Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-74591 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom of the loop, so the retry does a full re-evaluation after reacquiring the lock, and cannot reach xas_store() with the wrong index. Production was suffering from rare SIGILLs and SIGSEGVs, executable text found a page away from where it belonged, !folio_contains() bug hit when debug enabled: symptoms not seen since this patch went in. | 14 Oct |
| CVE-2026-78003 | 9.8 critical | 1.0% | no CPE yet | The Mailgun for WordPress plugin for WordPress is vulnerable to Server-Side Request Forgery (SSRF) via path traversal in versions up to and including 2.2.0. This is due to insufficient input validation in the add_list() function, which accepts user-controlled array keys from $_POST['addresses'], passes them through sanitize_text_field(). This makes it possible for unauthenticated attackers to make authenticated POST requests to any Mailgun API endpoint using the WordPress site's API key, including creating inbound email-forwarding routes that can intercept password reset emails, leading to administrator account takeover. | 12 Oct |
| CVE-2026-65605 | 9.4 critical | 1.0% | no CPE yet | SiYuan before v3.7.2 contains a stored cross-site scripting vulnerability in Attribute View (database) cell rendering. A Template column value is rendered as HTML via text/template without auto-escaping, and EscapeHTML is only applied when HasUnclosedHtmlTag returns true; because balanced self-closing tags such as <img> are skipped by that check, a payload like <img src=x onerror=...> is stored unescaped and later inserted into the page via innerHTML, executing when the database is viewed. Because the desktop renderer runs with nodeIntegration enabled, the injected script can reach require and escalate to arbitrary command execution. | Sat 24 Oct |
| CVE-2026-57580 | 9.4 critical | 1.0% | no CPE yet | authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, an inbound SAML Source configured with the non-default USERNAME_LINK or EMAIL_LINK user-matching mode interprets an XML comment in a NameID differently from the identity provider's signed assertion. An attacker with an account on the source identity provider who can set the account's NameID can inject an XML comment that truncates the value used by authentik to the text before the comment while the signed assertion remains valid. A crafted NameID can therefore truncate to a victim's username or email and bind the attacker's external identity to the victim's existing account. This grants full takeover without the victim's password or the identity provider's private key, and the malicious link persists so later logins succeed without the comment. Sources using the default unique-identifier matching mode and authentik's outbound SAML Provider role are not affected. This issue is fixed in versions 2026.2.6 and 2026.5.5. | 22 Oct |
| CVE-2026-34108 | 9.3 critical | 1.0% | no CPE yet | Guardian language-system passes the id GET parameter directly into a PHP exec() call in text.php (line 15) without sanitization: exec(\"php jobs/text.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to execute arbitrary OS commands on the server. | Sun 25 Oct |
| CVE-2026-34111 | 9.3 critical | 1.0% | no CPE yet | Guardian language-system passes the id GET parameter directly into a PHP exec() call in speechmac_text.php (line 18) without sanitization: exec(\"php jobs/speech_audio_mac_text.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to execute arbitrary OS commands on the server. | Sun 25 Oct |
| CVE-2026-34113 | 9.3 critical | 1.0% | no CPE yet | Guardian language-system passes the id GET parameter directly into a PHP exec() call in speech_text.php (line 18) without sanitization: exec(\"php jobs/speech_audio_text.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to execute arbitrary OS commands on the server. | Sun 25 Oct |
| CVE-2026-34114 | 9.3 critical | 1.0% | no CPE yet | Guardian language-system passes the id GET parameter directly into a PHP exec() call in translate_text.php (line 18) without sanitization: exec(\"php jobs/translate_text.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to execute arbitrary OS commands on the server. | Sun 25 Oct |
| CVE-2026-34117 | 9.3 critical | 1.0% | no CPE yet | Guardian language-system passes the id GET parameter directly into a PHP exec() call in text_to_subtitles.php (line 19) without sanitization: exec(\"php jobs/text_to_subtitles.php \".$login_session.\" \".$_GET['id'].\" ...\"). No authentication is required. An unauthenticated remote attacker can append shell metacharacters to execute arbitrary OS commands on the server. | Sun 25 Oct |
