Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-118275 | 5.5 medium | 0.00% | no CPE yet | A vulnerability was found in a2ui-project a2ui up to 0.10.6. This affects the function DataContext.resolveSignal of the file renderers/web_core/src/v0_9/rendering/data-context.ts of the component Resolver. The manipulation results in resource consumption. The attack can be launched remotely. The exploit has been made public and could be used. The patch is identified as c76e17272e52c12c6dcf68905b1df978c39e9aa5. It is advisable to implement a patch to correct this issue. | Wed 28 Oct |
| CVE-2024-29720 | 5.5 medium | 0.00% | terrainformatica, sciter | An issue in Terra Informatica Software, Inc Sciter v.4.4.7.0 allows a local attacker to obtain sensitive information via the adopt component of the Sciter video rendering function. | Tue 27 Oct |
| CVE-2026-98094 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short. | Fri 23 Oct |
| CVE-2026-107889 | 5.5 medium | 0.00% | no CPE yet | A flaw was found in the login theme rendering component of Keycloak. The issue occurs because the security filter responsible for cleaning user input can be bypassed, allowing a realm administrator to store malicious scripts in display fields. This could result in unauthorized JavaScript execution in the browsers of users visiting the login page, potentially leading to data exposure or session interference. | 13 Oct |
| CVE-2026-104035 | 5.5 medium | 0.00% | no CPE yet | A flaw was found in SSSD. An issue in the Kerberos Credential Manager (KCM) responder allows a local user to cause a Denial of Service (DoS) by maintaining a persistent connection and repeatedly storing and destroying credentials. Because the service fails to release cached objects from memory when credentials are removed, memory consumption grows continuously, ultimately exhausting available memory and rendering the service unresponsive. | 8 Oct |
| CVE-2025-63528 | 5.4 medium | 0.00% | shridharshukl, blood_bank_management_system | A cross-site scripting (XSS) vulnerability exists in the Blood Bank Management System 1.0 within the blooddinfo.php component. The application fails to properly sanitize or encode user-supplied input before rendering it in response. An attacker can inject malicious JavaScript payloads into the error parameter, which is then executed in the victim's browser when the page is viewed. | Mon 26 Oct |
| CVE-2026-35565 | 5.4 medium | 0.00% | apache, storm | Stored Cross-Site Scripting (XSS) via Unsanitized Topology Metadata in Apache Storm UI Versions Affected: before 2.8.6 Description: The Storm UI visualization component interpolates topology metadata including component IDs, stream names, and grouping values directly into HTML via innerHTML in parseNode() and parseEdge() without sanitization at any layer. An authenticated user with topology submission rights could craft a topology containing malicious HTML/JavaScript in component identifiers (e.g., a bolt ID containing an onerror event handler). This payload flows through Nimbus → Thrift → the Visualization API → vis.js tooltip rendering, resulting in stored cross-site scripting. In multi-tenant deployments where topology submission is available to less-trusted users but the UI is accessed by operators or administrators, this enables privilege escalation through script execution in an admin's browser session. Mitigation: 2.x users should upgrade to 2.8.6. Users who cannot upgrade immediately should monkey-patch the parseNode() and parseEdge() functions in the visualization JavaScript file to HTML-escape all API-supplied values including nodeId, :capacity, :latency, :component, :stream, and :grouping before interpolation into tooltip HTML strings, and should additionally restrict topology submission to trusted users via Nimbus ACLs as a defense-in-depth measure. A guide on how to do this is available in the release notes of 2.8.6. Credit: This issue was discovered while investigating another report by K. | Mon 26 Oct |
| CVE-2026-5077 | 5.4 medium | 0.00% | no CPE yet | The Total theme for WordPress is vulnerable to Stored Cross-Site Scripting via post titles in versions up to, and including, 2.2.1 due to insufficient output escaping when rendering the_title() inside HTML attribute context in the home blog section template. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the malicious post to be published and displayed with a featured image in the Home Page blog section. | Mon 26 Oct |
