Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-59185 | 8.5 high | 0.00% | no CPE yet | identrail is a machine identity security platform for AWS, GitHub/OIDC, and Kubernetes. Prior to 1.0.2, the default-on `POST /v1/workspaces/:workspace_id/projects/:project_id/github/connect/complete` endpoint in `internal/api/router.go` accepts `installation_id` from the request body or `X-GitHub-Installation-ID` header without verifying the installation belongs to the caller's workspace. `CompleteGitHubConnection` in `internal/api/github_connect.go` rigorously binds `state` to the caller's tenant, workspace, and project, but checks only that the installation ID is positive before persisting it as the caller's connection. `ListInstallationRepositories` in `internal/connectors/github/repositories.go` invokes token creation through `internal/connectors/github/app.go` and `POST /app/installations/{installationId}/access_tokens`, using the application's JWT. An authenticated tenant who starts a legitimate connection can supply another customer's non-secret installation ID to read the victim organization's private repository inventory, content, and metadata or drive posture scans, provided identrail's GitHub App is installed there. The default-off V2 `CompleteGitHubConnector` path shares the installation-ownership gap and additionally matches pending `state` without rechecking caller scope. This issue is fixed in version 1.0.2. | Wed 28 Oct |
| CVE-2026-112357 | 8.5 high | 0.00% | no CPE yet | GFI KerioConnect (Kerio Connect) Outlook Connector (Offline Edition), 'KOFF', before 10.0.9 Patch 2 contains a local privilege escalation vulnerability caused by weak installer permissions that leave the product directory writable by the built-in Users group. A local non-administrative attacker can replace the searchd.exe service binary used by the bundled KOFFIndexingService, which runs as LocalSystem, to execute arbitrary code with NT AUTHORITY\SYSTEM privileges upon the next service start or reboot. | Wed 28 Oct |
| CVE-2026-6272 | 8.5 high | 0.00% | no CPE yet | A client holding only a read JWT scope can still register itself as a signal provider through the production kuksa.val.v2 OpenProviderStream API by sending ProvideSignalRequest. 1. Obtain any valid token with only read scope. 2. Connect to the normal production gRPC API (kuksa.val.v2). 3. Open OpenProviderStream. 4. Send ProvideSignalRequest for a target signal ID. 5. Wait for the broker to forward GetProviderValueRequest. 6. Reply with attacker-controlled GetProviderValueResponse. 7. Other clients performing GetValue / GetValues for that signal receive forged data. | Mon 26 Oct |
| CVE-2024-32010 | 8.5 high | 0.00% | no CPE yet | A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to extraction of database credentials via a world-readable credential file. This allows an attacker to connect to the database as privileged application user and to run system commands via the database. | Fri 23 Oct |
| CVE-2026-107782 | 8.5 high | 0.00% | no CPE yet | System Informer before 4.0.26241.138 contains an incorrect authorization vulnerability in the phsvc helper that allows local attackers to reach privileged APIs by connecting from any Authenticode-signed process. Attackers can load code into a Microsoft-signed host like rundll32.exe, connect to SiSvcApiPort, and call PhSvcApiCreateService to execute code as SYSTEM. | 14 Oct |
| CVE-2026-11858 | 8.4 high | 0.00% | no CPE yet | Quanos SCHEMA ST4 on-premises contains a local privilege escalation vulnerability in the Client Update Service. The update service runs as NT AUTHORITY\SYSTEM and exposes a .NET Remoting interface over a named pipe without sufficient access controls or authorization. A local authenticated low-privileged user can connect to the interface and invoke privileged update methods such as Update(). This allows arbitrary file write and delete operations with SYSTEM privileges and can be used to achieve local privilege escalation. | Mon 26 Oct |
| CVE-2026-24066 | 8.4 high | 0.00% | no CPE yet | Slate Digital Connect 1.37.0 for macOS installs a privileged helper tool, com.slatedigital.connect.privileged.helper.tool, which exposes the XPC service com.slatedigital.connect.privileged.helper.tool2. The helper validates connecting XPC clients by checking only the subject.OU value of the client's signing certificate and does not verify that the certificate chains to a trusted code-signing authority. A local attacker can sign a malicious client with a self-signed certificate containing the expected organizational unit value and connect to the privileged XPC service. This allows unauthorized access to privileged helper functionality and may lead to local privilege escalation. | Mon 26 Oct |
