Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-90425 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | 19 Oct |
| CVE-2026-90379 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | 19 Oct |
| CVE-2026-90000 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declaring a 1-byte output and a 1-byte input report makes hid_report_len() return 2 for each, so alloc_size is 4, while rmi_set_page() -- reached unconditionally at probe time through rmi_input_configured() -- stores writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since readReport lives at writeReport + output_report_size, those stores also corrupt the window the next reply is parsed out of. The read path is worse: the copy length comes from readReport[1], which the device fills in and can be up to 255, and the copy starts at &readReport[2] with no regard for input_report_size, so it runs past the end of the allocation into adjacent slab objects. This does not even need a lying device -- rmi_f01_probe() issues a fixed 21-byte register read, so any device declaring an input report smaller than 23 bytes reads out of bounds even when it answers truthfully. Those bytes become the register values the RMI core acts on: rmi_f01_probe() prints them to the kernel log as the product id and exports them through the mode 0444 sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends them back to the device as the interrupt mask, so an undersized report descriptor leaks heap contents both to unprivileged userspace and to the device itself. The write path has no bound either: rmi_hid_write_block() copies an unbounded len to &writeReport[4], and the largest caller a device can drive at probe time is rmi_driver_set_irq_bits(), whose length is derived from the interrupt source counts the device declares in its Page Description Table. Finally, the read loop cannot terminate on a zero-length reply: such a reply copies nothing and advances neither bytes_read nor bytes_needed, and because a reply did arrive the one second wait_event_timeout() does not fire either, so a device answering 0 forever keeps the loop running inside the probe worker with page_mutex held. khungtaskd does not notice, because every reply wakes the task. Reject reports too small for what the driver builds -- 6 output bytes for the write reports and 3 input bytes for the read handshake -- at probe time, clamp the write and the read copy to the report sizes the device declared, and treat a zero-length reply as an error. A device refused this way is started as an ordinary HID device, like one that does not carry the RMI report ids at all. RMI_DEVICE must not be left set in device_flags on that path, because rmi_input_configured() would then run the RMI setup and reach rmi_set_page(), which writes the writeReport buffer the refusal just skipped allocating. The bit can arrive set: rmi_probe() copies id->driver_data into device_flags before the report checks, and a bind through the new_id sysfs attribute can supply driver_data with RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the three jumps to start that predate this patch are covered as well. The error path also clears RMI_READ_DATA_PENDING on its way out, because that flag is what the wait at the top of the loop tests: leaving it set would make every later wait_event_timeout() return immediately on the stale reply and kill the read path for the rest of the device's life. Clamping does not regress working hardware: the read loop already handles ---truncated--- | 19 Oct |
| CVE-2026-89804 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: fix mismatched DMA unmap size for large folios Device-private THP migration maps migration buffers with page_size() and records that length in dma_info->size. For a compound folio page_size() is PAGE_SIZE << order, but two teardown sites still pass a literal PAGE_SIZE to dma_unmap_page(): - nouveau_dmem_migrate_to_ram() on the success path, and - nouveau_dmem_migrate_copy_one() on the copy-error path. For an order > 0 folio this unmaps less than was mapped, leaking the remainder of the IOMMU/IOVA mapping. The other unmap sites, in nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already use the saved size; use it here too. | 19 Oct |
| CVE-2026-89729 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature() clamps its return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller supplies a small stack buffer, such as a single s32, causing an out-of-bounds write. HID core stores parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that require more than one slot per value, guard the total byte count calculation, and clamp each per-value copy to the remaining caller buffer. | 19 Oct |