| CVE-2026-53946 | 5.4 medium | 0.00% | no CPE yet | Ghost is a Node.js content management system. From 6.19.4 until 6.21.1, when re-rendering posts, Ghost would refetch missing image dimensions by issuing an outbound HTTP request to the URL stored on an image card — without restricting that URL to trusted image hosts. An authenticated staff user able to create or edit posts could therefore point an image card at an attacker-chosen host and cause the Ghost server to request it on their behalf, including hosts on internal networks or cloud instance metadata endpoints that would not normally be reachable from the public internet. This vulnerability is fixed in 6.21.1. | Sun 25 Oct |
| CVE-2026-35046 | 5.4 medium | 0.00% | tandoor, recipes | Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.4, Tandoor Recipes allows authenticated users to inject arbitrary <style> tags into recipe step instructions. The bleach.clean() sanitizer explicitly whitelists the <style> tag, causing the backend to persist and serve unsanitized CSS payloads via the API. Any client consuming instructions_markdown from the API and rendering it as HTML without additional sanitization will execute attacker-controlled CSS — enabling UI redressing, phishing overlays, visual defacement, and CSS-based data exfiltration. This vulnerability is fixed in 2.6.4. | Sat 24 Oct |
| CVE-2025-14945 | 5.4 medium | 0.00% | no CPE yet | The Events Manager - Calendar, Bookings, Tickets, and more! plugin for WordPress is vulnerable to Stored Cross-Site Scripting via event attribute values in all versions up to, and including, 7.3.3. This is due to insufficient input sanitization when storing attribute values (using only `wp_unslash()` without sanitization) and lack of output escaping when rendering the '#_ATT{key}' placeholder. This makes it possible for authenticated attackers, with Author-level access and above, or unauthenticated attackers when anonymous event submissions are enabled, to inject arbitrary web scripts that execute when any user views the affected event page. | 19 Oct |
| CVE-2025-58054 | 5.4 medium | 0.00% | discourse | Discourse is an open-source community discussion platform. Versions 3.5.0 and below are vulnerable to XSS attacks through parsing and rendering of chat channel titles and chat thread titles via the quote message functionality when using the rich text editor. This issue is fixed in version 3.5.1. | 19 Oct |
| CVE-2025-67496 | 5.4 medium | 0.00% | wegia | WeGIA is an open source Web Manager for Institutions with a focus on Portuguese language users. Versions 3.5.4 and below contain a Stored Cross-Site Scripting (XSS) vulnerability in the /WeGIA/html/geral/configurar_senhas.php endpoint. The application does not sanitize user-controlled data before rendering it inside the employee selection dropdown. The application retrieves employee names from the database and injects them directly into HTML <option> elements without proper escaping. This issue is fixed in version 3.5.5. | 14 Oct |
| CVE-2026-107380 | 5.4 medium | 0.00% | no CPE yet | savg-sanitizer is a PHP SVG/XML sanitizer. Prior to 1.0.0, svg-sanitizer's isHrefSafeValue() validates an SVG href after XML DTD entity expansion, but saveXML() serializes the original entity reference after removing the DTD declaration. A crafted entity such as Tab can appear to the sanitizer as a safe fragment prefix while HTML5 Named Character Reference resolution during inline HTML rendering later converts the surviving reference to whitespace, exposing a javascript: URL. When an application embeds the sanitized SVG inline, a user who activates the link can cause script to execute in the embedding page's origin. This issue is fixed in version 1.0.0. | 9 Oct |
| CVE-2025-62798 | 5.4 medium | 0.00% | no CPE yet | Sharp is a content management framework built for Laravel as a package. Prior to 9.11.1, a Cross-Site Scripting (XSS) vulnerability was discovered in code16/sharp when rendering content using the SharpShowTextField component. In affected versions, expressions wrapped in {{ & }} were evaluated by Vue. This allowed attackers to inject arbitrary JavaScript or HTML that executes in the browser when the field is displayed. The issue has been fixed in v9.11.1 . | 8 Oct |
