Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-114490 | 7.8 high | 0.00% | no CPE yet | Incorrect authorization in the COM administration API of Progressive Robot hMailServer 6.3.4 through 6.3.6 allows an account assigned the serveradmin role with a list of domains - a credential an administrator may create meaning to confine it to those domains - to act as the whole-server administrator over COM. Administrator roles are meant to confine such a credential to the domains its list names, and the REST API did not take it for the server administrator, but the COM API's server-administrator check read the administer_server permission as the whole server whatever list the grant carried. So the credential signed in through the Control Panel, or through a script run on the server, as the server administrator of every domain: it could read and change every domain's accounts and mail, rename any domain, map a domain alias onto any, write the server's settings and secrets, and create further server-administrator accounts. The COM API's domain-administrator check, asked with no domain, likewise let an account assigned the domainadmin role with a list of domains that leaves out the account's own domain administer that domain's ordinary accounts over COM. An account holding serveradmin with no list is the server administrator by design and is unaffected, as are the help desk, auditor and custom roles. | Thu 29 Oct |
| CVE-2026-16513 | 7.8 high | 0.00% | zephyrproject, zephyr | The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it. Any user-mode thread that has been granted a struct rtio kernel object can invoke the syscall with an arbitrary address in handle. That is the ordinary way an unprivileged thread uses the RTIO API, for example via sensor_read_async_mempool() or the async ADC helpers, which call rtio_sqe_copy_in_get_handles() internally. The store happens in supervisor mode before any submission-entry validation, so it fires regardless of whether the SQE contents are subsequently rejected. Only builds with CONFIG_USERSPACE and CONFIG_RTIO are affected; without CONFIG_USERSPACE the verifier is not compiled and the caller is already privileged. The write address is fully attacker-chosen and the written value is a pointer into the caller's own RTIO ring, whose contents the caller controls (the following *sqe = sqes[i] copies an attacker-supplied struct rtio_sqe into that slot). This yields a write-what-where primitive placing a pointer to attacker-controlled data at any kernel address, sufficient to corrupt kernel function pointers, thread structures, or memory-domain partition tables, and thus to escalate from user mode to kernel mode, defeating the isolation boundary CONFIG_USERSPACE is meant to enforce. At minimum it is a reliable kernel memory-corruption and crash primitive. The reporter reproduced the write on qemu_x86: a K_USER thread changed a supervisor global from NULL to a live kernel SQE pointer. The fix adds K_SYSCALL_MEMORY_WRITE(handle, sizeof(*handle)) (guarded by the existing optional-NULL semantics) before the loop, so the destination must lie in the calling thread's writable memory domain or the thread is terminated by K_OOPS. The neighbouring verifier z_vrfy_rtio_cqe_get_mempool_buffer(), which checked its buff/buff_len out-parameters only for read although the implementation writes through them, was hardened separately by bea93400138 ("rtio: syscalls: validate output params as writable"); that residual was materially weaker, since a read check still confines the target to the caller's own memory domain. | Tue 27 Oct |
| CVE-2026-18413 | 7.8 high | 0.00% | zephyrproject, zephyr | The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. | Tue 27 Oct |
| CVE-2026-18414 | 7.8 high | 0.00% | zephyrproject, zephyr | The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. | Tue 27 Oct |
| CVE-2026-79979 | 7.8 high | 0.00% | no CPE yet | The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global. A domain's cached translation therefore survived the invalidation. All callers of invalidate_tlb_page() are demand-paging paths. When the eviction algorithm reclaims a frame, page_frame_prepare_locked() in kernel/mmu.c calls arch_mem_page_out(), which marks the kernel leaf invalid, propagates the invalid descriptor into every domain via sync_domains(), and then flushes only ASID 0. do_page_fault() immediately reuses the very same page frame for the incoming mapping through arch_mem_page_in(). A user thread that had already touched the evicted page — a k_mem_partition added with arch_mem_domain_partition_add(), or its own stack mapped by map_thread_stack() — retains a valid EL0 read/write translation to that physical frame under its own ASID. Unprivileged code running in a user thread can drive memory pressure to force eviction and then keep accessing the stale address, obtaining read and write