Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-52927 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix OOB read in compat_mtw_from_user Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu. | 19 Oct |
| CVE-2026-43116 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock. | 19 Oct |
| CVE-2026-43060 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | 19 Oct |
| CVE-2026-46117 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | 19 Oct |
| CVE-2026-23391 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed. | 19 Oct |
| CVE-2026-23271 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: perf: Fix __perf_event_overflow() vs perf_remove_from_context() race Make sure that __perf_event_overflow() runs with IRQs disabled for all possible callchains. Specifically the software events can end up running it with only preemption disabled. This opens up a race vs perf_event_exit_event() and friends that will go and free various things the overflow path expects to be present, like the BPF program. | 19 Oct |
| CVE-2025-71082 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: revert use of devm_kzalloc in btusb This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly. | 19 Oct |
| CVE-2025-71078 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and we evict an entry from * the preload cache with * preload_age(). We still * keep HW SLB and preload * cache in sync, that is * because all HW SLB entries * anyways gets evicted in * switch_slb during SLBIA. * We then only add those * entries back in HW SLB, * which are currently * present in preload_cache * (after eviction). */ load_elf_binary continues... setup_new_exec() slb_setup_new_exec() sched_switch event sched_migrate_task migrates process P to cpu-0 context_switch from swapper/0 to Process P switch_mm_irqs_off() /* * Since both prev and next mm struct are same we don't call * switch_mmu_context(). This will cause the HW SLB and SW preload * cache to go out of sync in preload_new_slb_context. Because there * was an SLB entry which was evicted from both HW and preload cache * on cpu-1. Now later in preload_new_slb_context(), when we will try * to add the same preload entry again, we will add this to the SW * preload cache and then will add it to the HW SLB. Since on cpu-0 * this entry was never invalidated, hence adding this entry to the HW * SLB will cause a SLB multi-hit error. */ load_elf_binary cont ---truncated--- | 19 Oct |
| CVE-2026-89646 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix leaked inode reference on writeback abort at umount ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and attaches the snap_context to folio->private. That claim is released only by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from writepages_finish(). In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which happens during umount -- the request is aborted before submission: the already-collected folios are only redirtied and unlocked, so writepages_finish() never runs and the claim is leaked. redirty_page_for_writepage() -> folio_redirty_for_writepage() -> filemap_dirty_folio() sets PG_dirty directly and does not go through ->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it. Because every subsequent writeback also fails the osd_stopping_blocker, i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the inode cannot be evicted: VFS: Busy inodes after unmount of ceph kernel BUG at fs/super.c:650! Release the orphaned claim in the abort path before redirtying, via ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop the snap_context reference -- i.e. do what writepages_finish() would have done for these never-submitted folios. Only the locked_pages entries are undone; folios still in the fbatch were never dirty-cleared by this call (folio_clear_dirty_for_io() is the ownership-transfer point, and a successful move NULLs the fbatch slot), so they hold no claim this call owns. | 19 Oct |
| CVE-2026-89594 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI driver uses a synthetic HSI controller device allocated via hsi_alloc_controller(), which does not go through the normal OF/platform device initialization path. As a result, the embedded struct device does not have a DMA mask initialized by default. After recent DMA API hardening changes, dma_map_sg() and related helpers now require a valid dma_mask to be present, otherwise the driver may crash or trigger warnings when attempting DMA mapping operations. Fix this by explicitly initializing the DMA mask for the SSI controller device and setting a 32-bit DMA mask, which matches the hardware capabilities. | 19 Oct |
