Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-89477 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference. KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ> A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites. | 19 Oct |
| CVE-2026-89476 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: fix stream->outcnt underflow on duplicate RECONF responses A cached RECONF chunk may contain more than one request parameter. A duplicate response can therefore find and process the same ADD_OUT request again while another parameter is still outstanding, rolling back outcnt twice and possibly underflowing it. Track outstanding request types as bits and clear each bit after its first response. Later responses for the same request are then ignored. | 19 Oct |
| CVE-2026-61704 | 7.5 high | 1.0% | no CPE yet | Link Preview JS extracts web links information. Prior to 4.0.4, the resolveDNSHost mitigation in index.ts validates one resolved IP address but fetches the original hostname, allowing an attacker-controlled DNS server to return a public address during validation and a loopback or internal address during the final connection. This DNS rebinding condition bypasses the SSRF protection and can cause the server-side preview fetch to reach internal HTTP resources. Redirect handling is affected by the same validation-to-fetch mismatch. This issue is fixed in version 4.0.4. | 18 Oct |
| CVE-2026-80527 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ] | 16 Oct |
| CVE-2026-74717 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, return NULL on create error Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- | 16 Oct |
| CVE-2026-74626 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_netdev: Preserve RX queue depth on allocation failure ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as soon as memory is available again. | 16 Oct |
| CVE-2026-74576 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/slab: prevent unbounded recursion in free path with new kmalloc type Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab") avoided recursive allocation of obj_exts from kmalloc caches of the same size, by bumping the obj_exts array's allocation size whenever the array size equals the size of the object being allocated. However, as reported by Danielle Costantino and Shakeel Butt, even slabs from kmalloc caches of different sizes can form a cycle by allocating obj_exts arrays from each other [1]: What happened: a KMALLOC_NORMAL slab's obj_exts array (used by allocation profiling / memcg accounting) is itself kmalloc()'d from a KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array" relation can form cycles. With sizeof(struct slabobj_ext) == 16 and the host's geometry: - kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes, served from kmalloc-1k; - kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes, served from kmalloc-512. A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's obj_exts array. Discarding one frees the other's array, which empties and discards that slab, which frees the first's array, and so on: __free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() -> __free_slab() recurses along the cycle until the stack is exhausted. With memory allocation profiling, this allows unbounded recursion in the free path and led to a stack overflow on a production host in the Meta fleet [1]: BUG: TASK stack guard page was hit Oops: stack guard page RIP: 0010:kfree+0x8/0x5d0 Call Trace: __free_slab+0x66/0xc0 kfree+0x3f0/0x5d0 ... ( ~125x __free_slab <-> kfree ) ... <kernel driver freeing a resource> do_syscall_64 It is proposed [1] to resolve this issue by always serving the obj_exts array allocation from kmalloc caches (or large kmalloc) of sizes larger than the object size. However, as pointed out by Vlastimil Babka [2], this can waste an excessive amount of memory as slabs from large kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much smaller than the object size. Therefore, rather than bumping the size, let us take a different approach; disallow formation of cycles between kmalloc types when allocating obj_exts arrays. Currently, all obj_exts arrays are served from normal kmalloc caches. Cycles cannot be created if obj_exts arrays of normal kmalloc caches are served from a special kmalloc type that can never have obj_exts arrays. To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT. KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when either 1) memory allocation profiling is not permanently disabled, or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are aliased with KMALLOC_NORMAL. Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred because allocation of a barn can trigger obj_exts array allocation of normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size is not ready yet. For simplicity, perform bootstrapping of sheaves for all kmalloc caches later. Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent allocation of obj_exts arrays, and let kmalloc_slab() override the type to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains unchanged because kmalloc_flags() bypasses the kmalloc fastpath. Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when the objects are allocated from normal kmalloc caches. While this prevents unbounded recursive allocation of obj_exts, it allows KMALLOC_NO_OBJ_EXT caches to have sheaves. Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents allocation of both sheaves and obj_exts arrays, the recursion depth is bounded. obj_exts arrays for non- ---truncated--- | 16 Oct |
| CVE-2026-72464 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | 16 Oct |
| CVE-2023-54004 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 ---truncated--- | 15 Oct |
| CVE-2026-46110 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. | 15 Oct |
| CVE-2026-31711 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | 15 Oct |
| CVE-2026-27135 | 7.5 high | 1.0% | nghttp2 | nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. | 15 Oct |
| CVE-2026-78659 | 7.5 high | 1.0% | no CPE yet | When "Trailer" headers are sent by a client, the HTTP server internally uses the header values to populate the Request.Trailer map passed to the server handler. Because Request.Trailer is a map, each entry incurs memory overhead. For HTTP/2 servers, a malicious client can exploit this by sending a "Trailer" header that declares a large number of fields, causing the server to allocate a disproportionate amount of memory while bypassing Server.MaxHeaderValueCount and Server.MaxHeaderBytes limits. This exploit is not applicable for HTTP/1 servers, which do not support multiplexing a large number of requests over one TCP connection, and whose Server.MaxHeaderBytes are calculated differently. | 9 Oct |
| CVE-2026-18453 | 7.5 high | 1.0% | no CPE yet | A flaw was found in 389 Directory Server. A missing NULL pointer check in the paged results handling of op_shared_search allows an unauthenticated remote attacker to crash the LDAP server by sending a crafted sequence of search requests using the USE_ONE_BACKEND control, resulting in denial of service. | 8 Oct |
| CVE-2026-84784 | 7.5 high | 1.0% | openssl | Issue summary: A malicious remote peer may flood the local QUIC stack with NEW_CONNECTION_ID frames by avoiding a limit check on how many connection IDs the remote QUIC stack can use. Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID frame is dispatched via the Control Frame Queue (CFQ). If the remote peer also withholds ACKs, then it can force the local stack to allocate ~400MB (depending on ACK delay). CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism by which a remote peer can notify the local QUIC stack to change the destination connection ID (a.k.a. CID) the local stack uses to identify the connection at the remote peer. Each CID is associated with a sequence number. The sequence number is transmitted in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID which is being either associated with a connection or retired. The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know a new CID is being associated with an existing connection. The NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the retire-prior-to number. The retire-prior-to identifies existing CIDs that are to be retired. The local QUIC stack must send a RETIRE_CONNECTION_ID for every destination CID whose sequence number is less than retire-prior-to. The CID becomes retired after the local stack receives an ACK for its RETIRE_CONNECTION_ID frame. Although the OpenSSL QUIC stack supports at most one destination CID for every connection, it can be tricked into processing more than one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC stack currently retires the destination CID as soon as it receives the NEW_CONNECTION_ID, while in fact the destination CID must be retired after an ACK for the RETIRE_CONNECTION_ID frame is received. Correcting the flawed logic also fixes the backlog growth. [1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary. | 8 Oct |
| CVE-2026-57574 | 7.4 high | 1.0% | no CPE yet | Misskey is an open source, federated social media platform. Prior to 2026.6.0, Misskey contains a vulnerability in Time-based One-Time Password (TOTP) authentication in UserAuthService where insufficient validation of used tokens allows the reuse of a single-use code within its valid time step. If both credentials and a TOTP code are obtained concurrently, an attacker may reuse the code to perform unauthorized actions, potentially leading to account takeover. This issue is fixed in version 2026.6.0. | Sun 25 Oct |
