Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-43969 | 2.1 low | 0.00% | ninenines, cowlib | Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in ninenines cowlib allows HTTP request splitting and cookie smuggling via unvalidated cookie name and value fields. cow_cookie:cookie/1 in cowlib builds a client-side Cookie: request header from a list of name-value pairs without validating either field. An attacker who controls the cookie names or values passed to this function can inject ;, ,, CR, LF, or TAB characters into the serialized header. This enables two classes of attack: cookie smuggling within a single header (e.g. injecting ; admin=1 to introduce a phantom cookie that the receiving server treats as authentic) and HTTP request header splitting (injecting CRLF to append arbitrary headers or smuggle a complete second request against a shared upstream proxy). The decoder side (parse_cookie_name/1, parse_cookie_value/1) and setcookie/3 already validate and reject these characters; the encoder alone is missing the check. This issue affects cowlib: from 2.9.0 before 2.21.0. | Mon 26 Oct |
| CVE-2026-112880 | 2.1 low | 0.00% | no CPE yet | Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in hackney_http_connect in benoitc hackney allows HTTP Request Splitting via the value a proxy_auth_fun callback returns. After a 407 response from an HTTP CONNECT proxy, hackney_http_connect:handle_proxy_auth/11 calls the caller's proxy_auth_fun with the status code and the response headers and writes the returned binary into the Proxy-Authorization line of the CONNECT retry without checking it. A CR, LF or NUL byte in that value adds header lines to the request sent to the proxy. The value is attacker-influenced when the callback derives it from untrusted data, for example from the proxy's challenge headers. Other caller-supplied values on the CONNECT path, such as the target host and the request headers, were already checked for control bytes. This issue affects hackney: from 2.0.0 before 4.9.0. | Mon 26 Oct |
| CVE-2026-12772 | 2.1 low | 0.00% | litellm | A security flaw has been discovered in BerriAI litellm up to 1.82.2. This impacts the function authenticate_user of the file litellm/proxy/auth/login_utils.py of the component PROXY_ADMIN database API Key Generator. Performing a manipulation results in session expiration. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure. | 25 Oct |
| CVE-2026-12774 | 2.1 low | 0.00% | litellm | A security vulnerability has been detected in BerriAI litellm up to 1.82.2. Affected by this vulnerability is the function _execute_with_mcp_client of the file litellm/proxy/_experimental/mcp_server/rest_endpoints.py of the component MCP Server Connection Testing. The manipulation leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. | 25 Oct |
| CVE-2026-12798 | 2.1 low | 0.00% | litellm | A weakness has been identified in BerriAI litellm up to 1.82.2. Affected by this vulnerability is the function load_openapi_spec_async of the file litellm/proxy/_experimental/mcp_server/openapi_to_mcp_generator.py of the component MCP OpenAPI Spec Loader. This manipulation of the argument spec_path causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure. | 25 Oct |
| CVE-2026-12799 | 2.1 low | 0.00% | litellm | A security vulnerability has been detected in BerriAI litellm up to 1.82.2. Affected by this issue is the function ui_view_users of the file litellm/proxy/management_endpoints/internal_user_endpoints.py of the component Incomplete Fix CVE-2025-0628. Such manipulation leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure. | 25 Oct |
| CVE-2026-16074 | 2.1 low | 0.00% | no CPE yet | A vulnerability was detected in AstrBotDevs AstrBot up to 4.25.2. This affects the function update_plugin/update_all_plugins of the file astrbot/dashboard/routes/plugin.py of the component Plugin Update Handler. The manipulation of the argument download_url/download_urls/proxy results in server-side request forgery. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 24 Oct |
| CVE-2026-64823 | 2.1 low | 0.00% | no CPE yet | Home Assistant Core before 2026.5.4 contains a cross-site scripting vulnerability in the Shelly integration's async_get_media_image() method that allows attackers controlling a Shelly device's thumb field to serve arbitrary HTML content by supplying a data URI with a text/html content type without validation against an image-only allowlist. Attackers can cause the media player proxy endpoint to serve attacker-controlled bytes with Content-Type text/html in the Home Assistant web origin, enabling theft of session tokens from local storage and authenticated calls to sensitive service endpoints including lock, alarm, and cover controls. | 24 Oct |
| CVE-2026-115364 | 2.1 low | 0.00% | no CPE yet | OpenBao before 2.6.3 contains a missing authorization check that allows attackers to stop Agent and Proxy services by omitting the X-Vault-Header. When require_request_header is enabled, attackers can send requests via server-side request forgery to /agent/v1/quit or /proxy/v1/quit to shut down these services. | 23 Oct |
