Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-33451 | 8.5 high | 0.00% | absolute, secure_access | CVE-2026-33451 is an arbitrary read/write vulnerability in the Secure Access Windows client prior to 14.50. Attackers with local control of the Windows client can send malformed data to an API and elevate their level of privilege to system. | Mon 26 Oct |
| CVE-2026-74043 | 8.5 high | 0.00% | no CPE yet | Wazuh from 4.1.1 before 4.14.8 contains a path traversal vulnerability in upload_list_file, upload_rule_file, and upload_decoder_file that allows malicious cluster workers to write files at arbitrary paths. Attackers holding the cluster key can send DistributedAPI requests with ../ sequences in filename, bypassing REST controller validation, to write files as the wazuh user. | Mon 26 Oct |
| CVE-2026-9492 | 8.5 high | 0.00% | no CPE yet | The MBStorage DRAM lighting control module within Gigabyte Control Center (GCC) developed by GIGABYTE Technology has an Improper Access Control vulnerability. Authenticated local attackers can send specific IOCTL commands through the driver MyPortIO_x64.sys bundled with the module, thereby arbitrarily reading and writing physical memory and obtaining kernel-level privileges. | 24 Oct |
| CVE-2026-44175 | 8.5 high | 0.00% | no CPE yet | Kirby is an open-source content management system. In versions prior to 4.9.1 and 5.4.1, Kirby did not securely sanitize the contents of the list field on save, leaving it vulnerable to cross-site scripting (XSS). Kirby's list field stores its formatted content as HTML, and unlike other field types, its HTML special characters cannot be escaped without losing the formatting. Sanitization was only enforced client-side in the Panel, while the server did not sanitize the content on save. As a result, an attacker could bypass the Panel and send malicious HTML directly to Kirby's API, storing unsanitized markup in the content file. That markup would then be rendered on the site frontend and executed in the browsers of site visitors and logged-in users browsing the site, resulting in persistent XSS. This issue has been fixed in versions 4.9.1 and 5.4.1. | 24 Oct |
| CVE-2026-67428 | 8.5 high | 0.00% | no CPE yet | Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.7, HTTP-emitting modules including src/core/modules/third_party/developer/http/requests.py, core.api.http_get, core.api.http_post, graphql.query, graphql.mutation, monitor.http_check, communication.slack_send, notification.discord.send_message, notification.slack.send_message, notification.teams.send_message, ai.vision_analyze, verify.visual_diff, browser.proxy_rotate, and the agent and llm inline base_url branch fetch caller-controlled URLs without validate_url_with_env_config, allowing SSRF to internal or metadata endpoints. This issue is fixed in version 2.26.7. | 24 Oct |
| CVE-2026-76840 | 8.5 high | 0.00% | no CPE yet | RustDesk's Windows clipboard redirection copies a peer-supplied length into a fixed-size caller buffer without an upper bound check. When an OLE paste consumer such as explorer.exe calls IStream::Read with a buffer of cb bytes, CliprdrStream_Read in libs/clipboard/src/windows/wf_cliprdr.c requests that many bytes of a remote file through cliprdr_send_request_filecontents and then executes CopyMemory(pv, clipboard->req_fdata, clipboard->req_fsize), where req_fsize is taken verbatim from the peer's CLIPRDR FileContentsResponse by wf_cliprdr_server_file_contents_response (req_fsize = fileContentsResponse->cbRequested) and is never clamped to cb anywhere in the chain. The function's only length comparison, req_fsize < cb, handles the short-read case and is evaluated after the copy has already occurred. A malicious or compromised peer that answers a small file-contents read with an oversized response therefore writes attacker-chosen data past the end of the paste consumer's heap buffer when the local user pastes clipboard file contents offered by the remote side. The file is a fork of FreeRDP's client/Windows/wf_cliprdr.c, where the same defect is CVE-2026-68579, fixed in FreeRDP 3.30.0. | 14 Oct |