| CVE-2026-89663 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nfsd: revoke copy-notify stateids before dropping their reference Copy-notify stateids live in the s2s_cp_stateids IDR and on their parent stid's sc_cp_list, pinned by a single membership reference. _free_cpntf_state_locked() only unlinks an entry once its refcount reaches zero, so any revoke path that runs while a concurrent find_cpntf_state()/manage_cpntf_state() holder has elevated cs_count drops the reference without unlinking, leaving the entry discoverable with its membership reference already consumed. A second revoke or a laundromat tick then frees it while the reader still holds the pointer -- a KASAN-detectable use-after-free at the reader's nfs4_put_cpntf_state(). This affected all three revoke paths: - The parent-stid drain (nfs4_free_cpntf_statelist()) repeatedly called _free_cpntf_state_locked() on the first list entry; a holder that had bumped cs_count made it return early, so the next iteration re-decremented and burned the holder's reference. - OFFLOAD_CANCEL (manage_cpntf_state()) and laundromat expiry likewise used _free_cpntf_state_locked() and could drop 2->1 without unlinking. Add revoke_cpntf_state_locked(), which unhashes the entry from the IDR and sc_cp_list first (deferring the final free to any holder), and use it from all three revoke paths. The drain now walks with list_for_each_entry_safe() and revokes each entry unconditionally, so it terminates in one pass per entry regardless of cs_count. The unhash is gated on !list_empty(&cps->cp_list); the idr_remove() gate matters because idr_alloc_cyclic() may have recycled the so_id by then. Keep _free_cpntf_state_locked() for the reference-holder put path only, where a concurrent revoke may already have unlinked the entry (its list_del_init() then a no-op). | 19 Oct |
| CVE-2026-89626 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attributes() creates one sysfs group for each custom sensor field. If sysfs_create_group() fails after some groups have already been created, the function returns the error without removing the previously created groups. Add a local unwind path to remove the groups that were already created. With enable_sensor exposed only after the field attributes are ready, this path can free sensor_inst->fields without leaving enable_sensor able to access pointers into that array. | 19 Oct |
| CVE-2026-89513 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Fix PMU event info array size overflow SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo) in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010 truncate to 16. KVM then allocates one entry but loops over the original num_events, causing out-of-bounds reads and writes. A nested guest triggered: BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 Read of size 4 at addr ff600000074d46b0 by task init/1 Call Trace: [<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142 [<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268 [<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 [<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540 [<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80 Allocated by task 1: __kmalloc_noprof+0x19e/0x4b0 kvm_riscv_vcpu_pmu_event_info+0x72/0x142 kvm_sbi_ext_pmu_handler+0xca/0x268 kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6 kvm_riscv_vcpu_exit+0x48c/0x540 kvm_arch_vcpu_ioctl_run+0x37e/0xc80 The buggy address is located 0 bytes to the right of allocated 16-byte region [ff600000074d46a0, ff600000074d46b0) Store the shared-memory size in size_t and reject multiplication overflow. Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings. Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index to match num_events. | 19 Oct |
| CVE-2026-80989 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using. Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry on stale state. | 19 Oct |
| CVE-2026-80914 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise. | 19 Oct |
| CVE-2026-80683 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: give the socket its own sco_conn reference sco_conn_del() drops a reference it does not own. It takes one transient reference via sco_conn_hold_unless_zero() and releases it with the sco_conn_put() that follows sco_sock_hold(); the additional put in the !sk branch releases a second one: conn = sco_conn_hold_unless_zero(conn); ... sk = sco_sock_hold(conn); sco_conn_unlock(conn); sco_conn_put(conn); if (!sk) { sco_conn_put(conn); return; } When close() races the controller's Disconnection Complete, sco_chan_del() clears conn->sk and drops the socket's reference while sco_conn_del() is running. sco_conn_del() then sees sk == NULL, its own put drops the count to zero and frees the conn, and the second put writes to the freed kref: BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190 Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413 Workqueue: hci1 hci_rx_work Call Trace: sco_conn_put.part.0+0x1a/0x190 hci_disconn_complete_evt+0x1ee/0x3e0 hci_event_packet+0x54a/0x650 hci_rx_work+0x321/0x3d0 Allocated by task 413: sco_conn_add+0x72/0x1a0 sco_connect_cfm+0x88/0x670 Freed by task 413: sco_conn_del.isra.0+0x3f/0xf0 hci_disconn_complete_evt+0x1ee/0x3e0 refcount_t: underflow; use-after-free. The root cause is that the socket stores the connection without holding a reference of its own. __sco_chan_add() does: sco_pi(sk)->conn = conn; so the socket borrows whatever reference its caller happened to hold, and the callers paper over that with ad-hoc holds and puts. Give the socket a counted reference instead: __sco_chan_add() takes one and it is released together with the channel (sco_chan_del()) and in sco_sock_destruct(). With the socket holding its own reference, sco_conn_del() no longer needs the extra put and the redundant hold in sco_conn_ready() goes away. Making the socket own its reference means the connection is now actually freed on the error paths of sco_connect() where it used to leak, which in turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the hci_conn accounting balanced, make that ownership explicit as well: sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for its lifetime. sco_connect() hands over the reference returned by hci_connect_sco() and no longer drops it on the error paths; sco_connect_cfm(), which is not given a reference, takes one with hci_conn_hold() before handing it to sco_conn_add() (and drops it again if the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready() is removed. Every reference then has a single, clear owner. | 16 Oct |
