Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-63807 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization. | 19 Oct |
| CVE-2026-45945 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix race condition during PASID entry replacement The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing an active PASID entry (e.g., during domain replacement), the current implementation calculates a new entry on the stack and copies it to the table using a single structure assignment. struct pasid_entry *pte, new_pte; pte = intel_pasid_get_entry(dev, pasid); pasid_pte_config_first_level(iommu, &new_pte, ...); *pte = new_pte; Because the hardware may fetch the 512-bit PASID entry in multiple 128-bit chunks, updating the entire entry while it is active (Present bit set) risks a "torn" read. In this scenario, the IOMMU hardware could observe an inconsistent state — partially new data and partially old data — leading to unpredictable behavior or spurious faults. Fix this by removing the unsafe "replace" helpers and following the "clear-then-update" flow, which ensures the Present bit is cleared and the required invalidation handshake is completed before the new configuration is applied. | 19 Oct |
| CVE-2026-31773 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | 19 Oct |
| CVE-2026-46113 | 8.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | 19 Oct |
| CVE-2026-90357 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement The flow is added to dev->twt_list before sending the agreement to the firmware, but the error path leaves it linked while flowid_mask is never set. The flow slot can then be reused and memset while still on the list, corrupting twt_list, and station removal leaves a dangling entry behind that mt7915_mac_twt_sched_list_add() later walks. | 19 Oct |
| CVE-2026-72124 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | 16 Oct |
| CVE-2023-54262 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't clone flow post action attributes second time The code already clones post action attributes in mlx5e_clone_flow_attr_for_post_act(). Creating another copy in mlx5e_tc_post_act_add() is a erroneous leftover from original implementation. Instead, assign handle->attribute to post_attr provided by the caller. Note that cloning the attribute second time is not just wasteful but also causes issues like second copy not being properly updated in neigh update code which leads to following use-after-free: Feb 21 09:02:00 c-237-177-40-045 kernel: BUG: KASAN: use-after-free in mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_free_info+0x2a/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: ____kasan_slab_free+0x11a/0x1b0 Feb 21 09:02:00 c-237-177-40-045 kernel: page dumped because: kasan: bad access detected Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 8833): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xf2ff71), err(-22) Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0 enp8s0f0: Failed to add post action rule Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_core 0000:08:00.0: mlx5e_tc_encap_flows_add:190:(pid 8833): Failed to update flow post acts, -22 Feb 21 09:02:00 c-237-177-40-045 kernel: Call Trace: Feb 21 09:02:00 c-237-177-40-045 kernel: <TASK> Feb 21 09:02:00 c-237-177-40-045 kernel: dump_stack_lvl+0x57/0x7d Feb 21 09:02:00 c-237-177-40-045 kernel: print_report+0x170/0x471 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_report+0xbb/0x1a0 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_set_fte+0x200d/0x24c0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: ? __module_address.part.0+0x62/0x200 Feb 21 09:02:00 c-237-177-40-045 kernel: ? mlx5_cmd_stub_create_flow_table+0xd0/0xd0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: ? __raw_spin_lock_init+0x3b/0x110 Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_cmd_create_fte+0x80/0xb0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: add_rule_fg+0xe80/0x19c0 [mlx5_core] -- Feb 21 09:02:00 c-237-177-40-045 kernel: Allocated by task 13476: Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_stack+0x1e/0x40 Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_set_track+0x21/0x30 Feb 21 09:02:00 c-237-177-40-045 kernel: __kasan_kmalloc+0x7a/0x90 Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5_packet_reformat_alloc+0x7b/0x230 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_tun_create_header_ipv4+0x977/0xf10 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_attach_encap+0x15b4/0x1e10 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: post_process_attr+0x305/0xa30 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_tc_add_fdb_flow+0x4c0/0xcf0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_configure_flower+0xcaa/0x4b90 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cls_flower+0x99/0x1b0 [mlx5_core] Feb 21 09:02:00 c-237-177-40-045 kernel: mlx5e_rep_setup_tc_cb+0x133/0x1e0 [mlx5_core] -- Feb 21 09:02:00 c-237-177-40-045 kernel: Freed by task 8833: Feb 21 09:02:00 c-237-177-40-045 kernel: kasan_save_s ---truncated--- | 15 Oct |
