Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-98233 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2 ring slot before converting the virtio-net header. If the conversion fails, the drop path leaves the slot claimed. With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves the only slot unavailable, so the ring also drops the next valid packet. Clear the ownership bit on this error path. TPACKET_V3 already clears its block state here. | 19 Oct |
| CVE-2026-98177 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) | 19 Oct |
| CVE-2026-98176 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) | 19 Oct |
| CVE-2026-98057 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect. | 19 Oct |
| CVE-2026-98022 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init ptr_rings to tx_queue_len on the same notifier. netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN, sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767) there so the oversized value is rejected at set time. This takes effect whether the device is up or down, before dev->tx_queue_len is written, before any notifier fires, and before any ring is allocated. The "> S16_MAX" check also subsumes the previous unsigned-long truncation test, and a negative ifr_qlen from the ioctl lands far above the cap after conversion, so both old failure modes are covered by the one comparison. tx_queue_len is ambigious: both a per-ring sizing multiplier and a default queue-length/limit knob for consumers that allocate nothing at set time (pfifo/bfifo/gred/plug/sfb limits, htb direct_qlen, qfq max_classes, teql). 32767 is chosen as the largest value NLA_POLICY_FULL_RANGE can express for the u32 IFLA_TXQLEN policy in patch 2/3 while staying a legitimate queue length on high-BDP paths; the ring-memory trade-off of a shared knob is disclosed below. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn). - pfifo_fast: create veth pairs, set tx_queue_len to 500000, attach mq+pfifo_fast. ~28 iterations OOMs a 2GB guest. - tun: create 50 tun devices with IFF_MULTI_QUEUE, set tx_queue_len to 500000, open 8 queues each. ~1.6GB of ptr_ring allocations OOMs a 512MB guest. - tap: same as tun with IFF_TAP. ~960MB OOMs a 512MB guest. - On the fixed kernel the oversized tx_queue_len is rejected with -ERANGE at set time (all four paths: RTM_SETLINK, RTM_NEWLINK create, sysfs, ioctl - the latter two via this check, the former two via this check and the 2/3 parse policy respectively). | 19 Oct |
| CVE-2026-97994 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter Read of size 16 copy_from_iotlb copydesc_iotlb vringh_getdesc_iotlb vdpasim_net_work Cache get_vq_num_max() immediately after reset. Some backends derive it from writable queue-size state, so querying it after SET_NUM may return the current size instead of the device capability. Invalidate the cached value before reset so a failed reset leaves SET_NUM disabled. For VHOST_SET_VRING_NUM, copy the complete vring state once and use the same index and size for validation, vq->num, and set_vq_num(). This ensures that validation and use operate on the same copied values. | 19 Oct |
| CVE-2026-97981 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Count dropped frames as NAPI work The RX loop only consumes budget when it successfully delivers a frame. Error paths keep consuming descriptors without reducing the budget, so a stream of bad frames can process the entire receive ring in one poll. Move the budget accounting to a common end-of-frame path. This counts each completed frame as NAPI work whether it was delivered or dropped, matching the behavior of the vendor driver. | 19 Oct |
| CVE-2026-97618 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/net: don't overconsume buffers when using MSG_TRUNC When a recv/recvmsg is issued with MSG_TRUNC and the incoming packet is larger than the provided buffer, the net layer returns the full length of the packet rather than the number of bytes actually copied into the buffer. As a result, io_uring advances more of the provided buffer ring than was actually filled. Use the actual filled region size to consume the buffer, but still return the full size to preserve MSG_TRUNC semantics. Take care with multishot, because that seems to already truncate the consumption based on the available payload size. This was reported in https://github.com/axboe/liburing/issues/1619. [axboe: fold in size_t unsigned fix] | 19 Oct |
| CVE-2026-97617 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check resize_disabled before publishing the new subbuf order ring_buffer_subbuf_order_set() stores the new order and only then walks the CPUs, returning -EBUSY if any of them has resizing disabled. A user mapped buffer has resizing disabled, and __rb_map_vma() reads buffer->subbuf_order without buffer->mutex, so an mmap of an already mapped CPU racing the failing order change sizes the mapping with the new order and inserts pages past the sub-buffer into the VMA. Check the CPUs before storing the new order. | 19 Oct |
| CVE-2026-97574 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Don't free the live ring's TPA state on queue restart failure bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone: memcpy(clone, rxr, sizeof(*rxr)); the code currently clears pointers that the clone owns (such as rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory of the live ring that was cloned. If an allocation failure happens later and the err_free_tpa_info label is taken, the live ring's memory can be freed while still in use. Fix this by initializing the clone's pointers to NULL to prevent live ring state from being freed inadvertently. | 19 Oct |
