Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-6651 | 1.9 low | 0.00% | no CPE yet | A security flaw has been discovered in erponline.xyz ERP Online up to 4.0.0. This vulnerability affects unknown code of the component Inventory Edit Item Page. The manipulation of the argument Item Name results in cross site scripting. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | Mon 26 Oct |
| CVE-2026-4972 | 1.9 low | 0.00% | no CPE yet | A security vulnerability has been detected in code-projects Online Reviewer System up to 1.0. Affected is an unknown function of the file /system/system/students/assessments/databank/btn_functions.php. Such manipulation of the argument Description leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. | 26 Oct |
| CVE-2026-15532 | 1.9 low | 0.00% | no CPE yet | A vulnerability was identified in SourceCodester Online Book Store System 1.0. This issue affects some unknown processing of the component User Management Module. Such manipulation of the argument Name/Username leads to cross site scripting. The attack can be executed remotely. The exploit is publicly available and might be used. | 24 Oct |
| CVE-2025-14991 | 1.9 low | 0.00% | campcodes, complete_online_beauty_parlor_management_system | A weakness has been identified in Campcodes Complete Online Beauty Parlor Management System 1.0. The affected element is an unknown function of the file /admin/bwdates-reports-details.php. Executing a manipulation of the argument fromdate can lead to cross site scripting. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. | 19 Oct |
| CVE-2025-13412 | 1.9 low | 0.00% | campcodes, retro_basketball_shoes_online_store | A vulnerability was determined in Campcodes Retro Basketball Shoes Online Store 1.0. Affected by this issue is some unknown functionality of the file /admin/admin_running.php. Executing a manipulation of the argument product_name can lead to cross site scripting. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. | 18 Oct |
| CVE-2025-13484 | 1.9 low | 0.00% | campcodes, online_beauty_parlor_management_system | A vulnerability was identified in Campcodes Complete Online Beauty Parlor Management System 1.0. This vulnerability affects unknown code of the file /admin/customer-list.php. The manipulation of the argument Name leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used. | 18 Oct |
| CVE-2025-11333 | 1.9 low | 0.00% | no CPE yet | A vulnerability was identified in langleyfcu Online Banking System up to 57437e6400ce0ae240e692c24e6346b8d0c17d7a. This impacts an unknown function of the file /customer_add_action.php of the component Add Customer Page. The manipulation of the argument First Name leads to cross site scripting. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. | 9 Oct |
| CVE-2026-7085 | 1.3 low | 0.00% | no CPE yet | A vulnerability was determined in HBAI-Ltd Toonflow-app up to 1.1.1. This vulnerability affects the function z.url of the file src/routes/setting/about/downloadApp.ts of the component downloadApp Endpoint. This manipulation of the argument url causes path traversal. It is possible to initiate the attack remotely. The attack is considered to have high complexity. It is stated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. The real existence of this vulnerability is still doubted at the moment. The vendor explains in a reply to the issue report, that "[t]his interface is used for online updates, and the update URL has been statically compiled in the official code repository. Unless users modify the code, the requested address will be the official source address." | Mon 26 Oct |
| CVE-2026-18591 | 0.9 low | 0.00% | no CPE yet | A vulnerability was identified in Meesho Online Shopping App up to 20260607 on Android. Affected by this vulnerability is an unknown functionality of the component com.meesho.supply. Such manipulation of the argument user_id/phone number/email address/name leads to cleartext storage of sensitive information. The attack can be executed directly on the physical device. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. | 23 Oct |
| CVE-2026-99160 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not show buffer_meta for CPUs without a buffer The per_cpu/cpuN/buffer_meta files are created for every possible CPU, but buffer->buffers[cpu] is only allocated once that CPU comes online. Reading the file of a CPU that never came online dereferences a NULL cpu_buffer in rbm_start(). Fail the open with -ENODEV when the CPU has no buffer, as the other per CPU ring buffer interfaces do. | Fri 30 Oct |