| CVE-2026-109371 | 8.8 high | 0.00% | no CPE yet | ZITADEL 3.0.0 before 4.18.0 contains a missing authentication vulnerability in the hosted Login V1 UI, where the change-username handler acts on the account bound to a login flow before any factor is verified. Unauthenticated attackers can submit a victim's login name and then post a new username to rename any active human user, including administrators, locking them out. | 15 Oct |
| CVE-2025-68158 | 8.8 high | 0.00% | authlib | Authlib is a Python library which builds OAuth and OpenID Connect servers. In versions 1.0.0 through 1.6.5, cache-backed state/request-token storage is not tied to the initiating user session, so CSRF is possible for any attacker that has a valid state (easily obtainable via an attacker-initiated authentication flow). When a cache is supplied to the OAuth client registry, FrameworkIntegration.set_state_data writes the entire state blob under _state_{app}_{state}, and get_state_data ignores the caller’s session altogether. This issue has been patched in version 1.6.6. | 14 Oct |
| CVE-2025-68481 | 8.8 high | 0.00% | fastapi-users_project, fastapi_users | FastAPI Users allows users to quickly add a registration and authentication system to their FastAPI project. Prior to version 15.0.2, the OAuth login state tokens are completely stateless and carry no per-request entropy or any data that could link them to the session that initiated the OAuth flow. `generate_state_token()` is always called with an empty `state_data` dict, so the resulting JWT only contains the fixed audience claim plus an expiration timestamp. On callback, the library merely checks that the JWT verifies under `state_secret` and is unexpired; there is no attempt to match the state value to the browser that initiated the OAuth request, no correlation cookie, and no server-side cache. Any attacker can hit `/authorize`, capture the server-generated state, finish the upstream OAuth flow with their own provider account, and then trick a victim into loading `.../callback?code=<attacker_code>&state=<attacker_state>`. Because the state JWT is valid for any client for \~1 hour, the victim’s browser will complete the flow. This leads to login CSRF. Depending on the app’s logic, the login CSRF can lead to an account takeover of the victim account or to the victim user getting logged in to the attacker's account. Version 15.0.2 contains a patch for the issue. | 13 Oct |
| CVE-2026-13212 | 8.8 high | 0.00% | no CPE yet | The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len). Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt. The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport. | 12 Oct |
| CVE-2026-110803 | 8.7 high | 0.00% | no CPE yet | VaadinService.requestEnd() in Vaadin Framework 8 locks the session and then reads the v-uiId request parameter outside the block that releases the lock. A request carrying a non-numeric v-uiId makes Integer.parseInt throw while the session lock is held, so the lock is never released and the container thread returns to its pool still owning it. Every later request to that session then blocks forever in VaadinService.lockSession(), and repeating the request exhausts the thread pool and takes the application down. No authentication is required: a session cookie, which any client obtains with a single request, is enough. Vaadin 10 and later are not affected, because Flow releases the lock in a finally block and does not read that parameter there, and Vaadin Framework 7 is not affected either. Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include: Product version Vaadin Framework 8.16.0 - 8.32.1 Mitigation Upgrade to 8.32.2 Vaadin Framework 7 and Vaadin 10 and later do not carry this behaviour and need no upgrade for this issue. Artifacts Maven coordinates / Vulnerable versions / Fixed version com.vaadin:vaadin-server / 8.16.0 - 8.32.1 / >=8.32.2 com.vaadin:vaadin-server-mpr-jakarta / 8.18.0 - 8.32.1 / >=8.32.2 | 21 h ago |