| CVE-2025-59146 | 8.5 high | 0.00% | no CPE yet | New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. An authenticated Server-Side Request Forgery (SSRF) vulnerability exists in versions prior to 0.9.0.5. A feature within the application allows authenticated users to submit a URL for the server to process its content. The application fails to properly validate this user-supplied URL before making a server-side request. This vulnerability is not limited to image URLs and can be triggered with any link provided to the vulnerable endpoint. Since user registration is often enabled by default, any registered user can exploit this. By crafting a malicious URL, an attacker can coerce the server to send requests to arbitrary internal or external services. The vulnerability has been patched in version 0.9.0.5. The patch introduces a comprehensive, user-configurable SSRF protection module, which is enabled by default to protect server security. This new feature provides administrators with granular control over outbound requests made by the server. For users who cannot upgrade immediately, some temporary mitigation options are available. Enable new-api image processing worker (new-api-worker) and/or configure egress firewall rules. | 8 Oct |
| CVE-2025-65883 | 8.4 high | 0.00% | genexis, platinum_4410_firmware | A vulnerability has been identified in Genexis Platinum P4410 router (Firmware P4410-V2–1.41) that allows a local network attacker to achieve Remote Code Execution (RCE) with root privileges. The issue occurs due to improper session invalidation after administrator logout. When an administrator logs out, the session token remains valid. An attacker on the local network can reuse this stale token to send crafted requests via the router’s diagnostic endpoint, resulting in command execution as root. | Tue 27 Oct |
| CVE-2026-74033 | 8.4 high | 0.00% | no CPE yet | Wazuh from 4.1.1 before 4.14.8 contains a path traversal vulnerability in the get_lists() and delete_list_file() CDB list handlers that allows compromised cluster workers to read or delete master files. Attackers can send traversal or absolute-path filenames through the internal cluster RPC path, bypassing REST validation and RBAC to delete files like rbac.db. | Mon 26 Oct |
| CVE-2026-11857 | 8.4 high | 0.00% | no CPE yet | Quanos SCHEMA ST4 on-premises contains a local privilege escalation vulnerability in the Client Update Service due to insecure deserialization in the .NET Remoting service. The service is configured with TypeFilterLevel.Full and is bound to local interfaces only through named pipes. A local authenticated attacker can connect to the local named pipe, obtain the .NET Remoting endpoint, and send specially crafted serialized objects. Successful exploitation results in arbitrary code execution in the context of the update process with NT AUTHORITY\SYSTEM privileges. Network-only exploitation is not possible and local host access with an authenticated user session is required. | 25 Oct |
| CVE-2026-65049 | 8.4 high | 0.00% | no CPE yet | Ninja Forms plugin version 3.14.8 and prior for WordPress Multisite contains an incorrect authorization vulnerability that allows a subsite Administrator to trigger network-wide deletion of all Ninja Forms data by exploiting a site-scoped capability check combined with unsafe multisite migration defaults. Attackers can send a crafted POST request to the admin-ajax.php endpoint with the nf_delete_all_data action and a per-site nonce to invoke migration routines that unconditionally iterate all blogs via switch_to_blog(), dropping all nf3_* tables and clearing options and transients across every subsite in the network without requiring super-admin or network-admin privileges. | 24 Oct |
| CVE-2026-54200 | 8.4 high | 0.00% | no CPE yet | Tobit Laboratories AG TeamDavid's Webbox is vulnerable to a local file inclusion vulnerability in the send email, fax, SMS, etc. functionality. By specifying an '@@attach' command in the form field 'scjob', files can be attached to a message, which can then be downloaded by an authenticated user. A filter is in place that restricts access to the David con-fig folder and the user folder. However, this filter can be bypassed by specifying an alternate data stream, allowing the download of sensitive files such as other users' access files containing their passwords or the server's private key. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | 24 Oct |
| CVE-2026-12070 | 8.4 high | 0.00% | no CPE yet | Tobit Laboratories AG TeamDavid's Webbox is vulnerable to an arbitrary file deletion vulnerability in the send email, fax, SMS, etc. functionality. By specifying an @@COMMENTFILE command in the form field scjob, any file on the system can be deleted. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. | 23 Oct |
