Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-98306 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet received on that enslaved interface. Such a packet matches an unbound UDP or TCP socket only when udp_l3mdev_accept or tcp_l3mdev_accept is set. | 19 Oct |
| CVE-2026-98293 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well. | 19 Oct |
| CVE-2026-98288 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO header length truncation stmmac_tso_xmit() stores the protocol header length returned by stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo 256 (486 becomes 230, 256 becomes 0). A TCP over IPv6 socket carrying a few hundred bytes of sticky destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255 while staying below the 1023-byte limit, so such an skb reaches stmmac_tso_xmit(). Widen proto_hdr_len to unsigned int, which is sufficient since the value is bounded by the hardware limit, and adjust the debug print specifier accordingly. | 19 Oct |
| CVE-2026-98284 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been lockless since commit 21e4902aea80 ("netlink: Lockless lookup with RCU grace period in socket release"). Both can read a freed buffer, and sk_diag_dump_groups() can also read past the end of the old (smaller) buffer if it happens to load the old @groups pointer together with the new @ngroups value, copying the result into a NETLINK_DIAG_GROUPS attribute. This is the same class of bug that commit f773608026ee ("netlink: access nlk groups safely in netlink bind and getname") fixed for bind() and getname(); these two readers were missed. Simply grabbing the table lock in sk_diag_dump_groups() is not an option, because it is also called with nl_table_lock already held from the mc_list section of the dump. Make the lockless readers safe instead: - Allocate a new bitmap and free the old one after an RCU grace period, instead of relying on the implicit kfree() done by krealloc(). - Publish @groups before @ngroups, both with release semantics, and have the lockless readers load @ngroups first. A reader can then never pair the new (bigger) size with the old (smaller) buffer, and a reader picking up the new pointer while still seeing the old size is guaranteed to see the initialized bitmap. netlink_realloc_groups() is called from process context (bind() and setsockopt()), so kfree_rcu_mightsleep() can be used, once the table has been released. | 19 Oct |
| CVE-2026-98274 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb() PSP conflicts with TLS ULP in its usage of both skb->decrypted and sk->sk_validate_xmit_skb(). Make PSP mutually exclusive with TLS ULP, the only other user of either of these. As other users of skb->decrypted come along, they can be added to sk_has_decrypt_user(). It would make sense to also assert that sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for similar future proofing, but the PSP listener/sk_clone() path is still broken and it could be seen as a regression to not allow rx assoc to run on a child of a listener socket with PSP tx assoc state. Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS is the only one that conflicts with PSP via the decrypted bit. This is intentional because PSP was not designed to be used with ULPs. It is best to close off surface area that may make bugs reachable, until someone wishes to design and test an actual user of PSP with ULPs. | 19 Oct |
| CVE-2026-98088 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | 19 Oct |
| CVE-2026-98068 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finishes by moving the path from RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts RDS_CONN_ERROR as the starting state of that final transition, so that a FIN processed in softirq context during the teardown does not derail the shutdown into a noisy error path. But consuming that RDS_CONN_ERROR also consumes the shutdown pass that came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN is a no-op. For the FIN case that is harmless - the socket the FIN arrived on is the very socket the teardown just released. It is not harmless for a dropper that attached something to the path first. rds_tcp_accept_one() is such a dropper. Its path claim in rds_tcp_accept_one_path() transitions RDS_CONN_DOWN -> RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous socket in softirq context, an administrative reset - can put the path