| CVE-2026-74615 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <[email protected]> | 16 Oct |
| CVE-2026-74508 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. | 16 Oct |
| CVE-2026-74488 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each subframe it passes the subframe data pointer to mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the length of the A-MSDU parent, instead of rx_skb->len: rx_skb = __skb_dequeue(&list); rx_hdr = (struct rx_packet_hdr *)rx_skb->data; if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) && ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) { mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr, skb->len); } The parent is not a valid description of that buffer, and may not be valid memory at all. ieee80211_amsdu_to_8023s() ends with if (!reuse_skb) dev_kfree_skb(skb); and it only sets reuse_skb when the parent is linear, is not a head_frag, and is being consumed as the *last* subframe. So when the parent does not qualify for reuse it has already been freed, and the read of skb->len is a use-after-free. When it is reused, skb->len is the length of the last subframe, applied to every earlier subframe, which over-states the buffer whenever an earlier subframe is shorter. The callee cannot absorb a wrong length, because it derives its own ceiling from the value it is given. Each frame type computes ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN; and the element walk is then bounded entirely against that ceiling, for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) { u8 ie_len = pos[1]; if (pos + 2 + ie_len > end) break; so a too-large len moves end past the end of the subframe and the walk reads and copies beyond it. The A-MSDU layout is chosen by the sender, which makes the difference between the last subframe and a shorter earlier one remotely selectable. Reaching this requires TDLS support in firmware and the TDLS ethertype on the subframe. The other caller, mwifiex_process_rx_packet(), is correct: it passes a pointer and a length that describe the same region of the RX buffer. Pass rx_skb->len, the length of the subframe actually being parsed. | 16 Oct |
| CVE-2026-74443 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | 16 Oct |
| CVE-2026-74300 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses. | 16 Oct |
| CVE-2026-72157 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). | 16 Oct |
| CVE-2026-72136 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | 16 Oct |
| CVE-2026-72124 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | 16 Oct |
| CVE-2026-54525 | 8.8 high | 0.00% | no CPE yet | Markdown Preview Enhanced is a Markdown preview extension for Visual Studio Code. Prior to 0.8.28, Markdown Preview Enhanced preview-link handling passes a decoded, Markdown-controlled link target to a Windows file-opening helper that invokes child_process.exec with the start command. When a Windows user opens an untrusted Markdown file and clicks a crafted external or unsupported-scheme link, shell metacharacters in the decoded target are interpreted by cmd.exe as command separators, allowing an attacker-selected command to run with the privileges of the current VS Code user. The attack requires one normal preview-link click but does not require malicious workspace configuration, script execution to be enabled, or additional files. This issue is fixed in version 0.8.28. | 16 Oct |
| CVE-2025-68226 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix incomplete backport in cfids_invalidation_worker() The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()") was an incomplete backport and missed one kref_put() call in cfids_invalidation_worker() that should have been converted to close_cached_dir(). | 15 Oct |
| CVE-2025-40362 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: ceph: fix multifs mds auth caps issue The mds auth caps check should also validate the fsname along with the associated caps. Not doing so would result in applying the mds auth caps of one fs on to the other fs in a multifs ceph cluster. The bug causes multiple issues w.r.t user authentication, following is one such example. Steps to Reproduce (on vstart cluster): 1. Create two file systems in a cluster, say 'fsname1' and 'fsname2' 2. Authorize read only permission to the user 'client.usr' on fs 'fsname1' $ceph fs authorize fsname1 client.usr / r 3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2' $ceph fs authorize fsname2 client.usr / rw 4. Update the keyring $ceph auth get client.usr >> ./keyring With above permssions for the user 'client.usr', following is the expectation. a. The 'client.usr' should be able to only read the contents and not allowed to create or delete files on file system 'fsname1'. b. The 'client.usr' should be able to read/write on file system 'fsname2'. But, with this bug, the 'client.usr' is allowed to read/write on file system 'fsname1'. See below. 