| CVE-2026-80932 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush. | 19 Oct |
| CVE-2025-64325 | 8.4 high | 0.00% | emby | Emby Server is a personal media server. Prior to version 4.8.1.0 and prior to Beta version 4.9.0.0-beta, a malicious user can send an authentication request with a manipulated X-Emby-Client value, which gets added to the devices section of the admin dashboard without sanitization. This issue has been patched in version 4.8.1.0 and Beta version 4.9.0.0-beta. | 18 Oct |
| CVE-2026-74589 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership. | 16 Oct |
| CVE-2026-74256 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop. | 16 Oct |
| CVE-2026-72183 | 8.4 high | 0.00% | no CPE yet | In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). For a process group (PIDTYPE_PGID) pid_task() returns only one member; recording is skipped whenever that member shares the caller's thread group, and hook_file_send_sigiotask() then lets the signal fan out to the whole group unchecked. Record the domain for every non single-process target so the scope is enforced against each group member at delivery time. That recording is necessary but not sufficient on its own: the kernel signals a process group through its members' thread-group leaders, and the leader of the registrant's own process can carry a different Landlock domain than the sibling thread that armed the owner. domain_is_scoped() would then deny that leader, even though commit 18eb75f3af40 ("landlock: Always allow signals between threads of the same process") requires same-process delivery to be allowed. hook_task_kill() avoids this by evaluating same_thread_group() live, per recipient; the SIGIO path instead delegates the whole decision to a single registration-time check, which a process-group fan-out cannot honor. So also record the registrant's thread group next to its domain and exempt it at delivery: hook_file_send_sigiotask() allows the signal whenever the recipient belongs to the registrant's own process, restoring the same-process guarantee while keeping out-of-domain group members blocked. The direct kill() path (hook_task_kill) already evaluates the live domain and is unaffected. [mic: Check pid_type earlier and improve comment, fix commit message, fix comment formatting] | 16 Oct |
| CVE-2026-110255 | 8.4 high | 0.00% | no CPE yet | Finsys Dockhand before 1.0.43 contains a response-disclosing server-side request forgery vulnerability that allows authenticated users to make the server fetch arbitrary URLs by supplying repository URL and stackfile values. Attackers can send stack templates pointing to internal services or cloud metadata endpoints and read the fetched content from the compose response field, exposing credentials and tokens. | 13 Oct |
| CVE-2026-84170 | 8.3 high | — | apache software foundation, apache wicket | Allocation of resources without limits or throttling in Apache Wicket. org.apache.wicket.markup.html.form.upload.resource.AbstractFileUploadResource is the server side of the form-less upload offered by FileUploadToResourceField, which posts the selected files to a separately mounted resource rather than through a Form. The resource is an application-wide singleton with no component to consult, so newResourceResponse() takes the three limits that bound the upload - the total request size, the maximum size of a single part and the maximum number of parts - from the request parameters maxSize, fileMaxSize and fileCountMax, and hands them to the multipart parser as they arrive. Nothing binds those numbers to the field that is supposed to be uploading. A request naming a very large maxSize is therefore parsed with no effective ceiling on the total size, and omitting fileMaxSize and fileCountMax leaves the per-part and part-count limits unset as well. The values the application configured through FileUploadToResourceField#setMaxSize(), #setFileMaxSize() and #setFileCountMax() are consulted only when the client omits the corresponding parameter, so against a client that supplies one they have no effect at all. Parts above the parser's in-memory threshold are spooled to the container's temporary directory, and the file parts are then copied into the folder the application's IUploadsFileManager owns, under a sub-folder the request names, where they remain. A part that is not a file is read into the heap in full while the request is parsed. One request, repeatable, can therefore consume