Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
CVSS unscored ×
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-99171 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs3: free the sbi after a grace period If the "nocase" mount option ntfs3 uses custom hash and dentry compare functions. Both access ntfs3 superblock private information in rcu pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any rcu delay. A lookup that's still inside the filesystem when the last reference to the mount is dropped causes a UAF. With a pathwalk held up in ntfs_d_hash() while the last reference to the mount goes away: BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940 Read of size 8 at addr ff1100010453c850 by task walker/99 Call Trace: <TASK> ntfs_nls_to_utf16+0x752/0x940 ntfs_d_hash+0x22b/0x500 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 95: __kmalloc_cache_noprof+0x249/0x560 ntfs_init_fs_context+0x2db/0x5a0 alloc_fs_context+0x52e/0xc70 [...] Freed by task 98: kfree+0x1db/0x5b0 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 task_work_run+0x131/0x250 The bug is currently masked by the grace period in namespace_unlock() for umount(2). Keep the necessary information until the filesystem private info is freed and free it with an rcu delay. ntfs3_free_sbi() now runs from an rcu callback and drops the upcase table via ntfs_put_shared(). So switch s_shared_lock over to spin_lock_bh(). Otherwise the callback can deadlock against a task holding the lock on the same cpu. | Fri 30 Oct |
| CVE-2026-99169 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: futex: Fix mm reuse handling for FUT_OFF_MMSHARED A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) | Fri 30 Oct |
| CVE-2026-99166 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] | Fri 30 Oct |
| CVE-2026-99165 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | Fri 30 Oct |
| CVE-2026-99161 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released. | Fri 30 Oct |
| CVE-2026-99160 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | Fri 30 Oct |
| CVE-2026-99159 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx() On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[] shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma() dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader() writes two such indices into meta->buffers[], which rb_cpu_meta_valid() would reject on the next boot, discarding the previous boot's trace. A CPU's sub-buffer array starts after its meta header and the nr_subbufs integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx() inverts that calculation but skips only the integers, not the header, so its base is one sub-buffer low whenever the omitted header size crosses the alignment boundary. Invert the calculation with rb_subbufs_from_meta() rather than repeating it. rb_range_buffer() maps an index back to an address through the same helper, so the two directions can no longer disagree. | Fri 30 Oct |
| CVE-2026-99158 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix false warning in ring_buffer_map_get_reader() The mmap reader can warn when it catches up with a writer that is still committing events. rb_get_reader_page() returns NULL in this case, but ring_buffer_map_get_reader() treats that result as an error. The initial rb_per_cpu_empty() check filters out an empty buffer, but it does not guarantee that the next reader page has committed data. Writers do not take reader_lock and can advance commit_page before publishing the committed length on the new page. rb_get_reader_page() can swap to that page, catch up with the writer and return NULL. Handle NULL through the existing no-data exit without warning. Remove the caller's reader_page == commit_page check as well, since the reader-page helper already handles that case. The existing metadata update and return path remain in place. | Fri 30 Oct |
| CVE-2026-99157 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. | Fri 30 Oct |
| CVE-2026-99155 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: xen/scsifront: Check for a NULL shadow entry on a backend response scsifront_do_response() validates the rqid in a backend response against VSCSIIF_MAX_REQS before using it to index info->shadow[], but then dereferences the entry to test ->inflight without checking that the slot is populated. Shadow slots are NULL before a command is submitted (the host private area is zeroed at allocation) and are reset to NULL in _scsifront_put_rqid() once a request completes, so an in-range rqid that does not correspond to an outstanding request makes the frontend dereference a NULL pointer. A malicious or buggy backend can thus crash the guest by returning a response whose rqid is in range but not in flight -- for example a spurious response before any command has been issued, or a duplicate of one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots, so before the first command every in-range rqid selects a NULL slot. Reject a response whose shadow slot is not populated. | Fri 30 Oct |