| CVE-2026-114089 | 8.7 high | 0.00% | no CPE yet | Trigger.dev before 4.5.2 contains a cross-site request forgery vulnerability in the CLI authorization-code flow because loading /account/authorization-code/<code> mints a Personal Access Token without any consent step. Attackers mint an unauthenticated code, lure a logged-in user to that URL, then retrieve the victim's PAT from the unauthenticated /api/v1/token endpoint to take over the account. | Wed 28 Oct |
| CVE-2026-34046 | 8.7 high | 0.00% | langflow, langflow-base | Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to version 1.5.1, the `_read_flow` helper in `src/backend/base/langflow/api/v1/flows.py` branched on the `AUTO_LOGIN` setting to decide whether to filter by `user_id`. When `AUTO_LOGIN` was `False` (i.e., authentication was enabled), neither branch enforced an ownership check — the query returned any flow matching the given UUID regardless of who owned it. This allowed any authenticated user to read any other user's flow, including embedded plaintext API keys; modify the logic of another user's AI agents, and/or delete flows belonging to other users. The vulnerability was introduced by the conditional logic that was meant to accommodate public/example flows (those with `user_id = NULL`) under auto-login mode, but inadvertently left the authenticated path without an ownership filter. The fix in version 1.5.1 removes the `AUTO_LOGIN` conditional entirely and unconditionally scopes the query to the requesting user. | Mon 26 Oct |
| CVE-2026-33790 | 8.7 high | 0.00% | juniper, junos | An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition. During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart. This issue cannot be triggered using IPv4 nor other IPv6 traffic. This issue affects Junos OS on SRX Series: * all versions before 21.2R3-S10, * all versions of 21.3, * from 21.4 before 21.4R3-S12, * all versions of 22.1, * from 22.2 before 22.2R3-S8, * all versions of 22.4, * from 22.4 before 22.4R3-S9, * from 23.2 before 23.2R2-S6, * from 23.4 before 23.4R2-S7, * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2-S3, * from 25.2 before 25.2R1-S2, 25.2R2. | Mon 26 Oct |
| CVE-2026-41278 | 8.7 high | 0.00% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, the GET /api/v1/public-chatflows/:id endpoint returns the full chatflow object without sanitization for public chatflows. Docker validation revealed this is worse than initially assessed: the sanitizeFlowDataForPublicEndpoint function does NOT exist in the released v3.0.13 Docker image. Both public-chatflows AND public-chatbotConfig return completely raw flowData including credential IDs, plaintext API keys, and password-type fields. This vulnerability is fixed in 3.1.0. | Mon 26 Oct |
| CVE-2026-77052 | 8.7 high | 0.00% | no CPE yet | boneIO Black exposes a Node-RED instance without authentication at the /nodered/ path through a Caddy reverse proxy. The Node-RED Admin API allows deploying flows that can execute arbitrary system commands. An unauthenticated attacker on the local network can deploy a malicious flow to achieve remote code execution and gain full control over the home automation system. This issue was fixed in version 1.6.0. | Mon 26 Oct |
| CVE-2026-57023 | 8.7 high | 0.00% | juniper, junos | An Improper Validation of Specified Quantity in Input vulnerability in the TCP proxy plugin of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial of Service (DoS). When TCP proxy is engaged in a flow session, to support ALGs, Advanced Anti-Malware, ICAP or UTM, a TCP packet with specifically malformed TCP header will cause flow processing daemon (flowd) to crash and restart. This causes a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX with SPC3, and SRX Series: * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. This issue does not affect releases before 23.4R1. | Sun 25 Oct |
| CVE-2026-57026 | 8.7 high | 0.00% | juniper, junos | An Improper Validation of Syntactic Correctness of Input vulnerability in the SIP plugin of Juniper Networks Junos OS on MX Series with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).If the SIP ALG is enabled on an affected device, the processing of a malformed SIP invite packet will cause a flow processing daemon (flowd) crash and restart. This leads to a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX Series with SPC3 and SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S2. | Sun 25 Oct |
| CVE-2026-59233 | 8.7 high | 0.00% | no CPE yet | Missing Authorization in the permission management component in Roskus Prospero Flow CRM before 5.2.1 allows any authenticated user to grant any role, including their own, the complete set of application permissions via a crafted POST request to the permission save endpoint, which performs no authorization check before synchronizing the submitted permissions to the specified role. | Sat 24 Oct |