| CVE-2026-59866 | 9.3 critical | 1.0% | no CPE yet | Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.5, Kiota emitted x-ms-kiota-info clientClassName and clientNamespaceName values without identifier or path sanitization as both generated client class or namespace names and generated output path components when `kiota generate` ran without -c/--class-name, allowing an attacker-controlled or compromised OpenAPI description to write generated source outside the -o output directory and inject arbitrary text into generated class or namespace declarations. This issue is fixed in version 1.29.1 and 1.32.5 by GenerationConfiguration.SanitizeClientClassName and SanitizeClientNamespaceName. | Sat 24 Oct |
| CVE-2025-34199 | 9.3 critical | 1.0% | vasion, virtual_appliance_application, virtual_appliance_host | Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.1049 and Application versions prior to 20.0.2786 (VA and SaaS deployments) contain insecure defaults and code patterns that disable TLS/SSL certificate verification for communications to printers and internal microservices. In multiple places, the application sets libcurl/PHP transport options such that CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER are effectively disabled, and environment variables (for example API_*_VERIFYSSL=false) are used to turn off verification for gateway and microservice endpoints. As a result, the client accepts TLS connections without validating server certificates (and, in some cases, uses clear-text HTTP), permitting on-path attackers to perform man-in-the-middle (MitM) attacks. An attacker able to intercept network traffic between the product and printers or microservices can eavesdrop on and modify sensitive data (including print jobs, configuration, and authentication tokens), inject malicious payloads, or disrupt service. This vulnerability has been identified by the vendor as: V-2024-024 — Insecure Communication to Printers & Microservices. | 18 Oct |
| CVE-2026-108892 | 9.3 critical | 1.0% | no CPE yet | A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter of the component Mac Filter. This manipulation of the argument newap_text_%d causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | 15 Oct |
| CVE-2026-8445 | 9.3 critical | 1.0% | no CPE yet | justhtml versions <= 1.11.0 (fixed in 1.12.0) do not sufficiently escape HTML-significant characters (angle brackets) in text nodes when converting a parsed document to Markdown via to_markdown(). While a small set of Markdown metacharacters are escaped, characters such as < and > are preserved, so untrusted input that is safe in to_html() — including entity-decoded text (e.g. <script>) or text from RCDATA/RAWTEXT-parsed elements like <title>, <textarea>, <noscript>, and <plaintext> — can be emitted as raw HTML in the Markdown output, enabling a sanitizer bypass and potential cross-site scripting when that output is rendered. | 12 Oct |
| CVE-2026-6257 | 9.2 critical | 1.0% | no CPE yet | Vvveb CMS v1.0.8.2 contains a remote code execution vulnerability in its media management functionality where a missing return statement in the file rename handler allows authenticated attackers to rename files to blocked extensions .php or .htaccess. Attackers can exploit this logic flaw by first uploading a text file and renaming it to .htaccess to inject Apache directives that register PHP-executable MIME types, then uploading another file and renaming it to .php to execute arbitrary operating system commands as the www-data user. | Mon 26 Oct |
| CVE-2026-112005 | 9.2 critical | 1.0% | no CPE yet | WhoDB 0.104.0 before 0.135.0 contains a path traversal vulnerability that allows remote attackers to read and write arbitrary host files by running DuckDB filesystem functions through the query editor. Attackers can log in to a DuckDB file without credentials and use read_text, read_blob, COPY ... TO or ATTACH to steal session.key and stored database credentials or overwrite files. | 22 Oct |
| CVE-2026-90413 | 9.1 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build. | 19 Oct |
