Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-67587 | 8.8 high | 1.0% | apache, airflow | Apache Airflow's Task SDK rebuilt a `Callback` object from serialized data by re-running its constructor, which imports the module named by the stored callback path. Because `SyncCallback` is itself an Airflow class it passes the default `allowed_deserialization_classes` allow-list, so tightening that setting does not help. A Dag author — who controls a task instance's `next_kwargs` through the task execution API — can therefore cause an arbitrary module to be imported inside the scheduler process, when the scheduler's `awaiting_input` timeout sweep deserializes that value. No non-default configuration is required; the sweep runs unconditionally. Versions before 3.3.0 are not affected: the class existed, but the scheduler sweep that reaches it did not. This is a separate code path from CVE-2026-58076 and CVE-2026-67260, which cover different gadgets reaching deserialization — applying either of those fixes does not address this one. Users are advised to upgrade to apache-airflow 3.3.1 or later. | Sat 24 Oct |
| CVE-2023-28162 | 8.8 high | 1.0% | mozilla, firefox, firefox_esr, thunderbird | While implementing AudioWorklets, some code may have casted one type to another, invalid, dynamic type. This could have led to a potentially exploitable crash. This vulnerability affects Firefox < 111, Firefox ESR < 102.9, and Thunderbird < 102.9. | Fri 23 Oct |
| CVE-2026-22622 | 8.8 high | 1.0% | no CPE yet | Improper input validation in one of the session management interface of Eaton's Tripp Lite series PADM firmware could allow an authenticated user to elevate privileges resulting in unrestricted access to the device. | Fri 23 Oct |
| CVE-2026-53918 | 8.8 high | 1.0% | no CPE yet | odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. | Fri 23 Oct |
| CVE-2026-63639 | 8.8 high | 1.0% | no CPE yet | Valkey is a distributed key-value database. Prior to 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1, Valkey's RESTORE command accepts a malformed RDB stream payload that assigns one Pending Entry List NACK to multiple consumers during stream consumer-group deserialization, causing a use-after-free when one consumer is deleted while another still references the shared NACK and potentially allowing remote code execution. This issue is fixed in versions 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1. | 22 Oct |
| CVE-2026-80734 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | 21 Oct |
| CVE-2026-72420 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap | 21 Oct |
| CVE-2026-108443 | 8.8 high | 1.0% | microsoft, 365_apps, microsoft_365, office_2021 | Off-by-one error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | 19 Oct |
| CVE-2026-63801 | 8.8 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai). | 19 Oct |
| CVE-2025-11920 | 8.8 high | 1.0% | no CPE yet | The WPCOM Member plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.7.14 via the action parameter in one of its shortcodes. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. | 18 Oct |
| CVE-2026-72160 | 8.8 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | 16 Oct |
| CVE-2026-77751 | 8.8 high | 1.0% | no CPE yet | A path traversal vulnerability existed in the handling of MISP object template names during STIX 2 import and MISP-to-STIX 2 export. MISP object names are passed to PyMISP's object-template resolution mechanism, which constructs a filesystem path by joining the configured MISP object-template directory, the object name, and definition.json. An object name originating from untrusted STIX or MISP content was not sufficiently restricted before being used in this filesystem path. An attacker able to supply a crafted object name containing path separators or traversal sequences such as ../ could therefore cause template resolution to escape the expected template directory and attempt to load a definition.json file from another location accessible to the process. During STIX 2 import, an attacker-controlled x_misp_name from a custom STIX object could directly reach this template-resolution mechanism. The issue could also become persistent. A malicious object name stored in a MISP event could later be processed again during STIX 2 export. Consequently, content originally introduced in one security context could trigger filesystem access later when the event is exported by a process operating with different or greater privileges. If a suitable definition.json file exists outside the intended