access to whatever the kernel subsequently placed in that frame: supervisor data, another memory domain's partition, or another thread's stack. This defeats the isolation that CONFIG_USERSPACE is meant to enforce, allowing information disclosure and memory corruption up to full compromise of the system. The fix switches the implementation to TLBI VAAE1{IS}, which matches every ASID and both global and non-global entries, so no domain-tagged translation survives a page out, dirty-bit update or access-flag clear. Exploitation requires an arm64 build with both CONFIG_USERSPACE and CONFIG_DEMAND_PAGING enabled, an active backing store, and at least one demand-paged page that is also privately mapped into a user memory domain. The same commit additionally stops globalize_table() from stripping EL0 permission and non-global attributes off domain-private leaves during paging synchronization, which previously caused user threads to lose access to their own partitions and stacks. | Mon 26 Oct |
| CVE-2026-46606 | 7.8 high | 0.00% | no CPE yet | Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances KVM/QEMU monitoring engine (glances/plugins/vms/engines/virsh.py) passes VM domain names, read directly from virsh list --all output, into f-string command templates that are processed by secure_popen(). secure_popen() is explicitly designed to interpret &&, |, and > as shell operators. Because domain names are never sanitised before interpolation, any user with the ability to create or rename a KVM/QEMU virtual machine can execute arbitrary commands as the OS user running Glances — commonly root on hypervisor hosts. This vulnerability is fixed in 4.5.5. | 25 Oct |
| CVE-2026-10682 | 7.8 high | 0.00% | zephyrproject, zephyr | The userspace verifier z_vrfy_log_filter_set() for the log_filter_set syscall in subsys/logging/log_mgmt.c performed a signed comparison against the int16_t src_id parameter: src_id < (int16_t)log_src_cnt_get(domain_id). Any negative value for src_id (e.g. -1) trivially satisfied this check and was forwarded into z_impl_log_filter_set, where it propagated to filter_set() and ultimately to get_dynamic_filter(), which uses source_id as an unsigned index into the linker-section array &TYPE_SECTION_START(log_dynamic)[source_id].filters. After implicit conversion through uint32_t, an int16_t -1 becomes 0xFFFFFFFF, indexing log_dynamic far out of bounds and causing the kernel to perform an OOB read and an OOB read-modify-write (LOG_FILTER_SLOT_GET/SET) against memory adjacent to the log_dynamic section. The written value is a constrained 3-bit log level slot within the targeted 32-bit word, but the target address is attacker-chosen (a small negative offset from log_dynamic) and the write occurs in supervisor mode following a syscall from an unprivileged user thread, providing a kernel memory-corruption / privilege-escalation primitive. The defect is reachable on any build with CONFIG_USERSPACE=y and CONFIG_LOG_RUNTIME_FILTERING=y. Present from Zephyr v3.3.0 through v4.4.1. The fix replaces the signed bound check with an unsigned comparison: (uint32_t)src_id < log_src_cnt_get(domain_id), which correctly rejects negative inputs. | 24 Oct |
| CVE-2026-12234 | 7.8 high | 0.00% | no CPE yet | The userspace syscall verifiers z_vrfy_zsock_sendmsg() and z_vrfy_zsock_recvmsg() in subsys/net/lib/sockets/sockets.c snapshot the caller-supplied struct net_msghdr into a kernel-side copy with k_usermode_from_copy(), but then re-read the still-live user struct for subsequent decisions. The kernel iovec shadow buffer is sized from one read of msg->msg_iovlen, while the population loop is bounded by a second, live read of the same field. Because msg points into ordinary user memory, a cooperating second thread in the same memory domain can inflate msg->msg_iovlen in the window between the sizing read and the loop test (a classic double-fetch / TOCTOU). The population loop then iterates past the number of net_iovec slots actually allocated, writing attacker-influenced iov_base/iov_len values beyond the end of the kernel-heap shadow buffer. The recvmsg verifier has the same defect on both its inbound and result write-back loops. The code is reachable from an unprivileged user thread whenever CONFIG_USERSPACE is enabled and the zsock_sendmsg/zsock_recvmsg syscalls are available. A successful race corrupts kernel-managed heap memory across the user-to-kernel privilege boundary, yielding a local privilege-escalation primitive or, at minimum, a kernel-fault denial of service. The fix copies the header once and derives every size, bound, and gate from the snapshot, copying each iovec entry atomically so its base and length can no longer be raced apart. | 23 Oct |
| CVE-2026-98156 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | 21 Oct |
| CVE-2026-64377 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | 21 Oct |