| CVE-2026-97572 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate RX ring init failures in bnxt_init_nic() bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring() fails, but bnxt_init_nic() discards that return value and calls bnxt_init_chip(), which enables TPA. If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed and TPA would be enabled over an array with zeroed entries. This would lead to a zeroed DMA address being handed out if the agg_idx is translated to a SW index at a zeroed entry. Fix this by propagating the error out of bnxt_init_nic(). Both callers already check its return value and unwind with bnxt_free_skbs() and bnxt_free_mem(), which tolerate a partially initialized RX ring. | 19 Oct |
| CVE-2026-97571 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc() bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation fails. This leaves the remaining rxr->rx_tpa[] entries zeroed. bnxt_queue_mem_alloc() discards that return value, so the partially initialized ring is installed by bnxt_queue_start(). Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized slot can be chosen which would hand a zero DMA address to the device. Fix this by checking the return value of bnxt_alloc_one_tpa_info_data and unwinding, freeing the ring buffers. | 19 Oct |
| CVE-2026-97569 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Prevent queue stop with deferred completions When the driver receives a burst of packets, it can mark a BD with the NO_CMPL bit to defer completions. The expectation is that the last packet in the ring will have this bit unset and the completion generated by that packet will cleanup that packet and the ones preceding it. This helps to reduce the number of completions fired. The suppressed completions are controlled by the driver and the number of packets with suppressed completions scales with the size of the ring. SW USO packets, on the other hand, have an upper bound on the maximum number of BDs which can be consumed which does not scale with the ring size. So, for small rings it is possible that: a burst of packets is handed to the driver, the driver defers completions for all of the packets because the number of free descriptors stays above the threshold in the driver. Then, a USO packet arrives, but the number of BDs available is not enough and the USO code exits early. In this case, you end up in a state where the ring is full of packets with their completions suppressed, which can cause the queue to stop and never be restarted. Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small rings (<= 457 descriptors, below the driver default value) when a burst of packets fills the ring, followed by a large USO packet that can't fit. For larger rings, the delta between the completion suppression threshold and the BDs required for SW USO is large enough that completions will fire and this case is unreachable. This issue was pointed out by Sashiko and while it seems fairly unlikely given that the queue size must be small to trigger this, it is indeed possible. Fix this by tracking the last BD which deferred completions and centralizing the logic for deciding when to ring the doorbell. The NO_CMPL bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is covered, including the SW USO early exit. This guarantees the ring always ends in a BD which generates a completion to clean it and wake the queue. | 19 Oct |
| CVE-2026-93242 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() qla24xx_process_response_queue() advances ring_ptr past the head IOCB before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr already points at the first continuation IOCB. The function however looped purex->entry_count times starting at ring_ptr. As entry_count includes the head, this consumed one entry too many: it stamped RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring past it, silently dropping a legitimate firmware response. The head IOCB's signature was also never marked. Mark the head processed and account for it, then consume only the entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer(). | 19 Oct |
| CVE-2026-92514 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring through get_next_valid_eqe() and updates eq->dbrec through notify_eq(). erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ. free_irq() prevents another hard IRQ and waits for an in-flight handler, but it does not drain a tasklet that the handler already scheduled. The tasklet can therefore access eq->qbuf or eq->dbrec after erdma_eq_destroy() frees them. Clearing ceq_cb->ready does not synchronize with a tasklet that already passed the check at the start of erdma_ceq_completion_handler(). Kill the tasklet after free_irq(), when no handler can schedule it again, and before erdma_ceq_uninit_one() releases the EQ buffers. | 19 Oct |
| CVE-2026-90015 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It was found with a USB mass storage device behind xHCI backing a dm-verity target with 512 byte hash blocks, where the stale data is detected rather than silently consumed. The device enumerates as SuperSpeed, so wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash block. verity_prefetch_io() makes the block layer merge hundreds of them into a single request of up to 512 scatterlist entries of 512 bytes each. At 256 TRBs per ring segment such a TD spans three segments, and every segment boundary falls on an odd multiple of 512, i.e. unaligned to wMaxPacketSize. dm-bufio then caches a hash block holding stale data and dm-verity declares the metadata block corrupted: device-mapper: verity: 8:2: metadata block 10850 is corrupted A reproducer running this under qemu is available at https://github.com/baloo/xhci-verity The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs) already lives on the ring segment, so there is nothing extra to track. Keep recording the last bounced segment in td->bounce_seg and, on completion, walk the segments from td->start_seg up to it, unmapping every segment that still has a pending bounce. Stopping at td->bounce_seg rather than td->end_seg matters: a bounce implies the TD continues past that segment's link TRB, so bounce_seg is always strictly before end_seg, and a later TD may already have started in end_seg and been bounced there. Walking that far would copy a foreign bounce buffer into this URB and unmap it twice. It also keeps the walk correct if a TD ever wraps the whole ring so that end_seg == start_seg. [mn: Add ring->num_segs check to prevent unlikely infinite for loop.] | 19 Oct |
