Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-77057 | 2.3 low | 0.00% | no CPE yet | boneIO Black does not limit authentication attempts on its web interface (POST /api/login) or SSH service, and does not enforce password complexity. An unauthenticated remote attacker can make unlimited brute-force login attempts, potentially compromising user accounts and gaining unauthorized access to the device. This issue was fixed in version 1.6.0: web login attempts are rate-limited per source address and per account, panel passwords must be at least 8 characters long, and SSH allows three authentication attempts per connection with a shortened login grace time. | Mon 26 Oct |
| CVE-2026-18766 | 2.1 low | 0.00% | no CPE yet | A flaw has been found in chetans9 core-php-admin-panel up to 90d07ed5aac5e0f09b6a5828d7bb2eb83010763f. This issue affects some unknown processing of the file /Applications/MAMP/htdocs/core-php-admin-panel-master/customers.php. Executing a manipulation of the argument filter_col can lead to sql injection. The attack may be launched remotely. The exploit has been published and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. | Fri 23 Oct |
| CVE-2025-9665 | 2.1 low | 0.00% | fabian, simple_grading_system | A weakness has been identified in code-projects Simple Grading System 1.0. Affected by this vulnerability is an unknown functionality of the file /edit_student.php of the component Admin Panel. This manipulation of the argument ID causes sql injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. | 18 Oct |
| CVE-2025-9666 | 2.1 low | 0.00% | fabian, simple_grading_system | A security vulnerability has been detected in code-projects Simple Grading System 1.0. Affected by this issue is some unknown functionality of the file /delete_student.php of the component Admin Panel. Such manipulation of the argument ID leads to sql injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | 18 Oct |
| CVE-2025-9667 | 2.1 low | 0.00% | fabian, simple_grading_system | A vulnerability was detected in code-projects Simple Grading System 1.0. This affects an unknown part of the file /delete_account.php of the component Admin Panel. Performing manipulation of the argument ID results in sql injection. The attack may be initiated remotely. The exploit is now public and may be used. | 18 Oct |
| CVE-2026-109307 | 2.1 low | 0.00% | no CPE yet | Craft CMS 5.0.0 before 5.10.14 contains a DOM-based cross-site scripting vulnerability in the control panel login and 2FA verification flow, where a user-controlled returnUrl accepting javascript: URLs is used in client-side navigation. Attackers can lure a 2FA-enabled victim into opening a crafted /admin/login?verify=1 URL between password submission and TOTP verification, executing JavaScript in the authenticated control panel with the victim's permissions. | 15 Oct |
| CVE-2026-110627 | 2.1 low | 0.00% | no CPE yet | ClipBucket v5 through 5.5.3-#206 contains a reflected cross-site scripting vulnerability in admin_area/index.php that allows attackers to inject HTML via the val parameter in mode=add_todo. Attackers can lure a logged-in administrator into submitting a cross-site POST form without CSRF protection, executing script in the admin panel origin. | 14 Oct |
| CVE-2025-11056 | 2.1 low | 0.00% | oranbyte, school_management_system | A flaw has been found in ProjectsAndPrograms School Management System 1.0. Affected by this vulnerability is an unknown functionality of the file owner_panel/fetch-data/select-students.php. This manipulation of the argument select causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. | 9 Oct |
| CVE-2026-82865 | 2.1 low | 0.00% | no CPE yet | pdfme schemas before 5.5.10 contains a cross-site scripting vulnerability in the multiVariableText property panel that assigns unsanitized i18n label values to innerHTML. Attackers who control label overrides through options.labels can inject arbitrary JavaScript that executes when users open the Designer and select a multiVariableText field without variable placeholders. | 8 Oct |
| CVE-2026-5332 | 2.0 low | 0.00% | xiaopi, panel | A vulnerability was identified in Xiaopi Panel 1.0.0. This vulnerability affects unknown code of the file /demo.php of the component WAF Firewall. The manipulation of the argument param leads to cross site scripting. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-108828 | 1.2 low | 0.00% | no CPE yet | A vulnerability was identified in Zen Cart 2.2.2. Affected by this vulnerability is the function eval of the file admin/configuration.php of the component Admin Panel. The manipulation of the argument gID leads to sql injection. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitation appears to be difficult. The exploit is publicly available and might be used. The vendor explains: "`set_function`/`use_function` are not editable through any normal admin UI (only at plugin-install time via SQL, or via direct database access)". | 13 Oct |
| CVE-2026-68247 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: range check LFP Data Block panel_type2 While the panel_type from LFP Data Block is range checked, panel_type2 is not. Add a few helpers for range checking, and use them to not only check panel_type2, but also improve clarity and correctness in the panel type selection. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: - Fix commit message typo (Michał) - Add is_panel_type_pnp() (Ville) (cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) | 8 h ago |