| CVE-2026-93208 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: kasan: fix cache shrink race with CPU hotplug kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on all online CPUs. Each callback moves objects belonging to the cache from cpu_quarantine to the CPU's shrink_qlist, where they can later be freed from task context. kmem_cache_destroy() invokes the quarantine removal path while holding cpus_read_lock(), but kmem_cache_shrink() does not. The latter can therefore race with CPU offlining as follows: kmem_cache_shrink() CPU hotplug ------------------- ----------- on_each_cpu() CPU1 moves objects to CPU1's shrink_qlist on_each_cpu() returns CPU1 goes offline kasan_cpu_offline() drains cpu_quarantine leaves shrink_qlist untouched for_each_online_cpu() skips CPU1 The objects left on CPU1's shrink_qlist are not returned to the slab allocator. This may prevent kmem_cache_shrink() from releasing slabs that would otherwise become empty. If CPU1 remains offline, a later kmem_cache_destroy() also skips the list and can report that the cache still contains objects. An intermittent occurrence was observed with a virtio-9p filesystem. The mount and umount commands both returned 0, but the kernel logged the following during the userspace-triggered teardown: [ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown() [ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376 [ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104 [ 2994.382591][ T111] p9_fcall_init+0x201/0x400 [ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700 [ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0 [ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50 [ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0 [ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360 [ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0 [ 2994.383910][ T111] vfs_statx+0xd7/0x170 [ 2994.384062][ T111] vfs_fstatat+0x45/0x80 [ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0 [ 2994.384386][ T111] do_syscall_64+0x115/0x6a0 [ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111 [ 2994.405655][ T111] Call Trace: [ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0 [ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0 [ 2994.407210][ T111] v9fs_session_close+0x3c/0x260 [ 2994.407409][ T111] v9fs_kill_super+0x48/0x90 [ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160 [ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0 Thus, a successful umount left objects in the 9p fcall cache and prevented the cache from being destroyed cleanly. Per-CPU shrink_qlist storage exists for every possible CPU, and each list is protected by its own raw spinlock. Iterate over possible CPUs so that a list populated before its CPU went offline is drained as well. for_each_possible_cpu() can do more work than for_each_online_cpu(), but this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is limited to cache shrink and cache destruction paths and does not affect the normal allocation/free fast path. It adds one raw-spinlock-protected scan of each possible CPU's shrink list. These lists are normally empty; a non-empty list is traversed to remove objects belonging to the cache being shrunk or destroyed. | Fri 30 Oct |
| CVE-2026-93172 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed allocation check for pgdat->per_cpu_nodestats, which results in a NULL deref when we offset into the per-cpu area. Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing at boot_nodestats so a later online can retry the allocation. hotadd_init_pgdat() returns NULL on failure, which __try_online_node() already maps to -ENOMEM. On failure nothing needs to be unwound: - the node is never marked online - per_cpu_nodestats is left pointing at boot_nodestats - __add_memory_resource() cleans up pending memblock resources - later online attempts retry the per_cpu_nodestats allocation | Fri 30 Oct |
| CVE-2024-50135 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already. | Fri 30 Oct |
| CVE-2023-53712 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ARM: 9317/1: kexec: Make smp stop calls asynchronous If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8039c ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interrupt Make the smp call for machine_crash_nonpanic_core() asynchronous. | Wed 28 Oct |
| CVE-2026-99168 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Check per-CPU register page before mmap Register-page setup is optional for each CPU. If allocation or registration fails, mshv_vtl_configure_reg_page() warns and leaves that CPU's reg_page NULL, but initial context setup continues successfully. Meanwhile, successful setup on another CPU sets the global mshv_has_reg_page flag. mshv_vtl_fault() checks this global flag before selecting the requested CPU's register page. With mixed setup results across online CPUs, the check passes even for a CPU with no register page, reaching get_page(NULL) when userspace faults in that mapping. Check the selected per-CPU register page before taking its reference and return VM_FAULT_SIGBUS if it is absent. | Wed 28 Oct |
