Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-18673 | 5.3 medium | 0.00% | no CPE yet | When kuma-dp is configured with the Envoy admin API on a Unix domain socket, which is the default, its readiness service on TCP port 9902 - bound to all interfaces - forwards almost the entire Envoy admin API to any caller that can reach the port, with no authentication. An attacker with network access to a data plane's port 9902, for example another pod on the cluster network, can read Envoy and data plane configuration without credentials: config dumps, cluster and listener lists, stats, and the mesh trust bundle. Exposure is read-only - destructive Envoy admin actions are blocked and private keys are not exposed. | 23 Oct |
| CVE-2026-113799 | 5.3 medium | 0.00% | no CPE yet | Slack Morphism is a client library for Slack Web/Events API/Socket Mode and Block Kit. Versions 1.0.0 through 2.27.0 expose the correct Slack request HMAC when signature verification fails. For an invalid request, `slack-morphism` computes the correct signature for the attacker-controlled timestamp and request body and stores it in `SlackEventWrongSignatureError.generated_hash`. The error's `Debug` and `Display` representations expose that value, and the default Axum listener error handler logs it at error level. An attacker who can both reach the application's Slack callback endpoint and read its application/service logs can therefore use the verifier as a chosen-message HMAC oracle. The attacker can send an arbitrary request with an invalid signature, recover the correct signature from the resulting log entry, and resend the same request within the five-minute freshness window. The second request passes Slack Morphism's signature verification and reaches the protected application callback without the attacker knowing the Slack signing secret. Version 2.28.0 patches the issue. | 22 Oct |
| CVE-2026-87686 | 5.3 medium | 0.00% | broadcom, fabric_operating_system | An authentication and access control bypass vulnerability exists in the web server management interface of Brocade Fabric OS versions before 10.0.1. The web dispatcher routine evaluates internal management VLAN trust decisions using the client-supplied HTTP host header instead of the actual socket transport layer source IP address. Successful exploitation allows the attacker to bypass IP-filtering access control lists (ACLs) and obtain sensitive device metadata (such as model, serial number, hardware revision, and firmware version) without authentication. | 14 Oct |
| CVE-2026-72931 | 4.7 medium | 0.00% | microsoft, windows 10 version 1607, windows 10 version 1809, windows 10 version 21h2 | Missing release of resource after effective lifetime in Windows Secure Socket Tunneling Protocol (SSTP) allows an authorized attacker to deny service locally. | 13 h ago |
| CVE-2026-109976 | 4.7 medium | 0.00% | no CPE yet | A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon crashes when an AF_UNIX client connects to the data socket without a bound address, due to an integer underflow in the getpeername result handling. This causes a denial of service, preventing LUKS disk decryption from completing during boot. | Fri 30 Oct |
| CVE-2024-57974 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: udp: Deal with race between UDP socket address change and rehash If a UDP socket changes its local address while it's receiving datagrams, as a result of connect(), there is a period during which a lookup operation might fail to find it, after the address is changed but before the secondary hash (port and address) and the four-tuple hash (local and remote ports and addresses) are updated. Secondary hash chains were introduced by commit 30fff9231fad ("udp: bind() optimisation") and, as a result, a rehash operation became needed to make a bound socket reachable again after a connect(). This operation was introduced by commit 719f835853a9 ("udp: add rehash on connect()") which isn't however a complete fix: the socket will be found once the rehashing completes, but not while it's pending. This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a client sending datagrams to it. After the server receives the first datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to the address of the sender, in order to set up a directed flow. Now, if the client, running on a different CPU thread, happens to send a (subsequent) datagram while the server's socket changes its address, but is not rehashed yet, this will result in a failed lookup and a port unreachable error delivered to the client, as apparent from the following reproducer: LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4)) dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in while :; do taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc & sleep 0.1 || sleep 1 taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null wait done where the