Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2025-39698 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this. | 19 Oct |
| CVE-2025-39722 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Prevent crash on suspend with iMX8QM / iMX8ULP Since the CAAM on these SoCs is managed by another ARM core, called the SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which also reserves access to register page 0 suspend operations cannot touch this page. This is similar to when running OPTEE, where OPTEE will reserve page 0. Track this situation using a new state variable no_page0, reflecting if page 0 is reserved elsewhere, either by other management cores in SoC or by OPTEE. Replace the optee_en check in suspend/resume with the new check. optee_en cannot go away as it's needed elsewhere to gate OPTEE specific situations. Fixes the following splat at suspend: Internal error: synchronous external abort: 0000000096000010 [#1] SMP Hardware name: Freescale i.MX8QXP ACU6C (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : readl+0x0/0x18 lr : rd_reg32+0x18/0x3c sp : ffffffc08192ba20 x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000 x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090 x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010 x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5 x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001 x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002 x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000 x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004 Call trace: readl+0x0/0x18 caam_ctrl_suspend+0x30/0xdc dpm_run_callback.constprop.0+0x24/0x5c device_suspend+0x170/0x2e8 dpm_suspend+0xa0/0x104 dpm_suspend_start+0x48/0x50 suspend_devices_and_enter+0x7c/0x45c pm_suspend+0x148/0x160 state_store+0xb4/0xf8 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x38/0x48 kernfs_fop_write_iter+0xb4/0x178 vfs_write+0x118/0x178 ksys_write+0x6c/0xd0 __arm64_sys_write+0x14/0x1c invoke_syscall.constprop.0+0x64/0xb0 do_el0_svc+0x90/0xb0 el0_svc+0x18/0x44 el0t_64_sync_handler+0x88/0x124 el0t_64_sync+0x150/0x154 Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000) | 19 Oct |
| CVE-2025-71269 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0). | 19 Oct |
| CVE-2025-71130 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd) | 19 Oct |
| CVE-2026-98132 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO states.c:__clean_func_state() can downgrade scalar zero spill to STACK_ZERO in the following case: *(u64 *)(r10 - 8) = 0; ... checkpoint ... r1 = *(u32 *)(r10 - 4); ... no reads from r10-8 ... Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a combination: 0000pppp (p stands for poison). Such a change breaks precision propagation chains. All places that produce STACK_ZERO should call bpf_mark_chain_precision() for the zero source. This patch fixes the bug in a simplest way possible: avoids converting stack spills of zero to STACK_ZERO. Two smarter approaches are possible: - do bpf_mark_chain_precision() from __clean_func_state() - check slot liveness information in check_stack_write_fixed_off() I investigated both and the changes required are a bit tricky, hence go with a simple fix for the time being. | 19 Oct |
| CVE-2025-66453 | 5.5 medium | 0.00% | mozilla, rhino | Rhino is an open-source implementation of JavaScript written entirely in Java. Prior to 1.8.1, 1.7.15.1, and 1.7.14.1, when an application passed an attacker controlled float poing number into the toFixed() function, it might lead to high CPU consumption and a potential Denial of Service. Small numbers go through this call stack: NativeNumber.numTo > DToA.JS_dtostr > DToA.JS_dtoa > DToA.pow5mult where pow5mult attempts to raise 5 to a ridiculous power. This vulnerability is fixed in 1.8.1, 1.7.15.1, and 1.7.14.1. | 18 Oct |
| CVE-2025-38455 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing P ---truncated--- | 15 Oct |
