Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2023-27371 | 5.9 medium | 1.0% | gnu, libmicrohttpd | GNU libmicrohttpd before 0.9.76 allows remote DoS (Denial of Service) due to improper parsing of a multipart/form-data boundary in the postprocessor.c MHD_create_post_processor() method. This allows an attacker to remotely send a malicious HTTP POST packet that includes one or more '\0' bytes in a multipart/form-data boundary field, which - assuming a specific heap layout - will result in an out-of-bounds read and a crash in the find_boundary() function. | 14 Oct |
| CVE-2022-1434 | 5.9 medium | 1.0% | openssl, netapp, active_iq_unified_manager, clustered_data_ontap | The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). | 14 Oct |
| CVE-2026-47240 | 5.8 medium | 1.0% | no CPE yet | Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to 0.6.5 and 0.5.15, several Net::IMAP commands accept a "raw data" argument that is sent verbatim after validation to prevent command injection. However, if a server does not support non-synchronizing literals, it may still be possible to inject arbitrary IMAP commands inside non-synchronizing literals. A server without support for non-synchronizing literals may interpret the "+}\r\n" as the end of a malformed command line and respond with a tagged BAD. In that case, the contents of the literal will be interpreted as one or more new pipelined commands, allowing a CRLF command injection attack to succeed. This affects criteria for #search and #uid_search; search_keys for #sort, #thread, #uid_sort, and #uid_thread; and attr for #fetch and #uid_fetch. This vulnerability is fixed in 0.6.5 and 0.5.15. | Sun 25 Oct |
| CVE-2026-75628 | 5.7 medium | 1.0% | no CPE yet | Punk::OAuth2 versions before 0.03 for Perl allow an attacker-chosen off-site redirect after login because same_origin_path accepts a backslash or tab in the return parameter. oauth2_login reads the return parameter from the initiation request, runs same_origin_path over it, and stores the survivor in the session flow record as the post-login redirect target. That check rejects a value that does not begin with a slash, one with a slash as its second byte, and one containing CR or LF. A backslash and a tab pass. The URL Standard treats a backslash as equivalent to a slash for special schemes, so `/\evil.example` parses with the authority `evil.example`. It also strips ASCII tab before parsing, so a tab between two leading slashes leaves `//evil.example`. A crafted link to the application's own login route lands the victim on the attacker's site after a genuine authentication. The redirect carries no authorization code or access token. | Tue 27 Oct |
| CVE-2026-87910 | 5.7 medium | 1.0% | no CPE yet | When tarfile extracts a link on a system that doesn't support links, it falls back to extracting a member from the archive. In this case, the filter function is run twice: once for the extracted member, and once with name set to the location of the link. For one of the calls, the return value was ignored. Instead, the member should be skipped if either call returns None. | 22 Oct |
| CVE-2025-38181 | 5.5 medium | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated--- | 15 Oct |
| CVE-2024-56641 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/smc: initialize close_work early to avoid warning We encountered a warning that close_work was canceled before initialization. WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0 Workqueue: events smc_lgr_terminate_work [smc] RIP: 0010:__flush_work+0x19e/0x1b0 Call Trace: ? __wake_up_common+0x7a/0x190 ? work_busy+0x80/0x80 __cancel_work_timer+0xe3/0x160 smc_close_cancel_work+0x1a/0x70 [smc] smc_close_active_abort+0x207/0x360 [smc] __smc_lgr_terminate.part.38+0xc8/0x180 [smc] process_one_work+0x19e/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x117/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x22/0x30 This is because when smc_close_cancel_work is triggered, e.g. the RDMA driver is rmmod and the LGR is terminated, the conn->close_work is flushed before initialization, resulting in WARN_ON(!work->func). __smc_lgr_terminate | smc_connect_{rdma|ism} ------------------------------------------------------------- | smc_conn_create | \- smc_lgr_register_conn for conn in lgr->conns_all | \- smc_conn_kill | \- smc_close_active_abort | \- smc_close_cancel_work | \- cancel_work_sync | \- __flush_work | (close_work) | | smc_close_init | \- INIT_WORK(&close_work) So fix this by initializing close_work before establishing the connection. | 15 Oct |