| CVE-2026-48079 | 7.4 high | 1.0% | no CPE yet | OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.2, when a user navigates to the `/logout` page, the page's server-side load handler deletes the `access_token` cookie before calling `/api/auth/logout` via an internal `event.fetch()`. The internal fetch consequently runs without the auth cookie, so `apiAuthHandle` rejects it, the logout handler never executes, and `SessionService.revokeSession()` is never called for the current session. The DB session row remains valid until its natural expiry (one week by default). The user sees a successful logout (cookie gone, UI returns to login), but any party still holding a copy of the now-deleted access token can continue making authenticated API calls until the session naturally expires. The root cause is a simple ordering mistake. The same auth subsystem implements the correct order in `/api/auth/logout`: revoke the current DB session first, then delete the cookie. The page-level wrapper does the opposite. Version 1.0.2 initiates server-side logout before removing authentication cookies and first appears in version 1.0.2. Version 2.0.0 later replaces this with a race-free client-side logout flow. | 23 Oct |
| CVE-2024-35888 | 7.3 high | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb->head syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0 | 15 Oct |
| CVE-2026-7829 | 7.2 high | 1.0% | uvnc, ultravnc | UltraVNC repeater through 1.8.2.2 contains a post-authentication out-of-bounds write in the allow/deny rule parser. In repeater/webgui/settings.c:225-272, after strncpy_s copies a rule token into temp1[rule1] (25-byte destination) or temp2/temp3 (16-byte destination), the code unconditionally writes a NUL terminator at temp1[rule1][len] = 0 without clamping len to the destination size. When an authenticated administrator saves a rule with a token length equal to or greater than the destination size, the NUL byte is written one or more bytes past the end of the stack-allocated array, corrupting adjacent stack data. An attacker who has obtained admin credentials (including via CVE-2026-7839 default password) can trigger this to gain code execution on the repeater host. | Sun 25 Oct |
| CVE-2026-58660 | 7.2 high | 1.0% | no CPE yet | Kanboard through 1.2.52, fixed in commit 564cc30, BoardAjaxController save() method (used by the kanban board drag-and-drop endpoint) validates the caller's role on the attacker-supplied project_id but never verifies that the supplied task_id actually belongs to that project. Because task identifiers are sequential integers shared across the entire instance, any authenticated user who is a member of at least one project can enumerate and move (corrupt/hide) tasks belonging to any other project on the same instance, including private projects they have no membership or role on. | 8 Oct |
| CVE-2026-57520 | 7.1 high | 1.0% | bitwarden, server | Bitwarden Server before 2026.5.0 contains a privilege escalation vulnerability that allows authenticated Custom users with ManageUsers permission to remove Admin accounts from an organization by exploiting a missing role hierarchy check in the bulk user-remove endpoint. Attackers can supply Admin organization-user IDs in a bulk DELETE request to bypass the guard enforced on the single-user removal path, effectively removing one or more Admin accounts from an organization. | Sun 25 Oct |
| CVE-2022-49407 | 7.1 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated--- | 15 Oct |
| CVE-2026-56787 | 6.9 medium | 1.0% | rtklib | RTKLIB through 2.4.3 contains an off-by-one out-of-bounds read vulnerability in the decode_ssr3 function at src/rtcm3.c:1446 that allows remote attackers to trigger a global buffer overflow via crafted RTCM3 SSR messages with attacker-controlled signal mode fields. Remote attackers can exploit this vulnerability by sending malicious SSR correction streams over NTRIP or serial connections to cause denial of service or crash RTKLIB rovers and CORS servers. | Sun 25 Oct |
