Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
CVSS low ×
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-57288 | 3.7 low | 0.00% | jenkins, active_directory | Jenkins Active Directory Plugin 2.41.1 and earlier does not escape the user name before building the LDAP search filter in the Windows native (ADSI) authentication path, allowing unauthenticated attackers to inject LDAP wildcard characters to enumerate directory entries and to authenticate as a matching user whose password they know without knowing their exact user name. | Sun 25 Oct |
| CVE-2026-13758 | 3.7 low | 0.00% | no CPE yet | CryptX versions before 0.088_001 for Perl compare AEAD authentication tags in non-constant time in the streaming decrypt_done path. The decrypt_done($tag) form compares it against the computed tag with memNE (memcmp() != 0), which short-circuits on the first differing byte, so its run time depends on the number of matching leading bytes. This affects all five AEAD modes: GCM, CCM, ChaCha20Poly1305, EAX and OCB. The one-shot *_decrypt_verify helpers are unaffected; they verify the tag inside libtomcrypt with a constant-time comparison. The timing difference is a tag-verification oracle. An attacker who can submit many candidate tags for the same nonce, ciphertext and associated data while measuring the timing precisely enough may recover the expected tag byte by byte and forge a message that verifies. | Sun 25 Oct |
| CVE-2026-44042 | 3.7 low | 0.00% | uvnc, ultravnc | UltraVNC repeater through 1.8.2.2 contains an off-by-one error in the Base64 decode helper used for HTTP Basic authentication. In repeater/webgui/webutils.c:817, the wi_uudecode() function checks whether the input length exceeds the output buffer with a strict greater-than comparison (>), while the correct check should be greater-than-or-equal (>=). When strlen(authdata) equals sizeof(decode), the decoded output length (approximately 3/4 of input) does not overflow the buffer in current practice because the outer HTTP request bounds constrain the Authorization header. However, the defective check leaves a latent off-by-one condition that could become exploitable if the buffering constraints change. The current risk is limited to a one-byte write at the boundary of a 1024-byte stack buffer under constrained conditions. | Sun 25 Oct |
| CVE-2026-54696 | 3.7 low | 0.00% | no CPE yet | Ruby JSON is a JSON implementation for Ruby. Versions 2.9.0 through 2.19.8 are vulnerable to heap buffer overflow when the JSON generator is provided with an oversized streamed object. When streaming to an IO JSON.dump(obj, io) and JSON::State#generate(obj, io) can write past the internal JSON generator buffer when a streamed object contains an attacker-controlled string near 16 KB. Exploitation would result in a reliable process crash/denial of service. This issue has been fixed in version 2.19.9. | Sun 25 Oct |
| CVE-2026-44753 | 3.7 low | 0.00% | no CPE yet | SAP HANA Database (user self service tools) allows an unauthenticated user to send specially crafted requests that produce distinguishable responses, enabling enumeration of valid user accounts and email addresses. Successful exploitation could allow the attacker to enumerate valid user accounts, resulting in low impact on confidentiality, with no impact on integrity and availability of the application. | Sat 24 Oct |
| CVE-2026-56587 | 3.7 low | 0.00% | hcltech, intelliops_event_management | HCL IEM was affected with Strict transport security not enforced. It may enable attackers to perform SSL stripping or man-in-the-middle attacks and compromise secure communications. | Sat 24 Oct |
| CVE-2026-54335 | 3.7 low | 0.00% | no CPE yet | Feathersjs is a framework for creating web APIs and real-time applications with TypeScript or JavaScript. In 5.0.44 and earlier, the _.merge(target, source) utility exported by @feathersjs/commons recursively merges source into target by iterating Object.keys(source). When source was produced by JSON.parse and contains a __proto__, constructor, or prototype key, that key is returned as an own-enumerable property; the recursive merge then resolves target['__proto__'] to Object.prototype and writes attacker-supplied properties onto it, polluting the prototype for all plain objects in the process for the lifetime of the Node process. This issue is fixed in version 5.0.45. | Sat 24 Oct |
| CVE-2026-60919 | 3.7 low | 0.00% | oracle, isupplier_portal | Vulnerability in the Oracle iSupplier Portal product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle iSupplier Portal. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle iSupplier Portal accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | Sat 24 Oct |
| CVE-2026-60628 | 3.7 low | 0.00% | oracle, jd_edwards_enterpriseone_tools | Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Installation Security). The supported version that is affected is 9.2.26.3. Difficult to exploit vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of JD Edwards EnterpriseOne Tools accessible data as well as unauthorized read access to a subset of JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:N). | Sat 24 Oct |