into RDS_CONN_ERROR between that claim and the state check that follows, which accepts RDS_CONN_ERROR. The accept then installs the freshly accepted socket with rds_tcp_set_callbacks() while the queued teardown - which sampled tc->t_sock before this socket existed - is still running. rds_connect_path_complete() fails its transition to RDS_CONN_UP and drops the path again, queueing the pass that should reap the socket it just installed. If the in-flight shutdown's final transition consumes that drop's RDS_CONN_ERROR, the queued pass finds the path in RDS_CONN_DOWN and does nothing. The installed socket is never torn down: it sits established with its callbacks armed and its rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some later event drops it again. Reproduced with widened race windows as an ever-growing receive queue on a socket owned by a path stuck in RDS_CONN_DOWN, with the peer's send path wedged behind it. Make the final transition only DISCONNECTING -> DOWN. If it fails because the path is in RDS_CONN_ERROR, a drop raced the teardown: cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one piece of the skipped tail that must not be left behind - and return, letting the pass the drop queued finish the job: it tears down whatever attached to the path in the meantime, completes the transition to RDS_CONN_DOWN, and re-arms the reconnect from its own tail. The timer quiesce in that branch matters because the racing drop does not always queue that pass: rds_conn_path_drop() returns without queueing when a destroy is pending - exactly the situation during a netns teardown or module unload, when a FIN on the dying socket is processed while rds_conn_path_destroy() flushes cp_down_w. If the flushed pass is the one that takes this return, no later pass exists, and rds_conn_path_destroy() would find cp_conn_w still armed (WARN_ON) and then free a path whose reconnect timer can still fire. With the cancel in the branch, every exit of a shutdown pass leaves the timer quiesced no matter which pass completes the transition. The FIN case keeps making progress, one pass later and still without noisy logging. Any other state keeps today's rds_conn_path_error() handling; no current cp_state writer can leave a DISCONNECTING path in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from a non-DISCONNECTING state), so that branch is defensive. On kernels without the preceding patches the same hazard exists with the sample-based quiesce; the fix applies there equally. | 19 Oct |
| CVE-2026-97998 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0 | 19 Oct |
| CVE-2026-97974 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669 rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800 __sock_sendmsg net/socket.c:815 [inline] ____sys_sendmsg+0x565/0x870 net/socket.c:2713 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2767 __sys_sendmsg net/socket.c:2799 [inline] __do_sys_sendmsg net/socket.c:2804 [inline] __se_sys_sendmsg net/socket.c:2802 [inline] __x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899 | 19 Oct |
| CVE-2026-97964 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient headroom and a writable header. | 19 Oct |
| CVE-2026-97958 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:615) ? skb_release_data (net/core/skbuff.c:1122) ? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232) ? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499) ? tc_chain_notify (net/sched/cls_api.c:3045) ? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041) ? netlink_unicast (net/netlink/af_netlink.c:1335) ? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985) ? tc_ctl_chain (net/sched/cls_api.c:3242) ? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146) ? netlink_unicast (net/netlink/af_netlink.c:1354) ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177) ? netlink_rcv_skb (net/netlink/af_netlink.c:2556) ? netlink_unicast (net/netlink/af_netlink.c:1319) ? netlink_sendmsg (net/netlink/af_netlink.c:1900) ? __sock_sendmsg (net/socket.c:800) ? __sys_sendto (net/socket.c:2281) ? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284) ? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) ? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> | 19 Oct |
