Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-90232 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules linked in: CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518) Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f RSP: 0018:ffffc90004abf160 EFLAGS: 00010212 RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880 RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10 R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08 R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000 FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674) rtnetlink_rcv_msg (net/core/rtnetlink.c:7112) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1319) netlink_sendmsg (net/netlink/af_netlink.c:1900) ____sys_sendmsg (net/socket.c:775) __sys_sendmsg (net/socket.c:2738) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... unregister_netdevice: waiting for veth0 to become free. Usage count = 7 ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at __netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791) __netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963) netdev_upper_dev_link (net/core/dev.c:9009) amt_newlink (drivers/net/amt.c:3321) | Fri 30 Oct |
| CVE-2026-90138 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | Fri 30 Oct |
| CVE-2026-80983 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket refcount leak in smc_switch_conns() smc_switch_conns() takes a reference on the SMC socket before dropping lgr->conns_lock, so the connection stays alive while the CDC slot is fetched: sock_hold(&smc->sk); read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); if (rc) goto err_out; The err_out label only drops the wr_tx link reference, so this early exit returns without the matching sock_put(). The second error exit is not affected, because sock_put() has already run by then. A leaked sk_refcnt means the smc_sock is never destroyed. Its send and receive buffers stay allocated, and for a user socket the reference held on the network namespace is never released, so the netns can no longer be torn down. smc_cdc_get_free_slot() fails when the target link goes down or when the connection has been killed while the switch is in progress. Both are reachable during the link failover this function implements, so the leak is triggered by the same hardware events that make smc_switch_conns() run in the first place. Restructure so there is a single sock_put() covering both outcomes, instead of adding a second one to the error path. | Fri 30 Oct |
| CVE-2026-80852 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: <TASK> worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> | Fri 30 Oct |
| CVE-2026-80841 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/packet: defer vmalloc TX_RING free until skbs finish AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb page references preserve page-backed ring blocks after pg_vec is freed, but they do not preserve a vmalloc mapping. tpacket_destruct_skb() currently drops the pending reference before writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the decrement after those stores. The smp_wmb() in __packet_set_status() orders the frame stores before the decrement. Also recheck pending TX frames under pg_vec_lock before non-closing ring replacement, so a racing send cannot add a pending skb between the initial check and the ring swap. Ring allocation can produce a mixture of page-backed and vmalloc-backed blocks. Allocate deferred-work storage during TX ring setup when the first vmalloc-backed block is encountered, and keep its pointer in the pg_vec allocation header. If allocation fails, return -ENOMEM from ring setup. On socket close, a non-NULL pointer identifies a vmalloc-backed vector without a scan. If TX skbs remain, defer the whole vector to system_long_wq. After pg_vec is detached, a late destructor can skip the pending decrement. Use socket write-memory accounting as the deferred lifetime gate instead: an skb remains charged through its final sock_wfree(), after all ring-frame accesses. The delayed work retains a socket reference and reschedules itself until no TX skbs remain. Move pending_refcnt release to packet_sock_destruct() so late skb destructors and deferred cleanup can safely use it after packet_release(). Page-backed teardown remains synchronous, and no lock is added to the TX completion hot path. | Fri 30 Oct |
| CVE-2026-80761 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here. | Fri 30 Oct |
