Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-52960 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18. | 21 Oct |
| CVE-2026-52956 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | 21 Oct |
| CVE-2026-45859 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation Ulrich reports a regression with nfqueue: If an application did not set the 'F_GSO' capability flag and a gso packet with an unconfirmed nf_conn entry is received all packets are now dropped instead of queued, because the check happens after skb_gso_segment(). In that case, we did have exclusive ownership of the skb and its associated conntrack entry. The elevated use count is due to skb_clone happening via skb_gso_segment(). Move the check so that its peformed vs. the aggregated packet. Then, annotate the individual segments except the first one so we can do a 2nd check at reinject time. For the normal case, where userspace does in-order reinjects, this avoids packet drops: first reinjected segment continues traversal and confirms entry, remaining segments observe the confirmed entry. While at it, simplify nf_ct_drop_unconfirmed(): We only care about unconfirmed entries with a refcnt > 1, there is no need to special-case dying entries. This only happens with UDP. With TCP, the only unconfirmed packet will be the TCP SYN, those aren't aggregated by GRO. Next patch adds a udpgro test case to cover this scenario. | 21 Oct |
| CVE-2026-43464 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | 21 Oct |
| CVE-2026-43101 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data() We need to check __in6_dev_get() for possible NULL value, as suggested by Yiming Qian. Also add skb_dst_dev_rcu() instead of skb_dst_dev(), and two missing READ_ONCE(). Note that @dev can't be NULL. | 21 Oct |
| CVE-2026-98056 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present instead of by the size of the gap. | 21 Oct |
| CVE-2026-90234 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFS: Return a delegation the client fails to record When an NFS server grants a delegation in an OPEN reply, nfs_inode_set_delegation() records it on the client. However, three of its error flows return without sending DELEGRETURN. A delegation can be relinquished only by DELEGRETURN (RFC 8881 Section 20.2.4), so dropping one silently leaves the server believing the client still holds it. If the server happens to recall that delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE because it has no record of the stateid. The server revokes the delegation and moves it onto its cl_revoked list, because the client never sends the FREE_STATEID that would drain it. Every subsequent SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED, and the client's state manager loops issuing TEST_STATEID across its delegations without ever clearing the condition. The window is easy to reach now that a server offers a write delegation on any write OPEN: a delegation recalled for one opener races a re-open that the server answers with a fresh write delegation. Instead of dropping it, hand the delegation back during these error flows. | 21 Oct |
| CVE-2026-90149 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. | 21 Oct |
| CVE-2026-89685 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix clock domain mismatch in clients_still_reclaiming() clients_still_reclaiming() computes a deadline from nn->boot_time (CLOCK_REALTIME, ~1.7 billion) but compares it against ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot). The comparison is always false — it would take ~54 years of uptime for BOOTTIME to exceed the REALTIME-derived deadline. This means any client can hold the server in grace indefinitely by sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim operations for all other clients. Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time and use it for the deadline computation. boot_time (CLOCK_REALTIME) is preserved for its cl_boot clientid-nonce role. | 21 Oct |
| CVE-2026-89680 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly. | 21 Oct |
| CVE-2026-89648 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: cap delegated inode count in ceph_parse_deleg_inos() ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers from an MDS create-with-delegation reply. For each set it reads a 64-bit start and a 64-bit len with ceph_decode_64_safe(), which only validates that the eight bytes are present in the message, not the value, and then loops over len while inserting entries into s_delegated_inos. len is fully attacker controlled. A malicious or compromised MDS can send one huge interval, many intervals in one reply, duplicate intervals, or repeated replies that accumulate delegated inodes on the same session. The original code bounded none of these and could spin the insert loop or grow the xarray without limit. Bound both dimensions with a single enforcement point. Track the number of delegated inodes held by each MDS session in an atomic counter and grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless() to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper