Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-68315 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer. | 19 Oct |
| CVE-2026-68096 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: lock_two_directories+0x13f/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&inode->i_sb->s_type->i_mutex_dir_key/1); lock(&inode->i_sb->s_type->i_mutex_dir_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by mv/5099: #0: ffff888112a9c440 (sb_writers#13) at: do_renameat2+0x34c/0xbc0 #1: ffff888112a9c790 (&type->s_vfs_rename_key#3) at: do_renameat2+0x415/0xbc0 #2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1) at: lock_two_directories+0x13f/0x2b0 #3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5) at: lock_two_directories+0x175/0x2b0 #4: ffffffffb3a1fb10 (&fsnotify_mark_srcu) at: fsnotify+0x454/0x28a0 #5: ffffffffaf886230 (audit_filter_mutex) at: audit_update_watch+0x36/0x11e0 stack backtrace: Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_deadlock_bug.cold+0xbd/0xca validate_chain+0x83a/0xf00 __lock_acquire+0xcac/0x1d20 lock_acquire.part.0+0x11b/0x360 down_write_nested+0x9f/0x230 __kern_path_locked+0x10a/0x2f0 kern_path_locked+0x26/0x40 audit_alloc_mark+0xfb/0x4f0 audit_dupe_exe+0x6c/0xe0 audit_dupe_rule+0x6c2/0xc00 audit_update_watch+0x4cc/0x11e0 audit_watch_handle_event+0x12c/0x1b0 send_to_group+0x5d0/0x8b0 fsnotify+0x615/0x28a0 fsnotify_move+0x1d8/0x630 vfs_rename+0xdcd/0x1df0 do_renameat2+0x9d4/0xbc0 __x64_sys_renameat+0x192/0x260 do_syscall_64+0x92/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0491fe8c4e Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89 RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c </TASK> The aforementioned deadlock can be consistently reproduced by running the script below: audit-dupe-exe-deadlock.sh -------------------------- #!/bin/bash auditctl -D mkdir -p /tmp/foo touch /tmp/file auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr mv /tmp/file /tmp/foo/file rm -Rf /tmp/foo This patch fixes the issue by introducing struct audit_watch_ctx to pass the fsnotify event context down to audit_alloc_mark(). By utilizing the already-resolved directory inode provided by the event, we bypass the kern_path_parent() path resol ---truncated--- | 19 Oct |
| CVE-2026-53199 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. | 19 Oct |
| CVE-2026-43194 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | 19 Oct |
| CVE-2025-61770 | 7.5 high | 1.0% | rack | Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, `Rack::Multipart::Parser` buffers the entire multipart preamble (bytes before the first boundary) in memory without any size limit. A client can send a large preamble followed by a valid boundary, causing significant memory use and potential process termination due to out-of-memory (OOM) conditions. Remote attackers can trigger large transient memory spikes by including a long preamble in multipart/form-data requests. The impact scales with allowed request sizes and concurrency, potentially causing worker crashes or severe slowdown due to garbage collection. Versions 2.2.19, 3.1.17, and 3.2.2 enforce a preamble size limit (e.g., 16 KiB) or discard preamble data entirely. Workarounds include limiting total request body size at the proxy or web server level and monitoring memory and set per-process limits to prevent OOM conditions. | 19 Oct |
| CVE-2025-61771 | 7.5 high | 1.0% | rack | Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, ``Rack::Multipart::Parser` stores non-file form fields (parts without a `filename`) entirely in memory as Ruby `String` objects. A single large text field in a multipart/form-data request (hundreds of megabytes or more) can consume equivalent process memory, potentially leading to out-of-memory (OOM) conditions and denial of service (DoS). Attackers can send large non-file fields to trigger excessive memory usage. Impact scales with request size and concurrency, potentially leading to worker crashes or severe garbage-collection overhead. All Rack applications processing multipart form submissions are affected. Versions 2.2.19, 3.1.17, and 3.2.2 enforce a reasonable size cap for non-file fields (e.g., 2 MiB). Workarounds include restricting maximum request body size at the web-server or proxy layer (e.g., Nginx `client_max_body_size`) and validating and rejecting unusually large form fields at the application level. | 19 Oct |
