Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-76468 | 8.2 high | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco networking engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76468 are related to improper input validation that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20. | 8 Oct |
| CVE-2025-35058 | 8.2 high | 0.00% | newforma, project_center | Newforma Info Exchange (NIX) '/UserWeb/Common/MarkupServices.ashx' allows a remote, unauthenticated attacker to cause NIX to make an SMB connection to an attacker-controlled system. The attacker can capture the NTLMv2 hash of the customer-configured NIX service account. | 8 Oct |
| CVE-2026-60764 | 8.1 high | 0.00% | oracle, e-business_suite | Vulnerability in the Oracle Financials Common Modules product of Oracle E-Business Suite (component: Common Components). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Financials Common Modules. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Financials Common Modules accessible data as well as unauthorized access to critical data or complete access to all Oracle Financials Common Modules accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | Sat 24 Oct |
| CVE-2026-61031 | 8.1 high | 0.00% | oracle, e-business_suite | Vulnerability in the Oracle Financials Common Country product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Financials Common Country. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Financials Common Country accessible data as well as unauthorized access to critical data or complete access to all Oracle Financials Common Country accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | Sat 24 Oct |
| CVE-2026-61074 | 8.1 high | 0.00% | oracle, peoplesoft_enterprise_fin_common_objects | Vulnerability in the PeopleSoft Enterprise FIN Common Objects Brazil product of Oracle PeopleSoft (component: eProcurement). The supported version that is affected is 9.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise FIN Common Objects Brazil. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise FIN Common Objects Brazil. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | Sat 24 Oct |
| CVE-2026-61307 | 8.1 high | 0.00% | oracle, peoplesoft_enterprise_cc_common_application_objects | Vulnerability in the PeopleSoft Enterprise CC Common Application Objects product of Oracle PeopleSoft (component: Common Application Objects). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise PeopleSoft Enterprise CC Common Application Objects. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise CC Common Application Objects. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-62471 | 8.1 high | 0.00% | oracle, hyperion_infrastructure_technology | Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Events). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-62477 | 8.1 high | 0.00% | oracle, hyperion_infrastructure_technology | Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | 22 Oct |
| CVE-2026-62501 | 8.1 high | 0.00% | oracle, hyperion_infrastructure_technology | Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Events). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-62502 | 8.1 high | 0.00% | oracle, hyperion_infrastructure_technology | Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Events). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | 22 Oct |
| CVE-2026-71112 | 8.1 high | 0.00% | oracle, peoplesoft_enterprise_fin_common_objects | Vulnerability in the PeopleSoft Enterprise FIN Common Objects product of Oracle PeopleSoft (component: Security). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise FIN Common Objects. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise FIN Common Objects. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | 22 Oct |
| CVE-2026-68472 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate EHT MLE before MLD ID read cfg80211_gen_new_ie() copies ML probe response elements from the parent frame when the parent EHT multi-link element has an MLD ID matching the nontransmitted BSSID index. The code only checked that the extension element had more than one byte before calling ieee80211_mle_get_mld_id(). That helper assumes a BASIC MLE with enough common info and documents that callers must first use ieee80211_mle_type_ok(). Attack chain: malicious AP sends a short EHT MLE in an MBSSID beacon. cfg80211_inform_bss_frame_data() stores the copied IE buffer. cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE. cfg80211_gen_new_ie() sees the EHT MLE in the parent frame. ieee80211_mle_get_mld_id() then reads past the IE boundary. Validate the MLE type and size before reading the MLD ID. This matches the contract required by the MLE helper and rejects the short element before any internal MLE fields are accessed. | 19 Oct |
| CVE-2026-97570 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | 19 Oct |
| CVE-2025-40309 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | 15 Oct |