5. Mount the file system 'fsname1' with the user 'client.usr' $sudo bin/mount.ceph [email protected]=/ /kmnt_fsname1_usr/ 6. Try creating a file on file system 'fsname1' with user 'client.usr'. This should fail but passes with this bug. $touch /kmnt_fsname1_usr/file1 7. Mount the file system 'fsname1' with the user 'client.admin' and create a file. $sudo bin/mount.ceph [email protected]=/ /kmnt_fsname1_admin $echo "data" > /kmnt_fsname1_admin/admin_file1 8. Try removing an existing file on file system 'fsname1' with the user 'client.usr'. This shoudn't succeed but succeeds with the bug. $rm -f /kmnt_fsname1_usr/admin_file1 For more information, please take a look at the corresponding mds/fuse patch and tests added by looking into the tracker mentioned below. v2: Fix a possible null dereference in doutc v3: Don't store fsname from mdsmap, validate against ceph_mount_options's fsname and use it v4: Code refactor, better warning message and fix possible compiler warning [ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ] | 15 Oct |
| CVE-2025-40273 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: NFSD: free copynotify stateid in nfs4_free_ol_stateid() Typically copynotify stateid is freed either when parent's stateid is being close/freed or in nfsd4_laundromat if the stateid hasn't been used in a lease period. However, in case when the server got an OPEN (which created a parent stateid), followed by a COPY_NOTIFY using that stateid, followed by a client reboot. New client instance while doing CREATE_SESSION would force expire previous state of this client. It leads to the open state being freed thru release_openowner-> nfs4_free_ol_stateid() and it finds that it still has copynotify stateid associated with it. We currently print a warning and is triggerred WARNING: CPU: 1 PID: 8858 at fs/nfsd/nfs4state.c:1550 nfs4_free_ol_stateid+0xb0/0x100 [nfsd] This patch, instead, frees the associated copynotify stateid here. If the parent stateid is freed (without freeing the copynotify stateids associated with it), it leads to the list corruption when laundromat ends up freeing the copynotify state later. [ 1626.839430] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 1626.842828] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth cfg80211 rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd nfs_acl lockd grace nfs_localio ext4 crc16 mbcache jbd2 overlay uinput snd_seq_dummy snd_hrtimer qrtr rfkill vfat fat uvcvideo snd_hda_codec_generic videobuf2_vmalloc videobuf2_memops snd_hda_intel uvc snd_intel_dspcfg videobuf2_v4l2 videobuf2_common snd_hda_codec snd_hda_core videodev snd_hwdep snd_seq mc snd_seq_device snd_pcm snd_timer snd soundcore sg loop auth_rpcgss vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs 8021q garp stp llc mrp nvme ghash_ce e1000e nvme_core sr_mod nvme_keyring nvme_auth cdrom vmwgfx drm_ttm_helper ttm sunrpc dm_mirror dm_region_hash dm_log iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse dm_multipath dm_mod nfnetlink [ 1626.855594] CPU: 2 UID: 0 PID: 199 Comm: kworker/u24:33 Kdump: loaded Tainted: G B W 6.17.0-rc7+ #22 PREEMPT(voluntary) [ 1626.857075] Tainted: [B]=BAD_PAGE, [W]=WARN [ 1626.857573] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 1626.858724] Workqueue: nfsd4 laundromat_main [nfsd] [ 1626.859304] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1626.860010] pc : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.860601] lr : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.861182] sp : ffff8000881d7a40 [ 1626.861521] x29: ffff8000881d7a40 x28: 0000000000000018 x27: ffff0000c2a98200 [ 1626.862260] x26: 0000000000000600 x25: 0000000000000000 x24: ffff8000881d7b20 [ 1626.862986] x23: ffff0000c2a981e8 x22: 1fffe00012410e7d x21: ffff0000920873e8 [ 1626.863701] x20: ffff0000920873e8 x19: ffff000086f22998 x18: 0000000000000000 [ 1626.864421] x17: 20747562202c3839 x16: 3932326636383030 x15: 3030666666662065 [ 1626.865092] x14: 6220646c756f6873 x13: 0000000000000001 x12: ffff60004fd9e4a3 [ 1626.865713] x11: 1fffe0004fd9e4a2 x10: ffff60004fd9e4a2 x9 : dfff800000000000 [ 1626.866320] x8 : 00009fffb0261b5e x7 : ffff00027ecf2513 x6 : 0000000000000001 [ 1626.866938] x5 : ffff00027ecf2510 x4 : ffff60004fd9e4a3 x3 : 0000000000000000 [ 1626.867553] x2 : 0000000000000000 x1 : ffff000096069640 x0 : 000000000000006d [ 1626.868167] Call trace: [ 1626.868382] __list_del_entry_valid_or_report+0x148/0x200 (P) [ 1626.868876] _free_cpntf_state_locked+0xd0/0x268 [nfsd] [ 1626.869368] nfs4_laundromat+0x6f8/0x1058 [nfsd] [ 1626.869813] laundromat_main+0x24/0x60 [nfsd] [ 1626.870231] process_one_work+0x584/0x1050 [ 1626.870595] worker_thread+0x4c4/0xc60 [ 1626.870893] kthread+0x2f8/0x398 [ 1626.871146] ret_from_fork+0x10/0x20 [ 1626.871422] Code: aa1303e1 aa1403e3 910e8000 97bc55d7 (d4210000) [ 1626.871892] SMP: stopping secondary CPUs | 15 Oct |
| CVE-2023-54318 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 | 15 Oct |