| CVE-2026-60357 | 3.7 low | 0.00% | oracle, siebel_crm | Vulnerability in the Siebel CRM Integration product of Oracle Siebel CRM (component: Siebel Server Sync for Exchange). Supported versions that are affected are 17.0-26.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM Integration. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Siebel CRM Integration accessible data. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | Sat 24 Oct |
| CVE-2026-60354 | 3.7 low | 0.00% | oracle, jdeveloper | Vulnerability in the Oracle JDeveloper product of Oracle Fusion Middleware (component: Data Visualization Tools). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle JDeveloper. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle JDeveloper accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | Sat 24 Oct |
| CVE-2026-60352 | 3.7 low | 0.00% | oracle, jdeveloper | Vulnerability in the Oracle JDeveloper product of Oracle Fusion Middleware (component: ADF Faces). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle JDeveloper. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle JDeveloper accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | Sat 24 Oct |
| CVE-2026-60346 | 3.7 low | 0.00% | oracle, jd_edwards_enterpriseone_tools | Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Interoperability Security). The supported version that is affected is 9.2.26.3. Difficult to exploit vulnerability allows unauthenticated attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | Sat 24 Oct |
| CVE-2026-70437 | 3.7 low | 0.00% | no CPE yet | Jenkins Webhook Secret Credentials Provider Plugin 16.v0cfa_f0215cf5 and earlier does not use a constant-time comparison function when checking whether the provided and expected webhook bearer token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook bearer token. | Sat 24 Oct |
| CVE-2026-66774 | 3.7 low | 0.00% | sap, approuter | SAP Approuter does not consistently handle certain error conditions. An attacker with low privileges could exploit this under a non-default configuration. Successful exploitation is highly complex, as it depends on conditions outside the attacker's control. This could result in a low impact on availability. There is no impact on confidentiality and integrity. | Sat 24 Oct |
| CVE-2026-58239 | 3.7 low | 0.00% | sap, approuter | SAP Approuter does not sufficiently validate tenant context in inbound requests. An unauthenticated attacker could send specially crafted requests to spoof the tenant context under conditions not fully within their control. Successful exploitation could allow limited access to another tenant's information, resulting in a low impact on confidentiality. There is no impact on integrity and availability. | Sat 24 Oct |
| CVE-2026-61104 | 3.7 low | 0.00% | oracle, peoplesoft_enterprise_cs_student_records | Vulnerability in the PeopleSoft Enterprise CS Student Records product of Oracle PeopleSoft (component: Research Tracking). The supported version that is affected is 9.2.38. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise CS Student Records. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise CS Student Records accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | Sat 24 Oct |
| CVE-2026-61015 | 3.7 low | 0.00% | oracle, time_and_labor | Vulnerability in the Oracle Time and Labor product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Time and Labor. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Time and Labor accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | Sat 24 Oct |
| CVE-2026-71849 | 3.7 low | 0.00% | no CPE yet | Hono is a Web application framework that provides support for any JavaScript runtime. From 4.7.0 to 4.12.33, the Proxy Helper proxy() function in hono/proxy does not remove response headers named by the origin's Connection header. Per RFC 9110 Section 7.6.1, an intermediary must remove the header fields listed in a message's Connection header field before forwarding the message, in addition to the well known hop by hop headers, but the proxy() function only removed the well known hop by hop headers, including Connection itself, from origin responses. A client may therefore receive response headers that the origin intended only for its immediate peer, disclosing connection scoped or internal metadata contained in such headers, when an application proxies responses from an origin that declares additional, non standard headers as hop by hop via the Connection response header. This issue is fixed in version 4.12.34. | Sat 24 Oct |