| CVE-2025-61772 | 7.5 high | 1.0% | rack | Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, `Rack::Multipart::Parser` can accumulate unbounded data when a multipart part’s header block never terminates with the required blank line (`CRLFCRLF`). The parser keeps appending incoming bytes to memory without a size cap, allowing a remote attacker to exhaust memory and cause a denial of service (DoS). Attackers can send incomplete multipart headers to trigger high memory use, leading to process termination (OOM) or severe slowdown. The effect scales with request size limits and concurrency. All applications handling multipart uploads may be affected. Versions 2.2.19, 3.1.17, and 3.2.2 cap per-part header size (e.g., 64 KiB). As a workaround, restrict maximum request sizes at the proxy or web server layer (e.g., Nginx `client_max_body_size`). | 19 Oct |
| CVE-2025-59043 | 7.5 high | 1.0% | openbao | OpenBao is an open source identity-based secrets management system. In OpenBao versions prior to 2.4.1, JSON objects after decoding may use significantly more memory than their serialized version. It is possible to craft a JSON payload to maximize the factor between serialized memory usage and deserialized memory usage, similar to a zip bomb, with factors reaching approximately 35. This can be used to circumvent the max_request_size configuration parameter which is intended to protect against denial of service attacks. The request body is parsed into a map very early in the request handling chain before authentication, which means an unauthenticated attacker can send a specifically crafted JSON object and cause an out-of-memory crash. Additionally, for requests with large numbers of strings, the audit subsystem can consume large quantities of CPU. The vulnerability is fixed in version 2.4.1. | 19 Oct |
| CVE-2026-89059 | 7.5 high | 1.0% | no CPE yet | A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. | 19 Oct |
| CVE-2026-93151 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blktests nvme/061 with the rdma transport and the siw driver. Kernel kmemleak feature reports them as follows: unreferenced object 0xffff88812bc490c0 (size 32): comm "kworker/2:1H", pid 409, jiffies 4307744490 backtrace (crc 89afd339): __kmalloc_noprof+0x5f9/0x890 sgl_alloc_order+0x7b/0x380 nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet] nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 unreferenced object 0xffff88814bd05e80 (size 64): comm "kworker/3:1H", pid 148, jiffies 4295195428 backtrace (crc e35510cb): __kmalloc_noprof+0x5f9/0x890 rdma_rw_ctx_init+0x333/0x1fa0 [ib_core] nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 To avoid the memory leaks, reclaim the memory of the in-flight responses when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources() that frees up the RDMA read/write context and the request SGLs of such responses. | 19 Oct |
| CVE-2026-90293 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe. Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told it may use it. Allocating there keeps the existing property that a memory allocation failure cannot happen once the final Login Response is on the wire. The receive queue is already empty between the final Login Request and isert_post_recvm(); this moves the second point later, from a median of 92 us to 172 us over 1200 logins. Only an initiator that sends before it has been told to can reach that window, and on IB and RoCE its send is retried there until the buffers appear - isert_rdma_accept() asks for rnr_retry_count = 7. iWARP has no RNR flow control, so there the same send terminates the connection instead. Measured over rxe, 400 login cycles per run, with an initiator that does not wait: an instrumented build counted no entries to isert_recv_done() before the buffers are posted in 10 runs, where that initiator oopsed 8 of 10 unpatched runs and 5 of 10 with only the previous patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | 19 Oct |
| CVE-2026-90103 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation. | 19 Oct |
