Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-44383 | 8.7 high | 1.0% | no CPE yet | Multiple connections to the backend using the same charging station ID are allowed, which could allow an attacker to deploy multiple instances of malicious OCPP clients to overwhelm the backend. | Sun 25 Oct |
| CVE-2026-70464 | 8.7 high | 1.0% | no CPE yet | rsync daemon 2.0.0 before 3.5.0 contains a denial of service vulnerability that allows unauthenticated remote attackers to exhaust daemon connection slots by stalling the handshake process before or after module selection without triggering the I/O timeout. Attackers can open many simultaneous connections and trickle data at the minimum rate to avoid timeout, or stall entirely before module selection where no timeout applies, consuming all available connection slots and denying service to legitimate clients. | Sat 24 Oct |
| CVE-2026-16756 | 8.7 high | 1.0% | no CPE yet | Missing connection and header-read timeouts and the absence of a concurrent-connection cap in the default serve() path of Amazon aws-smithy-http-server might allow remote attackers to cause a denial of service by opening many connections and sending partial requests that are never completed, exhausting server sockets and tasks. To mitigate this issue, users should upgrade to aws-smithy-http-server 0.66.5 or later. | Sat 24 Oct |
| CVE-2026-111613 | 8.7 high | 1.0% | no CPE yet | AllData through 0.7.1 contains an unauthenticated JDBC injection vulnerability that allows remote attackers to open arbitrary database connections by supplying jdbcUrl and jdbcDriverClass values to the data-dts /jobJdbcDatasource/test endpoint. Attackers can supply a MySQL JDBC URL with allowLoadLocalInfile=true pointing to an attacker-controlled server to read arbitrary files from the data-dts host. | Fri 23 Oct |
| CVE-2026-74836 | 8.7 high | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin an unbounded number of HTTP/2 stream processes indefinitely via connection-level flow control. When a stream's response body outruns the HTTP/2 connection-level send window (default 65,535 bytes, shared across all streams on the connection), Bandit.HTTP2.Connection queues the remaining bytes and a reply closure in pending_sends and the stream process blocks forever inside a synchronous call to the connection process. Nothing bounds that wait and nothing purges the queue: a client RST_STREAM for the blocked stream is delivered to its mailbox but never read while it is stuck inside the call, so cancelling frees nothing, and periodic PING frames keep the transport-level read timeout from ever firing. The equivalent block on the stream-level send window is already bounded at 15 seconds; the connection-level path had no such bound. Each stalled stream pins its process, Plug state, and any resource the Plug holds across the blocked write, such as a pooled upstream connection in a reverse-proxy Plug. The attacker chooses any endpoint whose response exceeds the connection window (common for most non-trivial payloads), grants a generous stream-level window so only the connection window limits it, and keeps the connection alive with periodic PINGs; the primitive is repeatable across streams and connections at the cost of one idle socket each. This issue affects bandit: from 0.3.4 before 1.12.5. | 18 Oct |
| CVE-2026-105659 | 8.7 high | 1.0% | no CPE yet | Uncontrolled Resource Consumption vulnerability in mtrudel bandit allows an unauthenticated remote attacker to pin HTTP/2 stream processes indefinitely via a trickle of small WINDOW_UPDATE frames. A stream whose response outruns the connection or stream send window blocks until the peer grants more window, and each block carries a 15 second deadline. Both deadlines restart whenever the peer makes partial progress. Bandit.HTTP2.Connection.finish_data/5 re-queues a partially advanced send in pending_sends with a fresh expires_at, so every WINDOW_UPDATE on stream 0, and every SETTINGS frame, resets the clock. Bandit.HTTP2.Stream.send_data/3 recurses on each stream WINDOW_UPDATE and re-arms a fresh after read_timeout. A peer that grants a few bytes every few seconds keeps the blocked stream process, its Plug state and any resource it holds mid-response alive for as long as it keeps dripping, and repeats this across streams and connections to exhaust server processes and memory. The two paths are independent. The stream-level block is reached on its own by widening the connection window with a large WINDOW_UPDATE on stream 0 and shrinking the per-stream window with a small SETTINGS_INITIAL_WINDOW_SIZE, so closing only the connection-level path leaves it exploitable. This issue affects bandit: from 1.4.0 before 1.13.0. | 16 Oct |