| CVE-2026-99150 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr amdgpu_debugfs_gpr_read() drops its runtime PM reference right after reading the wave registers. When copying them to userspace fails, it jumps to the err label, which drops the reference a second time. A read into a bad buffer on Navi31 either steals a reference somebody else holds (power/runtime_usage goes from 1 to 0) or underflows the count: amdgpu 0000:03:00.0: Runtime PM usage count underflow! The registers are already in the kernel buffer at that point, so finish the hardware access first and copy the buffer with a single copy_to_user() instead of the put_user() loop with its own error path. (cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) | Fri 30 Oct |
| CVE-2026-99147 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/exec: don't immediately add prelocked obj to array of locked objs When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop. | Fri 30 Oct |
| CVE-2026-99140 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix hist trigger timestamps for buffered events Syzkaller triggered a WARN_ON_ONCE(!nest) warning: WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp Call trace: ring_buffer_event_time_stamp hist_field_timestamp hist_fn_call event_hist_trigger event_triggers_call __event_trigger_test_discard trace_event_buffer_commit do_trace_event_raw_event_sched_switch trace_event_raw_event_sched_switch The warning is probabilistically reproducible and is related to syzkaller executing the following commands: echo 'prev_pid == 999999' > events/sched/sched_switch/filter echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger The specific triggering process is as follows: CPU 0 CPU 1 (context switching) (echo 'hist:keys=common_timestamp' > \ events/sched/sched_switch/trigger) do_trace_event_raw_event_##call trace_event_buffer_lock_reserve if (!tr->no_filter_buffering_ref && trace_file->flags & EVENT_FILE_FL_FILTERED) return entry; // return directly event_hist_trigger_parse hist_register_trigger tracing_set_filter_buffering(file->tr, true); tr->no_filter_buffering_ref++; __trace_buffer_lock_reserve rb_start_commit local_inc(&cpu_buffer->committing); // skipped and not executed trace_event_buffer_commit __event_trigger_test_discard event_triggers_call event_hist_trigger hist_fn_call hist_field_timestamp ring_buffer_event_time_stamp nest = local_read(&cpu_buffer->committing); WARN_ON_ONCE(!nest) // trigger warning The root cause is that when an event file has a filter attached and the hist trigger has not yet been attached, trace_event_buffer_lock_reserve() writes the event into the per-CPU trace_buffered_event temp buffer instead of reserving it in the ring buffer, so cpu_buffer->committing is not incremented. When the event is later processed at commit time by a hist trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a zero committing count, triggering WARN_ON_ONCE(!nest). tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing: Add tracing_event_time_stamp() API") for exactly this case: if the event is the per-CPU trace_buffered_event, it returns the current ring buffer timestamp. But it never gained a caller. Use it in hist_field_timestamp(), so that a hist trigger that races onto a buffered event records the current time, which is only marginally later than when the event was recorded, instead of warning and recording a bogus timestamp. | Fri 30 Oct |
| CVE-2026-99139 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue. | Fri 30 Oct |
| CVE-2026-99138 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer. | Fri 30 Oct |
| CVE-2026-99135 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix infinite loop on discard with large tag size When integrity_metadata handles a discard, it fills a buffer with DISCARD_FILLER and writes it over the tags, max_blocks blocks at a time. If the kmalloc fails, the buffer is the on-stack array checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size is never decremented and the loop never terminates. Fix this by using sizeof(checksums_onstack) as max_size. The array has MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size"), so max_blocks is at least 1. | Fri 30 Oct |