| CVE-2026-89968 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: reject unsolicited H2CData PDUs nvmet_tcp_handle_h2c_data_pdu() accepts an H2CData PDU after only checking that its TTAG is a valid in-range command index and that the command's data buffers are mapped. It never checks that the target has actually solicited that data by sending an R2T for the command. A remote host can abuse this. It submits a write command that takes the R2T path and, before the target transmits the R2T, sends an H2CData PDU for that command's tag. The data completes the command early, and when the command then fails synchronously (e.g. a length mismatch caught by nvmet_check_transfer_len()), it is completed a second time. Each completion calls nvmet_tcp_queue_response(), so the same command is added to queue->resp_list twice while it is still linked; the second llist_add() makes the node point to itself (lentry->next == lentry). nvmet_tcp_process_resp_list() then walks that self-referential node and adds the command to resp_send_list twice. With CONFIG_DEBUG_LIST this trips the "list_add double add" check (kernel BUG); without it the loop never terminates and the nvmet_tcp workqueue wedges (soft-lockup). It is remotely triggerable and needs no authentication on an allow_any_host subsystem. Track whether an R2T has been transmitted for a command and reject an H2CData PDU that arrives before it. The flag is cleared on command reuse (nvmet_tcp_get_cmd() zeroes cmd->flags) and stays set across the multiple H2CData PDUs of a single solicited transfer. | 19 Oct |
| CVE-2026-89679 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix null dereference in nfsd4_setattr for deleg timestamp attrs When a SETATTR request includes FATTR4_WORD2_TIME_DELEG_ACCESS or FATTR4_WORD2_TIME_DELEG_MODIFY in the attribute bitmap, nfsd4_setattr() sets deleg_attrs=true and calls nfs4_preprocess_stateid_op() to validate the stateid. If the client supplies the NFSv4 "one stateid" (all-0xFF bytes), check_special_stateids() returns nfs_ok without populating the output nfs4_stid pointer, because the special-stateid path in nfs4_preprocess_stateid_op() jumps to done: with s==NULL, and the "if (s)" block that would set *cstid is skipped. The local variable `st` remains NULL. Back in nfsd4_setattr(), the if (deleg_attrs) block then unconditionally dereferences st->sc_type (at offset 4 from NULL), causing a kernel oops. This is remotely triggerable by any NFSv4 client: send COMPOUND [PUTROOTFH, SETATTR(ONE_STATEID, {bmval2=FATTR4_WORD2_TIME_DELEG_ACCESS, ...})]. No authentication, delegation, or prior state is required. Fix by adding a NULL check before the dereference. A special stateid is not a delegation stateid, so the existing nfserr_bad_stateid return value is already correct; we only need to guard the pointer dereference itself. | 19 Oct |
| CVE-2026-89483 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900 [ 11.991969] dma_map_phys+0x14c8/0x1900 [ 11.992220] dma_map_page_attrs+0xcf/0x130 [ 11.992485] e1000_xmit_frame+0x4099/0x6d10 [ 11.992768] dev_hard_start_xmit+0x22f/0xa80 [ 11.993068] sch_direct_xmit+0x35c/0xcb0 [ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0 [ 11.993608] ip_finish_output2+0x1903/0x1c30 [ 11.993881] ip_finish_output+0x288/0x870 [ 11.994125] ip_output+0x15e/0x400 [ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0 [ 11.994639] ip_queue_xmit+0x60/0x80 [ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0 [ 11.995210] tcp_write_xmit+0x3a36/0x9160 [ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0 [ 11.995854] tcp_push+0x7dc/0x840 [ 11.996076] tcp_sendmsg_locked+0x766c/0x8400 [ 11.996371] tcp_sendmsg+0x4b/0x90 [ 11.996572] inet_sendmsg+0x134/0x2a0 [ 11.996823] __sock_sendmsg+0x265/0x360 [ 11.997076] sock_sendmsg+0x100/0x1e0 [ 11.997293] nvme_tcp_try_send+0x196f/0x6370 [ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0 [ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50 [ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0 [ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0 [ 11.998865] blk_mq_run_work_fn+0x13b/0x280 [ 11.999146] process_scheduled_works+0x966/0x1ad0 [ 11.999465] worker_thread+0xe44/0x1480 [ 11.999709] kthread+0x53b/0x600 [ 11.999927] ret_from_fork+0x29f/0x7c0 [ 12.000191] ret_from_fork_asm+0x1a/0x30 [ 12.000460] [ 12.000558] Uninit was created at: [ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30 [ 12.001096] alloc_pages_mpol+0x1d0/0x5f0 [ 12.001326] alloc_pages_noprof+0x102/0x290 [ 12.001627] nvme_init_ctrl+0x5a3/0x9f0 [ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0 [ 12.002170] nvmf_dev_write+0x4c68/0x4fd0 [ 12.002426] vfs_write+0x587/0x1a10 [ 12.002636] __x64_sys_write+0x207/0x4f0 [ 12.002874] x64_sys_call+0x2ff0/0x3ea0 [ 12.003123] do_syscall_64+0x147/0x3b0 [ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 12.003680] [ 12.003777] Bytes 16-2843 of 2844 are uninitialized [ 12.004068] Memory access of size 2844 starts at ffff888109f82000 [ 12.004412] [ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy) [ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 12.005762] Workqueue: kblockd blk_mq_run_work_fn [ 12.006073] ===================================================== Allocate the page with __GFP_ZERO. The single allocation site covers every use of it: bytes no discard has written stay zero, and bytes one did write hold that controller's own range list, which it has already been sent. | 19 Oct |
| CVE-2026-89477 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference. KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ> A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites. | 19 Oct |
| CVE-2025-46404 | 7.5 high | 1.0% | entrouvert, lasso | A denial of service vulnerability exists in the lasso_provider_verify_saml_signature functionality of Entr'ouvert Lasso 2.5.1. A specially crafted SAML response can lead to a denial of service. An attacker can send a malformed SAML response to trigger this vulnerability. | 18 Oct |
| CVE-2025-46705 | 7.5 high | 1.0% | entrouvert, lasso | A denial of service vulnerability exists in the g_assert_not_reached functionality of Entr'ouvert Lasso 2.5.1 and 2.8.2. A specially crafted SAML assertion response can lead to a denial of service. An attacker can send a malformed SAML response to trigger this vulnerability. | 18 Oct |
| CVE-2025-46784 | 7.5 high | 1.0% | entrouvert, lasso | A denial of service vulnerability exists in the lasso_node_init_from_message_with_format functionality of Entr'ouvert Lasso 2.5.1. A specially crafted SAML response can lead to a memory depletion, resulting in denial of service. An attacker can send a malformed SAML response to trigger this vulnerability. | 18 Oct |
| CVE-2026-102599 | 7.5 high | 1.0% | no CPE yet | Socket.IO enables bidirectional and low-latency communication for every platform. From Engine.IO 6.6.0 until 6.6.10, a transport upgrade can independently derive an Engine.IO protocol revision from the upgrade request instead of enforcing the revision stored on the existing session. A malicious client can establish a valid session and send an upgrade request with a different or omitted EIO query parameter, attaching a transport with incompatible parser and heartbeat behavior. A crafted heartbeat packet can then trigger an uncaught exception and terminate the Node.js process, including when Engine.IO v3 compatibility is disabled because an omitted EIO value is interpreted as revision 3 on the affected path. This issue is fixed in Engine.IO 6.6.10. | 17 Oct |
| CVE-2026-80527 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ] | 16 Oct |
| CVE-2026-104827 | 7.5 high | 1.0% | no CPE yet | react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. From 1.0.0 until 1.11.1, React\Http\Browser uses ClientRequestStream::handleData() to append response-header bytes to an internal buffer without enforcing a size limit. A remote server can send a valid status line and partial header, withhold the \r\n\r\n or \n\n header terminator, and continue streaming data so the buffer grows for the life of the connection. Applications that fetch attacker-controlled or attacker-influenced URLs, including URLs reached through redirects, can exhaust PHP memory_limit and crash the event-loop or worker process. Confidentiality and integrity are unaffected. This issue is fixed in version 1.11.1. | 16 Oct |