as much disk or as much heap as the client chooses to send. The resource carries no authorization annotation and the default authorization strategy permits every resource request, so unless the application authorizes the resource itself the request needs no authentication, no session, no prior page view and no user interaction. An application is affected where it uses FileUploadToResourceField, or mounts FileUploadResourceReference itself. This is not the ordinary upload path: the resource is a singleton that has to be created and mounted deliberately. An application that configures no upload limit at all loses nothing, because Wicket applies no total-size limit of its own by default; what the defect removes is a limit the application set. Uploads through Form with FileUploadField, and through AjaxFileDropBehavior, are not affected, because both read their limits from the component rather than from the request. The upload resource does not exist in the 8.x line. This issue affects Apache Wicket: from 9.14.0 through 9.24.0, from 10.0.0 through 10.9.1. Users are recommended to upgrade to version 9.25.0 or 10.12.0, which fix the issue. | 7 h ago |
| CVE-2026-116180 | 8.3 high | 0.00% | vllm | vLLM from 0.8.5 before 0.31.0 has a denial of service flaw. LogprobsTensors.empty_cpu() in vllm/v1/outputs.py allocates an uninitialized int32 tensor, and the V1 model runner leaves prompt positions reported as computed by a KV connector unwritten. A client sharing the engine can send prompt_logprobs (or echo with logprobs) against a connector-cached prefix, making tokenizer decode raise OverflowError, which crashes EngineCore and drops all co-tenant requests. | Wed 28 Oct |
| CVE-2026-114088 | 8.3 high | 0.00% | no CPE yet | Trigger.dev before 4.5.4 contains a hardcoded default secret vulnerability in the /coordinator Socket.IO namespace that allows unauthenticated attackers to connect using the published coordinator-secret value. Attackers can emit READY_FOR_EXECUTION to retrieve decrypted run environment variables or send TASK_RUN_FAILED_TO_RUN and similar events to tamper with arbitrary runs. | Tue 27 Oct |
| CVE-2026-70388 | 8.3 high | 0.00% | no CPE yet | SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device on the network can send specially crafted messages that cause the master to write data outside allocated memory boundaries. The software performs arithmetic on message length values without proper validation, allowing negative or extremely large values to bypass safety checks. This can corrupt memory and potentially allow an attacker to execute arbitrary code on the master system. | Mon 26 Oct |
| CVE-2026-64649 | 8.3 high | 0.00% | vercel, next.js | Next.js is a React framework for building full-stack web applications. In versions 14.1.1 through 15.5.20 and 16.0.0 through 16.2.10, when a Server Action forwards or redirects a request, an attacker can cause the server to send that outbound request to a malicious host (Server-Side Request Forgery). This requires the attacker's request to control Host-associated headers. In some configurations, it's also possible to obtain internal values that weaken middleware/proxy authorization. Applications that use Server Actions are affected when the incoming host header is not fixed to a trusted value. This typically occurs on custom servers, or on deployments not behind a proxy that pins the host. Managed hosting pins the host upstream and is not affected; next start and standalone output do the same from version 14.2 onward. This issue has been fixed in versions 15.5.21 and 16.2.11. | 24 Oct |
| CVE-2026-67431 | 8.3 high | 0.00% | no CPE yet | MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to 0.23.0, MCP::Server::Transports::StreamableHTTPTransport in the mcp gem does not bind a session ID to a session owner, allowing an attacker with a stolen session ID to send tools/call requests that execute in the victim's session. This issue is fixed in version 0.23.0. | 24 Oct |
| CVE-2026-115376 | 8.3 high | 0.00% | no CPE yet | Incus 7.0.1 before 7.0.2 and 7.2.0 before 7.5.0 contains an authorization bypass vulnerability that allows project-restricted clients to copy volumes by omitting source.type. Attackers can send crafted POST requests to the custom volumes endpoint with a chosen source.project to copy and read other projects' volumes, snapshots, and configuration. | 23 Oct |
| CVE-2026-115723 | 8.3 high | 0.00% | no CPE yet | Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes. | 23 Oct |
