Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2024-2379 | 6.3 medium | 2.0% | haxx, apple, curl, macos, active_iq_unified_manager | libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems. | 15 Oct |
| CVE-2023-28321 | 5.9 medium | 2.0% | haxx, debian, curl, debian_linux, fedora | An improper certificate validation vulnerability exists in curl <v8.1.0 in the way it supports matching of wildcard patterns when listed as "Subject Alternative Name" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`. | Fri 23 Oct |
| CVE-2022-27774 | 5.7 medium | 2.0% | haxx, debian, curl, debian_linux, hci_bootstrap_os | An insufficiently protected credentials vulnerability exists in curl 4.9 to and include curl 7.82.0 are affected that could allow an attacker to extract credentials when follows HTTP(S) redirects is used with authentication could leak credentials to other services that exist on different protocols or port numbers. | 14 Oct |
| CVE-2021-22923 | 5.3 medium | 2.0% | haxx, fedoraproject, curl, fedora, cloud_backup | When curl is instructed to get content using the metalink feature, and a user name and password are used to download the metalink XML file, those same credentials are then subsequently passed on to each of the servers from which curl will download or try to download the contents from. Often contrary to the user's expectations and intentions and without telling the user it happened. | 14 Oct |
| CVE-2023-28322 | 3.7 low | 2.0% | haxx, fedoraproject, curl, fedora, macos | An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST. | Fri 23 Oct |
| CVE-2024-2004 | 3.5 low | 2.0% | haxx, fedoraproject, curl, fedora, macos | When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. | 15 Oct |
| CVE-2024-11053 | 3.4 low | 2.0% | haxx, netapp, curl, ontap, ontap_select_deploy_administration_utility | When asked to both use a `.netrc` file for credentials and to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has an entry that matches the redirect target hostname but the entry either omits just the password or omits both login and password. | 15 Oct |
| CVE-2026-48085 | 9.8 critical | 1.0% | no CPE yet | OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.1, a fully provisioned OpenReception instance accepts unauthenticated POST requests to `/setup/create-admin-account` and creates additional GLOBAL_ADMIN accounts without verifying that an admin already exists. Any unauthenticated network attacker who can submit a same-origin form POST gains full platform-level administrative control. The newly created account is `is_active=true` with `confirmation_state=ACCESS_GRANTED` and does not require completing email confirmation; the GLOBAL_ADMIN row is created active and immediately usable. Login and tenant enumeration succeed without any further interaction. This is distinct from the deployment race condition already documented on the `Claiming an instance` page. That documented race covers the window between deployment and first claim. The bug reported here works after the operator has properly claimed and configured the instance: the layout-level guard that protects the setup page only redirects on GET, while the `default` form action handler creates the user without rechecking `adminExists()`. Three GLOBAL_ADMIN accounts were created in succession during testing, with no rate limiting observed. Audit-specific event logging beyond standard application logs was not assessed; the standard `[error]` line that surfaces only when a uniqueness conflict is hit is not the same as a security event for "additional admin created post-claim". The form post is rejected for browser drive-by CSRF by SvelteKit's built-in same-origin check, but any tool that supplies a matching `Origin` header (curl, Burp, automated scanners, server-side proxies) bypasses this trivially. No additional preconditions exist. Users should upgrade to version 1.0.1 to receive a patch. | Fri 23 Oct |
| CVE-2023-23914 | 9.1 critical | 1.0% | haxx, netapp, curl, active_iq_unified_manager, clustered_data_ontap | A cleartext transmission of sensitive information vulnerability exists in curl <v7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on. | 14 Oct |