| CVE-2026-97614 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_brcm: legacy FCS: request needed tailroom The legacy FCS tagger calculates the CRC over skb->len bytes starting at skb->data. When a nonlinear skb reaches the tagger, this reads past the linear head into unrelated slab memory. The tagger appends an Ethernet FCS but does not declare that tailroom. As a result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user port, and nonlinear skbs can reach the CRC calculation. Declare the required tailroom. DSA will then clear those features and the networking core will linearize skbs before the tagger runs. A KASAN-enabled dsa_loop test using this tagger reports: BUG: KASAN: slab-out-of-bounds in crc32_le Read of size 1 at addr ffff8880397086c0 by task exp/135 Call Trace: crc32_le (lib/crc/crc32-main.c:38) brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343) dsa_user_xmit (net/dsa/user.c:942) dev_hard_start_xmit (net/core/dev.c:3937) __dev_queue_xmit (net/core/dev.c:4926) packet_sendmsg (net/packet/af_packet.c:3110) __sys_sendto (net/socket.c:2281) The buggy address belongs to the object at ffff888039708400 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ffff888039708400, ffff8880397086c0) | 19 Oct |
| CVE-2026-90253 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the mesh send cancel command when it is cancelled mesh_send_cancel() queues the pending command with a NULL destroy callback, so it is only freed if send_cancel() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback. | 19 Oct |
| CVE-2026-90252 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the HCI command when it is cancelled mgmt_hci_cmd_sync() queues the pending command with a NULL destroy callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback. The now-empty done label is replaced by a direct return. | 19 Oct |
| CVE-2026-90171 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release pending child sockets outside the handler lock smbdirect_socket_destroy() releases the listener's pending/ready child sockets while still holding the listener's handler lock, the &id_priv->handler_mutex taken via rdma_lock_handler(), not sc->listen.lock, and before the listener's own rdma_destroy_id(). That ordering has one real consequence and one cosmetic one. The real one: smbdirect_socket_release() drops the child's last reference, which destroys the child's cm_id. Doing that before the listener's rdma_destroy_id() lets _cma_cancel_listens(), running from the listener's _destroy_id(), walk an already freed child id_priv, which KASAN catches as a slab-use-after-free during listener shutdown: [ 4758.909130] BUG: KASAN: slab-use-after-free in __mutex_lock+0x1469/0x1560 [ 4758.911450] Read of size 1 at addr ffff88821c381db4 by task ksmbd.control/1652 [ 4758.913262] Call Trace: [ 4758.913267] <TASK> [ 4758.913299] __mutex_lock+0x1469/0x1560 [ 4758.913408] _cma_cancel_listens+0x312/0x3b0 [ 4758.913413] _destroy_id+0x363/0xee0 [ 4758.913417] smbdirect_socket_destroy_sync+0x17d5/0x2440 [ 4758.913443] smbdirect_socket_release+0x124/0x230 [ 4758.913451] ksmbd_rdma_stop_listening+0x9f/0x190 [ 4758.913457] ksmbd_conn_transport_destroy+0x65/0x3c0 [ 4758.913463] kill_server_store+0x1fb/0x2b0 [ 4758.913501] kernfs_fop_write_iter+0x349/0x4d0 [ 4758.913507] vfs_write+0x5e7/0xc70 [ 4758.913528] ksys_write+0x12a/0x210 [ 4758.913541] do_syscall_64+0x135/0x460 [ 4758.913555] entry_SYSCALL_64_after_hwframe+0x77/0x7f The cosmetic one: releasing a child recurses into smbdirect_socket_destroy(), which takes the child's own rdma_lock_handler() lock nested under the listener's. The listener's and the child's cm_id are always different instances, so this cannot deadlock for real; the CM core itself nests a new connection id's handler_mutex under the listening id's in cma_ib_req_handler(). But lockdep only sees one lock class, reports possible recursive locking, and then disables itself, hiding real locking bugs for the rest of the run: [ 2424.579653] WARNING: possible recursive locking detected [ 2424.581180] 7.1.0-next-20260623+ #89 Not tainted [ 2424.582548] -------------------------------------------- [ 2424.584500] ksmbd.control/8854 is trying to acquire lock: [ 2424.586817] ffff888102303c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.590590] [ 2424.590590] but task is already holding lock: [ 2424.591601] ffff888102046c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.594178] [ 2424.594178] other info that might help us debug this: [ 2424.596634] Possible unsafe locking