| CVE-2026-80961 | 7.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate kset key_num and intra-segment bounds Two more fields decoded from the cache device go unbounded. The kset key_num drives cache_kset_crc() and the replay loop in cache_replay(), the writeback worker and the GC worker, but only the magic and a fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare. A key's intra-segment offset and length in cache_key_decode() are taken verbatim, so a key running past its segment is replayed into the cache tree and the data CRC check and every later read hit then copy adjacent persistent memory into the caller's bio -- an out-of-bounds read that leaks to user space. Both fields are controlled by whoever supplies the cache device (CAP_SYS_ADMIN); the CRC seed is public. Add kset_onmedia_valid() to bound key_num before any kset read, and reject a key whose offset plus length, computed in 64 bits, exceeds the segment data_size. Valid metadata is unaffected. | 19 Oct |
| CVE-2025-38584 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: padata: Fix pd UAF once and for all There is a race condition/UAF in padata_reorder that goes back to the initial commit. A reference count is taken at the start of the process in padata_do_parallel, and released at the end in padata_serial_worker. This reference count is (and only is) required for padata_replace to function correctly. If padata_replace is never called then there is no issue. In the function padata_reorder which serves as the core of padata, as soon as padata is added to queue->serial.list, and the associated spin lock released, that padata may be processed and the reference count on pd would go away. Fix this by getting the next padata before the squeue->serial lock is released. In order to make this possible, simplify padata_reorder by only calling it once the next padata arrives. | 15 Oct |
| CVE-2025-38209 | 7.8 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set(). | 15 Oct |
| CVE-2026-94447 | 7.8 high | 0.00% | no CPE yet | Previously, a user operating inside of a malicious Go project that defines a bogus golang.org/toolchain go.sum entry and operates a malicious GOMODPROXY the user chooses to use can bypass the intended checksum. We now ensure that golang.org/toolchain always goes to the network for the canonical checksum. | 15 Oct |
| CVE-2026-94444 | 7.8 high | 0.00% | no CPE yet | Previously, a user operating inside of a malicious Go project that defines a bogus golang.org/fips140 and operates a malicious GOMODPROXY the user chooses to connect to can serve an arbitrary module in its place. We now unpack the trusted ziphash for the bundled golang.org/fips140 module and construct its entry in the GOMODCACHE such that it can be verified by the toolchain. | 15 Oct |
| CVE-2024-26895 | 7.8 high | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/[email protected]/ | 15 Oct |
| CVE-2026-119027 | 7.7 high | 0.00% | oapi-codegen | oapi-codegen 2.5.0 before 2.8.1 contains a code injection vulnerability that allows attackers to inject Go code by supplying a crafted servers[].x-go-name value emitted unescaped by the server-urls template. Attackers who control an OpenAPI document can define an injected func init() that executes when the victim builds and imports the generated package. | Thu 29 Oct |
| CVE-2026-40188 | 7.7 high | 0.00% | goshs | goshs is a SimpleHTTPServer written in Go. From 1.0.7 to before 2.0.0-beta.4, the SFTP command rename sanitizes only the source path and not the destination, so it is possible to write outside of the root directory of the SFTP. This vulnerability is fixed in 2.0.0-beta.4. | Mon 26 Oct |
| CVE-2026-40885 | 7.7 high | 0.00% | goshs | goshs is a SimpleHTTPServer written in Go. From 2.0.0-beta.4 to 2.0.0-beta.5, goshs leaks file-based ACL credentials through its public collaborator feed when the server is deployed without global basic auth. Requests to .goshs-protected folders are logged before authorization is enforced, and the collaborator websocket broadcasts raw request headers, including Authorization. An unauthenticated observer can capture a victim's folder-specific basic-auth header and replay it to read, upload, overwrite, and delete files inside the protected subtree. This vulnerability is fixed in 2.0.0-beta.6. | Mon 26 Oct |
| CVE-2026-59832 | 7.7 high | 0.00% | no CPE yet | SiYuan is an open-source personal knowledge management system. Prior to 3.7.1, the /snippets/*filepath route handler serveSnippets in kernel/server/serve.go joins a single-decoded request path with the snippets directory without subpath containment or sensitive-path checks, allowing an authenticated request such as /snippets/%2e%2e/%2e%2e/conf/conf.json to read workspace secrets and the document database. This issue is fixed in versions 3.7.1. | Sun 25 Oct |