| CVE-2026-112251 | 2.1 low | 0.00% | no CPE yet | A vulnerability was detected in antoinersx clawhost up to 0.0.45. This affects the function handleRequest of the file apps/clawhostgo/src/main/services/reverseProxy.ts of the component Reverse Proxy. Performing a manipulation of the argument token results in open redirect. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 19 Oct |
| CVE-2025-10471 | 2.1 low | 0.00% | zkea, zkeacms | A vulnerability was detected in ZKEACMS 4.3. Impacted is the function Proxy of the file src/ZKEACMS/Controllers/MediaController.cs. Performing manipulation of the argument url results in server-side request forgery. It is possible to initiate the attack remotely. The exploit is now public and may be used. | 19 Oct |
| CVE-2026-108572 | 2.1 low | 0.00% | no CPE yet | A security vulnerability has been detected in Casdoor up to 3.164.0/4.10.0. Affected is the function CasP3ProxyValidate of the file controllers/cas.go of the component Proxy Validation. Such manipulation of the argument pgtUrl leads to server-side request forgery. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. Upgrading to version 4.11.0 is able to address this issue. The name of the patch is 03c6c9aaa2eda5b085ce128ce0d60b34094efbd9/ada08ecd10cbf158f593dee23a8bab63efecf995. It is advisable to upgrade the affected component. | 13 Oct |
| CVE-2026-108523 | 2.1 low | 0.00% | no CPE yet | A vulnerability was determined in Studio-Saelix Sencho up to 0.94.1. This vulnerability affects unknown code of the file outboundTarget.ts of the component git-sources Browse API Endpoint. Executing a manipulation of the argument repo_url can lead to server-side request forgery. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The presence of this vulnerability remains uncertain at this time. This patch is called 79b86ddcd4aefdd6941f098e35990ab397b13c72. It is advisable to implement a patch to correct this issue. The vendor explains: "Git repository access is an intentional, privileged administrative function. Sencho explicitly supports repositories hosted on private LAN, VPC, VPN, CGNAT, and IPv6 ULA networks. The report does not demonstrate a privilege-boundary bypass or access by an unprivileged user. We therefore dispute the CVE characterization of this behavior. As defense in depth, we have nevertheless hardened repository access. Git HTTPS and SSH connections now validate and pin DNS resolution, reject loopback, link-local, multicast, selected special-use and metadata targets, disable redirects and inherited proxy routing, and retain strict SSH host-key verification." | 13 Oct |
| CVE-2026-108574 | 2.1 low | 0.00% | no CPE yet | A flaw has been found in BerriAI LiteLLM up to 1.95.0. Affected by this issue is the function ui_view_session_spend_logs of the file litellm/proxy/spend_tracking/spend_management_endpoints.py of the component Spend Tracking. Executing a manipulation of the argument session_id can lead to authorization bypass. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 1.96.0 can resolve this issue. This patch is called 722d9ffa4f6c5ae15702ab9ab2c5f6bf1688308b. The affected component should be upgraded. | 13 Oct |
| CVE-2025-13588 | 2.1 low | 0.00% | no CPE yet | A vulnerability was found in lKinderBueno Streamity Xtream IPTV Player up to 2.8. The impacted element is an unknown function of the file public/proxy.php. Performing manipulation results in server-side request forgery. The attack can be initiated remotely. The exploit has been made public and could be used. Upgrading to version 2.8.1 is sufficient to resolve this issue. The patch is named c70bfb8d36b47bfd64c5ec73917e1d9ddb97af92. It is suggested to upgrade the affected component. | 8 Oct |
| CVE-2026-12771 | 1.3 low | 0.00% | litellm | A vulnerability was identified in BerriAI litellm up to 1.82.2. This affects an unknown function of the file litellm/proxy/auth/user_api_key_auth.py of the component M2M JWT Handler. Such manipulation leads to improper authorization. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is reported as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. | 25 Oct |
| CVE-2026-116130 | unscored | 0.00% | no CPE yet | HTTP::Parser::XS versions before 0.18 for Perl truncate PATH_INFO at an encoded NUL byte in parse_http_request. The XS parser URL-decodes the request path and measures the result with strlen(), so PATH_INFO ends at the first byte decoded from %00. The pure-Perl backend is not affected. A remote attacker can send a path that a proxy or filter checks in full while the application routes on a shorter one. | Fri 30 Oct |
| CVE-2026-84747 | unscored | 0.00% | no CPE yet | Interpretation conflict in the HTTP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to bypass access control rules enforced by a front proxy. Root Cause: The method dispatch function FindMethodPropertyByURI() in bRPC's HTTP protocol splits the request path with a string splitter that skips empty fields, so paths containing empty path segments (consecutive slashes), such as //flags, /flags// and /flags//port, are dispatched to the same method as their collapsed form /flags. Per RFC 3986 these are distinct paths. A front proxy that enforces an ACL (e.g. blocking access to builtin services such as /flags) matches the collapsed form only, and therefore forwards the padded literal to the bRPC server, where it is dispatched as if it were the collapsed form. This differential allows //flags?setvalue= to reach a builtin service that /flags is not allowed to reach. Additionally, the HTTP/2 implementation never validated the :path pseudo-header, so requests without a :path, or with a :path that neither begins with '/' nor is the asterisk-form '*', contrary to RFC 9113 section 8.3.1, were not rejected. Affected Scenarios: Deployments of Apache bRPC behind a front proxy or gateway that performs access control (ACL) decisions on the literal request path, where the bRPC server accepts HTTP or HTTP/2 traffic from that proxy. In such deployments an attacker can send a path containing empty path segments to reach a resource that the front proxy intended to block. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3512 Note: After applying the fix, HTTP and HTTP/2 request paths containing empty path segments (consecutive slashes) are rejected by default, and HTTP/2 :path values that are empty or neither begin with '/' nor equal '*' are rejected. Deployments that depend on the previous lenient behavior can restore it by turning on the gflag -http_allow_empty_path_segments, which is not recommended for servers exposed to untrusted traffic. | Fri 30 Oct |
| CVE-2026-116127 | unscored | 0.00% | no CPE yet | Starlet versions before 0.33 for Perl send a body in responses to HEAD requests, corrupting the next response on a persistent or pipelined connection. The request method is not passed to the response writer, so whatever body the application returns for a HEAD request is sent. With Plack::Middleware::Head the body is empty, but an HTTP/1.1 response without a Content-Length header still gets the chunked encoding terminator. Responses with status 204 or 304 are also sent with their body. Pipelined GET and HEAD requests keep the connection open even when keep-alive is disabled, which is the default. A client or proxy reading the connection takes the extra bytes as the start of the next response, which may desynchronize a proxy that shares the connection across clients. | Fri 30 Oct |
| CVE-2026-99204 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: Protect the recovery list during debugfs reads Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] </TASK> Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.] | Fri 30 Oct |
| CVE-2026-99105 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick. | Fri 30 Oct |
| CVE-2026-98705 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. | Fri 30 Oct |
| CVE-2026-97501 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take the pinctrl mutex. This causes a gpiochip operations to need to sleep. Worse yet, the .can_sleep field in the gpiochip is not set. This causes the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check whether it can use a spinlock or needs a mutex. In this case, it ends up taking a spinlock, then calls pinctrl_gpio_direction_output(), which takes a mutex. This causes a huge warning. While this class of Mediatek hardware does not have separate clear/set registers, the pinctrl context has a spinlock that is taken whenever a register read-modify-write is done. Also, once the GPIO function is selected / muxed in, further GPIO operations do not involve pinctrl operations or state. The GPIO direction and level values do not require toggling the pinmux or any other pin config options. Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO set direction callbacks to avoid taking the pinctrl mutex. Drop the .gpio_set_direction field in mtk_pmxops to signal we are no longer using the pinctrl GPIO layer for setting the direction. | Fri 30 Oct |
| CVE-2026-90106 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directly, but that can result in torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address. | Fri 30 Oct |
| CVE-2026-72336 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | Fri 30 Oct |
| CVE-2024-56588 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping. | Fri 30 Oct |
| CVE-2026-118576 | unscored | 0.00% | drupal, stage file proxy | Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal Stage File Proxy allows Cross-Site Scripting (XSS). This issue affects Stage File Proxy versions: from 0.0.0 to 3.1.7, from 4.0.0 to 4.0.1. | Fri 30 Oct |
| CVE-2026-117625 | unscored | 0.00% | no CPE yet | A missing permission check in Jenkins 2.587 and earlier, LTS 2.580.1 and earlier allows attackers with Overall/Read permission to obtain the server, port, user name, and no-proxy host list of the configured HTTP proxy. | Wed 28 Oct |
| CVE-2026-115823 | unscored | 0.00% | no CPE yet | Starman versions before 0.4019 for Perl send response bodies for HEAD requests, desynchronizing responses on keep-alive connections. For a HEAD request Starman omits chunked framing but still writes the body returned by the application, on both the array and streaming response paths. Responses with a 1xx, 204 or 304 status also carry the body. On a keep-alive or pipelined connection the client reads those bytes as the start of the next response. A front-end proxy that reuses upstream connections may then pair responses with the wrong requests. | Mon 26 Oct |
| CVE-2026-99000 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated--- | 23 Oct |