scenario: [ 2424.596634] [ 2424.598841] CPU0 [ 2424.599765] ---- [ 2424.600695] lock(&id_priv->handler_mutex); [ 2424.601836] lock(&id_priv->handler_mutex); [ 2424.602590] [ 2424.602590] *** DEADLOCK *** [ 2424.602590] [ 2424.604512] May be due to missing lock nesting notation Splice the pending/ready children onto a local list under the listener's listen.lock, while the handler lock is held so a concurrent CM CONNECT_REQUEST cannot add more, but defer the actual smbdirect_socket_release() calls until after the listener's cm_id has been destroyed and its handler lock dropped. The children are independent sockets whose teardown needs neither the listener's handler lock nor its cm_id. Found with ksmbdzzer [2], a KSMBD fuzzer that drives libFuzzer with a kcov-dataflow [1] coverage vector: it folds each instrumented comparison/argument's runtime operand value together with its PC (the default arm mixes them as pc⊕val) so that a new operand value at a known site counts as new coverage. [1] https://lwn.net/Articles/1077606/ [2] https://github.com/yskzalloc/kcov-dataflow | 19 Oct |
| CVE-2026-90159 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME. | 19 Oct |
| CVE-2026-90136 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | 19 Oct |
| CVE-2026-90065 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the proto->init hook. When socket creation fails after proto->init has run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE denies the socket - sk_common_release() only invokes sk_prot->destroy if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it, and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call leaks one tcp_sock, so an unprivileged task able to attach a deny-all BPF_CGROUP_INET_SOCK_CREATE program to its own cgroup can grow kernel memory unboundedly. Add a .destroy hook to both protos that releases the clcsock via smc_clcsock_release(). smc_sk_init() hashes the sock into the smc hashinfo before the clcsock is created, and smc_diag dumps walk that hash dereferencing smc->clcsock without taking clcsock_release_lock, while sk_common_release() calls .destroy before .unhash. Unhash the sock before releasing the clcsock, as __smc_release() does, so a concurrent dump cannot observe the release; the second unhash in sk_common_release() is a no-op. | 19 Oct |
| CVE-2026-90063 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: virtio-net: Ensure that TCP packets don't overflow gso_segs The user can specify any gso_size in a packet crafted with an AF_PACKET PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user crafts a packet with gso_size < 8, there is a risk for partial GSO to overflow the 16-bit gso_segs field when dividing the SKB length by gso_size. Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly tested at tools/testing/selftests/net/tun.c:649. | 19 Oct |
| CVE-2026-90055 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-bounds in __vcc_connect(): UBSAN: shift-out-of-bounds in net/atm/common.c:382:32 shift exponent -1 is negative CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 ubsan_epilogue+0xa/0x30 lib/ubsan.c:233 __ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494 __vcc_connect+0x14b4/0x19c0 net/atm/common.c:382 vcc_connect+0x328/0x8f0 net/atm/common.c:498 pvc_bind+0x272/0x380 net/atm/pvc.c:52 __sys_bind+0x2e3/0x410 net/socket.c:1976 __x64_sys_bind+0x7a/0x90 net/socket.c:1979 ... ATM device ci_range fields (vpi_bits and vci_bits) represent the number of bits supported for VPI and VCI addressing on the device. net/atm/common.c directly uses these fields as bit shift counts: vpi >> dev->ci_range.vpi_bits vci >> dev->ci_range.vci_bits 1 << vcc->dev->ci_range.vpi_bits 1 << vcc->dev->ci_range.vci_bits usbatm_atm_init() sets ci_range.vpi_bits and ci_range.vci_bits to ATM_CI_MAX (-1), which is defined in <uapi/linux/atmdev.h> as a sentinel value for userspace ATM_SETCIRANGE requests, not a valid bit count. Shifting by -1 is undefined behavior and triggers UBSAN warnings. ATM UNI cell headers allow up to 8 bits for VPI (0..255) and 16 bits for VCI (0..65535). Initialize vpi_bits to 8 and vci_bits to 16, as done by solos-pci. | 19 Oct |