| CVE-2026-99085 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler A CPU going down has to empty its own rq. Its hotplug thread waits in sched_cpu_wait_empty() until nothing else is left, and the only thing that wakes it is balance_push(), which runs from __schedule() on the dying CPU and pushes off the migratable tasks the CPU picks. sched_ext breaks this. A task sitting on a user DSQ or held by the BPF scheduler is still counted on its rq, but an inactive CPU no longer calls ops.dispatch() and can't pull the task back. The dying CPU goes idle with the task still counted, and one of two things happens: - Another CPU consumes the task. The rq empties without a __schedule() on the dying CPU, so the hotplug thread is never woken and cpu_down() hangs holding cpu_hotplug_lock. - The task is affine only to the dying CPU. Nothing can move it, and the offline stalls until the watchdog ejects the BPF scheduler. When the rq goes offline, re-enqueue every task on it that isn't already on the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the dying CPU itself picks the tasks and balance_push() pushes them off, the same as for the other sched classes. From then on no sched_ext path on another CPU can pull a task off the rq. ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU hotplug then waits for an RCU grace period before taking the rq offline. A BPF-held task affine only to the dying CPU and preempted inside an RCU read-side critical section would block that grace period, and the rq would never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps running until the rq goes offline. Only the dying CPU's own hotplug thread clears the flag during teardown, and task_can_run_on_remote_rq() still keeps other rqs' tasks off the CPU. | 23 Oct |
| CVE-2026-99065 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Handle cpu hotplug race in guarantee_active_cpus() With commit 2125c0034c5d ("cgroup/cpuset: Make cpuset hotplug processing synchronous"), the cpuset hotplug operation becomes synchronous. That commit also removes the code that handles race between cpuset_hotplug_work and cpu hotplug notifier with the assumption that race is now gone. Later commit 7a0aabd9ce69 ("cgroup/cpuset: Always use cpu_active_mask") updates the cpuset code to always use cpu_active_mask instead of cpu_online_mask in some places including guarantee_online_cpus() which is renamed to guarantee_active_cpus() in that commit. In the case of CPU offline operation, cpu_active_mask is updated first in sched_cpu_deactivate() to remove the offline CPU before cpuset_handle_hotplug() is called to update the effective_cpus of the affected cpusets. The cpu_online_mask is updated after that near the end of the offline operation to remove the offline CPU. As a result, the race comes back and the top cpuset may not have any active CPU leading to NULL pointer dereference during the race window when guarantee_active_cpus() is called after cpu_active_mask is updated to remove the CPU to be torn down but before cpuset_handle_hotplug() is able to properly update the effective_cpus of the top cpuset. Fix this by adding back the NULL cs check to avoid this problem. | 23 Oct |
| CVE-2026-93181 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering. | 21 Oct |
| CVE-2025-40227 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: dealloc commit test ctx always The damon_ctx for testing online DAMON parameters commit inputs is deallocated only when the test fails. This means memory is leaked for every successful online DAMON parameters commit. Fix the leak by always deallocating it. | 19 Oct |
| CVE-2025-40228 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: catch commit test ctx alloc failure Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation". DAMON sysfs interface dynamically allocates and uses a damon_ctx object for testing if given inputs for online DAMON parameters update is valid. The object is being used without an allocation failure check, and leaked when the test succeeds. Fix the two bugs. This patch (of 2): The damon_ctx for testing online DAMON parameters commit inputs is used without its allocation failure check. This could result in an invalid memory access. Fix it by directly returning an error when the allocation failed. | 19 Oct |
| CVE-2026-98558 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown. | 19 Oct |
| CVE-2026-98445 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away. | 19 Oct |
| CVE-2026-98302 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | 19 Oct |
| CVE-2026-98088 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | 19 Oct |
