Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-63888 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. | Mon 26 Oct |
| CVE-2026-8592 | 9.8 critical | 1.0% | rapid7, insightconnect_awk | OS Command Injection vulnerability in the process_string action of Rapid7 InsightConnect AWK Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to unsafe shell command construction in the processing pipeline. | Sun 25 Oct |
| CVE-2026-8660 | 9.8 critical | 1.0% | rapid7, insightconnect_ping | OS Command Injection vulnerability in the ping action of Rapid7 InsightConnect Ping Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host parameter due to insufficient input validation when constructing shell commands. | Sun 25 Oct |
| CVE-2026-8665 | 9.8 critical | 1.0% | rapid7, insightconnect_translate | OS Command Injection vulnerability in the TR action of Rapid7 InsightConnect Translate Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to insufficient input sanitization in shell command construction. | Sun 25 Oct |
| CVE-2026-8666 | 9.8 critical | 1.0% | rapid7, insightconnect_traceroute | OS Command Injection vulnerability in the traceroute action of Rapid7 InsightConnect Traceroute Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host, port, max_ttl, count, or time_out request parameters due to insufficient input validation when constructing shell commands. | Sun 25 Oct |
| CVE-2026-9182 | 9.8 critical | 1.0% | esri, arcgis_server | Esri ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload, potentially allowing for other attacks. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes. | Sun 25 Oct |
| CVE-2026-13019 | 9.8 critical | 1.0% | esri, portal_for_arcgis | Esri Portal for ArcGIS versions 12.1 and earlier on Windows, Linux and Kubernetes have a missing authentication for critical function vulnerability allows a remote, unauthenticated attacker to access an unprotected API. The following versions are known to be affected: Portal for ArcGIS 12.1 and earlier. Other unsupported versions may also be affected. Esri recommends that users apply the Portal for ArcGIS Security 2026 Update 2 Patch to remediate this vulnerability. | Sun 25 Oct |
| CVE-2026-24254 | 9.8 critical | 1.0% | nvidia, dynamo | NVIDIA Dynamo for Linux contains a vulnerability in the multimodal serving topology, where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. | Sat 24 Oct |
| CVE-2026-98959 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT touch $MNT/testfile # Add two xattrs that, on btrfs, have the same hash (crc32c) for their # name and therefore are packed into the same btrfs_dir_item. setfattr -n user.foobar -v 123 $MNT/testfile setfattr -n user.WvG1c1Td -v qwerty $MNT/testfile # Verify the xattrs are present. echo "xattrs before:" getfattr --absolute-names --dump $MNT/testfile # Now replace the value of the foobar xattr with a significantly larger # value. setfattr -n user.foobar -v abcdefghijklmnopqrstuvwxyz $MNT/testfile # Check the xattrs have the expected values. echo "xattrs after:" getfattr --absolute-names --dump $MNT/testfile umount $MNT Running it: $ ./test.sh (...) xattrs before: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" user.foobar="123" xattrs after: # file: /mnt/sdi/testfile user.WvG1c1Td="qwerty" So the "user.foobar" xattr is missing and there was a transaction abort when unmounting the fs with the following traces in dmesg: $ dmesg [869800.159271] BTRFS warning (device sdi): access to eb bytenr 30474240 len 16384 out of range start 16015 len 25964 [869800.159293] ------------[ cut here ]------------ [869800.159296] WARNING: fs/btrfs/extent_io.c:4408 at report_eb_range+0x44/0x60 [btrfs], CPU#8: getfattr/2605179 [869800.168961] Modules linked in: btrfs dm_thin_pool (...) [869800.190527] CPU: 8 UID: 0 PID: 2605179 Comm: getfattr Tainted: G W 7.3.0-rc3-btrfs-next-244+ #1 PREEMPT(full) [869800.193726] Tainted: [W]=WARN [869800.194502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [869800.197576] RIP: 0010:report_eb_range+0x44/0x60 [btrfs] [869800.198985] Code: 48 8b 7b 18 (...) [869800.203531] RSP: 0018:ffffce4541937d58 EFLAGS: 00010246 [869800.204609] RAX: 0000000000000000 RBX: ffff8dde054b8738 RCX: 0000000000000000 [869800.206137] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffc04c92a0 [869800.207645] RBP: 0000000000003e8f R08: 0000000000000000 R09: 3fffffffffefffff [869800.226175] R10: ffffce4541937a88 R11: 0000000000000003 R12: 000000000000656c [869800.227594] R13: ffff8dde14be800f R14: 000000000000656c R15: 0000000000000069 [869800.229097] FS: 00007f59023bb780(0000) GS:ffff8de5788ed000(0000) knlGS:0000000000000000 [869800.231137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [869800.232321] CR2: 0000558dc45e6a78 CR3: 0000000765b16004 CR4: 0000000000370ef0 [869800.233783] Call Trace: [869800.234330] <TASK> [869800.234791] read_extent_buffer+0x4d/0x100 [btrfs] [869800.235898] btrfs_listxattr+0x199/0x240 [btrfs] [869800.236912] vfs_listxattr+0x51/0 ---truncated--- | Sat 24 Oct |
| CVE-2026-98548 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing. | Sat 24 Oct |
| CVE-2026-98490 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | Sat 24 Oct |
| CVE-2026-58630 | 9.8 critical | 1.0% | microsoft, azure_app_service_for_linux | Improper access control in Azure App Service allows an unauthorized attacker to elevate privileges over a network. | 24 Oct |