| CVE-2026-85450 | 8.7 high | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 contains a denial of service vulnerability in the MOOSDB HTTP server that creates unbounded connections and threads without limits. Attackers can open many connections and send endless header data to exhaust server threads and memory, causing service unavailability. | 14 Oct |
| CVE-2026-85443 | 8.7 high | 1.0% | themoos, core-moos | MOOS core-moos through 10.4.0 contains a denial of service vulnerability in MOOSCommServer::ListenLoop() where the accept thread performs a blocking receive without timeout during the wire-protocol handshake. An attacker can open a TCP connection to the MOOSDB port and send no data, causing the accept thread to block indefinitely while holding the socket-list lock, preventing all subsequent client connections. | 14 Oct |
| CVE-2025-41109 | 8.7 high | 1.0% | ghostrobotics, vision_60_firmware | Ghost Robotics Vision 60 v0.27.2 includes, among its physical interfaces, three RJ45 connectors and a USB Type-C port. The vulnerability is due to the lack of authentication mechanisms when establishing connections through these ports. Specifically, with regard to network connectivity, the robot's internal router automatically assigns IP addresses to any device physically connected to it. An attacker could connect a WiFi access point under their control to gain access to the robot's network without needing the credentials for the deployed network. Once inside, the attacker can monitor all its data, as the robot runs on ROS 2 without authentication by default. | 8 Oct |
| CVE-2025-62420 | 8.2 high | 1.0% | dataease | DataEase is a data visualization and analytics platform. In DataEase versions through 2.10.13, a JDBC driver bypass vulnerability exists in the H2 database connection handler. The getJdbc function in H2.java checks if the jdbcUrl starts with jdbc:h2 but returns a separate jdbc field as the actual connection URL. An attacker can provide a jdbcUrl that starts with jdbc:h2 while supplying a different jdbc field with an arbitrary JDBC driver and connection string. This allows an authenticated attacker to trigger arbitrary JDBC connections with malicious drivers, potentially leading to remote code execution. The vulnerability is fixed in version 2.10.14. No known workarounds exist. | 19 Oct |
| CVE-2026-18129 | 8.1 high | 1.0% | no CPE yet | Cleartext transmission of sensitive information in the Core of Ivanti Endpoint Manager before version 2024 SU7 allows a remote unauthenticated attacker in a MITM position to leak credentials for external SQL connections. | Fri 23 Oct |
| CVE-2026-98069 | 8.1 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces the transmit and receive-refill paths by waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and then runs the transport shutdown and rds_conn_path_reset(). Sampling the bits clear is not the same as owning them: the moment after the wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run concurrently with the teardown. The sender does recheck the connection state after taking the lock, but that recheck is a classic store-buffering pattern: teardown writes the state and reads the bit while the sender writes the bit and reads the state. acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write, and the transmit path then runs while the transport zeroes its rings (e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the transmit state under it. Oracle UEK fixed the same class of crashes - a 14-year tail of BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL dereferences in rds_ib_send_cqe_handler() during failover testing - by making the teardown path *acquire* the fastpath bit locks instead of testing them ("rds: Make sure transmit path and connection tear-down does not run concurrently"). Ownership of a single word is decided by RMW atomicity, so no cross-variable ordering is needed. Do the same here: take both locks before calling the transport shutdown, hold them across rds_conn_path_reset(), and release them explicitly with a wake-up afterwards. Both are released with clear_bit_unlock(), so that the ring re-initialization done by the transport shutdown and the transmit state rewritten by rds_send_path_reset() are ordered before either bit is seen clear by the next acquire_in_xmit() or acquire_refill(). The fastpath users of these bits - rds_send_xmit() and rds_ib_recv_refill() - are trylock style and back off while teardown owns the locks, so no new lock dependency is introduced for them. rds_tcp_reset_callbacks() is different: since the previous patch it acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now spans the teardown instead of at most one send batch. That waiter runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so a duelling SYN accepted while its path is being torn down parks accept processing for the duration of the teardown - for TCP bounded by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB path's drain in rds_ib_conn_path_shutdown() has