template directory, its contents may be interpreted as a MISP object template and fields from that file copied into the converted object. This can result in unintended disclosure of locally accessible data represented by the template file and modification of the resulting object's metadata or semantics. The patches introduce strict validation of object-template names. Valid names are restricted to a single path component containing letters, digits, hyphens, or underscores. Names that do not meet these requirements are replaced with the generic unknown-template name before reaching PyMISP template resolution. The original rejected name is preserved in the object's comment and a warning is generated, preventing traversal while retaining the source information. | 16 Oct |
| CVE-2026-111311 | 8.8 high | 1.0% | no CPE yet | The DoubleScale | All-in-One CRM – Sales, Multi-Channel Marketing, Newsletter, Booking, Helpdesk, Automation, MCP & More plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.5.1 via the store_upload function. This is due to a fail-open extension allow-list in extension_is_allowed() that returns true when wp_check_filetype() yields an empty type for unrecognized extensions such as .php, combined with magic-byte-only MIME detection and no capability check beyond is_user_logged_in(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. Exploitation requires the Helpdesk module to be enabled, as the vulnerable REST endpoint is only registered when that module is active. | 16 Oct |
| CVE-2025-12966 | 8.8 high | 1.0% | no CPE yet | The All-in-One Video Gallery plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the resolve_import_directory() function in versions 4.5.4 to 4.5.7. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | 15 Oct |
| CVE-2024-35955 | 8.8 high | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE. | 15 Oct |
| CVE-2026-84316 | 8.8 high | 1.0% | no CPE yet | Nginx UI is a web user interface for the Nginx web server. Prior to 2.4.1, config.ValidateConfigDirectives splits configuration by newline and checks only the first directive token on each line even though Nginx permits multiple semicolon-separated directives on one line. An authenticated caller can place a benign directive first and a restricted load_module, js_import, perl, or user root directive later on the same line, or can use an unrestricted include directive to load restricted content. These mechanisms bypass validation on REST, nginx_config_modify, site, and stream write paths; when an executable module is available, the injected configuration can execute code in the Nginx worker context. This issue is fixed in version 2.4.1. | 13 Oct |
| CVE-2026-78551 | 8.8 high | 1.0% | no CPE yet | RansomLook contains multiple weaknesses in its authentication endpoint that allow an unauthenticated remote attacker to enumerate valid usernames, perform unrestricted password-guessing attacks, and potentially exhaust application worker resources. For local authentication, the login implementation previously checked whether a submitted username existed before invoking the password hash verification function. Requests containing a nonexistent username therefore returned significantly faster than requests for valid accounts, for which the computationally expensive password verification routine was executed. A remote attacker could measure these response-time differences to determine which usernames correspond to valid RansomLook accounts. In addition, the /login endpoint did not restrict the number or frequency of failed authentication attempts. An attacker could consequently perform password brute-force, dictionary, password-spraying, or credential-stuffing attacks against known accounts without server-side throttling. For valid usernames, each authentication attempt also invokes the password key-derivation function, which consumes a significant amount of CPU time. A sufficiently high rate of login attempts could therefore occupy the application's synchronous Gunicorn workers and cause a denial of service affecting the entire application. The issue has been addressed by always performing password verification using a randomly generated dummy password hash when the supplied username does not exist, eliminating the username-dependent timing discrepancy. Failed authentication attempts are additionally rate-limited per client IP address using Valkey/Redis, with five failed attempts within five minutes resulting in a one-hour block. The reverse-proxy configuration was also updated so that the application derives the client address from a trusted X-Forwarded-For value that cannot be overridden by a client-supplied header. | 12 Oct |