| CVE-2026-73425 | 3.7 low | 0.00% | no CPE yet | Astro is a web framework for content-driven websites. Prior to 8.1.2, the Astro Netlify adapter converts each image.remotePatterns entry into a regular expression written to .netlify/v1/config.json under images.remote_images for Netlify's Image CDN allowlist. In packages/integrations/netlify/src/index.ts, remotePatternToRegex() escapes dots in hostname values but interpolates literal pathname values without escaping regular expression metacharacters such as ., +, ?, (, and [, so a restrictive pathname such as /img/v1.0/file also matches metacharacter-adjacent paths, including paths that cross a segment. Netlify enforces the generated regular expression directly and Astro's matchPattern() helper does not revalidate the request, allowing optimization of images on an already-allowed host that the declared pathname was intended to exclude. This issue is fixed in version 8.1.2. | Sat 24 Oct |
| CVE-2026-52686 | 3.7 low | 0.00% | no CPE yet | The issue is a DNSSEC validation bypass where wildcard expansion proofs (NSEC/NSEC3 records) are accepted without signature validation when the wildcard answer is a CNAME or DNAME record. | Sat 24 Oct |
| CVE-2026-52684 | 3.7 low | 0.00% | no CPE yet | If the auth responds very slowly and the records expire in between, the capping of TTLs is not enforced for lack of data. This does not happen on regular resolve as then then the child records are used immediately if not expired and thus valid, or the records are expired, and in that case not used. So this case can only happen if almost expired records are used to refresh the authoritative NS records. | Sat 24 Oct |
| CVE-2026-54478 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.18.0 up to and including 1.25.1, when Unbound listens on a 'proxy-protocol-port' interface with 'answer-cookie: yes', the RFC 9018 server-cookie SipHash is computed over the proxy's wire address instead of the PROXYv2-declared client. One server cookie obtained through a given proxy node therefore validates for every PROXYv2-declared source behind that node. On a UDP+proxy-protocol front, an off-path attacker can harvest one cookie with a single legitimate query, then replay it under any spoofed source and pass DNS Cookie checks that were deployed to defeat this in the first place. | Sat 24 Oct |
| CVE-2026-46582 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, a replay of a wildcard rrset as another piece of data, could be briefly considered DNSSEC secure based only on the RRSIG validation and stored into cache, before later validation treats it as bogus based on NSEC validation. When the resolving thread puts secure on the rrset, and another thread that is on the serve expired path then picks up the updated rrset contents with the secure status for a reply, it can be used to change a specific record, next to a wildcard that could be covered by the wildcard, into the wildcard. A malicious actor can exploit the possible poisonous effect by having any DNSSEC-singed domain (irrelevant to the victim domain) and a CNAME wrapper record that points to a record next to a wildcard (that could be covered by the wildcard). Then quering Unbound for the wildcard sibling record would seed the secure message. A later (after expiry) query for the CNAME wrapper would need to resolve the target sibling record. If the wildcard replay is injected into the response, the wildcard rrset will update the expired sibling record with a secure status before completing proper wildcard validation with NSEC records and eventually treating the CNAME wrapper answer as bogus. The updated poisoned rrset is now secure and points to the wildcard. This vulnerability is explicit for the serve expired path and needs injection of the signed wildcard rrset without the NSEC accompanying rrset. | Sat 24 Oct |
| CVE-2026-44687 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone). | Sat 24 Oct |
| CVE-2026-42955 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query. | Sat 24 Oct |
| CVE-2026-41637 | 3.7 low | 0.00% | nlnetlabs, unbound | In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. | Sat 24 Oct |
| CVE-2026-91471 | 3.7 low | 0.00% | no CPE yet | Vulnerability in the PeopleSoft Enterprise CC Common Application Objects product of Oracle PeopleSoft (component: BAM Framework). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise CC Common Application Objects. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise CC Common Application Objects accessible data. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | Sat 24 Oct |
| CVE-2026-91461 | 3.7 low | 0.00% | no CPE yet | Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | Sat 24 Oct |
| CVE-2026-63236 | 3.7 low | 0.00% | no CPE yet | An improper access control vulnerability in Koollab LMS allowed an unauthenticated attacker to read another user's name, internal identifier, scores, lesson status, lesson position, and cached lesson state via the SCORM API endpoint. | Fri 23 Oct |
| CVE-2026-63235 | 3.7 low | 0.00% | no CPE yet | An improper access control vulnerability in Koollab LMS allowed an unauthenticated attacker to forcibly terminate the session of any user given their email address via the login kickout endpoint, resulting in a denial of service. | Fri 23 Oct |