no round cap, but no blocking waiter either: rds_tcp_reset_callbacks() is the only blocking acquirer of these bits and waits only on its own TCP path, and the fastpaths are trylock-and-back-off on both transports, so a long IB drain lengthens only that path's own quiesce. The window is narrow: the accept-side state check has to pass before the teardown moves the path to RDS_CONN_DISCONNECTING. Because krdsd is a single global workqueue, everything else queued there - accept processing for other connections and network namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop() during namespace teardown - waits behind the parked accept worker for that time. It cannot deadlock, although the waits do point at each other: the teardown blocks until the bit's holder releases it, and the holder may be that krdsd accept worker. The holder finishes without needing anything the teardown owns: the sync cancels rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on the path's ordered cp_wq, whose only execution slot is occupied by the blocked cp_down_w itself, so they are pending at most and cancel without flushing - a reliance on cp_wq being ordered that is now noted next to those cancels (on ---truncated--- | 19 Oct |
| CVE-2026-54204 | 7.7 high | 1.0% | no CPE yet | Tobit Laboratories AG TeamDavid's Webbox 's search functionality accepts a “pathnameroot” parameter, which can be set to network locations using UNC paths (e.g., “\\Server\Share”). The server processes these paths without validation, resulting in outbound connection attempts to attacker-controlled SMB servers. This enables unauthenticated attackers to trigger the server to authenticate to arbitrary SMB endpoints, potentially exposing NTLM authentication information (such as NTLM hashes). If outbound connections to port 445 (SMB) are permitted, attackers can use this to conduct SMB relay or credential theft attacks. Exploitation of the “pathnameroot” parameter is possible without authentication.This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | Sat 24 Oct |
| CVE-2026-83540 | 7.7 high | 1.0% | wolfssh | When password or public key authentication is used with the Windows port of wolfSSHd, the Windows logon token acquired for one authenticated connection is not released before a token is acquired for a subsequent connection, resulting in user login poisoning between connections. A less privileged user with a valid account on the server can exploit this to force a login as a more privileged user. The vulnerability was introduced with the initial Windows port of wolfSSHd in wolfSSH version 1.4.15 and affects all versions through 1.5.0. Non-Windows builds of wolfSSHd are not affected. | 13 Oct |
| CVE-2026-27857 | 7.5 high | 1.0% | dovecot, open-xchange | Sending "NOOP (((...)))" command with 4000 parenthesis open+close results in ~1MB extra memory usage. Longer commands will result in client disconnection. This 1 MB can be left allocated for longer time periods by not sending the command ending LF. So attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Install fixed version, there is no other remediation. No publicly available exploits are known. | Mon 26 Oct |
| CVE-2026-42587 | 7.5 high | 1.0% | netty | Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | Mon 26 Oct |
| CVE-2026-12413 | 7.5 high | 1.0% | libreswan | An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected. | Sun 25 Oct |
| CVE-2026-59725 | 7.5 high | 1.0% | socket, engine.io | Socket.IO enables bidirectional and low-latency communication for every platform. From 4.1.0 before 6.6.7, Engine.IO protocol v4 polling transport does not properly close the HTTP response for invalid binary POST requests with Content-Type: application/octet-stream, allowing an unauthenticated attacker to exhaust server-side connections and sockets. This issue is fixed in version 6.6.7. | Sun 25 Oct |
| CVE-2026-40006 | 7.5 high | 1.0% | no CPE yet | Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits or Throttling, Missing Authentication for Critical Function vulnerability in Apache IoTDB. When pipe_air_gap_receiver_enabled=true, the IoTDB AirGap pipe receiver accepts raw TCP connections on port 9780 with no authentication. The readLength method reads an attacker-controlled 32-bit integer from the socket and readData passes it directly to new byte[length] with no upper-bound check. An unauthenticated attacker can cause the JVM to attempt an allocation of up to 2,147,483,647 bytes per connection, exhausting heap memory and crashing or severely degrading the DataNode process. This issue affects Apache IoTDB: from 1.0.0 before 2.0.10. Users are recommended to upgrade to version 2.0.10, which fixes the issue. | Sun 25 Oct |
| CVE-2026-45713 | 7.5 high | 1.0% | axllent, mailpit | Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch. | Sat 24 Oct |