| CVE-2025-68175 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix streaming cleanup on release The current implementation unconditionally calls mxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This can lead to situations where any release call (like from a simple "v4l2-ctl -l") may release a currently streaming queue when called on such a device. This is reproducible on an i.MX8MP board by streaming from an ISI capture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesink While this stream is running, querying the caps of the same device provokes the error state: v4l2-ctl -l -d /dev/videoX This results in the following trace: [ 155.452152] ------------[ cut here ]------------ [ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6 [ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT [ 157.064369] Hardware name: imx8mp_board_01 (DT) [ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] [ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi] [ 157.087126] sp : ffff800080003ee0 [ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000 [ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50 [ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000 [ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000 [ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000 [ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38 [ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000 [ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000 [ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200 [ 157.161850] Call trace: [ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P) [ 157.170319] __handle_irq_event_percpu+0x58/0x218 [ 157.175029] handle_irq_event+0x54/0xb8 [ 157.178867] handle_fasteoi_irq+0xac/0x248 [ 157.182968] handle_irq_desc+0x48/0x68 [ 157.186723] generic_handle_domain_irq+0x24/0x38 [ 157.191346] gic_handle_irq+0x54/0x120 [ 157.195098] call_on_irq_stack+0x24/0x30 [ 157.199027] do_interrupt_handler+0x88/0x98 [ 157.203212] el0_interrupt+0x44/0xc0 [ 157.206792] __el0_irq_handler_common+0x18/0x28 [ 157.211328] el0t_64_irq_handler+0x10/0x20 [ 157.215429] el0t_64_irq+0x198/0x1a0 [ 157.219009] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the vb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal of the manual cleanup from mxc_isi_video_release(). | 21 Oct |
| CVE-2025-39958 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Make attach succeed when the device was surprise removed When a PCI device is removed with surprise hotplug, there may still be attempts to attach the device to the default domain as part of tear down via (__iommu_release_dma_ownership()), or because the removal happens during probe (__iommu_probe_device()). In both cases zpci_register_ioat() fails with a cc value indicating that the device handle is invalid. This is because the device is no longer part of the instance as far as the hypervisor is concerned. Currently this leads to an error return and s390_iommu_attach_device() fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail() because attaching to the default domain must never fail. With the device fenced by the hypervisor no DMAs to or from memory are possible and the IOMMU translations have no effect. Proceed as if the registration was successful and let the hotplug event handling clean up the device. This is similar to how devices in the error state are handled since commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device is in error state") except that for removal the domain will not be registered later. This approach was also previously discussed at the link. Handle both cases, error state and removal, in a helper which checks if the error needs to be propagated or ignored. Avoid magic number condition codes by using the pre-existing, but never used, defines for PCI load/store condition codes and rename them to reflect that they apply to all PCI instructions. | 21 Oct |
| CVE-2026-97594 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | 21 Oct |
| CVE-2026-80546 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve CCA CPRB length and overflow checks The xcrb_msg_to_type6cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Integer overflow after CEIL4 alignment: Signed int variables could overflow during 4-byte boundary alignment, causing undersized buffer allocations or incorrect bounds checking. 2. Missing minimum size validation: The CPRBX structure is copied from userspace without verifying sufficient buffer length. Undersized buffers cause uninitialized memory access when reading structure fields like cprbx.cprb_len and cprbx.domain. 3. Arithmetic overflow in sum calculations: Adding control block and data block sizes could overflow, bypassing size checks and enabling buffer overflows. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, validating minimum control block size before copying from userspace, and detecting sum calculation overflows. | 21 Oct |