| CVE-2026-24067 | 8.4 high | 0.00% | no CPE yet | Slate Digital Connect 1.37.0 for macOS installs a privileged helper tool, com.slatedigital.connect.privileged.helper.tool, which exposes the XPC service com.slatedigital.connect.privileged.helper.tool2. The helper validates connecting XPC clients by obtaining the client's process identifier and using it to retrieve code-signing information for the process. This PID-based client validation is subject to a time-of-check time-of-use race condition because process identifiers can be reused. A local attacker can exploit PID reuse so that validation is performed against a trusted process instead of the original connecting process. This allows unauthorized access to privileged helper functionality and may lead to local privilege escalation. | Mon 26 Oct |
| CVE-2026-63388 | 8.4 high | 0.00% | no CPE yet | Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a heap out-of-bounds write in bufferevent_sock.c when bufferevent_socket_set_conn_address_ copies a kernel-supplied AF_UNIX peer address into bufferevent_private.conn_address. Release builds compiled with NDEBUG disable the EVUTIL_ASSERT length guard, and the evhttp accept path can pass a 110-byte sockaddr from accept() into the 28-byte field. An unauthenticated local peer able to connect to an AF_UNIX listener can overwrite the adjacent dns_request pointer and heap data, causing memory corruption with confidentiality, integrity, and availability impact. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. | Mon 26 Oct |
| CVE-2026-11857 | 8.4 high | 0.00% | no CPE yet | Quanos SCHEMA ST4 on-premises contains a local privilege escalation vulnerability in the Client Update Service due to insecure deserialization in the .NET Remoting service. The service is configured with TypeFilterLevel.Full and is bound to local interfaces only through named pipes. A local authenticated attacker can connect to the local named pipe, obtain the .NET Remoting endpoint, and send specially crafted serialized objects. Successful exploitation results in arbitrary code execution in the context of the update process with NT AUTHORITY\SYSTEM privileges. Network-only exploitation is not possible and local host access with an authenticated user session is required. | Sun 25 Oct |
| CVE-2026-55978 | 8.4 high | 0.00% | no CPE yet | An improper access control vulnerability in CatchPulse could allow a non-administrative local attacker to connect to an unrestricted kernel filter communication port and bypass CatchPulse's security policy enforcement. | Sat 24 Oct |
| CVE-2026-99042 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code. | Sat 24 Oct |
| CVE-2026-105453 | 8.4 high | 0.00% | no CPE yet | IBM Sterling Connect Direct for Unix 6.3.0.0 through 6.3.0.7 and 6.4.0.0 through 6.4.0.6 could allow a local attacker to gain elevated privileges due to improper privilege management. | 21 Oct |
| CVE-2026-72243 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: selinux: check connect-related permissions on TCP Fast Open Similar to Landlock, SELinux was not updated when TCP Fast Open support was introduced to ensure connect-related permissions are checked when using TCP Fast Open. Update its socket_sendmsg() hook to call selinux_socket_connect() when MSG_FASTOPEN is passed. | 16 Oct |
| CVE-2026-114088 | 8.3 high | 0.00% | no CPE yet | Trigger.dev before 4.5.4 contains a hardcoded default secret vulnerability in the /coordinator Socket.IO namespace that allows unauthenticated attackers to connect using the published coordinator-secret value. Attackers can emit READY_FOR_EXECUTION to retrieve decrypted run environment variables or send TASK_RUN_FAILED_TO_RUN and similar events to tamper with arbitrary runs. | Tue 27 Oct |
| CVE-2026-33779 | 8.3 high | 0.00% | juniper, junos | An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it. When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S9, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2. | Mon 26 Oct |
| CVE-2026-57273 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in username field (no key present) | Sun 25 Oct |
| CVE-2026-57274 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in password field (no key present) | Sun 25 Oct |
| CVE-2026-57275 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in username field (key present) | Sun 25 Oct |
| CVE-2026-57276 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in password field (key present) | Sun 25 Oct |
| CVE-2026-57277 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in key field | Sun 25 Oct |
| CVE-2026-57278 | 8.3 high | 0.00% | no CPE yet | GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in ip field | Sun 25 Oct |