| CVE-2025-54374 | 8.8 high | 1.0% | mayneyao, eidos | Eidos is an extensible framework for Personal Data Management. Versions 0.21.0 and below contain a one-click remote code execution vulnerability. An attacker can exploit this vulnerability by embedding a specially crafted eidos: URL on any website, including a malicious one they control. When a victim visits such a site or clicks on the link, the browser triggers the app’s custom URL handler (eidos:), causing the Eidos application to launch and process the URL, leading to remote code execution on the victim’s machine. This issue does not have a fix as of October 3, 2025 | 8 Oct |
| CVE-2026-104714 | 8.8 high | 1.0% | apache, struts | Concurrent execution using shared resource with improper synchronization ('race condition') vulnerability in Apache Struts. Where a localized message formats a date or time argument, the formatter retained for that message by the application-wide text provider is used by concurrently served requests without isolation, so a value belonging to one user can appear in another user's response, or the rendering can fail and surface as a server error. Applications whose localized messages format no date or time arguments are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue. | 8 Oct |
| CVE-2026-13097 | 8.7 high | 1.0% | redhat, freeipa, enterprise_linux | A privilege escalation flaw was found in FreeIPA. The uniqueness constraint enforced on Kerberos principal name attributes in the 389-ds directory server does not properly account for equivalent representations of the same principal name, allowing a user with sufficient LDAP write privileges to create a service principal that impersonates an existing privileged one. This can lead to unauthorized acquisition of Kerberos service tickets for sensitive services, potentially resulting in full domain compromise. | Tue 27 Oct |
| CVE-2026-115269 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 request body reader of mtrudel bandit allows an unauthenticated remote attacker to hold stream processes open indefinitely via WINDOW_UPDATE or empty SETTINGS frames sent while a Plug reads the request body. Bandit.HTTP2.Stream.do_read_data/4 in lib/bandit/http2/stream.ex waits for each frame with a fresh read_timeout. A stream WINDOW_UPDATE, or the zero-delta window update that every empty SETTINGS frame delivers to all streams, ends the wait without delivering any body data, and the loop starts a new full countdown. A client that sends one of these 9-byte frames before each countdown expires keeps read_body blocked, together with the stream process and whatever the application holds while reading, for as long as it likes. This issue affects bandit: from 1.4.0 before 1.14.0. | Mon 26 Oct |
| CVE-2026-114213 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in the WebSocket fragment reassembly of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a fragmented message made of many 1-byte continuation frames. Bandit.WebSocket.Connection checks max_fragmented_message_size against the payload bytes received, but keeps every non-final continuation frame as a new list cell around its own binary, and nothing limits the number of fragments. A 1-byte fragment costs 7 bytes on the wire but about 150 to 170 bytes of server memory, so one connection can hold about 150 times the configured limit, roughly 1.2 to 1.4 GB at the default 8 MB. Ping frames between fragments keep the connection alive past the idle timeout. This issue affects bandit: from 1.11.0 before 1.14.0. | Mon 26 Oct |
| CVE-2026-113436 | 8.7 high | 1.0% | no CPE yet | Inefficient Algorithmic Complexity vulnerability in the header integer parser of mtrudel bandit allows an unauthenticated remote attacker to consume server CPU via a content-length value or a Host or :authority port made of thousands of digits. Bandit.Headers.parse_integer/2 in lib/bandit/headers.ex builds the number one digit at a time with no limit on the digit count, allocating a new bignum at each step, so one value costs time quadratic in its length. It runs on raw request input over HTTP/1 and HTTP/2, before any range check. Over HTTP/2, a 4,000-digit value can be stored once in the HPACK dynamic table and re-sent on each new stream for about one byte: 124 KB of traffic kept the server busy for 27.9 s. This issue affects bandit: from 1.0.0-pre.7 before 1.14.0. | Mon 26 Oct |