| CVE-2025-34225 | 8.8 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a server-side request forgery (SSRF) vulnerability. The `console_release` directory is reachable from the internet without any authentication. Inside that directory are dozens of PHP scripts that build URLs from user‑controlled values and then invoke either 'curl_exec()` or `file_get_contents()` without proper validation. Although many files attempt to mitigate SSRF by calling `filter_var', the checks are incomplete. Because the endpoint is unauthenticated, any remote attacker can supply a hostname and cause the server to issue requests to internal resources. This enables internal network reconnaissance, potential pivoting, or data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34228 | 8.8 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a server-side request forgery (SSRF) vulnerability. The `/var/www/app/console_release/lexmark/update.php` script is reachable from the internet without any authentication. The PHP script builds URLs from user‑controlled values and then invokes either 'curl_exec()` or `file_get_contents()` without proper validation. Because the endpoint is unauthenticated, any remote attacker can supply a hostname and cause the server to issue requests to internal resources. This enables internal network reconnaissance, potential pivoting, or data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2026-109428 | 8.7 high | 1.0% | no CPE yet | Mistral Vibe before 2.25.5 contains a permission validation bypass vulnerability that allows attackers to execute unauthorized commands by exploiting a parsing discrepancy between tree-sitter-bash and bash in handling backslash-newline line continuations in the _extract_commands() function of bash.py. Attackers can craft a command string where tree-sitter-bash extracts only an allowlisted prefix such as cd while bash joins the line continuation into a materially different and hidden command such as a curl request, causing resolve_permission to grant ALWAYS permission while bash executes unauthorized arbitrary commands. | Mon 26 Oct |
| CVE-2025-34233 | 8.5 high | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a protection mechanism failure vulnerability within the file_get_contents() function. When an administrator configures a printer’s hostname (or similar callback field), the value is passed unchecked to PHP’s file_get_contents()/cURL functions, which follow redirects and impose no allow‑list, scheme, or IP‑range restrictions. An admin‑level attacker can therefore point the hostname to a malicious web server that issues a 301 redirect to internal endpoints such as the AWS EC2 metadata service. The server follows the redirect, retrieves the metadata, and returns or stores the credentials, enabling the attacker to steal cloud IAM keys, enumerate internal services, and pivot further into the SaaS infrastructure. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2020-8177 | 7.8 high | 1.0% | haxx, debian, curl, debian_linux, m10-1_firmware | curl 7.20.0 through 7.70.0 is vulnerable to improper restriction of names for files and other resources that can lead too overwriting a local file when the -J flag is used. | 14 Oct |
| CVE-2019-5443 | 7.8 high | 1.0% | haxx, oracle, curl, enterprise_manager_ops_center, http_server | A non-privileged user or program can put code and a config file in a known non-privileged path (under C:/usr/local/) that will make curl <= 7.65.1 automatically run the code (as an openssl "engine") on invocation. If that curl is invoked by a privileged user it can do anything it wants. | 14 Oct |
| CVE-2025-9086 | 7.5 high | 1.0% | haxx, debian, curl, debian_linux | 1. A cookie is set using the `secure` keyword for `https://target` 2. curl is redirected to or otherwise made to speak with `http://target` (same hostname, but using clear text HTTP) using the same cookie set 3. The same cookie name is set - but with only a slash as path (`path="/"`). Since this site is not secure, the cookie *should* be ignored. 4. A bug in the path comparison logic makes curl read outside a heap buffer boundary The bug either causes a crash or it potentially makes the comparison come to the wrong conclusion and lets the clear-text site override the contents of the secure cookie, contrary to expectations and depending on the memory contents immediately following the single-byte allocation that holds the path. The presumed and correct behavior would be to plainly ignore the second set of the cookie since it was already set as secure on a secure host so overriding it on an insecure host should not be okay. | 19 Oct |
| CVE-2025-58173 | 7.4 high | 1.0% | freshrss | FreshRSS is a self-hosted RSS feed aggregator. In versions 1.23.0 through 1.27.0, using a path traversal inside the `language` user configuration parameter, it's possible to call `install.php` and perform various administrative actions as an unprivileged user. These actions include logging in as the admin, creating a new admin user, or set the database to an attacker-controlled MySQL server and abuse it to execute code in FreshRSS by setting malicious feed `curl_params` inside the `feed` table. Version 1.27.1 fixes the issue. | 14 Oct |