| CVE-2026-89784 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6 rpcb_register_inet4() and rpcb_register_inet6() store the result of rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL. rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and the unchecked NULL is then carried into the synchronous RPCBPROC_SET encode path: rpcb_register_call() -> rpc_call_sync() -> rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is strlen(string), dereferencing NULL and oopsing the kernel. The crash reproduces under failslab on v6.12; with KASAN the NULL dereference surfaces as a fault on the shadow of address zero: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 [#1] PREEMPT SMP KASAN RIP: 0010:strlen (lib/string.c:409) Call Trace: encode_rpcb_string (net/sunrpc/rpcb_clnt.c:890) rpcb_enc_getaddr (net/sunrpc/rpcb_clnt.c:910) rpcauth_wrap_req_encode (net/sunrpc/auth.c:745) call_encode (net/sunrpc/clnt.c:1966) __rpc_execute (net/sunrpc/sched.c:952) rpc_run_task (net/sunrpc/clnt.c:1243) rpc_call_sync (net/sunrpc/clnt.c:1272) rpcb_v4_register (net/sunrpc/rpcb_clnt.c:500) svc_generic_rpcbind_set nfsd_rpcbind_set svc_register svc_setup_socket svc_addsock write_ports nfsctl_transaction_write vfs_write The crash is reachable when an in-kernel RPC service (nfsd, lockd, nfs-callback) registers with the local rpcbind under enough memory pressure for the small GFP_KERNEL kstrdup() in rpc_sockaddr2uaddr() to fail. The asynchronous getport path already handles this exact failure mode by returning -ENOMEM; only the two register helpers omit the check. Mirror that handling: bail out with -ENOMEM when rpc_sockaddr2uaddr() returns NULL, before the address is fed into the encoder. | 19 Oct |
| CVE-2026-80984 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: do not dereference an unset send buffer on the SMC-D teardown path smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its sk_wait_event() condition, and sk_wait_event() evaluates that condition once with the socket lock released. smcd_buf_detach() clears conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group terminating while a socket waits there leaves the helper dereferencing NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and smc_close_cancel_work() drops the lock across two cancel_*_sync() calls. Sample the pointer once in the helper, report nothing prepared while it is unset, and bound the ioctl the same way. The receive tasklet dereferences the field directly in smc_cdc_msg_recv_action(), not through this helper; 1/2 is what keeps it from running that late. | 19 Oct |
| CVE-2026-80850 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: tcp: fix AO info use-after-free in tcp_ao_connect_init() tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that a key matches the peer and the bound device's current L3 master. tcp_ao_connect_init() later resolves the L3 master again and removes keys which do not match it. The socket lock does not stabilize the bound device's VRF membership. Detaching the device from its VRF between the initial validation and the L3-master calculation in tcp_ao_connect_init() can therefore make the validation succeed while initialization observes the default L3 domain and removes the only key. The subsequent AO lookup then fails, so the no-key path clears tp->ao_info and frees it directly. The receive path can find the socket in the ehash and load tp->ao_info under RCU before acquiring the socket lock. A reader which loaded the old pointer can thus continue into tcp_inbound_ao_hash() after the direct free. The issue was found during a static audit of TCP-AO object lifetime. An unprivileged reproducer in self-created user and network namespaces raced connect() with detaching a veth from its VRF while sending TCP-AO segments. It triggered the same KASAN report on two fresh boots: BUG: KASAN: slab-use-after-free in tcp_inbound_ao_hash+0x585/0x19f0 Write of size 8 at addr ffff88800bf88128 by task tcp_ao_vrf_race/232 Call Trace: tcp_inbound_ao_hash+0x585/0x19f0 tcp_inbound_hash+0x677/0xa80 tcp_v4_rcv+0x1c3e/0x3ab0 Allocated by task 235: tcp_ao_alloc_info+0x43/0xf0 tcp_ao_add_cmd+0xdf7/0x13b0 do_tcp_setsockopt+0x168c/0x2640 Freed by task 235: kfree+0x1b8/0x550 tcp_connect+0x252/0x4f00 tcp_v4_connect+0x1114/0x1720 The bad address is 40 bytes inside the freed 128-byte object, matching the tcp_ao_info counters.key_not_found field. The two runs used 1000 attempts each, reached the no-key path 366 and 411 times, and produced one and two KASAN reports respectively. With this change, the same reproducer reached the no-key path 366 times in 1000 attempts without a KASAN report or oops. Use tcp_ao_destroy_sock() for the no-key path. It unpublishes the AO info, updates the socket memory and static-key accounting, and defers the free until after an RCU grace period. Also drop the WARN_ON_ONCE() and its stale comment. The VRF detach race makes the no-key state reachable during normal operation, so it is a handled condition rather than an impossible assertion. On panic_on_warn kernels the WARN would turn this handled race into a kernel panic. | 19 Oct |