| CVE-2024-56692 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node blkaddr in truncate_node() syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2534! RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 Call Trace: truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909 f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288 f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856 evict+0x4e8/0x9b0 fs/inode.c:723 f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986 f2fs_create+0x357/0x530 fs/f2fs/namei.c:394 lookup_open fs/namei.c:3595 [inline] open_last_lookups fs/namei.c:3694 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3930 do_filp_open+0x235/0x490 fs/namei.c:3960 do_sys_openat2+0x13e/0x1d0 fs/open.c:1415 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 The root cause is: on a fuzzed image, blkaddr in nat entry may be corrupted, then it will cause system panic when using it in f2fs_invalidate_blocks(), to avoid this, let's add sanity check on nat blkaddr in truncate_node(). | 12 h ago |
| CVE-2024-53168 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0 Read of size 1 at addr ffff888111f322cd by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 Call Trace: <IRQ> dump_stack_lvl+0x68/0xa0 print_address_description.constprop.0+0x2c/0x3d0 print_report+0xb4/0x270 kasan_report+0xbd/0xf0 tcp_write_timer_handler+0x156/0x3e0 tcp_write_timer+0x66/0x170 call_timer_fn+0xfb/0x1d0 __run_timers+0x3f8/0x480 run_timer_softirq+0x9b/0x100 handle_softirqs+0x153/0x390 __irq_exit_rcu+0x103/0x120 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242 RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0 default_idle_call+0x6b/0xa0 cpuidle_idle_call+0x1af/0x1f0 do_idle+0xbc/0x130 cpu_startup_entry+0x33/0x40 rest_init+0x11f/0x210 start_kernel+0x39a/0x420 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x97/0xa0 common_startup_64+0x13e/0x141 </TASK> Allocated by task 595: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x87/0x90 kmem_cache_alloc_noprof+0x12b/0x3f0 copy_net_ns+0x94/0x380 create_new_namespaces+0x24c/0x500 unshare_nsproxy_namespaces+0x75/0xf0 ksys_unshare+0x24e/0x4f0 __x64_sys_unshare+0x1f/0x30 do_syscall_64+0x70/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 100: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x54/0x70 kmem_cache_free+0x156/0x5d0 cleanup_net+0x5d3/0x670 process_one_work+0x776/0xa90 worker_thread+0x2e2/0x560 kthread+0x1a8/0x1f0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Reproduction script: mkdir -p /mnt/nfsshare mkdir -p /mnt/nfs/netns_1 mkfs.ext4 /dev/sdb mount /dev/sdb /mnt/nfsshare systemctl restart nfs-server chmod 777 /mnt/nfsshare exportfs -i -o rw,no_root_squash *:/mnt/nfsshare ip netns add netns_1 ip link add name veth_1_peer type veth peer veth_1 ifconfig veth_1_peer 11.11.0.254 up ip link set veth_1 netns netns_1 ip netns exec netns_1 ifconfig veth_1 11.11.0.1 ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \ --tcp-flags FIN FIN -j DROP (note: In my environment, a DESTROY_CLIENTID operation is always sent immediately, breaking the nfs tcp connection.) ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \ 11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1 ip netns del netns_1 The reason here is that the tcp socket in netns_1 (nfs side) has been shutdown and closed (done in xs_destroy), but the FIN message (with ack) is discarded, and the nfsd side keeps sending retransmission messages. As a result, when the tcp sock in netns_1 processes the received message, it sends the message (FIN message) in the sending queue, and the tcp timer is re-established. When the network namespace is deleted, the net structure accessed by tcp's timer handler function causes problems. To fix this problem, let's hold netns refcnt for the tcp kernel socket as done in other modules. This is an ugly hack which can easily be backported to earlier kernels. A proper fix which cleans up the interfaces will follow, but may not be so easy to backport. | 12 h ago |
| CVE-2024-44941 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to cover read extent cache access with lock syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097 CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46 do_read_inode fs/f2fs/inode.c:509 [inline] f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560 f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237 generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413 exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444 exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584 do_handle_to_path fs/fhandle.c:155 [inline] handle_to_path fs/fhandle.c:210 [inline] do_handle_open+0x495/0x650 fs/fhandle.c:226 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We missed to cover sanity_check_extent_cache() w/ extent cache lock, so, below race case may happen, result in use after free issue. - f2fs_iget - do_read_inode - f2fs_init_read_extent_tree : add largest extent entry in to cache - shrink - f2fs_shrink_read_extent_tree - __shrink_extent_tree - __detach_extent_node : drop largest extent entry - sanity_check_extent_cache : access et->largest w/o lock let's refactor sanity_check_extent_cache() to avoid extent cache access and call it before f2fs_init_read_extent_tree() to fix this issue. | 12 h ago |
| CVE-2024-27062 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: nouveau: lock the client object tree. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink ---truncated--- | 12 h ago |
| CVE-2024-26589 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". | 12 h ago |