| CVE-2026-64439 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: crypto: krb5 - filter out async aead implementations at alloc krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL completion callback and treat any negative return from crypto_aead_{encrypt,decrypt}() as terminal, falling through to kfree_sensitive(buffer). When the encrypt_name resolves to an async AEAD instance the request returns -EINPROGRESS, the buffer is freed while the backend's worker still holds a pointer, and the worker dereferences the freed slab on completion. KASAN report under UML+SLUB with a synthetic async aead backend bound to krb5->encrypt_name: BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7 The helpers were written synchronously, so filter the async instances out at allocation time instead of plumbing crypto_wait_req() through every call site. Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and net/ceph/crypto.c on systems with an async AEAD provider bound to the krb5 enctype name. | 24 Oct |
| CVE-2026-63808 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. | 22 Oct |
| CVE-2026-63924 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. | 22 Oct |
| CVE-2026-63887 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) | 22 Oct |
| CVE-2026-63886 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this. | 22 Oct |
| CVE-2026-43465 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | 21 Oct |
| CVE-2026-43414 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Completely fix fcport double free In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free(). When an error happens, this function is called by qla2x00_sp_release(), when kref_put() releases the first and the last reference. qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport(). Doing it one more time after kref_put() is a bad idea. | 21 Oct |
| CVE-2026-43185 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32) | 21 Oct |
| CVE-2026-43125 | 9.8 critical | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow. | 21 Oct |
| CVE-2025-68359 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free of qgroup record after failure to add delayed ref head In the previous code it was possible to incur into a double kfree() scenario when calling add_delayed_ref_head(). This could happen if the record was reported to already exist in the btrfs_qgroup_trace_extent_nolock() call, but then there was an error later on add_delayed_ref_head(). In this case, since add_delayed_ref_head() returned an error, the caller went to free the record. Since add_delayed_ref_head() couldn't set this kfree'd pointer to NULL, then kfree() would have acted on a non-NULL 'record' object which was pointing to memory already freed by the callee. The problem comes from the fact that the responsibility to kfree the object is on both the caller and the callee at the same time. Hence, the fix for this is to shift the ownership of the 'qrecord' object out of the add_delayed_ref_head(). That is, we will never attempt to kfree() the given object inside of this function, and will expect the caller to act on the 'qrecord' object on its own. The only exception where the 'qrecord' object cannot be kfree'd is if it was inserted into the tracing logic, for which we already have the 'qrecord_inserted_ret' boolean to account for this. Hence, the caller has to kfree the object only if add_delayed_ref_head() reports not to have inserted it on the tracing logic. As a side-effect of the above, we must guarantee that 'qrecord_inserted_ret' is properly initialized at the start of the function, not at the end, and then set when an actual insert happens. This way we avoid 'qrecord_inserted_ret' having an invalid value on an early exit. The documentation from the add_delayed_ref_head() has also been updated to reflect on the exact ownership of the 'qrecord' object. | 21 Oct |
| CVE-2026-90104 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | 21 Oct |
| CVE-2026-90042 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | 21 Oct |
| CVE-2026-89972 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. | 21 Oct |
| CVE-2026-89788 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix tree connection use-after-free in smb2_tree_connect() ksmbd_tree_conn_connect() publishes a new tree connection in sess->tree_conns with a single reference and returns its pointer to smb2_tree_connect(). The handler continues to initialize the object and build the response after publication. A concurrent session logoff can erase the connection and drop that reference, freeing the object while the handler still uses it. BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90 smb2_tree_connect (fs/smb/server/smb2pdu.c:2872) handle_ksmbd_work process_one_work worker_thread kthread After xa_store() succeeds, take a second reference before releasing tree_conns_lock. The original reference belongs to the xarray entry and the second belongs to the creating smb2_tree_connect() handler. Keep the references balanced in every path: - On normal exit or an error after publication, smb2_tree_connect() drops its creator reference. Error cleanup also calls ksmbd_tree_conn_disconnect(), which drops the xarray reference only if it removes the exact entry. - SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop its xarray reference. The request's existing lookup reference remains owned by the request and is released by the existing cleanup. - Session LOGOFF removes each entry and drops its xarray reference. If it wins the race, later cleanup sees that the entry is gone and does not drop that reference again. To enforce this ownership, claim the disconnected state and erase the exact entry atomically under tree_conns_lock. This guarantees one drop for the xarray reference and one drop by each in-flight user, regardless of which teardown path wins. If logoff removes the entry before initialization completes, fail the connect instead of marking the detached object TREE_CONNECTED. | 21 Oct |