| CVE-2026-80544 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct overlays to access and modify the domain field in the EP11 CPRB payload, creating maintainability and security concerns: 1. Struct overlay approach (pld_hdr) assumes fixed payload structure and doesn't validate the actual ASN.1 encoding. 2. Complex length format detection logic is error-prone and doesn't properly validate bounds at each parsing step. 3. Direct struct member access bypasses proper ASN.1 validation. Fix by replacing struct overlays with explicit ASN.1 parsing that validates each field (payload tag/length, function tag/length/value, optional domain tag/length/value) with proper bounds checking at every step. Add asn1_int_encode() helper function to safely write integer values with correct endianness conversion. This makes the code consistent with the validation pattern introduced with the rework of the xcrb_msg_to_type6_ep11cprb_msgx() function. | 21 Oct |
| CVE-2026-72009 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | 21 Oct |
| CVE-2025-39939 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Fix memory corruption when using identity domain zpci_get_iommu_ctrs() returns counter information to be reported as part of device statistics; these counters are stored as part of the s390_domain. The problem, however, is that the identity domain is not backed by an s390_domain and so the conversion via to_s390_domain() yields a bad address that is zero'd initially and read on-demand later via a sysfs read. These counters aren't necessary for the identity domain; just return NULL in this case. This issue was discovered via KASAN with reports that look like: BUG: KASAN: global-out-of-bounds in zpci_fmb_enable_device when using the identity domain for a device on s390. | 19 Oct |
| CVE-2025-38729 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too. | 19 Oct |
| CVE-2026-31473 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | 19 Oct |
| CVE-2026-98002 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | 19 Oct |
| CVE-2026-90244 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only guarding a corner case and will likely never be contended. iommufd avoids the equivalent problem by having its own callers (iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever reaching the shared list. VFIO type1 can't mirror that since it dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. | 19 Oct |
| CVE-2026-89442 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates the user-supplied socket_id with 'socket_id > topology_max_packages()', but isst_common.sst_inst[] is allocated with topology_max_packages() entries, so the valid index range is [0, topology_max_packages()). The '>' comparison lets socket_id == topology_max_packages() pass and index one entry past the array. In addition, isst_common.sst_inst[socket_id] is NULL for an in-range package that has no bound TPMI SST instance, and the pointer is used without a NULL check. Both the out-of-bounds entry and the NULL pointer are then dereferenced by map_partition_power_domain_id() and the following power_domain_info access. Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching the checks already performed by get_instance(). | 19 Oct |
| CVE-2025-43914 | 7.8 high | 0.00% | dell, data_domain_operating_system | Dell PowerProtect Data Domain BoostFS for Linux Ubuntu systems of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Incorrect Privilege Assignment vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access. | 18 Oct |
| CVE-2025-66431 | 7.8 high | 0.00% | no CPE yet | WebPros Plesk before 18.0.73.5 and 18.0.74 before 18.0.74.2 on Linux allows remote authenticated users to execute arbitrary code as root via domain creation. The attacker needs "Create and manage sites" with "Domains management" and "Subdomains management." | 18 Oct |
| CVE-2026-80709 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this. | 16 Oct |
| CVE-2026-80541 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate GEM_CREATE domain combinations AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK, but did not validate domain combinations. Userspace could combine CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and hit BUG_ON(). Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/ VRAM domains to be specified one at a time. Return -EINVAL for invalid combinations in amdgpu_gem_create_ioctl(). v2: Rename helper from amdgpu_gem_domain_valid() to amdgpu_gem_are_domains_valid() (Christian) (cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080) | 16 Oct |
| CVE-2025-38216 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Restore context entry setup order for aliased devices Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order. | 15 Oct |