| CVE-2026-34364 | 5.3 medium | 0.00% | wwbn, avideo | WWBN AVideo is an open source video platform. In versions up to and including 26.0, the `categories.json.php` endpoint, which serves the category listing API, fails to enforce user group-based access controls on categories. In the default request path (no `?user=` parameter), user group filtering is entirely skipped, exposing all non-private categories including those restricted to specific user groups. When the `?user=` parameter is supplied, a type confusion bug causes the filter to use the admin user's (user_id=1) group memberships instead of the current user's, rendering the filter ineffective. Commit 6e8a673eed07be5628d0b60fbfabd171f3ce74c9 contains a fix. | Mon 26 Oct |
| CVE-2026-113490 | 5.3 medium | 0.00% | no CPE yet | The GeoDirectory WordPress plugin before 2.8.194 does not perform any status or ownership check when rendering a listing's map-popup through one of its single-item REST routes, allowing unauthenticated users to read the title, permalink and card fields of non-public (draft, pending, private and trashed) listings by supplying the listing ID. | Mon 26 Oct |
| CVE-2026-111976 | 5.3 medium | 0.00% | no CPE yet | The GiveWP WordPress plugin before 4.19.0.1 does not perform any status or capability check when rendering a donation form on a public front-end route, allowing unauthenticated visitors to view the content and settings of unpublished (draft, pending, private and scheduled) donation forms that WordPress core otherwise keeps non-public. | Mon 26 Oct |
| CVE-2026-56347 | 5.3 medium | 0.00% | no CPE yet | AVideo TopMenu plugin through version 26.0 contains a stored cross-site scripting vulnerability in menu item rendering due to missing output encoding of icon classes, URLs, and text labels. Attackers can inject malicious JavaScript through unescaped menu item fields that execute for all site visitors, potentially stealing session cookies or performing unauthorized actions. | Sun 25 Oct |
| CVE-2026-56761 | 5.3 medium | 0.00% | hono | hono before 4.12.14 contains an html injection vulnerability in jsx server-side rendering that allows attackers to inject unintended html by using malformed attribute names. Attackers can craft specially crafted attribute keys containing characters like quotes or angle brackets to break html tag boundaries and inject arbitrary attributes or elements. | Sun 25 Oct |
| CVE-2026-69116 | 5.3 medium | 0.00% | no CPE yet | FlyEnv before 4.18.0 fails to sanitize HTML from markdown rendering and AI chat content passed to Vue v-html directives. Attackers can inject malicious scripts through markdown sources or chat messages that execute in the Electron renderer process with access to Node.js APIs and the filesystem. | Sat 24 Oct |
| CVE-2026-59231 | 5.3 medium | 0.00% | no CPE yet | Server-Side Request Forgery in the PDF export component in maalfer Pentestify before 1.1.0 allows authenticated users to cause outbound HTTP GET requests from the server to arbitrary attacker-chosen destinations via unvalidated URLs stored in the finding images field or the report client_logo field, which the server-side headless browser fetches while rendering the report. | Fri 23 Oct |
| CVE-2026-113643 | 5.3 medium | 0.00% | no CPE yet | A vulnerability was found in EspoCRM up to 9.3.10/10.0.10. This affects the function ImageSourceProvider::get of the file application/Espo/Tools/Pdf/Dompdf/ImageSourceProvider.php of the component PDF Rendering Pipeline. Performing a manipulation of the argument ID results in authorization bypass. The attack may be initiated remotely. The patch is named 91a9edbcedb9c7aa8e3d3ac81d8a7acccb99bca2. It is suggested to install a patch to address this issue. | 20 Oct |
| CVE-2026-94229 | 5.3 medium | 0.00% | no CPE yet | The TrueBooker WordPress plugin before 1.3.0 does not verify that the requester owns a booking before rendering its confirmation summary, allowing unauthenticated attackers to enumerate booking identifiers and retrieve the personal information of customers who booked an appointment, as well as invalidate the customer's own confirmation link. | 19 Oct |
| CVE-2026-92427 | 5.3 medium | 0.00% | no CPE yet | The Coinsnap Bitcoin Crowdfunding WordPress plugin through 1.2.0 does not restrict access to the secret used to authenticate its payment gateway webhook, disclosing it to unauthenticated users and rendering the webhook's signature check ineffective. This allows unauthenticated attackers to forge payment-confirmation notifications and record arbitrary donations as completed, with attacker-chosen amounts, donor names and messages. | 16 Oct |