| CVE-2025-38166 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: bpf: fix ktls panic with sockmap [ 2172.936997] ------------[ cut here ]------------ [ 2172.936999] kernel BUG at lib/iov_iter.c:629! ...... [ 2172.944996] PKRU: 55555554 [ 2172.945155] Call Trace: [ 2172.945299] <TASK> [ 2172.945428] ? die+0x36/0x90 [ 2172.945601] ? do_trap+0xdd/0x100 [ 2172.945795] ? iov_iter_revert+0x178/0x180 [ 2172.946031] ? iov_iter_revert+0x178/0x180 [ 2172.946267] ? do_error_trap+0x7d/0x110 [ 2172.946499] ? iov_iter_revert+0x178/0x180 [ 2172.946736] ? exc_invalid_op+0x50/0x70 [ 2172.946961] ? iov_iter_revert+0x178/0x180 [ 2172.947197] ? asm_exc_invalid_op+0x1a/0x20 [ 2172.947446] ? iov_iter_revert+0x178/0x180 [ 2172.947683] ? iov_iter_revert+0x5c/0x180 [ 2172.947913] tls_sw_sendmsg_locked.isra.0+0x794/0x840 [ 2172.948206] tls_sw_sendmsg+0x52/0x80 [ 2172.948420] ? inet_sendmsg+0x1f/0x70 [ 2172.948634] __sys_sendto+0x1cd/0x200 [ 2172.948848] ? find_held_lock+0x2b/0x80 [ 2172.949072] ? syscall_trace_enter+0x140/0x270 [ 2172.949330] ? __lock_release.isra.0+0x5e/0x170 [ 2172.949595] ? find_held_lock+0x2b/0x80 [ 2172.949817] ? syscall_trace_enter+0x140/0x270 [ 2172.950211] ? lockdep_hardirqs_on_prepare+0xda/0x190 [ 2172.950632] ? ktime_get_coarse_real_ts64+0xc2/0xd0 [ 2172.951036] __x64_sys_sendto+0x24/0x30 [ 2172.951382] do_syscall_64+0x90/0x170 ...... After calling bpf_exec_tx_verdict(), the size of msg_pl->sg may increase, e.g., when the BPF program executes bpf_msg_push_data(). If the BPF program sets cork_bytes and sg.size is smaller than cork_bytes, it will return -ENOSPC and attempt to roll back to the non-zero copy logic. However, during rollback, msg->msg_iter is reset, but since msg_pl->sg.size has been increased, subsequent executions will exceed the actual size of msg_iter. ''' iov_iter_revert(&msg->msg_iter, msg_pl->sg.size - orig_size); ''' The changes in this commit are based on the following considerations: 1. When cork_bytes is set, rolling back to non-zero copy logic is pointless and can directly go to zero-copy logic. 2. We can not calculate the correct number of bytes to revert msg_iter. Assume the original data is "abcdefgh" (8 bytes), and after 3 pushes by the BPF program, it becomes 11-byte data: "abc?de?fgh?". Then, we set cork_bytes to 6, which means the first 6 bytes have been processed, and the remaining 5 bytes "?fgh?" will be cached until the length meets the cork_bytes requirement. However, some data in "?fgh?" is not within 'sg->msg_iter' (but in msg_pl instead), especially the data "?" we pushed. So it doesn't seem as simple as just reverting through an offset of msg_iter. 3. For non-TLS sockets in tcp_bpf_sendmsg, when a "cork" situation occurs, the user-space send() doesn't return an error, and the returned length is the same as the input length parameter, even if some data is cached. Additionally, I saw that the current non-zero-copy logic for handling corking is written as: ''' line 1177 else if (ret != -EAGAIN) { if (ret == -ENOSPC) ret = 0; goto send_end; ''' So it's ok to just return 'copied' without error when a "cork" situation occurs. | 15 Oct |
| CVE-2025-38084 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: unshare page tables during VMA split, not before Currently, __split_vma() triggers hugetlb page table unsharing through vm_ops->may_split(). This happens before the VMA lock and rmap locks are taken - which is too early, it allows racing VMA-locked page faults in our process and racing rmap walks from other processes to cause page tables to be shared again before we actually perform the split. Fix it by explicitly calling into the hugetlb unshare logic from __split_vma() in the same place where THP splitting also happens. At that point, both the VMA and the rmap(s) are write-locked. An annoying detail is that we can now call into the helper hugetlb_unshare_pmds() from two different locking contexts: 1. from hugetlb_split(), holding: - mmap lock (exclusively) - VMA lock - file rmap lock (exclusively) 2. hugetlb_unshare_all_pmds(), which I think is designed to be able to call us with only the mmap lock held (in shared mode), but currently only runs while holding mmap lock (exclusively) and VMA lock Backporting note: This commit fixes a racy protection that was introduced in commit b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that commit claimed to fix an issue introduced in 5.13, but it should actually also go all the way back. [[email protected]: v2] | 15 Oct |
| CVE-2025-22013 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state There are several problems with the way hyp code lazily saves the host's FPSIMD/SVE state, including: * Host SVE being discarded unexpectedly due to inconsistent configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to result in QEMU crashes where SVE is used by memmove(), as reported by Eric Auger: https://issues.redhat.com/browse/RHEL-68997 * Host SVE state is discarded *after* modification by ptrace, which was an unintentional ptrace ABI change introduced with lazy discarding of SVE state. * The host FPMR value can be discarded when running a non-protected VM, where FPMR support is not exposed to a VM, and that VM uses FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR before unbinding the host's FPSIMD/SVE/SME state, leaving a stale value in memory. Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME state when loading a vCPU such that KVM does not need to save any of the host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is removed and the necessary call to fpsimd_save_and_flush_cpu_state() is placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr' should not be used, they are set to NULL; all uses of these will be removed in subsequent patches. Historical problems go back at least as far as v5.17, e.g. erroneous assumptions about TIF_SVE being clear in commit: 8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving") ... and so this eager save+flush probably needs to be backported to ALL stable trees. | 15 Oct |
| CVE-2024-58053 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix handling of received connection abort Fix the handling of a connection abort that we've received. Though the abort is at the connection level, it needs propagating to the calls on that connection. Whilst the propagation bit is performed, the calls aren't then woken up to go and process their termination, and as no further input is forthcoming, they just hang. Also add some tracing for the logging of connection aborts. | 15 Oct |
| CVE-2023-53087 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/i915/active: Fix misuse of non-idle barriers as fence trackers Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) | 15 Oct |
| CVE-2026-46051 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | 15 Oct |
| CVE-2026-46038 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Free the node during ctrl_cmd_bye() A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye(). | 15 Oct |
| CVE-2025-68725 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf: Do not let BPF test infra emit invalid GSO types to stack Yinhao et al. reported that their fuzzer tool was able to trigger a skb_warn_bad_offload() from netif_skb_features() -> gso_features_check(). When a BPF program - triggered via BPF test infra - pushes the packet to the loopback device via bpf_clone_redirect() then mentioned offload warning can be seen. GSO-related features are then rightfully disabled. We get into this situation due to convert___skb_to_skb() setting gso_segs and gso_size but not gso_type. Technically, it makes sense that this warning triggers since the GSO properties are malformed due to the gso_type. Potentially, the gso_type could be marked non-trustworthy through setting it at least to SKB_GSO_DODGY without any other specific assumptions, but that also feels wrong given we should not go further into the GSO engine in the first place. The checks were added in 121d57af308d ("gso: validate gso_type in GSO handlers") because there were malicious (syzbot) senders that combine a protocol with a non-matching gso_type. If we would want to drop such packets, gso_features_check() currently only returns feature flags via netif_skb_features(), so one location for potentially dropping such skbs could be validate_xmit_unreadable_skb(), but then otoh it would be an additional check in the fast-path for a very corner case. Given bpf_clone_redirect() is the only place where BPF test infra could emit such packets, lets reject them right there. | 15 Oct |
| CVE-2024-42079 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix NULL pointer dereference in gfs2_log_flush In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush lock to provide exclusion against gfs2_log_flush(). In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before dereferencing it. Otherwise, we could run into a NULL pointer dereference when outstanding glock work races with an unmount (glock_work_func -> run_queue -> do_xmote -> inode_go_sync -> gfs2_log_flush). | 15 Oct |
| CVE-2024-27074 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked. | 15 Oct |
| CVE-2023-42755 | 5.5 medium | 0.00% | linux, redhat, linux_kernel, enterprise_linux, debian_linux | A flaw was found in the IPv4 Resource Reservation Protocol (RSVP) classifier in the Linux kernel. The xprt pointer may go beyond the linear part of the skb, leading to an out-of-bounds read in the `rsvp_classify` function. This issue may allow a local user to crash the system and cause a denial of service. | 15 Oct |