| CVE-2026-97905 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus. | 19 Oct |
| CVE-2026-97552 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfs: initialise error in xfs_defer_finish_one() xfs_defer_finish_one() declares error without an initialiser and only assigns it inside the loop over dfp->dfp_work. When that list is empty the loop body never runs, control falls through to the "Done with the dfp, free it" path, and the function returns an indeterminate value. An item-less pending item reaches this through xfs_defer_add_barrier(), which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel. xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a non-zero stack value turns a successful barrier into a SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct result: reaching the free path means the item loop drained without a non-zero error. | 19 Oct |
| CVE-2026-97526 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for CPU add and delete and create the necessary per-CPU data infrastructure during CPU hotplug add processing. Same for CPU hotplug remove. This is done when the CPU is offline to ensure the data structures are available when CPU is made online and tasks are scheduled on it. [[email protected]: fixup error path in pai_init()] | 19 Oct |
| CVE-2026-93197 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: memcg: move LRU size accounting on reparenting instead of copying it When a memory cgroup is offlined its LRU folios are reparented to the parent. lruvec_reparent_lru() splices the child's lists into the parent's and credits the parent with the child's per-zone lru_zone_size[], but never clears the child's copy, so the size is copied rather than moved. lru_gen_reparent_memcg() does the same for MGLRU. The parent is left correct, credited with exactly the folios it took over. The stale value sits on the child and nothing will correct it: folio->memcg_data now resolves to the parent, so every later update_lru_size() for those folios goes there. Dying cgroups are not freed immediately and mem_cgroup_iter() still walks them, so shrink_lruvec() keeps being called on them. get_scan_count() reads the phantom counter through lruvec_lru_size() and the scan loop then grinds through nr[] in SWAP_CLUSTER_MAX steps against an empty list, for as long as the dead cgroup lives. Under MGLRU the MGLRU scanner runs instead, but count_shadow_nodes() sums all of NR_LRU_LISTS through lruvec_lru_size() and over-budgets the shadow node limit just the same. On one 251 GiB host a sweep of every mz->lru_zone_size[] found 380 counters describing folios on no list at all: 124777314 pages, 476 GiB, 1.89x the machine's RAM, across 57 cgroups. All were on memcgs with CSS_DYING set and CSS_ONLINE clear, and parent/child pairs reported byte-identical sizes. LRU_UNEVICTABLE needs its size moved too. Its list is deliberately not spliced because lruvec_init() poisons the head - the unevictable LRU is imaginary and folios are never threaded on it - but the size is kept by lruvec_add_folio()/lruvec_del_folio() and those folios account to the parent from here on. This depends on commit bf4ade7dbd76 ("memcg: keep folio's objcg same as its node") and must not be backported ahead of it. Without that invariant a folio's objcg can belong to another node, so a folio already spliced onto the parent's list can still resolve to the child's lruvec until the objcg's node is reparented in a later iteration of memcg_reparent_objcgs(); clearing the child's counter early then lets lruvec_del_folio() underflow it and trip the WARN_ONCE()/VM_BUG_ON() in mem_cgroup_update_lru_size(). | 19 Oct |
| CVE-2026-90178 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix core_data leak on CPUs without PTS pdata->core_data is allocated in init_temp_data() when the first core temp_data of a package is created, but it is only released from destroy_temp_data(), and only in the branch that handles the package temp_data. Package temp_data is created solely when the CPU supports X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL. coretemp_cpu_offline() then skips the removal of the package interface, destroy_temp_data() is never called for package data, and the array is still allocated when coretemp_device_remove() frees the platform data that pointed at it. Release the array in coretemp_device_remove(). destroy_temp_data() sets pdata->core_data to NULL when it frees it, so the added kfree() is a no-op on CPUs that do have PTS. Tested on an Intel Core i5-1135G7. The driver was instrumented to log every allocation and release of pdata->core_data, and the PTS check in coretemp_cpu_online() was patched out to emulate a CPU without package thermal support. Without this change the array was allocated and never released, and coretemp_device_remove() still saw a non-NULL pointer. With it the array is released and the pointer accounting balances. On an unmodified build the release still happens via the package temp_data and the added kfree() sees NULL, with no slab warnings over repeated module load and unload cycles. | 19 Oct |