| CVE-2022-49110 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: revisit gc autotuning as of commit 4608fdfc07e1 ("netfilter: conntrack: collect all entries in one cycle") conntrack gc was changed to run every 2 minutes. On systems where conntrack hash table is set to large value, most evictions happen from gc worker rather than the packet path due to hash table distribution. This causes netlink event overflows when events are collected. This change collects average expiry of scanned entries and reschedules to the average remaining value, within 1 to 60 second interval. To avoid event overflows, reschedule after each bucket and add a limit for both run time and number of evictions per run. If more entries have to be evicted, reschedule and restart 1 jiffy into the future. | 15 Oct |
| CVE-2021-4454 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80 | 15 Oct |
| CVE-2025-21707 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mptcp: consolidate suboption status MPTCP maintains the received sub-options status is the bitmask carrying the received suboptions and in several bitfields carrying per suboption additional info. Zeroing the bitmask before parsing is not enough to ensure a consistent status, and the MPTCP code has to additionally clear some bitfiled depending on the actually parsed suboption. The above schema is fragile, and syzbot managed to trigger a path where a relevant bitfield is not cleared/initialized: BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline] BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline] BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline] BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 __mptcp_expand_seq net/mptcp/options.c:1030 [inline] mptcp_expand_seq net/mptcp/protocol.h:864 [inline] ack_update_msk net/mptcp/options.c:1060 [inline] mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550 __tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] ---truncated--- | 15 Oct |
| CVE-2024-50095 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs | 15 Oct |
| CVE-2024-38565 | 5.5 medium | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: enable proper endpoint verification Syzkaller reports [1] hitting a warning about an endpoint in use not having an expected type to it. Fix the issue by checking for the existence of all proper endpoints with their according types intact. Sadly, this patch has not been tested on real hardware. [1] Syzkaller report: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> ar5523_cmd+0x41b/0x780 drivers/net/wireless/ath/ar5523/ar5523.c:275 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline] ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline] ar5523_probe+0x14b0/0x1d10 drivers/net/wireless/ath/ar5523/ar5523.c:1655 usb_probe_interface+0x30f/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_set_configuration+0x101d/0x1900 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xbe/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd8/0x2c0 drivers/usb/core/driver.c:293 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_new_device.cold+0x685/0x10ad drivers/usb/core/hub.c:2573 hub_port_connect drivers/usb/core/hub.c:5353 [inline] hub_port_connect_change drivers/usb/core/hub.c:5497 [inline] port_event drivers/usb/core/hub.c:5653 [inline] hub_event+0x26cb/0x45d0 drivers/usb/core/hub.c:5735 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> | 15 Oct |
| CVE-2024-35884 | 5.5 medium | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: udp: do not accept non-tunnel GSO skbs landing in a tunnel When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560 | 15 Oct |
| CVE-2022-48303 | 5.5 medium | 1.0% | gnu, fedoraproject, tar, fedora | GNU Tar through 1.34 has a one-byte out-of-bounds read that results in use of uninitialized memory for a conditional jump. Exploitation to change the flow of control has not been demonstrated. The issue occurs in from_header in list.c via a V7 archive in which mtime has approximately 11 whitespace characters. | 14 Oct |
| CVE-2020-13631 | 5.5 medium | 1.0% | sqlite, fedoraproject, fedora, ubuntu_linux | SQLite before 3.32.0 allows a virtual table to be renamed to the name of one of its shadow tables, related to alter.c and build.c. | 14 Oct |
| CVE-2020-12769 | 5.5 medium | 1.0% | linux, debian, linux_kernel, debian_linux, ubuntu_linux | An issue was discovered in the Linux kernel before 5.4.17. drivers/spi/spi-dw.c allows attackers to cause a panic via concurrent calls to dw_spi_irq and dw_spi_transfer_one, aka CID-19b61392c5a8. | 8 Oct |