| CVE-2026-55839 | 8.7 high | 0.00% | no CPE yet | Kestra is an open-source, event-driven orchestration platform. Prior to 1.3.24, Kestra's custom Markdown parser in ui/src/utils/markdown_plugins/link.ts allows a user with permission to create or update a Flow description to inject JavaScript event-handler attributes through the custom [[link]] syntax, causing stored cross-site scripting when another user opens the description or information panel in the Flow list. This issue is fixed in version 1.3.24. | 22 Oct |
| CVE-2026-111884 | 8.7 high | 0.00% | no CPE yet | phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta does not require the current password when changing an account e-mail in the user control panel (UserController::updateData, api/user/data/update), checking only the session and CSRF token. An attacker with a hijacked session can set the e-mail to their own mailbox and use the password-reset flow to take over non-2FA accounts, including superadmin. | 18 Oct |
| CVE-2026-108550 | 8.7 high | 0.00% | no CPE yet | SkillHub before 0.2.22 contains an incorrect authorization vulnerability in AccountMergeService and AccountMergeController that allows authenticated attackers to take over other accounts by abusing the merge flow. Attackers can call the merge initiate endpoint with a target username or OAuth identity, receive the verification token directly, and confirm the merge to inherit the victim's API tokens, roles and namespace ownership. | 16 Oct |
| CVE-2026-103903 | 8.7 high | 0.00% | no CPE yet | An incorrect authorization vulnerability in the WinBox authentication flow of MikroTik RouterOS allows a remote authenticated attacker with credentials for a low-privilege account permitted to use WinBox to obtain the authorization policy of a different existing account. The stage-one EC-SRP challenge and proof are verified using the attacker's account, while the independently supplied stage-two username is used to install the target account's privileges. By specifying a higher-privilege account such as admin, a low-privilege user can obtain a full administrative session without knowing the target account's password and can use that session to increase the privileges of the attacker's own account. | 16 Oct |
| CVE-2026-108071 | 8.7 high | 0.00% | no CPE yet | Incorrect authentication vulnerability in the TSplus Remote Access multi-factor authentication (MFA) mechanism. A remote attacker authenticated with valid first-factor credentials could bypass the second-factor verification because the authentication flow does not correctly apply the MFA validation result, allowing the attacker to complete the login without a valid second-factor token and gain access to protected applications and resources. | 15 Oct |
| CVE-2026-63154 | 8.7 high | 0.00% | no CPE yet | Omnispace Agora Project before 26.10.0 contains a SQL identifier injection vulnerability that allows a space administrator to escalate privileges by supplying caller-controlled agoraFields[] names as unvalidated SQL column identifiers during the user import flow. Attackers can inject privileged column names such as generalAdmin or use backtick-injection techniques to set administrative flags and escalate to general administrator privileges. | 15 Oct |
| CVE-2026-114662 | 8.6 high | 0.00% | no CPE yet | Obot before 0.26.0 contains an authentication bypass vulnerability in the CLI login flow that allows unauthenticated attackers to steal API keys by choosing token request IDs. Attackers can create a token request via POST /api/token-request, send the login link to a signed-in user, and fetch the resulting non-expiring API key to take over the victim's account. | Wed 28 Oct |
| CVE-2026-73247 | 8.6 high | 0.00% | no CPE yet | Kestra is an open-source, event-driven orchestration platform. Prior to 2.0.0, Kestra's core/src/main/java/io/kestra/core/runners/pebble/functions/HttpFunction.java passes the user-controlled http() uri argument to URI.create() and the server-side HTTP client without restricting private, loopback, or link-local destinations, allowing an unauthenticated attacker to import and execute a flow that accesses internal services or cloud metadata. | Sat 24 Oct |
| CVE-2026-20271 | 8.6 high | 0.00% | cisco, ios_xe | As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20271 are related to insufficient control flow management issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-691. | 23 Oct |