| CVE-2026-46312 | unscored | — | linux | In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: Set vma_flags in vb2_dma_sg_mmap vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops. gst-launch-1.0 v4l2src ! gtk4paintablesink [ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2 snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3 snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon apple_sart apple_dockchannel macsmc apple_rtkit_helper spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core spi_apple [ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram [ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full) [ 38.219040] Tainted: [W]=WARN [ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210 [ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210 [ 38.222178] sp : ffffc0008dc678e0 [ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480 [ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968 [ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0 [ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968 [ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8 [ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff [ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8 [ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000 [ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038 [ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb [ 38.231488] Call trace: [ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P) [ 38.232342] drm_gem_mmap+0x140/0x260 [ 38.232813] __mmap_region+0x488/0x9a0 [ 38.233277] mmap_region+0xd0/0x148 [ 38.233703] do_mmap+0x350/0x5c0 [ 38.234148] vm_mmap_pgoff+0x14c/0x200 [ 38.234612] ksys_mmap_pgoff+0x150/0x208 [ 38.235107] __arm64_sys_mmap+0x34/0x50 [ 38.235611] invoke_syscall+0x50/0x120 [ 38.236075] el0_svc_common.constprop.0+0x48/0xf0 [ 38.236680] do_el0_svc+0x24/0x38 [ 38.237113] el0_svc+0x38/0x168 [ 38.237507] el0t_64_sync_handler+0xa0/0xe8 [ 38.238034] el0t_64_sync+0x198/0x1a0 [ 38.238491] ---[ end trace 0000000000000000 ]--- There were discussions in [1] at the end of 2023 that mmap() on imported ---truncated--- | 8 h ago |
| CVE-2024-26662 | unscored | — | linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()' 'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) | 8 h ago |
| CVE-2026-90363 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/ | 21 Oct |
| CVE-2026-74653 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. | 21 Oct |
| CVE-2025-40152 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix bootup splat with separate_gpu_drm modparam The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses drm_gem_obj.gpuva.list, which is not initialized when the drm driver does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam is set: [ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0 [ 9.523160] Mem abort info: [ 9.523161] ESR = 0x0000000096000006 [ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits [ 9.523165] SET = 0, FnV = 0 [ 9.523166] EA = 0, S1PTW = 0 [ 9.523167] FSC = 0x06: level 2 translation fault [ 9.523169] Data abort info: [ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000 [ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000 [ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP [ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT [ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024 [ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 9.592973] pc : lookup_vma+0x28/0xe0 [msm] [ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm] [ 9.763632] sp : ffff800082dab460 [ 9.763666] Call trace: [ 9.763668] lookup_vma+0x28/0xe0 [msm] (P) [ 9.763688] get_vma_locked+0x2c/0x128 [msm] [ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm] [ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm] [ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm] [ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper] [ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper] [ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib] [ 9.763782] drm_client_register+0x58/0x9c [drm] [ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib] [ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib] [ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm] [ 9.763830] msm_drm_init+0x1a8/0x22c [msm] [ 9.763848] msm_drm_bind+0x30/0x3c [msm] [ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4 [ 9.919283] __component_add+0xa4/0x170 [ 9.919286] component_add+0x14/0x20 [ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm] [ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm] [ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus] [ 9.919341] really_probe+0xbc/0x298 [ 9.919345] __driver_probe_device+0x78/0x12c [ 9.919348] driver_probe_device+0x40/0x160 [ 9.919350] __driver_attach+0x94/0x19c [ 9.919353] bus_for_each_dev+0x74/0xd4 [ 9.919355] driver_attach+0x24/0x30 [ 9.919358] bus_add_driver+0xe4/0x208 [ 9.919360] driver_register+0x60/0x128 [ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus] [ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20] [ 9.919370] do_one_initcall+0x6c/0x1b0 [ 9.919374] do_init_module+0x58/0x234 [ 9.919377] load_module+0x19cc/0x1bd4 [ 9.919380] init_module_from_file+0x84/0xc4 [ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc [ 9.919384] invoke_syscall+0x48/0x110 [ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8 [ 9.919393] do_el0_svc+0x20/0x2c [ 9.919396] el0_svc+0x34/0xf0 [ 9.919401] el0t_64_sync_handler+0xa0/0xe4 [ 9.919403] el0t_64_sync+0x198/0x19c [ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44) [ 9.919410] ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/pa ---truncated--- | 19 Oct |