| CVE-2026-89686 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix BUG_ON in nfsd4_alloc_layout_stateid on racing delegation revoke nfsd4_alloc_layout_stateid reads fp->fi_deleg_file without holding fi_lock when the parent stateid is a delegation. A concurrent delegation revoke via the laundromat can clear fi_deleg_file under fi_lock, causing nfsd_file_get() to return NULL and triggering the BUG_ON. This race is client-reachable: two NFS clients can trigger it by having one hold a delegation while another opens the same file to force a recall. When the first client doesn't respond to the recall, the laundromat revokes it. A concurrent LAYOUTGET from any client using the delegation stateid hits the race window. Fix this by taking fi_lock around the fi_deleg_file read in the SC_TYPE_DELEG path, matching the locking discipline of the find_any_file() arm, and replacing the BUG_ON with a graceful error return that cleans up the partially-initialized layout stateid. | 21 Oct |
| CVE-2026-89654 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix UAF in check_new_map() on session freed during unlock check_new_map() iterates mdsc->sessions[] and for each active session drops mdsc->mutex to perform per-session operations. The forced-close path (rank removed from map) correctly takes a reference on s via ceph_get_mds_session() before releasing mdsc->mutex, but three other paths do not: Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex) Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s) Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex) Without the extra reference, another thread can acquire mdsc->mutex during the unlock window, call __unregister_session() which drops the last reference on s, and free it. The original thread then accesses freed memory via s->s_mutex. Fix by adding ceph_get_mds_session(s) before each mutex_unlock and ceph_put_mds_session(s) after the corresponding mutex_lock, matching the pattern already used in the forced-close path. Race timeline (Path A): Thread A (check_new_map) Thread B (another map update holds mdsc->mutex or session teardown) -------------------------- -------------------------- s = mdsc->sessions[i] (refcount == 1, held only by sessions[] array) mutex_unlock(&mdsc->mutex) ---> acquires mdsc->mutex __unregister_session(mdsc, s) sessions[i] = NULL ceph_put_mds_session(s) refcount: 1 -> 0 kfree(s) <--- freed! mutex_lock(&s->s_mutex) UAF on freed s->s_mutex | 21 Oct |
| CVE-2026-89526 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path. | 21 Oct |
| CVE-2026-89492 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). | 21 Oct |
| CVE-2026-80980 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: stop killed, freed and out_of_sync sharing a byte The three connection state flags are single-bit bitfields, so they occupy one byte of struct smc_connection and every store to one is a read-modify-write of the other two: u8 killed : 1; u8 freed : 1; u8 out_of_sync : 1; They are not written under a common lock. smc_cdc_msg_validate() sets out_of_sync from the receive tasklet, while smc_conn_kill() sets killed from process context under lock_sock(), and the receive path does not defer to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only bh_lock_sock(). Give each flag its own byte so a store no longer touches its neighbours. All readers test them as booleans and are unchanged. struct smc_connection grows by two bytes. | 21 Oct |
| CVE-2026-80668 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. | 21 Oct |
| CVE-2026-80634 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ]. | 21 Oct |
| CVE-2026-74752 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate cookie AUTH state before use When cookie authentication is disabled, COOKIE_ECHO restores fixed-size AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM length, HMAC list, or CHUNKS list can then reach association consumers with lengths or identifiers that were never validated against the local backing arrays. A forged RANDOM length can cause out-of-bounds reads during key-vector construction. A forged HMAC identifier also caused a 32-byte write past a zero-length AUTH chunk, providing a primitive for a local privilege escalation chain. Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie trust boundary before copying them into the association. Reject invalid types, malformed lengths, unsupported HMAC identifiers, HMAC lists without SHA1, and forbidden chunk ids. | 21 Oct |
| CVE-2026-74723 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | 21 Oct |
| CVE-2026-74350 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | 21 Oct |
| CVE-2026-74269 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | 21 Oct |
| CVE-2026-72494 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <[email protected]> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose. | 21 Oct |
| CVE-2026-72398 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk->chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer. | 21 Oct |