| CVE-2026-54538 | 7.5 high | 1.0% | neutrinolabs, xrdp | xrdp is an open source RDP server. In versions 0.10.6 and prior, a n issue was discovered where the software fails to properly validate the totalLength field within the RDP protocol control header during packet reception. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted packet that forces the xrdp process or thread into an infinite, CPU-bound loop. Because the internal pointer fails to advance and the deadlock prevention mechanism is bypassed for specific protocol data unit types, the process consumes excessive CPU resources indefinitely. This can render the xrdp service unavailable and potentially lead to system-wide resource exhaustion if multiple malicious connections are established. This issue has been fixed in version 0.10.6.1. | Sat 24 Oct |
| CVE-2026-59675 | 7.5 high | 1.0% | no CPE yet | When API audit logging is enabled, the middleware reads the entire HTTP request body into memory without enforcing a size limit on login endpoints. Because the audit middleware is positioned earlier in the handler chain than Rancher's APIBodyLimitingHandler, the body-size cap (default 1 MiB) is bypassed for requests that pass through the audit copyReqBody path. An unauthenticated attacker can send arbitrarily large request bodies to the public login endpoints, causing the Rancher Manager server process to allocate memory proportional to the supplied body size. With just a few concurrent connections, this can exhaust available memory and terminate the Rancher Manager plane process, making the Rancher API and UI unavailable and interrupting management of all downstream clusters. | Sat 24 Oct |
| CVE-2026-73561 | 7.5 high | 1.0% | no CPE yet | Hub is a Node.js WebSocket server and client with added features. Prior to 0.2.16, every incoming unauthenticated WebSocket connection triggers loadDefaultConnectionEventListeners to call requestClientId, which calls rpc.send for the get-client-id action and pushes a request into RPC.requests. The RPC.waitForReply function starts a setInterval polling loop every 10 milliseconds that is cleared only after a matching reply; if the client remains silent and closes, the timer and pending request stay allocated because the socket close path does not cancel them. Repeated connections therefore cause unbounded timers and heap entries, exhausting CPU and memory and making the server unavailable. This issue is fixed in version 0.2.16. | Sat 24 Oct |
| CVE-2026-110353 | 7.5 high | 1.0% | no CPE yet | HAProxy 3.2 before 3.4.6 allows a remote unauthenticated attacker to cause a denial of service (worker-thread CPU exhaustion) via a truncated HTTP/2 PING frame. h2c_handle_ping in src/mux_h2.c does not check for a short read, unlike the other H2 frame handlers. Because the incomplete frame cannot be processed, its data is never consumed, and the H2 multiplexer tasklet is repeatedly woken by that pending data without making progress. The CPU spins until timeout http-request closes the connection, and an attacker opening many such connections can sustain high CPU usage. | 22 Oct |
| CVE-2026-18358 | 7.5 high | 1.0% | no CPE yet | A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. When the daemon is running in system mode with RDP enabled, the incoming connection handler bypasses the connection throttler, allowing an unauthenticated remote attacker to open many parallel pre-authentication connections to the RDP listener. This can accumulate accepted sockets and pending routing-token operations until timeout, exhausting resources and preventing legitimate users from establishing RDP sessions. This issue does not affect the upstream version. | 20 Oct |
| CVE-2026-45860 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES | 19 Oct |
| CVE-2025-43413 | 7.5 high | 1.0% | apple, safari, ipados, iphone_os | An access issue was addressed with additional sandbox restrictions. This issue is fixed in iOS 26.1 and iPadOS 26.1, macOS Sequoia 15.7.2, macOS Sonoma 14.8.2, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. A sandboxed app may be able to observe system-wide network connections. | 18 Oct |
| CVE-2026-72418 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. | 16 Oct |
| CVE-2025-68206 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp helper gets assigned *after* the dnat setup. The inverse (nat after helper assign) is handled by an existing check in nf_nat_setup_info() and will not show the problem. Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ ftp nat changes do not work as expected in this case: Connected to 192.168.100.1. [..] ftp> epsv EPSV/EPRT on IPv4 off. ftp> ls 227 Entering passive mode (192,168,100,1,209,129). 421 Service not available, remote server has closed connection. Kernel logs: Missing nfct_seqadj_ext_add() setup call WARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41 [..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 .. Fix this by adding the required extension when a conntrack helper is assigned to a connection that has a nat binding. | 15 Oct |