| CVE-2026-62143 | 8.3 high | 0.00% | no CPE yet | A Server-Side Request Forgery (SSRF) protection bypass existed in the html_to_markdown expansion module of misp-modules. The module attempts to prevent requests to loopback, private, link-local, and other restricted IP address ranges. However, IP addresses were compared against the blocked ranges without first normalising IPv4-mapped IPv6 addresses. An authenticated attacker able to invoke the module could supply an IPv4-mapped IPv6 address, such as: http://[::ffff:127.0.0.1]/ http://[::ffff:169.254.169.254]/ Alternatively, the attacker could use a hostname that resolves to an IPv4-mapped IPv6 address. These addresses were treated as IPv6 addresses and therefore did not match the corresponding blocked IPv4 ranges. Successful exploitation could cause the misp-modules server to connect to services available through its loopback interface, internal network, or link-local network. This could expose internal web services, administrative interfaces, or cloud instance metadata, with retrieved content potentially returned to the attacker as converted Markdown. The vulnerability has been addressed by normalising IPv4-mapped IPv6 addresses to their underlying IPv4 representation before applying the blocked-range checks. URLs without a valid hostname are now also rejected. | Sat 24 Oct |
| CVE-2026-47158 | 8.3 high | 0.00% | no CPE yet | Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.36.0, Vaultwarden's SSO authorization flow did not bind the OAuth state parameter accepted by /connect/authorize to the initiating browser session, allowed attacker-controlled PKCE parameters, and left SsoAuth records intact after failed token exchange, allowing an unauthenticated attacker to induce IdP authentication and redeem tokens for a fully authenticated session. This issue is fixed in version 1.36.0. | Sat 24 Oct |
| CVE-2026-65635 | 8.3 high | 0.00% | no CPE yet | Improper Isolation or Compartmentalization vulnerability in malach-it boruta (Elixir.Boruta.Openid module) allows attackers to register OpenID Connect clients with administrative privileges through the dynamic client registration entry point. Boruta.Openid.register_client/3 forwards caller-supplied registration parameters to the administrative client creation path without a public/admin field-level allowlist, so an unauthenticated registrant can set security-sensitive attributes including supported grant types, authorized scopes, PKCE enforcement, public refresh and revocation behavior, token lifetimes, and signing settings. The library does not distinguish between metadata a public registrant is allowed to set and administrative controls that should require operator approval. This vulnerability is associated with program files lib/boruta/openid.ex and program routines 'Elixir.Boruta.Openid':register_client/3, 'Elixir.Boruta.Openid':parse_registration_params/2. This issue affects boruta from 2.3.0 before 2.3.7. | Fri 23 Oct |
| CVE-2026-111638 | 8.3 high | 0.00% | no CPE yet | sshportal through 1.19.5 contains a missing authorization vulnerability in the management shell 'key show' command that allows authenticated non-admin users to obtain decrypted backend private SSH keys. Attackers can request predictable key names like 'default' or 'host' to retrieve private keys and connect directly to backend hosts, bypassing ACLs and session recording. | 23 Oct |
| CVE-2026-68352 | 8.3 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer. | 19 Oct |
| CVE-2026-48764 | 8.2 high | 0.00% | no CPE yet | TypeBot is a chatbot builder tool. In versions prior to 3.17.2, SSRF validation is implemented by resolving a hostname once and checking whether the resolved IP belongs to a forbidden range allowing for DNS rebinding bypass. The root cause is a time-of-check to time-of-use gap in the SSRF guard. The validator resolves the hostname and approves it, but the later request path performs a fresh resolution and connects to whatever IP the hostname maps to at that moment. The actual outbound request is then performed later using the original hostname, without pinning the validated IP to the network connection. An attacker who can supply a URL to a public bot that performs a server-side HTTP Request block or server-side script fetch can use DNS rebinding to pass the initial validation and still force the server to connect to a private or metadata address during the real request. This enables server-side access to private network services, cloud metadata endpoints, and other internal HTTP targets that the validator was intended to block. The exact downstream impact depends on the reachable internal services. Concrete consequences include metadata disclosure, access to internal admin panels, credential theft from metadata services, and further compromise through internal-only HTTP interfaces. This issue has been fixed in version 3.17.2. | Sun 25 Oct |
| CVE-2026-67232 | 8.2 high | 0.00% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | 19 Oct |
| CVE-2025-59430 | 8.2 high | 0.00% | no CPE yet | Mesh Connect JS SDK contains JS libraries for integrating with Mesh Connect. Prior to version 3.3.2, the lack of sanitization of URLs protocols in the createLink.openLink function enables the execution of arbitrary JavaScript code within the context of the parent page. This is technically indistinguishable from a real page at the rendering level and allows access to the parent page DOM, storage, session, and cookies. If the attacker can specify customIframeId, they can hijack the source of existing iframes. This issue has been patched in version 3.3.2. | 11 Oct |