| CVE-2026-92097 | 9.1 critical | 1.0% | no CPE yet | The Click to Chat for WhatsApp plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in versions up to, and including, 4.44 This is due to the greetings_dialog() function building the {url} template placeholder from a sanitize_text_field()-filtered $_SERVER['REQUEST_URI'] on archive pages and then passing the substituted greeting content to do_shortcode() in the greetings-1 and greetings-2 templates, without stripping shortcode delimiters. Because wp_kses() runs against main_content BEFORE the {url} substitution, the attacker-controlled URL bytes reach do_shortcode() unfiltered. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes registered by WordPress core, the active theme, or any other plugin (e. | 15 Oct |
| CVE-2023-23914 | 9.1 critical | 1.0% | haxx, netapp, curl, active_iq_unified_manager, clustered_data_ontap | A cleartext transmission of sensitive information vulnerability exists in curl <v7.88.0 that could cause HSTS functionality fail when multiple URLs are requested serially. Using its HSTS support, curl can be instructed to use HTTPS instead of usingan insecure clear-text HTTP step even when HTTP is provided in the URL. ThisHSTS mechanism would however surprisingly be ignored by subsequent transferswhen done on the same command line because the state would not be properlycarried on. | 14 Oct |
| CVE-2026-102225 | 8.8 high | 1.0% | microsoft, windows_10_1607, windows_10_1809, windows_10_21h2 | Out-of-bounds read in Windows Text Shaping allows an unauthorized attacker to execute code over a network. | Mon 26 Oct |
| CVE-2026-55773 | 8.8 high | 1.0% | no CPE yet | CedarJava is an open source Java implementation of the Cedar policy language, used for fine-grained authorization decisions. In versions prior to 2.3.6, 3.4.1 and 4.9.0, under certain circumstances, improper input handling could allow Cedar-expression injection via unescaped toCedarExpr(). The toCedarExpr() method on Cedar Value types does not escape special characters (" or \) when converting values to Cedar source code. If an integrator uses toCedarExpr() to build policy text at runtime from user-controlled values, an actor could inject arbitrary Cedar expressions. For example, injecting || true into a permit ... when { ... } clause could make the permit unconditional, or injecting && false into a forbid clause could prevent the forbid from triggering. This issue requires the integrator to use toCedarExpr() to build policy text at runtime from user-controlled input. This vulnerability has been fixed in versions 2.3.6, 3.4.1, and 4.9.0. | Sat 24 Oct |
| CVE-2026-12894 | 8.8 high | 1.0% | no CPE yet | A flaw was found in the Qute template engine, which is used by Quarkus to generate dynamic content like HTML pages or emails. The issue exists in the component responsible for looking up data values (ReflectionValueResolver), which fails to properly block access to sensitive Java internal functions when processing certain data types like Enums. An attacker who can provide or influence the template text can exploit this bypass to take control of the server by executing unauthorized commands. | 20 Oct |
| CVE-2024-35955 | 8.8 high | 1.0% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE. | 15 Oct |
| CVE-2025-66434 | 8.8 high | 1.0% | frappe, erpnext | An SSTI (Server-Side Template Injection) vulnerability exists in the get_dunning_letter_text method of Frappe ERPNext through 15.89.0. The function renders attacker-controlled Jinja2 templates (body_text) using frappe.render_template() with a user-supplied context (doc). Although Frappe uses a custom SandboxedEnvironment, several dangerous globals such as frappe.db.sql are still available in the execution context via get_safe_globals(). An authenticated attacker with access to configure Dunning Type and its child table Dunning Letter Text can inject arbitrary Jinja expressions, resulting in server-side code execution within a restricted but still unsafe context. This can leak database information. | 14 Oct |
| CVE-2026-105796 | 8.8 high | 1.0% | no CPE yet | Kiota is an OpenAPI based HTTP Client code generator. From 0.5.0 until 1.35.0, Kiota's Java and PHP documentation-comment sanitizers delete block-comment terminators rather than neutralizing them, allowing overlapping characters to reform a terminator and place attacker-controlled OpenAPI text outside a generated documentation comment. The Java sanitizer also removes non-ASCII characters after deleting terminators, which can create a new terminator during normalization. Exploitation requires a developer or build pipeline to generate source from the malicious description and then compile and load the Java output or load the PHP output, after which injected code executes in the consuming application or build environment context. The version range is based on the Java defect and does not assert that PHP generation existed in every affected release. This issue is fixed in version 1.35.0. | 9 Oct |