| CVE-2026-111101 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory and CPU via a request body made of many 1-byte chunks. The chunked reader in lib/bandit/http1/socket.ex keeps every chunk as its own list cell and binary term until IO.iodata_to_binary/1 joins them, and nothing limits the number of chunks. The :length option of read_body/2 counts only data bytes, so tiny chunks cost far more memory than their payload: 48 MB of 1-byte chunks grew one handler process to about 500 MB and took about 6 s of CPU. The route does not need to read the body, because on keep-alive connections ensure_completed/1 drains unread bodies through the same reader. This issue affects bandit: from 0.1.0 before 1.14.0. | Mon 26 Oct |
| CVE-2026-109584 | 8.7 high | 1.0% | no CPE yet | Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a small HPACK-compressed HEADERS block. The block stores one large cookie value in the HPACK dynamic table and then references it tens of thousands of times with 1-byte indexed fields. In the reporter's run, a 49 KB block made a server with default settings allocate a 183 MB cookie binary before any application code ran, and every concurrent stream can repeat the cost. Bandit.HTTP2.Connection caps only the compressed block (max_header_block_size), and its check of the decoded list against max_header_list_size never fires because that setting defaults to :infinity. combine_cookie_crumbs/1 in lib/bandit/http2/stream.ex then joins every crumb into one binary. This issue affects bandit: from 0.3.3 before 1.14.0. | Mon 26 Oct |
| CVE-2026-110499 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly. The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process. This issue affects bandit: from 0.3.6 before 1.14.0. | Mon 26 Oct |
| CVE-2026-108529 | 8.7 high | 1.0% | no CPE yet | Inefficient Algorithmic Complexity vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server CPU via small SETTINGS or connection-level WINDOW_UPDATE frames. The attacker opens thousands of streams whose responses block on the connection send window, then sends cheap frames that each make the server walk the whole queue of blocked sends. In the reporter's run, with 3,000 blocked streams a single 9-byte SETTINGS frame took 133 ms to process. do_pending_sends/2 in lib/bandit/http2/connection.ex retries every queued send and, before each retry, removes that entry from the queue with List.delete/2, so one frame costs O(n²) list operations for n blocked streams. max_concurrent_streams defaults to :infinity, so the attacker chooses n. This issue affects bandit: from 0.3.4 before 1.14.0. | Mon 26 Oct |
| CVE-2026-12044 | 8.7 high | 1.0% | pgadmin, pgadmin_4 | SQL injection in pgAdmin 4 across every dialog template that renders ``COMMENT ON ... IS '<description>'`` for a user-supplied description field. The Jinja templates for Domains (and their constraints), Foreign Tables, Languages, and Event Triggers, plus the Views OID-lookup query, interpolated the description directly inside a single-quoted SQL literal -- ``'{{ data.description }}'`` -- instead of passing it through the ``qtLiteral`` escape filter. An authenticated pgAdmin user with permission to create or alter the affected object types could submit a description containing an apostrophe, break out of the literal and chain arbitrary SQL. The injected SQL runs under the PostgreSQL role the user is already authenticated as; for a connected role with ``COPY ... TO/FROM PROGRAM`` (typically PostgreSQL superuser), this chains to OS command execution on the PostgreSQL host. The defect does not cross a privilege boundary -- the user already has direct SQL access to that role through pgAdmin's Query Tool -- so the attacker gains no capability beyond what their database role already grants. The marginal impact captures bypass of any application-layer Query Tool gating an operator may have configured. The defect was originally reported against the Domain Dialog ``description`` field; a code-wide audit identified sixteen sites of the same pattern across the templates listed above. The same review also surfaced ten related sinks in the pgstattuple/pgstatindex stats templates -- ``pgstattuple('{{schema}}.