| CVE-2026-108836 | 5.5 medium | 0.00% | no CPE yet | A vulnerability has been found in Ollama up to 0.34.1. The affected element is the function IsValid of the file types/model/name.go of the component Pull API. The manipulation leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.34.2 is sufficient to fix this issue. The identifier of the patch is dfabde4539e42ba1e1eab50a3a50b88aea7958a0. It is suggested to upgrade the affected component. | 13 Oct |
| CVE-2026-108899 | 5.5 medium | 0.00% | no CPE yet | A flaw has been found in tobychui zoraxy up to 3.3.4. This impacts the function handleBasicAuth of the file mod/dynamicproxy/authProviders.go of the component Path Exception Matcher. This manipulation of the argument PathPrefix causes improper authorization. It is possible to initiate the attack remotely. The exploit has been published and may be used. Upgrading to version 3.3.5-rc1 will fix this issue. Patch name: 37cd0f27b17cd15cfa4af409bfec943146f5fdfe. Upgrading the affected component is advised. | 13 Oct |
| CVE-2023-35946 | 5.5 medium | 0.00% | gradle | Gradle is a build tool with a focus on build automation and support for multi-language development. When Gradle writes a dependency into its dependency cache, it uses the dependency's coordinates to compute a file location. With specially crafted dependency coordinates, Gradle can be made to write files into an unintended location. The file may be written outside the dependency cache or over another file in the dependency cache. This vulnerability could be used to poison the dependency cache or overwrite important files elsewhere on the filesystem where the Gradle process has write permissions. Exploiting this vulnerability requires an attacker to have control over a dependency repository used by the Gradle build or have the ability to modify the build's configuration. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Gradle will refuse to cache dependencies that have path traversal elements in their dependency coordinates. It is recommended that users upgrade to a patched version. If you are unable to upgrade to Gradle 7.6.2 or 8.2, `dependency verification` will make this vulnerability more difficult to exploit. | 8 Oct |
| CVE-2026-61801 | 5.5 medium | 0.00% | no CPE yet | The `github.com/moby/sys/user` package provides Go utilities for parsing and looking up entries in Unix-style user and group database files. Versions before 0.4.1 do not sufficiently limit entries when parsing `/etc/passwd`- or `/etc/group`-style files, allowing an attacker who can supply a specially crafted file to cause excessive memory consumption and potentially terminate the affected process due to an out-of-memory condition. This issue is patched in version 0.4.1. As a workaround, avoid parsing attacker-controlled user or group database files, or validate and limit untrusted input before parsing it. | 8 Oct |
| CVE-2026-44310 | 5.4 medium | 0.00% | no CPE yet | Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. | Mon 26 Oct |
| CVE-2026-13426 | 5.4 medium | 0.00% | no CPE yet | The Mattermost Go module github.com/mattermost/mattermost/server/public versions < v0.1.22 fail to validate path parameters when constructing API route paths which allows an attacker to redirect API calls to unintended endpoints via crafted IDs containing path traversal components. Mattermost Advisory ID: MMSA-2025-00532 | 25 Oct |
| CVE-2025-68120 | 5.4 medium | 0.00% | go | To prevent unexpected untrusted code execution, the Visual Studio Code Go extension is now disabled in Restricted Mode. | 13 Oct |
| CVE-2025-11166 | 5.4 medium | 0.00% | no CPE yet | The WP Go Maps (formerly WP Google Maps) plugin for WordPress is vulnerable to Cross-Site Request Forgery (CSRF) in all versions up to, and including, 9.0.46. This is due to the plugin exposing state-changing REST actions through an AJAX bridge without proper CSRF token validation, and having destructive logic reachable via GET requests with no permission_callback. This makes it possible for unauthenticated attackers to force logged-in administrators to create, update, or delete markers and geometry features via CSRF attacks, and allows anonymous users to trigger mass deletion of markers via unsafe GET requests. | 8 Oct |
| CVE-2026-63308 | 5.3 medium | 0.00% | helm | Helm through 4.2.3, fixed in commit ba6c9a2, contains a denial of service vulnerability in the Files.Lines template helper in pkg/engine/files.go that allows attackers to trigger an index out of range panic by including zero-length byte slices in chart files. Attackers can include empty files in Helm charts to cause deterministic render failures across template, install, upgrade, lint, and SDK Engine.Render operations. | Thu 29 Oct |