is the only place the counter grows, the per-session population can never exceed the cap, so no separate per-session pre-check is needed. The counter is decremented when async create consumes a delegated inode or when an insert fails, incremented when a delegated inode is restored, initialized with the session xarray, and reset when reconnect destroys the xarray. A per-session cap alone still lets one reply spin the insert loop on duplicate ranges without growing the counter, so also cap the aggregate interval length accepted from a single reply. Together these bound both the loop trip count per reply and the xarray population across replies. The cap is a fixed, client-chosen constant rather than a value derived from the MDS. mds_client_prealloc_inos is a userspace MDS configuration option; it is never sent to the kernel client on the wire, and a server-supplied bound could not be trusted for a defensive limit in any case. The constant is set well above that option's documented default of 1000 (a generous multiple), so legitimate refill behavior is unaffected while the CPU and xarray memory a malformed delegation stream can consume stays bounded. Impact: a malicious or compromised Ceph MDS can no longer make a client spin through an unbounded delegated-inode interval or grow one session's delegated-inode xarray without limit. | 21 Oct |
| CVE-2026-89647 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | 21 Oct |
| CVE-2026-89544 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. | 21 Oct |
| CVE-2026-89528 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Read lists that exceed the page budget Individual Read segment lengths are validated at decode time, but nothing prevents a requester from sending multiple segments whose cumulative length exceeds the rq_pages array budget. When one segment fills the page array exactly, the runtime guard in svc_rdma_build_read_segment() is bypassed because len reaches zero. A subsequent segment then accesses the NULL sentinel slot at rq_pages[rq_maxpages], resulting in a NULL pointer dereference during DMA mapping. Accumulate pages across all Read segments and reject the message at decode time when the total would overflow the page budget. | 21 Oct |
| CVE-2026-80637 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | 21 Oct |
| CVE-2026-80614 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: emac: Fix NULL pointer dereference in emac_probe Move devm_request_irq() after devm_platform_ioremap_resource() so that dev->emacp is mapped before the interrupt handler can fire. An early interrupt hitting emac_irq() would dereference the NULL dev->emacp and crash. Also remove redundant error message. devm_platform_ioremap_resource() already returns an error message with dev_err_probe(). | 21 Oct |
| CVE-2026-74374 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix error-path detection with md_cloned_bio() Detect the error path using md_cloned_bio() instead of relying on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be NULL or -1 after splitting and resubmitting a failed bio. As a result, the error path may not be recognized and memory allocations can incorrectly use GFP_NOIO instead of (GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under memory pressure. | 21 Oct |
| CVE-2026-72438 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending and barrier reference leaks on discard failures raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. | 21 Oct |
| CVE-2026-72203 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | 21 Oct |
| CVE-2026-64048 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. | 19 Oct |
| CVE-2025-68349 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid Fixes a crash when layout is null during this call stack: write_inode -> nfs4_write_inode -> pnfs_layoutcommit_inode pnfs_set_layoutcommit relies on the lseg refcount to keep the layout around. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attempt to reference a null layout. | 19 Oct |
| CVE-2025-40048 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | 19 Oct |
| CVE-2025-40053 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: dlink: handle copy_thresh allocation failure The driver did not handle failure of `netdev_alloc_skb_ip_align()`. If the allocation failed, dereferencing `skb->protocol` could lead to a NULL pointer dereference. This patch tries to allocate `skb`. If the allocation fails, it falls back to the normal path. Tested-on: D-Link DGE-550T Rev-A3 | 19 Oct |
| CVE-2025-40129 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix null pointer dereference on zero-length checksum In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes checksum.data to be set to NULL. This triggers a NPD when accessing checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that the value of checksum.len is not less than XDR_UNIT. | 19 Oct |
| CVE-2025-40183 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | 19 Oct |