| CVE-2026-74282 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tipc: prevent snt_unacked underflow on CONN_ACK tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack. | 16 Oct |
| CVE-2026-72464 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | 16 Oct |
| CVE-2026-72330 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | 16 Oct |
| CVE-2026-72231 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. | 16 Oct |
| CVE-2026-107937 | 7.5 high | 1.0% | apache, cxf | In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service. Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. | 16 Oct |
| CVE-2026-93564 | 7.5 high | 1.0% | no CPE yet | A flaw was found in Netty. A reference-count leak in the HAProxy PROXY-v2 message decoder allows a remote, unauthenticated attacker to send specially crafted PROXY-protocol v2 headers. This can lead to memory exhaustion, resulting in a Denial of Service (DoS) for the affected system. | 15 Oct |
| CVE-2026-93558 | 7.5 high | 1.0% | no CPE yet | A flaw was found in Netty's WebSocketServerExtensionHandler. A remote, unauthenticated attacker can exploit this vulnerability by using HTTP/1.1 pipelining to send requests faster than the application can respond. This leads to an unbounded growth of a per-connection queue, consuming excessive memory. Eventually, this can cause the Java Virtual Machine (JVM) to exhaust its heap, resulting in a Denial of Service (DoS) for the affected server. | 15 Oct |
| CVE-2026-93488 | 7.5 high | 1.0% | no CPE yet | A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. | 15 Oct |
| CVE-2026-46110 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. | 15 Oct |
| CVE-2026-63462 | 7.5 high | 1.0% | no CPE yet | Unleash is an open-source feature management platform. Prior to 7.5.2, 7.6.5, and 8.0.2, the shared OpenAPI validation error path in src/lib/error/bad-data-error.ts passes a raw request value from lodash.get to JSON.stringify in genericErrorMessage and fromOpenApiValidationErrors without guarding stack exhaustion. An unauthenticated attacker can send a roughly 10 KB JSON value nested thousands of levels deep to POST /edge/validate, POST /edge/issue-token, or another OpenAPI-validated endpoint, causing RangeError: Maximum call stack size exceeded in openAPIValidationMiddleware and terminating the Node process because no uncaughtException handler recovers it. Replaying the request can sustain a complete service outage. This issue is fixed in versions 7.5.2, 7.6.5, and 8.0.2. | 14 Oct |
| CVE-2025-14753 | 7.5 high | 1.0% | ibm, cloud_pak_for_data | IBM Cloud Pak for Data 5.1.2 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. | 14 Oct |
| CVE-2025-65562 | 7.5 high | 1.0% | free5gc | The free5GC UPF suffers from a lack of bounds checking on the SEID when processing PFCP Session Deletion Requests. An unauthenticated remote attacker can send a request with a very large SEID (e.g., 0xFFFFFFFFFFFFFFFF) that causes an integer conversion/underflow in LocalNode.DeleteSess() / LocalNode.Sess() when a uint64 SEID is converted to int and used in index arithmetic. This leads to a negative index into n.sess and a Go runtime panic, resulting in a denial of service (UPF crash). The issue has been reproduced on free5GC v4.1.0 with crashes observed in the session lookup/deletion path in internal/pfcp/node.go; other versions may also be affected. No authentication is required. | 13 Oct |
| CVE-2025-53114 | 7.5 high | 1.0% | no CPE yet | CometD is a scalable comet implementation for web messaging. In versions 5.0.0 through 5.0.22, 6.0.0 through 6.0.18, 7.0.0 through 7.0.18, and 8.0.0 through 8.0.8, bad clients that always send a fixed batch value when the server is using the acknowledgement extension may cause the unacknowledged message queue to grow indefinitely, eventually causing an `OutOfMemoryError`. Versions 5.0.23, 6.0.19, 7.0.19, and 8.0.9 patch the issue. As a workaround, disable the acknowledgement extension. | 12 Oct |