client will eventually get ECONNREFUSED on a write() (typically the second or third one of a given iteration): 2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused This issue was first observed as a seldom failure in Podman's tests checking UDP functionality while using pasta(1) to connect the container's network namespace, which leads us to a reproducer with the lookup error resulting in an ICMP packet on a tap device: LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')" while :; do ./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc & sleep 0.2 || sleep 1 socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null wait cmp tmp.in tmp.out done Once this fails: tmp.in tmp.out differ: char 8193, line 29 we can finally have a look at what's going on: $ tshark -r pasta.pcap 1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2 2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164 6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55 7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable) 9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192 11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096 12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0 On the third datagram received, the network namespace of the container initiates an ARP lookup to deliver the ICMP message. In another variant of this reproducer, starting the client with: strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,tru ---truncated--- | 21 Oct |
| CVE-2026-109969 | 4.7 medium | 0.00% | no CPE yet | A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon creates AF_UNIX sockets without explicit permission restrictions or peer credential verification. Under a permissive process umask, any local user can connect to the control socket and inject arbitrary device/key pairs, or connect to the data socket to receive LUKS passphrases. | 19 Oct |
| CVE-2025-38617 | 4.7 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history. | 15 Oct |
| CVE-2025-38524 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale. | 15 Oct |
| CVE-2025-37920 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race condition in AF_XDP generic RX path Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop. | 15 Oct |
| CVE-2022-50259 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix race in sock_map_free() sock_map_free() calls release_sock(sk) without owning a reference on the socket. This can cause use-after-free as syzbot found [1] Jakub Sitnicki already took care of a similar issue in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") [1] refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: events_unbound bpf_map_free_deferred RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246 RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5 R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004 R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] __sock_put include/net/sock.h:779 [inline] tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092 release_sock+0xaf/0x1c0 net/core/sock.c:3468 sock_map_free+0x219/0x2c0 net/core/sock_map.c:356 process_one_work+0x81c/0xd10 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> | 15 Oct |
| CVE-2024-38596 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in | 15 Oct |
| CVE-2024-36927 | 4.7 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix uninit-value access in __ip_make_skb() KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 | 15 Oct |
| CVE-2024-26923 | 4.7 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. | 15 Oct |
| CVE-2026-50215 | 4.4 medium | 0.00% | no CPE yet | A use-after-free exists in the Windows WFP packet-capture driver shipped with Akamai Guardicore Platform Agent (GPA) before 7.4. When an IPv6 proxy/redirect rule is active, a local attacker with Administrator privileges can send a single crafted outbound IPv6 packet via a raw IPV6_HDRINCL socket to trigger this at DISPATCH_LEVEL, resulting in an immediate system crash. | 17 Oct |
| CVE-2026-63640 | 4.3 medium | 0.00% | no CPE yet | MagicMirror² is an open source modular smart mirror platform. Prior to 2.37.0, when hideConfigSecrets is enabled, the catch-all socket dispatcher in js/node_helper.js passes every inbound object payload through replaceSecretPlaceholder in js/server_functions.js before invoking socketNotificationReceived. A client connected to a loaded module namespace can submit a SECRET_API_KEY placeholder, causing the server to replace it with the corresponding process environment value. The default weather helper accepts INIT_WEATHER, copies the attacker-controlled instanceId, and returns it in WEATHER_ERROR, providing an echo path for the expanded secret. This reverses the intended one-way redaction boundary and can disclose API tokens, credentials, or service keys stored in SECRET_ variables. This issue is fixed in version 2.37.0. | 22 Oct |