| CVE-2023-54071 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use work to update rate to avoid RCU warning The ieee80211_ops::sta_rc_update must be atomic, because ieee80211_chan_bw_change() holds rcu_read lock while calling drv_sta_rc_update(), so create a work to do original things. Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x571/0x5d0 CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE Workqueue: phy3 ieee80211_chswitch_work [mac80211] RIP: 0010:rcu_note_context_switch+0x571/0x5d0 Call Trace: <TASK> __schedule+0xb0/0x1460 ? __mod_timer+0x116/0x360 schedule+0x5a/0xc0 schedule_timeout+0x87/0x150 ? trace_raw_output_tick_stop+0x60/0x60 wait_for_completion_timeout+0x7b/0x140 usb_start_wait_urb+0x82/0x160 [usbcore usb_control_msg+0xe3/0x140 [usbcore rtw_usb_read+0x88/0xe0 [rtw_usb rtw_usb_read8+0xf/0x10 [rtw_usb rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core drv_sta_rc_update+0x7c/0x160 [mac80211 ieee80211_chan_bw_change+0xfb/0x110 [mac80211 ieee80211_change_chanctx+0x38/0x130 [mac80211 ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211 ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211 ieee80211_chswitch_work+0x95/0x170 [mac80211 process_one_work+0x201/0x410 worker_thread+0x4a/0x3b0 ? process_one_work+0x410/0x410 kthread+0xe1/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> | 15 Oct |
| CVE-2022-50880 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- | 15 Oct |
| CVE-2025-40282 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: reset link-local header on ipv6 recv path Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW Add missing skb_reset_mac_header() for uncompressed ipv6 RX path. For the compressed one, it is done in lowpan_header_decompress(). Log: (BlueZ 6lowpan-tester Client Recv Raw - Success) ------ kernel BUG at net/core/skbuff.c:212! Call Trace: <IRQ> ... packet_rcv (net/packet/af_packet.c:2152) ... <TASK> __local_bh_enable_ip (kernel/softirq.c:407) netif_rx (net/core/dev.c:5648) chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359) ------ | 15 Oct |
| CVE-2026-74561 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop replace without holding nh->lock, racing the unlocked IPv6 route add/delete that mutate the list under nh->lock and free fib6_info entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()): BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243) Read of size 8 at addr ffff888012953e18 by task exploit/146 nh_rt_cache_flush (net/ipv4/nexthop.c:2243) replace_nexthop (net/ipv4/nexthop.c:2610) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) Unlike the other f6i_list walks, this one bumps each route's sernum via fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock around it would invert the established tb6_lock -> nh->lock order and deadlock. As the only purpose is to invalidate cached dsts, bump the IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead, mirroring the rt_cache_flush() already done for IPv4 just above. | 15 Oct |
| CVE-2026-74655 | 8.8 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. | 14 Oct |
| CVE-2026-76842 | 8.8 high | 0.00% | no CPE yet | The Mercado Pago Node.js SDK interpolates caller-supplied identifiers into API request paths without percent-encoding them, so characters that are structural in a URL survive into the outgoing request. The payment (get, capture, cancel), paymentRefund (create, total, list, get), advancedPayment (get, capture, cancel, update, updateReleaseDate) and disbursementRefund (create, createAll, listAll) clients build their path as a template literal, for example RestClient.fetch(`/v1/payments/${id}`, ...) in src/clients/payment/get/index.ts. A dot-dot or slash sequence in the identifier is normalised by the WHATWG URL parser and redirects the request to a different endpoint, and a question mark appends attacker-chosen query parameters, in both cases carrying the merchant's own access token. An application that forwards an identifier influenced by an untrusted party into one of these methods without an ownership check therefore allows that party to reach other resources within the merchant's token scope. The repository already contains the intended helper, encodePathParam in src/utils/path.ts, which pull request 451 applied to roughly 29 other clients while leaving these unchanged. | 14 Oct |
| CVE-2026-103694 | 8.8 high | 0.00% | no CPE yet | The Mobile builder WordPress plugin through 1.4.2 does not properly restrict which user meta keys a logged-in user can update through one of its REST routes, allowing any user with a self-registered account, such as a customer, to grant themselves the administrator role. | 13 Oct |
| CVE-2026-88903 | 8.8 high | 0.00% | no CPE yet | The Topcontent WordPress plugin through 1.2.1 does not properly authorise one of its request handlers and disables HTML sanitisation before storing the submitted content, allowing unauthenticated attackers to publish arbitrary posts containing malicious JavaScript on any site where its API key has never been configured. | 13 Oct |
| CVE-2026-19570 | 8.8 high | 0.00% | no CPE yet | The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets. The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed. A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant. The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. | 9 Oct |
| CVE-2026-116870 | 8.7 high | 0.00% | no CPE yet | In affected versions of Octopus Server, OIDC token issuer validation was performed inconsistently. This could result in a token issued from a suitably configured non legitimate issuer being accepted as a token belonging to a service account from a legitimate trusted issuer. Exploitation requires a service account with at least one OIDC identity configured. An attacker would also need to know or guess some details of that identity in order to be in a position to attempt exploitation. | Tue 27 Oct |