| CVE-2026-56814 | 6.9 medium | 1.0% | no CPE yet | Plug.Parsers.MULTIPART, the multipart request-body parser used to handle file uploads and multipart forms, does not enforce its :length budget against all consumed resources, allowing an unauthenticated remote attacker to cause denial of service. The parser charges the :length limit only for part body bytes; part header bytes are never counted, and a part with an empty body costs zero. Because every part whose Content-Disposition carries a non-empty filename creates a fresh temporary file (via Plug.Upload) and retains a Plug.Upload struct for the duration of the request, an attacker can send a single request composed of many empty-body file parts. Such a request stays well under the configured :length limit (8,000,000 bytes by default) while creating one temporary file per part, leading to inode and disk exhaustion and unbounded memory growth. Any application using Plug.Parsers with the :multipart parser is affected, and no authentication is required, only reachability of a multipart endpoint over HTTP. This vulnerability is associated with program files lib/plug/parsers/multipart.ex and program routines Plug.Parsers.MULTIPART.parse_multipart/2, Plug.Parsers.MULTIPART.parse_multipart_headers/5, Plug.Parsers.MULTIPART.parse_multipart_body/4, and Plug.Parsers.MULTIPART.parse_multipart_file/4. This issue affects plug: from 1.4.0-rc.0 before 1.16.6, from 1.17.0 before 1.17.4, from 1.18.0 before 1.18.5, from 1.19.1 before 1.19.5, and from 1.20.0 before 1.20.3. | Sat 24 Oct |
| CVE-2026-48025 | 6.9 medium | 1.0% | no CPE yet | nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.7, internal/pki/resolver.go:36-64 constructs a CAManager with the plaintext ed25519.PrivateKey after unwrapping via the master key; internal/pki/ca.go:13-16 stores it. Callers at internal/api/enroll.go:116, internal/api/updates.go:297, and internal/api/mobile_bundle.go:40 use the manager for one Sign() and drop the reference on function return — but the underlying slice contents are not wiped before release. The keystore package's contract (internal/keystore/keystore.go doc: "Callers MUST zeroise the returned plaintext DEK as soon as it is no longer needed") is not met by the CAManager consumer. Decrypted CA private keys persist in process heap until Go's GC scavenges the underlying slice — minutes to hours under load, indefinitely on idle servers. This issue has been patched in version 0.3.7. | 23 Oct |
| CVE-2026-112273 | 6.9 medium | 1.0% | no CPE yet | libtins through 4.6 contains a heap out-of-bounds read vulnerability in DNS::compose_name in src/dns.cpp that allows remote attackers to read past the packet buffer by sending a label ending exactly at the packet end. Attackers can deliver crafted DNS packets whose additional, answer, or authority records trigger a one-byte read when parsed, crashing applications on hardened allocators. | 22 Oct |
| CVE-2026-75484 | 6.9 medium | 1.0% | no CPE yet | Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in mtrudel bandit allows an unauthenticated remote attacker to smuggle CR, LF, or NUL characters into application-visible request headers via HTTP/2. Bandit.HTTP2.Stream.read_headers/1 validates pseudo-header placement and uniqueness, header-name casing, connection-specific headers, the te value, and content-length, but never checks field values. Because HPACK carries arbitrary octets, a HEADERS block whose field values contain \r, \n, or \0 decodes without error and the values land in conn.req_headers unchanged. The HTTP/1 path already rejects the same octets; HTTP/2 did not. Bandit itself is not a sink for the injected bytes: its own logging uses fixed strings or inspect, and HTTP/2 response headers are HPACK-encoded and separately rejected by Plug's put_resp_header, so response splitting is not reachable through this path. The risk is entirely in how a downstream application consumes header values, such as appending one verbatim to a plain-text log or concatenating it into an upstream request. A related gap bundled in the same fix: only :method, :scheme, and :path were checked for at most one occurrence; a duplicate :authority pseudo-header was accepted, with the first instance silently winning as conn.host while a conflicting value remained visible to the application. This issue affects bandit: from 1.4.0 before 1.12.5. | 18 Oct |
| CVE-2026-94416 | 6.8 medium | 1.0% | no CPE yet | An authorization bypass was found in the Ansible Automation Platform (AAP) gateway. The gateway API allows an authenticated administrator to create a new service key for the Controller service cluster. Because service-key creation is not restricted to the installer-provisioned provisioning path, an administrator-issued key is cryptographically indistinguishable from a legitimate one and can be used to forge a service-authentication token that impersonates the Controller service. Combined with the gateway OIDC workload-identity endpoint (enabled via FEATURE_OIDC_WORKLOAD_IDENTITY_ENABLED), the attacker can drive the gateway to sign Workload Identity Tokens (WITs) for arbitrary Controller workloads. A downstream resource server such as HashiCorp Vault that trusts the gateway OIDC key will accept the forged WIT and return the AAP credentials bound to that workload, disclosing secrets beyond the attacker's authorization boundary. | 21 Oct |