| CVE-2026-80849 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of current_key on reconnect to another peer tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken, with only rcu_read_lock() held. On the fast path for established sockets, if the rnext_keyid sent by the peer differs from current_key->sndid, the key the peer asked for is looked up and stored in current_key. The lookup is inside the RCU read side, but current_key outlives it. When the socket is disconnected and connect() is called again for another peer, tcp_ao_connect_init() unlinks every key that does not match the new peer and frees it with call_rcu(). If current_key points at such a key, it is cleared to NULL. The fast path reads sk_state only once on entry, so a softirq that got into it while the socket was still established can update current_key after that loop has already run. The update is inside the RCU read side, so it comes before the call_rcu() callback, and once the callback frees the key, current_key is left pointing at freed memory. The next transmission picks that pointer up in tcp_get_current_key(). tcp_ao_transmit_skb() then reads the traffic key from the freed object, which is the use-after-free. Wait for one grace period before unlinking, and only if a key is going to be removed. By the time tcp_connect() runs the socket is already in TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so a softirq entering after the wait cannot reach the fast path, and the ones already in it have finished. The existing NULL handling in the loop is then enough. | 19 Oct |
| CVE-2026-80848 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: fix UAF during close ZDI reported and analyzed a race condition during close for espintcp sockets: espintcp_close() frees emsg->skb via kfree_skb() without holding any socket lock. Concurrently, the xfrm_trans_reinject work queue invokes esp_output_tcp_finish() -> espintcp_push_skb() -> espintcp_push_msgs() -> skb_send_sock_locked(), which reads the same skb as a data source. Fix this by adding a synchronize_rcu() call after resetting sk_prot, since esp_output_tcp_finish() runs under RCU and won't use a socket with sk_prot == &tcp_prot. Simply taking the socket lock in espintcp_close() could lead to leaks, if esp_output_tcp_finish() re-adds an skb in the slot we just freed. After this, the existing barrier() is no longer needed. | 19 Oct |
| CVE-2026-80819 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never consulted, and __rfcomm_dlc_close() falls through to rfcomm_dlc_unlink(), which sets d->session = NULL. So a remote DISC on a deferred dlc clears the session while leaving RFCOMM_DEFER_SETUP set. The next recvmsg() then passes the test_and_clear and dereferences a NULL session. No timing window is needed: once the DISC has been processed, the dereference is unconditional. Give rfcomm_dlc_accept() the same shape as rfcomm_dlc_open() and rfcomm_dlc_close(): an exported wrapper that takes rfcomm_mutex and re-checks the session, around a __rfcomm_dlc_accept() that the two in-core callers, which already hold the mutex, keep using. Reproduced on a KASAN + PROVE_LOCKING kernel with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session, opens a dlc on a channel bound with BT_DEFER_SETUP, and sends DISC after the socket is accepted. recv() on the accepted socket then hits: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rfcomm_dlc_accept+0x54/0x350 Call Trace: rfcomm_sock_recvmsg+0x1cd/0x230 sock_recvmsg+0x166/0x1c0 __sys_recvfrom+0x20d/0x300 0x10 is the offset of sock in struct rfcomm_session. With this patch the same run completes with recv() returning 0 and no report, and lockdep stays quiet, confirming rfcomm_mutex is still taken before lock_sock on this path as it is on the thread side. | 19 Oct |