{{table}}')`` and the matching pgstatindex shape -- where ``qtIdent`` escapes embedded double quotes inside the identifier but not apostrophes, so a user with CREATE privilege on a schema could plant a table or index named ``foo'bar`` and a later stats viewer would render an unbalanced literal. Fix is layered: 1. Sites: replace every ``'{{ x.description }}'`` with ``{{ x.description|qtLiteral(conn) }}`` (no surrounding quotes -- the filter wraps the value in escaped quotes itself). Plumb ``conn=self.conn`` through every ``render_template`` call that loads one of these templates. Also corrects a ``{ % elif`` Jinja typo in the foreign-table schema diff (dead branch). Rewrite the ten pgstattuple/pgstatindex stats sites to address the relation via OID + ``::oid::regclass`` cast (e.g. ``pgstattuple({{ tid }}::oid::regclass)``), eliminating the embedded literal-call form entirely so that bug-class can no longer recur there. 2. Driver hardening: ``qtLiteral`` (in ``utils/driver/psycopg3/__init__.py``) used to silently return the raw unescaped value when its ``conn`` argument was falsy. It now raises ``ValueError`` -- surfacing the entire bug class going forward. The change immediately uncovered eight latent plumbing bugs (in ``schemas/__init__.py``, ``schemas/functions/__init__.py``, ``schemas/tables/utils.py``, ``foreign_servers/__init__.py``, and seven sites in ``roles/__init__.py``) -- all fixed as part of this patch. The inner ``except`` block that swallowed adapter-level failures and returned the raw value is also removed, so unadaptable inputs raise instead of leaking unescaped values. 3. Regression tests: a per-template behavioural test renders each previously-vulnerable template with an apostrophe-injection payload and asserts the escaped fragment is present and the vulnerable fragment absent; a lint test walks every ``*.sql`` template flagging any ``'{{ ... }}'`` single-quote-wrapped interpolation against an explicit allowlist; unit tests cover the new qtLiteral fail-fast and inner-except raise paths. This issue affects pgAdmin 4: from 1.0 before 9.16. | Mon 26 Oct |
| CVE-2026-44628 | 8.7 high | 1.0% | no CPE yet | An unauthenticated attacker can crash the worklist server with a single crafted query when the server has a valid Called AE Title / storage directory, the expected lockfile, and at least one matching worklist record. | Sun 25 Oct |
| CVE-2026-56811 | 8.7 high | 1.0% | phoenixframework, phoenix | Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix (Phoenix.Socket module) allows an unauthenticated attacker to cause a denial of service against any endpoint that mounts a Phoenix socket with a reachable channel transport (WebSocket or LongPoll). This vulnerability is associated with program files lib/phoenix/socket.ex and program routine 'Elixir.Phoenix.Socket':handle_in/4. Phoenix transports do not limit the number of channels that a single transport process may join. Every phx_join message a client sends over one connection starts a persistent channel process, and the socket process accepts an unbounded number of them. A single unauthenticated client can therefore open one WebSocket or LongPoll connection and stream a large number of phx_join messages, spawning hundreds of thousands of channel processes over that one connection and eventually reaching the BEAM maximum process limit. Once the process table is exhausted the virtual machine can no longer start new processes, denying service to legitimate traffic across the whole node. Because the amplification happens inside a single connection, network-layer connection caps and rate limiting do not mitigate it. The fix adds a :max_channels_per_transport option (default 100) that bounds the number of channels a single transport process can join, forcing abusive clients to open many connections instead, where external load balancers and reverse proxies can throttle them. This issue affects phoenix: from 0.11.0 before 1.5.15, from 1.6.0-rc.0 before 1.6.17, from 1.7.0-rc.0 before 1.7.24, and from 1.8.0-rc.0 before 1.8.9. | Sun 25 Oct |
| CVE-2026-57584 | 8.7 high | 1.0% | no CPE yet | Phalcon is a high-performance, full-stack PHP framework. Prior to 5.15.0, every Phalcon MVC application built with a default router registers a built-in route whose compiled PCRE pattern contains the nested quantifier (/.), and the same construct is produced by the /:params placeholder and the CLI router. Phalcon\Mvc\Router::handle() matches this pattern against the attacker-controlled request URI on every request, so a crafted path such as one containing repeated slashes followed by decoded newlines can trigger catastrophic backtracking and cause CPU exhaustion or route-matching failure. This issue is fixed in version 5.15.0. | Sun 25 Oct |