| CVE-2026-16959 | 6.8 medium | 1.0% | no CPE yet | The Media Library Assistant WordPress plugin before 3.40 does not validate a search parameter before concatenating it into a SQL query in one of its media-library query handlers, allowing users with the Author role to perform SQL injection. | 18 Oct |
| CVE-2023-4273 | 6.7 medium | 1.0% | linux, fedoraproject, linux_kernel, fedora, enterprise_linux | A flaw was found in the exFAT driver of the Linux kernel. The vulnerability exists in the implementation of the file name reconstruction function, which is responsible for reading file name entries from a directory index and merging file name parts belonging to one file into a single long file name. Since the file name characters are copied into a stack variable, a local privileged attacker could use this flaw to overflow the kernel stack. | 14 Oct |
| CVE-2026-50497 | 6.5 medium | 1.0% | microsoft, windows 10 version 1607, windows 10 version 1809, windows 10 version 21h2 | Off-by-one error in Windows Remote Desktop Protocol allows an unauthorized attacker to disclose information over a network. | Wed 28 Oct |
| CVE-2026-23863 | 6.5 medium | 1.0% | An attachment spoofing issue in WhatsApp for Windows prior to v2.3000.1032164386.258709 could have allowed maliciously formatted documents with embedded NUL bytes in the filename to be shown in the application as one type of file but run as an executable when opened. We have not seen evidence of exploitation in the wild. | Mon 26 Oct | |
| CVE-2026-68555 | 6.5 medium | 1.0% | no CPE yet | Coturn is a free open source implementation of TURN and STUN Server. In 4.15.0, an authenticated TURN user can repeatedly resume one allocation from fresh UDP 5-tuples without completing a handoff when the server enables --mobility. mobile_begin_transition() in src/server/ns_turn_server.c disarms each new session's allocation timeout and overwrites the allocation's single mobile_pending_resume link, leaving earlier pending sessions unreachable by the cleanup path, while copy_auth_parameters() ignores inc_quota() failure. The attacker can therefore retain unbounded server-side sessions and exhaust process memory even when --user-quota=1 is configured. This issue is fixed in version 4.16.0. | Mon 26 Oct |
| CVE-2026-49296 | 6.5 medium | 1.0% | apache, airflow | Before apache-airflow 3.3.0, a user authorized to read one Dag could disclose the source of other Dags co-located in the same source file. `GET /api/v2/dagSources/{dag_id}` — and the equivalent Dag-source view in the UI — returned the entire source file without redacting Dags the caller was not authorized to read, bypassing per-DAG read authorization. Deployments that co-locate multiple Dags in a single file and rely on per-DAG access control to limit source visibility are affected; single-Dag-per-file deployments are not. Upgrade to apache-airflow 3.3.0 or later. | Sun 25 Oct |
| CVE-2026-68872 | 6.5 medium | 1.0% | apache, apache-airflow-providers-amazon | The AWS Systems Manager Parameter Store and Secrets Manager backends in Apache Airflow's Amazon provider resolved a team-scoped Connection or Variable id through the team-agnostic lookup when the team-scoped lookup missed. In a deployment running multi-team mode with either backend, a caller in one team could resolve a secret belonging to another team by supplying an id that spells out that team's namespace, obtaining its credentials in full. No unusual configuration is required beyond enabling multi-team mode and using one of these backends. Users are advised to upgrade to apache-airflow-providers-amazon 9.34.0 or later, which refuses the team-agnostic fall-through for an id that could name a team namespace. | Sat 24 Oct |
| CVE-2026-68868 | 6.5 medium | 1.0% | apache, apache-airflow-providers-google | The Google Cloud Secret Manager secrets backend in Apache Airflow's Google provider never applied the team scope when resolving Connections and Variables: the caller's `team_name` was accepted by the backend but dropped at the internal call boundary, so every lookup resolved against the team-agnostic secret name. In a deployment running multi-team mode with this backend, a task or Dag belonging to one team resolved another team's Connection or Variable, obtaining its credentials in full. No unusual configuration is required beyond enabling multi-team mode and using this backend. Users are advised to upgrade to apache-airflow-providers-google 22.3.0 or later, which builds and applies the team-scoped secret name. | Sat 24 Oct |