| CVE-2026-42088 | 8.1 high | 0.00% | openc3, cosmos | OpenC3 COSMOS provides the functionality needed to send commands to and receive data from one or more embedded systems. Prior to version 7.0.0-rc3, the Script Runner widget allows users to execute Python and Ruby scripts directly from the openc3-COSMOS-script-runner-api container. Because all the docker containers share a network, users can execute specially crafted scripts to bypass the API permissions check and perform administrative actions, including reading and modifying data inside the Redis database, which can be used to read secrets and change COSMOS settings, as well as read and write to the buckets service, which holds configuration, log, and plugin files. These actions are normally only available from the Admin Console or with administrative privileges. Any user with permission to create and run scripts can connect to any service in the docker network. This issue has been patched in version 7.0.0-rc3. | Mon 26 Oct |
| CVE-2026-44394 | 8.1 high | 0.00% | openstack, keystone | An issue was discovered in OpenStack Keystone before 29.0.2. The Keystone federated token rescoping mechanism does not propagate the original token's expiry to the newly issued token. When a federated user rescopes a token via POST /v3/auth/tokens, the handle_scoped_token() function in the mapped authentication plugin returns response data without an expires_at value. The token provider falls back to issuing a token with a fresh default TTL. By rescoping repeatedly before each token expires, a user can maintain access indefinitely, bypassing operator-configured token lifetime policies. This is a variant of CVE-2012-3426. Only deployments using federated identity (SAML2, OpenID Connect) are affected. | Mon 26 Oct |
| CVE-2026-49213 | 8.1 high | 0.00% | no CPE yet | TypeBot is a chatbot builder tool. Prior to 3.17.2, Typebot's shared SSRF validator in packages/lib/src/ssrf/validateHttpReqUrl.ts can be bypassed with the IPv6 unspecified address :: because validateIPAddress blocks local, metadata, and private ranges but does not block :: or its expanded form. A workspace editor or creator can configure a server-side HTTP Request block or guarded script fetch to make the Typebot server connect to local HTTP services through safeKy, including flows triggered by POST /v1/typebots/{publicId}/startChat or POST /v1/sessions/{sessionId}/continueChat. This issue is fixed in version 3.17.2. | Sun 25 Oct |
| CVE-2026-98070 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock_sock(), so a sender inside tcp_sendmsg() can never be waited on while we hold the socket lock. Two details of the old code go away with the same change: - t_sock is now read only after the lock is acquired. The old code cached it before waiting; the teardown in rds_conn_shutdown() releases that socket and clears t_sock, so a pointer cached before the wait can be stale by the time the accept path resumes. Reading it under RDS_IN_XMIT is what makes the exclusion complete once the teardown owns the same lock, which the next patch arranges; until then the teardown still only samples the bit, and the two paths remain as exposed to each other as they are today. - The old !osock early path called rds_send_path_reset() with no serialization at all. It now runs under the lock like the normal path. The conditional RDS_CONN_RESETTING transition of the previous patch happens before the socket check either way: a path found without a socket is either still connecting (its reconnect worker blocked on t_conn_path_lock) and legitimately goes RESETTING -> UP on the new socket, or it has been torn down meanwhile and is dropped. The in-function comment describing the old wait-based quiesce is rewritten to describe the lock-based one, and the stale block comment above the function (which still described a return value and an incomplete list of t_sock writers) is refreshed to name all four writers - the connect, accept, teardown and swap paths - and what serializes each of them. | 19 Oct |
| CVE-2026-89524 | 8.1 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx() bounds the declared lengths from above (their sum must fit the received event), but an assoc request/response shorter than its fixed offset still underflows here: the u8 wraps to ~250, and cfg80211_connect_result() / cfg80211_roamed() then treat that wrapped value as the IE length and copy that many bytes out of the small assoc_info buffer to user space via nl80211, disclosing adjacent slab memory. Clamp both lengths to their offsets before subtracting. Found by 0sec (https://0sec.ai) using automated source analysis; the missing lower bound is evident from source. Compile-tested. | 19 Oct |
