_conn_shutdown() releases that socket and clears t_sock, so a pointer cached before the wait can be stale by the time the accept path resumes. Reading it under RDS_IN_XMIT is what makes the exclusion complete once the teardown owns the same lock, which the next patch arranges; until then the teardown still only samples the bit, and the two paths remain as exposed to each other as they are today. - The old !osock early path called rds_send_path_reset() with no serialization at all. It now runs under the lock like the normal path. The conditional RDS_CONN_RESETTING transition of the previous patch happens before the socket check either way: a path found without a socket is either still connecting (its reconnect worker blocked on t_conn_path_lock) and legitimately goes RESETTING -> UP on the new socket, or it has been torn down meanwhile and is dropped. The in-function comment describing the old wait-based quiesce is rewritten to describe the lock-based one, and the stale block comment above the function (which still described a return value and an incomplete list of t_sock writers) is refreshed to name all four writers - the connect, accept, teardown and swap paths - and what serializes each of them. | 19 Oct |
| CVE-2026-81003 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sockets - Fabric noise on the IQD fabric, where bogus replies are sent - killing established connections Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a namespace can be delivered to an IUCV socket. So a process in an unprivileged user and network namespace holding only the CAP_NET_RAW capability valid within that namespace can send a raw ETH_P_AF_IUCV frame on its own lo device and have it matched against init_net sockets. Fix all three by skipping any socket whose hs_dev does not match the ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress dev is never NULL, so classic sockets are skipped automatically. An unbound HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket is only reachable from the exact IQD device it was bound to. Because hs_dev is always a device in init_net (iucv_sock_bind() scans for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress device belongs to another namespace never matches any socket. Note that AF_IUCV over HiperSockets provides no per-connection authentication: no sequence numbers, no TLS, no nonce. The four name fields identifying a connection are exchanged in plaintext on the shared HiperSockets segment (VCHID). Any host on the same HiperSockets segment could spoof any frame type against an existing connection. That is a protocol-level property unchanged by this patch. The fix reduces the attack surface to peers present on the same HiperSockets segment. | 19 Oct |
| CVE-2026-64406 | 8.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in bt_accept_dequeue() bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths. | 19 Oct |
| CVE-2026-53357 | 8.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. | 19 Oct |
| CVE-2026-53256 | 8.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). | 19 Oct |
| CVE-2026-90092 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case. | 19 Oct |
| CVE-2026-90091 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan For L2CAP sockets without owning sk->sk_socket, reading l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() -> l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks, but access in l2cap_sock_cleanup_listen() has unsafe lockless read. [Task 1] [Task 2 (hdev->workqueue)] l2cap_sock_release(parent) l2cap_disconn_cfm l2cap_sock_cleanup_listen l2cap_conn_del bt_accept_dequeue l2cap_chan_del lock_sock(sk) l2cap_sock_teardown_cb bt_accept_unlink bt_sk(sk)->parent = NULL release_sock(sk) ----------------> lock_sock(sk) parent = /* NULL */ lock_sock(sk) <--------------------- release_sock(sk) sock_set_flag(sk, SOCK_ZAPPED) l2cap_sock_close_cb l2cap_sock_kill(sk) l2cap_sock_put_chan chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL l2cap_chan_hold_unless_zero l2cap_put_chan(chan) kref_get_unless_zero(&chan->ref) Task 1 may observe NULL which causes null-ptr-deref. Fix the race by taking lock_sock() in l2cap_sock_kill() to synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL. Clarify code comments vs. locking. | 19 Oct |
| CVE-2025-40309 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | 15 Oct |
| CVE-2023-54164 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated--- | 15 Oct |
| CVE-2024-53168 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0 Read of size 1 at addr ffff888111f322cd by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 Call Trace: <IRQ> dump_stack_lvl+0x68/0xa0 print_address_description.constprop.0+0x2c/0x3d0 print_report+0xb4/0x270 kasan_report+0xbd/0xf0 tcp_write_timer_handler+0x156/0x3e0 tcp_write_timer+0x66/0x170 call_timer_fn+0xfb/0x1d0 __run_timers+0x3f8/0x480 run_timer_softirq+0x9b/0x100 handle_softirqs+0x153/0x390 __irq_exit_rcu+0x103/0x120 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242 RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0 default_idle_call+0x6b/0xa0 cpuidle_idle_call+0x1af/0x1f0 do_idle+0xbc/0x130 cpu_startup_entry+0x33/0x40 rest_init+0x11f/0x210 start_kernel+0x39a/0x420 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x97/0xa0 common_startup_64+0x13e/0x141 </TASK> Allocated by task 595: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x87/0x90 kmem_cache_alloc_noprof+0x12b/0x3f0 copy_net_ns+0x94/0x380 create_new_namespaces+0x24c/0x500 unshare_nsproxy_namespaces+0x75/0xf0 ksys_unshare+0x24e/0x4f0 __x64_sys_unshare+0x1f/0x30 do_syscall_64+0x70/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 100: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x54/0x70 kmem_cache_free+0x156/0x5d0 cleanup_net+0x5d3/0x670 process_one_work+0x776/0xa90 worker_thread+0x2e2/0x560 kthread+0x1a8/0x1f0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Reproduction script: mkdir -p /mnt/nfsshare mkdir -p /mnt/nfs/netns_1 mkfs.ext4 /dev/sdb mount /dev/sdb /mnt/nfsshare systemctl restart nfs-server chmod 777 /mnt/nfsshare exportfs -i -o rw,no_root_squash *:/mnt/nfsshare ip netns add netns_1 ip link add name veth_1_peer type veth peer veth_1 ifconfig veth_1_peer 11.11.0.254 up ip link set veth_1 netns netns_1 ip netns exec netns_1 ifconfig veth_1 11.11.0.1 ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \ --tcp-flags FIN FIN -j DROP (note: In my environment, a DESTROY_CLIENTID operation is always sent immediately, breaking the nfs tcp connection.) ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \ 11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1 ip netns del netns_1 The reason here is that the tcp socket in netns_1 (nfs side) has been shutdown and closed (done in xs_destroy), but the FIN message (with ack) is discarded, and the nfsd side keeps sending retransmission messages. As a result, when the tcp sock in netns_1 processes the received message, it sends the message (FIN message) in the sending queue, and the tcp timer is re-established. When the network namespace is deleted, the net structure accessed by tcp's timer handler function causes problems. To fix this problem, let's hold netns refcnt for the tcp kernel socket as done in other modules. This is an ugly hack which can easily be backported to earlier kernels. A proper fix which cleans up the interfaces will follow, but may not be so easy to backport. | 8 h ago |
| CVE-2024-53091 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes | 8 h ago |
| CVE-2024-46765 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: ice: protect XDP configuration with a mutex The main threat to data consistency in ice_xdp() is a possible asynchronous PF reset. It can be triggered by a user or by TX timeout handler. XDP setup and PF reset code access the same resources in the following sections: * ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked * ice_vsi_rebuild() for the PF VSI - not protected * ice_vsi_open() - already rtnl-locked With an unfortunate timing, such accesses can result in a crash such as the one below: [ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14 [ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18 [Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms [ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001 [ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14 [ +0.394718] ice 0000:b1:00.0: PTP reset successful [ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ +0.000045] #PF: supervisor read access in kernel mode [ +0.000023] #PF: error_code(0x0000) - not-present page [ +0.000023] PGD 0 P4D 0 [ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1 [ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000036] Workqueue: ice ice_service_task [ice] [ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice] [...] [ +0.000013] Call Trace: [ +0.000016] <TASK> [ +0.000014] ? __die+0x1f/0x70 [ +0.000029] ? page_fault_oops+0x171/0x4f0 [ +0.000029] ? schedule+0x3b/0xd0 [ +0.000027] ? exc_page_fault+0x7b/0x180 [ +0.000022] ? asm_exc_page_fault+0x22/0x30 [ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice] [ +0.000194] ice_free_tx_ring+0xe/0x60 [ice] [ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice] [ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice] [ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice] [ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [ +0.000145] ice_rebuild+0x18c/0x840 [ice] [ +0.000145] ? delay_tsc+0x4a/0xc0 [ +0.000022] ? delay_tsc+0x92/0xc0 [ +0.000020] ice_do_reset+0x140/0x180 [ice] [ +0.000886] ice_service_task+0x404/0x1030 [ice] [ +0.000824] process_one_work+0x171/0x340 [ +0.000685] worker_thread+0x277/0x3a0 [ +0.000675] ? preempt_count_add+0x6a/0xa0 [ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0.000679] ? __pfx_worker_thread+0x10/0x10 [ +0.000653] kthread+0xf0/0x120 [ +0.000635] ? __pfx_kthread+0x10/0x10 [ +0.000616] ret_from_fork+0x2d/0x50 [ +0.000612] ? __pfx_kthread+0x10/0x10 [ +0.000604] ret_from_fork_asm+0x1b/0x30 [ +0.000604] </TASK> The previous way of handling this through returning -EBUSY is not viable, particularly when destroying AF_XDP socket, because the kernel proceeds with removal anyway. There is plenty of code between those calls and there is no need to create a large critical section that covers all of them, same as there is no need to protect ice_vsi_rebuild() with rtnl_lock(). Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp(). Leaving unprotected sections in between would result in two states that have to be considered: 1. when the VSI is closed, but not yet rebuild 2. when VSI is already rebuild, but not yet open The latter case is actually already handled through !netif_running() case, we just need to adjust flag checking a little. The former one is not as trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of hardware interaction happens, this can make adding/deleting rings exit with an error. Luckily, VSI rebuild is pending and can apply new configuration for us in a managed fashion. Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to indicate that ice_x ---truncated--- | 8 h ago |
| CVE-2023-53394 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix crash on regular rq reactivation When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. | 8 h ago |
| CVE-2026-88147 | 7.8 high | 0.00% | microsoft, windows_10_1607, windows_10_1809, windows_10_21h2 | Heap-based buffer overflow in Windows Secure Socket Tunneling Protocol (SSTP) allows an authorized attacker to elevate privileges locally. | Wed 28 Oct |
| CVE-2023-53698 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xsk: fix refcount underflow in error path Fix a refcount underflow problem reported by syzbot that can happen when a system is running out of memory. If xp_alloc_tx_descs() fails, and it can only fail due to not having enough memory, then the error path is triggered. In this error path, the refcount of the pool is decremented as it has incremented before. However, the reference to the pool in the socket was not nulled. This means that when the socket is closed later, the socket teardown logic will think that there is a pool attached to the socket and try to decrease the refcount again, leading to a refcount underflow. I chose this fix as it involved adding just a single line. Another option would have been to move xp_get_pool() and the assignment of xs->pool to after the if-statement and using xs_umem->pool instead of xs->pool in the whole if-statement resulting in somewhat simpler code, but this would have led to much more churn in the code base perhaps making it harder to backport. | Wed 28 Oct |
| CVE-2026-98112 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | Wed 28 Oct |
| CVE-2026-63945 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites. | Mon 26 Oct |
Download these 628 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.