| CVE-2025-0665 | 7.0 high | 1.0% | haxx, netapp, curl, bootstrap_os, h300s_firmware | libcurl would wrongly close the same eventfd file descriptor twice when taking down a connection channel after having completed a threaded name resolve. | 15 Oct |
| CVE-2025-34229 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/installApp.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34230 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/log_off_single_sign_on.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34232 | 6.9 medium | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/lexmark/dellCheck.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. | 18 Oct |
| CVE-2025-34469 | 6.9 medium | 1.0% | cowrie | Cowrie versions prior to 2.9.0 contain a server-side request forgery (SSRF) vulnerability in the emulated shell implementation of wget and curl. In the default emulated shell configuration, these command emulations perform real outbound HTTP requests to attacker-supplied destinations. Because no outbound request rate limiting was enforced, unauthenticated remote attackers could repeatedly invoke these commands to generate unbounded HTTP traffic toward arbitrary third-party targets, allowing the Cowrie honeypot to be abused as a denial-of-service amplification node and masking the attacker’s true source address behind the honeypot’s IP. | 8 Oct |
| CVE-2023-23915 | 6.5 medium | 1.0% | haxx, netapp, curl, active_iq_unified_manager, clustered_data_ontap | A cleartext transmission of sensitive information vulnerability exists in curl <v7.88.0 that could cause HSTS functionality to behave incorrectly when multiple URLs are requested in parallel. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. This HSTS mechanism would however surprisingly fail when multiple transfers are done in parallel as the HSTS cache file gets overwritten by the most recentlycompleted transfer. A later HTTP-only transfer to the earlier host name would then *not* get upgraded properly to HSTS. | Sat 24 Oct |
| CVE-2023-23599 | 6.5 medium | 1.0% | mozilla, firefox, firefox_esr, thunderbird | When copying a network request from the developer tools panel as a curl command the output was not being properly sanitized and could allow arbitrary commands to be hidden within. This vulnerability affects Firefox < 109, Firefox ESR < 102.7, and Thunderbird < 102.7. | Sat 24 Oct |
| CVE-2024-8096 | 6.5 medium | 1.0% | haxx, debian, curl, debian_linux, active_iq_unified_manager | When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate. | 15 Oct |
| CVE-2024-2466 | 6.5 medium | 1.0% | haxx, apple, curl, macos, h700s_firmware | libcurl did not check the server certificate of TLS connections done to a host specified as an IP address, when built to use mbedTLS. libcurl would wrongly avoid using the set hostname function when the specified hostname was given as an IP address, therefore completely skipping the certificate check. This affects all uses of TLS protocols (HTTPS, FTPS, IMAPS, POPS3, SMTPS, etc). | 15 Oct |
| CVE-2026-44170 | 6.3 medium | 1.0% | mariadb | MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, MariaDB on WIndows with installed CONNECT engine and enabled REST support interpolated table HTTP attribute into the curl command line without proper sanitizing. This allows the user to execute shell commands on the server. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. | Mon 26 Oct |
| CVE-2026-49345 | 5.3 medium | 1.0% | no CPE yet | Mercator is an open source web application that enables mapping of the information system. Prior to version 2025.05.19, a Server-Side Request Forgery (SSRF) vulnerability exists in Mercator's CVE configuration panel (`/admin/config/parameters`). The `testProvider()` method in `ConfigurationController` passes user-supplied input directly to `curl_init()` without validating the scheme, hostname, or destination IP address. An authenticated user with the `configure` permission can force the Mercator server to issue arbitrary outbound network requests. The suffix `/api/dbInfo` appended to the URL can be bypassed by injecting a `#` fragment character (e.g. `http://TARGET/PATH#`), allowing full control over the target URL. No scheme whitelist, host whitelist, or private/loopback IP block is applied. The `telnet://` scheme can be used for internal port scanning; the `gopher://` scheme enables interaction with unauthenticated internal services (Redis, Memcached), potentially leading to Remote Code Execution under specific deployment conditions. Version 2025.05.19 patches the issue. | Sun 25 Oct |