| CVE-2026-73597 | 8.1 high | 0.00% | dell, policy_manager_for_secure_connect_gateway | Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Cross-Site Request Forgery (CSRF) vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Launch of phishing attacks, and Protection mechanism bypass. | 15 Oct |
| CVE-2026-78022 | 8.1 high | 0.00% | dell, policy_manager_for_secure_connect_gateway | Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Not Failing Securely ('Failing Open') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. | 13 Oct |
| CVE-2026-104797 | 8.1 high | 0.00% | no CPE yet | The Advanced Form Integration — Connect Forms to 300+ Apps plugin for WordPress is vulnerable to Authentication Bypass via Unverified Password Change in all versions up to, and including, 2.9.0 The `adfoin_ultimatememberac_send_data` function, which powers the Ultimate Member "Update Profile Field" action, resolves the target WordPress user from an attacker-supplied email address and passes an attacker-controlled field key and value directly to `UM()->user()->update_profile()` in the `account` context — which explicitly bypasses Ultimate Member's banned-key validation — without performing any submitter identity verification, ownership check, capability check, current-password reauthentication, or restriction on sensitive keys such as `user_pass`. This makes it possible for unauthenticated attackers to change the password of any WordPress user account, including Administrator accounts, by submitting a public Contact Form 7 form with a target email and `user_pass` as the field key, enabling full site takeover. Exploitation requires an administrator to have pre-configured a Contact Form 7 integration that maps the target email, field key, and value from public form inputs to the Ultimate Member Update Profile Field action — the exact workflow the plugin's own UI advertises for this action type. | 13 Oct |
| CVE-2026-108479 | 8.1 high | 0.00% | no CPE yet | Cross-Site Request Forgery (CSRF) vulnerability in Patreon Patreon WordPress patreon-connect allows Cross Site Request Forgery.This issue affects Patreon WordPress: from n/a through 1.9.17. | 13 Oct |
| CVE-2026-107384 | 8.1 high | 0.00% | no CPE yet | MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. From 3.2.0 until 3.2.5, 3.3.4, 3.4.7, and 3.5.4, applications that enable permitSetMultiParamEntries can pass objects whose keys are expanded into a SQL SET clause without being processed by escapeId. An attacker-controlled key containing a backtick can close the quoted identifier and cause the remainder of the key to be interpreted as SQL. This can update columns the application did not intend to expose and can append arbitrary SQL with the database user's privileges. The option is disabled by default, and serialized-object handling used when it is disabled is not affected. This issue is fixed in versions 3.2.5, 3.3.4, 3.4.7, and 3.5.4. | 9 Oct |
| CVE-2025-49552 | 8.1 high | 0.00% | adobe, connect | Adobe Connect versions 12.9 and earlier are affected by a DOM-based Cross-Site Scripting (XSS) vulnerability that could be exploited by a high-privileged attacker to execute malicious scripts in a victim's browser. Exploitation of this issue requires user interaction in that a victim must navigate to a crafted web page. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality and integrity impact as high. Scope is changed. | 8 Oct |
| CVE-2026-118603 | 8.0 high | 0.00% | no CPE yet | Alpine iLX-F511 vCard Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Alpine iLX-F511 devices. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device. The specific flaw exists within the parsing of vCard data. The issue results from the lack of proper validation of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29017. | Wed 28 Oct |
| CVE-2026-48080 | 8.0 high | 0.00% | no CPE yet | OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.2, the `GET /api/tenants/{id}` endpoint returns the full tenant record to any authenticated `TENANT_ADMIN` of that tenant, including the `databaseUrl` field. This field contains the live PostgreSQL connection string the application uses to connect to that tenant's database. In the tested official `docker-compose.prod.yml` deployment, the connection string contained the user `postgres` with `rolsuper=true` and the plaintext password from `secrets/postgres_password.txt`. Operators who configure a non-superuser PostgreSQL user via `secrets/postgres_user.txt` would expose a less privileged credential, but the disclosure of the connection string itself is independent of that choice. The same credential applies to every database managed by that PostgreSQL instance: the central `appointment_booking` database, every per-tenant database (one per tenant), and the postgres administrative database. A `TENANT_ADMIN` of one tenant who can reach `postgres:5432` (directly via internal