| CVE-2026-118653 | 5.3 medium | 0.00% | no CPE yet | Echo is a Go web framework. From 4.0.0 until 5.1.0, Context.RealIP falls back to client-supplied X-Forwarded-For or X-Real-IP values when Echo.IPExtractor is unset, and the default RateLimiter uses that result as its client identifier. A remote attacker can rotate arbitrary forwarded-address values to obtain new rate-limit buckets and bypass IP-based throttling used for controls such as brute-force or request-volume protection. This issue is fixed in Echo v5.1.0. | Wed 28 Oct |
| CVE-2026-118651 | 5.3 medium | 0.00% | no CPE yet | Echo is a Go web framework. From 4.0.0 until 5.4.0, the Proxy middleware can preserve an attacker-supplied X-Real-IP header and forward it to an upstream service when Echo.IPExtractor is not configured. A remote client can therefore make upstream services receive a spoofed client address, undermining IP-based access controls, rate limiting, audit logging, or geographic restrictions that trust Echo's forwarded identity. This issue is fixed in Echo 5.4.0. | Wed 28 Oct |
| CVE-2026-118266 | 5.3 medium | 0.00% | no CPE yet | Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Echo's MethodOverride middleware accepts a safe HTTP method as the override target for a POST request. When MethodOverride is registered before CSRF in the post-routing middleware chain, route selection retains the original state-changing POST handler but the override changes the method before CSRF evaluates it, causing both token validation and Sec-Fetch-Site checks to be skipped. A cross-site exploit requires an authenticated victim and an override value that a browser-submitted request can control, such as the form getter used by the advisory reproducer; the default X-HTTP-Method-Override header getter is not settable by a cross-site form. This issue is fixed in 4.16.0 and 5.4.0. | Wed 28 Oct |
| CVE-2026-118265 | 5.3 medium | 0.00% | no CPE yet | Echo is a Go web framework. From 5.0.0 until 5.4.1, Echo v5's ExtractIPFromRealIPHeader validates whether the client-supplied X-Real-IP value belongs to a trusted range instead of validating the direct network peer. A client reaching Echo directly, or through a proxy that preserves the header, can supply a loopback or private address and have Context.RealIP return that spoofed identity. Applications using the extractor for IP allowlists, rate limiting, audit logs, or forwarding headers can consequently trust an attacker-controlled address; the default direct extractor and Echo v4 are unaffected. This issue is fixed in 5.4.1. | Wed 28 Oct |
| CVE-2026-40304 | 5.3 medium | 0.00% | netfoundry, zrok | zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, the unaccess handler (controller/unaccess.go) contains a logical error in its ownership guard: when a frontend record has environment_id = NULL (the marker for admin-created global frontends), the condition short-circuits to false and allows the deletion to proceed without any ownership verification. A non-admin user who knows a global frontend token can call DELETE /api/v2/unaccess with any of their own environment IDs and permanently delete the global frontend, taking down all public shares routed through it. Version 2.0.1 patches the issue. | Mon 26 Oct |
| CVE-2026-39825 | 5.3 medium | 0.00% | golang, go | ReverseProxy can forward queries containing parameters not visible to Rewrite functions. When used with a Rewrite function, or a Director function which parses query parameters, ReverseProxy sanitizes the forwarded request to remove query parameters which are not parsed by url.ParseQuery. ReverseProxy does not take ParseQuery's limit on the total number of query parameters (controlled by GODEBUG=urlmaxqueryparams=N) into account. This can permit ReverseProxy to forward a request containing a query parameter that is not visible to the Rewrite function. For example, the query "a1=x&a2=x&...&a10000=x&hidden=y" can forward the parameter "hidden=y" while hiding it from the proxy's Rewrite function. | Mon 26 Oct |
| CVE-2026-42554 | 5.3 medium | 0.00% | gofiber, fiber | Fiber is a web framework for Go. Prior to 2.52.12 and 3.1.0, Cross-Site Scripting vulnerability in Go Fiber allows a remote attacker to inject arbitrary HTML/JavaScript by supplying Accept: text/html on any request whose handler passes attacker-influenced data to the AutoFormat() feature. The developer opts into content negotiation by calling AutoFormat(), but does not opt into raw HTML emission for a particular request; Fiber chooses that branch from attacker-controlled Accept. The html branch is the sole outlier in a method whose name (AutoFormat) and symmetrical structure actively telegraph "safe, format-agnostic reply." This vulnerability is fixed in 2.52.12 and 3.1.0. | Mon 26 Oct |