| CVE-2023-53846 | 7.8 high | — | linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on direct node in truncate_dnode() syzbot reports below bug: BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000 CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574 truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944 f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154 f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721 f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749 f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799 f2fs_truncate include/linux/fs.h:825 [inline] f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006 notify_change+0xb2c/0x1180 fs/attr.c:483 do_truncate+0x143/0x200 fs/open.c:66 handle_truncate fs/namei.c:3295 [inline] do_open fs/namei.c:3640 [inline] path_openat+0x2083/0x2750 fs/namei.c:3791 do_filp_open+0x1ba/0x410 fs/namei.c:3818 do_sys_openat2+0x16d/0x4c0 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_creat fs/open.c:1448 [inline] __se_sys_creat fs/open.c:1442 [inline] __x64_sys_creat+0xcd/0x120 fs/open.c:1442 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is, inodeA references inodeB via inodeB's ino, once inodeA is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's node page, it traverse mapping data from node->i.i_addr[0] to node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access. This patch fixes to add sanity check on dnode page in truncate_dnode(), so that, it can help to avoid triggering such issue, and once it encounters such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE error into superblock, later fsck can detect such issue and try repairing. Also, it removes f2fs_truncate_data_blocks() for cleanup due to the function has only one caller, and uses f2fs_truncate_data_blocks_range() instead. | 12 h ago |
| CVE-2026-50697 | 7.8 high | 0.00% | microsoft, windows 10 version 1607, windows 10 version 1809, windows 10 version 21h2 | Exposure of sensitive information to an unauthorized actor in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. | Wed 28 Oct |
| CVE-2023-53692 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline Syzbot found the following issue: loop0: detected capacity change from 0 to 2048 EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. ================================================================== BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 Read of size 4 at addr ffff888073644750 by task syz-executor420/5067 CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline] ext4_da_map_blocks fs/ext4/inode.c:1806 [inline] ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285 ext4_file_write_iter+0x1d0/0x18f0 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4b7a9737b9 RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9 RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Above issue is happens when enable bigalloc and inline data feature. As commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for bigalloc + inline. But it only resolved issue when has inline data, if inline data has been converted to extent(ext4_da_convert_inline_data_to_extent) before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However i_data is still store inline data in this scene. Then will trigger UAF when find extent. To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)" in ext4_clu_mapped(). | Wed 28 Oct |
| CVE-2026-70233 | 7.8 high | 0.00% | microsoft, windows_10_1607, windows_10_1809, windows_10_21h2 | Heap-based buffer overflow in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. | Wed 28 Oct |
| CVE-2026-18413 | 7.8 high | 0.00% | zephyrproject, zephyr | The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. | Tue 27 Oct |
| CVE-2026-18414 | 7.8 high | 0.00% | zephyrproject, zephyr | The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. | Tue 27 Oct |
| CVE-2026-41035 | 7.8 high | 0.00% | samba, rsync | In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. | Mon 26 Oct |
| CVE-2026-6846 | 7.8 high | 0.00% | gnu, redhat, binutils, hardened_images, openshift_container_platform | A flaw was found in binutils. A heap-buffer-overflow vulnerability exists when processing a specially crafted XCOFF (Extended Common Object File Format) object file during linking. A local attacker could trick a user into processing this malicious file, which could lead to arbitrary code execution, allowing the attacker to run unauthorized commands, or cause a denial of service, making the system unavailable. | Mon 26 Oct |
| CVE-2026-63879 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_hmm_range_get_pages The notifier sequence must only be read once or otherwise we could work with invalid pages. While at it also fix the coding style, e.g. drop the pre-initialized return value and use the common define for 2G range. (cherry picked from commit c08972f555945cda57b0adb72272a37910153390) | Mon 26 Oct |
| CVE-2026-99053 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: hold a reference to nodes found by link name tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG: KASAN: slab-use-after-free in _raw_read_lock_bh Write of size 4 at addr ffff88807e06f008 by task poc/92 Call Trace: _raw_read_lock_bh kernel/locking/spinlock.c:287 tipc_nl_node_set_link net/tipc/node.c:2475 genl_family_rcv_msg_doit net/netlink/genetlink.c:1114 genl_rcv_msg net/netlink/genetlink.c:1209 netlink_rcv_skb net/netlink/af_netlink.c:2575 Allocated by task 0: tipc_node_create net/tipc/node.c:539 tipc_node_check_dest net/tipc/node.c:1196 tipc_disc_rcv net/tipc/discover.c:252 Freed by task 92: kfree mm/slub.c:6801 rcu_core kernel/rcu/tree.c:2919 Last potentially related work creation: __call_rcu_common.constprop.0 kernel/rcu/tree.c:3181 tipc_node_timeout net/tipc/node.c:814 Acquire a reference to the selected node with kref_get_unless_zero() before leaving RCU, returning NULL if the node has already been released. Release that reference on every caller exit after the last node access, including transmission in LINK_SET. Keep the existing link lookup order and locking so concurrent link removal still takes the existing error paths. | Sat 24 Oct |