| CVE-2026-67585 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in DivvyPayHQ absinthe_federation allows an unauthenticated remote attacker to abort the Erlang VM via crafted _entities representation keys. Every key of every object in the representations argument of the federation-mandated _entities field is converted with String.to_atom/1 by convert_key/2 in lib/absinthe/federation/schema/entities_field.ex. representations is typed as the open-ended _Any scalar, so its keys bypass schema coercion and the attacker names them freely. Atoms are never garbage collected and the BEAM atom table is hard-capped (about 1,048,576 entries by default), so one request carrying tens of thousands of unique keys creates that many permanent atoms and a handful of such requests exhausts the table and aborts the node. The impact is confined to availability: no data is read or altered, and recovery requires restarting the application. This issue affects absinthe_federation: from 0.1.0 before 0.9.3. | Sat 24 Oct |
| CVE-2026-73569 | 8.7 high | 1.0% | no CPE yet | fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. From 5.9.3 until 5.10.1, src/xmlparser/OrderedObjParser.js processes multiple DOCTYPE declarations within a single XML document and passes each declaration's entities through addInputEntities(). addInputEntities() resets maxTotalExpansions and maxExpandedLength every time it is called, allowing additional DOCTYPE declarations to repeatedly reset the configured entity-expansion limits during one parse operation. A crafted XML document can then cause excessive CPU use, event-loop blocking, memory exhaustion, and process termination. This issue is fixed in version 5.10.1. | Sat 24 Oct |
| CVE-2026-57510 | 8.7 high | 1.0% | no CPE yet | SuperPlane before 0.27.0 contains a broken object-level authorization vulnerability in the CanvasService gRPC handlers that allows authenticated users with viewer-level access to one organization to access resources belonging to other organizations by supplying arbitrary canvas or queue UUIDs without organization scoping. Attackers can read cross-tenant execution history and event payloads containing sensitive secrets, write queue items and canvas events into victim organizations, delete arbitrary canvases, and disrupt automation workflows across tenant boundaries. | Fri 23 Oct |
| CVE-2026-17346 | 8.7 high | 1.0% | pgadmin, pgadmin_4 | The fix for CVE-2026-12044 in pgAdmin 4 9.16 hardened qtLiteral and switched sixteen COMMENT ON / pgstattuple / pgstatindex templates to it, but missed several sinks that had been placed in test_sql_string_literal_lint.py's ALLOWLIST on the incorrect assumption that schema, table, publication, and subscription names sourced from pg_catalog via the browser tree could never contain an apostrophe. PostgreSQL permits arbitrary characters in quoted identifiers, so a low-privileged user able to CREATE TABLE, CREATE PUBLICATION, or CREATE SUBSCRIPTION can plant an apostrophe'd object name that breaks out of the unescaped '{{ name }}' template interpolation the moment any user (including a higher-privileged one) opens that object's Statistics or Dependencies tab, allowing arbitrary SQL statement injection in the viewing user's database session. Affected sinks: the Index Statistics query for all-indexes listing (coll_stats.sql, both the 16_plus and default PostgreSQL-version template variants -- distinct from the single-index stats.sql path already fixed in CVE-2026-12044), and the publication and subscription dependencies.sql / get_position.sql templates (both the pg and ppas/EPAS dialect variants for publications). Fix switches all of these templates to qtLiteral(conn) for name interpolation, and updates publications/__init__.py and subscriptions/__init__.py to pass conn=self.conn into the dependencies.sql render_template call so the qtLiteral filter has a connection to quote against. The corresponding ALLOWLIST entries in test_sql_string_literal_lint.py are removed now that these sinks are properly escaped rather than merely assumed safe. A behavioral regression test renders each fixed template with a stacked-statement apostrophe payload and asserts both that the object name appears exactly as qtLiteral-escaped and that the rendered SQL parses as exactly one statement, verifying the assertion genuinely fails against the pre-patch raw-interpolation form. This issue affects pgAdmin 4: the Index Statistics sink from 1.0, and the Publications/Subscriptions sinks from 5.0, both before 9.17. | Fri 23 Oct |