| CVE-2025-10148 | 5.3 medium | 1.0% | haxx, curl | curl's WebSocket code did not update the 32-bit mask pattern for each new outgoing frame as the specification says. Instead it used a fixed mask that persisted and was used throughout the entire connection. A predictable mask pattern allows for a malicious server to induce traffic between the two communicating parties that could be interpreted by an involved proxy (configured or transparent) as genuine, real, HTTP traffic with content and thereby poison its cache. That cached poisoned content could then be served to all users of that proxy. | 19 Oct |
| CVE-2025-14819 | 5.3 medium | 1.0% | haxx, curl | When doing TLS related transfers with reused easy or multi handles and altering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentally reuse a CA store cached in memory for which the partial chain option was reversed. Contrary to the user's wishes and expectations. This could make libcurl find and accept a trust chain that it otherwise would not. | 14 Oct |
| CVE-2025-15079 | 5.3 medium | 1.0% | haxx, curl | When doing SSH-based transfers using either SCP or SFTP, and setting the known_hosts file, libcurl could still mistakenly accept connecting to hosts *not present* in the specified file if they were added as recognized in the libssh *global* known_hosts file. | 14 Oct |
| CVE-2022-30115 | 4.3 medium | 1.0% | haxx, netapp, curl, hci_bootstrap_os, clustered_data_ontap | Using its HSTS support, curl can be instructed to use HTTPS directly insteadof using an insecure clear-text HTTP step even when HTTP is provided in theURL. This mechanism could be bypassed if the host name in the given URL used atrailing dot while not using one when it built the HSTS cache. Or the otherway around - by having the trailing dot in the HSTS cache and *not* using thetrailing dot in the URL. | 14 Oct |
| CVE-2025-0167 | 3.4 low | 1.0% | haxx, netapp, curl, h700s_firmware, h615c_firmware | When asked to use a `.netrc` file for credentials **and** to follow HTTP redirects, curl could leak the password used for the first host to the followed-to host under certain circumstances. This flaw only manifests itself if the netrc file has a `default` entry that omits both login and password. A rare circumstance. | 15 Oct |
| CVE-2026-40089 | 9.9 critical | 0.00% | sonicverse, radio_audio_streaming_stack | Sonicverse is a Self-hosted Docker Compose stack for live radio streaming. The Sonicverse Radio Audio Streaming Stack dashboard contains a Server-Side Request Forgery (SSRF) vulnerability in its API client (apps/dashboard/lib/api.ts). Installations created using the provided install.sh script (including the one‑liner bash <(curl -fsSL https://sonicverse.short.gy/install-audiostack)) are affected. In these deployments, the dashboard accepts user-controlled URLs and passes them directly to a server-side HTTP client without sufficient validation. An authenticated operator can abuse this to make arbitrary HTTP requests from the dashboard backend to internal or external systems. This vulnerability is fixed with commit cb1ddbacafcb441549fe87d3eeabdb6a085325e4. | Mon 26 Oct |
| CVE-2025-56563 | 9.8 critical | — | no CPE yet | A Server-Side Request Forgery vulnerability exists in sat_proxy.php in Zenith Satellite Tracker 1.0. The script accepts an attacker-controlled address URL parameter and passes it to curl_setopt(CURLOPT_URL) without host or scheme validation. An unauthenticated remote attacker can leverage this to make arbitrary HTTP and HTTPS requests from the server to internal networks or cloud metadata services, potentially obtaining sensitive information or pivoting to further attacks. | 8 h ago |
| CVE-2026-62668 | 9.4 critical | 0.00% | no CPE yet | Grav API Plugin is a RESTful API for Grav CMS that provides full headless access to your site's content. Prior to 1.0.6, the Grav API plugin WebhookController.php accepts webhook URLs after only FILTER_VALIDATE_URL syntax validation, and WebhookDispatcher.php initializes cURL without CURLOPT_PROTOCOLS or CURLOPT_REDIR_PROTOCOLS restrictions. An account with api.webhooks.write can submit file, dict, gopher, private-network, or link-local targets, retrieve local files and delivery response bodies, and pivot requests to internal services or cloud metadata endpoints. This issue is fixed in version 1.0.6. | Mon 26 Oct |