| CVE-2026-104714 | 8.8 high | 1.0% | apache, struts | Concurrent execution using shared resource with improper synchronization ('race condition') vulnerability in Apache Struts. Where a localized message formats a date or time argument, the formatter retained for that message by the application-wide text provider is used by concurrently served requests without isolation, so a value belonging to one user can appear in another user's response, or the rendering can fail and surface as a server error. Applications whose localized messages format no date or time arguments are not affected. This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0. Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue. | 8 Oct |
| CVE-2026-7551 | 8.7 high | 1.0% | hkuds, openharness | HKUDS OpenHarness contains a remote code execution vulnerability in the /bridge slash command that allows remote senders accepted by configuration to execute arbitrary operating system commands. Attackers can invoke the /bridge spawn command with attacker-controlled command text that is forwarded to the bridge session manager and executed through the shared shell subprocess helper, allowing them to spawn shell sessions as the OpenHarness process user and access local files, credentials, workspace state, and repository contents. | Mon 26 Oct |
| CVE-2026-72818 | 8.7 high | 1.0% | no CPE yet | The URLS regular expression in nltk/tokenize/casual.py, compiled into TweetTokenizer.WORD_RE and applied by TweetTokenizer.tokenize, contains a naked-domain branch whose domain-label prefix [a-z0-9]+(?:[.\-][a-z0-9]+)* is unbounded. Input consisting of many alternating label separators can be partitioned in exponentially many ways, and because the branch also requires a trailing top-level domain that such input never supplies, the engine explores those partitions before failing at each offset. A few kilobytes of input therefore consumes seconds to minutes of single-threaded CPU, and the HANG_RE substitution performed before matching does not collapse the pattern. TweetTokenizer is intended for tokenizing untrusted social-media text, so any service that applies it, or the module-level casual_tokenize, to submitted text can be stalled per request without authentication. Version 3.10.1 bounds the label repetition. | Mon 26 Oct |
| CVE-2026-49851 | 8.7 high | 1.0% | no CPE yet | Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0. | Sun 25 Oct |
| CVE-2026-59935 | 8.7 high | 1.0% | pypdf_project, pypdf | pypdf is a free and open-source pure-python PDF library. Prior to 6.14.2, an attacker can craft a PDF with a page content stream containing a not terminated inline image that uses the ASCII85 or ASCIIHex filters, causing an infinite loop during parsing such as when extracting page text. This issue is fixed in version 6.14.2. | Sun 25 Oct |
| CVE-2026-59936 | 8.7 high | 1.0% | pypdf_project, pypdf | pypdf is a free and open-source pure-python PDF library. Prior to 6.14.1, an attacker can craft a PDF with a page content stream containing a not terminated inline image, causing an infinite loop during inline image end marker detection such as when extracting page text. This issue is fixed in version 6.14.1. | Sun 25 Oct |
| CVE-2026-58655 | 8.7 high | 1.0% | no CPE yet | The bundled Grav Flex Objects plugin (getgrav/grav-plugin-flex-objects) before 1.4.0 contains a stored server-side template injection vulnerability. When rendering dynamic collection or object titles, the plugin passes user-controlled frontmatter values (page.header.flex.collection.title or page.header.flex.object.title) to Twig's template_from_string(), causing them to be evaluated as Twig code rather than treated as text. This path bypasses Grav's Security::cleanDangerousTwig() sanitization. An attacker who can control the title frontmatter of a publicly reachable Flex Objects page can achieve arbitrary Twig execution and escalate to remote command execution via access to internal Grav services such as the scheduler. | Sat 24 Oct |