| CVE-2026-44309 | 5.3 medium | 0.00% | no CPE yet | Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. Prior to 0.16.0, gitsign verify and gitsign verify-tag re-encode commit/tag objects through go-git's EncodeWithoutSignature before checking the signature, instead of verifying against the raw git object bytes. For malformed objects with duplicate tree headers, git-core and go-git parse different trees: git-core uses the first, go-git uses the second. A signature crafted over the go-git-normalized form (second tree) passes gitsign verify while git-core resolves the commit to a completely different tree. This breaks the invariant that a verified signature, the commit semantics git-core presents to users, and the object hash logged in Rekor all refer to the same content. This vulnerability is fixed in 0.16.0. | Mon 26 Oct |
| CVE-2026-65959 | 5.3 medium | 0.00% | no CPE yet | Vitess is a database clustering system for horizontal scaling of MySQL. In 24.0.2 and earlier, the /debug/vrlog endpoint registered by addHttpEndpoint() in go/vt/vttablet/tabletmanager/vreplication/vrlog.go invokes vrlogStatsHandler() without acl.CheckAccessHTTP(r, acl.DEBUGGING), unlike comparable debug endpoints. A remote caller who can reach the vttablet debug HTTP port can bypass the configured security policy and stream VrLogStats data produced from NewVrLogStats().Send(), including literal SQL statements and bound application values from MoveTables, Reshard, Materialize, and vitess-strategy Online DDL workflows | Mon 26 Oct |
| CVE-2026-56307 | 5.3 medium | 0.00% | no CPE yet | Cap-go before 12.128.12 contains a broken cursor pagination vulnerability in the /private/devices endpoint on the Cloudflare/workerd path that allows authenticated attackers to cause duplicate-page loops and make later rows unreachable. Attackers with app.read_devices access can exploit non-advancing cursor filters to trigger infinite pagination loops, prevent dataset traversal, and cause repeated processing in device-management workflows. | 25 Oct |
| CVE-2026-56310 | 5.3 medium | 0.00% | no CPE yet | Cap-go before 12.128.2 contains an authorization bypass vulnerability in the GET /organization/members endpoint that allows org-limited API keys to bypass limited_to_orgs restrictions. Attackers with org-limited API keys can read membership data including uid, email, image_url, role, and is_tmp from organizations outside their assigned scope. | 25 Oct |
| CVE-2026-42505 | 5.3 medium | 0.00% | golang, go | Handshakes which used Encrypted Client Hello could be de-anonymized by a passive network observer due to a disclosure of pre-shared key identities in the unencrypted client hello. | 25 Oct |
| CVE-2026-45045 | 5.3 medium | 0.00% | gofiber, fiber | Fiber is an Express inspired web framework written in Go. Prior to 3.3.0 and 2.52.14, the BalancerForward proxy helper in middleware/proxy/proxy.go uses Header.Add() instead of Header.Set() when injecting X-Real-IP, allowing an attacker-supplied first X-Real-IP value to be forwarded to upstream servers for logging, rate limiting, and access control. This issue is fixed in version 3.3.0 and 2.52.14. | 25 Oct |
| CVE-2026-14784 | 5.3 medium | 0.00% | no CPE yet | A vulnerability was identified in vxcontrol PentAGI up to 2.1.0. This affects an unknown function of the file backend/pkg/docker/client.go of the component Docker API. The manipulation leads to sandbox issue. The attack may be initiated remotely. The pull request to fix this issue awaits acceptance. | 25 Oct |
| CVE-2026-63097 | 5.3 medium | 0.00% | no CPE yet | Dendrite through 0.13.8 contains an improper access control vulnerability in the syncapi /context endpoint (syncapi/routing/context.go) that allows authenticated local users to access post-leave room state events by exploiting a flawed membership check that evaluates only the RoomExists field while ignoring IsInRoom, HasBeenInRoom, and Membership fields. Attackers who have left a room can call the rooms context API endpoint for a previously permitted event and receive unfiltered current room state that the /messages and /sync endpoints correctly withhold. | 24 Oct |