| CVE-2026-89466 | 7.7 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: terminate the strings from firmware The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and leaves the destination without a terminator. Those destinations are model_number, serial_number and oem_info, each BATTMGR_STRING_LEN and declared next to each other. They go out to user space as val->strval, which power_supply_format_property() prints with "%s", so a firmware string that fills the whole field makes that read run into the following members. Use strscpy() so the copy always terminates, the way the SM8350 path already does for the same field. | 19 Oct |
| CVE-2026-53999 | 7.7 high | 0.00% | no CPE yet | Radius is a cloud-native, portable application platform that makes app development easier for teams building cloud-native apps. Prior to 0.58.0, the Kubernetes controller deserializes the user-controlled radapp.io/status annotation on a Deployment and uses its container resource identifier for deletion without confirming ownership by that Deployment. An attacker with permission to modify Deployment annotations and knowledge of a target Radius resource ID can forge radapp.io/status and set radapp.io/enabled to false, causing reconciliation to enter the privileged deletion path for another tenant's Radius-managed container resource. In a multi-tenant installation this confused-deputy condition can delete another team's recoverable container resource and disrupt service; in a single-tenant installation the impact is limited to self denial of service. The multi-tenant Radius controller reads the annotations in pkg/controller/reconciler/annotations.go and reaches the privileged delete in pkg/controller/reconciler/deployment_reconciler.go. The issue does not disclose data, grant privileges, or provide persistence. This issue is fixed in version 0.58.0. | 16 Oct |
| CVE-2026-118650 | 7.5 high | 0.00% | no CPE yet | Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, a globally mounted middleware.Static instance can interpret an encoded request path differently from Echo's router because the router matches the still-encoded path while the static handler uses the decoded URL.Path. The advisory demonstrates an encoded slash resolving to a file under the static root through the global static middleware, but the source is internally inconsistent about whether a route or group guard protects the corresponding literal path in that global-mount configuration. This issue is fixed in 4.16.0 and 5.4.0. | Wed 28 Oct |
| CVE-2026-116587 | 7.5 high | 0.00% | no CPE yet | Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.6, go-jose parses attacker-controlled RSA modulus and prime values from JWKs without enforcing size and consistency bounds before passing them to crypto/rsa.PrivateKey.Validate. On Go 1.24 and later, crafted large or degenerate RSA parameters can make that validation consume cubic CPU time, allowing remote denial of service in applications that parse JWKs from untrusted sources. This issue is fixed in version 4.1.6. | Tue 27 Oct |
| CVE-2026-45741 | 7.5 high | 0.00% | no CPE yet | Gotenberg is a Docker-powered stateless API for PDF files. In 8.32.0 and earlier, the IsPublicIP function in pkg/gotenberg/outbound.go does not reject the 2002::/16 6to4 prefix, the 64:ff9b::/96 and 64:ff9b:1::/48 NAT64 prefixes, the fec0::/10 deprecated site-local prefix, Teredo, and other transition prefixes that can embed or route to non-public IPv4 destinations. The addr.Unmap operation only handles IPv4-mapped IPv6 addresses, so a crafted DNS AAAA record can cause the outbound HTTP client to treat an address wrapping an internal destination such as 169.254.169.254 as public. An unauthenticated attacker can use a conversion route with WithDenyPrivateIPs enabled to reach cloud metadata services, and the Chromium URL conversion route can return the internal response as a PDF, potentially exposing cloud credentials. Exploitation requires a deployment whose host routes the relevant IPv6 prefix, such as a dual-stack or NAT64-enabled environment. This issue is fixed in version 8.33.0. | Tue 27 Oct |
| CVE-2026-113729 | 7.5 high | 0.00% | no CPE yet | Moov signedxml is a pure Go library for processing signed XML documents. Prior to 1.4.1, ExclusiveCanonicalization in exclusivecanonicalization.go copies the complete accumulated namespace map at every nested element before reference digest or signature checks. Attacker-controlled XML containing deeply nested elements with many unused namespace declarations causes quadratic allocation growth with depth and linear growth with prefixes per level, allowing a comparatively small document to consume multiple gigabytes of memory and terminate the process. The condition is reachable through ValidateReferences without a valid signature, matching certificate, or prior authentication, and it does not bypass signature verification. This issue is fixed in version 1.4.1. | Tue 27 Oct |