| CVE-2026-26032 | 5.4 medium | 1.0% | apache, ivy | The PackagerResolver of Apache Ivy is able to download online artifacts and to (re)package them in a format defined by a packager.xml file. This repackaging is done by an Ant script, which is stored in a subdirectory of the configured "buildRoot" directory. This subdirectory is calculated based on modules coordinates, like the organisation, name or version. If one of the coordinates contains "../" sequences - which are valid characters for Ivy coordinates in general- it is possible to break out of the configured "buildRoot" directory where other files can be overwritten. In order to exploit this vulnerability an attacker needs to have access to a packager repository and add or modify the coordinates in ivy.xml files to have such "../" sequences. Users of Apache Ivy 2.0.0 to 2.5.3 (inclusive) should upgrade to Ivy 2.6.0. | Sat 24 Oct |
| CVE-2026-55605 | 5.3 medium | 1.0% | no CPE yet | DeepSeek MCP Server is an MCP server for DeepSeek V4. Starting in version 1.4.2 and prior to version 1.8.0, the self-hosted HTTP transport of `@arikusi/deepseek-mcp-server` exposes `POST /mcp` without any authentication: `createMcpExpressApp` is called without an `authProvider` and no middleware guards the route, so any network-reachable client can issue an unauthenticated `initialize` request and obtain a valid MCP session identifier. In reproduced testing against commit `5e1302171e99`, an unauthenticated client was able to initialize a session, enumerate tools, and invoke the local `deepseek_sessions` tool with no credentials. The same unauthenticated session also exposes `deepseek_chat`, whose handler uses the server-side `DEEPSEEK_API_KEY` when self-hosted deployments configure one. This issue applies to self-hosted HTTP mode, not the separately documented hosted BYOK endpoint in `README.md`, which expects an `Authorization: Bearer ...` header. Upstream self-hosted container assets enable HTTP mode by default (`Dockerfile`) and publish port `3000` (`docker-compose.yml`). Version 1.8.0 contains a patch for this issue. | Sun 25 Oct |
| CVE-2026-69207 | 5.3 medium | 1.0% | no CPE yet | Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.34, the built-in CORS middleware, hono/cors, is vulnerable to a regular expression denial of service (ReDoS). During a preflight OPTIONS request, the middleware parses the attacker-controlled Access-Control-Request-Headers header using a whitespace-tolerant regular expression whose backtracking makes its running time quadratic in the input length. Because the header value is bounded only by the deployment's maximum HTTP header size, a single preflight carrying a long run of whitespace can consume seconds of CPU and block request processing. On runtimes that share one execution thread across requests, this stalls concurrent requests as well, and repeated requests can render the service unresponsive. This affects the default configuration, since the vulnerable path is reached whenever cors() is used with an unset or empty allowHeaders. Applications that set a non-empty allowHeaders are not affected. This issue is fixed in version 4.12.34. | Sat 24 Oct |
| CVE-2026-71391 | 5.3 medium | 1.0% | no CPE yet | GNU Emacs for Android contains an off-by-one error in the gvar table parser in src/sfnt.c. The shared-coordinate index boundary check in sfnt_vary_simple_glyph() and sfnt_vary_compound_glyph() uses a strict greater-than comparison instead of greater-than-or-equal, allowing a crafted TrueType variable font to bypass the check and trigger a heap-based out-of-bounds read via memcpy. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This exposes heap memory contents which can be later used to defeat ASLR. This issue was fixed in commit 95ab9ef627b212d74d321c5bbb5b56a1be7b9fbe | Sat 24 Oct |
| CVE-2023-33524 | 5.3 medium | 1.0% | advent, tamale_rms | Advent/SSC Inc. Tamale RMS < 23.1 is vulnerable to Directory Traversal. If one traverses to the affected URL, one enumerates Contact information on the host which contains usernames, e-mail addresses, and other internal information stored within the web app. | 23 Oct |
| CVE-2026-52732 | 5.3 medium | 1.0% | no CPE yet | ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, one unauthenticated P2P peer can monopolize all 25 MAX_INBOUND_CONCURRENCY slots in Zebra's inbound mempool download and verification pipeline. In zebrad/src/components/mempool/downloads.rs, the bounded queue was shared globally without per-peer accounting, while peer identity was not carried through Gossip and FullQueue responses were mapped to Response::Nil instead of reaching overload disconnection handling. An attacker can advertise fake transaction identifiers and remain silent so each task holds a slot until TRANSACTION_DOWNLOAD_TIMEOUT, then periodically refill the queue as slots expire. While saturated, honest peer transactions and local sendrawtransaction requests are rejected with MempoolError::FullQueue, although block validation and synchronization continue. This issue is fixed in version 4.5.0. | 22 Oct |
