Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-19937 | 5.7 medium | 0.00% | no CPE yet | The Bluetooth Mesh Access layer delayable-message machinery in subsys/bluetooth/mesh/delayable_msg.c manages a static pool of CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_COUNT message contexts (default 4) threaded onto a free_ctx or busy_ctx list. release_delayable_msg_ctx() returned a context to free_ctx only when sys_slist_find_and_remove() found it on busy_ctx. The chunk-exhaustion error path in bt_mesh_delayable_msg_manage() releases a context that was already popped off free_ctx but not yet inserted on busy_ctx, so the context was appended to neither list and was permanently lost from the pool. Because bt_mesh_delayable_msg_init() runs only once from bt_mesh_init(), and node reset/suspend only drain busy_ctx, the loss survives unprovision, re-provision and suspend/resume — it is cleared only by a reboot. The error path is reached when the chunk pool (CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CHUNK_COUNT, default 40 chunks) is short of the chunks a new delayed message needs and the oldest pending message cannot be flushed because bt_mesh_access_send() returns -EBUSY or -ENOBUFS (all segmented-TX contexts busy, or advertising/segment buffers exhausted). A peer that is provisioned into the mesh network — holding a valid NetKey plus an AppKey or DevKey bound to a server model — can drive both conditions by flooding the victim with requests that elicit segmented responses while withholding the Segment Acknowledgment, which keeps the transmit contexts occupied while queued responses hold the chunk pool. Each further request that arrives in that window leaks one context. Once the pool is drained, bt_mesh_delayable_msg_manage() returns -ENOMEM for every subsequent send and bt_mesh_model_send() propagates that error with no fallback to an immediate transmit. Since CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG and CONFIG_BT_MESH_ACCESS_DELAYABLE_MSG_CTX_ENABLED are both enabled by default, ctx->rnd_delay is set for every received access message, so all replies from Configuration Server, Health Server and application server models are silently dropped. The node keeps receiving and processing traffic but never answers, a persistent denial of service until the device is restarted. There is no memory corruption, information disclosure or integrity impact; releases before the fix compute the chunk count from the transmit buffer capacity rather than its payload length, making chunk-pool starvation — and therefore the leak — considerably easier to provoke. | 14 Oct |
| CVE-2026-8296 | 5.6 medium | 0.00% | no CPE yet | In affected versions of Octopus Server with certain access levels it was possible to embed a Cross-Site Scripting Payload via artifacts. | Mon 26 Oct |
| CVE-2026-39417 | 5.5 medium | 0.00% | maxkb | MaxKB is an open-source AI assistant for enterprise. Versions 2.7.1 and below contain an incomplete fix for CVE-2025-53928, where a Remote Code Execution vulnerability still exists in the MCP node of the workflow engine. MaxKB only restricts the referencing code path (loading MCP config from the database). The else branch, responsible for loading mcp_servers directly from user-supplied JSON remains completely unpatched. Since mcp_source is an optional field (required=False), an attacker can simply omit it or set it to any non-referencing value to bypass the fix. By calling the workflow creation API directly with a crafted JSON payload, an attacker can inject a complete MCP node configuration with stdio transport, arbitrary command, and args — achieving RCE when the workflow is triggered via chat. This issue has been fixed in version 2.8.0. | Mon 26 Oct |
| CVE-2026-40608 | 5.5 medium | 0.00% | dayuanjiang, next_ai_draw.io | Next AI Draw.io is a next.js web application that integrates AI capabilities with draw.io diagrams. Prior to 0.4.15, the embedded HTTP sidecar contains three POST handlers (/api/state, /api/restore, and /api/history-svg) that process incoming requests by accumulating the entire request body into a JavaScript string without any size limitations. Node.js buffers the entire payload in the V8 heap. Sending a sufficiently large body (e.g., 500 MiB or more) will exhaust the process heap memory, leading to an Out-of-Memory (OOM) error that crashes the MCP server. This vulnerability is fixed in 0.4.15. | Mon 26 Oct |
| CVE-2026-98145 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | Mon 26 Oct |
| CVE-2026-45046 | 5.5 medium | 0.00% | no CPE yet | Gryph provides a security layer for AI coding agents. Prior to 0.7.0, Gryph implements logging levels that determine what content is logged to a local sqlite database. The README incorrectly mentions that the default log level is minimal while it is standard. Source code review shows sensitive file-write content remains in the stored payload as ContentPreview, OldString, or NewString at the default standard logging level and at full. This leads to logging of potentially sensitive file content in the local sqlite database, violating Gryphs sensitive file filter and log level contracts. This vulnerability is fixed in 0.7.0. | Mon 26 Oct |