| CVE-2026-68408 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket that owns a PMSR session is closed, cfg80211_release_pmsr() clears the request's nl_portid and queues pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously. If the interface tears down concurrently, cfg80211_pmsr_wdev_down() is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk) to wait for any running work. The work function acquires wiphy_lock via guard(wiphy) before calling process_abort. This is a deadlock: wdev_down holds wiphy_lock and blocks inside cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same wiphy_lock. Neither thread can proceed. The same deadlock is reachable from cfg80211_leave_locked(), which calls cfg80211_pmsr_wdev_down() for all interface types under wiphy_lock. Fix this by converting pmsr_free_wk from a plain work_struct to a wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running work items, so the explicit guard(wiphy) in the work function is no longer needed. wiphy_work_cancel() can be called safely while holding wiphy_lock - since wiphy_lock prevents the work from running concurrently, wiphy_work_cancel() never blocks, eliminating the deadlock. Remove the cancel_work_sync() for pmsr_free_wk from the NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally just before it, already cancels any pending work under wiphy_lock via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). | Fri 30 Oct |
| CVE-2026-63871 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst, iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock(). These fields may be modified concurrently by connect() or setsockopt() on the same socket, resulting in data-races reported by KCSAN. Fix this by snapshotting the required fields under lock_sock() before calling hci_get_route(). BUG: KCSAN: data-race in memcmp+0x45/0xb0 race at unknown origin, with read to 0xffff8880122135cf of 1 bytes by task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f | Fri 30 Oct |
| CVE-2026-53353 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: hsr: Remove WARN_ONCE() in hsr_addr_is_self(). syzbot reported the warning [0] in hsr_addr_is_self(), whose assumption is simply wrong. hsr->self_node is cleared in hsr_del_self_node(), which is called from hsr_dellink(). Since dev->rtnl_link_ops->dellink() is called before unregister_netdevice_many(), there is a window when user can find the device but without hsr->self_node. Let's remove WARN_ONCE() in hsr_addr_is_self(). [0]: HSR: No self node WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220 Modules linked in: CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39 Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96 RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283 RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000 RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000 R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000 FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0 DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002 DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6feb62ce59 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59 RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004 RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488 </TASK> | Fri 30 Oct |
| CVE-2026-43167 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: xfrm: always flush state and policy upon NETDEV_UNREGISTER event syzbot is reporting that "struct xfrm_state" refcount is leaking. unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2 ref_tracker: netdev@ffff888052f24618 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_tracker_alloc include/linux/netdevice.h:4412 [inline] xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316 xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline] xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022 xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550 xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646 __sys_sendmsg+0x16d/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") implemented xfrm_dev_unregister() as no-op despite xfrm_dev_state_add() from xfrm_state_construct() acquires a reference to "struct net_device". I guess that that commit expected that NETDEV_DOWN event is fired before NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add() is called only if (dev->features & NETIF_F_HW_ESP) != 0. Sabrina Dubroca identified steps to reproduce the same symptoms as below. echo 0 > /sys/bus/netdevsim/new_device dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/) ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \ spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \ offload crypto dev $dev dir out ethtool -K $dev esp-hw-offload off echo 0 > /sys/bus/netdevsim/del_device Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after xfrm_dev_state_add() acquired a reference to "struct net_device". Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit when acquiring a reference to "struct net_device". Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device") re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that commit for unknown reason chose to share xfrm_dev_down() between the NETDEV_DOWN event and the NETDEV_UNREGISTER event. I guess that that commit missed the behavior in the previous paragraph. Therefore, we need to re-introduce xfrm_dev_unregister() in order to release the reference to "struct net_device" by unconditionally flushing state and policy. | Fri 30 Oct |