| CVE-2026-19433 | 8.6 high | 0.00% | no CPE yet | Authorization Bypass Through User-Controlled Key in the contact management component in Roskus Prospero Flow CRM before 5.4.8 allows authenticated users of any company to blindly overwrite the contact data of another company and to download that contact's personal data as a vCard via the contact's numeric identifier, because the save and export operations retrieve the record without constraining the query to the authenticated user's company. | 23 Oct |
| CVE-2026-114519 | 8.6 high | 0.00% | no CPE yet | Missing Authorization (CWE-862) in the user API of Roskus Prospero Flow CRM from 2.0.0 before 5.26.0 allows a user with a basic role to read the accounts of other users of its own company, including accounts with higher privileges, and, in versions from 3.5.0, to delete them, because the routes GET /api/user/{id} and DELETE /api/user/{id} in routes/api.php carry only the auth:api middleware, which checks that a JSON Web Token is valid and nothing more, and neither UserReadController::read() nor UserDeleteController::delete() checks a permission, a policy or a role before acting. Object access is scoped by company: the read path limits the query to the company of the authenticated user, and the delete path compares the company of the target account with the company of the authenticated user. The delete path skips that comparison when the company of the authenticated user is Company::DEFAULT_COMPANY, so a user with a basic role in that company can delete any account of any company of the installation. Deleting an account removes the data held on it, and the last administrative account of a company can be deleted. This gives the attacker the personal data held on the other accounts, including email address, telephone number, postal address and IBAN, and the ability to delete accounts it has no permission to administer. | 23 Oct |
| CVE-2026-19539 | 8.6 high | 0.00% | no CPE yet | Authorization Bypass Through User-Controlled Key in the ticket management component in Roskus Prospero Flow CRM before 5.4.9 allows authenticated users of any company to read the full content (title, description, and attachments) of tickets belonging to another company, to hijack another company's tickets by reassigning their company_id, and to delete another company's tickets without any authorization check, via the ticket's numeric identifier, because the read and save operations retrieve the record without constraining the query to the authenticated user's company, and the delete controller type-hints a generic Illuminate\Http\Request instead of the TicketDeleteRequest that would enforce the required permission. | 23 Oct |
| CVE-2026-75833 | 8.6 high | 0.00% | no CPE yet | The Grav API plugin (getgrav/grav-plugin-api, bundled with Grav 2.0's admin-next/API stack) before version 1.0.14 contains an open redirect weakness in SsoController::sanitizeReturnTo(). The function rejects a literal '//' prefix but does not account for browsers normalizing backslashes to slashes in special (http/https) schemes, so a returnTo value such as '/\evil.com' passes the guard and is later resolved by the browser as the protocol-relative URL '//evil.com'. Following a legitimate OAuth login flow, an attacker-supplied returnTo parameter could redirect an authenticated victim to an attacker-controlled site for post-login phishing. Full browser-side exploitability depends on the admin-next SPA's client-side oauth-callback handler and was not independently verified by the reporter. | 22 Oct |
| CVE-2026-43139 | 8.6 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error. | 19 Oct |
| CVE-2026-76633 | 8.6 high | 0.00% | no CPE yet | WeGIA before 3.9.2 contains an authorization bypass vulnerability in the password change flow that allows any authenticated user to change their account password without providing existing credentials by exploiting the unconditional exclusion of the alterarSenha method from permission checks in controle/control.php. Attackers can manipulate the redir parameter to point to alterar_senha.php, routing through verificarSenhaConfig() instead of verificarSenha() to bypass current password verification and convert temporary session access into permanent account takeover. | 18 Oct |
| CVE-2026-111882 | 8.6 high | 0.00% | no CPE yet | phpMyFAQ 3.2.0-alpha before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an authentication bypass vulnerability that allows IdP-authenticated users to skip TOTP two-factor authentication through the Keycloak and Entra ID SSO callbacks. Attackers holding a valid or phished IdP identity linked to a 2FA-enabled account can complete the OIDC flow and obtain a fully authenticated session, including administrator accounts. | 18 Oct |