| CVE-2025-40187 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce() If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0 and sctp_ulpevent_make_authkey() returns 0, then the variable ai_ev remains zero and the zero will be dereferenced in the sctp_ulpevent_free() function. | 19 Oct |
| CVE-2026-68315 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer. | 19 Oct |
| CVE-2026-68299 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively. | 19 Oct |
| CVE-2026-68287 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | 19 Oct |
| CVE-2026-68157 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bucket whose name exists in the CRUSH map while its type has no matching entry in type_names. get_immediate_parent() then dereferences a NULL type_cn and passes an invalid pointer into strcmp(), causing a null-ptr-deref. Skip such malformed parent buckets unless both the bucket name and type name metadata are present. This keeps malformed hierarchy data from crashing locality lookup and safely falls back to "not local". [ idryomov: add WARN_ON_ONCE ] | 19 Oct |
| CVE-2026-68155 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ] | 19 Oct |
| CVE-2026-68141 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/af_iucv: fix NULL deref in afiucv_hs_callback_syn() afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC. If the allocation fails, nsk is NULL. The connection-refused path is entered when the listen state check fails, the accept backlog is full, or nsk is NULL. The code unconditionally calls iucv_sock_kill(nsk) in that path. iucv_sock_kill() does not accept a NULL socket pointer and immediately dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL, calling iucv_sock_kill(nsk) results in a NULL pointer dereference. Only call iucv_sock_kill() when a child socket was successfully allocated. | 19 Oct |
| CVE-2026-68131 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | 19 Oct |
| CVE-2026-68129 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | 19 Oct |
| CVE-2026-68096 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: lock_two_directories+0x13f/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&inode->i_sb->s_type->i_mutex_dir_key/1); lock(&inode->i_sb->s_type->i_mutex_dir_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by mv/5099: #0: ffff888112a9c440 (sb_writers#13) at: do_renameat2+0x34c/0xbc0 #1: ffff888112a9c790 (&type->s_vfs_rename_key#3) at: do_renameat2+0x415/0xbc0 #2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1) at: lock_two_directories+0x13f/0x2b0 #3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5) at: lock_two_directories+0x175/0x2b0 #4: ffffffffb3a1fb10 (&fsnotify_mark_srcu) at: fsnotify+0x454/0x28a0 #5: ffffffffaf886230 (audit_filter_mutex) at: audit_update_watch+0x36/0x11e0 stack backtrace: Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_deadlock_bug.cold+0xbd/0xca validate_chain+0x83a/0xf00 __lock_acquire+0xcac/0x1d20 lock_acquire.part.0+0x11b/0x360 down_write_nested+0x9f/0x230 __kern_path_locked+0x10a/0x2f0 kern_path_locked+0x26/0x40 audit_alloc_mark+0xfb/0x4f0 audit_dupe_exe+0x6c/0xe0 audit_dupe_rule+0x6c2/0xc00 audit_update_watch+0x4cc/0x11e0 audit_watch_handle_event+0x12c/0x1b0 send_to_group+0x5d0/0x8b0 fsnotify+0x615/0x28a0 fsnotify_move+0x1d8/0x630 vfs_rename+0xdcd/0x1df0 do_renameat2+0x9d4/0xbc0 __x64_sys_renameat+0x192/0x260 do_syscall_64+0x92/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0491fe8c4e Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89 RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c </TASK> The aforementioned deadlock can be consistently reproduced by running the script below: audit-dupe-exe-deadlock.sh -------------------------- #!/bin/bash auditctl -D mkdir -p /tmp/foo touch /tmp/file auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr mv /tmp/file /tmp/foo/file rm -Rf /tmp/foo This patch fixes the issue by introducing struct audit_watch_ctx to pass the fsnotify event context down to audit_alloc_mark(). By utilizing the already-resolved directory inode provided by the event, we bypass the kern_path_parent() path resol ---truncated--- | 19 Oct |
| CVE-2026-64545 | 7.5 high | 1.0% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. | 19 Oct |
| CVE-2026-53397 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix posix_acl leak on SETACL decode failure nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each call nfs_stream_decode_acl() twice, first for NFS_ACL and then for NFS_DFACL. Each successful call transfers ownership of a freshly allocated posix_acl into argp->acl_access or argp->acl_default. If the first call succeeds but the second fails, the decoder returns false and argp->acl_access is left dangling. ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle. Both only call fh_put() and have no knowledge of the ACL fields on argp. The posix_acl_release() pairs sat at the out: labels inside nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process() skips pc_func when pc_decode returns false, so that cleanup is unreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */ The orphaned posix_acl is leaked for the lifetime of the server. Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(), which release both argp->acl_access and argp->acl_default in addition to fh_put(), and wiring them as pc_release for their respective SETACL procedures. pc_release runs on every path svc_process() takes after decode, including decode failure, so the posix_acl_release() pairs are removed from the proc functions' out: labels to keep ownership in one place. This matches the existing release_getacl() pattern used by the sibling GETACL procedures. | 19 Oct |