| CVE-2026-23330 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: complete pending data exchange on device close In nci_close_device(), complete any pending data exchange before closing. The data exchange callback (e.g. rawsock_data_exchange_complete) holds a socket reference. NIPA occasionally hits this leak: unreferenced object 0xff1100000f435000 (size 2048): comm "nci_dev", pid 3954, jiffies 4295441245 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc ec2b3c5): __kmalloc_noprof+0x4db/0x730 sk_prot_alloc.isra.0+0xe4/0x1d0 sk_alloc+0x36/0x760 rawsock_create+0xd1/0x540 nfc_sock_create+0x11f/0x280 __sock_create+0x22d/0x630 __sys_socket+0x115/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0x117/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | Fri 30 Oct |
| CVE-2024-26740 | unscored | 0.00% | linux | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. | Fri 30 Oct |
| CVE-2026-80353 | unscored | 0.00% | no CPE yet | Time-of-check time-of-use (TOCTOU) race condition vulnerability in Apache Tomcat when creating unix domain sockets for the APR/Native connector allows an unauthorised local user to access the unix domain socket. The fix for CVE-2026-65183 only addressed the NIO connector. It did not address the same issue in the APR/Native connector. This issue affects Apache Tomcat: from 9.0.47 through 9.0.122. Users are recommended to upgrade to version 9.0.123, which fixes the issue. | Thu 29 Oct |
| CVE-2026-111115 | unscored | 0.00% | no CPE yet | Apache Kafka's code-generated readers for flexible protocol versions read a tagged-field count declared by the sender and retain a RawTaggedField object for each unknown field. That count was bounded only by the outer request frame size (socket.request.max.bytes); it was not checked against the remaining buffer bytes or capped. Because each entry can be encoded in as little as two bytes (unknown tag 0, size 0), a modest request can declare tens of millions of tagged fields and force one object allocation per declared field. Flexible request headers (header version 2, used by flexible APIs such as ApiVersions v3) are parsed this way, so the amplification applies to the request header itself. Impact: The flexible request header is parsed on the network thread before authorization, request dispatch, and request-time quota accounting. A client can send a request of a few tens of megabytes whose header declares about 20 million tagged fields, forcing roughly that many RawTaggedField allocations and exhausting broker heap or inducing process-wide GC stalls, denying broker service. Because the header is parsed for pre-authentication APIs such as ApiVersions (v3), the allocation can occur before authentication; no Kafka resource ACL or quota is required. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers bounds-check the tagged-field count for flexible-versioned messages, rejecting a negative count, a count exceeding the remaining buffer bytes, or a count exceeding a fixed maximum (10,000), before any per-field allocation. | Wed 28 Oct |
| CVE-2026-111108 | unscored | 0.00% | no CPE yet | Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field. Impact: Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large= array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization.. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). | Wed 28 Oct |
| CVE-2023-54218 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | Wed 28 Oct |
| CVE-2023-54226 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races around sk->sk_shutdown. KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | Wed 28 Oct |
| CVE-2026-99076 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket. | 23 Oct |
| CVE-2026-99062 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet length for buf_used and peer credit. | 23 Oct |
| CVE-2026-99055 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DMABUF and IOURING net_iov types while leaving page-backed checks unchanged. With the guard, the same queue copied the readable prefix, returned a 4096-byte skip hint, and completed without a fault. | 23 Oct |
| CVE-2026-99026 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: team: free skb when broadcast has no txable port bc_transmit() sends the original skb through the last txable port. When no port is txable, it returns false without consuming the skb, but team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the skb and its socket write-memory charge. A TX-enabled, link-down port keeps the broadcast transmit op installed. Carrier can stay up through a second link-up, TX-disabled port or be forced on by userspace. Free the original skb on the no-port path while leaving the existing drop accounting intact. Discovered by Sashiko during review of previous commit. | 23 Oct |