| CVE-2026-89981 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: arm64: Don't read GMID_EL1 when MTE is disabled __cpuinfo_store_cpu() gates the GMID_EL1 read on the raw ID_AA64PFR1_EL1, so it reads the register even when the kernel has disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5 in that case, and pKVM injects an UNDEF the host cannot handle: Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP pc : __cpuinfo_store_cpu+0xf4/0x264 Kernel panic - not syncing: Attempted to kill the idle task! Only pKVM reaches it, and only after a CPU is offlined and brought back online: its CPU_ON relay sets the host HCR before the CPU enters EL1, while plain nVHE sets it at CPUHP_AP_KVM_ONLINE. Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line override applied, and on CONFIG_ARM64_MTE, which no register reflects. The boot CPU stores its registers before init_cpu_features() strips an unsafe override, so clamp against the hardware value here too. | 19 Oct |
| CVE-2026-89796 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid infinite kdamond_merge_regions() internal loop Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races", v1.1. Sashiko found a few issues in DAMON that could cause infinite loop, NULL dereference and monitoring results degradation. The first two sounds scary but the infinite loop happens only under unreasonable user setup. The NULL dereference is only in a unit test. Monitoring results degradation is trivial since it is only best-effort, and those happens from only unlikely races. Still those are bugs that better to fix if possible. Fix those. This patch (of 6): Due to online parameter update like events, the number of DAMON regions could be higher than the user-set upper limit. kdamond_merge_regions() repeats merge regions until the number meets the limit, while doubling the merge threshold up to the theoretical maximum threshold. It is tried only up to the theoretical maximum threshold because even the aggressive merging can fail from reducing the number of regions under the user-defined upper limit. For example, there could be many user-defined non-contiguous regions that cannot be merged. The threshold based loop break condition is evaluated by comparing the threshold for the next merging try against the theoretical maximum threshold. If max_thres is larger than UINT_MAX / 2, doubling the threshold could make it overflow, and bypass the loop break condition. In the case, if the number of regions cannot be reduced under the upper limit like explained above, the loop will run infinitely. Prevent the case by doing the break condition check before doubling the threshold. Also, prevent the threshold exceeding the maximum threshold, as it could overflow and apply the wrong merge threshold. This issue is unlikely to occur in real world, since having the max_thres higher than UINT_MAX / 2 require unrealistically large aggregation intervals compared to the sampling interval. Also, it requires an unrealistically large number of uncontiguous regions setup. Nonetheless, the consequence is bad and the fix is simple. The issue was discovered [1] by Sashiko. | 19 Oct |
| CVE-2026-89460 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks The command 'perf stat -e cycles -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the allocation of struct cpu_cf_events at first event initialization. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online create an event for CPUs 0,2-X. Since the events are created with task-context, the scheduler will eventually schedule the program on CPU1. This CPU has not created and initialized any per CPU event infrastructure as that CPU was not online at the time of the perf invocation. Thus when the scheduler runs stress-ng on CPU1, the function cpumf_pmu_add() refers to a NULL pointer: struct cpu_cf_events *cpuhw = this_cpu_cfhw(); This function call is invoked after the task stress-ng has been made runnable on CPU1. And this_cpu_cfhw() returns NULL. The result is a panic: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 .... Krnl PSW : 0404d00180000000 000003ef8291fd0c (cpumf_pmu_add+0x3c/0x80) .... Call Trace: [<000003ef8291fd0c>] cpumf_pmu_add+0x3c/0x80 [<000003ef82bb5e3e>] event_sched_in+0xae/0x190 [<000003ef82bb60d6>] merge_sched_in+0x1b6/0x390 [<000003ef82bb65b8>] visit_groups_merge.constprop.0.isra.0+0x308/0x5b0 [<000003ef82bb689a>] pmu_groups_sched_in+0x3a/0x50 [<000003ef82bb6a30>] ctx_sched_in+0x180/0x260 [<000003ef82bb780c>] perf_event_context_sched_in+0x11c/0x2d0 [<000003ef82bb79ee>] __perf_event_task_sched_in+0x2e/0xc0 [<000003ef82994834>] finish_task_switch.isra.0+0x1a4/0x250 .... Last Breaking-Event-Address: [<000003ef8291f1d8>] this_cpu_cfhw+0x38/0x40 The issue arises only in per-task context when the CPUMF facility is used and the scheduler picks a random CPU for such a process to run on. The scheduler enables the CPUMF infrastructure via PMU callback functions pmu::add() and pmu::del(). Introduce a CPU hotplug prepare/dead callback pair which creates and removes the per CPU counter data while the CPU is offline. Count the users which track every CPU (cpu == -1), that is perf_event_open() events with task context and /dev/hwctr device sessions, in the new counter cpu_cf_root::tskcnt, protected by pmc_reserve_mutex. This ensures the infrastructure is available when new CPU is selected to run the per-task context process. In cpum_cf_free_root() and cpum_cf_free_cpu() ensure the reference pointer to data structures is set to NULL before the data is freed to prevent interrupt handlers to access stale data. [[email protected]: change commit message] | 19 Oct |
| CVE-2026-89457 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Guard sysfs discipline callbacks against unallocated private data Several sysfs show/store handlers call a discipline callback that dereferences device->private, either directly or through the DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline is assigned before check_device() allocates device->private, so an unprivileged read of one of these world-readable attributes in that window dereferences a NULL pointer and panics. Guard the dereference inside each callback that actually touches device->private. | 19 Oct |
| CVE-2023-54271 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init blk-iocost sometimes causes the following crash: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... RIP: 0010:_raw_spin_lock+0x17/0x30 Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00 RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001 RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0 RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003 R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000 R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600 FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0 Call Trace: <TASK> ioc_weight_write+0x13d/0x410 cgroup_file_write+0x7a/0x130 kernfs_fop_write_iter+0xf5/0x170 vfs_write+0x298/0x370 ksys_write+0x5f/0xb0 __x64_sys_write+0x1b/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This happens because iocg->ioc is NULL. The field is initialized by ioc_pd_init() and never cleared. The NULL deref is caused by blkcg_activate_policy() installing blkg_policy_data before initializing it. blkcg_activate_policy() was doing the following: 1. Allocate pd's for all existing blkg's and install them in blkg->pd[]. 2. Initialize all pd's. 3. Online all pd's. blkcg_activate_policy() only grabs the queue_lock and may release and re-acquire the lock as allocation may need to sleep. ioc_weight_write() grabs blkcg->lock and iterates all its blkg's. The two can race and if ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a pd which is not initialized yet, leading to crash. The crash can be reproduced with the following script: #!/bin/bash echo +io > /sys/fs/cgroup/cgroup.subtree_control systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct echo 100 > /sys/fs/cgroup/system.slice/io.weight bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" & sleep .2 echo 100 > /sys/fs/cgroup/system.slice/io.weight with the following patch applied: > diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c > index fc49be622e05..38d671d5e10c 100644 > --- a/block/blk-cgroup.c > +++ b/block/blk-cgroup.c > @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol) > pd->online = false; > } > > + if (system_state == SYSTEM_RUNNING) { > + spin_unlock_irq(&q->queue_lock); > + ssleep(1); > + spin_lock_irq(&q->queue_lock); > + } > + > /* all allocated, init in the same order */ > if (pol->pd_init_fn) > list_for_each_entry_reverse(blkg, &q->blkg_list, q_node) I don't see a reason why all pd's should be allocated, initialized and onlined together. The only ordering requirement is that parent blkgs to be initialized and onlined before children, which is guaranteed from the walking order. Let's fix the bug by allocating, initializing and onlining pd for each blkg and holding blkcg->lock over initialization and onlining. This ensures that an installed blkg is always fully initialized and onlined removing the the race window. | 15 Oct |
584 of 584 · Previous
Download these 584 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.