| CVE-2026-99134 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mac802154: fix data race and NULL deref on local->assoc_dev local->assoc_dev is shared between the association path and the association-response worker without common synchronization. mac802154_perform_association() stores the coordinator pointer and waits for a response. Its timeout and error paths clear the pointer and return to mac802154_associate(), which may then free the coordinator object. Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit and enter mac802154_process_association_resp(), which dereferences assoc_dev. The worker's bit test and the handler's pointer dereference are not atomic with respect to cleanup. Cleanup can clear assoc_dev between them, causing a NULL dereference, or free the coordinator while the response handler still uses the pointer. The recorded result is exposed to the same window. assoc_status and assoc_addr are written by the handler but read by the association path while the associating bit is still set, so a second response for the same request - a malicious one, for instance - can replace them between those reads and leave the caller with an incoherent status and address pair. The response handler only needs the coordinator extended address. Replace assoc_dev with a cached address, removing the pointer lifetime dependency. Protect the cached address and the associating bit with a dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee an atomic __le64 access on all 32-bit architectures. wpan_dev->association_lock cannot be reused here: nl802154_associate() holds it across rdev_associate(), hence for the whole of mac802154_perform_association() including the wait for the response. A response handler taking that lock would only get it once the association has already given up. Reset the completion, publish the cached address, and set the associating bit while holding the lock. The response handler takes the lock, rechecks the bit and the cached address, records the response, clears the bit, and only then completes the waiter. Thus cleanup cannot pass the handler between its state check and completion, and the cached 64-bit value cannot tear. The handler clears the bit before completing, not the woken waiter: otherwise complete() is issued under the lock and a second (e.g. malicious) response can reacquire it before the waiter and replace the result. So a wait that returns success implies the bit is already clear, and the success and negative-response paths return directly. The transmit-error and timeout paths still clear it under assoc_lock, which serializes any racing response against the cleanup while the call returns the error it already selected. Both paths snapshot assoc_status and assoc_addr under the same lock. Both users run in process context, so a plain spinlock is sufficient. The lock is not held while waiting for the completion. | Fri 30 Oct |
| CVE-2026-99133 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped. | Fri 30 Oct |
| CVE-2026-99132 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. | Fri 30 Oct |
| CVE-2026-99130 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: io_uring/cancel: don't spin on local work the task can't run io_uring_cancel_generic() refuses to sleep while any ring on the exiting task's tctx has local work pending. It assumes the task is that ring's submitter and that the next io_uring_try_cancel_requests() pass will run the work. This does not hold for a ring that was still IORING_SETUP_R_DISABLED when the task got its tctx node from io_uring_create() or io_ringfd_register(). The submitter is set later by IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To the exiting task the work stays pending forever, the loop never reaches schedule(), and the task trips the WARN_ON_ONCE() once and then spins in do_exit(). An unprivileged user can set this up at will by creating a disabled ring, having a child enable it and stop, posting to the ring with IORING_OP_MSG_RING and exiting with a request in flight that only the child can complete. The exiting thread burns a CPU until the child runs or dies, and with panic_on_warn set the WARN panics the kernel. Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the task to run the work. This is reasonable since work it cannot run cannot complete any of its requests either, so nothing is lost by sleeping. Drop the WARN_ON_ONCE() since handing a disabled ring to another thread is a supported scenario, not a bug state. | Fri 30 Oct |
| CVE-2026-99128 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request. | Fri 30 Oct |
| CVE-2026-99127 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: page_pool: keep frag_offset aligned for odd-sized requests page_pool_alloc_frag_netmem() rounds the requested fragment size with size = ALIGN(size, dma_get_cache_alignment()); dma_get_cache_alignment() returns 1 unless the architecture defines ARCH_DMA_MINALIGN, which DMA-coherent architectures such as x86 do not. There the ALIGN() is a no-op and pool->frag_offset advances by the raw, unrounded size. A single caller asking for an odd size then leaves frag_offset misaligned for every fragment carved out of that page afterwards. The pool is shared, so the damage is not confined to the caller that caused it. The per-cpu system_page_pool used by generic XDP hits this. skb_pp_cow_data() allocates its fragments with the raw packet length: size = min_t(u32, len, PAGE_SIZE); truesize = size; page = page_pool_dev_alloc(pool, &page_off, &truesize); leaving frag_offset odd for whatever is carved out of that page next. Its own head allocation is already aligned -- SKB_HEAD_ALIGN(size) plus the XDP_PACKET_HEADROOM its callers pass -- so it is a later user of the shared pool that pays: page_pool_dev_alloc_va() returns a misaligned buffer, napi_build_skb() installs it as skb->head, and skb_shinfo(skb) == skb->head + skb->end is misaligned with it. skb_shinfo()->dataref is a 4-byte atomic_t at offset 0x20, so the atomic_inc() in __skb_clone() straddles a cache line. On x86 with split lock detection -- fatal for kernel split locks by default -- this panics the machine: Oops: Split lock detected RIP: 0010:skb_clone+0x154/0x1e0 Call Trace: <IRQ> raw_local_deliver+0x1ed/0x2c0 ip_protocol_deliver_rcu+0x54/0x1c0 ip_local_deliver_finish+0x85/0x100 ip_local_deliver+0x67/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 Reproduced by attaching any generic-mode XDP program to loopback and opening a RAW IPPROTO_UDP socket, which makes raw_local_deliver() clone every locally delivered UDP packet; ordinary DNS traffic then triggers it, roughly once per 2500 clones. Observed on 6.12.101 and 7.1.8. Tracing page_pool_alloc_frag_netmem() over one such run shows the amplification -- two odd-sized requests, nine misaligned offsets: requested size & 7: 0: 17035 5: 1 7: 1 frag_offset & 7: 0: 17028 3: 1 4: 1 5: 1 6: 1 7: 5 and skb_pp_cow_data() returning heads that were aligned on entry: head 0xffff8f4c86aeac00 -> 0xffff8f4c53a9a9c4 (&7=4) head 0xffff8f4d6a8a42c0 -> 0xffff8f4c4f7b7a45 (&7=5) Round the fragment size up to at least the alignment struct skb_shared_info requires, so fragments are always suitably aligned for the objects callers build on them. Architectures needing a larger DMA alignment keep it. This also makes the remainder computed in page_pool_alloc_netmem(), *size = max_size - *offset; aligned, since max_size is a power of two -- which fixes the matching misalignment of skb->end. Verified with a controlled A/B under QEMU/KVM: same tree, same config, same compiler, same rootfs and identical traffic, differing only by this patch. A SEC("xdp.frags") XDP_PASS program on lo plus UDP datagrams larger than max_head_size drives skb_pp_cow_data()'s fragment loop, which passes raw packet lengths to the pool. Measured at the return of skb_pp_cow_data(): unpatched patched skb_pp_cow_data calls 40800 40800 misaligned skb->head 1120 0 dataref at line offset >60 80 0 The last row counts the accesses that actually fault: skb_shinfo()->dataref sits at head+end+0x20 and is a 4-byte atomic, so `lock incl` splits a 64-byte cache line only when that address lands at offset 61..63. All 80 occurrences were at offset 61; the panic reported above was at offset 62. Eliminating the misalignment removes every one of them. Same class of bug as commit 3bed3cc4156e ("net: Do not allocate page fragments t ---truncated--- | Fri 30 Oct |
| CVE-2026-99126 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. | Fri 30 Oct |
| CVE-2026-99124 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix leak of uninitialized kernel data in SCLP report While report_error_write() checks that the provided buffer is at least as large as the header struct, but not that it is large enough to contain the report with the length claimed by report->length. If user-space provides a short buffer, meaning a larger report->length than the actually written payload, up to around 4K of kernel data from past the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter() will leak into the SCLP report. However, as the entity processing the SCLP is privileged and able to access at least the page including the report, this does not leak data that entity could not access but it is still an out of bounds read and a malformed error report that should be rejected. | Fri 30 Oct |
| CVE-2026-99121 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: avoid divide by zero in fib_rebalance fib_rebalance() computes the total eligible nexthop weight in one pass and programs upper bounds in a second pass. A concurrent change to ignore_routes_with_linkdown can make the first pass return zero while the second pass sees an eligible nexthop, resulting in division by zero. If the first pass reports a zero total, set each nexthop upper bound to -1 and skip the division. This matches the IPv6 fix in commit d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance") and preserves the lock-free rebalance path. | Fri 30 Oct |
| CVE-2026-99118 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) | Fri 30 Oct |
| CVE-2026-99115 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION, that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns FileSysIdentifier. Those eight bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. Report the file system id statfs() returned, which is what the field is for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so assemble the value first, val[0] as the low half, and convert it on the way out. | Fri 30 Oct |