| CVE-2026-69079 | 8.7 high | 1.0% | no CPE yet | CTI-Transmute contains an uncontrolled resource-consumption vulnerability in the unauthenticated /activity_timeline endpoint. The endpoint accepts a user-controlled days query parameter that was not restricted to a reasonable range. A remote, unauthenticated attacker could submit an excessively large value for this parameter, causing the application to retrieve and process activity data over an arbitrarily large period. This could consume excessive database, CPU, or memory resources, delay the processing of concurrent requests, or trigger an internal server error. Repeated requests could further degrade the availability of the CTI-Transmute website. The vulnerability is corrected by clamping the requested timeline range to a minimum of one day and a maximum of 1,095 days. | Fri 23 Oct |
| CVE-2026-75853 | 8.7 high | 1.0% | no CPE yet | ArcadeDB's Gremlin wire-protocol plugin (com.arcadedb:arcadedb-gremlin) in versions <= 26.7.3 enforces authentication (SASL PLAIN) but performs no authorization: it never checks database access permissions (canAccessToDatabase) and never binds the authenticated principal into the engine. As a result, any valid server credential — even one provisioned for zero or one unrelated database — can read, write, and drop data in any database on the server by selecting a target database via a traversal-source alias, completely bypassing the engine's per-type/read-only/UPDATE_SCHEMA ACLs. The issue is fixed in version 26.8.1. | 22 Oct |
| CVE-2026-52736 | 8.7 high | 1.0% | no CPE yet | ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a remote unauthenticated P2P peer can stall a Zebra node by racing an invalid block body against the valid canonical body for the same block header hash. ZIP-244 permits the attacker to mutate coinbase scriptSig authentication data while retaining the transaction identifiers, merkle root, and block header hash, so the poisoned body fails later commitment validation but shares the canonical hash. In zebra-state/src/service.rs, queue_and_commit_to_non_finalized_state recorded the hash in non_finalized_block_write_sent_hashes before contextual validation completed and did not remove it when the write task rejected the body. When the honest body later arrived, the cached hash caused KnownBlock::WriteChannel duplicate handling to suppress it, leaving the node stuck one height behind until restart or reorganization. This issue is fixed in version 4.5.0. | 22 Oct |
| CVE-2026-62292 | 8.7 high | 1.0% | no CPE yet | libheif is a HEIF and AVIF file format decoder and encoder. From 1.19.0 until 1.23.1, a crafted uncompressed HEIF image using generic zlib unci full-item compression can crash an application that decodes an advertised tile with heif_image_handle_decode_image_tile(). In libheif/codecs/uncompressed/unc_decoder.cc, unc_decoder::fetch_tile_data() computes a large tile offset and unc_decoder::get_compressed_image_data_uncompressed() validates it with range_start_offset plus range_size. For the last advertised tile (4095, 4095), the addition can wrap to zero, bypass the bounds check, and pass an invalid source pointer and a one-terabyte length to memcpy. The observed result is an out-of-bounds read and process crash; opening the file alone does not trigger the issue because tile decoding is required. This issue is fixed in version 1.23.1. | 22 Oct |
| CVE-2026-74836 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound. Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each. This issue affects bandit: from 0.3.4 before 1.12.5. | 18 Oct |
| CVE-2026-111279 | 8.7 high | 1.0% | no CPE yet | Dragonfly through 2.0.2 contains an unbounded memory allocation vulnerability that allows unauthenticated clients to exhaust memory by passing a negative COUNT to HRANDFIELD, ZRANDMEMBER or SRANDMEMBER. Attackers can send a single command against a one-element key with a huge negative COUNT to trigger the OOM killer, terminating the instance for all clients. | 16 Oct |
| CVE-2026-76073 | 8.7 high | 1.0% | no CPE yet | Label Studio does not scope the annotation detail endpoint to the requesting user's organization. AnnotationAPI in label_studio/tasks/api.py declares queryset = Annotation.objects.all() and provides no get_queryset override, so the default lookup retrieves any annotation by primary key. The view's permission_required entries name annotations.view, annotations.change and annotations.delete, and label_studio/core/permissions.py registers every permission with rules.is_authenticated, so the check is satisfied by any logged-in account and no object-level organization test runs. The sibling task endpoint does constrain its queryset with project__organization set to the requester's active organization, which is the boundary this path omits. Annotation identifiers are sequential integers, so an authenticated user of one organization can enumerate identifiers to read, modify and delete annotations belonging to other organizations on the same instance. The same unscoped queryset appears on AnnotationConvertAPI in the same file. | 12 Oct |