| CVE-2026-42015 | 5.3 medium | 1.0% | no CPE yet | A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts. | 14 Oct |
| CVE-2026-105241 | 5.3 medium | 1.0% | apache, log4net | Improper Handling of Unicode Encoding vulnerability in the SmtpPickupDirAppender of Apache log4net. Content that the mail file writer cannot encode, such as an unpaired UTF-16 surrogate, made the write throw. Every buffered event in the batch was discarded, not only the one carrying the content, and a truncated mail could be left in the pickup directory. A party whose data reaches a log message could suppress the records of other events. Only applications that use SmtpPickupDirAppender are affected. This issue affects Apache log4net: from 1.2.9 before 3.5.0. Users are recommended to upgrade to version 3.5.0, which fixes the issue. | 9 Oct |
| CVE-2026-75806 | 5.3 medium | 1.0% | openssl | Issue summary: An established DTLS 1.2 association using an AEAD cipher suite can be terminated by a single unauthenticated datagram whose encrypted fragment is shorter than the mandatory explicit IV and authentication tag overhead. Impact summary: An attacker who can send a datagram that is routed to an existing DTLS 1.2 association can tear that association down without knowing any key material. This is a Denial of Service limited to the targeted association. There is no memory safety or confidentiality impact. CWE: CWE-1284: Improper Validation of Specified Quantity in Input Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher suite carries an explicit IV followed by the ciphertext and an authentication tag. When decrypting such a record the record layer passed the record length to the cipher implementation before checking that the record was long enough to contain the explicit IV and the tag. For a record shorter than that overhead the cipher implementation rejected the impossible length, and the record layer treated this as an internal failure and raised a fatal internal_error alert instead of treating the record as one that failed authentication. In TLS 1.2 the same record causes a fatal internal_error alert instead of the expected bad_record_mac alert. Since any undecryptable record already terminates a TLS connection, this is a protocol conformance issue rather than a security issue in TLS. The fix validates the record length against the explicit IV and tag length before any AEAD processing, so that TLS reports bad_record_mac and DTLS silently discards the record. FIPS impact: no The affected code is outside the FIPS module boundary. | 8 Oct |
| CVE-2026-56450 | 5.1 medium | 1.0% | no CPE yet | AIL did not restrict repeated failed attempts to verify a two-factor authentication (OTP) code. An attacker who had reached the 2FA verification step, such as after successfully completing the password-authentication stage, could submit an unlimited number of OTP guesses. This could enable brute-force guessing of a valid code and bypass the intended second authentication factor, resulting in unauthorized account access. The patch introduces per-user failed-OTP tracking, blocks verification after 30 failed attempts for one hour, clears the counter after a successful OTP verification, and provides administrator recovery actions to purge affected lockouts. | Sun 25 Oct |
| CVE-2026-105963 | 5.1 medium | 1.0% | no CPE yet | Externally-Generated Error Message Containing Sensitive Information vulnerability in plug_crypto in elixir-plug plug_crypto allows an unauthenticated remote attacker to expose the secret key base through application logs via a wrong-typed argument. Every public function in Plug.Crypto validates argument types in a function-head guard. A failed guard makes the Erlang VM raise FunctionClauseError with the actual argument values in the top stack frame, so the secret key base, a derived key, or the value an API key is compared against lands in that frame. The library's rescue blocks and Plug.Crypto.prune_args_from_stacktrace/1 only reach exceptions raised inside a function body, so they never see a guard failure. Plug.Cowboy and Bandit write the frame to the error log and attach it as crash_reason Logger metadata, which error trackers forward. Two entry points take request data. Plug.Crypto.verify/4 exposes the secret key base when the token is neither a binary nor nil, which Phoenix.Token.verify/4 reaches because it forwards the token unguarded. Plug.Crypto.secure_compare/2 exposes the other operand when one side is not a binary, as happens when a missing request header yields nil. Reading the leaked value needs separate access to the logs or the error tracker, so the request alone does not disclose the secret to the attacker. This issue affects plug: from 1.6.3 before 1.7.0; plug_crypto: from 1.0.0 before 2.2.1. | 23 Oct |