| CVE-2026-98947 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock: Fix memory leak in vmci_transport_recv_dgram_cb() During the closure of a datagram socket, the vmci_transport_recv_dgram_cb() function may be called, which will add the packets to the socket's backlog; then, after the receive queue is cleared, the __release_sock() function will move the packet back from the socket's backlog to the receive queue, which will lead to a memory leak. sock_close __sock_release __vsock_release // take ownership by user-space lock_sock_nested sock_set_flag(sk, SOCK_DEAD) vmci_transport_release vmci_dispatch_dgs vmci_datagram_invoke_guest_handler vmci_transport_recv_dgram_cb sk_receive_skb if (!sock_owned_by_user(sk)) [...] (!) else if sk_add_backlog() [...] (!) skb_queue_purge(&sk->sk_receive_queue) release_sock __release_sock // move all packets from the backlog // to the receive queue (!) sk_backlog_rcv vsock_queue_rcv_skb [...] __sock_queue_rcv_skb if (!sock_flag(sk, SOCK_DEAD)) // Since the socket is "dead", the function will not // be called sk->sk_data_ready(sk) sock_release_ownership(sk); sock_put Add a receive queue cleanup in the socket destructor to fix this. syzkaller report: unreferenced object 0xffff8880117bfb80 (size 240): comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s) hex dump (first 32 bytes): 78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&..... 00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&..... backtrace: [<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505 [<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport] [<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci] [<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci] [<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci] [<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205 [<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314 [<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376 [<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295 Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. | 23 Oct |
| CVE-2026-98925 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by converting self-redirect verdict to __SK_PASS at the beginning of sk_psock_verdict_apply(). This bypasses the __SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting the __SK_PASS path queue the skb to the psock ingress queue. The data is then read via tcp_bpf_recvmsg_parser(), which advances copied_seq exactly once through copied_from_self. Cross-socket redirects continue through __SK_REDIRECT with sk_psock_eat_skb() unchanged. | 23 Oct |
| CVE-2026-89439 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Add a NULL check for sst_inst[] To be consistent with other places, add a NULL check for failed socket loading by checking isst_common.sst_inst[]. | 21 Oct |
| CVE-2026-74560 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/[email protected]/ | 21 Oct |
| CVE-2026-74558 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | 21 Oct |
| CVE-2025-40080 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nbd: restrict sockets to TCP and UDP Recently, syzbot started to abuse NBD with all kinds of sockets. Commit cf1b2326b734 ("nbd: verify socket is supported during setup") made sure the socket supported a shutdown() method. Explicitely accept TCP and UNIX stream sockets. | 19 Oct |
| CVE-2025-40184 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix debug checking for np-guests using huge mappings When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then the debug checking in assert_host_shared_guest() fails on the launch of an np-guest. This WARN_ON() causes a panic and generates the stack below. In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping is a single page but it may be a block map. Update the checking so that the size is not checked and just assumes the correct size. While we're here make the same fix in __pkvm_host_mkyoung_guest(). Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128 Info: Removed ghost socket file "/.lkvm//guest-128.sock". [ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088! [ 1406.521804] kvm [141]: nVHE call trace: [ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8 [ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c [ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104 [ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c [ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8 [ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 [ 1406.522454] kvm [141]: ---[ end nVHE call trace ]--- [ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000 [ 1406.522554] Kernel panic - not syncing: HYP panic: [ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.522554] VCPU:0000000000000000 [ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT [ 1406.523485] Hardware name: FVP Base RevC (DT) [ 1406.523566] Call trace: [ 1406.523629] show_stack+0x18/0x24 (C) [ 1406.523753] dump_stack_lvl+0xd4/0x108 [ 1406.523899] dump_stack+0x18/0x24 [ 1406.524040] panic+0x3d8/0x448 [ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c [ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c [ 1406.524500] handle_exit+0x60/0x17c [ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0 [ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc [ 1406.524919] __arm64_sys_ioctl+0xac/0x104 [ 1406.525067] invoke_syscall+0x48/0x10c [ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0 [ 1406.525322] do_el0_svc+0x1c/0x28 [ 1406.525441] el0_svc+0x38/0x120 [ 1406.525588] el0t_64_sync_handler+0x10c/0x138 [ 1406.525750] el0t_64_sync+0x1ac/0x1b0 [ 1406.525876] SMP: stopping secondary CPUs [ 1406.525965] Kernel Offset: disabled [ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f [ 1406.526130] Memory Limit: none [ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic: [ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.959099] VCPU:0000000000000000 ] | 19 Oct |
| CVE-2025-40230 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mm: prevent poison consumption when splitting THP When performing memory error injection on a THP (Transparent Huge Page) mapped to userspace on an x86 server, the kernel panics with the following trace. The expected behavior is to terminate the affected process instead of panicking the kernel, as the x86 Machine Check code can recover from an in-userspace #MC. mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134 mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0} mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The root cause of this panic is that handling a memory failure triggered by an in-userspace #MC necessitates splitting the THP. The splitting process employs a mechanism, implemented in try_to_map_unused_to_zeropage(), which reads the pages in the THP to identify zero-filled pages. However, reading the pages in the THP results in a second in-kernel #MC, occurring before the initial memory_failure() completes, ultimately leading to a kernel panic. See the kernel panic call trace on the two #MCs. First Machine Check occurs // [1] memory_failure() // [2] try_to_split_thp_page() split_huge_page() split_huge_page_to_list_to_order() __folio_split() // [3] remap_page() remove_migration_ptes() remove_migration_pte() try_to_map_unused_to_zeropage() // [4] memchr_inv() // [5] Second Machine Check occurs // [6] Kernel panic [1] Triggered by accessing a hardware-poisoned THP in userspace, which is typically recoverable by terminating the affected process. [2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page(). [3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page(). [4] Try to map the unused THP to zeropage. [5] Re-access pages in the hw-poisoned THP in the kernel. [6] Triggered in-kernel, leading to a panic kernel. In Step[2], memory_failure() sets the poisoned flag on the page in the THP by TestSetPageHWPoison() before calling try_to_split_thp_page(). As suggested by David Hildenbrand, fix this panic by not accessing to the poisoned page in the THP during zeropage identification, while continuing to scan unaffected pages in the THP for possible zeropage mapping. This prevents a second in-kernel #MC that would cause kernel panic in Step[4]. Thanks to Andrew Zaborowski for his initial work on fixing this issue. | 19 Oct |
| CVE-2026-98849 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDP socket before register_netdevice(). If registration fails after pfcp_dev_init() succeeds, the core calls pfcp_dev_uninit(), which releases the socket and clears pfcp->sk. The newlink error path then releases it again, causing a NULL pointer dereference. This was observed with failslab fault injection: FAULT_INJECTION: forcing a failure. kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net) BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50 Read of size 8 at addr 0000000000000120 by task ip/1037 Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x468/0x5cc kasan_report+0xa4/0xf0 __asan_load8+0x7c/0xd0 udp_tunnel_sock_release+0x1c/0x50 pfcp_newlink+0x128/0x184 rtnl_newlink+0x848/0xe44 rtnetlink_rcv_msg+0x468/0x514 netlink_rcv_skb+0xc0/0x1f0 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x558 netlink_sendmsg+0x2b8/0x584 ... Return from pfcp_del_sock() if pfcp->sk is NULL. | 19 Oct |
| CVE-2026-98802 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | 19 Oct |