| CVE-2025-37743 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | 21 Oct |
| CVE-2026-45940 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix oops when split header is enabled For GMAC4, when split header is enabled, in some rare cases, the hardware does not fill buf2 of the first descriptor with payload. Thus we cannot assume buf2 is always fully filled if it is not the last descriptor. Otherwise, the length of buf2 of the second descriptor will be calculated wrong and cause an oops: Unable to handle kernel paging request at virtual address ffff00019246bfc0 ... x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000 Call trace: dcache_inval_poc+0x28/0x58 (P) dma_direct_sync_single_for_cpu+0x38/0x6c __dma_sync_single_for_cpu+0x34/0x6c stmmac_napi_poll_rx+0x8f0/0xb60 __napi_poll.constprop.0+0x30/0x144 net_rx_action+0x160/0x274 handle_softirqs+0x1b8/0x1fc ... To fix this, the PL bit-field in RDES3 register is used for all descriptors, whether it is the last descriptor or not. | 21 Oct |
| CVE-2026-23136 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state. | 19 Oct |
| CVE-2025-71286 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls The size of the data behind of scontrol->ipc_control_data for bytes controls is: [1] sizeof(struct sof_ipc4_control_data) + // kernel only struct [2] sizeof(struct sof_abi_hdr)) + payload The max_size specifies the size of [2] and it is coming from topology. Change the function to take this into account and allocate adequate amount of memory behind scontrol->ipc_control_data. With the change we will allocate [1] amount more memory to be able to hold the full size of data. | 19 Oct |
| CVE-2023-53669 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: tcp: fix skb_copy_ubufs() vs BIG TCP David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy using hugepages, and skb length bigger than ~68 KB. skb_copy_ubufs() assumed it could copy all payload using up to MAX_SKB_FRAGS order-0 pages. This assumption broke when BIG TCP was able to put up to 512 KB per skb. We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45 and limit gso_max_size to 180000. A solution is to use higher order pages if needed. v2: add missing __GFP_COMP, or we leak memory. | 15 Oct |
| CVE-2026-45844 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi <[email protected]>. | 15 Oct |
| CVE-2026-43085 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(), consistent with how __build_packet_message() already constructs NFULNL_MSG_PACKET headers. | 15 Oct |
| CVE-2026-31752 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | 15 Oct |
| CVE-2026-31428 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute. | 15 Oct |
| CVE-2026-23310 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded bond_option_mode_set() already rejects mode changes that would make a loaded XDP program incompatible via bond_xdp_check(). However, bond_option_xmit_hash_policy_set() has no such guard. For 802.3ad and balance-xor modes, bond_xdp_check() returns false when xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually absent due to hardware offload. This means a user can: 1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3). 2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded. This leaves bond->xdp_prog set but bond_xdp_check() now returning false for the same device. When the bond is later destroyed, dev_xdp_uninstall() calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering: WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)) Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an XDP program is loaded on a bond in 802.3ad or balance-xor mode. commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") introduced bond_xdp_check() which returns false for 802.3ad/balance-xor modes when xmit_hash_policy is vlan+srcmac. The check was wired into bond_xdp_set() to reject XDP attachment with an incompatible policy, but the symmetric path -- preventing xmit_hash_policy from being changed to an incompatible value after XDP is already loaded -- was left unguarded in bond_option_xmit_hash_policy_set(). Note: commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode") later added a similar guard to bond_option_mode_set(), but bond_option_xmit_hash_policy_set() remained unprotected. | 15 Oct |
| CVE-2026-23303 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials. | 15 Oct |
| CVE-2025-21716 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix uninit-value in vxlan_vnifilter_dump() KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 | 15 Oct |
| CVE-2024-49948 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. | 15 Oct |