| CVE-2026-110593 | 5.3 medium | 0.00% | no CPE yet | BottleCRM through 1.14.5 contains a server-side template injection vulnerability in the send_email Celery task, which compiles the user-supplied AccountEmail message_body with django.template.Template(). Authenticated organization members can submit template tags through POST /api/accounts/<id>/create_mail/ to disclose the rendering context and loaded Python modules, or block the shared Celery worker with nested loops. | 16 Oct |
| CVE-2026-63351 | 5.3 medium | 0.00% | no CPE yet | Affected devices do not properly validate and sanitize visual properties of calculated signals contained in imported CSV trace files before rendering them on the Trace page. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Successful exploitation could allow attacker-controlled JavaScript to execute in the user’s browser session and perform PLC operations through the web server within the scope of the user’s authorization. | 15 Oct |
| CVE-2026-63352 | 5.3 medium | 0.00% | no CPE yet | Affected devices do not properly sanitize calculated signal data contained in imported CSV trace files before rendering it on the Trace page. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Successful exploitation could allow attacker-controlled JavaScript to execute in the user’s browser session and perform PLC operations through the web server within the scope of the user’s authorization. | 15 Oct |
| CVE-2026-63355 | 5.3 medium | 0.00% | no CPE yet | Affected devices do not properly sanitize signal names contained in imported CSV trace files before rendering them in selection menus on the Trace page. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted trace file. Attacker-controlled JavaScript could be executed in the user’s browser session when the user subsequently interacts with an affected selection menu. | 15 Oct |
| CVE-2026-63357 | 5.3 medium | 0.00% | no CPE yet | Affected devices do not properly sanitize calculated signal data contained in imported calculated signal files before rendering it on the Trace page. This could allow an attacker to social engineer an authorized user who holds the function right “Read diagnostics” into importing a specially crafted file. Successful exploitation could allow attacker-controlled JavaScript to execute in the user’s browser session and perform PLC operations through the web server within the scope of the user’s authorization. | 15 Oct |
| CVE-2026-97471 | 5.3 medium | 0.00% | no CPE yet | The Avada (Fusion) Builder plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.16.1 via the 'args[link_target]' parameter. This makes it possible for unauthenticated attackers to extract arbitrary user meta values for any user ID, including administrator email addresses, login names, wp_user_level, and WooCommerce customer PII such as billing_email, billing_phone, and billing_address_1. The awb-instagram-nonce required to trigger this endpoint is printed in plaintext in fusionInstagramVars on any page rendering the [fusion_instagram] shortcode, making it harvestable by any anonymous visitor before the exploit request is sent. | 15 Oct |
| CVE-2026-85453 | 5.3 medium | 0.00% | themoos, core-moos | MOOS core-moos through 10.4.0 fails to escape database contents when rendering MOOSDB HTTP pages, allowing attackers to inject malicious scripts. Any MOOS publisher can set variable values containing script payloads that execute in the browser of operators viewing the web interface. | 14 Oct |
| CVE-2026-105198 | 5.3 medium | 0.00% | no CPE yet | The Appointment Booking Plugin WordPress plugin before 5.7.3 does not verify that the caller owns the order referenced by an order-item identifier before rendering that order's confirmation summary, letting an unauthenticated visitor retrieve any customer's name, contact details and order confirmation code by supplying a sequential order-item id. | 8 Oct |