| CVE-2026-47407 | 9.4 critical | 0.00% | no CPE yet | PraisonAI Platform is the platform layer for the PraisonAI multi-agent teams system. Prior to version 0.1.4, the Platform server exposes resources under `/api/v1/workspaces/{workspace_id}/...` and protects them with a `require_workspace_member(workspace_id)` FastAPI dependency. The dependency only checks that the caller is a member of the workspace_id in the URL prefix. The route handlers then look up the inner resource (`agent_id`, `issue_id`, `project_id`, `label_id`, `comment_id`, `dependency_id`) by primary key alone. The resource's own `workspace_id` is never compared to the URL's `workspace_id`. A user can therefore put their own workspace in the URL prefix and any other workspace's resource ID in the path. The auth check passes, since they really are a member of the prefix workspace. The service then returns the cross-tenant resource for read, update, or delete. There is a second bug in the member-management routes (`add_member`, `update_member_role`, `remove_member`, `update_workspace`, `delete_workspace`). Each one inherits the default `min_role="member"` from `require_workspace_member`. Any basic member can therefore promote themselves to admin or owner, demote or remove other members, and delete the workspace. The role hierarchy exists in the schema but is not enforced. Registration is open at `/api/v1/auth/register` with no email verification. The default server bind is `0.0.0.0:8000` (`python -m praisonai_platform`). One curl from any unauthenticated network position is enough to bootstrap into the system. PraisonAI Platform version 0.1.4 patches the issue. | Sat 24 Oct |
| CVE-2026-41064 | 9.3 critical | 0.00% | wwbn, avideo | WWBN AVideo is an open source video platform. In versions up to and including 29.0, an incomplete fix for AVideo's `test.php` adds `escapeshellarg` for wget but leaves the `file_get_contents` and `curl` code paths unsanitized, and the URL validation regex `/^http/` accepts strings like `httpevil[.]com`. Commit 78bccae74634ead68aa6528d631c9ec4fd7aa536 contains an updated fix. | Mon 26 Oct |
| CVE-2026-48814 | 9.1 critical | 0.00% | no CPE yet | Network-AI is a TypeScript/Node.js multi-agent orchestrator. In versions 5.7.1 and earlier, the MCP SSE server allows unauthenticated cross-origin MCP tool invocation due to an empty default secret. This issue was partially addressed by CVE-2026-46701 in version 5.4.5 by closing the CORS flaw (with Access-Control-Allow-Origin now set only for localhost origins), but the empty-default-secret flaw described in the title remained: the SSE MCP server still defaulted to an empty secret, _isAuthorized() still returned true when the secret was empty, and a non-loopback bind only produced a warning. As a result, the server still ran fully unauthenticated by default. Any non-browser caller (for example, curl, SSRF, or a 0.0.0.0 bind) could invoke all 22 MCP tools (config_set, agent_spawn, blackboard_write, token_*) with no credentials. This issue was fixed in version 5.7.2. | Sun 25 Oct |
| CVE-2026-39453 | 8.5 high | 0.00% | no CPE yet | Navigating to a certain URL on the switch’s web server causes the switch to reboot. This can be automated using a tool like curl to create DoS conditions where the switch constantly reboots. | 11 Oct |
| CVE-2026-62234 | 8.4 high | 0.00% | no CPE yet | Grav before 2.0.4 fails to restrict cURL protocols in webhook dispatch, allowing authenticated users with api.webhooks.write permission to create webhooks with file://, dict://, or gopher:// URLs. Attackers can trigger webhook events to read local files, access process information, or pivot to internal services via unrestricted protocol handlers. | Sat 24 Oct |
| CVE-2026-34428 | 8.3 high | 0.00% | no CPE yet | Vvveb prior to 1.0.8.1 contains a server-side request forgery vulnerability in the oEmbedProxy action of the editor/editor module where the url parameter is passed directly to getUrl() via curl without scheme or destination validation. Authenticated backend users can supply file:// URLs to read arbitrary files readable by the web server process or http:// URLs targeting internal network addresses to probe internal services, with response bodies returned directly to the caller. | Mon 26 Oct |
| CVE-2025-11713 | 8.1 high | 0.00% | mozilla, firefox, thunderbird | Insufficient escaping in the “Copy as cURL” feature could have been used to trick a user into executing unexpected code on Windows. This did not affect the application when running on other operating systems. This vulnerability was fixed in Firefox 144, Firefox ESR 140.4, Thunderbird 144, and Thunderbird 140.4. | Fri 23 Oct |