| CVE-2026-55403 | 3.7 low | 0.00% | no CPE yet | datamodel-code-generator generates Python data models from schema definitions. Prior to 0.63.0, src/datamodel_code_generator/http.py get_body reuses Authorization, Cookie, and Proxy-Authorization headers when following cross-origin redirects while fetching remote schemas, allowing credentials scoped to one schema host to be leaked to another redirect target. This issue is fixed in version 0.63.0. | Fri 23 Oct |
| CVE-2026-48082 | 3.7 low | 0.00% | no CPE yet | OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.6, the bootstrap challenge endpoint at `/api/tenants/{id}/appointments/bootstrap-challenge` issues a SHA-256 proof-of-work with `difficulty=4` hex zeros, equivalent to 16 bits of work. Modern hardware solves this in under 200 milliseconds, providing essentially no friction against automated abuse of the patient booking flow. Proof-of-work is used in the booking flow as a rate-limiter for unauthenticated clients establishing tunnels and submitting appointments. At 16 bits of difficulty, the construct is decorative rather than effective. An attacker can solve PoW challenges as fast as the server can issue them, defeating the rate-limiting purpose. The handler also calls `challengeThrottleService.checkThrottle(binding, "passkey")`, but the binding includes attacker-controlled values (`tunnelId`, `clientPublicKey`, and optional `emailHash`). For each fresh attempt, the attacker can supply new values, producing a new throttle key and bypassing the per-binding accumulation. Practical abuse friction is therefore the PoW difficulty itself, not a stable per-IP or per-email server-side throttle. Version 1.0.6 fixes the issue. | Fri 23 Oct |
| CVE-2026-12372 | 3.7 low | 0.00% | nltk | A Server-Side Request Forgery (SSRF) vulnerability exists in nltk/nltk versions 3.9.4 and the current develop branch. The `nltk.pathsec.validate_network_url()` function, intended to prevent SSRF by rejecting internal network addresses, fails to reject IPs in the RFC 6598 shared address space (`100.64.0.0/10`). This occurs because Python's `ipaddress` module does not classify such addresses as `is_private` or `is_global`, and the current guard only checks `is_private` and a few explicit categories. An attacker who can influence a URL passed to NLTK's network-loading helpers can exploit this vulnerability to make a strict-mode application send requests to shared-address-space hosts, potentially exposing non-public infrastructure reachable from the application host. The impact is limited to SSRF-style confidentiality exposure, with no code execution claimed. | Fri 23 Oct |
| CVE-2026-91409 | 3.7 low | 0.00% | no CPE yet | Vulnerability in Oracle Java SE (component: Networking). The supported version that is affected is Oracle Java SE: 27. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | Fri 23 Oct |
| CVE-2026-44762 | 3.7 low | 0.00% | no CPE yet | SAP Data Services Management Console allows an overly permissive Content Security Policy (CSP) configuration and lacks certain restrictive directives, which could enable an authenticated malicious user to leverage this weakness in combination with another vulnerability to inject and execute malicious scripts within the application's context. Successful exploitation may result in a low impact on confidentiality and integrity, with no impact on the availability of the application. | Fri 23 Oct |
| CVE-2026-11811 | 3.7 low | 0.00% | no CPE yet | The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot. The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable. Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhausted, networking degrades device-wide until the device is rebooted, a denial-of-service condition. Severity is low because the leak rate is bounded by the configured OTA poll interval (default once per 24 hours), the effect is gradual and recovered by reboot, and only builds with the UpdateHub client enabled are affected. There is no memory-corruption, information-disclosure, or authentication impact. | Fri 23 Oct |
| CVE-2026-11809 | 3.7 low | 0.00% | no CPE yet | The UpdateHub OTA client in subsys/mgmt/updatehub/updatehub.c contains an out-of-bounds / uninitialized-memory read in z_impl_updatehub_probe(). The probe response from the UpdateHub server is copied into a heap buffer (metadata) that is correctly NUL-terminated, but a second buffer (metadata_copy) is allocated with k_malloc (unzeroed) and filled with memcpy(metadata_copy, metadata, strlen(metadata)), which omits the terminating NUL. Everything after the copied content remains uninitialized heap. When the first json_obj_parse() over the array descriptor fails, the code falls back to json_obj_parse(metadata_copy, strlen(metadata_copy), ...). The strlen() call scans past the copied bytes through uninitialized heap and, if no zero byte is found before