| CVE-2026-58394 | 5.2 medium | 0.00% | no CPE yet | OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, src/www/system_advanced_admin.php reads certificate records into $a_cert but omits that array from legacy_html_escape_form_data() before rendering each certificate descr value in the SSL Certificate selector. The certificate description accepts HTML metacharacters, allowing a user with the page-system-certmanager privilege to store markup that executes when another user opens System Settings Administration. This issue is fixed in version 26.1.11. | 15 Oct |
| CVE-2026-3317 | 5.1 medium | 0.00% | no CPE yet | Reflected Cross-Site Scripting (XSS) vulnerability in Navigate Content Management System. The vulnerability is present in the '/blog' endpoint because user input is not properly sanitized through designed query parameters. This results in unsafe HTML rendering, which could allow a remote attacker to execute JavaScript code in the victim's browser. | Mon 26 Oct |
| CVE-2026-57958 | 5.1 medium | 0.00% | no CPE yet | Mixpost through 2.6.0 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to execute arbitrary JavaScript in authenticated users' browsers by crafting malicious OAuth callback URLs with unsanitized error query parameters. Attackers can exploit the OAuth callback controller's failure to sanitize error parameters before rendering them through Laravel flash messages via the Vue v-html directive to hijack authenticated user sessions or perform unauthorized actions. | Sun 25 Oct |
| CVE-2026-63105 | 5.1 medium | 0.00% | no CPE yet | ReadyEcommerce before 4.5.2 contains a stored cross-site scripting (XSS) vulnerability that allows authenticated customers to inject malicious HTML payloads through the chat and support ticket messaging systems by exploiting unsanitized rendering via the v-html directive in Messages.vue, RightChatSidebar.vue, SupportTicketMessages.vue, and SupportTicketDetails.vue. Attackers can submit crafted message content that executes arbitrary JavaScript in the browser of any shop owner or administrator who views the message, enabling session cookie theft and account takeover. | Sat 24 Oct |
| CVE-2026-73161 | 5.1 medium | 0.00% | no CPE yet | Affected versions of cti-transmute improperly handle conversion-table values passed through the search highlighting feature. The highlight() function previously returned the underlying text directly when no search query was supplied, or performed a regex replacement that inserted <mark> tags without first escaping the original content. Because the resulting value is used by an HTML-rendering sink, malicious markup contained in conversion data could be interpreted as HTML rather than displayed as text. The fix introduces a shared highlightMatches() helper that first converts special characters such as <, >, &, and quotes into HTML entities. Only after escaping does the code insert the application-controlled <mark> element used for search highlighting. | Sat 24 Oct |
| CVE-2026-72751 | 5.1 medium | 0.00% | no CPE yet | CTI-Transmute is affected by a stored cross-site scripting (XSS) vulnerability in the conversion graph used to visualise converted MISP and STIX content. Attacker-controlled values originating from converted CTI data were passed to multiple HTML-parsing sinks in the graph user interface without sufficient neutralisation. In particular, node labels, node sublabels, edge labels, node properties, edge properties, and node types could contain crafted HTML or JavaScript content. The Pivotick graph library renders some of these values through HTML-parsing operations. Consequently, a malicious value such as an HTML element containing an event handler could be interpreted as markup rather than displayed as plain text. The first remediation explicitly notes that Pivotick rendered node and edge labels as HTML and therefore introduced escaping before data was handed to the graph renderer. A separate vulnerable sink was present in the Open raw JSON functionality. The raw object associated with a graph node was inserted into a new document using document.write() and an interpolated HTML string. Crafted JSON content could therefore break out of the intended <pre> element and inject executable markup. The fix replaced this construction with DOM APIs and assigns the JSON using textContent. The initial correction did not cover all Pivotick rendering paths. A subsequent patch addressed additional XSS vectors in the graph properties panel. Values derived from the original CTI object—including property names, property values, hash algorithm names, child attributes, edge properties, and