| CVE-2026-45812 | 6.5 medium | 1.0% | apache, nimble | Incorrect Calculation of Buffer Size vulnerability in Apache NimBLE when processing Legacy Advertising Report HCI event. When a single HCI advertising report event bundles multiple reports, NimBLE miscalculated the offset to the next report. This can cause the host to read past the end of the buffer and deliver a GAP event with bogus data to the application. Severity is low: NimBLE's own controller never batches multiple reports into one event, so this only matters when NimBLE's host is paired with a third-party controller that does. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue. | Sat 24 Oct |
| CVE-2025-58162 | 6.5 medium | 1.0% | opensecurity, mobile_security_framework | MobSF is a mobile application security testing tool used. In version 4.4.0, an authenticated user who uploaded a specially prepared one.a, can write arbitrary files to any directory writable by the user of the MobSF process. This issue has been patched in version 4.4.1. | 19 Oct |
| CVE-2026-33994 | 6.3 medium | 1.0% | locutus | Locutus brings stdlibs of other programming languages to JavaScript for educational purposes. Starting in version 2.0.39 and prior to version 3.0.25, a prototype pollution vulnerability exists in the `parse_str` function of the npm package locutus. An attacker can pollute `Object.prototype` by overriding `RegExp.prototype.test` and then passing a crafted query string to `parse_str`, bypassing the prototype pollution guard. This vulnerability stems from an incomplete fix for CVE-2026-25521. The CVE-2026-25521 patch replaced the `String.prototype.includes()`-based guard with a `RegExp.prototype.test()`-based guard. However, `RegExp.prototype.test` is itself a writable prototype method that can be overridden, making the new guard bypassable in the same way as the original — trading one hijackable built-in for another. Version 3.0.25 contains an updated fix. | Mon 26 Oct |
| CVE-2026-114216 | 6.3 medium | 1.0% | no CPE yet | Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to smuggle a second request past a front-end proxy via a chunk extension that contains a bare LF. The chunked reader in lib/bandit/http1/socket.ex takes the chunk-size line to be everything up to the first CRLF and discards everything after ; without checking it against the RFC 9112 chunk-ext grammar, so bare LF, bare CR and other control bytes pass. A proxy that ends the size line at a bare LF reads 2;\nxx\r\n40\r\n... as one request whose second chunk holds a GET /admin, while Bandit ends the body early and dispatches GET /admin as a separate pipelined request. Deployments without such a proxy in front of Bandit are not affected. This issue affects bandit: from 1.12.4 before 1.14.0. | Mon 26 Oct |
| CVE-2026-59246 | 6.3 medium | 1.0% | no CPE yet | Allocation of resources without limits vulnerability in elixir-mint mint allows a remote HTTP/2 server to exhaust memory on the client host and cause a denial of service. The Mint.HTTP2.handle_continuation/3 function in lib/mint/http2.ex accumulates the header-block fragment carried by each HTTP/2 CONTINUATION frame into a growing conn.headers_being_processed nesting, one level deeper per frame, and only releases it when a frame with the END_HEADERS flag arrives. The only guard on this accumulator is Mint.HTTP2.assert_header_block_within_max_size/2, which sums the byte size of the fragments received so far. Because a CONTINUATION frame is permitted by the protocol to carry a zero-length payload, an unbounded chain of zero-length CONTINUATION frames adds no bytes to the running total, never trips the size cap, and never emits END_HEADERS, yet each frame still nests the accumulator one level deeper. A malicious HTTP/2 server (reachable directly, via an attacker-controlled redirect, via SSRF, or via a man-in-the-middle) can open a stream by sending a HEADERS frame without END_HEADERS and then stream zero-length CONTINUATION frames indefinitely. Client memory grows one cons cell per frame received; sustained bandwidth from the peer drives the BEAM node running the Mint client to memory exhaustion and eventual out-of-memory termination. This issue affects mint: from 0.1.0 before 1.9.2. | Sat 24 Oct |