| CVE-2026-98313 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)" echo 1 > /sys/class/graphics/fb0/blank [535.645455] === marker === [535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \ sys_m_smsm.c:512:TZ force stop [535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error [535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \ sys_m_smsm.c:783:err fatal notification received from TZ <SoC reset> Gate the PUSH_IDLE write on ->power_on so the disable path is consistent with the rest of the teardown. With this applied the same sequence is harmless and the machine stays up; without it, it resets every time. The unconditional write dates back to the original DP driver (c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the surrounding code has been restructured several times since, so no Fixes: tag is offered. Note that the eDP link-training failure that exposes this on the A16 is a separate problem in the glymur eDP PHY and is reported separately; this change is about not damaging the machine when training fails, for whatever reason. Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on linux-next next-20260803 and next-20260807. The machine has since been running next-20260807 with this patch as its daily driver. Patchwork: https://patchwork.freedesktop.org/patch/745167/ | 19 Oct |
| CVE-2026-93113 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK With the introduction of sync_state support in the clk and pmdomain subsystems, the following warning happens when the unused clocks are shutdown in camcc-sc8280xp: [ 15.408367] titan_top_gdsc status stuck at 'on' [ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14 [ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common snd_soc_sc8280xp soundwire_qcom snd_soc_wcd_mbhc snd_soc_qcom_sdw slimbus snd_soc_qcom_common regmap_sdw btqca btrtl qcom_camss soundwire_bus btbcm btintel snd_soc_sdca snd_soc_lpass_wsa_macro bluetooth snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_rx_macro snd_soc_hdmi_codec snd_soc_lpass_macro_common videobuf2_dma_sg ov5675 v4l2_fwnode videobuf2_memops qcom_spmi_adc5 snd_soc_core qcom_spmi_adc_tm5 videobuf2_v4l2 snd_seq snd_seq_device videobuf2_common v4l2_async qcom_vadc_common qcom_spmi_temp_alarm pm8941_pwrkey industrialio videodev snd_compress rfkill ac97_bus snd_pcm_dmaengine qcom_tsens mc qcom_edac snd_pcm pci_pwrctrl_pwrseq qcom_cpufreq_hw snd_timer snd qcomtee soundcore tee leds_gpio joydev binfmt_misc zram lz4hc_compress governor_simpleondemand panel_edp msm xhci_plat_hcd nvme nvme_core dwc3 qcom_pm8008_regulator [ 15.408688] ucsi_glink nvme_keyring nvme_auth pmic_glink_altmode udc_core typec_ucsi aux_hpd_bridge qcom_battmgr ulpi ubwc_config socinfo ocmem drm_gpuvm qcom_q6v5_pas drm_exec qcom_pil_info leds_qcom_lpg gpu_sched led_class_multicolor rtc_pm8xxx qcom_pbs qcom_common drm_display_helper qcom_pon qcom_glink_smem qcom_glink ghash_ce pwrseq_qcom_wcn gpio_sbu_mux qcom_stats phy_qcom_qmp_combo qcom_q6v5 gf128mul cec dispcc_sc8280xp phy_qcom_edp camcc_sc8280xp i2c_qcom_cci qcom_sysmon drm_dp_aux_bus mdt_loader aux_bridge qcom_pm8008 i2c_hid_of_elan dwc3_qcom_legacy llcc_qcom icc_bwmon gpi typec qcom_refgen_regulator phy_qcom_qmp_usb nvmem_qfprom qcom_ipcc phy_qcom_snps_femto_v2 gpucc_sc8280xp pinctrl_sc8280xp_lpass_lpi qcom_hwspinlock pinctrl_lpass_lpi lpasscc_sc8280xp qrtr qcom_aoss pmic_glink pdr_interface phy_qcom_qmp_pcie qcom_smd qcom_pdr_msg icc_osm_l3 qcom_wdt qmi_helpers qcom_rng smp2p rpmsg_core gpio_keys pwm_bl smem hid_multitouch fuse i2c_dev [ 15.408928] CPU: 2 UID: 0 PID: 14 Comm: kworker/u32:1 Not tainted 7.1.0+ #2 PREEMPT(lazy) [ 15.408937] Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET88W (1.60 ) 03/14/2024 [ 15.408942] Workqueue: pm pm_runtime_work [ 15.408959] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 15.408967] pc : gdsc_toggle_logic+0x14c/0x160 [ 15.408978] lr : gdsc_toggle_logic+0x14c/0x160 [ 15.408987] sp : ffff8000800f3b40 [ 15.408991] x29: ffff8000800f3b40 x28: 0000000000000000 x27: 0000000000000000 [ 15.409003] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 15.409014] x23: 0000000000000000 x22: 0000000000000001 x21: ffffa33f298fca88 [ 15.409024] x20: 0000000000000000 x19: ffffa33f298fc5b0 x18: 00cd15db75dacefd [ 15.409035] x17: 000000040044ffff x16: ffffa33f3b1a3d88 x15: 726f776b80000002 [ 15.409045] x14: ffffffffffffffff x13: 0000000000000028 x12: 0101010101010101 [ 15.409056] x11: 7f7f7f7f7f7f7f7f x10: fefeff3039313274 x9 : ffffa33f3a5edafc [ 15.409067] x8 : ffff8000800f3780 x7 : 0000000000000001 x6 : 0000000000000001 [ 15.409078] x5 : ffff000bf3ca1288 x4 : 0000000000000000 x3 : ffff5cccb6a3f000 [ 15.409088] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000080ae0000 [ 15.409098] Call trace: [ 15.409103] gdsc_toggle_logic+0x14c/0x160 (P) [ 15.409115] gdsc_disable+0x4c/0x190 [ 15.409126] _genp ---truncated--- | 19 Oct |
| CVE-2026-89824 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter reference on probe failure (e.g. probe deferral) and on driver unbind also if a devicetree redundantly uses the 'ddc-i2c-bus' property to point to the aux ddc bus. | 19 Oct |
220 of 220 · Previous
Download these 220 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.