STIX object types—could still reach Pivotick's HTML resolver. According to the patch, Pivotick's tryResolveHTMLElement processes string values using template.innerHTML, allowing malicious markup to execute when a graph node is hovered over or selected. The complete remediation therefore: * HTML-escapes node labels, node sublabels, and edge labels before they are passed to Pivotick. * Restricts graph node type values to a safe identifier character set. * Wraps node and edge property values in DOM elements populated through textContent, preventing Pivotick from treating attacker-controlled strings as HTML. * Replaces the raw-JSON popup's interpolated document.write() with DOM construction and textContent. | Sat 24 Oct |
| CVE-2026-34951 | 5.1 medium | 0.00% | salesforce, workbench | Workbench is a suite of tools for administrators and developers to interact with Salesforce.com organizations via the Force.com APIs. Prior to 65.0.0, Workbench contains a reflected cross-site scripting vulnerability via the footerScripts parameter, which does not sanitize user-supplied input before rendering it in the page response. Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Workbench allows XSS Targeting Error Pages. This vulnerability is fixed in 65.0.0. | Sat 24 Oct |
| CVE-2026-59729 | 5.1 medium | 0.00% | no CPE yet | Astro is a web framework for content-driven websites. Versions prior to 7.0.6 are vulnerable to XSS through unescaped spread attribute names in renderHTMLElement. The fix for CVE-2026-54298 (GHSA-jrpj-wcv7-9fh9) added an INVALID_ATTR_NAME_CHAR guard to addAttribute() so that spread-prop attribute names containing "' >/= or whitespace are dropped. A second attribute-rendering path, renderHTMLElement() in packages/astro/src/runtime/server/render/dom.ts, has its own inline attribute loop that does not go through addAttribute() and was not updated. It interpolates the attribute name unescaped and only escapes the value, so untrusted prop keys spread onto a native-HTMLElement-subclass component can still break out of the attribute context. This issue has been fixed in version 7.0.6. | Sat 24 Oct |
| CVE-2026-67196 | 5.1 medium | 0.00% | no CPE yet | Perspective 5.0.0 contains a cross-site scripting vulnerability in the built-in Debug plugin that allows attackers to inject arbitrary HTML and JavaScript by writing table cell values containing unescaped HTML markup, which are interpolated directly into innerHTML during CSV serialization rendering. Attackers can craft table rows with payloads such as unquoted attribute injections containing event handler attributes that bypass RFC 4180 quoting, since angle brackets and event handler attributes are never escaped before assignment, causing malicious scripts to execute in the embedding page's origin. | Fri 23 Oct |
| CVE-2026-66296 | 5.1 medium | 0.00% | lud, oaskit | Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in lud oaskit allows reflected cross-site scripting via the default HTML error handler. Oaskit.ErrorHandler.Default.format_reason/4 and Oaskit.ErrorHandler.Default.reason_to_html/1 in lib/oaskit/error_handler/default.ex render request-validation failures as an HTML page whenever the request's Accept header contains html, interpolating request-controlled strings into that page without HTML escaping. The unescaped values are object keys taken from a request body or from an object or deepObject query parameter, which appear in the JSON Schema error's instance path when a schema rejects them (for example under additionalProperties: false), and the raw Content-Type header, reflected in unsupported-media-type errors when it fails to parse. Because browsers send Accept: text/html on ordinary top-level navigation, a crafted GET link is sufficient to trigger the error page; no form submission, custom Content-Type, or attacker-controlled script on the victim's side is required. A payload such as filter[</code></h2><script>alert(document.domain)</script>]=x terminates the enclosing markup and the injected script executes in the origin of the application using oaskit, giving it access to that origin's cookies, session, and same-origin responses. Both HTML error rendering and the vulnerable handler are enabled by default: Oaskit.Plugs.ValidateRequest defaults :html_errors to true and :error_handler to Oaskit.ErrorHandler.Default, so applications following the documented usage are affected without any opt-in. This issue affects oaskit: from 0.1.0 before 0.14.1. | Fri 23 Oct |