| CVE-2026-98517 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 ar ---truncated--- | Sat 24 Oct |
| CVE-2026-98515 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix double-free in nvif_vmm_dtor On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear the client down. Then, nouveau_drm_open() also enters into its cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini() calls nouveau_vmm_fini(): void nouveau_vmm_fini(struct nouveau_vmm *vmm) { nouveau_svmm_fini(&vmm->svmm); nvif_vmm_dtor(&vmm->vmm); vmm->cli = NULL; } Inside nvif_vmm_dtor(), vmm->page is freed unconditionally: void nvif_vmm_dtor(struct nvif_vmm *vmm) { kfree(vmm->page); nvif_object_dtor(&vmm->object); } vmm->page is never cleared after being freed, so the second call of nvif_vmm_dtor() will cause a double-free. Found by fuzzing the nouveau driver with a modified Syzkaller: BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 Free of addr ffff888010fcdc30 by task syz.0.173/2567 CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557 check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235 kasan_slab_pre_free include/linux/kasan.h:199 [inline] slab_free_hook mm/slub.c:2622 [inline] slab_free mm/slub.c:6377 [inline] kfree+0x192/0x590 mm/slub.c:6692 nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194 nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127 nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225 nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255 drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176 drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335 drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388 drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211 chrdev_open+0x21c/0x660 fs/char_dev.c:411 do_dentry_open+0x59d/0x12b0 fs/open.c:947 vfs_open+0x82/0x390 fs/open.c:1052 do_open fs/namei.c:4700 [inline] path_openat+0x2345/0x3420 fs/namei.c:4863 do_file_open+0x207/0x460 fs/namei.c:4892 do_sys_openat2+0xd1/0x1d0 fs/open.c:1368 do_sys_open fs/open.c:1374 [inline] __do_sys_openat fs/open.c:1390 [inline] __se_sys_openat fs/open.c:1385 [inline] __x64_sys_openat+0x144/0x200 fs/open.c:1385 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6d687594d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760 </TASK> Allocated by task 2567 on cpu 1 at 163.593900s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237 nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134 nouveau_cli_init+0x7b9/0 ---truncated--- | Sat 24 Oct |
| CVE-2026-20291 | 7.8 high | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20291 are related to issues concerning improper privilege management that are grouped under the Common Weakness Enumeration (CWE) Base CWE-269. | 22 Oct |
| CVE-2026-76479 | 7.8 high | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76479 are related to issues concerning improper limitation of a pathname to a restricted directory that are grouped under the Common Weakness Enumeration (CWE) Base CWE-22. | 22 Oct |
| CVE-2026-76494 | 7.8 high | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76494 are related to issues concerning code injections that are grouped under the Common Weakness Enumeration (CWE) Base CWE-94. | 22 Oct |
| CVE-2026-76495 | 7.8 high | 0.00% | no CPE yet | As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76495 are related to issues concerning incorrect permission assignments that are grouped under the Common Weakness Enumeration (CWE) Variant CWE-732. | 22 Oct |
| CVE-2026-64036 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | 21 Oct |
| CVE-2026-53109 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/[email protected]/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free(). | 21 Oct |
| CVE-2026-53024 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: <TASK> gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f Disconnect calls gb_connection_destroy, which ends up freeing the connection object. When gb_operation_sync is called in the write file operations, its gets a freed connection as parameter and the kernel panics. The gb_connection_destroy cannot be moved out of the disconnect function, as the Greybus subsystem expect all connections belonging to a bundle to be destroyed when disconnect returns. To prevent this bug, use a rw lock to synchronize access between write and disconnect. This guarantees that the write function doesn't try to use a disconnected connection. | 21 Oct |