| CVE-2024-35944 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host() Syzkaller hit 'WARNING in dg_dispatch_as_host' bug. memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg" at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24) WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237 dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237 Some code commentry, based on my understanding: 544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size) /// This is 24 + payload_size memcpy(&dg_info->msg, dg, dg_size); Destination = dg_info->msg ---> this is a 24 byte structure(struct vmci_datagram) Source = dg --> this is a 24 byte structure (struct vmci_datagram) Size = dg_size = 24 + payload_size {payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32. 35 struct delayed_datagram_info { 36 struct datagram_entry *entry; 37 struct work_struct work; 38 bool in_dg_host_queue; 39 /* msg and msg_payload must be together. */ 40 struct vmci_datagram msg; 41 u8 msg_payload[]; 42 }; So those extra bytes of payload are copied into msg_payload[], a run time warning is seen while fuzzing with Syzkaller. One possible way to fix the warning is to split the memcpy() into two parts -- one -- direct assignment of msg and second taking care of payload. Gustavo quoted: "Under FORTIFY_SOURCE we should not copy data across multiple members in a structure." | 15 Oct |
| CVE-2024-35915 | 5.5 medium | 0.00% | linux, debian, linux_kernel, debian_linux | In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes. | 15 Oct |
| CVE-2025-71305 | 5.5 medium | 0.00% | linux, linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/display/dp_mst: Add protection against 0 vcpi When releasing a timeslot there is a slight chance we may end up with the wrong payload mask due to overflow if the delayed_destroy_work ends up coming into play after a DP 2.1 monitor gets disconnected which causes vcpi to become 0 then we try to make the payload = ~BIT(vcpi - 1) which is a negative shift. VCPI id should never really be 0 hence skip changing the payload mask if VCPI is 0. Otherwise it leads to <7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc [drm_display_helper]] port ffff888126ce9000 (3) <4> [515.287267] -----------[ cut here ]----------- <3> [515.287268] UBSAN: shift-out-of-bounds in ../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36 <3> [515.287271] shift exponent -1 is negative <4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary) <4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER <4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 1645 03/15/2024 <4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work [drm_display_helper] <4> [515.287303] Call Trace: <4> [515.287304] <TASK> <4> [515.287306] dump_stack_lvl+0xc1/0xf0 <4> [515.287313] dump_stack+0x10/0x20 <4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0 <4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0 <4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d [drm_display_helper] <4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe] <4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0 <4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60 <4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe] <4> [515.287740] ? find_held_lock+0x31/0x90 <4> [515.287747] ? lock_release+0xce/0x2a0 <4> [515.287754] drm_atomic_check_only+0x6a2/0xb40 <4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140 <4> [515.287765] drm_atomic_commit+0x6e/0xf0 <4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10 <4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0 <4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0 <4> [515.287795] ? mutex_lock_nested+0x1b/0x30 <4> [515.287801] drm_client_modeset_commit+0x26/0x50 <4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110 <4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140 <4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0 <4> [515.287819] drm_client_hotplug+0x6c/0xf0 <4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0 <4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30 <4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410 [drm_display_helper] <4> [515.287861] process_one_work+0x22b/0x6f0 <4> [515.287874] worker_thread+0x1e8/0x3d0 <4> [515.287879] ? __pfx_worker_thread+0x10/0x10 <4> [515.287882] kthread+0x11c/0x250 <4> [515.287886] ? __pfx_kthread+0x10/0x10 <4> [515.287890] ret_from_fork+0x2d7/0x310 <4> [515.287894] ? __pfx_kthread+0x10/0x10 <4> [515.287897] ret_from_fork_asm+0x1a/0x30 | 14 Oct |
| CVE-2026-116563 | 5.4 medium | 0.00% | smub, photo gallery, sliders, proofing and themes – nextgen gallery | The Photo Gallery, Sliders, Proofing and Themes – NextGEN Gallery plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 4.5.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the site to have Shutter or Shutter Reloaded selected as the active lightbox, and the injected comment must be approved through WordPress's standard moderation workflow before the payload is rendered to other visitors. | Sat 31 Oct |
| CVE-2023-0025 | 5.4 medium | 0.00% | sap, solution_manager | SAP Solution Manager (BSP Application) - version 720, allows an authenticated attacker to craft a malicious link, which when clicked by an unsuspecting user, can be used to read or modify some sensitive information or craft a payload which may restrict access to the desired resources. | Wed 28 Oct |