| CVE-2026-76905 | 7.5 high | 1.0% | no CPE yet | kin-openapi is a Go project for handling OpenAPI files. From 0.10.0 until 0.141.0, openapi3filter.convertParseError in openapi3filter/validation_error_encoder.go dereferences e.Parameter.In without checking whether e.Parameter is nil. A malformed non-string scalar field in a multipart/form-data request body produces a nested ParseError with a nil RequestError.Parameter, and applications that render the validation error through openapi3filter.ConvertErrors or ValidationErrorEncoder panic. An unauthenticated client can repeatedly send such requests to deny service when the application lacks a recovery boundary. JSON request bodies and applications that do not use these error-rendering helpers are not affected. This issue is fixed in version 0.141.0. | 12 Oct |
| CVE-2026-77384 | 7.5 high | 1.0% | no CPE yet | libp2p is a JavaScript implementation of the libp2p networking stack. Prior to version 4.2.9, the reservation refresh path in reservation-store.ts reuses the same retimeableSignal but unconditionally registers another abort listener on every refresh. As a result, a remote peer can repeatedly send valid RESERVE requests for the same reservation, causing unbounded listener and closure growth in @libp2p/circuit-relay-v2 relay servers and leading to denial of service. This issue is fixed in version 4.2.9. | 12 Oct |
| CVE-2025-69223 | 7.5 high | 1.0% | aiohttp | AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3. | 11 Oct |
| CVE-2026-97031 | 7.5 high | 1.0% | no CPE yet | Multiple ECH outer extension references are not permitted under RFC 9849; previously, a client could send a well-crafted packet that could trigger memory exhaustion in the server process by specifying multiple references. We now reject these as malformed and curb the memory amplification vector as a result. | 9 Oct |
| CVE-2025-58582 | 7.5 high | 1.0% | sick, enterprise_analytics | If a user tries to login but the provided credentials are incorrect a log is created. The data for this POST requests is not validated and it’s possible to send giant payloads which are then logged. | 9 Oct |
| CVE-2026-84784 | 7.5 high | 1.0% | openssl | Issue summary: A malicious remote peer may flood the local QUIC stack with NEW_CONNECTION_ID frames by avoiding a limit check on how many connection IDs the remote QUIC stack can use. Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID frame is dispatched via the Control Frame Queue (CFQ). If the remote peer also withholds ACKs, then it can force the local stack to allocate ~400MB (depending on ACK delay). CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism by which a remote peer can notify the local QUIC stack to change the destination connection ID (a.k.a. CID) the local stack uses to identify the connection at the remote peer. Each CID is associated with a sequence number. The sequence number is transmitted in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID which is being either associated with a connection or retired. The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know a new CID is being associated with an existing connection. The NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the retire-prior-to number. The retire-prior-to identifies existing CIDs that are to be retired. The local QUIC stack must send a RETIRE_CONNECTION_ID for every destination CID whose sequence number is less than retire-prior-to. The CID becomes retired after the local stack receives an ACK for its RETIRE_CONNECTION_ID frame. Although the OpenSSL QUIC stack supports at most one destination CID for every connection, it can be tricked into processing more than one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC stack currently retires the destination CID as soon as it receives the NEW_CONNECTION_ID, while in fact the destination CID must be retired after an ACK for the RETIRE_CONNECTION_ID frame is received. Correcting the flawed logic also fixes the backlog growth. [1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary. | 8 Oct |
| CVE-2023-0361 | 7.4 high | 1.0% | gnu, redhat, gnutls, enterprise_linux, debian_linux | A timing side-channel in the handling of RSA ClientKeyExchange messages was discovered in GnuTLS. This side-channel can be sufficient to recover the key encrypted in the RSA ciphertext across a network in a Bleichenbacher style attack. To achieve a successful decryption the attacker would need to send a large amount of specially crafted messages to the vulnerable server. By recovering the secret from the ClientKeyExchange message, the attacker would be able to decrypt the application data exchanged over that connection. | 14 Oct |