| CVE-2026-42095 | 4.0 medium | 0.00% | no CPE yet | bookserver in KDE Arianna before 26.04.1 allows attackers to read files over a socket connection by guessing a URL. | Mon 26 Oct |
| CVE-2026-114472 | 3.7 low | 0.00% | no CPE yet | Insufficient resource pool in the ACME HTTP-01 challenge responder of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to cause a certificate issuance or renewal to fail. When the server obtains or renews a TLS certificate over ACME it runs an HTTP-01 challenge responder on port 80 for the certificate authority to read the challenge token; the responder served one connection at a time, accepting a socket, waiting up to five seconds to receive a request, answering it, and only then accepting the next. A client that connected and sent nothing held the single worker for the whole timeout, so enough idle connections during a validation keep the certificate authority's own request from being answered in time and the validation fails. Sustained across a certificate's renewals this leads to the certificate expiring, after which clients refuse the server's TLS; the mail service itself continues on its current certificate until then. No authentication is required to connect to the responder. Version 6.3.7 serves up to 64 connections at once and closes a connection past that, so that where a handful of idle connections, one after another, sufficed before, a client must keep 64 idle connections open at once throughout a validation to have the certificate authority's connection closed. | Thu 29 Oct |
| CVE-2026-11811 | 3.7 low | 0.00% | no CPE yet | The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot. The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable. Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact. | 23 Oct |
| CVE-2026-115449 | 3.5 low | 0.00% | no CPE yet | A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide. | 23 Oct |
| CVE-2026-116696 | 3.3 low | 0.00% | no CPE yet | russh is a Rust SSH client and server library that includes an SSH agent protocol implementation. Prior to 0.65.0, russh::keys::agent::server::serve in russh/src/keys/agent/server.rs accepts repeated SSH_AGENT_CONSTRAIN_CONFIRM records while adding a key and appends every Constraint::Confirm record to the key's retained constraint vector without a count or memory limit. A process that can connect to the agent socket, including the remote side of a forwarded agent session, can repeatedly add constrained keys and cause renewable memory growth that persists for the process lifetime because keys without a lifetime constraint do not expire. This issue is fixed in version 0.65.0. | Tue 27 Oct |
| CVE-2026-48936 | 3.3 low | 0.00% | nodejs, node.js | A flaw in Node.js Permission API can cause a local server to be started (via a Unix domain socket), even without the `--allow-net` permission. This vulnerability affects one supported release line: **Node.js 26**. | Sun 25 Oct |
| CVE-2026-47336 | 3.3 low | 0.00% | canonical, ubuntu_linux | Ubuntu Linux 6.8 contains SAUCE patches with a possible use of an uninitialized variable in AppArmor AF_INET/AF_INET6 socket mediation code. The bug can be triggered by an unprivileged local user and could result in incorrect fine-grained mediation of network sockets. | 14 Oct |
| CVE-2026-47337 | 3.3 low | 0.00% | canonical, ubuntu_linux | Ubuntu Linux 6.8, 6.17 and 7.0 contain SAUCE patches with a possible NULL pointer dereference in the handling of AF_INET/AF_INET6 socket mediation. The bug can be triggered by an unprivileged local user. This can lead to a kernel oops. | 14 Oct |
| CVE-2026-11812 | 2.5 low | 0.00% | no CPE yet | The UpdateHub management subsystem (subsys/mgmt/updatehub/updatehub.c) drives every update operation through a single file-scope ctx structure that holds the CoAP block context, payload buffer, status code, socket, and a one-element poll-fd array fds[1]. Access to ctx was not serialized, and prepare_fds() wrote ctx.fds[ctx.nfds] and incremented ctx.nfds with no bounds check. Two independent paths mutate ctx concurrently: the background autohandler running on the system workqueue, and user-triggered operations reached through the updatehub run shell command, direct API calls, or — since the operations are exposed as syscalls — userspace threads. When a second flow enters prepare_fds() while ctx.nfds is already 1, the write lands one element past the array; by struct layout it overlaps the adjacent ctx.sock/ctx.nfds members. More broadly, the unsynchronized sharing lets two flows interleave connection setup and teardown, double-closing a socket descriptor or scribbling the shared buffers. The result is corruption of the update subsystem's internal state and denial of service of the firmware-update path; the out-of-bounds write is contained within the ctx structure and there is no demonstrated path to memory outside it or to code execution. Triggering requires a local actor able to invoke update operations (or, with CONFIG_USERSPACE, an unprivileged userspace thread) and to win a timing race against the background handler; remote peers cannot control the race timing. The fix serializes the entry points with a mutex and adds a bounds check to prepare_fds(). | 23 Oct |