| CVE-2026-89842 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt(). | 19 Oct |
| CVE-2026-89749 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). | 19 Oct |
| CVE-2026-89502 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Free cpu_buffer::free_page with subbuf_order When sub-buffers use an order greater than 0, cpu_buffer->free_page is allocated with subbuf_order. Use the correct order for cpu_buffer->free_page. | 19 Oct |
| CVE-2026-81009 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/query: cap user size passed to copy_struct_to_user io_handle_query_entry() clamps hdr.size for the inbound copy_from_user() but keeps the original user value as usize. copy_struct_to_user() uses that usize and, when it is larger than the kernel result, clear_user()s the trailing bytes. As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing, including on the error path where res_size stays 0. The interface is reachable without a ring via IORING_REGISTER_QUERY. Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_* interfaces. | 19 Oct |
| CVE-2026-80946 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fuse: copy request headers via a stack buffer for io-uring The fuse-io-uring transport copies req->in.h out to the ring in fuse_uring_copy_to_ring() and req->out.h back in fuse_uring_commit(). Both headers live inside the fuse_request slab object, whose cache (fuse_req_cachep) is created without a usercopy whitelist, so copying them directly to/from userspace trips CONFIG_HARDENED_USERCOPY and panics: usercopy: Kernel memory exposure attempt detected from SLUB object 'fuse_request' (offset 56, size 40)! kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort (mm/usercopy.c:90) Call Trace: __check_heap_object (mm/slub.c:8268) __check_object_size (mm/usercopy.c:197 mm/usercopy.c:258 mm/usercopy.c:223) copy_header_to_ring (fs/fuse/dev_uring.c:618) fuse_uring_prepare_send (fs/fuse/dev_uring.c:776 fs/fuse/dev_uring.c:785) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1306) tctx_task_work_run (io_uring/tw.c:96) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2685) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Bounce both headers through an on-stack copy so the usercopy touches stack memory, not the slab object. | 19 Oct |
| CVE-2026-80934 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames (MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is always zero, so the unmap loop runs zero times and the skb DMA mapping in buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the generic DMA-ring cleanup skips it as well. Each AddBA req therefore leaks one TX DMA mapping, roughly one per (re)association. With WED enabled these mappings are bounced through the WED swiotlb pool, so under continuous client reconnect churn the pool is exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi MCU and other on-SoC consumers. Keep the deferred (token release) unmap that the design relies on, and add an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps buf[1] from the MAC-TXP layout for those frames, delegating to mt76_connac_txp_skb_unmap() otherwise. | 19 Oct |
| CVE-2026-80858 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fuse: publish io-uring queues with release semantics fuse_uring_create_queue() initializes a fuse_ring_queue and then publishes the pointer into ring->queues[qid] with WRITE_ONCE() under the fch->lock. There are several readers that may concurrently be fetching that pointer locklessly and then deferencing it. WRITE_ONCE() doesn't ensure ordering of the queue's field initialization before the ring->queues[qid] pointer assignment. The queue must be published with smp_store_release() so the field initialization is guaranteed to happen before. Readers in paths where the read may happen concurrently with the store need to use READ_ONCE() because any race involving a plain access is undefined. | 19 Oct |
| CVE-2025-68759 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Fix potential memory leaks in rtl8180_init_rx_ring() In rtl8180_init_rx_ring(), memory is allocated for skb packets and DMA allocations in a loop. When an allocation fails, the previously successful allocations are not freed on exit. Fix that by jumping to err_free_rings label on error, which calls rtl8180_free_rx_ring() to free the allocations. Remove the free of rx_ring in rtl8180_init_rx_ring() error path, and set the freed priv->rx_buf entry to null, to avoid double free. | 14 Oct |
| CVE-2025-68186 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up The function ring_buffer_map_get_reader() is a bit more strict than the other get reader functions, and except for certain situations the rb_get_reader_page() should not return NULL. If it does, it triggers a warning. This warning was triggering but after looking at why, it was because another acceptable situation was happening and it wasn't checked for. If the reader catches up to the writer and there's still data to be read on the reader page, then the rb_get_reader_page() will return NULL as there's no new page to get. In this situation, the reader page should not be updated and no warning should trigger. | 14 Oct |