network, indirectly via any SSRF, RCE, or file-read in the application) can read every other tenant's appointment ciphertexts, key shares, and metadata; read the central user table, including all `GLOBAL_ADMIN` accounts, password hashes, and session records; modify or delete any data in any tenant database; and/or i a superuser-scoped deployment: use PostgreSQL's `pg_read_server_files`, `COPY ... FROM PROGRAM`, and `CREATE EXTENSION` for further escalation inside the database container. This breaks the per-tenant database isolation that is otherwise the primary cross-tenant control in the application. The application code carefully scopes most queries to the calling tenant's database, but those scopings are irrelevant once the attacker holds the credentials that bypass the application entirely. Version 1.0.2 fixes the issue. | 23 Oct |
| CVE-2026-53256 | 8.0 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). | 19 Oct |
| CVE-2026-90092 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case. | 19 Oct |
| CVE-2025-40309 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix UAF on sco_conn_free BUG: KASAN: slab-use-after-free in sco_conn_free net/bluetooth/sco.c:87 [inline] BUG: KASAN: slab-use-after-free in kref_put include/linux/kref.h:65 [inline] BUG: KASAN: slab-use-after-free in sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 Write of size 8 at addr ffff88811cb96b50 by task kworker/u17:4/352 CPU: 1 UID: 0 PID: 352 Comm: kworker/u17:4 Not tainted 6.17.0-rc5-g717368f83676 #4 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci13 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10b/0x170 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x191/0x550 mm/kasan/report.c:482 kasan_report+0xc4/0x100 mm/kasan/report.c:595 sco_conn_free net/bluetooth/sco.c:87 [inline] kref_put include/linux/kref.h:65 [inline] sco_conn_put+0xdd/0x410 net/bluetooth/sco.c:107 sco_connect_cfm+0xb4/0xae0 net/bluetooth/sco.c:1441 hci_connect_cfm include/net/bluetooth/hci_core.h:2082 [inline] hci_conn_failed+0x20a/0x2e0 net/bluetooth/hci_conn.c:1313 hci_conn_unlink+0x55f/0x810 net/bluetooth/hci_conn.c:1121 hci_conn_del+0xb6/0x1110 net/bluetooth/hci_conn.c:1147 hci_abort_conn_sync+0x8c5/0xbb0 net/bluetooth/hci_sync.c:5689 hci_cmd_sync_work+0x281/0x380 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0x77e/0x1040 kernel/workqueue.c:3319 worker_thread+0xbee/0x1200 kernel/workqueue.c:3400 kthread+0x3c7/0x870 kernel/kthread.c:463 ret_from_fork+0x13a/0x1e0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 31370: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4382 [inline] __kmalloc_noprof+0x22f/0x390 mm/slub.c:4394 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xae/0x220 net/core/sock.c:2239 sk_alloc+0x34/0x5a0 net/core/sock.c:2295 bt_sock_alloc+0x3c/0x330 net/bluetooth/af_bluetooth.c:151 sco_sock_alloc net/bluetooth/sco.c:562 [inline] sco_sock_create+0xc0/0x350 net/bluetooth/sco.c:593 bt_sock_create+0x161/0x3b0 net/bluetooth/af_bluetooth.c:135 __sock_create+0x3ad/0x780 net/socket.c:1589 sock_create net/socket.c:1647 [inline] __sys_socket_create net/socket.c:1684 [inline] __sys_socket+0xd5/0x330 net/socket.c:1731 __do_sys_socket net/socket.c:1745 [inline] __se_sys_socket net/socket.c:1743 [inline] __x64_sys_socket+0x7a/0x90 net/socket.c:1743 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc7/0x240 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 31374: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x70 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x3d/0x50 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2428 [inline] slab_free mm/slub.c:4701 [inline] kfree+0x199/0x3b0 mm/slub.c:4900 sk_prot_free net/core/sock.c:2278 [inline] __sk_destruct+0x4aa/0x630 net/core/sock.c:2373 sco_sock_release+0x2ad/0x300 net/bluetooth/sco.c:1333 __sock_release net/socket.c:649 [inline] sock_close+0xb8/0x230 net/socket.c:1439 __fput+0x3d1/0x9e0 fs/file_table.c:468 task_work_run+0x206/0x2a0 kernel/task_work.c:227 get_signal+0x1201/0x1410 kernel/signal.c:2807 arch_do_signal_or_restart+0x34/0x740 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x68/0xc0 kernel/entry/common.c:40 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] s ---truncated--- | 15 Oct |
| CVE-2023-54164 | 8.0 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated--- | 15 Oct |
| CVE-2026-65673 | 7.8 high | 0.00% | microsoft, entra_connect | Incorrect authorization in Microsoft Entra Connect Sync allows an authorized attacker to elevate privileges over a network. | Sat 24 Oct |
| CVE-2026-99012 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable. | Sat 24 Oct |
| CVE-2026-93888 | 7.8 high | 0.00% | no CPE yet | IBM Sterling Connect Direct for Unix 6.4.0.0 through 6.4.0.6 and 6.3.0.0 through 6.3.0.7 apnotify utility is vulnerable to a code injection due to insufficient validation of user input. | 22 Oct |
Download these 660 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.