| CVE-2026-111880 | 8.3 high | 0.00% | no CPE yet | FreeRDP versions from 2.0.0 before 3.32.0 contain a heap out-of-bounds write in the server hash-callback NTLM path that fails to validate the MIC offset. Unauthenticated attackers can send a crafted AUTHENTICATE_MESSAGE with a backward session-key offset and MIC offset to write 16 zero bytes beyond the allocation. | 19 Oct |
| CVE-2026-118665 | 8.2 high | 0.00% | no CPE yet | GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts retains request.extensions.connectionParams in the closure-scoped executorConnectionParams object after cleanupWebsocket closes a connection. When one executor is reused across different authorization contexts, a later request that omits a sensitive key can send an earlier caller's Authorization or tenant value in its connection_init payload, causing the downstream server to authenticate the later caller as the earlier user. Applications that create a new executor for every request are not affected. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. | Wed 28 Oct |
| CVE-2026-116172 | 8.2 high | 0.00% | vllm | vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobs limits via CandidateTokens.top_n. Attackers can send Generate or GenerateStream requests with oversized or integer-wrapping top_n values to trigger torch.topk failures that terminate EngineCore. | Wed 28 Oct |
| CVE-2026-116173 | 8.2 high | 0.00% | vllm | vLLM from 0.22.0 before 0.24.0 contains a denial of service vulnerability that allows remote attackers to terminate EngineCore by bypassing logprob_token_ids limits in the Rust gRPC frontend. Attackers can send Generate or GenerateStream requests with output_logprobs enabled and more than 128 output_candidates.token_ids, triggering a fatal sampler exception that crashes the engine. | Wed 28 Oct |
| CVE-2026-8466 | 8.2 high | 0.00% | no CPE yet | Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows denial of service via unbounded buffer accumulation in multipart header parsing. cowboy_req:read_part/3 in src/cowboy_req.erl accumulates incoming request bytes into a Buffer binary with no upper-bound check. When cow_multipart:parse_headers/2 returns more or {more, Buffer2}, the function reads up to Length bytes (default 64 KB) from the request body and recurses with the enlarged buffer. There is no equivalent of the byte_size(Acc) > Length guard present in the sibling function read_part_body/4. An unauthenticated attacker can send a multipart/form-data request whose body never yields a complete header section — for example, a body that never contains the advertised boundary delimiter, or one whose header lines never contain \r\n\r\n — and force the server process to accumulate memory linearly with the bytes the protocol layer is willing to deliver. A handful of concurrent such uploads is sufficient to exhaust BEAM memory. This issue affects cowboy from 2.0.0 before 2.15.0. | Mon 26 Oct |
| CVE-2026-79977 | 8.2 high | 0.00% | no CPE yet | The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message(). The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires. A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise. The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default. | Mon 26 Oct |
| CVE-2026-50637 | 8.2 high | 0.00% | pevans, metrics\ | Metrics::Any::Adapter::Statsd versions before 0.04 for Perl does not protect against metric injections. The statsd protocol (and extensions) allow mutiple metrics, separated by newlines, to be sent per packet. The send method does not validate the contents of the metric names or values. If the names have newlines and statsd control characters (colon, pipe) then metric injections are possible. Version 0.04 fixed this by modifying the _make method to block metric names with characters below ASCII 32 (which includes the newline), or colons or pipes. | 25 Oct |
| CVE-2026-55952 | 8.2 high | 0.00% | erlang, erlang\/otp, erlang\/ssl | The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process. An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected. This issue affects OTP from OTP 22.2 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10. | 25 Oct |
| CVE-2026-54423 | 8.2 high | 0.00% | no CPE yet | In OpenStack Ironic before 37.0.1, an Ironic user with the ability to deploy nodes using the IPMI management interface can maliciously use the send_raw step to send arbitrary IPMI commands to a node, bypassing Ironic's access control. | 25 Oct |