| CVE-2026-63174 | 8.6 high | 0.00% | no CPE yet | Omnispace Agora Project before 26.10.0 contains a broken access control vulnerability that allows a space administrator to assign users into spaces outside their authority because the spaceAffectList affectation was performed without verifying the caller's rights to the target space. Attackers can exploit the missing readRight() check in the import flow's join INSERT to break tenant isolation and manipulate user-space assignments across unauthorized spaces. | 17 Oct |
| CVE-2025-10470 | 8.6 high | 0.00% | wso2, identity_server | The Magic Link authentication flow accepts multiple invalid authentication requests without adequate rate limiting or resource control, leading to uncontrolled memory usage growth. This vulnerability can result in a denial-of-service condition, causing service unavailability for deployments that utilize the Magic Link authenticator. The impact is limited to these specific deployments and requires repeated invalid authentication attempts to trigger. | 14 Oct |
| CVE-2026-61708 | 8.5 high | — | socfortress, copilot | SOCFortress CoPilot focuses on providing a single pane of glass for all your security operations needs. Prior to 0.1.76, `POST /api/agent_data_store/upload` in `backend/app/data_store/data_store_routes.py` permits `customer_user` callers to choose `bucket_name` and `object_name` without an allowlist, tenant prefix, ownership check or content restriction. The only file check requires a nonempty filename. The operations in `backend/app/data_store/data_store_operations.py` create missing buckets and upsert objects, allowing existing objects belonging to any tenant to be overwritten. Targets include `sysmon-configs/<customer_code>/sysmon_config.xml` distributed to managed Windows endpoints, `copilot-case-report-templates/<name>` rendered server-side, and case evidence or forensic artifacts under `copilot-cases/<case_id>/<file>` and `velociraptor-artifacts/<agent_id>/<flow_id>/<file>`. A lowest-privilege user can tamper with cross-tenant evidence, blind endpoint telemetry, poison report templates for later code execution, plant data or exhaust storage. Sibling list, download and delete routes remain restricted to admin/analyst; the exposed operation is the upload write path. This issue is fixed in version 0.1.76. | 22 h ago |
| CVE-2026-66001 | 8.5 high | 0.00% | no CPE yet | Frappe is a full-stack web application framework. Prior to 15.114.0 and 16.26.0, the approve and authorize functions in frappe/integrations/oauth2.py allow the OAuth2 consent flow to proceed without restricting approve to POST, without a csrf_token in frappe/templates/includes/oauth_confirmation.html, and without scoping an active OAuth token check to the requesting client. An attacker can cause an authenticated user to approve an OAuth grant or reuse authorization state for the wrong client, exposing data and permitting actions within the granted scopes. This issue is fixed in versions 15.114.0 and 16.26.0. | Mon 26 Oct |
| CVE-2026-10129 | 8.5 high | 0.00% | langflow | IBM Langflow OSS 1.0.0 through 1.9.3 contains a Server-Side Request Forgery (SSRF) protection bypass vulnerability in the API Request component. An authenticated attacker with low-level privileges (flow author role) can bypass SSRF protections by enabling the follow_redirects parameter and supplying a public URL that redirects to internal/localhost addresses. The vulnerability exists because the application validates only the initial URL but does not re-validate redirect destinations. This allows attackers to access internal HTTP services, localhost endpoints, cloud metadata services, and private network resources that should be unreachable when SSRF protection is enabled. Successful exploitation can lead to disclosure of sensitive information including credentials, tokens, internal API responses, and administrative panel data. | Sun 25 Oct |
| CVE-2026-39915 | 8.5 high | 0.00% | no CPE yet | TIM Flow before 26.0.6 contains a CRLF injection vulnerability that allows remote attackers to inject arbitrary HTTP headers and response body content by embedding unsanitized carriage return and line feed sequences in the rt URL parameter, which is reflected into Set-Cookie response headers. Attackers can craft malicious requests to induce authenticated users to execute arbitrary JavaScript in their browser context, enabling session token theft and account credential modification. | 12 Oct |