| CVE-2026-59249 | 6.3 medium | 1.0% | no CPE yet | Inconsistent interpretation of HTTP requests (HTTP response smuggling) vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize a strict intermediary and the Mint client on the same pooled connection, enabling response-queue poisoning against subsequent requests that share the connection. The Mint.HTTP1.decode_body/5 function in lib/mint/http1.ex parses the chunk-size line of a Transfer-Encoding: chunked response with Integer.parse(data, 16). RFC 7230 defines chunk-size = 1*HEXDIG and forbids any sign prefix, but Integer.parse/2 accepts an optional leading + or -. A chunk-size line of +5 is accepted as a five-byte chunk; lines of +0 and -0 are accepted as the terminating zero-length chunk and end the message body early. An RFC-strict intermediary in the response path rejects these forms, so the intermediary and the Mint client disagree on where one response ends and the next begins. On a pooled keep-alive connection, an attacker-influenced origin can inject bytes that the client attributes to the next legitimate response on the same connection, poisoning the response queue and corrupting the responses returned to unrelated in-flight requests. This issue affects mint: from 0.1.0 before 1.9.3. | Sat 24 Oct |
| CVE-2026-64646 | 6.3 medium | 1.0% | vercel, next.js | Next.js is a React framework for building full-stack web applications. In versions 13.0.0 through 15.5.20 and 16.0.0 through 16.2.10, requests targeting Next.js applications using App Router with at least one Server Action can lead to excessive memory consumption if that Server Actions uses the Edge runtime. This issue has been fixed in versions 15.5.21 and 16.2.11. | Sat 24 Oct |
| CVE-2026-105298 | 6.3 medium | 1.0% | no CPE yet | Summary Before version 0.9.0, Pingora accepted HTTP/2 requests whose Host header differed from the :authority pseudo-header. Request filters, cache keys, and logs that read the request URI (session.req_header().uri) saw the :authority value, but the upstream received the client-supplied Host value. Pingora also accepted :authority values containing userinfo (for example, [email protected]). This violates RFC 9113 Section 8.3.1, which requires an intermediary to use the :authority value for Host and replace any existing Host field. Root cause * HTTP/2 to HTTP/1.1: Host was generated from :authority only when the request had no Host header, so a conflicting client Host was forwarded unchanged. * HTTP/2 to HTTP/2: the client Host header was removed and used to overwrite the upstream :authority, after request filters had already run against the original :authority. * The HTTP/2 server did not compare Host with :authority and did not reject userinfo in the authority. Impact A remote, unauthenticated attacker can send a single HTTP/2 request that the application sees as one host and the upstream receives as another. Where request filters, access controls, or cache keys use the URI authority and the upstream routes by Host, this can lead to: * Cache poisoning: a response from another virtual host is stored under the victim host's cache key and served to other users (this also requires the upstream to serve different content per Host). * Host-based access control bypass: a request approved for one host is served by a different virtual host on the upstream. Deployments that do not accept HTTP/2 from clients, or that do not use the request authority for security or caching decisions, are not affected. Note that Cloudflare CDN customers were unaffected, as internal Pingora services at Cloudflare do not have HTTP/2 clients. Mitigation: * Upgrade to pingora 0.9.0 or later. Pingora now returns 400 Bad Request for HTTP/2 requests whose Host differs from :authority, that contain more than one Host, or whose authority contains userinfo, and keeps the upstream Host or :authority consistent with the request authority. Fix commits: https://github.com/cloudflare/pingora/commit/915590a91811877795531f6ba0927a3138b5cb4b , https://github.com/cloudflare/pingora/commit/ffab8302d08d4292d1924eb8fe84647fd5cb8e76 * If you cannot upgrade: in request_filter, reject HTTP/2 requests that carry a Host header different from the URI authority, or whose authority contains '@'. | 20 Oct |
| CVE-2026-63430 | 6.3 medium | 1.0% | no CPE yet | ammonia is a Rust library for repairing and securing untrusted HTML. Prior to 3.3.2, 4.0.2, and 4.1.3, applications that explicitly allow the math tag, annotation-xml, and at least one raw-text HTML element while disallowing the encoding attribute can permit mutation cross-site scripting. ammonia does not correctly implement annotation-xml's encoding-dependent MathML integration-point behavior after attribute filtering removes encoding, so the sanitizer validates a descendant under one namespace interpretation while the browser reparses the output under another. An attacker can use that namespace transition and an allowed raw-text HTML element to execute JavaScript when a user renders the sanitized output. The required tags are not enabled by default, so applications that do not explicitly allow them are not affected. This issue is fixed in versions 3.3.2, 4.0.2, and 4.1.3. | 16 Oct |