| CVE-2026-42006 | 4.3 medium | 1.0% | dovecot, open-xchange | An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. | Mon 26 Oct |
| CVE-2022-30115 | 4.3 medium | 1.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL. | 14 Oct |
| CVE-2025-58056 | 2.9 low | 1.0% | netty | Netty is an asynchronous event-driven network application framework for development of maintainable high performance protocol servers and clients. In versions 4.1.124.Final, and 4.2.0.Alpha3 through 4.2.4.Final, Netty incorrectly accepts standalone newline characters (LF) as a chunk-size line terminator, regardless of a preceding carriage return (CR), instead of requiring CRLF per HTTP/1.1 standards. When combined with reverse proxies that parse LF differently (treating it as part of the chunk extension), attackers can craft requests that the proxy sees as one request but Netty processes as two, enabling request smuggling attacks. This is fixed in versions 4.1.125.Final and 4.2.5.Final. | 19 Oct |
| CVE-2026-105931 | 2.3 low | 1.0% | no CPE yet | The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected. As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement. The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant. The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure. | 17 h ago |
| CVE-2026-66843 | 2.3 low | 1.0% | rrrene, htmlsanitizeex | Inclusion of Functionality from Untrusted Control Sphere vulnerability in the HTML5 scrubber in rrrene html_sanitize_ex allows a remote attacker to load a document of their choosing into a trusted page via the data attribute of an <object> element in sanitized HTML. object is the one URI-bearing element in lib/html_sanitize_ex/scrubber/html5.ex never registered through allow_tag_with_uri_attributes/3, and its only guard is a prefix match on lowercase "javascript:", so mixed-case variants, data: URIs, protocol-relative URLs and same-origin paths all survive. This is not unconditional cross-site scripting. A javascript: URL does not execute through <object data> in current browsers, data: documents load in an opaque origin, and host-origin script execution additionally requires the application to serve attacker-controlled content from a same-origin path. This issue affects html_sanitize_ex: from 0.3.1 before 1.4.5 and from 1.5.0-rc.0 before 1.5.3. | Sat 24 Oct |
| CVE-2026-105932 | 2.3 low | 1.0% | no CPE yet | The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions. As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. The practical impact is limited by two broker configuration requirements, neither of which is met by default: - Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker. - Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch. In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints. This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 3.3.x and 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch. | 23 Oct |
| CVE-2026-16498 | 10.0 critical | 0.00% | no CPE yet | The terraform-mcp-server before version 1.1.0 is vulnerable to a cross-tenant credential reuse issue in the streamable-HTTP stateless transport mode that may allow one user's Terraform token to be used to execute tool calls on behalf of subsequent users. This vulnerability, CVE-2026-16498, is fixed in terraform-mcp-server 1.1.0. | 23 Oct |
| CVE-2025-11925 | 10.0 critical | 0.00% | azure-access, blu-ic2_firmware, blu-ic4_firmware | Incorrect Content-Type header in one of the APIs (`text/html` instead of `application/json`) replies may potentially allow injection of HTML/JavaScript into reply.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5. | 18 Oct |
| CVE-2026-89309 | 10.0 critical | 0.00% | no CPE yet | The authorization middleware of the WMS MobileServer fails to require authentication in two distinct cases. First, it only requires an Authorization header for GET and HEAD requests; requests using any other HTTP method are processed without an authentication check. Second, for any HTTP method including GET and HEAD, a request carrying a malformed or non-bearer Authorization header is passed through without a valid token being required. The middleware does validate a token whenever a well-formed one is present, but in these two cases it does not require one. A remote attacker with network access to the service can therefore invoke API functionality without valid credentials. | 16 Oct |