| CVE-2026-45108 | 8.4 high | 0.00% | no CPE yet | Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 2.0.0 to before 3.1.5 and 2.3.11, Himmelblau contained an authentication bypass vulnerability in the Device Authorization Grant (DAG) flow that allowed a user within the same Entra ID domain to obtain a local Unix session as another user by providing their own valid credentials. The vulnerability existed in the token_validate function, which validated domain aliases for legitimate multi-domain scenarios but failed to verify that the local part (username) of the authenticated user's UPN matched the requested account username. The function only compared domains, not the complete usernames. This vulnerability is fixed in 3.1.5 and 2.3.11. | Mon 26 Oct |
| CVE-2026-14881 | 8.4 high | 0.00% | mongodb, compass | When importing connections in Compass it is possible to override some connection options that are otherwise can't be changed via connection form. In particular it is possible to provide a custom browser open command for OIDC auth flow that is usually can be set only globally via Compass settings. | 24 Oct |
| CVE-2026-72342 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path. | 16 Oct |
| CVE-2025-67750 | 8.4 high | 0.00% | no CPE yet | Lightning Flow Scanner provides a A CLI plugin, VS Code Extension and GitHub Action for analysis and optimization of Salesforce Flows. Versions 6.10.5 and below allow a maliciously crafted flow metadata file to cause arbitrary JavaScript execution during scanning. The APIVersion rule uses new Function() to evaluate expression strings, enabling an attacker to supply a malicious expression within rule configuration or crafted flow metadata. This could compromise developer machines, CI runners, or editor environments. This issue is fixed in version 6.10.6. | 14 Oct |
| CVE-2026-59179 | 8.3 high | 0.00% | no CPE yet | OpenHop is a tool for creating interactive data-flow diagrams. Prior to 0.3.7, `@openhop/server` passes unauthenticated flow route parameters from `GET /api/flows/:id` and `DELETE /api/flows/:id` in `packages/server/src/routes.ts` to `FlowStore.filePath()` in `packages/server/src/store.ts` without an identifier allow-list. The router applies `decodeURIComponent` to the id, and `path.join()` then normalizes traversal outside the configured flow directory after appending the .yaml extension. An attacker can read accessible YAML files as YAML-parsed JSON or permanently delete accessible .yaml files outside that directory, exposing configuration or secrets and disrupting dependent services. In `packages/server/src/index.ts`, CORS `origin: true` permits any browser origin, enabling a malicious webpage to target a loopback-bound instance. Docker deployments default to `HOST=0.0.0.0` and permit direct unauthenticated network access. This issue is fixed in repository release 0.3.7. | Wed 28 Oct |
| CVE-2026-41270 | 8.3 high | 0.00% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, a Server-Side Request Forgery (SSRF) protection bypass vulnerability exists in the Custom Function feature. While the application implements SSRF protection via HTTP_DENY_LIST for axios and node-fetch libraries, the built-in Node.js http, https, and net modules are allowed in the NodeVM sandbox without equivalent protection. This allows authenticated users to bypass SSRF controls and access internal network resources (e.g., cloud provider metadata services) This vulnerability is fixed in 3.1.0. | Mon 26 Oct |
| CVE-2026-41271 | 8.3 high | 0.00% | flowiseai, flowise | Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, a Server-Side Request Forgery (SSRF) vulnerability exists in FlowiseAI's POST/GET API Chain components that allows unauthenticated attackers to force the server to make arbitrary HTTP requests to internal and external systems. By injecting malicious prompt templates, attackers can bypass the intended API documentation constraints and redirect requests to sensitive internal services, potentially leading to internal network reconnaissance and data exfiltration. This vulnerability is fixed in 3.1.0. | Mon 26 Oct |
| CVE-2026-47189 | 8.3 high | 0.00% | no CPE yet | Quest Bot is an opensource modern Discord Bot built for moderation, utilities and support. Prior to version 1.0.5, the AutoMod remove flow looks up and deletes rules by global database ID without verifying that the rule belongs to the guild where the command is executed. A user can learn a victim guild’s AutoMod rule ID through autocomplete, then remove that rule from another guild where they have Manage Server. This issue has been patched in version 1.0.5. | Mon 26 Oct |
Download these 653 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.