| CVE-2026-19434 | 5.1 medium | 0.00% | no CPE yet | Cross-site Scripting in the finding renderer in maalfer Pentestify before 2.3.1 allows authenticated users to execute arbitrary JavaScript in the application origin via HTML markup stored in a finding's severity field, which the frontend interpolates unescaped into class and style attributes when rendering the report. | Fri 23 Oct |
| CVE-2026-75831 | 5.1 medium | 0.00% | no CPE yet | Grav before 2.0.15 contains a stored cross-site scripting vulnerability in the audio and video media rendering through the sourceParsedownElement method. The media URL fragment is concatenated unescaped into rawHtml source elements, allowing attackers to inject arbitrary HTML and JavaScript that executes in viewers' sessions. | 22 Oct |
| CVE-2026-108942 | 5.1 medium | 0.00% | no CPE yet | A security flaw has been discovered in philz1337x clarity-upscaler up to cfbdb842c6c839c8e97741722b8cf9a4b7662d98. This impacts the function create_html_for_item of the file modules/ui_extra_networks.py of the component Extra Networks Card Rendering. The manipulation of the argument Description results in cross site scripting. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. All versions in the repository are affected, as the codebase is based on AUTOMATIC1111/stable-diffusion-webui v1.7.0 code. Upstream AUTOMATIC1111/stable-diffusion-webui (v1.8.0, released March 1, 2024) contains the fix. The project was informed of the problem early through an issue report but has not responded yet. | 13 Oct |
| CVE-2026-107565 | 5.1 medium | 0.00% | no CPE yet | A flaw was found in luksmeta. A local attacker with administrative privileges can cause data corruption when saving metadata to a Linux Unified Key Setup (LUKS) device. Due to incorrect boundary calculations and flawed overlap detection, new metadata entries can be written beyond available free space or over existing records. This issue can corrupt stored encrypted payload data or existing metadata, potentially rendering the affected data inaccessible. | 8 Oct |
| CVE-2026-61453 | 5.1 medium | 0.00% | no CPE yet | Grav v2.0.0 contains a cross-site scripting vulnerability (fixed in 2.0.1). The XSS blueprint validator (Security::detectXss()) runs on raw page content before Twig processing. When Twig content processing is enabled (twig_content.process_enabled: true), an attacker with page-write API permission can use Twig's string concatenation operator (~) to dynamically construct event handler names, dangerous tag names, or dangerous protocols at render time (e.g. {% set x = "on" ~ "error" %}). The validator sees only the harmless Twig expression and allows the content, but after Twig rendering the output (rendered via {{ page.content|raw }}) contains an active payload such as <img src=1 onerror=alert(1)>, executing arbitrary JavaScript in visitors' browsers. | 8 Oct |
| CVE-2026-42447 | 5.0 medium | 0.00% | jadx_project, jadx | jadx is a Dex to Java decompiler. Prior to 1.5.6, jadx-gui is affected by an HTML injection vulnerability in the Summary tab because SummaryNode.java appends arches and perArchCount values derived from .so file path components inside an APK into an HTML panel without escaping. A malicious APK with an HTML URL-encoded ZIP entry name can force rendering of arbitrary HTML, perform out-of-band requests, disclose the victim IP address, or interact with locally exposed applications. This issue is fixed in version 1.5.6. | Sat 24 Oct |
| CVE-2025-64719 | 4.9 medium | 0.00% | no CPE yet | Gogs is an open source self-hosted Git service. Prior to 0.14.3, a malicious user with rights to create a new file on a repository or wiki page can trigger a denial of service condition in which the pages containing the listing of files will return HTTP error 500 and render the web interface unusable for the repository or wiki. The issue is present in file internal/route/repo/wiki.go and internal/route/repo/view.go where the pages try to recover commit information. If errors are returned while recovering commit information, the page will return a 500 error and stop rendering, resulting in a denial of service. This vulnerability is fixed in 0.14.3. | 12 Oct |
Download these 289 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.