| CVE-2026-80760 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255 mgmt_hci_cmd_sync() checks that the message length agrees with params_len but puts no upper bound on it. params_len is __le16 while the parameter length in the HCI command header is a u8: struct hci_command_hdr { __le16 opcode; __u8 plen; } __packed; hci_cmd_sync_alloc() assigns one to the other: hdr->plen = plen; if (plen) skb_put_data(skb, param, plen); so a params_len of 256 leaves plen at 0 while all 256 bytes are still appended. The frame handed to the driver then declares no parameters and carries 256 of them. On a length framed transport such as H:4 the controller takes the trailing bytes as the start of the next packet. The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about 1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands") only made params_len agree with the message length, a value that fits the message but not the header field is still accepted. Reject params_len that does not fit the header field. | 19 Oct |
| CVE-2025-68787 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: netrom: Fix memory leak in nr_sendmsg() syzbot reported a memory leak [1]. When function sock_alloc_send_skb() return NULL in nr_output(), the original skb is not freed, which was allocated in nr_sendmsg(). Fix this by freeing it before return. [1] BUG: memory leak unreferenced object 0xffff888129f35500 (size 240): comm "syz.0.17", pid 6119, jiffies 4294944652 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(.... backtrace (crc 1456a3e4): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4983 [inline] slab_alloc_node mm/slub.c:5288 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671 sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965 sock_alloc_send_skb include/net/sock.h:1859 [inline] nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x293/0x2a0 net/socket.c:1195 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0x143/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | 15 Oct |
| CVE-2025-68291 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose(). syzbot reported divide-by-zero in __tcp_select_window() by MPTCP socket. [0] We had a similar issue for the bare TCP and fixed in commit 499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0"). Let's apply the same fix to mptcp_do_fastclose(). [0]: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6068 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:__tcp_select_window+0x824/0x1320 net/ipv4/tcp_output.c:3336 Code: ff ff ff 44 89 f1 d3 e0 89 c1 f7 d1 41 01 cc 41 21 c4 e9 a9 00 00 00 e8 ca 49 01 f8 e9 9c 00 00 00 e8 c0 49 01 f8 44 89 e0 99 <f7> 7c 24 1c 41 29 d4 48 bb 00 00 00 00 00 fc ff df e9 80 00 00 00 RSP: 0018:ffffc90003017640 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88807b469e40 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003017730 R08: ffff888033268143 R09: 1ffff1100664d028 R10: dffffc0000000000 R11: ffffed100664d029 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000055557faa0500(0000) GS:ffff888126135000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64a1912ff8 CR3: 0000000072122000 CR4: 00000000003526f0 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:281 [inline] __tcp_transmit_skb+0xbc7/0x3aa0 net/ipv4/tcp_output.c:1568 tcp_transmit_skb net/ipv4/tcp_output.c:1649 [inline] tcp_send_active_reset+0x2d1/0x5b0 net/ipv4/tcp_output.c:3836 mptcp_do_fastclose+0x27e/0x380 net/mptcp/protocol.c:2793 mptcp_disconnect+0x238/0x710 net/mptcp/protocol.c:3253 mptcp_sendmsg_fastopen+0x2f8/0x580 net/mptcp/protocol.c:1776 mptcp_sendmsg+0x1774/0x1980 net/mptcp/protocol.c:1855 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3bd/0x520 net/socket.c:2244 __do_sys_sendto net/socket.c:2251 [inline] __se_sys_sendto net/socket.c:2247 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2247 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66e998f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff9acedb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f66e9be5fa0 RCX: 00007f66e998f749 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffff9acee10 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007f66e9be5fa0 R14: 00007f66e9be5fa0 R15: 0000000000000006 </TASK> | 15 Oct |