| CVE-2026-77761 | 6.3 medium | 1.0% | no CPE yet | A parser state isolation vulnerability in misp-stix could cause data from a previously processed STIX document to be retained and incorporated into the MISP event generated from a subsequent document when the same parser instance is reused. Several STIX 1 and STIX 2 parser components maintained per-document state that was not completely cleared between conversions. In the STIX 2 parser, galaxy and galaxy-cluster information, including custom galaxy clusters, could survive a parser reset and subsequently be associated with objects from another bundle. The STIX 1 parsers were affected by the same underlying state-management issue. Depending on the parser type, retained information could include galaxies, references, passive DNS bookkeeping, package titles, dates, and timestamps. As a result, parsing a second STIX package with an already-used parser could produce a MISP event containing information that was present only in the previously processed package. For example, a generated event could inherit passive DNS records from an earlier document, reference unrelated galaxy information, combine titles from different packages, or use timestamps originating from another conversion. The issue primarily affects applications using the misp-stix API directly and reusing parser instances across independent STIX documents. Normal conversion entry points that instantiate a new parser for each file are not affected by this particular reuse scenario. An attacker able to influence documents processed by such a long-lived parser could potentially cause information from one conversion to contaminate a subsequent MISP event. This can affect the integrity of generated threat intelligence, resulting in incorrect associations, misleading contextual information, or unrelated indicators being attributed to an event. In environments where consecutive documents have different access controls or distribution scopes, the retained state could additionally result in limited disclosure of information from a previously processed document. Successful exploitation depends on the consuming application reusing the same parser instance and on the ordering of processed documents, which increases attack complexity. No direct availability impact or code execution is involved. | 16 Oct |
| CVE-2026-17431 | 6.1 medium | 1.0% | no CPE yet | PDF::WebKit versions through 1.2 for Perl allow OS command injection via a 2-arg open() of the output path in to_pdf and of stylesheet paths in _style_tag_for. to_pdf reads the generated PDF back from its path argument, and _style_tag_for reads each entry of the stylesheets list, by assigning the path to a local @ARGV and reading it with the diamond operator, which opens each @ARGV element with Perl's 2-arg open(). A value that begins or ends with a pipe ("| cmd", "cmd |") is run as a command rather than opened as a file, and one that begins with a redirect ("> path", ">> path") opens that path for write or append. to_file forwards its path argument to to_pdf and reaches the same read. Any caller that forwards untrusted input as the output path or as a stylesheets entry can run a command under the process UID; with the "cmd |" form the command's output is returned in place of the PDF, and with the "> path" form the named file is truncated. Stylesheets may only be added to an HTML source, so a URL or file source exposes the output path alone. | 23 Oct |
| CVE-2023-6717 | 6.0 medium | 1.0% | no CPE yet | A flaw was found in the SAML client registration in Keycloak that could allow an administrator to register malicious JavaScript URIs as Assertion Consumer Service POST Binding URLs (ACS), posing a Cross-Site Scripting (XSS) risk. This issue may allow a malicious admin in one realm or a client with registration access to target users in different realms or applications, executing arbitrary JavaScript in their contexts upon form submission. This can enable unauthorized access and harmful actions, compromising the confidentiality, integrity, and availability of the complete KC instance. | Tue 27 Oct |
| CVE-2026-66071 | 6.0 medium | 1.0% | broadcom, rabbitmq_server | RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. | 15 Oct |
| CVE-2020-27171 | 6.0 medium | 1.0% | linux, fedoraproject, linux_kernel, fedora, debian_linux | An issue was discovered in the Linux kernel before 5.11.8. kernel/bpf/verifier.c has an off-by-one error (with a resultant integer underflow) affecting out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory, aka CID-10d2bb2e6b1d. | 8 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.