| CVE-2026-41146 | 8.7 high | 0.00% | no CPE yet | facil.io is a C micro-framework for web applications. Prior to commit 5128747363055201d3ecf0e29bf0a961703c9fa0, `fio_json_parse` can enter an infinite loop when it encounters a nested JSON value starting with `i` or `I`. The process spins in user space and pegs one CPU core at ~100% instead of returning a parse error. Because `iodine` vendors the same parser code, the issue also affects `iodine` when it parses attacker-controlled JSON. The smallest reproducer I found is `[i`. The quoted-value form that originally exposed the issue, `[""i`, reaches the same bug because the parser tolerates missing commas and then treats the trailing `i` as the start of another value. Commit 5128747363055201d3ecf0e29bf0a961703c9fa0 fixes the issue. | Mon 26 Oct |
| CVE-2026-35554 | 8.7 high | 0.00% | apache, kafka | A race condition in the Apache Kafka Java producer client’s buffer pool management can cause messages to be silently delivered to incorrect topics. When a produce batch expires due to delivery.timeout.ms while a network request containing that batch is still in flight, the batch’s ByteBuffer is prematurely deallocated and returned to the buffer pool. If a subsequent producer batch—potentially destined for a different topic—reuses this freed buffer before the original network request completes, the buffer contents may become corrupted. This can result in messages being delivered to unintended topics without any error being reported to the producer. Data Confidentiality: Messages intended for one topic may be delivered to a different topic, potentially exposing sensitive data to consumers who have access to the destination topic but not the intended source topic. Data Integrity: Consumers on the receiving topic may encounter unexpected or incompatible messages, leading to deserialization failures, processing errors, and corrupted downstream data. This issue affects Apache Kafka versions ≤ 3.9.1, ≤ 4.0.1, and ≤ 4.1.1. Kafka users are advised to upgrade to 3.9.2, 4.0.2, 4.1.2, 4.2.0, or later to address this vulnerability. | Mon 26 Oct |
| CVE-2026-4682 | 8.7 high | 0.00% | no CPE yet | Certain HP DeskJet All in One devices may be vulnerable to remote code execution caused by a buffer overflow when specially crafted Web Services for Devices (WSD) scan requests are improperly validated and handled by the MFP. WSD Scan is a Microsoft Windows–based network scanning protocol that allows a PC to discover scanners (and MFPs) on a network and send scan jobs to them without requiring vendor specific drivers or utilities. | Mon 26 Oct |
| CVE-2026-32689 | 8.7 high | 0.00% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix allows a denial of service via the long-poll transport's NDJSON body handling. In 'Elixir.Phoenix.Transports.LongPoll':publish/4, when a POST request is received with Content-Type: application/x-ndjson, the request body is split on newline characters using String.split/2 with no limit on the number of resulting segments. An attacker can send a body consisting entirely of newline bytes, causing a 1:1 amplification into a list of empty binaries — a 1 MB body produces approximately one million list elements, an 8 MB body approximately 8.4 million. Each element is then walked by Enum.map, materializing another list of the same size. This exhausts BEAM memory and schedulers, crashing the node and terminating all active sessions. A session token required to reach the vulnerable endpoint is freely obtainable by any client via an unauthenticated GET request to the same URL with a matching Origin header, making this attack effectively unauthenticated. This issue affects phoenix: from 1.7.0 before 1.7.22 and 1.8.6. | Mon 26 Oct |
| CVE-2026-116201 | 8.7 high | 0.00% | snipeitapp, snipe-it | Snipe-IT before 8.5.0 contains a SAML assertion replay vulnerability that allows attackers to reuse captured assertions by exploiting a non-atomic nonce check in the SAML acs handler. Attackers can send concurrent POST requests to /saml/acs with one captured assertion to obtain multiple authenticated victim sessions that evade IdP-driven revocation. | Mon 26 Oct |
| CVE-2026-77053 | 8.7 high | 0.00% | no CPE yet | boneIO Black firmware ships with authentication disabled by default. Its management web API listens on all network interfaces and exposes all endpoints without requiring credentials. An unauthenticated remote attacker can fully control the device, causing denial of service, modifying configuration, and operating connected physical circuits. This issue was fixed in version 1.6.0: a device without an administrator account refuses API requests until the owner creates one in the first-run wizard, and every API route is restricted to an authenticated role. Versions before 1.2.0 are based on Debian 10, are no longer supported and cannot be upgraded in place; affected devices should be re-flashed with the 1.6.0 system image. | Mon 26 Oct |
| CVE-2026-44700 | 8.7 high | 0.00% | no CPE yet | Elixir WebRTC is an Elixir implementation of the W3C WebRTC API. Prior to 0.15.1 and 0.16.1, missing DTLS peer certificate fingerprint validation in the DTLS client (active) role removes one side of WebRTC's mutual authentication. The bug is not independently exploitable for media interception in standard deployments, but enables a full man-in-the-middle attack when chained with insecure signalling or a peer with similar validation gaps. This vulnerability is fixed in 0.15.1 and 0.16.1. | Mon 26 Oct |