| CVE-2026-63641 | 2.3 low | 0.00% | no CPE yet | MagicMirror² is an open source modular smart mirror platform. Prior to 2.37.0, MagicMirror applies ipWhitelist only as Express middleware, while the Socket.IO server in js/server.js is attached directly to the HTTP server without equivalent IP allowlist, origin, or namespace authentication checks. In a documented non-loopback deployment that relies on ipWhitelist, an unauthenticated adjacent-network client can connect directly to module Socket.IO namespaces, and js/node_helper.js dispatches arbitrary events and payloads to socketNotificationReceived. The default newsfeed and calendar helpers can make server-side requests to attacker-selected URLs, while the default updatenotification helper can reach child_process.exec when a third-party module update is pending and the attacker supplies an update command through the socket CONFIG path. This can expose internal services, manipulate module-helper state, and conditionally execute commands. This issue is fixed in version 2.37.0. | 22 Oct |
| CVE-2026-99213 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock: treat TCP_CLOSING as once-established Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link. | 16 h ago |
| CVE-2026-99123 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path. | 16 h ago |
| CVE-2026-99122 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer. | 16 h ago |
| CVE-2026-99116 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone. | 16 h ago |
| CVE-2026-82942 | unscored | 0.00% | no CPE yet | A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA are not affected. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3505 | Fri 30 Oct |
| CVE-2026-82425 | unscored | 0.00% | no CPE yet | A reachable assertion in Apache bRPC (version < 1.18.0) on all platforms allows a malicious remote peer to crash the process, resulting in denial of service. Root Cause: When a Socket with health checking enabled fails, Socket::WaitAndReset closes its file descriptor while the event dispatcher may still be delivering an input event (EPOLLIN/EVFILT_READ) that was fetched for the just-closed fd. If the health check then succeeds and revives the Socket, Socket::Address succeeds again while the fd is still -1 (the next write reconnects on demand). In that window, Socket::OnInputEvent hits CHECK(!(events & EPOLLIN)) (or the kqueue equivalent) because the Socket is addressable but has no fd. CHECK failures terminate the process when bRPC is built with glog or when the gflag -crash_on_fatal_log is enabled (CHECK always terminates in OFFICIAL_BUILD/NDEBUG builds as well). Affected Scenarios: Applications using bRPC clients with health check enabled (-health_check_interval). A malicious remote peer that the client connects to can deliberately abort connections and immediately accept the health check probes, racing connection teardown against health check revival to trigger the assertion and abort the process. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3510 Note: After applying the fix, stale input events on a Socket revived without an fd are silently dropped instead of triggering the assertion. No user-visible interface or wire protocol is changed. | Fri 30 Oct |
| CVE-2026-113812 | unscored | 0.00% | no CPE yet | Mozilla::CA versions before 20261020 for Perl provide a CA certificate bundle containing a root linked to compromised intermediates. The bundle includes "emSign ECC Root CA - G3", which provides a trust path for intermediate certificates whose private keys are publicly available. An attacker able to intercept or redirect client traffic may use these keys to impersonate a TLS server. LWP, HTTP::Tiny and other clients normally use IO::Socket::SSL, which looks for CA certificates in OpenSSL's default locations before falling back to Mozilla::CA. Configuration and environment variables can override this selection. Users should check which CA store their client uses. If it uses the system store, check for and install the operating system vendor's updates for this incident. | Fri 30 Oct |
| CVE-2026-99211 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netlink: reset skb headers before unicast and multicast filtering Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code. | Fri 30 Oct |