| CVE-2026-31711 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | 15 Oct |
| CVE-2025-67635 | 7.5 high | 1.0% | jenkins | Jenkins 2.540 and earlier, LTS 2.528.2 and earlier does not properly close HTTP-based CLI connections when the connection stream becomes corrupted, allowing unauthenticated attackers to cause a denial of service. | 14 Oct |
| CVE-2026-96541 | 7.5 high | 1.0% | no CPE yet | A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed. | 14 Oct |
| CVE-2025-9611 | 7.2 high | 1.0% | no CPE yet | Microsoft Playwright MCP Server versions prior to 0.0.40 fails to validate the Origin header on incoming connections. This allows an attacker to perform a DNS rebinding attack via a victim’s web browser and send unauthorized requests to a locally running MCP server, resulting in unintended invocation of MCP tool endpoints. | 8 Oct |
| CVE-2025-71397 | 7.1 high | 1.0% | surrealdb | SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted. | 7 h ago |
| CVE-2026-42788 | 6.9 medium | 1.0% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in mtrudel bandit allows unauthenticated memory exhaustion via oversized HTTP/2 frames. 'Elixir.Bandit.HTTP2.Frame':deserialize/2 in lib/bandit/http2/frame.ex checks the SETTINGS_MAX_FRAME_SIZE limit only after pattern-matching payload::binary-size(length), which requires the entire frame body to be present in memory before either the accept or reject clause can fire. A peer that announces a frame length up to the 24-bit maximum (~16 MiB) causes the server to buffer that entire body before the size guard is evaluated, regardless of the max_frame_size negotiated during the HTTP/2 handshake (default 16 KiB per RFC 9113). An unauthenticated attacker holding many concurrent connections can force the server to buffer far more memory than the negotiated frame size limit should permit, leading to memory pressure and potential denial of service. This issue affects bandit: from 0.3.6 before 1.11.0. | Mon 26 Oct |
| CVE-2026-56787 | 6.9 medium | 1.0% | rtklib | RTKLIB through 2.4.3 contains an off-by-one out-of-bounds read vulnerability in the decode_ssr3 function at src/rtcm3.c:1446 that allows remote attackers to trigger a global buffer overflow via crafted RTCM3 SSR messages with attacker-controlled signal mode fields. Remote attackers can exploit this vulnerability by sending malicious SSR correction streams over NTRIP or serial connections to cause denial of service or crash RTKLIB rovers and CORS servers. | Sun 25 Oct |
| CVE-2026-57575 | 6.9 medium | 1.0% | no CPE yet | Misskey is an open source, federated social media platform. Prior to 2026.6.0, Misskey contains a Server-Side Request Forgery (SSRF) vulnerability in URL preview functionality in UrlPreviewService. Due to missing network restrictions before establishing outbound connections, a remote attacker can cause the Misskey server to initiate HTTP requests to loopback, private, or link-local services. Because IP address validation takes place after the request has been sent and the process is subsequently rejected, no sensitive internal data is believed to be transmitted back or exposed to the attacker. This issue is fixed in version 2026.6.0. | Sun 25 Oct |
| CVE-2026-16318 | 6.9 medium | 1.0% | no CPE yet | The QUIC transport parameters extension handler in s2n-tls incorrectly uses s2n_alloc instead of s2n_realloc to store the peer's transport parameters. When a TLS 1.3 connection goes through a HelloRetryRequest, the handler is called twice on the same connection. On the second call, s2n_alloc zeroes the existing pointer before allocating new memory, causing the first allocation to be leaked. This can occur during normal QUIC traffic when a client offers a key share group the server does not prefer. An unauthenticated user can amplify the issue by deliberately forcing HelloRetryRequests, causing up to approximately 64 KB of unreachable memory per handshake. Over time, this can lead to increased memory consumption on long-running server processes. The unreachable memory is only reclaimed when the process is restarted. Only server-side QUIC-enabled deployments are affected. Non-QUIC TLS connections are not affected. We recommend you upgrade s2n-tls to version v1.7.6 | Sat 24 Oct |
| CVE-2026-110491 | 6.9 medium | 1.0% | no CPE yet | The ONVIF service on the E3 can be rendered unresponsive by sending malformed or incomplete requests to certain operations. The affected service stops accepting new connections while the rest of the device continues operating normally, and will recover automatically after a period. This can be triggered repeatedly by any unauthenticated party with network access to the device. | Fri 23 Oct |