| CVE-2026-99114 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION, that is the whole of struct smb2_fs_control_info, but never assigns FileSystemControlFlags. Those four bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. ksmbd does not implement quota tracking, so report no control flags. | Fri 30 Oct |
| CVE-2026-99113 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION, that is the whole of struct object_id_info, but writes only 46 of them: - objid[] is 16 bytes, and when the volume UUID is not available only sizeof(stfs.f_fsid) (8) bytes are copied into it; - extended_info.version_string[] is STRING_LENGTH (28) bytes, and only strlen("1.1.0") (5) bytes are copied into it. The response buffer is zeroed on allocation (kvzalloc() in smb2_allocate_rsp_buf()), so for a standalone request the remaining 31 bytes are zero. In a compound request they need not be. The offset of the next response is advanced by the length pinned for the previous one, so if a preceding command wrote its reply into the buffer and then failed, smb2_set_err_rsp() pins only the short error response and the next reply lands inside the area that has already been written. Only the header is cleared there: memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2); The client then receives up to 31 bytes of a response it was not meant to see, including one that failed with an access denied error. Clear the structure before filling it in. As a side effect version_string is now NUL terminated. | Fri 30 Oct |
| CVE-2026-99106 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: free the userptr ranges when a CS fails after parser_bos amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of the BO list and looks up the user pages. Those ranges are only freed when amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks them under the notifier lock. If amdgpu_cs_patch_jobs(), amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of amdgpu_cs_submit() fails, nothing frees them: neither amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range. Each such CS then leaks the range, its hmm_pfns array (8 bytes per page of the userptr BO) and the BO reference the range holds. An IB on a ring that patches the CS in place (e.g. VCN) with an unmapped va_start fails in amdgpu_cs_patch_ibs() and takes this path. Free the ranges on those error paths. Ranges amdgpu_cs_submit() already dropped are NULL, so freeing them again is a no-op. (cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267) | Fri 30 Oct |
| CVE-2026-99105 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick. | Fri 30 Oct |
| CVE-2026-99103 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix unbound pool lifetime for pending pwqs KASAN reports a use-after-free of an unbound worker_pool in node_activate_pending_pwq(): BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120 Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318 CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: 0x0 (flush-8:0) Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x610 kasan_report+0xce/0x100 _raw_spin_trylock+0x6d/0x120 pwq_dec_nr_in_flight+0x4b4/0xcb0 process_one_work+0x921/0x11a0 worker_thread+0x4d0/0xd20 kthread+0x2de/0x3c0 ret_from_fork+0x3aa/0x620 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 311: alloc_pwq+0x439/0xca0 apply_wqattrs_prepare+0x75e/0xd10 apply_workqueue_attrs_locked+0x44/0xa0 wq_nice_store+0x350/0x450 Freed by task 0: kfree+0x127/0x3b0 rcu_core+0x523/0x1780 handle_softirqs+0x1b3/0x610 Last potentially related work creation: put_unbound_pool+0x3f3/0x7d0 pwq_release_workfn+0x494/0x8e0 kthread_worker_fn+0x1ff/0x790 Canceling the last inactive work skips pwq_dec_nr_active(), so an empty pwq can remain on pending_pwqs when its refcnt reaches zero. pwq_release_workfn() currently puts the pool before removing that pwq. If this drops the last pool reference, the pool can be RCU-freed while the pwq remains reachable, and node_activate_pending_pwq() may trylock the freed pool->lock. Remove the pwq from pending_pwqs before putting the pool. | Fri 30 Oct |
| CVE-2026-99095 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: drain the hangcheck timer and works on V3D unbind Nothing stops the hangcheck timer that submitted jobs arm, or the job_done_work that the render-done interrupt queues, at teardown: vc4_irq_disable() cancels only overflow_mem_work, and vc4_gem_destroy() runs from the drm-managed release, after vc4_v3d_unbind() has already uninstalled the V3D interrupt and cleared vc4->v3d. A timer still armed by then reads V3D registers through the NULL vc4->v3d pointer, and the late callbacks run on the vc4_dev embedding them after it has been freed. Drain them in vc4_v3d_unbind(): shut the timer down and cancel reset_work before the interrupt is taken down, because its vc4_irq_reset() re-enables it, then flush job_done_work so that completions queued at teardown still release their jobs. This issue was found by an in-house static analysis tool. | Fri 30 Oct |