| CVE-2026-72366 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_create_write_req() to handle async cache object creation netfs_create_write_req() will skip caching if the fscache cookie is disabled, but this is a problem because async cache object creation might not have got far enough yet that has been enabled - thereby causing the call to fscache_begin_write_operation() to be skipped. Fix this by removing the checks on the cookie and delegating this to fscache_begin_write_operation(). | 21 Oct |
| CVE-2026-72200 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: detect mapping-pairs LCN accumulator overflow The NTFS mapping-pairs parser accumulates relative LCN deltas in a signed integer. A corrupted attribute can drive that addition past the representable range. One corrupt runlist shape sets the accumulated LCN to S64_MAX and then adds a delta of 1 in the next mapping-pairs entry. Signed overflow is undefined and can turn an invalid runlist into a different set of physical clusters. Check the LCN addition for overflow before storing the next run. | 21 Oct |
| CVE-2026-72130 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into the rval[] flexible-array tail, so the minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its existing variable-length guard in nvmet_auth_challenge(). This is reachable only when in-band DH-HMAC-CHAP authentication is configured on the target. | 21 Oct |
| CVE-2026-72098 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | 21 Oct |
| CVE-2026-63979 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | 21 Oct |
| CVE-2026-63857 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed. | 21 Oct |
| CVE-2026-63825 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gcov: use atomic counter updates to fix concurrent access crashes GCC's GCOV instrumentation can merge global branch counters with loop induction variables as an optimization. In inflate_fast(), the inner copy loops get transformed so that the GCOV counter value is loaded multiple times to compute the loop base address, start index, and end bound. Since GCOV counters are global (not per-CPU), concurrent execution on different CPUs causes the counter to change between loads, producing inconsistent values and out-of-bounds memory writes. The crash manifests during IPComp (IP Payload Compression) processing when inflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_input At the crash point, the compiler generated three loads from the same global GCOV counter (__gcov0.inflate_fast+216) to compute base, start, and end for an indexed loop. Another CPU modified the counter between loads, making the values inconsistent - the write went 3.4 MB past a 65 KB buffer. Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level in the top-level Makefile, guarded by a try-run compile test. The test compiles a minimal program with and without -fprofile-update=prefer-atomic using the full KBUILD_CFLAGS, then compares undefined symbols in the resulting object files. If prefer-atomic introduces new undefined references (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relax on arm64 with outline-atomics), the flag is not added -- the kernel does not link against libatomic. On architectures where GCC inlines 64-bit atomic counter updates (x86_64, s390, ...) the test passes and the flag is enabled, preventing the compiler from merging counters with loop induction variables and fixing the observed concurrent-access crash. On architectures where the flag would introduce libatomic dependencies, it is silently omitted and behaviour is no worse than before this patch. Move the CFLAGS_GCOV block from its original position (before the arch Makefile include) to after the core KBUILD_CFLAGS assignments but before the scripts/Makefile.gcc-plugins include. This placement ensures the try-run test sees arch-specific flags (-m32, -march=, -mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) that would break the test on clean builds when plugin shared objects do not yet exist. | 21 Oct |
| CVE-2026-72084 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | 19 Oct |
| CVE-2026-72083 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. | 19 Oct |
| CVE-2026-72069 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: locking/rt: Fix the incorrect RCU protection in rt_spin_unlock() rt_spin_unlock() releases the RCU protection before unlocking the lock. That opens the door for the following UAF scenario: T1 T2 spin_lock(&p->lock); rcu_read_lock(); invalidate(p); p = rcu_dereference(ptr); rcu_assign_pointer(ptr, NULL); if (!p) return; spin_unlock(&p->lock); spin_lock(&p->lock) lock(&lock->lock); rcu_read_lock(); kfree_rcu(p); rcu_read_unlock(); .... spin_unlock(&p->lock) rcu_read_unlock(); // Ends grace period rcu_do_batch() kfree(p); UAF -> rt_mutex_cmpxchg_release(&lock->lock...) Regular spinlocks keep preemption disabled accross the unlock operation, which provides full RCU protection, but the RT substitution fails to resemble that. Same applies for the rwlock substitution. Move the rcu_read_unlock() invocation past the unlock operations to match the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but that's harmless as the caller needs to hold RCU read lock across the lock operation. The migrate_enable() call stays before the unlock operation because there is no per CPU operation in the unlock path which would require migration to be kept disabled. | 19 Oct |
| CVE-2026-72065 | 9.8 critical | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: mana: Validate the packet length reported by the NIC Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. | 19 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-30. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.