| CVE-2026-98801 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_RESERVE_MEM to TCP sockets and cap max value Commit 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") and commit d00c8ee31729 ("net: fix possible NULL deref in sock_reserve_memory") only checked sk_has_account(sk), which is true for both TCP and UDP sockets. However, SO_RESERVE_MEM and sk_unused_reserved_mem() are currently only supported by TCP: - On UDP sockets, sk->sk_forward_alloc is protected by sk->sk_receive_queue.lock, whereas sock_reserve_memory() and sock_release_reserved_memory() only acquire lock_sock(sk). Concurrent UDP packet reception/release and setsockopt(SO_RESERVE_MEM) corrupt sk_forward_alloc and memcg accounting. - udp_rmem_release() reclaims excess sk_forward_alloc without accounting for sk_unused_reserved_mem(sk). Restrict sock_reserve_memory() to TCP sockets (sk_is_tcp(sk)) for now. Supporting SO_RESERVE_MEM for UDP (acquiring sk_receive_queue.lock and honoring sk_unused_reserved_mem() in udp_rmem_release()) can be done in a future net-next series if needed. In addition, reject val > SZ_1G with -EINVAL in sk_setsockopt(SO_RESERVE_MEM). Without an upper bound, values near INT_MAX cause sk_mem_pages(delta) and (pages << PAGE_SHIFT) to overflow 32-bit signed int, corrupting sk->sk_forward_alloc and sk->sk_reserved_mem. Using a page-aligned cap (SZ_1G) ensures that the page-rounded sk->sk_reserved_mem reported by getsockopt(SO_RESERVE_MEM) can always be passed back to setsockopt(SO_RESERVE_MEM). | 19 Oct |
| CVE-2026-98643 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of rtt_min in sock_ops A sockops prog reading skops->rtt_min never checks the sk type: on the tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of the request_sock, returning dirty adjacent memory. SEC("sockops") int prog(struct bpf_sock_ops *skops) { switch (skops->op) { case BPF_SOCK_OPS_RWND_INIT: leak = skops->rtt_min; /* reads the request_sock OOB */ ... } } For instance one such read returned rtt_min=0xffff8881, the high half of a leaked kernel pointer. Guarding that cast is exactly what SOCK_OPS_GET_FIELD() does -- it checks is_locked_tcp_sock and returns 0 when sock_ops->sk is not a locked full socket. Every other tcp_sock field in sock_ops goes through it; rtt_min is the only one open-coded, so it skips the check. Read rtt_min through SOCK_OPS_GET_FIELD() too. rtt_min is a bit special: it is a struct minmax and we only want the current min, so pass rtt_min.s[0].v. That is equivalent to the old hand-computed offset offsetof(struct tcp_sock, rtt_min) + sizeof_field(struct minmax_sample, t) (s[0] sits at rtt_min + 0 and .v at + sizeof(.t), i.e. what minmax_get() returns), so the loaded field is unchanged and only the full-sock guard is added. The two BUILD_BUG_ON()s that protected the hand-computed offset are no longer needed. Before patch: 0: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 1: r1 = *(u32 *)(r1 +2324) ; ((tcp_sock *)sk)->rtt_min.s[0].v After patch: 0: *(u64 *)(r1 +56) = r9 1: r9 = *(u8 *)(r1 +50) ; is_locked_tcp_sock 2: if r9 == 0 goto pc+4 ; not a locked full sock -> 0 3: r9 = *(u64 *)(r1 +56) 4: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 5: r1 = *(u32 *)(r1 +2324) ; rtt_min.s[0].v 6: goto pc+2 7: r9 = *(u64 *)(r1 +56) 8: r1 = 0 | 19 Oct |
| CVE-2026-98624 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: hold nfnl mutex in event notifier We must serialize the release notifier and the config netlink function. A concurrent thread can issue close() which can call the release function while unrelated socket processes UNBIND request for same portid: Oops: general protection fault, [..] RIP: 0010:__instance_destroy+0x60/0x210 [nfnetlink_queue] Call Trace: nfqnl_recv_config+0x9b0/0xdc0 [nfnetlink_queue] nfnetlink_rcv_msg+0x7c2/0xeb0 ? __pfx_nfnetlink_rcv_msg+0x10/0x10 After this, parallel UNBIND and URELEASE events are impossible. This change isn't nice, but its the shortest fix given instances are not refcounted and the nfnetlink config callback drops the rcu read lock early due to need for sleeping allocations. | 19 Oct |
| CVE-2026-98595 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation. | 19 Oct |
| CVE-2026-98590 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sock context code generation Currently, the ctx access code reads the rx_queue_mapping field with either a 4-byte or 2-byte load. The rest of the bits in the register are marked known zero by the verifier. However, the emitted ctx access code places in the register on certain the special value (-1) using BPF_MOV_IMM64, which gets sign-extended to turn on all the bits in the register. By shifting this value right, the program ends up with a value at runtime above what the verifier assumes is possible. Fix this by ensuring the read value is as wide as the assumed size. Use MOV32 instructions instead of MOV64 instructions to keep the upper bits zero as assumed by the verifier. Also properly report the size of the destination variable (the bpf_sock field, 4 bytes) instead of the source (the socket field, 2 bytes). | 19 Oct |