| CVE-2026-99091 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after. | Fri 30 Oct |
| CVE-2026-99089 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove. | Fri 30 Oct |
| CVE-2026-99088 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800 | Fri 30 Oct |
| CVE-2026-99080 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fs: Free any excess xarray nodes in clear_inode() For many years we've had a hard to hit leak of xarray nodes. Hugh documented it well in commit 786b31121a2c. Recently people and syzbot have found ways to force it to happen with madvise. Rather than fix the leaks where they happen, just call xa_destroy() which has the side-effect of cycling the i_pages lock. | Fri 30 Oct |
| CVE-2026-99074 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: stop PMTU walk when nexthop group shrinks Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if multipath enabled") made __ip_rt_update_pmtu() update every path. For nexthop objects, fib_info_num_path() and fib_info_nhc() independently load nh->nh_grp. RCU protects each group's lifetime but does not make the loads observe the same group. If replacement shrinks the group after the loop accepts an index, fib_info_nhc() returns NULL and update_or_create_fnhe() dereferences it. A deterministic probe only widened the existing window between the real operations. On v7.2, an RTM_NEWNEXTHOP replacement published a one-member group after the PMTU reader accepted index 1 from a two-member group, producing: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: update_or_create_fnhe+0x45/0x15b0 Stop when the indexed path is absent. Groups are dense, so no later index exists in that snapshot. The same real-writer window completed 114,423 PMTU iterations without an oops with this check. A reproducer is available on request. Replacement requires CAP_NET_ADMIN in the network namespace. Where unprivileged user namespaces are permitted, a local user can obtain it in a new user and network namespace. | Fri 30 Oct |
| CVE-2026-99072 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: stop route notification sizing when nexthop group shrinks Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added an RCU-only fib_nlmsg_size() call for asynchronous hardware flag notifications. fib_nlmsg_size() checks fib_info_num_path() before each iteration, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences it. Stop sizing when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path. | Fri 30 Oct |
| CVE-2026-99071 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv4: do not warn on route notification size race Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added asynchronous route notifications for hardware flag changes. fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later fills it with fib_dump_info() while holding only RCU. With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. fib_dump_info() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners. | Fri 30 Oct |
| CVE-2026-99070 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later fills it with rt6_fill_node(). With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners. | Fri 30 Oct |
| CVE-2026-99067 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too. | Fri 30 Oct |
| CVE-2026-99063 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root. | Fri 30 Oct |
| CVE-2026-99061 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface. | Fri 30 Oct |
| CVE-2026-99058 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire. | Fri 30 Oct |
| CVE-2026-99057 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xen/netfront: don't leak the skb when xennet_fill_frags() fails When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does. | Fri 30 Oct |
| CVE-2026-99052 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE. | Fri 30 Oct |
| CVE-2026-99049 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success. | Fri 30 Oct |
| CVE-2026-99045 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped. | Fri 30 Oct |
| CVE-2026-99043 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ice: fix metadata_dst refcount handling on representor teardown ice_eswitch_release_repr() uses metadata_dst_free() to release the representor's metadata_dst. metadata_dst_free() directly frees the underlying memory without checking the dst_entry refcount. When ice_eswitch_port_start_xmit() processes a packet, it takes a reference via dst_hold() and attaches the metadata_dst to the skb. If the representor is torn down while packets are still queued on the lower device (e.g. in a qdisc), the metadata_dst is freed while references are still held. Use dst_release() instead, which correctly decrements the refcount and only frees the object when all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Other drivers sharing this pattern (nfp, airoha, bnxt) already use dst_release() for their metadata_dst lifecycle. | Fri 30 Oct |
450 of 11125 · Next · Previous
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.