| CVE-2026-35597 | 7.5 high | 0.00% | vikunja | Vikunja is an open-source self-hosted task management platform. Prior to 2.3.0, the TOTP failed-attempt lockout mechanism is non-functional due to a database transaction handling bug. When a TOTP validation fails, the login handler in pkg/routes/api/v1/login.go calls HandleFailedTOTPAuth and then unconditionally rolls back. HandleFailedTOTPAuth in pkg/user/totp.go uses an in-memory counter (key-value store) to track failed attempts. When the counter reaches 10, it calls user.SetStatus(s, StatusAccountLocked) on the same database session s. Because the login handler always rolls back after a TOTP failure, the StatusAccountLocked write is undone. The in-memory counter correctly increments past 10, so the lockout code executes on every subsequent attempt, but the database write is rolled back every time. This allows unlimited brute-force attempts against TOTP codes. This vulnerability is fixed in 2.3.0. | Mon 26 Oct |
| CVE-2026-42285 | 7.5 high | 0.00% | osrg, gobgp | GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. In version 4.4.0, an unauthenticated remote BGP peer can trigger a fatal panic in GoBGP by sending a specially crafted BGP UPDATE message. When the server receives a message with inconsistent attribute lengths, it improperly handles the internal state transition to a "withdraw" action, leading to a nil pointer dereference in the AdjRib.Update function. This causes the entire GoBGP process to crash, resulting in a complete loss of service availability. This issue has been patched in version 4.5.0. | Mon 26 Oct |
| CVE-2026-40890 | 7.5 high | 0.00% | gomarkdown, markdown | The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Processing a malformed input containing a < character that is not followed by a > character anywhere in the remaining text with a SmartypantsRenderer will lead to Out of Bounds read or a panic. This vulnerability is fixed with commit 759bbc3e32073c3bc4e25969c132fc520eda2778. | Mon 26 Oct |
| CVE-2026-102941 | 7.5 high | 0.00% | no CPE yet | The package github.com/gomarkdown/markdown is a Go library for parsing Markdown text and rendering as HTML. Prior to 0.0.0-20260724235538-61af6e1e6971, parser.IsSafeURL in parser/parser.go slices url[:nPath] before the len(url) >= nPath guard. A short destination causes a slice-bounds panic when the loop reaches a relative-path prefix for which len(url) < nPath and cap(url) < nPath. The one-byte destination / is an explicit non-panic counterexample because it matches the first valid path and returns before a longer prefix is sliced. Demonstrated panic cases include empty, ., and .. destinations under those conditions. The panic is reachable when markdown.ToHTML renders untrusted Markdown with html.Safelink enabled, including an empty link destination, and is also reachable by callers that pass a short attacker-controlled URL directly to the exported parser.IsSafeURL function. An uncaught panic can terminate the calling process and cause denial of service. This issue is fixed in 0.0.0-20260724235538-61af6e1e6971. | Mon 26 Oct |
| CVE-2026-45047 | 7.5 high | 0.00% | no CPE yet | bird-lg-go is a BIRD looking glass in Go. Prior to 1.4.5, the apiHandler (and similarly webHandlerTelegramBot) processes user-provided JSON payloads by directly using json.NewDecoder(r.Body).Decode(&request) without restricting the maximum read size. An unauthenticated remote attacker can stream an extremely large, endless JSON payload (e.g., several Gigabytes of padding) over a single TCP connection. Because Go's JSON decoder attempts to allocate memory for the entire parsed structure, this rapidly exhausts the host's physical RAM or container limits, leading to an unrecoverable fatal error: runtime: out of memory. This vulnerability is fixed in 1.4.5. | Mon 26 Oct |
| CVE-2026-45090 | 7.5 high | 0.00% | no CPE yet | Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, ParameterAnalysis in pkg/scanning/parameterAnalysis.go runs two sequential worker stages that both write to the same results channel. The channel is correctly closed after the first stage completes (close(results) at line 438), but the second stage — which processes POST-body parameters (dp) — is then launched with the same already-closed channel as its output. When a scanned parameter is reflected, processParams executes results <- paramResult on the closed channel, triggering a Go runtime panic that crashes the entire dalfox process. In server mode, the crash is remotely triggerable by any unauthenticated caller who can reach the REST API, because the default configuration has no API key and the second stage activates whenever options.Data != "" (i.e., the attacker supplies the data field) and the target reflects at least one parameter. This vulnerability is fixed in 2.13.0. | Mon 26 Oct |