| CVE-2026-58165 | 8.7 high | 0.00% | no CPE yet | OpenZiti through 2.0.0, fixed in commit 3027fdf, contains a privilege escalation vulnerability that allows authenticated non-admin identities with fine-grained enrollment management permissions to create enrollments for any identity, including the default administrator, because the ApplyCreate function in controller/model/enrollment_manager.go verifies only that the target identity exists without performing authorization checks binding the caller to the target identity. Attackers can redeem the resulting one-time token through the unauthenticated client API enrollment endpoint to obtain a client certificate authenticating as the targeted admin identity, yielding full administrative control of the controller and the zero-trust overlay it manages. | Sun 25 Oct |
| CVE-2026-56810 | 8.7 high | 0.00% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint (Mint.HTTP1 module) allows a denial of service via an oversized chunked transfer-encoded response. This vulnerability is associated with program files lib/mint/http1.ex and program routines 'Elixir.Mint.HTTP1':decode_body/5, 'Elixir.Mint.HTTP1':add_body_to_buffer/2. When Mint decodes a chunked HTTP response body, it accumulates each partial fragment of the current chunk in the connection's data_buffer (an unbounded iolist) via add_body_to_buffer/2 and does not emit the data to the caller until the full declared chunk length has been received. The chunk size is taken directly from the server and parsed with no upper bound, so a malicious or compromised server can announce one enormous chunk (for example a size line of 7FFFFFFF, about 2 GiB) and then send the body bytes slowly without ever completing the chunk. The client buffers every received byte while it waits for a completion that never arrives, and because no data responses are produced until the chunk finishes, a caller that otherwise streams large content-length bodies safely gains no protection. An unauthenticated remote server (reachable whenever a client follows redirects, fetches user-supplied URLs, or processes webhooks) can drive the client's memory arbitrarily high and trigger an out-of-memory condition. This issue affects mint: from 0.5.0 before 1.9.1. | Sun 25 Oct |
| CVE-2026-44174 | 8.7 high | 0.00% | no CPE yet | Kirby is an open-source content management system. Prior to 4.9.1 and 5.4.1, Kirby did not validate the model attributes that were used in its collection queries, allowing attackers to include arbitrary model methods in their queries. This includes methods with sensitive data such as password() (disclosing the password hash) or root() (disclosing the absolute filesystem path on the server) as well as methods that perform impactful actions such as loginPasswordless() (causing a privilege escalation to another user) or delete() (deleting all queried models in one go if the authenticated user has appropriate permissions). This issue has been fixed in versions 4.9.1 and 5.4.1. | 24 Oct |
| CVE-2026-65623 | 8.7 high | 0.00% | no CPE yet | Inefficient Algorithmic Complexity vulnerability in mtrudel bandit allows unauthenticated remote denial of service via CPU exhaustion during WebSocket fragment reassembly. The size guard 'Elixir.Bandit.WebSocket.Connection':oversize_message?/2 called from handle_frame/3 in lib/bandit/websocket/connection.ex appends each non-final continuation frame to a left-nested iolist and then re-measures the entire accumulated buffer with IO.iodata_length/1 on every frame. Because the buffer grows by one element per frame and is fully re-traversed each time, reassembly work is quadratic (O(n^2)) in the number of continuation frames. The max_fragmented_message_size limit (default 8 MB) bounds total bytes but not frame count, and each frame can carry as little as one payload byte, so an attacker can send millions of tiny continuation frames using modest bandwidth to pin a CPU core for minutes to hours. Many concurrent connections can starve the whole server of CPU, denying service to legitimate users. The WebSocket read timeout does not help, because it is an idle timeout evaluated between reads and cannot preempt the synchronous reassembly work spent inside a single callback. This issue affects bandit: from 1.11.0 before 1.12.1. | 24 Oct |
| CVE-2026-105937 | 8.7 high | 0.00% | no CPE yet | Apache Pulsar shadow topics (PIP-180) are topics that read the stored messages of a source topic from that topic's managed ledger. The source topic is selected by setting the reserved topic property PULSAR.SHADOW_SOURCE. The admin REST API accepts this property when creating a non-partitioned or partitioned topic and when updating the properties of an existing topic. On these paths the broker authorizes the caller only against the topic being created or updated. It does not authorize the caller against the source topic named in the property. The existing authorization for shadow topic configuration (the SHADOW_TOPIC topic policy on the source topic) is applied only to the source-side shadow topics admin API, not to these paths. As a result, an authenticated user who is allowed to create topics or update topic properties in one tenant can bind a topic in that tenant to a persistent topic in any other tenant. With the default authorization provider, these operations require the tenant admin role for the user's own tenant. The user does not need any permission on the source topic, its namespace or its tenant. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different. The user can then consume from the shadow topic, using only permissions on their own topic, and receive retained messages that were published to the source topic in the other tenant. Exposure is limited to messages that are still retained and readable in the source topic's ledgers; messages protected with client-side end-to-end encryption cannot be decrypted without the encryption keys. A producer on the shadow topic can also register a new schema version under the source topic's schema, subject to the schema compatibility settings; existing schema versions are not replaced. In addition, the shadow topic's managed ledger applies its own retention, trimming, offloading and deletion to the source topic's ledgers. This can permanently delete the source topic's ledger data from BookKeeper and from tiered storage, regardless of the source topic's own subscriptions and retention policy, including messages that have not yet been acknowledged. Deleting the shadow topic can also delete the source topic's ledgers. This data loss can also affect shadow topics that were configured intentionally by administrators. This issue affects Apache Pulsar versions from 3.0.0 before 4.0.14 and from 4.1.0 before 4.2.5. Apache Pulsar 2.x releases do not contain the shadow topic implementation. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. In the fixed versions, shadow topics are disabled by default and are controlled by the new broker configuration setting enableShadowTopics (default false). While it is disabled, the broker rejects creating shadow topics, setting the PULSAR.SHADOW_SOURCE property, and loading or replicating to existing shadow topics. Deployments that use shadow topics must set enableShadowTopics=true in the broker configuration of all brokers after upgrading; otherwise existing shadow topics will not be loaded. When shadow topics are enabled, binding a shadow topic to a source topic in a different tenant requires the superuser role. The fixed versions also prevent a shadow topic from deleting or trimming the ledgers and offloaded data of its source topic. Affected versions provide no configuration option to disable shadow topics. Users who cannot upgrade immediately can reduce exposure by granting the tenant admin role only to trusted principals. | 23 Oct |
| CVE-2026-111810 | 8.7 high | 0.00% | no CPE yet | Apache Traffic Server 9.2.15, 10.1.4 and 10.2.0 write one unthrottled diagnostic log line for every internal @ header they strip, so a request carrying many such headers makes the proxy write far more log data than the request contains. This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. | 23 Oct |
| CVE-2026-17600 | 8.7 high | 0.00% | sonatype, nexus_repository_manager | Sonatype Nexus Repository 3 did not immediately terminate a user's active login session or revoke their cached permissions when that user's account was deleted, deactivated, or had its password changed. A user whose account was already logged in at the time of one of these actions could continue using their existing session to interact with the repository as though the account were still active, until that session independently expired. Depending on the permissions previously held, this could allow continued unauthorized access to read, modify, or delete repository content after access was intended to be revoked. | 23 Oct |
| CVE-2026-13505 | 8.7 high | 0.00% | no CPE yet | In Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 1.0.2.7 (1.0.X series), 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series), sensitive key material held by the AES and DESede engines, the SP 800-90A DRBGs, SymmetricSecretKey and the PBKD and scrypt parameter classes was zeroised on garbage collection by overriding Object.finalize. Finalization runs at an unspecified time and in an unspecified order and is serviced by a single finalizer thread, so where objects carrying a finalizer are allocated faster than that thread retires them the pending-finalization queue grows without bound: disposal falls arbitrarily far behind, which can contribute to an OutOfMemoryError under load, and the key material those objects hold stays resident in the heap for as long as they are queued, defeating the purpose of the zeroisation. The behaviour was not a problem on Java 8 or Java 11; it is later JVMs, on which finalization has been deprecated and progressively de-emphasised, where it becomes one. Disposal of these classes now runs from a java.lang.ref.Cleaner registered in the multi-release jdk1.9 overlay, so on Java 9 and later it no longer depends on the finalizer being scheduled. Bouncy Castle for Java (bcprov) and Bouncy Castle for Java LTS are not affected, as neither implements the finalizer-based zeroisation scheme. | 23 Oct |
| CVE-2026-115325 | 8.7 high | 0.00% | no CPE yet | Netmaker through 1.7.0 contains an authorization bypass vulnerability in the updateExtClient handler that allows network-scoped users to modify external clients on other networks. Attackers with external client permissions on one network can send PUT requests to /api/extclients/{network}/{clientid} to replace public keys, disable clients, and obtain WireGuard private keys. | 23 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.