| CVE-2026-105301 | unscored | 0.00% | no CPE yet | This candidate was rejected after further investigation determined that it is not a security vulnerability. The client certificate chain is validated during mTLS negotiation at the TLS layer or reverse proxy before Keycloak processes CRL Distribution Point or OCSP URLs, so only certificates issued by a CA explicitly trusted by the administrator can trigger these requests. | 21 Oct |
| CVE-2026-98720 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR. | 19 Oct |
| CVE-2026-98418 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocked donor's scheduling context to the lock owner's CPU even when the donor is migration-disabled. The donor does not execute there, and its original execution CPU remains recorded in wake_cpu. set_task_cpu() warns unconditionally for migration-disabled tasks, so a subsequent proxy migration or the wakeup path returning the donor home triggers a false positive: moving a blocked scheduling context does not violate the migration-disabled execution context. For example, creating a mutex owner on CPU1 and a migration-disabled waiter on CPU0 can trigger the following warning: proxy_migrate_repro: donor blocking on CPU0 with migration disabled proxy_migrate_repro: donor moved from CPU0 to CPU1 WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280 ... Call Trace: try_to_wake_up+0x43f/0x780 __mutex_unlock_slowpath+0x330/0x540 owner_fn+0x9f/0xc0 [proxy_migrate_repro] ... proxy_migrate_repro: donor woke on CPU0, task_cpu=0 proxy_migrate_repro: completed Exclude blocked proxy donors from the warning. The proxy wakeup path restores an executable placement before clearing the blocked state. | 19 Oct |
| CVE-2026-93248 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/xe: don't WARN on kernel job timeout when device already wedged igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2 (UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind, a GSC proxy kernel submission can still time out; with the device wedged and the GuC CT stopped it can never complete, so its kernel job times out. Tile0: GT1: Kernel-submitted job timed out WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:... at guc_exec_queue_timedout_job() Workqueue: gt-ordered-wq drm_sched_job_timedout Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even though the device is already wedged. The timeout handler then treats the kernel queue timeout as unexpected and taints the kernel. Honour an already-wedged device even for killed queues so the expected teardown timeout no longer trips the WARN. (cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) | 19 Oct |
| CVE-2025-68180 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref in debugfs odm_combine_segments When a connector is connected but inactive (e.g., disabled by desktop environments), pipe_ctx->stream_res.tg will be destroyed. Then, reading odm_combine_segments causes kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 16 UID: 0 PID: 26474 Comm: cat Not tainted 6.17.0+ #2 PREEMPT(lazy) e6a17af9ee6db7c63e9d90dbe5b28ccab67520c6 Hardware name: LENOVO 21Q4/LNVNB161216, BIOS PXCN25WW 03/27/2025 RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> seq_read_iter+0x125/0x490 ? __alloc_frozen_pages_noprof+0x18f/0x350 seq_read+0x12c/0x170 full_proxy_read+0x51/0x80 vfs_read+0xbc/0x390 ? __handle_mm_fault+0xa46/0xef0 ? do_syscall_64+0x71/0x900 ksys_read+0x73/0xf0 do_syscall_64+0x71/0x900 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f44d4031687 Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00> RSP: 002b:00007ffdb4b5f0b0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007f44d3f9f740 RCX: 00007f44d4031687 RDX: 0000000000040000 RSI: 00007f44d3f5e000 RDI: 0000000000000003 RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007f44d3f5e000 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000040000 </TASK> Modules linked in: tls tcp_diag inet_diag xt_mark ccm snd_hrtimer snd_seq_dummy snd_seq_midi snd_seq_oss snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device x> snd_hda_codec_atihdmi snd_hda_codec_realtek_lib lenovo_wmi_helpers think_lmi snd_hda_codec_generic snd_hda_codec_hdmi snd_soc_core kvm snd_compress uvcvideo sn> platform_profile joydev amd_pmc mousedev mac_hid sch_fq_codel uinput i2c_dev parport_pc ppdev lp parport nvme_fabrics loop nfnetlink ip_tables x_tables dm_cryp> CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:odm_combine_segments_show+0x93/0xf0 [amdgpu] Code: 41 83 b8 b0 00 00 00 01 75 6e 48 98 ba a1 ff ff ff 48 c1 e0 0c 48 8d 8c 07 d8 02 00 00 48 85 c9 74 2d 48 8b bc 07 f0 08 00 00 <48> 8b 07 48 8b 80 08 02 00> RSP: 0018:ffffd1bf4b953c58 EFLAGS: 00010286 RAX: 0000000000005000 RBX: ffff8e35976b02d0 RCX: ffff8e3aeed052d8 RDX: 00000000ffffffa1 RSI: ffff8e35a3120800 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8e3580eb0000 R09: ffff8e35976b02d0 R10: ffffd1bf4b953c78 R11: 0000000000000000 R12: ffffd1bf4b953d08 R13: 0000000000040000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f44d3f9f740(0000) GS:ffff8e3caa47f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006485c2000 CR4: 0000000000f50ef0 PKRU: 55555554 Fix this by checking pipe_ctx-> ---truncated--- | 14 Oct |
585 of 585 · Previous
Download these 585 as CSV · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.