| CVE-2026-49834 | 7.5 high | 0.00% | sigstore, sigstore-go | sigstore-go is a Go library for Sigstore signing and verification. Prior to 1.2.0, a verifier configured with WithTransparencyLog(N>1) or WithSignedCertificateTimestamps(N>1) counts verified witnesses per entry or per validation path rather than per log authority, allowing a single compromised transparency log or CT log to satisfy multi-log threshold requirements and defeat the multi-log policy. This issue is fixed in version 1.2.0. | 24 Oct |
| CVE-2026-50151 | 7.5 high | 0.00% | linuxfoundation, oras | oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, registry/remote/repository.go in blobStore.completePushAfterInitialPost follows a registry-controlled Location header during monolithic blob upload and reuses the Authorization header from the initial POST request for the subsequent PUT request, allowing a malicious registry to return a cross-host Location and receive the caller's credentials at an attacker-controlled endpoint. This issue is fixed in version 2.6.1. | 24 Oct |
| CVE-2026-52878 | 7.5 high | 0.00% | no CPE yet | Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. | 24 Oct |
| CVE-2026-52879 | 7.5 high | 0.00% | no CPE yet | Klever-Go is the Go implementation of the Klever blockchain protocol. In versions 1.7.14 through 1.7.17, the direct-message ingress handler spawns a new goroutine for every incoming direct message before the processor-level antiflood layer makes any admission decision, with no semaphore, throttler, or bound on the number of concurrent in-flight spawns. Because the antiflood check runs inside the spawned goroutine rather than before it, a single connected peer can open a direct-send stream and send a stream of well-formed messages to force unbounded goroutine creation, where each goroutine allocates its own stack and holds a message reference until processing completes, adding scheduler and garbage-collection pressure faster than the runtime can drain it. This lets one peer degrade the node's availability and its ability to process legitimate traffic, resulting in a remotely triggerable denial of service. The issue is fixed in 1.7.18. | 24 Oct |
| CVE-2026-52880 | 7.5 high | 0.00% | no CPE yet | Klever-Go is the Go implementation of the Klever blockchain protocol. Versions from 1.7.14 through 1.7.17 are vulnerable to a remotely triggerable denial of service. Both REST APIs are started with the Gin Engine.Run convenience method, which serves requests through Go's default HTTP server with no ReadHeaderTimeout, ReadTimeout, or MaxHeaderBytes configured. As a result, incoming connections that never complete their request headers are held open indefinitely. When a REST listener is reachable beyond localhost through the documented all-interface bind or a Docker port-publish deployment, a single unauthenticated client can open many slow-header connections and hold them open until server file descriptors are exhausted, preventing the API from accepting new connections. This renders the REST API unavailable to legitimate clients. This issue is fixed in version 1.7.18. | 24 Oct |
| CVE-2026-71234 | 7.5 high | 0.00% | no CPE yet | Documize Community's attachment download route (domain/attachment/endpoint.go, Download function, registered via AddPublic with no auth middleware) accepts a query parameter and grants access whenever the parameter is simply non-empty (len(secureToken) > 0), without comparing it to any server-stored value. | 24 Oct |
| CVE-2026-99030 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset(). | 24 Oct |
| CVE-2026-54719 | 7.5 high | 0.00% | no CPE yet | goshs is a feature-rich single-binary file server for red teamers and developers. Prior to 2.1.1, the httpserver/updown.go bulkDownload handler for ?bulk&file= ZIP downloads did not call findEffectiveACL or applyCustomAuth, allowing unauthenticated reads of files protected only by .goshs folder ACLs and block lists. This issue is fixed in version 2.1.1. This vulnerability exists due to an incomplete fix for CVE-2026-40189. | 23 Oct |