| CVE-2026-99201 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netlink: avoid hashing the network namespace pointer The netlink rhashtable key includes a raw struct net pointer and a user-controlled port ID. Both /proc/net/netlink and socket diagnostics expose the table's bucket order. By binding and rebinding chosen NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal buckets and recover the low bits of the Jenkins hash. Its 32-bit seed and the limited set of kernel-image slides can then be searched offline to recover the address of init_net. Use the namespace's unique, non-address net_cookie in the comparison key instead. It is assigned before the per-net initializers run and remains unchanged for the namespace's lifetime. The lookup key and object hash are still built by netlink_compare_arg_init(), keeping lookup, insertion, removal and rehashing consistent while preserving namespace separation. Neither public table walker needs to change. Reading the socket's namespace cookie in netlink_compare() is safe under RCU, including during namespace teardown. netlink_release() removes the socket from the hash table and defers its final put with call_rcu(). cleanup_net() runs the per-net exit methods and waits for outstanding RCU callbacks with rcu_barrier() before freeing namespace storage. Unlike ns.ns_id, net_cookie is also available and initialized during setup_net() in older stable kernels, making the change straightforward to backport to v5.15 and later. | Fri 30 Oct |
| CVE-2026-99165 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. | Fri 30 Oct |
| CVE-2026-99133 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped. | Fri 30 Oct |
| CVE-2026-99127 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: page_pool: keep frag_offset aligned for odd-sized requests page_pool_alloc_frag_netmem() rounds the requested fragment size with size = ALIGN(size, dma_get_cache_alignment()); dma_get_cache_alignment() returns 1 unless the architecture defines ARCH_DMA_MINALIGN, which DMA-coherent architectures such as x86 do not. There the ALIGN() is a no-op and pool->frag_offset advances by the raw, unrounded size. A single caller asking for an odd size then leaves frag_offset misaligned for every fragment carved out of that page afterwards. The pool is shared, so the damage is not confined to the caller that caused it. The per-cpu system_page_pool used by generic XDP hits this. skb_pp_cow_data() allocates its fragments with the raw packet length: size = min_t(u32, len, PAGE_SIZE); truesize = size; page = page_pool_dev_alloc(pool, &page_off, &truesize); leaving frag_offset odd for whatever is carved out of that page next. Its own head allocation is already aligned -- SKB_HEAD_ALIGN(size) plus the XDP_PACKET_HEADROOM its callers pass -- so it is a later user of the shared pool that pays: page_pool_dev_alloc_va() returns a misaligned buffer, napi_build_skb() installs it as skb->head, and skb_shinfo(skb) == skb->head + skb->end is misaligned with it. skb_shinfo()->dataref is a 4-byte atomic_t at offset 0x20, so the atomic_inc() in __skb_clone() straddles a cache line. On x86 with split lock detection -- fatal for kernel split locks by default -- this panics the machine: Oops: Split lock detected RIP: 0010:skb_clone+0x154/0x1e0 Call Trace: <IRQ> raw_local_deliver+0x1ed/0x2c0 ip_protocol_deliver_rcu+0x54/0x1c0 ip_local_deliver_finish+0x85/0x100 ip_local_deliver+0x67/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 Reproduced by attaching any generic-mode XDP program to loopback and opening a RAW IPPROTO_UDP socket, which makes raw_local_deliver() clone every locally delivered UDP packet; ordinary DNS traffic then triggers it, roughly once per 2500 clones. Observed on 6.12.101 and 7.1.8. Tracing page_pool_alloc_frag_netmem() over one such run shows the amplification -- two odd-sized requests, nine misaligned offsets: requested size & 7: 0: 17035 5: 1 7: 1 frag_offset & 7: 0: 17028 3: 1 4: 1 5: 1 6: 1 7: 5 and skb_pp_cow_data() returning heads that were aligned on entry: head 0xffff8f4c86aeac00 -> 0xffff8f4c53a9a9c4 (&7=4) head 0xffff8f4d6a8a42c0 -> 0xffff8f4c4f7b7a45 (&7=5) Round the fragment size up to at least the alignment struct skb_shared_info requires, so fragments are always suitably aligned for the objects callers build on them. Architectures needing a larger DMA alignment keep it. This also makes the remainder computed in page_pool_alloc_netmem(), *size = max_size - *offset; aligned, since max_size is a power of two -- which fixes the matching misalignment of skb->end. Verified with a controlled A/B under QEMU/KVM: same tree, same config, same compiler, same rootfs and identical traffic, differing only by this patch. A SEC("xdp.frags") XDP_PASS program on lo plus UDP datagrams larger than max_head_size drives skb_pp_cow_data()'s fragment loop, which passes raw packet lengths to the pool. Measured at the return of skb_pp_cow_data(): unpatched patched skb_pp_cow_data calls 40800 40800 misaligned skb->head 1120 0 dataref at line offset >60 80 0 The last row counts the accesses that actually fault: skb_shinfo()->dataref sits at head+end+0x20 and is a 4-byte atomic, so `lock incl` splits a 64-byte cache line only when that address lands at offset 61..63. All 80 occurrences were at offset 61; the panic reported above was at offset 62. Eliminating the misalignment removes every one of them. Same class of bug as commit 3bed3cc4156e ("net: Do not allocate page fragments t ---truncated--- | Fri 30 Oct |