| CVE-2025-71162 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra-adma: Fix use-after-free A use-after-free bug exists in the Tegra ADMA driver when audio streams are terminated, particularly during XRUN conditions. The issue occurs when the DMA buffer is freed by tegra_adma_terminate_all() before the vchan completion tasklet finishes accessing it. The race condition follows this sequence: 1. DMA transfer completes, triggering an interrupt that schedules the completion tasklet (tasklet has not executed yet) 2. Audio playback stops, calling tegra_adma_terminate_all() which frees the DMA buffer memory via kfree() 3. The scheduled tasklet finally executes, calling vchan_complete() which attempts to access the already-freed memory Since tasklets can execute at any time after being scheduled, there is no guarantee that the buffer will remain valid when vchan_complete() runs. Fix this by properly synchronizing the virtual channel completion: - Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the descriptors as terminated instead of freeing the descriptor. - Add the callback tegra_adma_synchronize() that calls vchan_synchronize() which kills any pending tasklets and frees any terminated descriptors. Crash logs: [ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0 [ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0 [ 337.427562] Call trace: [ 337.427564] dump_backtrace+0x0/0x320 [ 337.427571] show_stack+0x20/0x30 [ 337.427575] dump_stack_lvl+0x68/0x84 [ 337.427584] print_address_description.constprop.0+0x74/0x2b8 [ 337.427590] kasan_report+0x1f4/0x210 [ 337.427598] __asan_load8+0xa0/0xd0 [ 337.427603] vchan_complete+0x124/0x3b0 [ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0 [ 337.427617] tasklet_action+0x30/0x40 [ 337.427623] __do_softirq+0x1a0/0x5c4 [ 337.427628] irq_exit+0x110/0x140 [ 337.427633] handle_domain_irq+0xa4/0xe0 [ 337.427640] gic_handle_irq+0x64/0x160 [ 337.427644] call_on_irq_stack+0x20/0x4c [ 337.427649] do_interrupt_handler+0x7c/0x90 [ 337.427654] el1_interrupt+0x30/0x80 [ 337.427659] el1h_64_irq_handler+0x18/0x30 [ 337.427663] el1h_64_irq+0x7c/0x80 [ 337.427667] cpuidle_enter_state+0xe4/0x540 [ 337.427674] cpuidle_enter+0x54/0x80 [ 337.427679] do_idle+0x2e0/0x380 [ 337.427685] cpu_startup_entry+0x2c/0x70 [ 337.427690] rest_init+0x114/0x130 [ 337.427695] arch_call_rest_init+0x18/0x24 [ 337.427702] start_kernel+0x380/0x3b4 [ 337.427706] __primary_switched+0xc0/0xc8 | 15 Oct |
| CVE-2026-33655 | 7.7 high | 0.00% | newapi, new_api | New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the default SSRF protection configuration did not apply IP filtering to hostnames; with ApplyIPFilterForDomain disabled by default, URL validation checked domain allow/block rules but did not resolve a hostname and validate the resolved IP address, allowing authenticated users to configure Webhook, Bark, or Gotify notification URLs that point at an internal or metadata IP address. This issue is fixed in version 0.12.0-alpha.1. | 25 Oct |
| CVE-2026-59931 | 7.7 high | 0.00% | no CPE yet | PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. In versions 4.0.0 through 5.8.0, 3.3.0 through 3.10.6, 2.2.0 through 2.4.6, 2.0.0 through 2.1.17, and all releases up to and including 1.30.5, the WEBSERVICE() domain whitelist can be bypassed via an HTTP redirect (SSRF). In Calculation/Web/Service.php, the webService() method validates a URL's host against the whitelist set via Spreadsheet::setDomainWhiteList(), then fetches content with file_get_contents($url, false, $ctx); because PHP's HTTP stream wrapper follows 301/302 redirects automatically (up to 20 hops) and the redirect target is never re-validated, an attacker who can trigger a redirect from a whitelisted domain can reach arbitrary URLs, including internal addresses. An attacker able to upload XLSX files to an application that uses setDomainWhiteList() and getCalculatedValue() can achieve a full-read SSRF, returning up to 32,767 bytes of the response body as a cell's calculated value, which enables exfiltration of cloud metadata (AWS/GCP/Azure credentials via http://169.254.169.254/), access to internal-only services, and internal port scanning (the port is not validated). This issue has been fixed in versions 5.8.1, 3.10.7, 2.4.7, 2.1.18, and 1.30.6. | 23 Oct |
| CVE-2026-86377 | 7.6 high | 0.00% | no CPE yet | Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Out-of-bounds Write vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. | Wed 28 Oct |
| CVE-2026-115863 | 7.6 high | 0.00% | no CPE yet | ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero bytes makes the label walk leave the buffer and read/write '.' past its end in attacker-chosen strides. An on-link attacker can trigger this without authentication via a forged Router Advertisement (O=1) and a forged DHCPv6 REPLY matching xid/CLIENTID with a long DOMAIN_LIST. The impact is unauthenticated on-link crash of connmand (runs as root). This was introduced in bb06c47. | 23 Oct |