| CVE-2026-98581 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm() nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still linked on local->connecting_sockets: it looks the socket up with nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and returns, without taking the socket lock and without unlinking the socket from the connecting_sockets list. llcp_sock_release() selects the list to unlink from by sk_state: a socket in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the sockets list. Because recv_dm left the socket physically on connecting_sockets but in the LLCP_CLOSED state, release() takes the else branch and calls nfc_llcp_sock_unlink(&local->sockets, sk). That runs sk_del_node_init() while holding sockets.lock, i.e. it removes the socket from the connecting_sockets hlist under the wrong lock. A concurrent connect() linking another socket onto connecting_sockets under connecting_sockets.lock then mutates the same hlist unserialized, which corrupts the list and desyncs the sk_add_node()/sk_del_node_init() sock_hold()/__sock_put() pairing. An unprivileged local process holding LLCP sockets, with the DM supplied by the remote peer over an established LLCP link, can drive this to leak kernel sockets without bound (the mis-decrement goes through the non-freeing __sock_put() path, so the object is never released), leading to memory exhaustion / DoS. This is the same class of bug that was fixed in the sibling handler nfc_llcp_recv_cc() by commit b493ea2765cc ("nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()"); recv_dm did not receive the equivalent fix. Fix it the same way: take lock_sock(), re-check that the socket is still hashed (release() may have won the race), and for the NOBOUND/REJ case unlink it from connecting_sockets before moving it to LLCP_CLOSED. The unlink drops the connecting_sockets membership reference via sk_del_node_init(), leaving the socket unhashed, so the later nfc_llcp_sock_unlink() in llcp_sock_release() becomes a no-op and no double put occurs. | 19 Oct |
| CVE-2026-98580 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check. | 19 Oct |
| CVE-2026-98560 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it. | 19 Oct |
| CVE-2026-98556 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gve: DQO: reject TSO packets with an out of range MSS gve_prep_tso() notes that the device requires the MSS to be <= 9728, but does not enforce it, assuming the 9K MTU enforced by the hypervisor and the 64KB limit on TSO sizes are enough. This does not hold for packets that were not generated locally. A guest behind a tap, or any packet socket user, can provide an arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check the MTU for GSO packets (is_skb_forwardable()), and gso_features_check() only bounds skb->len and gso_segs, never gso_size. Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size into the mss field of the TSO context descriptor. This field is 14 bits wide, so a gso_size of 16384 is silently turned into an MSS of zero. Drop these packets from gve_prep_tso(), and make sure that gve_features_check_dqo() leaves their GSO bits alone: skb_segment() splits at gso_size regardless of the MTU, so falling back to software segmentation would give the device non TSO packets bigger than the 9728 bytes it supports. Note that the device can still be given oversized non TSO packets when the stack segments in software for other reasons, for instance after TSO has been disabled with ethtool. This is a generic issue, because the MTU check is skipped for GSO packets in the forwarding path, and is addressed separately. | 19 Oct |
| CVE-2026-98547 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: af_packet: fix integer overflow in prb_calc_retire_blk_tmo() prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic: mbits = (blk_size_in_bytes * 8) / (1024 * 1024); If I'm reading the validation right, tp_block_size is user controlled and packet_set_ring() only rejects values that are <= 0 as int or not page aligned, so a 256MiB block goes right through (and alloc_one_pg_vec_page() even has a vzalloc fallback for it). 