the end of the allocation, reads beyond the buffer; the resulting over-long length is then parsed as JSON. The probe payload is fully controlled by the (malicious, compromised, or — without the optional CONFIG_UPDATEHUB_DTLS — on-path) UpdateHub server, which can craft a large payload that fails the first parse to drive this path. The consequence is a read of uninitialized heap, with a worst case of an out-of-bounds read past the metadata_copy allocation that can fault and crash the update thread/device, producing a network-triggerable denial of service. The over-read data is consumed only internally to evaluate the update and is not returned to the attacker, so there is no direct information disclosure and no out-of-bounds write. The fix zeroes metadata_copy with memset before the copy, guaranteeing NUL termination and bounding strlen() within the allocation. | Fri 23 Oct |
| CVE-2026-112230 | 3.7 low | 0.00% | no CPE yet | The Popup Builder WordPress plugin before 4.4.6 does not perform authorization checks before trashing popup content in a maintenance routine that runs on unauthenticated requests, allowing unauthenticated attackers to move affected popups into the Trash and overwrite their stored preview data. | 23 Oct |
| CVE-2026-101402 | 3.7 low | 0.00% | no CPE yet | Vulnerability in the Siebel Apps - Marketing product of Oracle Siebel CRM (component: Email Marketing). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel Apps - Marketing. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Siebel Apps - Marketing. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | 23 Oct |
| CVE-2026-4633 | 3.7 low | 0.00% | redhat, build_of_keycloak | A flaw was found in Keycloak. A remote attacker can exploit differential error messages during the identity-first login flow when Organizations are enabled. This vulnerability allows an attacker to determine the existence of users, leading to information disclosure through user enumeration. | 22 Oct |
| CVE-2026-0976 | 3.7 low | 0.00% | no CPE yet | A flaw was found in Keycloak. This improper input validation vulnerability occurs because Keycloak accepts RFC-compliant matrix parameters in URL path segments, while common reverse proxy configurations may ignore or mishandle them. A remote attacker can craft requests to mask path segments, potentially bypassing proxy-level path filtering. This could expose administrative or sensitive endpoints that operators believe are not externally reachable. | 22 Oct |
| CVE-2026-60853 | 3.7 low | 0.00% | oracle, helidon | Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). Supported versions that are affected are 3.0.0-3.2.19. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | 22 Oct |
| CVE-2026-60589 | 3.7 low | 0.00% | no CPE yet | Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u501, 11.0.32, 17.0.20, 21.0.12, 25.0.4, 26.0.2; Oracle GraalVM for JDK: 17.0.20 and 21.0.12; Oracle GraalVM Enterprise Edition: 21.3.19. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | 22 Oct |
| CVE-2026-70682 | 3.7 low | 0.00% | oracle, hyperion_calculation_manager | Vulnerability in the Oracle Hyperion Calculation Manager product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Calculation Manager. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Calculation Manager accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | 22 Oct |
| CVE-2026-62533 | 3.7 low | 0.00% | oracle, hyperion_calculation_manager | Vulnerability in the Oracle Hyperion Calculation Manager product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Calculation Manager. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Calculation Manager accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | 22 Oct |
| CVE-2026-70785 | 3.7 low | 0.00% | oracle, hyperion_financial_reporting | Vulnerability in the Oracle Hyperion Financial Reporting product of Oracle Hyperion (component: Server). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Financial Reporting. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Financial Reporting accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). | 22 Oct |
| CVE-2026-84918 | 3.7 low | 0.00% | no CPE yet | Improper Verification of Cryptographic Signature vulnerability in Drupal Monobank payment API allows Signature Spoof. This issue affects Monobank payment API versions: from 0.0.0 to 1.0.3. | 22 Oct |
| CVE-2026-84916 | 3.7 low | 0.00% | no CPE yet | Missing Authorization vulnerability in Drupal Islandora allows Forceful Browsing. This issue affects Islandora versions: from 0.0.0 to 2.19.0. | 22 Oct |
| CVE-2026-73923 | 3.7 low | 0.00% | oracle, helidon | Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). Supported versions that are affected are 1.0.0-1.4.19. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Helidon accessible data. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | 22 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-29. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.