| CVE-2026-29001 | 8.6 high | 1.0% | no CPE yet | TastyIgniter through 4.4.5 contain a PHP object injection vulnerability that allows authenticated administrators to achieve arbitrary code execution by submitting a serialized PHP object as a settings value, which is stored unsanitized and later unserialized by getValueAttribute() when the setting is read. Attackers can submit a serialized gadget chain, such as one generated via phpggc, through the admin settings form (for example the maintenance_message setting loaded by CheckMaintenance.php) to achieve arbitrary operating-system command execution as the PHP application process user, with the impact persisting until the value is overwritten. | Wed 28 Oct |
| CVE-2026-13165 | 8.6 high | 1.0% | no CPE yet | SzafirHost verifies the downloaded native library archive with one JarFile parser (reading the Central Directory) but extracts native libraries with JarInputStream parser (reading sequentially from local file headers). An attacker who controls the served archive can insert a malicious DLL/SO/DYLIB as a local-file-header entry between the last legitimate entry and the Central Directory, without adding it to the Central Directory. The signature verifier never sees the injected entry and accepts the archive as validly signed; the extractor reads it sequentially and writes the attacker library to the native temp directory with no hash check), while the archive-size check still passes. This can lead to remote code execution. This issue was fixed in version 1.2.2. | Sun 25 Oct |
| CVE-2026-54650 | 8.6 high | 1.0% | no CPE yet | openhole exposes localhost to the internet in one command. In 0.1.1 and earlier, openhole-server in internal/server/public_proxy.go forwarded r.URL.Path instead of preserving the original request target with r.URL.EscapedPath(), allowing percent encoded dot segments %2e and separators %2f to reach tunneled local services as ../ and / for path traversal. This issue is fixed in version 0.1.2. | Fri 23 Oct |
| CVE-2026-58014 | 8.6 high | 1.0% | gnome, redhat, glib, enterprise_linux | A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary. | 22 Oct |
| CVE-2026-80590 | 8.6 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged. | 19 Oct |
| CVE-2026-70386 | 8.5 high | 1.0% | no CPE yet | Improper neutralization of special elements used in an OS command ('OS command injection') and Missing Authorization vulnerability in OnePlus OxygenOS on Android. Any locally installed Android application, with no permissions declared and no user interaction beyond launching it, can execute arbitrary shell commands as uid 0 in the u:r:dumpstate:s0 SELinux domain. Two defects combine: (a) OnePlus's atlasservice binder interface accepts setEvent(String8 name, String8 value) from any caller without authorization, and (b) one event handler (OplusAtlasLogWriter::handleEvent, matching event name atlas_event_multimedia_audio_dumpsys) copies the caller-supplied value into the system property oplus.audio.dumpinfo.type and starts the root init service audiodumpinfo, which passes that property value unsanitized to system(). This issue affects OxygenOS: from 16.1.0 before 16.1.10.500, from 16.0.0 before 16.0.5.1200, and from 15.0.0 before 15.0.0.2000. | 22 Oct |
| CVE-2026-107815 | 8.5 high | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the CONNECT engine's DOS table type used an incorrect boundary check that permitted a one-byte null write beyond a stack buffer at an attacker-controlled offset. An authenticated user able to use the CONNECT engine could cause a crash and potentially remote code execution. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. | 14 Oct |
| CVE-2026-62240 | 8.3 high | 1.0% | crewai | CrewAI before 1.15.1 contains a server-side request forgery vulnerability in the validate_url function that performs one-shot DNS resolution and blocklist checks before returning the original URL unchanged. Attackers can bypass the security filter by supplying URLs that redirect to internal addresses or use DNS rebinding techniques to access internal services and cloud metadata endpoints. | Sat 24 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.