| CVE-2025-68305 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Prevent race in socket write iter and sock bind There is a potential race condition between sock bind and socket write iter. bind may free the same cmd via mgmt_pending before write iter sends the cmd, just as syzbot reported in UAF[1]. Here we use hci_dev_lock to synchronize the two, thereby avoiding the UAF mentioned in [1]. [1] syzbot reported: BUG: KASAN: slab-use-after-free in mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316 Read of size 8 at addr ffff888077164818 by task syz.0.17/5989 Call Trace: mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316 set_link_security+0x5c2/0x710 net/bluetooth/mgmt.c:1918 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 sock_write_iter+0x279/0x360 net/socket.c:1195 Allocated by task 5989: mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 set_link_security+0x557/0x710 net/bluetooth/mgmt.c:1910 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 sock_write_iter+0x279/0x360 net/socket.c:1195 Freed by task 5991: mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 mgmt_index_removed+0x112/0x2f0 net/bluetooth/mgmt.c:9477 hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314 | 14 Oct |
| CVE-2025-40357 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix general protection fault in __smc_diag_dump The syzbot report a crash: Oops: general protection fault, probably for non-canonical address 0xfbd5a5d5a0000003: 0000 [#1] SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead4ead00000018-0xdead4ead0000001f] CPU: 1 UID: 0 PID: 6949 Comm: syz.0.335 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:smc_diag_msg_common_fill net/smc/smc_diag.c:44 [inline] RIP: 0010:__smc_diag_dump.constprop.0+0x3ca/0x2550 net/smc/smc_diag.c:89 Call Trace: <TASK> smc_diag_dump_proto+0x26d/0x420 net/smc/smc_diag.c:217 smc_diag_dump+0x27/0x90 net/smc/smc_diag.c:234 netlink_dump+0x539/0xd30 net/netlink/af_netlink.c:2327 __netlink_dump_start+0x6d6/0x990 net/netlink/af_netlink.c:2442 netlink_dump_start include/linux/netlink.h:341 [inline] smc_diag_handler_dump+0x1f9/0x240 net/smc/smc_diag.c:251 __sock_diag_cmd net/core/sock_diag.c:249 [inline] sock_diag_rcv_msg+0x438/0x790 net/core/sock_diag.c:285 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5a7/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg net/socket.c:729 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2614 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2668 __sys_sendmsg+0x16d/0x220 net/socket.c:2700 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> The process like this: (CPU1) | (CPU2) ---------------------------------|------------------------------- inet_create() | // init clcsock to NULL | sk = sk_alloc() | | // unexpectedly change clcsock | inet_init_csk_locks() | | // add sk to hash table | smc_inet_init_sock() | smc_sk_init() | smc_hash_sk() | | // traverse the hash table | smc_diag_dump_proto | __smc_diag_dump() | // visit wrong clcsock | smc_diag_msg_common_fill() // alloc clcsock | smc_create_clcsk | sock_create_kern | With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changed in inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc, just remove it. After removing the INET_PROTOSW_ICSK flag, this patch alse revert commit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC") to avoid casting smc_sock to inet_connection_sock. | 14 Oct |
| CVE-2025-68227 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | 14 Oct |
| CVE-2026-74618 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in bm_fill_super(): create a user and a mount namespace in a child, call fsopen("binfmt_misc") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc] CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn Call Trace: get_tree_keyed+0x7d/0xb0 bm_get_tree+0x34/0x90 [binfmt_misc] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. Nothing in bm_fill_super() depends on the two namespaces matching, it derives everything from sb->s_user_ns. | 14 Oct |
| CVE-2026-74619 | unscored | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ovl: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in ovl_fill_super(): create a user and a mount namespace in a child, call fsopen("overlay") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay] CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn Call Trace: get_tree_nodev+0x71/0xa0 ovl_get_tree+0x15/0x20 [overlay] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. ovl_parse_param() already spells a user namespace check this way for Opt_override_creds. | 14 Oct |
634 of 634 · Previous
Download these 634 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.