0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps (div == 1) the function ends up returning -2047. The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1, so the trigger set is [256,512), [768,1024), [1280,1536) and [1792,2048) MiB. Other sizes wrap to non-negative values and faster links divide the unsigned value back below 2^31, which is why this doesn't blow up for everyone. What makes it fatal is what happens next in init_prb_bdqc(): p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...)); hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime, HRTIMER_MODE_REL_SOFT); A negative relative timeout expires immediately. The callback unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns the negative interval into hrtimer_resolution: if (interval < hrtimer_resolution) interval = hrtimer_resolution; So the SOFT timer re-fires at the maximum rate forever, holding sk_receive_queue.lock each pass. One CPU spins in softirq until the socket is closed. Repeat with more rings and the machine is gone. The overflow itself is ancient - it was introduced together with TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation."). Its effect prior to f7460d2989fa ("net: af_packet: Use hrtimer to do the retire operation", v6.18) was not as clear-cut, though: the return value was stored into an unsigned short retire_blk_tov, so a negative result was truncated, and a 0-jiffy delay loop could be programmed as well. Neither is nearly as detrimental as the immediate maximum-rate spin the hrtimer conversion turned it into. (Unrelated to CVE-2019-20812 - that one was the ethtool failure path returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.) Reproducer, needs CAP_NET_RAW (a --network host container has it by default) and a 1 Gbps NIC (QEMU e1000 works): int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); bind(fd, ...); int v = TPACKET_V3; setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v)); struct tpacket_req3 req = { .tp_block_size = 0x10000000, .tp_block_nr = 1, .tp_frame_size = 2048, .tp_frame_nr = 0x10000000 / 2048, .tp_retire_blk_tov = 0, }; setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req)); Compute in 64 bits instead. The operands are already bounded by the existing validation, so nothing else changes. If you'd prefer a different fix, just say so and I'll respin. | 19 Oct |
| CVE-2026-98541 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22). | 19 Oct |
| CVE-2026-98525 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag() When a socket transmits a packet with MCTP_TAG_PREALLOC set, mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list and matches netid, req_tag, peer_addr, and manual_alloc, without checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the same network namespace to use and consume another socket's preallocated tag. Iterate the socket's own tag list (&msk->keys via sklist) instead of the namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring that only tags allocated by msk are matched. Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag (0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a 4-byte message with MCTP_TAG_PREALLOC from socket B in the same network namespace. On the unfixed kernel, sendto(sock_b) using socket A's preallocated tag succeeds (ret = 4); with this patch applied, sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a) succeeds (ret = 4). | 19 Oct |
| CVE-2026-98460 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command. | 19 Oct |
| CVE-2026-98459 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink(). | 19 Oct |
| CVE-2026-98458 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put. | 19 Oct |
| CVE-2026-98455 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. | 19 Oct |
| CVE-2026-98449 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again. | 19 Oct |
| CVE-2026-98379 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rpfilter: reject routes without inet6_dev ip6_route_lookup() can return an error-free route whose rt6i_idev is NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects in the FIB. An unprivileged user can construct this state with rtnetlink in a private user and network namespace, then trigger a NULL dereference through an IPv6 rpfilter lookup: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: rpfilter_mt (net/ipv6/netfilter/ip6t_rpfilter.c:75) Call Trace: ip6t_do_table (net/ipv6/netfilter/ip6_tables.c:316) nf_hook_slow (net/netfilter/core.c:619) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6216) process_backlog (net/core/dev.c:6680) __napi_poll (net/core/dev.c:7739) net_rx_action (net/core/dev.c:7959) handle_softirqs (kernel/softirq.c:622) do_softirq.part.0 (kernel/softirq.c:523) __local_bh_enable_ip (kernel/softirq.c:450) __dev_queue_xmit (net/core/dev.c:4913) packet_sendmsg (net/packet/af_packet.c:3139) __sys_sendto (net/socket.c:2252) __x64_sys_sendto (net/socket.c:2259) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Reject routes without an inet6_dev immediately after lookup. Such routes are not eligible for reverse-path filtering, and the check protects all later rt6i_idev dereferences. | 19 Oct |
| CVE-2026-98306 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet received on that enslaved interface. Such a packet matches an unbound UDP or TCP socket only when udp_l3mdev_accept or tcp_l3mdev_accept is set. | 19 Oct |
Download these 633 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.