| CVE-2026-41688 | 7.7 high | 0.00% | no CPE yet | Wallos is an open-source, self-hostable personal subscription tracker. In versions 4.8.4 and prior, the incomplete SSRF fix in Wallos validates webhook URLs via gethostbyname() but passes the original hostname to cURL without CURLOPT_RESOLVE pinning on 10 of 11 outbound HTTP endpoints, leaving a DNS rebinding TOCTOU window. At time of publication, there are no publicly available patches. | Mon 26 Oct |
| CVE-2026-110102 | 7.7 high | 0.00% | no CPE yet | Powerlevel10k through 1.20.0 contains an insecure download vulnerability in the gitstatus/install script that disables TLS certificate verification with curl -k and skips integrity checks when no SHA-256 utility exists. Network-positioned attackers can intercept the github.com mirror request and substitute a malicious archive, which runs as the gitstatusd daemon under the user's account on every prompt. | 14 Oct |
| CVE-2026-107362 | 7.1 high | 0.00% | no CPE yet | Malcolm file-upload component ships the upstream FilePond PHP server (pqina/filepond-server-php) largely unmodified: Dockerfile copies all upstream *.php files and Malcolm only overwrites config.php and submit.php. Upstream index.php exposes a fetch API route that instructs the server to download an arbitrary URL with curl (including FOLLOWLOCATION) and, for HEAD requests, stores the fetched response body in the upload container's transfer directory and returns the transfer ID to the caller, enabling full readback of the fetched content. | 8 Oct |
| CVE-2026-67339 | 6.9 medium | 0.00% | no CPE yet | guzzlehttp/guzzle versions before 7.14.2 fail to properly isolate Proxy-Authorization headers from origin servers in cURL handlers. Attackers can capture proxy credentials through origin server access logs when requests are redirected, bypassed, or sent through SOCKS proxies that Guzzle misclassifies as direct connections. | 8 Oct |
| CVE-2025-50234 | 6.5 medium | 0.00% | chshcms, mccms | MCCMS v2.7.0 has an SSRF vulnerability located in the index() method of the sys\apps\controllers\api\Gf.php file, where the pic parameter is processed. The pic parameter is decrypted using the sys_auth($pic, 1) function, which utilizes a hard-coded key Mc_Encryption_Key (bD2voYwPpNuJ7B8), defined in the db.php file. The decrypted URL is passed to the geturl() method, which uses cURL to make a request to the URL without proper security checks. An attacker can craft a malicious encrypted pic parameter, which, when decrypted, points to internal addresses or local file paths (such as http://127.0.0.1 or file://). By using the file:// protocol, the attacker can access arbitrary files on the local file system (e.g., file:///etc/passwd, file:///C:/Windows/System32/drivers/etc/hosts), allowing them to read sensitive configuration files, log files, and more, leading to information leakage or system exposure. The danger of this SSRF vulnerability includes accessing internal services and local file systems through protocols like http://, ftp://, and file://, which can result in sensitive data leakage, remote code execution, privilege escalation, or full system compromise, severely affecting the system's security and stability. | 19 Oct |
| CVE-2025-10548 | 6.5 medium | 0.00% | no CPE yet | The CleverControl employee monitoring software (v11.5.1041.6) fails to validate TLS server certificates during the installation process. The installer downloads and executes external components using curl.exe --insecure, enabling a man-in-the-middle attacker to deliver malicious files that are executed with SYSTEM privileges. This can lead to full remote code execution with administrative rights. No patch is available as the vendor has been unresponsive. It is assumed that previous versions are also affected, but this is not confirmed. | 11 Oct |
| CVE-2026-112103 | 6.3 medium | 0.00% | no CPE yet | A vulnerability has been found in f3-factory fatfree-core up to 3.9.2. This vulnerability affects the function _curl of the file web.php of the component HTTP Client. Such manipulation leads to improper certificate validation. The attack may be performed from remote. Attacks of this nature are highly complex. It is stated that the exploitability is difficult. Upgrading to version 3.9.3 is able to resolve this issue. The name of the patch is a2c755c8dc9ad0eb7d5fd261b09aff90f649433c. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | 19 Oct |
Download these 118 as CSV · subscribe to this list.
EPSS scores: 2026-10-27. NVD cursor: 2026-10-28 21:20. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.