| CVE-2026-55998 | 5.3 medium | 0.00% | no CPE yet | The endpoint /v3/import/{token}_{clusterId}.yaml retrieves the cluster object before validating the token. When a valid cluster ID references a cluster that has private registry secrets configured, a nil pointer dereference in pkg/systemtemplate/private_registry.go causes the request to return HTTP 502 Bad Gateway. For cluster IDs that do not exist, the endpoint returns HTTP 200. This observable difference in response codes constitutes a reliable enumeration oracle. | 24 Oct |
| CVE-2026-25466 | 5.3 medium | 0.00% | no CPE yet | Unauthenticated Broken Access Control in WP Go Maps <= 10.1.04 versions. | 24 Oct |
| CVE-2026-66064 | 5.3 medium | 0.00% | no CPE yet | goshs is a feature-rich single-binary file server for red teamers and developers. Prior to 2.1.5, the httpserver/handler.go sendFile handler opened files using a cleaned path but derived the authorization filename from raw req.URL.Path, so a trailing slash could bypass .goshs ACL-file protection and block-list checks. This issue is fixed in version 2.1.5. | 23 Oct |
| CVE-2026-19354 | 5.3 medium | 0.00% | no CPE yet | A vulnerability was found in lock-upme OPMS up to 831440f37a92c1568f2e071d5233bc873a9d8b09. The impacted element is an unknown function of the file controllers/messages/message.go of the component IN Clause Handler. Performing a manipulation of the argument ids results in sql injection. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. | 23 Oct |
| CVE-2026-76032 | 5.3 medium | 0.00% | no CPE yet | Pydio Cells 5.0.0 through 5.0.2 returns share-link details to any authenticated user. The REST handler for GET /a/share/link/{Uuid} in idm/share/rest/handler.go reads the workspace UUID from the path, calls LinkById, and writes the result with no authorization step, whereas the sibling handler for GET /a/share/cell/{Uuid} loads the workspace and requires MatchPolicies with ResourcePolicyAction_READ, returning a not-found error so that existence is not disclosed. Nothing compensates further down: GetLinkWorkspace reaches GetOrCreateWorkspace, which issues SearchWorkspace with a query carrying no ResourcePolicyQuery, and PrepareResourcePolicyQuery returns the query unmodified when that field is nil, so the workspace service applies no policy filter. The workspace UUID is not secret, because the unauthenticated public page served for a share link embeds it as START_REPOSITORY. Any account holding a standard user role can therefore submit the UUID and receive the link hash and URL, the owner's user identifier, the hidden share user login, the permission set, the download limit and count, the target users, the expiry, and the password-required flag, while a direct read of the shared node from the same account is refused. | 22 Oct |
| CVE-2026-82402 | 5.3 medium | 0.00% | no CPE yet | Gogs is an open source self-hosted Git service. Prior to 0.15.0+dev, an unauthenticated attacker can provide a backslash-containing target to the /redirect endpoint, and similar post-action redirect flows are also affected. internal/urlx/urlx.go IsSameSite validates a normalized form of the target while cmd/gogs/internal/web/web.go getRedirect and other callers use the original value in the Location response. This backslash normalization mismatch lets browsers interpret the Location value as a scheme-relative external URL, allowing links on a trusted Gogs domain to redirect victims to attacker-controlled content for phishing. This vulnerability is fixed in 0.15.0+dev. | 20 Oct |
| CVE-2026-111920 | 5.3 medium | 0.00% | no CPE yet | Vikunja 2.6.0 contains a broken access control flaw in getProjectAccessForUser (pkg/models/project_access.go), which resolves a user's effective project permission as the maximum over the project tree, silently overriding explicit lower-permission shares on sub-projects. A collaborator with write access on a parent project but read-only access to a child project can modify the child project's tasks and content. | 19 Oct |
| CVE-2026-107834 | 5.3 medium | 0.00% | no CPE yet | OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.0, the multipart loop in internal/bodyprocessors/multipart.go executes defer temp.Close() for every uploaded file part, so each temporary-file descriptor remains open until the complete request returns. An unauthenticated attacker can submit a multipart body containing many minimal file parts and exhaust the process file-descriptor table within the request-body size limit, causing os.CreateTemp failures, MULTIPART_STRICT_ERROR responses, blocked legitimate uploads, and process-wide inability to open files or sockets. This issue is fixed in version 3.8.0. | 16 Oct |
Download these 645 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.