| CVE-2025-68175 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix streaming cleanup on release The current implementation unconditionally calls mxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This can lead to situations where any release call (like from a simple "v4l2-ctl -l") may release a currently streaming queue when called on such a device. This is reproducible on an i.MX8MP board by streaming from an ISI capture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesink While this stream is running, querying the caps of the same device provokes the error state: v4l2-ctl -l -d /dev/videoX This results in the following trace: [ 155.452152] ------------[ cut here ]------------ [ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6 [ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT [ 157.064369] Hardware name: imx8mp_board_01 (DT) [ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi] [ 157.087126] sp : ffff800080003ee0 [ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000 [ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50 [ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000 [ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000 [ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000 [ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38 [ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000 [ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000 [ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200 [ 157.161850] Call trace: [ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P) [ 157.170319] __handle_irq_event_percpu+0x58/0x218 [ 157.175029] handle_irq_event+0x54/0xb8 [ 157.178867] handle_fasteoi_irq+0xac/0x248 [ 157.182968] handle_irq_desc+0x48/0x68 [ 157.186723] generic_handle_domain_irq+0x24/0x38 [ 157.191346] gic_handle_irq+0x54/0x120 [ 157.195098] call_on_irq_stack+0x24/0x30 [ 157.199027] do_interrupt_handler+0x88/0x98 [ 157.203212] el0_interrupt+0x44/0xc0 [ 157.206792] __el0_irq_handler_common+0x18/0x28 [ 157.211328] el0t_64_irq_handler+0x10/0x20 [ 157.215429] el0t_64_irq+0x198/0x1a0 [ 157.219009] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the vb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal of the manual cleanup from mxc_isi_video_release(). | 21 Oct |
| CVE-2025-38582 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix double destruction of rsv_qp rsv_qp may be double destroyed in error flow, first in free_mr_init(), and then in hns_roce_exit(). Fix it by moving the free_mr_init() call into hns_roce_v2_init(). list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240 ... Call trace: __list_del_entry_valid+0x148/0x240 hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2] hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2] hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2] free_mr_exit+0x6c/0x120 [hns_roce_hw_v2] hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2] hns_roce_exit+0x118/0x350 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2] hclge_notify_roce_client+0x6c/0x160 [hclge] hclge_reset_rebuild+0x150/0x5c0 [hclge] hclge_reset+0x10c/0x140 [hclge] hclge_reset_subtask+0x80/0x104 [hclge] hclge_reset_service_task+0x168/0x3ac [hclge] hclge_service_task+0x50/0x100 [hclge] process_one_work+0x250/0x9a0 worker_thread+0x324/0x990 kthread+0x190/0x210 ret_from_fork+0x10/0x18 | 21 Oct |
| CVE-2025-21722 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty() to set a data or metadata buffer as dirty, but it detects that the buffer is not in the uptodate state: WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520 fs/buffer.c:1177 ... Call Trace: <TASK> nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598 nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73 nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344 nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The other is when nilfs_btree_propagate(), which propagates the dirty state to the ancestor nodes of a b-tree that point to a dirty buffer, detects that the origin buffer is not dirty, even though it should be: WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089 nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089 ... Call Trace: <TASK> nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345 nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587 nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006 nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline] nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115 nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline] nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Both of these issues are caused by the callbacks that handle the page/folio write requests, forcibly clear various states, including the working state of the buffers they hold, at unexpected times when they detect read-only fallback. Fix these issues by checking if the buffer is referenced before clearing the page/folio state, and skipping the clear if it is. | 21 Oct |
| CVE-2025-21650 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | 21 Oct |
| CVE-2026-97594 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | 21 Oct |
| CVE-2026-93144 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | 21 Oct |