| CVE-2026-34749 | 5.4 medium | 0.00% | payloadcms, payload | Payload is a free and open source headless content management system. Prior to version 3.79.1, a Cross-Site Request Forgery (CSRF) vulnerability exists in the authentication flow. Under certain conditions, the configured CSRF protection could be bypassed, allowing cross-site requests to be made. This issue has been patched in version 3.79.1. | Mon 26 Oct |
| CVE-2026-4364 | 5.4 medium | 0.00% | ibm, security_verify_access, security_verify_access_container, verify_identity_access | IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 allows certificate listings retrieved via a browser session to return a JSON payload while incorrectly specifying the response Content-Type as text/html. Because the content is delivered with an HTML MIME type, browsers may interpret the JSON data as executable script under certain conditions. This creates an opportunity for JavaScript injection, potentially leading to cross-site scripting (XSS). | Mon 26 Oct |
| CVE-2026-35565 | 5.4 medium | 0.00% | apache, storm | Stored Cross-Site Scripting (XSS) via Unsanitized Topology Metadata in Apache Storm UI Versions Affected: before 2.8.6 Description: The Storm UI visualization component interpolates topology metadata including component IDs, stream names, and grouping values directly into HTML via innerHTML in parseNode() and parseEdge() without sanitization at any layer. An authenticated user with topology submission rights could craft a topology containing malicious HTML/JavaScript in component identifiers (e.g., a bolt ID containing an onerror event handler). This payload flows through Nimbus → Thrift → the Visualization API → vis.js tooltip rendering, resulting in stored cross-site scripting. In multi-tenant deployments where topology submission is available to less-trusted users but the UI is accessed by operators or administrators, this enables privilege escalation through script execution in an admin's browser session. Mitigation: 2.x users should upgrade to 2.8.6. Users who cannot upgrade immediately should monkey-patch the parseNode() and parseEdge() functions in the visualization JavaScript file to HTML-escape all API-supplied values including nodeId, :capacity, :latency, :component, :stream, and :grouping before interpolation into tooltip HTML strings, and should additionally restrict topology submission to trusted users via Nimbus ACLs as a defense-in-depth measure. A guide on how to do this is available in the release notes of 2.8.6. Credit: This issue was discovered while investigating another report by K. | Mon 26 Oct |
| CVE-2026-3428 | 5.4 medium | 0.00% | no CPE yet | A Download of Code Without Integrity Check vulnerability in the update modules in ASUS Member Center(华硕大厅) allows a local user to achieve privilege escalation to Administrator via exploitation of a Time-of-check Time-of-use (TOC-TOU) during the update process, where an unexpected payload is substituted for a legitimate one immediately after download, and subsequently executed with administrative privileges upon user consent. Refer to the 'Security Update for ASUS Member Center' section on the ASUS Security Advisory for more information. | Mon 26 Oct |
| CVE-2026-31953 | 5.4 medium | 0.00% | xibosignage, xibo | Xibo is an open source digital signage platform with a web content management system and Windows display player software. A stored Cross-Site Scripting (XSS) vulnerability in versions prior to 4.4.1 allows an authenticated user with notification creation permissions to inject arbitrary JavaScript into the notification body. When the notification is set as an "interrupt," the payload executes automatically in the browser of any targeted user upon login, requiring zero user interaction. Exploitation of the vulnerability is possible on behalf of an authorized user who has both of the following privileges, which are not granted to non-admins as standard: Access to the Notification Centre to view past notifications, and include "Add Notification" button to allow for the creation of new notifications. Users should upgrade to version 4.4.1 which fixes this issue. Upgrading to a fixed version is necessary to remediate. Users unable to upgrade should revoke such privileges from users they do not trust. | Mon 26 Oct |
| CVE-2026-44310 | 5.4 medium | 0.00% | no CPE yet | Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. | Mon 26 Oct |
| CVE-2026-54025 | 5.4 medium | 0.00% | librechat | LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.4-rc1, there is a vulnerability in LibreChat's markdown artifact preview pipeline. The marked library v15.0.12 does not HTML-escape double-quote characters in image alt text when a custom renderer falls through to the default renderer. LibreChat's generateMarkdownHtml function (in client/src/utils/markdown.ts) installs a custom image renderer that returns false for URLs passing the isSafeUrl allowlist check, which causes marked to fall back to its built-in renderer. That built-in renderer inserts the raw alt text into the alt="..." attribute without escaping double-quote characters. An attacker can craft an alt text such as " onload="payload to break out of the attribute and inject an arbitrary event handler. The resulting HTML is then assigned to document.getElementById('content').innerHTML inside the Sandpack preview iframe, causing the payload to execute in the victim's browser. This vulnerability is fixed in 0.8.4-rc1. | Sun 25 Oct |