| CVE-2026-25219 | 6.5 medium | 1.0% | apache, airflow | The `access_key` and `connection_string` connection properties were not marked as sensitive names in secrets masker. This means that user with read permission could see the values in Connection UI, as well as when Connection was accidentaly logged to logs, those values could be seen in the logs. Azure Service Bus used those properties to store sensitive values. Possibly other providers could be also affected if they used the same fields to store sensitive data. If you used Azure Service Bus connection with those values set or if you have other connections with those values storing sensitve values, you should upgrade Airflow to 3.1.8 | Mon 26 Oct |
| CVE-2026-54695 | 6.5 medium | 1.0% | pipecat | Pipecat is an open-source Python framework for building real-time voice and multimodal conversational agents. Prior to 1.4.0, the pipecat development runner registers a /ws WebSocket endpoint for telephony testing that accepts connections without authentication, reads an attacker-supplied callSid from a Twilio stream-start handshake in src/pipecat/runner/utils.py, and passes it to TwilioFrameSerializer so the server can issue an authenticated Twilio REST API hang-up request with the server operator's credentials; equivalent unauthenticated call-control sinks exist for Telnyx and Plivo. This issue is fixed in version 1.4.0. | Sun 25 Oct |
| CVE-2026-68868 | 6.5 medium | 1.0% | apache, apache-airflow-providers-google | The Google Cloud Secret Manager secrets backend in Apache Airflow's Google provider never applied the team scope when resolving Connections and Variables: the caller's `team_name` was accepted by the backend but dropped at the internal call boundary, so every lookup resolved against the team-agnostic secret name. In a deployment running multi-team mode with this backend, a task or Dag belonging to one team resolved another team's Connection or Variable, obtaining its credentials in full. No unusual configuration is required beyond enabling multi-team mode and using this backend. Users are advised to upgrade to apache-airflow-providers-google 22.3.0 or later, which builds and applies the team-scoped secret name. | Sat 24 Oct |
| CVE-2024-2466 | 6.5 medium | 1.0% | haxx, apple, curl, macos, h700s_firmware | libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS. libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc). | 15 Oct |
| CVE-2025-54831 | 6.5 medium | 1.0% | apache, airflow | Apache Airflow 3 introduced a change to the handling of sensitive information in Connections. The intent was to restrict access to sensitive connection fields to Connection Editing Users, effectively applying a "write-only" model for sensitive values. In Airflow 3.0.3, this model was unintentionally violated: sensitive connection information could be viewed by users with READ permissions through both the API and the UI. This behavior also bypassed the `AIRFLOW__CORE__HIDE_SENSITIVE_VAR_CONN_FIELDS` configuration option. This issue does not affect Airflow 2.x, where exposing sensitive information to connection editors was the intended and documented behavior. Users of Airflow 3.0.3 are advised to upgrade Airflow to >=3.0.4. | 11 Oct |
| CVE-2026-34477 | 6.3 medium | 1.0% | apache, log4j | The fix for CVE-2025-68161 https://logging.apache.org/security.html#CVE-2025-68161 was incomplete: it addressed hostname verification only when enabled via the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property, but not when configured through the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName attribute of the <Ssl> element. Although the verifyHostName configuration attribute was introduced in Log4j Core 2.12.0, it was silently ignored in all versions through 2.25.3, leaving TLS connections vulnerable to interception regardless of the configured value. A network-based attacker may be able to perform a man-in-the-middle attack when all of the following conditions are met: * An SMTP, Socket, or Syslog appender is in use. * TLS is configured via a nested <Ssl> element. * The attacker can present a certificate issued by a CA trusted by the appender's configured trust store, or by the default Java trust store if none is configured. This issue does not affect users of the HTTP appender, which uses a separate verifyHostname https://logging.apache.org/log4j/2.x/manual/appenders/network.html#HttpAppender-attr-verifyHostName attribute that was not subject to this bug and verifies host names by default. Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue. | Mon 26 Oct |