| CVE-2026-59860 | 8.7 high | 1.0% | no CPE yet | Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.32.3, Kiota is affected by a code-generation injection vulnerability in the C# XML documentation-comment sink (the description, externalDocs label, and externalDocs link fields emitted as /// … comments). When text from an OpenAPI description is written into single-line XML doc comments without stripping newline and Unicode line-terminator characters, an attacker can break out of the /// comment line and inject additional code into generated C# clients. This issue is fixed in version 1.29.1 and 1.32.3. | Sat 24 Oct |
| CVE-2026-70619 | 8.7 high | 1.0% | no CPE yet | Odysseus before commit bf325f6 contains a missing authorization vulnerability that allows authenticated non-admin users to manage server-wide embedding backend configuration by invoking endpoint management routes that verify session authentication but omit the admin authorization guard. Attackers can supply an attacker-controlled URL to overwrite the embedding backend persisted in the endpoint configuration file and process environment, causing all subsequent embedding operations including chat messages, RAG queries, memory entries, and vault text to be transmitted in plaintext to the attacker-controlled destination, or delete the endpoint configuration to deny embedding service to all users. | Sat 24 Oct |
| CVE-2026-54078 | 8.7 high | 1.0% | no CPE yet | veraPDF validation model is an implementation of the veraPDF validation model. From 1.25.73 until 1.30.2 and 1.31.71, veraPDF-validation contains an XML External Entity (XXE) vulnerability in validation-model/src/main/java/org/verapdf/gf/model/tools/DictionaryKeysHelper.java in getRichTextStringOrStreamEntryStringRepresentation(), where a crafted PDF containing a malicious rich-text /RC or /RV entry can cause external entity expansion and reflect local file contents into the validation report. This issue is fixed in versions 1.30.2 and 1.31.71. | Fri 23 Oct |
| CVE-2026-77926 | 8.7 high | 1.0% | no CPE yet | Aix-DB 1.2.4 contains a remote code execution vulnerability that allows authenticated non-admin users to run operating system commands through the ChatBI common agent's ungated deepagents execute tool. Attackers can send crafted chat input to POST /dify/get_answer or upload documents with malicious text to run host commands, exposing datasource credentials and model API keys. | 20 Oct |
| CVE-2026-42093 | 8.7 high | 1.0% | no CPE yet | Redash is a package for data visualization and sharing. From versions after 8.0.0 until 26.9.0, the Query Results query runner in redash/query_runner/query_results.py accepts param_query_N_{key=value} parameters and passed attacker-controlled values to replace_query_parameters() for raw substitution into a referenced query's SQL. This path bypassed the ParameterizedQuery schema validation used by normal query execution and omitted the is_safe permission check. An authenticated user with at least view-only access to both the Query Results data source and the referenced data source could therefore inject SQL through text parameters and execute it with the referenced data source's privileges. This issue is fixed in version 26.9.0. | 16 Oct |
| CVE-2026-4671 | 8.7 high | 1.0% | no CPE yet | justhtml before 1.18.0 contains multiple low-severity denial-of-service issues in CSS selector handling and linkification. Applications that evaluate attacker-controlled selector strings (via query(), matches(), or selector-based transforms), run selector matching over very large untrusted documents, construct DOM trees from untrusted structure, or enable linkification over attacker-controlled text may consume disproportionate CPU or memory. Triggers include oversized selectors, large selector lists, oversized compound selectors, long combinator chains, deeply nested functional pseudo-classes, repeated token/positional matching, cyclic DOM graphs causing non-terminating traversal, and punctuation-heavy or trailing-bracket linkification input. These are availability-only concerns and do not by themselves allow script execution, data disclosure, or sanitizer bypass. Default JustHTML(sanitize=True) usage is not expected to be exposed, since selectors are normally supplied by application code. | 12 Oct |
| CVE-2026-86434 | 8.7 high | 1.0% | no CPE yet | league/commonmark versions >= 2.0.0 and < 2.8.4 (patched in 2.9.0) contain a denial of service vulnerability in UniqueSlugNormalizer::normalize(), which restarts its numeric-suffix search from 1 on every slug collision, resulting in O(K^2) time complexity for K headings that collapse to the same base slug. The vulnerable path is reached when HeadingPermalinkExtension, FootnoteExtension, or TableOfContentsExtension is registered. An unauthenticated attacker can force many headings onto a single base slug (e.g., via empty ATX headings, identical heading text, or punctuation-only headings) in a small Markdown document, consuming excessive CPU and denying service. | 8 Oct |