| CVE-2026-40089 | 9.9 critical | 0.00% | sonicverse, radio_audio_streaming_stack | Sonicverse is a Self-hosted Docker Compose stack for live radio streaming. The Sonicverse Radio Audio Streaming Stack dashboard contains a Server-Side Request Forgery (SSRF) vulnerability in its API client (apps/dashboard/lib/api.ts). Installations created using the provided install.sh script (including the one‑liner bash <(curl -fsSL https://sonicverse.short.gy/install-audiostack)) are affected. In these deployments, the dashboard accepts user-controlled URLs and passes them directly to a server-side HTTP client without sufficient validation. An authenticated operator can abuse this to make arbitrary HTTP requests from the dashboard backend to internal or external systems. This vulnerability is fixed with commit cb1ddbacafcb441549fe87d3eeabdb6a085325e4. | Mon 26 Oct |
| CVE-2026-115931 | 9.9 critical | 0.00% | no CPE yet | Postiz lets a signed-in user ask the backend to run a function on one of their connected channels. The backend did not restrict which functions can be requested, so a user could call internal helper functions that were never meant to be reachable from the web interface. One of those helpers reads a file from the server's disk. A user who connects a channel whose stored token is a file path can have the backend return the contents of any file it can read, including its environment, which holds the secret used to sign login sessions, the database address and the credentials of connected services. Another helper makes the backend process exit with a single request. Self-registration is open by default, so no existing account and no action by another user is needed. | Mon 26 Oct |
| CVE-2026-115933 | 9.9 critical | 0.00% | no CPE yet | Postiz signs its session, invitation and password reset tokens with one shared secret and without any marker of what a token is for. A route that refreshes the credentials of a browser-extension channel signed data taken from the request itself and stored the result where the requesting user can read it back. A user could therefore obtain a validly signed token containing any claims they choose, which the application accepts as a session, as an organization invitation with a chosen role, as a password reset or as an enterprise provisioning token. A second, narrower route that creates team invitations signs extra fields from the request body in the same way. | Mon 26 Oct |
| CVE-2026-44935 | 9.9 critical | 0.00% | suse, rancher_fleet | Missing validation of "valuesFrom" references in Helm Deployer of SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 could be used by owners of one tenant to access fleet credentials of other tenants. | Sun 25 Oct |
| CVE-2025-12419 | 9.9 critical | 0.00% | mattermost, mattermost_server | Mattermost versions 10.12.x <= 10.12.1, 10.11.x <= 10.11.4, 10.5.x <= 10.5.12, 11.0.x <= 11.0.3 fail to properly validate OAuth state tokens during OpenID Connect authentication which allows an authenticated attacker with team creation privileges to take over a user account via manipulation of authentication data during the OAuth completion flow. This requires email verification to be disabled (default: disabled), OAuth/OpenID Connect to be enabled, and the attacker to control two users in the SSO system with one of them never having logged into Mattermost. | 19 Oct |
| CVE-2026-63377 | 9.8 critical | — | fctr-id, okta-ai-agent | TAKO AI Agent for Okta is a local-first AI agent that helps Okta administrators query tenant data using natural language. Prior to 3.0.1-beta, `POST /api/auth/setup` in `src/api/routers/auth.py` allows an unauthenticated network attacker to create the first administrator account before the legitimate owner completes initial setup. The `initial_setup` function checks only the `is_setup` completion flag and requires no authentication, one-time bootstrap token, or network restriction. The default `docker-compose.yml` publishes port 8001 on all interfaces, the `Dockerfile` starts the listener on 0.0.0.0, and `src/api/main.py` mounts the authentication router without a global authentication guard. The endpoint invokes `create_auth_user` with `UserRole.ADMIN` and `set_auth_cookie`, issuing a valid `fctr_session` JWT cookie. Localhost-only CORS rules do not restrict non-browser HTTP clients, and the setup operation does not require access to a real Okta tenant. The attacker becomes the sole administrator and prevents legitimate first-run setup, can read Okta-synced user data, API tokens, chat history, and application configuration, modify users and Okta integration credentials, and lock out administrators or disable the service. Already completed setup is rejected. This issue is fixed in version 3.0.1-beta. | 13 h ago |