| CVE-2026-53394 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race When find_or_alloc_open_stateowner() encounters an unconfirmed owner, it calls release_openowner() and sets oo = NULL. Control then falls through past the `if (oo)` guard -- which would have freed any pre-allocated `new` -- and unconditionally executes `new = alloc_stateowner(...)`. If `new` was already allocated on a prior iteration, the pointer is silently overwritten and the previous allocation (slab object + owner name buffer) is leaked. This requires a race: two NFSv4.0 OPEN threads with the same owner string, where a concurrent thread inserts a new unconfirmed owner into the hash between retry iterations. The window is narrow but repeatable under adversarial conditions. Fix by adding `goto retry` after `oo = NULL` so the already-allocated `new` is reused on the next iteration rather than overwritten. | 19 Oct |
| CVE-2026-53392 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. | 19 Oct |
| CVE-2026-53391 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately calls strrchr(buf, '.') to locate the port separator. Both decodes use xdr_stream_decode_string_dup(), and the current code checks only "nlen < 0" / "rlen < 0" before dereferencing the returned string. When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline() returns 0 and xdr_stream_decode_string_dup() falls through to its "*str = NULL; return ret" tail, leaving buf NULL with a return value of 0. The "< 0" check does not catch this, and the next line is strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from any pNFS-flexfile client mounted against a malicious or compromised metadata server. Reject the zero-length cases explicitly so the decoder fails with -EBADMSG (treated as a malformed GETDEVICEINFO body) instead of panicking the client. | 19 Oct |
| CVE-2026-53199 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. | 19 Oct |
| CVE-2026-53003 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | 19 Oct |
| CVE-2026-52998 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. | 19 Oct |
| CVE-2026-52981 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: neigh: let neigh_xmit take skb ownership neigh_xmit always releases the skb, except when no neighbour table is found. But even the first added user of neigh_xmit (mpls) relied on neigh_xmit to release the skb (or queue it for tx). sashiko reported: If neigh_xmit() is called with an uninitialized neighbor table (for example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT and bypasses its internal out_kfree_skb error path. Because the return value of neigh_xmit() is ignored here, does this leak the SKB? Assume full ownership and remove the last code path that doesn't xmit or free skb. | 19 Oct |
| CVE-2026-52974 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: tls: fix strparser anchor skb leak on offload RX setup failure When tls_set_device_offload_rx() fails at tls_dev_add(), the error path calls tls_sw_free_resources_rx() to clean up the SW context that was initialized by tls_set_sw_offload(). This function calls tls_sw_release_resources_rx() (which stops the strparser via tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context), but never frees the anchor skb that was allocated by alloc_skb(0) in tls_strp_init(). Note that tls_sw_free_resources_rx() is exclusively used for this "failed to start offload" code path, there's no other caller. The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use the standard strparser"), because the standard strparser doesn't try to pre-allocate an skb. The normal close path in tls_sk_proto_close() handles cleanup by calling tls_sw_strparser_done() (which calls tls_strp_done()) after dropping the socket lock, because tls_strp_done() does cancel_work_sync() and the strparser work handler takes the socket lock. | 19 Oct |
| CVE-2026-52957 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. Now, it is only attempted to access the bucket if it is not NULL. | 19 Oct |
| CVE-2026-52954 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ] | 19 Oct |
| CVE-2026-52929 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. | 19 Oct |
| CVE-2026-46102 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized. | 19 Oct |
| CVE-2026-46052 | 7.5 high | 1.0% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: <TASK> lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives. | 19 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.