| CVE-2026-86429 | 8.7 high | 1.0% | thephpleague, commonmark | The league/commonmark (thephpleague/commonmark) library in versions >= 1.5.0 and < 2.9.1 contains quadratic parsing complexity in its SmartPunctExtension and AttributesExtension. When either extension is explicitly registered on the Environment (they are not enabled by default and are excluded from the standard CommonMark and GitHub-Flavored Markdown converters), an unauthenticated attacker can submit small, specially crafted Markdown documents — such as text alternating with unpaired quotes, contiguous runs of block-level attribute blocks, or repeated class attributes — to trigger disproportionate CPU consumption and cause a denial of service. Fixed in 2.9.1. | 8 Oct |
| CVE-2026-11407 | 8.6 high | 1.0% | no CPE yet | Pimcore CMS/DXP version 12.3.8 contains a sandbox bypass vulnerability that allows authenticated administrative attackers to execute arbitrary methods on PHP objects by exploiting empty checkMethodAllowed() and checkPropertyAllowed() implementations in the custom Twig SecurityPolicy. Attackers can supply malicious Twig templates through the DataObject ClassDefinition Layout\Text component to perform arbitrary file reads, execute arbitrary database queries, and potentially achieve remote code execution via PHP object gadget chains, with the pimcore_* function wildcard further broadening the bypass to all Pimcore Twig functions. | Mon 26 Oct |
| CVE-2026-107588 | 8.4 high | 1.0% | no CPE yet | Vaadin Charts renders charts with the Highcharts library and pins an exact version of it, 9.2.2 in Vaadin 22 to 24 and 12.2.0 in Vaadin 25, so an application cannot remove these vulnerabilities by upgrading Highcharts on its own. Highsoft disclosed several vulnerabilities in that library that are reachable through the chart configuration: writes to Object.prototype through dotted series.keys paths, and cross-site scripting through credits.href, through breadcrumbs.style, through HTML text parsing while printing, and through xlink:href attributes in exported charts. An application is affected where data an attacker controls reaches the chart configuration, for example through additionalOptions, through updateConfiguration(), or through text options that accept markup. The fixed Vaadin versions apply Highsoft's recommended workarounds to the bundled Highcharts when it loads, and keep the same Highcharts version. Users of affected versions should apply the following mitigation or upgrade. Releases that have fixed this issue include: Product version Vaadin 22.0.0 - 23.6.15 Vaadin 24.0.0 - 24.4.23 Vaadin 24.5.0 - 24.7.15 Vaadin 24.8.0 - 24.9.22 Vaadin 24.10.0 - 24.10.10 Vaadin 25.0.0 - 25.2.9 Vaadin 25.3.0 Mitigation Upgrade to 23.6.16 Upgrade to 24.4.24 Upgrade to 24.7.16 Upgrade to 24.9.23 Upgrade to 24.10.11 Upgrade to 25.2.10 Upgrade to 25.3.1 or newer Please note that Vaadin versions 10-13 and 15-22 are no longer supported and you should update either to the latest 23, 24, 25 version. Artifacts Maven coordinates / Vulnerable versions / Fixed version com.vaadin:vaadin / 22.0.0 - 23.6.15 / >=23.6.16 com.vaadin:vaadin / 24.0.0 - 24.4.23 / >=24.4.24 com.vaadin:vaadin / 24.5.0 - 24.7.15 / >=24.7.16 com.vaadin:vaadin / 24.8.0 - 24.9.22 / >=24.9.23 com.vaadin:vaadin / 24.10.0 - 24.10.10 / >=24.10.11 com.vaadin:vaadin / 25.0.0 - 25.0.13 / >=25.2.10 com.vaadin:vaadin / 25.1.0 - 25.1.13 / >=25.2.10 com.vaadin:vaadin / 25.2.0 - 25.2.9 / >=25.2.10 com.vaadin:vaadin / 25.3.0 / >=25.3.1 com.vaadin:vaadin-charts-flow / 22.0.0 - 23.6.15 / >=23.6.16 com.vaadin:vaadin-charts-flow / 24.0.0 - 24.4.22 / >=24.4.24 com.vaadin:vaadin-charts-flow / 24.5.0 - 24.7.14 / >=24.7.15 com.vaadin:vaadin-charts-flow / 24.8.0 - 24.9.22 / >=24.9.23 com.vaadin:vaadin-charts-flow / 24.10.0 - 24.10.10 / >=24.10.11 com.vaadin:vaadin-charts-flow / 25.0.0 - 25.0.13 / >=25.2.10 com.vaadin:vaadin-charts-flow / 25.1.0 - 25.1.13 / >=25.2.10 com.vaadin:vaadin-charts-flow / 25.2.0 - 25.2.9 / >=25.2.10 com.vaadin:vaadin-charts-flow / 25.3.0 / >=25.3.1 com.vaadin:vaadin-charts-flow-svg-generator / 21.0.0 - 23.6.15 / >=23.6.16 com.vaadin:vaadin-charts-flow-svg-generator / 24.0.0 - 24.4.22 / >=24.4.24 com.vaadin:vaadin-charts-flow-svg-generator / 24.5.0 - 24.7.14 / >=24.7.15 com.vaadin:vaadin-charts-flow-svg-generator / 24.8.0 - 24.9.22 / >=24.9.23 com.vaadin:vaadin-charts-flow-svg-generator / 24.10.0 - 24.10.10 / >=24.10.11 com.vaadin:vaadin-charts-flow-svg-generator / 25.0.0 - 25.0.13 / >=25.2.10 com.vaadin:vaadin-charts-flow-svg-generator / 25.1.0 - 25.1.13 / >=25.2.10 com.vaadin:vaadin-charts-flow-svg-generator / 25.2.0 - 25.2.9 / >=25.2.10 com.vaadin:vaadin-charts-flow-svg-generator / 25.3.0 / >=25.3.1 npm packages npm package / Vulnerable versions / Fixed version @vaadin/charts / 22.0.0 - 23.6.6 / >=23.6.7 @vaadin/charts / 24.0.0 - 24.4.18 / >=24.4.19 @vaadin/charts / 24.5.0 - 24.7.12 / >=24.7.13 @vaadin/charts / 24.8.0 - 24.9.18 / >=24.9.19 @vaadin/charts / 24.10.0 - 24.10.6 / >=24.10.7 @vaadin/charts / 25.0.0 - 25.0.13 / >=25.2.14 @vaadin/charts / 25.1.0 - 25.1.14 / >=25.2.14 @vaadin/charts / 25.2.0 - 25.2.13 / >=25.2.14 @vaadin/charts / 25.3.0 / >=25.3.1 | 22 Oct |
| CVE-2026-59250 | 8.3 high | 1.0% | no CPE yet | Classic buffer overflow in the Erlang/OTP megaco flex scanner C driver allows a remote unauthenticated attacker to corrupt the driver's memory (and potentially achieve remote code execution or a denial-of-service crash) by sending a single text-encoded H.248/Megaco message containing an oversized property parm name. When tokenizing a Local/Remote descriptor, mfs_load_property_groups extracts the attacker-controlled property name (bounded only by the message length) and, when no value follows, formats it into a fixed 512-byte error_msg field of the MfsErlDrvData struct using an unchecked sprintf call. Names longer than roughly 452 bytes overflow into the immediately following struct fields (text_buf, text_ptr, term_spec, term_spec_size, term_spec_index), overwriting live pointers and counters with attacker-chosen bytes. Subsequent scanner code writes and frees through the corrupted pointers, producing arbitrary write and arbitrary free primitives inside the BEAM VM process, which can be leveraged for remote code execution. On builds compiled with _FORTIFY_SOURCE the overflow is detected at runtime and terminates the process with SIGABRT, resulting in denial of service. The overflow occurs in the flex scanner before any grammar or Megaco-level authentication processing, so exploitation requires only network reachability to the megaco transport port on a node configured with {scanner, flex}. This vulnerability is associated with program files lib/megaco/src/flex/megaco_flex_scanner_drv.flex.src and program routines mfs_load_property_groups. This issue affects OTP from OTP 17.0 before OTP 27.3.4.15, from OTP 28.0 before OTP 28.5.0.4, and from OTP 29.0 before OTP 29.0.4, corresponding to megaco from 3.17.1 before 4.7.2.2, from 4.8 before 4.8.3.1, and from 4.9 before 4.9.1. Whether OTP before OTP 17.0, corresponding to megaco before 3.17.1, is affected is unknown. | Sat 24 Oct |
| CVE-2026-112893 | 8.2 high | 1.0% | python, pillow | Pillow is a Python imaging library. From 10.0.0 until 13.0.0, Pillow can free an invalid glyph pointer during FreeType rendering with an active stroker. If FT_Load_Glyph fails, cleanup may call FT_Done_Glyph on an uninitialized or stale glyph variable. An attacker can supply a malformed font as untrusted bytes to an application that draws text with a nonzero stroke width, forcing the glyph-load failure path. This can corrupt memory or crash the process. This issue is fixed in version 13.0.0. | Wed 28 Oct |
| CVE-2026-65842 | 8.2 high | 1.0% | no CPE yet | Plate is a rich-text editor with AI and shadcn/ui. Prior to 53.3.2, @platejs/docx-io fetches remote image URLs while converting attacker-controlled HTML through htmlToDocxBlob in a server-side or privileged environment. The converter can make requests to internal network resources and include the fetched image bytes in the generated DOCX, allowing server-side request forgery with response disclosure. Applications can also incur resource consumption from attacker-selected remote responses. This issue is fixed in version 53.3.2. | 18 Oct |
| CVE-2026-45062 | 8.1 high | 1.0% | no CPE yet | FrankenPHP is a modern application server for PHP. From version 1.11.2 to before version 1.12.3, the splitPos() function in cgi.go misuses golang.org/x/text/search with search.IgnoreCase when the request path contains a non-ASCII byte. Two distinct flaws in that fallback let an attacker mislead FrankenPHP into treating a non-.php file as a .php script. In any deployment where the attacker can place content into a file served by FrankenPHP (uploads, file storage, etc.), this can be escalated to remote code execution by crafting a URL whose path triggers either flaw. This issue has been patched in version 1.12.3. | Sun 25 Oct |