| CVE-2026-72889 | 9.8 critical | 0.00% | no CPE yet | Net::OAuth versions before 0.33 for Perl allow the sender to choose the signature algorithm in verify. verify resolves the signature method class from the signature_method parameter of the incoming message. signature_method is required on every request, so the algorithm used to check a signature is chosen by whoever sent it, and nothing lets the verifying party pin the method instead. When a message names HMAC-SHA1 or HMAC-SHA256, the key is derived from consumer_secret and token_secret rather than from the key the provider deployed. A provider deployed on RSA-SHA1 holds only the consumer public key, and RFC 5849 does not use consumer_secret for that method, so the required parameter is filled with a placeholder. A client that names HMAC-SHA1 instead has its signature checked against that placeholder, so a guessable one is enough to forge requests for any consumer key and token. | Tue 27 Oct |
| CVE-2026-33608 | 9.8 critical | 0.00% | powerdns, authoritative | An attacker can send a notify request that causes a new secondary domain to be added to the bind backend, but causes said backend to update its configuration to an invalid one, leading to the backend no longer able to run on the next restart, requiring manual operation to fix it. | Mon 26 Oct |
| CVE-2026-57433 | 9.8 critical | 0.00% | nwclark, storable | Storable versions before 3.41 for Perl have a signed integer overflow when deserializing a crafted SX_HOOK record. retrieve_hook_common reads a signed 32-bit item count from an SX_HOOK record and calls av_extend with that count plus one. A count of I32_MAX wraps the addition to a negative value. A crafted blob passed to thaw or retrieve triggers the overflow; av_extend receives the negative count and dies with a panic, terminating the deserialization. | Sat 24 Oct |
| CVE-2026-99078 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until an MPWQE is refilled. If XSK allocation then returns -ENOMEM, actual_wq_head is not advanced and a later NAPI poll retries the same WQE. mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On retry it can therefore call xsk_buff_free() again through stale pointers after the frames have returned to the XSK pool and been reallocated. Set all skip_release_bitmap bits in the common error path of mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A successful allocation already clears the bitmap after replacing every buffer, so retries become idempotent without changing the success path. Fault injection forced three consecutive failures for one selected MPWQE. Both an early allocation failure and a partial 8-of-16-buffer unwind released the original 16 XSK buffers only once. Each error left a full bitmap, the following NAPI retry skipped the release, and a later successful allocation cleared it. A 20-second AF_XDP zero-copy pressure run exercised 1,575,262 buffer allocation failures without invalid descriptors, WQE errors, or kernel warnings. | Sat 24 Oct |
| CVE-2026-16504 | 9.8 critical | 0.00% | no CPE yet | Deployment of the VPS.org one-click Zulip template deploys a hardcoded application signing key, a default database password ("zulip"), and DISABLE_HTTPS=True. | 23 Oct |
| CVE-2026-89633 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | 21 Oct |
| CVE-2026-68426 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: fix stale skb->prev after async crypto steals a GSO segment skb_gso_segment() leaves the segment list head with ->prev pointing at the last segment, an invariant validate_xmit_skb_list() relies on when it sets its tail pointer (tail = skb->prev). When validate_xmit_xfrm() walks a GSO list and some segments are stolen by async crypto (->xmit() returns -EINPROGRESS), those segments are unlinked from the list but the head ->prev is never updated. If the last segment is the one stolen, the returned head still has ->prev pointing at it, even though it is now owned by the crypto engine and may be freed. validate_xmit_skb_list() later does tail->next = skb, writing through that stale pointer -- a use-after-free. Repoint skb->prev at the last retained segment before returning. | 21 Oct |
| CVE-2026-63978 | 9.8 critical | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request. | 21 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.