| CVE-2026-55641 | 8.2 high | 0.00% | no CPE yet | 9Router is an AI router & token saver. Prior to 0.5.2, 9router determines whether a /v1 LLM proxy request is local by reading the client-controlled Host header, allowing a remote unauthenticated attacker to send Host: localhost and bypass API-key authentication. In the default configuration, this exposes the /v1 proxy to upstream provider calls using stored provider credentials and allows /v1/search with the searxng provider_options.baseUrl parameter to drive server-side requests to internal or cloud-metadata hosts. This issue is fixed in version 0.5.2. | 25 Oct |
| CVE-2026-72766 | 8.2 high | 0.00% | n8n | n8n before 1.123.67, 2.x before 2.31.5, and 2.32.x before 2.32.1 contain a type confusion vulnerability in the Send Email node, which does not enforce that its message fields are strings. A crafted non-string value supplied from a workflow expression into the text or HTML body field can be interpreted by the underlying mail library (Nodemailer) as a file path or URL, allowing arbitrary local file disclosure and server-side request forgery (SSRF). Exploitation requires a pre-existing active workflow with an unauthenticated webhook, valid SMTP credentials configured on the node, and untrusted input mapped directly into the body field; this is not a default configuration. | 24 Oct |
| CVE-2026-67607 | 8.2 high | 0.00% | no CPE yet | LightFTP 2.3.1 contains a residual race condition vulnerability (an incomplete fix for CVE-2024-11144) in the worker_thread_cleanup() function of ftpserv.c that allows remote unauthenticated attackers to destabilize or crash the daemon by triggering unsynchronized access to shared per-connection state without holding the required mutex lock. Attackers can send a data-transfer command such as LIST followed immediately by ABOR to exploit the missing synchronization on shared context and detached thread id reuse, resulting in daemon destabilization or crash which can lead to a denial of service. The 2.3.1 patch only narrowed the timing window (an extra re-check and reordered cleanup), it never added the missing lock, so the underlying race remains. | 23 Oct |
| CVE-2026-110833 | 8.2 high | 0.00% | freerdp | FreeRDP from 3.0.0-beta1 before 3.32.0 fails to enforce cumulative or absolute size limits when reassembling RDPDR channel fragments in the proxy. Attackers can send a FIRST fragment followed by continuation fragments without LAST, growing per-session heap streams proportional to traffic and exhausting proxy memory. | 23 Oct |
| CVE-2026-110830 | 8.2 high | 0.00% | freerdp | FreeRDP before 3.32.0 fails to close prior serial handles in serial_process_irp_create, allowing a malicious RDP server to exhaust file descriptors. Attackers can send repeated serial IRP_MJ_CREATE requests to accumulate descriptors and terminate the client at the CommReadFile FD_SETSIZE assertion. | 23 Oct |
| CVE-2026-64389 | 8.2 high | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication. | 21 Oct |
| CVE-2026-86009 | 8.2 high | 0.00% | no CPE yet | Mailu is a mail server distributed as a set of Docker images. Prior to f05aeb8322e2f61096af6b089d61ba6f40587d96, domain managers can enable spoofing for hosted domains they do not control. A potentially malicious domain administrator enables spoofing for another hosted domain and can send emails that are authenticated with DKIM/SPF for domains they should not be able to. This vulnerability is addressed by f05aeb8322e2f61096af6b089d61ba6f40587d96. | 21 Oct |
| CVE-2026-102465 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
| CVE-2026-43853 | 8.2 high | 0.00% | no CPE yet | A vulnerability could allow an attacker to send a crafted message to trigger an assertion fault, causing the service to crash. | 20 Oct |
| CVE-2026-102462 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mssql-client. | 20 Oct |
| CVE-2026-102463 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError. The impacted component is io.vertx:vertx-pg-client. | 20 Oct |
| CVE-2026-102466 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
| CVE-2026-103223 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-pg-client. | 20 Oct |
| CVE-2026-103224 | 8.2 high | 0.00% | eclipse, vert.x | In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mysql-client. | 20 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-11-01. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.