| CVE-2026-39807 | 6.3 medium | 1.0% | no CPE yet | Reliance on Untrusted Inputs in a Security Decision vulnerability in mtrudel bandit allows unauthenticated transport-state spoofing on plaintext HTTP connections. 'Elixir.Bandit.Pipeline':determine_scheme/2 in lib/bandit/pipeline.ex returns the client-supplied URI scheme verbatim, ignoring the transport's secure? flag. HTTP/1.1 absolute-form request targets (e.g. GET https://victim/path HTTP/1.1) and the HTTP/2 :scheme pseudo-header are both attacker-controlled strings that flow through this function. Over a plaintext TCP connection, a client can declare https and Bandit will set conn.scheme = :https even though no TLS was negotiated. Downstream Plug consumers that branch on conn.scheme are silently misled: Plug.SSL's already-secure branch skips its HTTP→HTTPS redirect, cookies emitted with secure: true are sent over plaintext, audit logs record requests as having arrived over HTTPS, and CSRF/SameSite gating may make incorrect decisions. This issue affects bandit: from 1.0.0 before 1.11.0. | Mon 26 Oct |
| CVE-2026-43971 | 6.3 medium | 1.0% | no CPE yet | Improper Encoding or Escaping of Output vulnerability in ninenines cowlib allows Link header directive smuggling via unescaped special characters in cow_link:link/1. cow_link:do_link/1 in cowlib interpolates the target URI, rel value, and attribute keys directly into the serialized Link: header value without escaping or token-grammar validation. A > byte in target prematurely closes the URI slot, allowing an attacker to append additional link entries with attacker-chosen rel directives. A " or \ in rel escapes the quoted string and opens new parameters. Any byte — including whitespace, =, and " — in an attribute key is emitted verbatim. Because browsers act on Link: directives such as rel="preconnect", rel="preload", and rel="prerender", an attacker who can influence these fields in an application that round-trips parsed Link headers through cow_link:link/1 can force victim browsers to make out-of-band connections to attacker-controlled origins. This issue affects cowlib: from 2.9.0 before 2.20.0. | 22 Oct |
| CVE-2026-12233 | 5.9 medium | 1.0% | no CPE yet | The PSA Protected Storage credential backend (subsys/net/lib/tls_credentials/tls_credentials_trusted.c) declared its credential-store mutex as a plain zero-filled static struct k_mutex credential_lock; and never called k_mutex_init() on it. A statically zero-filled k_mutex has an uninitialized wait queue (its dlist head/tail are NULL instead of the self-referential sentinels that k_mutex_init/K_MUTEX_DEFINE install). The uncontended lock path does not touch the wait queue, so the defect is latent and serialized use behaves correctly. When two execution contexts contend on the lock, k_mutex_lock() pends the blocking thread on the wait queue via z_pend_curr(), which calls sys_dlist_append() on the zeroed list and dereferences a NULL tail pointer (tail->next = node), faulting the kernel. The lock is held during TLS handshake credential loading and by all credential add/get/delete operations, so a deployment performing concurrent TLS handshakes (for example a server handling multiple simultaneous connections from a remote peer) or a credential-management operation concurrent with a handshake can trigger the dereference. The impact is a denial of service: a deterministic kernel panic / device reset on the first contention. There is no memory corruption beyond the NULL dereference and no confidentiality or integrity impact; mutual exclusion on the fast path remains correct. Exposure is limited to builds with CONFIG_TLS_CREDENTIALS_BACKEND_PROTECTED_STORAGE enabled (PSA Protected Storage / TF-M platforms); the default volatile RAM backend initializes its lock correctly and is unaffected. The fix initializes the mutex statically with K_MUTEX_DEFINE(credential_lock), providing a valid wait queue so the contended path no longer touches a NULL list. | Fri 23 Oct |
| CVE-2023-27538 | 5.5 medium | 1.0% | haxx, fedoraproject, libcurl, fedora, debian_linux | An authentication bypass vulnerability exists in libcurl prior to v8.0.0 where it reuses a previously established SSH connection despite the fact that an SSH option was modified, which should have prevented reuse. libcurl maintains a pool of previously used connections to reuse them for subsequent transfers if the configurations match. However, two SSH settings were omitted from the configuration check, allowing them to match easily, potentially leading to the reuse of an inappropriate connection. | 14 Oct |
| CVE-2026-63044 | 5.4 medium | 1.0% | apache, inlong | Server-Side Request Forgery (SSRF) vulnerability in Apache InLong. Any authenticated user (no admin role required) can cause the InLong Manager server to make outbound HTTP requests or TCP connections to arbitrary internal hosts and ports. This issue affects Apache InLong: from 2.0.0 before 2.4.0. Users are advised to upgrade to Apache InLong's 2.4.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/12130 . | 18 Oct |
Download these 386 as CSV · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.