| CVE-2026-74257 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sockmap: Fix use-after-free in udp_bpf_recvmsg() syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0] sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock, but its processing is lockless. Thus, sk_msg_recvmsg() must be serialised by callers, otherwise multiple threads could touch the same sk_msg. For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock. Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited commit removed it. Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg(). Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not an option due to copy_page_to_iter() in sk_msg_recvmsg(). [0]: BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020 CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428 udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84 inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891 sock_recvmsg_nosec net/socket.c:1078 [inline] sock_recvmsg+0x1a8/0x270 net/socket.c:1100 ____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812 ___sys_recvmsg+0x215/0x590 net/socket.c:2854 do_recvmmsg+0x334/0x800 net/socket.c:2949 __sys_recvmmsg net/socket.c:3023 [inline] __do_sys_recvmmsg net/socket.c:3046 [inline] __se_sys_recvmmsg net/socket.c:3039 [inline] __x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb319f9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9 RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004 RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98 </TASK> Allocated by task 6019: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] alloc_sk_msg net/core/skmsg.c:510 [inline] sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612 sk_psock_verdict_apply net/core/skmsg.c:1038 [inline] sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236 udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045 sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257 __udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789 __udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline] udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475 __udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585 __udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318 dst_input include/net/dst.h:474 [inline] ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584 ip_list_rcv_finish net/ipv4/ip_inp ---truncated--- | 21 Oct |
| CVE-2026-72009 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | 21 Oct |
| CVE-2026-91041 | 7.8 high | 0.00% | no CPE yet | Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer. | 20 Oct |
| CVE-2026-64098 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences(). | 19 Oct |
| CVE-2025-39776 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: clear page table entries at destroy_args() The mm/debug_vm_pagetable test allocates manually page table entries for the tests it runs, using also its manually allocated mm_struct. That in itself is ok, but when it exits, at destroy_args() it fails to clear those entries with the *_clear functions. The problem is that leaves stale entries. If another process allocates an mm_struct with a pgd at the same address, it may end up running into the stale entry. This is happening in practice on a debug kernel with CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra debugging I added (it prints a warning trace if pgtables_bytes goes negative, in addition to the warning at check_mm() function): [ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000 [ 2.539366] kmem_cache info [ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508 [ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e (...) [ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0 [ 2.552816] Modules linked in: [ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY [ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries [ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90 [ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug) [ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a [ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0 [ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001 [ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff [ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000 [ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb [ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0 [ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000 [ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001 [ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760 [ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0 [ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0 [ 2.553199] Call Trace: [ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable) [ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0 [ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570 [ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650 [ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290 [ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0 [ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870 [ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150 [ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50 [ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0 [ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec (...) [ 2.558892] ---[ end trace 0000000000000000 ]--- [ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1 [ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144 Here the modprobe process ended up with an allocated mm_struct from the mm_struct slab that was used before by the debug_vm_pgtable test. That is not a problem, since the mm_stru ---truncated--- | 19 Oct |
| CVE-2025-39860 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK> Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated--- | 19 Oct |
Download these 866 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.