| CVE-2026-48545 | 7.6 high | 0.00% | gradio_project, gradio | Gradio before version 6.15.0 contains a cookie injection vulnerability that allows remote attackers to perform cross-Space session fixation by exploiting a shared module-level HTTP client used across all users in the reverse proxy endpoint. Attackers controlling any HF Space can return a parent-domain cookie that the shared client stores and automatically replays into all subsequent proxy requests to other legitimate Spaces, affecting all users of the same Gradio deployment. | 8 Oct |
| CVE-2026-4296 | 7.5 high | 0.00% | github, enterprise_server | An incorrect regular expression vulnerability was identified in GitHub Enterprise Server that allowed an attacker to bypass OAuth redirect URI validation. An attacker with knowledge of a first-party OAuth application's registered callback URL could craft a malicious authorization link that, when clicked by a victim, would redirect the OAuth authorization code to an attacker-controlled domain. This could allow the attacker to gain unauthorized access to the victim's account with the scopes granted to the OAuth application. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.1, 3.19.5, 3.18.8, 3.17.14, 3.16.17, 3.15.21, 3.14.26. This vulnerability was reported via the GitHub Bug Bounty program. | Mon 26 Oct |
| CVE-2026-65644 | 7.5 high | 0.00% | rocket.chat | Rocket.Chat in versions before 8.8.0, 8.7.1, 8.6.2, 8.5.3, 8.4.6, 8.3.8, 8.2.8, 8.1.8, and 7.10.15 has a REST API endpoint POST /api/v1/livechat/visitor that accepts an unauthenticated, unsanitized name field for Livechat visitors. This name is stored raw and later rendered via dangerouslySetInnerHTML in the Omnichannel Queue side panel (InquireSidePanelItem.tsx), injecting a real, clickable HTML link - pointing to any attacker-controlled domain, with arbitrary social-engineering text - into the DOM of any agent viewing the queue. | Mon 26 Oct |
| CVE-2026-12084 | 7.5 high | 0.00% | ibm, devops_deploy | IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. | 25 Oct |
| CVE-2026-53482 | 7.5 high | 0.00% | dell, data_domain_operating_system | Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. | 25 Oct |
| CVE-2026-56458 | 7.5 high | 0.00% | hcltechsw, hcl_devops_deploy | HCL DevOps Deploy uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains. | 25 Oct |
| CVE-2026-16422 | 7.5 high | 0.00% | google, chrome | Insufficient validation of untrusted input in Certificate in Google Chrome on Linux prior to 150.0.7871.182 allowed an attacker in a privileged network position to perform domain spoofing via malicious network traffic. (Chromium security severity: High) | 24 Oct |
| CVE-2026-71234 | 7.5 high | 0.00% | no CPE yet | Documize Community's attachment download route (domain/attachment/endpoint.go, Download function, registered via AddPublic with no auth middleware) accepts a query parameter and grants access whenever the parameter is simply non-empty (len(secureToken) > 0), without comparing it to any server-stored value. | 24 Oct |
| CVE-2026-44690 | 7.5 high | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, insufficient validation of the RRSIG.Labels field combined with premature cache writes during RFC 8198 aggressive NSEC processing leads to cache poisoning that permits a malicious actor controlling a single delegated zone to poison arbitrary sibling zones under NSEC-signed parent domains. A malicious actor with one registered domain under an NSEC-signed TLD can serve malicious insecure DNS responses for unrelated sibling domains (sharing the same parent zone). Arbitrary delegations that do not exist under the parent domain and are covered by the parent's NSEC chain can be brought into insecure existence by fraudulent wildcard DS records (less labels than expected, unknown algorithm) from the malicious sibling domain. This allows the malicious actor to inject insecure wildcard records for those delegations. | 24 Oct |
| CVE-2026-55973 | 7.5 high | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.23.0 up to and including 1.25.1, when 'dns-error-reporting: yes' is set, the EDNS Report-Channel option (code 18) from the last upstream response is read and uses the option's length as the length of the agent domain. When a domain name check is performed on the agent domain, the returned lenght is not used and if the agent domain is followed by garbage, those bytes are moved onto the tail of the synthetic '_er.' report query name. That query name is later used in the iterator via a subquery to send out the DNS Error Report and when Unbound tries to walk that query name during 'find_closest_of_type()', it strips labels using the query name length rather than stopping at the embedded root, walks one byte past it, and feeds the first garbage byte to 'dname_query_hash()' as a label length writing over the stack variable 'labuf'. One ordinary upstream response from a delegated zone the attacker controls is sufficient to terminate the daemon. | 24 Oct |