| CVE-2026-23904 | 7.3 high | 1.0% | apache, kyuubi | Kyuubi Engine UI proxy accepts a host and port from the request path and proxies HTTP requests to that destination. A remote requester with network access to the proxy can cause the Kyuubi server to send HTTP requests to arbitrary reachable hosts, resulting in SSRF or open-proxy behavior. This issue affects Apache Kyuubi: from 1.8.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which disables the proxy by default. To restore proxied Engine UI, set kyuubi.frontend.rest.engine.ui.proxy.enabled=true and configure allowed target hosts with kyuubi.frontend.rest.engine.ui.proxy.hosts. | 23 Oct |
| CVE-2024-35888 | 7.3 high | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb->head syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0 | 15 Oct |
| CVE-2025-9611 | 7.2 high | 1.0% | no CPE yet | Microsoft Playwright MCP Server versions prior to 0.0.40 fails to validate the Origin header on incoming connections. This allows an attacker to perform a DNS rebinding attack via a victim’s web browser and send unauthorized requests to a locally running MCP server, resulting in unintended invocation of MCP tool endpoints. | 8 Oct |
| CVE-2026-85171 | 7.1 high | 1.0% | n8n-io, n8n | n8n before 1.123.73, 2.35.4, and 2.36.2 contains a credential exposure vulnerability in the Strapi, SeaTable, and Mailcheck nodes. These nodes send their decrypted credentials to the authentication endpoint via the raw legacy HTTP helper outside any error handling, causing the plaintext secret to be persisted in execution error data. Any authenticated user can read the plaintext secret from their own execution through the REST API, bypassing the blank-value redaction enforced by the credentials API. | Thu 29 Oct |
| CVE-2025-71391 | 7.1 high | 1.0% | surrealdb | SurrealDB versions before 2.2.2 contain an uncaught exception vulnerability in the net module that allows authenticated users to crash the database. Attackers can send crafted HTTP queries containing null bytes to the /sql endpoint, causing an unhandled exception that crashes the SurrealDB instance and any dependent applications. | Thu 29 Oct |
| CVE-2024-58380 | 7.1 high | 1.0% | no CPE yet | PocketMine-MP versions before 5.11.2 contain a denial of service vulnerability in BookEditPacket handling that crashes the server when an invalid inventory slot value is provided. Attackers can send a crafted BookEditPacket with an inventory slot greater than 35 to trigger an unhandled exception and crash the server. | Tue 27 Oct |
| CVE-2026-8619 | 7.1 high | 1.0% | tp-link, tl-mr100_firmware, archer_mr600_firmware, tl-mr150_firmware | An unauthenticated denial-of-service vulnerability was identified in TP-Link TL-MR100 v3.2, TL-MR150 v3.2, TL-MR6400 v8.0 and Archer MR600 v2, due to improper handling of exceptional request conditions that may lead to a NULL pointer dereference. A remote attacker on an adjacent network can send a specially crated HTTP request to trigger a crash of the HTTP service process. Successful exploitation may cause the HTTP service to crash, making the web management interface and HTTP-dependent functionality temporarily unavailable. | Tue 27 Oct |
| CVE-2026-65607 | 7.1 high | 1.0% | no CPE yet | SiYuan before v3.7.2 contains a path traversal vulnerability in the /export/temp/ short-circuit branch of the serveExport handler (kernel/server/serve.go). Unlike the main export branch, this branch joins the raw, percent-decoded request path with util.TempDir and serves the file without the IsSubPath or IsSensitivePath checks added in the earlier export-disclosure hardening (GHSA-6865-qjcf-286f). An authenticated attacker can send percent-encoded traversal sequences (e.g. /export/temp/%2e%2e/.../etc/passwd, where %2e%2e is decoded to '..') to read arbitrary files outside TempDir, including /etc/passwd, SSH keys (~/.ssh/*), and SiYuan workspace *.db and *.log files, bypassing the sensitive-file protection. | 24 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.