| CVE-2026-47249 | 7.5 high | 0.00% | no CPE yet | Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.18, the P2P resolver request handling logic is vulnerable to hash-array amplification. A connected peer can send a compressed RequestDataType_HashArrayType direct request that is only 442 bytes on the wire but expands into 200,000 decoded hash entries inside the resolver path. The resolver's antiflood logic counts only a single logical message and the compressed wire size, and while Batch.Decompress() caps the decompressed byte size, it never limits the number of decoded repeated-field items. As a result, both TxResolver and TrieNodeResolver preallocate and iterate over the entire unchecked set of decoded hashes, causing remote memory and CPU amplification against any node that accepts P2P peer connections. This issue is fixed in version 1.7.18. | 23 Oct |
| CVE-2026-48702 | 7.5 high | 0.00% | no CPE yet | Rekor is a software supply chain transparency log. Starting in version 0.3.0 and prior to version 1.5.2, the `Package.Unmarshal()` function in `pkg/types/alpine/apk.go` decompresses the signature and control gzip members of an APK file into in-memory buffers without bounding the total decompressed size. The existing `max_apk_metadata_size` check (default 1MB) is only applied to individual tar entry header sizes after decompression completes, so it does not prevent a decompression bomb from consuming unbounded heap memory. An attacker can craft a gzip stream that compresses at a ~1000:1 ratio (e.g., 2MB compressed zeros → 2GB decompressed). When submitted as spec.package.content in an Alpine `ProposedEntry`, the server decompresses the full payload into memory during request processing, triggering a fatal Go runtime out-of-memory error or OS OOM-kill that cannot be caught by the server's recover() middleware. This is reachable via two unauthenticated endpoints, `POST /api/v1/log/entries (createLogEntry)` and `POST /api/v1/log/entries/retrieve (searchLogQuery)`. Both invoke `V001Entry.Canonicalize()` → `fetchExternalEntities()` → `apk.Unmarshal(packageData)`, which performs the unbounded decompression. Version 1.5.2 patches the issue. There is no effective workaround. Setting `max_request_body_size` reduces but does not eliminate exposure due to the ~1000:1 compression ratio (a 1MB body limit still allows ~1GB heap allocation). Setting `max_apk_metadata_size` has no effect on this vulnerability since the check is applied after decompression. | 23 Oct |
| CVE-2026-55784 | 7.5 high | 0.00% | no CPE yet | free5GC is an open-source implementation of the 5G core network. In version 1.4.4 and earlier, the AUSF component stores per-subscriber authentication state in a global sync.Map named AUSFContext.UePool in internal/context/context.go, keyed only by SUPI. Every request handled by internal/sbi/processor/ue_authentication.go creates an AusfUeContext, and AddAusfUeContextToPool executes ausfContext.UePool.Store(ausfUeContext.Supi, ausfUeContext), unconditionally replacing the active context for that SUPI. An attacker with access to the AUSF SBI/N12 interface can send concurrent POST /nausf-auth/v1/ue-authentications requests for the same target SUPI, causing all attempts to share one logical authentication context URL while K_aut, XRES, and EapID are repeatedly overwritten. A valid EAP-AKA' response for an earlier challenge is then checked against the latest context, causing AT_MAC verification to fail and denying authentication to the selected subscriber while the request flood continues. No fixed version is available as of this review. | 20 Oct |
| CVE-2025-59530 | 7.5 high | 0.00% | no CPE yet | quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. | 19 Oct |
| CVE-2026-97595 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mac802154: fix use-after-free of sdata via queued RX frames The RX softirq producer ieee802154_subif_frame() queues received beacon and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and schedules a process-context worker, storing a raw mac_pkt->sdata (and skb->dev == sdata->dev) with neither a reference nor any locking: - the lists have no lock: the softirq producer list_add_tail()s while the mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt the list; - the workers dereference the interface after it may have been freed. mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences skb->dev (== sdata->dev). Removing an interface frees its sdata (netdev_priv) while a queued frame still points at it, so a later worker run is a use-after-free. Reproduced under KASAN by flooding a victim interface with MAC command frames and removing it (the beacon path is the same class via skb->dev): BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31 Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154] Call