| CVE-2026-106579 | 7.5 high | 0.00% | imagemagick | ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31 and 6.9.13-56, a crafted image can bypass an ImageMagick security policy that uses coder as its domain, potentially allowing data prohibited by the policy to be read. This issue is fixed in versions 7.1.2-31 and 6.9.13-56. | 21 Oct |
| CVE-2026-107567 | 7.5 high | 0.00% | no CPE yet | Use of a less trusted source in the DKIM signing of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write signed with the DKIM key of a domain the server hosts, so that it passes DKIM and DMARC for that domain at other receivers. With DKIM signing enabled for a hosted domain, the server signed every message on its first delivery pass as the domain named in its From header, before local delivery, whatever the message's origin and without checking that its sender had authenticated. A sender anywhere could therefore send the server, as ordinary inbound mail, a message whose From is any address at such a domain, and the server signed it with that domain's key. Every copy the server then sent on to an address outside carried a valid signature aligned with the forged From, whatever the domain's DMARC policy: an account's forward, a mail rule's forward or copy, a Sieve redirect, an alias or distribution list with an outside member, the mirror copy, a managed-list or journal copy, or a message released from quarantine. A signed copy can also be re-sent to other recipients while the domain's key is unchanged. Exploitation needs DKIM signing to be enabled for the hosted domain (it is off until configured) and, for the forgery to leave the server, a forward, alias, list or rule that carries the domain's mail to an outside address. The signer likewise signed a message submitted over authenticated SMTP as whatever hosted domain its From header named, a header authenticated SMTP does not hold to the submitting account, so that an account of one hosted domain could have mail written in the name of another hosted domain signed with that domain's key; this mattered where the server holds signed-in senders to their own envelope addresses (SmtpAuthenticatedSenderCheck, off by default), as the signature was then the remaining way for such mail to pass the other domain's DMARC policy. | 20 Oct |
| CVE-2026-102699 | 7.5 high | 0.00% | no CPE yet | [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] 1) XSA-437 (CVE-2023-34321) addressed issues with overflows in calculations involved in guests flushing caches through GNTTABOP_cache_flush. Unfortunately the fix there introduced a calculation which may underflow, resulting in a loop which would - at least on 64-bit Arm - take excessively long, and which would likely eventually crash the hypervisor. This is CVE-2026-102699. 2) GNTTABOP_cache_flush may be issued on memory mapped from another domain using the grant table interface. However there was no restriction to disallow the use of invalidate-without-clean against read-only grant mappings, which may corrupt the granted memory. This is CVE-2026-102702. | 20 Oct |
| CVE-2026-102702 | 7.5 high | 0.00% | no CPE yet | [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] 1) XSA-437 (CVE-2023-34321) addressed issues with overflows in calculations involved in guests flushing caches through GNTTABOP_cache_flush. Unfortunately the fix there introduced a calculation which may underflow, resulting in a loop which would - at least on 64-bit Arm - take excessively long, and which would likely eventually crash the hypervisor. This is CVE-2026-102699. 2) GNTTABOP_cache_flush may be issued on memory mapped from another domain using the grant table interface. However there was no restriction to disallow the use of invalidate-without-clean against read-only grant mappings, which may corrupt the granted memory. This is CVE-2026-102702. | 20 Oct |
| CVE-2026-64374 | 7.5 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. | 19 Oct |
| CVE-2025-58144 | 7.5 high | 0.00% | xen | [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145. | 19 Oct |
| CVE-2025-58145 | 7.5 high | 0.00% | xen | [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145. | 19 Oct |
| CVE-2025-58149 | 7.5 high | 0.00% | xen | When passing through PCI devices, the detach logic in libxl won't remove access permissions to any 64bit memory BARs the device might have. As a result a domain can still have access any 64bit memory BAR when such device is no longer assigned to the domain. For PV domains the permission leak allows the domain itself to map the memory in the page-tables. For HVM it would require a compromised device model or stubdomain to map the leaked memory into the HVM domain p2m. | 19 Oct |
Download these 646 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.