| CVE-2026-45135 | 8.1 high | 1.0% | caddyserver, caddy | Caddy is an extensible server platform that uses TLS by default. From 2.7.0 until 2.11.3, the FastCGI transport's splitPos() in modules/caddyhttp/reverseproxy/fastcgi/fastcgi.go misuses golang.org/x/text/search with search.IgnoreCase when the request path contains a non-ASCII byte. Two distinct flaws in that fallback let an attacker mislead Caddy's FastCGI splitting into treating a non-.php (or other configured split_path extension) file as a script. In any deployment where the attacker can place content into a file served via FastCGI (uploads, file storage, etc.), this can be escalated to remote code execution by crafting a URL whose path triggers either flaw. This vulnerability is fixed in 2.11.3. | Sun 25 Oct |
| CVE-2026-89709 | 8.1 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: lockd, nfsd: RCU-protect nlmsvc_ops dispatch nlmsvc_ops is published by nfsd_lockd_init() and cleared by nfsd_lockd_shutdown() with plain stores, while lockd dereferences it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's .text, so a stale load after rmmod nfsd results in either a NULL deref or a module-text use-after-free. Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module *owner field to nlmsvc_binding and pin the module across indirect calls with try_module_get/module_put. When the binding is torn down, fall back to fput() to avoid leaking struct file references. | 21 Oct |
| CVE-2026-104937 | 8.1 high | 1.0% | no CPE yet | Shopware version 6.7 allows the upload of attacker‑controlled HTML files and serves them as text/html without effective security headers, enabling stored cross-site scripting (XSS). When a malicious uploaded file containing an embedded JavaScript payload is viewed by an administrator, the attacker can access and exfiltrate the administrator's authentication token. The compromised token enables unauthorized access to the Shopware Administration API. If the affected administrator account possesses extension‑management privileges, an attacker can upload, install, and activate malicious plugins to achieve arbitrary PHP code execution on the underlying OS with the privileges of the Shopware process. | 20 Oct |
| CVE-2026-53580 | 8.1 high | 1.0% | triliumnotes, trilium | Trilium is an open-source hierarchical note-taking application. In versions prior to 0.104.0, the automatic image-download feature accepts file:// URLs in a note's img tags and reads the referenced local file with no path validation, allowing any authenticated user to disclose arbitrary files readable by the Trilium process. When a text note is saved, Trilium scans its HTML for image sources and downloads each external one; because the HTML sanitizer keeps file as an allowed scheme, a source such as file:///etc/passwd is passed straight to a filesystem read and its contents are stored as a note attachment the user can then retrieve. Pointing the same primitive at an unbounded source such as /dev/zero causes uncontrolled memory allocation that crashes the server process. The feature is enabled by default and is reachable through the web UI, the ETAPI, the web clipper, and note imports, requiring only an authenticated session or an ETAPI token. This issue is fixed in version 0.104.0 | 14 Oct |
| CVE-2026-67309 | 7.8 high | 1.0% | traefik | Traefik versions >= v3.7.0 and <= v3.7.7 contain a path traversal vulnerability in the Kubernetes Ingress NGINX provider's RewriteTarget middleware (generated from the nginx.ingress.kubernetes.io/rewrite-target annotation). When an Ingress path uses a regex that captures attacker-controlled text without requiring a path separator (e.g., path /api(.*) with rewrite target /$1), a crafted request such as /api../admin matches the public router, is rewritten to a dot-segment traversal path (/../admin), and is forwarded without post-replacement normalization validation. A backend that normalizes dot segments resolves the path to a protected endpoint (e.g., /admin) reachable only through a separate router secured with BasicAuth, DigestAuth, or ForwardAuth, resulting in route-level authentication bypass. The issue is fixed in v3.7.8. | 8 Oct |
Download these 726 as CSV · subscribe to this list.
EPSS scores: 2026-10-28. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.