Trace: mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] process_one_work+0x611/0xe80 worker_thread+0x52e/0xdc0 kthread+0x30c/0x630 ret_from_fork+0x2fd/0x3e0 Fix both lists together: - add local->rx_lock and take it around every list access: the softirq producer (plain spin_lock, softirq context) and the workers and flush (spin_lock_bh, process context); - pin the interface for the lifetime of a queued frame with netdev_hold()/netdev_put(), so the worker can safely dereference sdata / skb->dev even while the interface is being removed; - dequeue under the lock at the head and loop-drain the whole list in the workers (they previously processed one frame per run and relied on a later enqueue to drain the rest); - drop not-yet-started frames of an interface before it is unregistered, from ieee802154_if_remove() (after the RCU grace period) and from the ieee802154_remove_interfaces() loop -- the latter is the whole-phy teardown path, which does not go through ieee802154_if_remove(). An in-flight worker that already dequeued a frame keeps its own netdev reference; unregister_netdevice() then waits it out in netdev_run_todo(), which runs at rtnl_unlock() (rtnl released) and after the interface has been closed, so it does not pin rtnl. A worker blocked in an association TX only delays that one interface's unregister (the usual "waiting for %s to become free"), it does not hold rtnl. netdev_hold() is used for this reason instead of a cancel_work_sync() under rtnl, which would block on the worker's unbounded MLME TX wait via ieee802154_sync_queue(). The mac-command worker additionally skips processing for a stopped interface (ieee802154_sdata_running()), avoiding a needless association response during teardown. | 19 Oct |
| CVE-2026-89481 | 7.5 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix host memory disclosure on R2T for a read command nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write. | 19 Oct |
| CVE-2025-61729 | 7.5 high | 0.00% | golang, go | Within HostnameError.Error(), when constructing an error string, there is no limit to the number of hosts that will be printed out. Furthermore, the error string is constructed by repeated string concatenation, leading to quadratic runtime. Therefore, a certificate provided by a malicious actor can result in excessive resource consumption. | 18 Oct |
| CVE-2026-107840 | 7.5 high | 0.00% | no CPE yet | yopass is a service for securely sharing secrets, passwords, and files. Prior to version 14.7.0, the Prometheus metrics middleware in pkg/server/server.go uses the attacker-controlled r.Method value directly as the method label for yopass_http_requests_total and yopass_http_request_duration_seconds. Because the catch-all route accepts arbitrary HTTP method tokens, an unauthenticated remote attacker can submit many unique methods and create metric series that the Prometheus registry never evicts. The resulting monotonic memory growth can OOM-kill the process, while the expanding registry also degrades /metrics scrape latency and can blind monitoring. This issue is fixed in version 14.7.0. | 16 Oct |
| CVE-2026-107826 | 7.5 high | 0.00% | no CPE yet | OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, readJSON in internal/bodyprocessors/json.go can stop its bounded flattening walk after reaching SecArgumentsLimit or the byte budget and then call gjson.Valid on the complete raw body. An unauthenticated attacker can submit shallow values followed by an extremely deeply nested JSON tail that was not visited by the bounded walk, causing gjson.Valid to recurse without a depth bound and terminate the hosting process with an unrecoverable fatal stack overflow. The ProcessRequest and ProcessResponse JSON paths share the affected readJSON validation flow, and the payload can remain within recommended body-size and argument-count limits. This issue is fixed in version 3.8.1. | 16 Oct |
| CVE-2026-100354 | 7.5 high | 0.00% | no CPE yet | kin-openapi is a Go project for handling OpenAPI files. Prior to 0.149.0, runtime request, response, and direct schema validation lacks cycle detection when an allOf, anyOf, or oneOf chain refers back to an ancestor schema, even though loading and document validation accept the circular reference. A request or response that reaches the affected schema causes unbounded recursion in Schema.visitJSON or openapi3filter.decodeValue and exhausts the Go goroutine stack. The resulting fatal stack overflow cannot be caught with recover and terminates the entire process, including unrelated requests. This issue is fixed in version 0.149.0. | 15 Oct |
Download these 645 as CSV · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.