| CVE-2026-99091 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This was seen on a QCA9377 laptop: bluetoothd's Start Discovery, pending when the adapter was powered off, was answered with Command Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the zero-length success. BlueZ master has since added the length check on that path ("adapter: Fix crash on short start discovery reply", BlueZ a734b06059cb), but userspace should still be told Not Powered, not Success. Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci): power off is held in HCI Write Scan Enable while a Start Discovery is submitted, and the flush answers it with status 0x00 before this change and 0x0f (Not Powered) after. | Fri 30 Oct |
| CVE-2026-99088 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: <TASK> set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800 | Fri 30 Oct |
| CVE-2026-99033 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. | Fri 30 Oct |
| CVE-2026-99015 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep. | Fri 30 Oct |
| CVE-2026-99010 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dlcs() keeps granting credits, so the remote keeps sending and the leak keeps growing. Free the skb, as the tty side does. | Fri 30 Oct |
| CVE-2026-99009 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer. | Fri 30 Oct |
| CVE-2026-98846 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | Fri 30 Oct |
| CVE-2026-98812 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/mctp: publish the mctp_dev only after it is initialised mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev is assigned, so a reader that picks the device up in that window dereferences a net_device pointer that is still NULL: KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7] Call Trace: <TASK> ? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49) ? __pfx_mctp_dst_output (net/mctp/route.c:41) ? selinux_socket_sendmsg (security/selinux/hooks.c:5278) ____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790 (discriminator 1) net/socket.c:2684 (discriminator 1)) ? __pfx_____sys_sendmsg (net/socket.c:1131) ? __pfx_copy_msghdr_from_user (net/socket.c:2590) ? update_cfs_rq_load_avg (kernel/sched/fair.c:5478) ___sys_sendmsg (net/socket.c:2738) ? __pfx____sys_sendmsg (net/socket.c:2625) ? perf_event_task_tick (./include/linux/rcupdate.h:838) ? sched_tick (kernel/sched/core.c:5818) ? clockevents_program_event (kernel/time/clockevents.c:372) ? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100) __sys_sendmsg (net/socket.c:2770) ? __pfx___sys_sendmsg (net/socket.c:2751) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fix by publishing only once the object is fully initialised: __mctp_dev_get() runs under rcu_read_lock() only and hands this object to readers as soon as mctp_ptr is assigned, so they must never observe mdev->dev == NULL. | Fri 30 Oct |
| CVE-2026-98733 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl() does, to serialize insertion against dequeue while preserving fragment ordering. | Fri 30 Oct |
| CVE-2026-98297 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work unconditionally. They can run from the L2CAP/SCO/ISO socket send path while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN racing with a socket write). Since that queue_work() is not chained work from the tx_work worker itself, __queue_work() sees the queue marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops the work: WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work Call Trace: queue_work_on l2cap_chan_send l2cap_sock_sendmsg ... hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer() check it before queuing. Route the tx_work producers through the same guard via a shared hci_sched_tx() helper. | Fri 30 Oct |
| CVE-2026-97939 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). | Fri 30 Oct |
| CVE-2026-97597 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New-label admission remains under the existing mem_check() policy. Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching mem_check(). An unprivileged user must not bypass the cap by creating a user namespace and a netns where they have CAP_NET_ADMIN, which would still consume host memory. Check the capability only when the socket reaches the limit, so successful unprivileged GET requests below the cap do not generate a capability audit. Do the admission check before updating linger and expires so a rejected GET does not refresh the shared label, matching the existing socket-list allocation failure path. | Fri 30 Oct |
Download these 633 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.