| CVE-2025-68199 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext When alloc_slab_obj_exts() fails and then later succeeds in allocating a slab extension vector, it calls handle_failed_objexts_alloc() to mark all objects in the vector as empty. As a result all objects in this slab (slabA) will have their extensions set to CODETAG_EMPTY. Later on if this slabA is used to allocate a slabobj_ext vector for another slab (slabB), we end up with the slabB->obj_exts pointing to a slabobj_ext vector that itself has a non-NULL slabobj_ext equal to CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to free slabB->obj_exts vector. free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will generate a warning because it expects slabobj_ext vectors to have a NULL obj_ext, not CODETAG_EMPTY. Modify mark_objexts_empty() to skip the warning and setting the obj_ext value if it's already set to CODETAG_EMPTY. To quickly detect this WARN, I modified the code from WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1); We then obtained this message: [21630.898561] ------------[ cut here ]------------ [21630.898596] kernel BUG at mm/slub.c:2050! [21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1 vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi net_failover virtio_console failover virtio_mmio dm_mirror dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4 aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject] [21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump: loaded Tainted: G W 6.18.0-rc1+ #74 PREEMPT(voluntary) [21630.910495] Tainted: [W]=WARN [21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [21630.912392] pc : __free_slab+0x228/0x250 [21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp : ffff8000a02f73e0 [21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27: ffff0000c0011c40 [21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24: ffff000102199b40 [21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21: ffff0000c0011c40 [21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18: 0000000000000000 [21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12: ffff70001405ee66 [21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 : ffff800080a295dc [21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 : 0000000000003000 [21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 : 0000000000000007 [21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 : 0000000000000001 [21630.921810] Call trace: [21630.922130] __free_slab+0x228/0x250 (P) [21630.922669] free_slab+0x38/0x118 [21630.923079] free_to_partial_list+0x1d4/0x340 [21630.923591] __slab_free+0x24c/0x348 [21630.924024] ___cache_free+0xf0/0x110 [21630.924468] qlist_free_all+0x78/0x130 [21630.924922] kasan_quarantine_reduce+0x11 ---truncated--- | 14 Oct |
| CVE-2026-74602 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0. This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if when freed: free_buffer_page() relies on this value. Align the value with the actual allocation size (buffer::subbuf_order). | 14 Oct |
| CVE-2026-74622 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free RX pages of consumed but not refilled buffers aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to hardware. Since the page reuse strategy was added, a cleaned RX buffer keeps its page (and its DMA mapping) in the ring for reuse, and refill is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES slots are free. Slots that were consumed but not yet reposted therefore sit in the complementary [sw_tail, sw_head) gap with a live page, and the deinit walk never visits them: up to a refill batch worth of pages and DMA mappings leak on every interface down. Walk the whole ring instead and release whatever is still there. Also bail out if the buffer ring is already gone: a partial aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so aq_ptp_ring_deinit() still gets here on the unwind path. | 14 Oct |
| CVE-2026-74623 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free stranded TX buffers on ring deinit aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean() call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and stops at hw_head, which no longer moves once aq_vec_stop() has stopped the hardware and NAPI. Completed descriptors beyond the budget and everything still posted in [hw_head, sw_tail) keep their skb or xdp_frame when the interface goes down: aq_vec_ring_free() then frees the buffer ring and the references are lost for good. Today this is a silent memory leak on every interface down under TX/XDP_TX load. With the conversion of the RX path to page_pool posted for net-next it becomes much more visible: XDP_TX frames carry fragment references on the RX ring's page_pool, so a single stranded frame keeps the pool's inflight count above zero forever. page_pool_destroy() then never completes, the pool is leaked together with its pages, and "page_pool_release_retry() stalled pool shutdown" is warned every 60 seconds from that point on, on every ifdown, XDP detach or ring resize under XDP_TX load. Bring back aq_ring_tx_deinit() as it was before the removal and use it for teardown again, with one extension: TX rings can hold xdp_frames nowadays, so release those too. They are returned with xdp_return_frame() since this runs in process context. | 14 Oct |
| CVE-2026-74659 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. | 14 Oct |
330 of 330 · Previous
Download these 330 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.