| CVE-2026-50742 | 5.4 medium | 0.00% | revive-adserver, revive_adserver | A stored XSS vulnerabilities exists in the `maintenance-acl-check.php` and `maintenance-banners-check.php` tools of Revive Adserver 6.0.7. The issue was caused by entity names being displayed without proper escaping when inconsistencies were detected. Whether the XSS payload is executed when an administrator uses the affected maintenance tools is not entirely under the attacker's control. | Sun 25 Oct |
| CVE-2026-72553 | 5.4 medium | 0.00% | no CPE yet | A stored cross-site scripting vulnerability in ElkArte Forum 2.0 Beta 1 allows any registered member to inject persistent JavaScript into the profile fields cust_blurb and cust_locate. The fields are saved without HTML encoding and rendered unescaped in profile views visible to administrators. An attacker can craft a payload that executes in an administrator session, enabling session hijacking or privilege escalation. | 24 Oct |
| CVE-2026-59188 | 5.4 medium | 0.00% | no CPE yet | Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.3, Part-DB-server sanitizes SVG files based solely on the user-controlled filename extension rather than actual file content type. An authenticated attacker can upload a malicious SVG with JavaScript payload using a non-SVG extension (e.g., .jpg), bypassing sanitization entirely. When any user views the attachment inline, the browser receives Content-Type: image/svg+xml and executes the embedded script in the Part-DB origin. This issue has been patched in version 2.12.3. | 23 Oct |
| CVE-2026-48483 | 5.4 medium | 0.00% | no CPE yet | TypeBot is a chatbot builder tool. Prior to version 3.17.0, Typebot's WhatsApp status forwarding feature stores a workspace-configured webhook forwarding URL and later POSTs WhatsApp marketing/error status events to it from the server. The stored URL is only validated as a generic URL in settings, but the forwarding code uses the raw `ky` instance instead of the repository's SSRF-protected `safeKy` client. A workspace user who can configure WhatsApp settings can therefore make the Typebot server issue HTTP requests to internal services, private-network hosts, localhost, or metadata-style endpoints whenever the public WhatsApp production webhook receives a status payload that should be forwarded. Version 3.17.0 patches the issue. | 23 Oct |
| CVE-2026-112951 | 5.4 medium | 0.00% | no CPE yet | ApostropheCMS is an open-source Node.js content management system. Prior to 4.34.0, the color field accepts trailing content after a valid rgb() or hsl() prefix because its TinyColor validation does not require the entire value to match a color. An authenticated user with edit rights can store arbitrary HTML after a valid color prefix. When the stored value is rendered, the payload executes, resulting in stored XSS. This issue is fixed in version 4.34.0. | 20 Oct |
| CVE-2025-58177 | 5.4 medium | 0.00% | n8n | n8n is an open source workflow automation platform. From 1.24.0 to before 1.107.0, there is a stored cross-site scripting (XSS) vulnerability in @n8n/n8n-nodes-langchain.chatTrigger. An authorized user can configure the LangChain Chat Trigger node with malicious JavaScript in the initialMessages field and enable public access so that the payload is executed in the browser of any user who visits the resulting public chat URL. This can be used for phishing or to steal cookies or other sensitive data from users accessing the public chat link. The issue is fixed in version 1.107.0. Updating to 1.107.0 or later is recommended. As a workaround, the affected chatTrigger node can be disabled. No other workarounds are known. | 19 Oct |
| CVE-2025-61597 | 5.4 medium | 0.00% | emlog | Emlog is an open source website building system. In versions 2.5.21 and below, an HTML template injection allows stored cross‑site scripting (XSS) via the mail template settings. Once a malicious payload is saved, any subsequent visit to the settings page in an authenticated admin context will execute attacker‑controlled JavaScript, enabling session/token theft and full admin account takeover. This issue is fixed in version 2.5.22. | 19 Oct |
| CVE-2025-59948 | 5.4 medium | 0.00% | freshrss | FreshRSS is a free, self-hostable RSS aggregator. Versions 1.26.3 and below do not sanitize certain event handler attributes in feed content, so by finding a page that renders feed entries without CSP, it is possible to execute an XSS payload. The Allow API access authentication setting needs to be enabled by the instance administrator beforehand for the attack to work as it relies on api/query.php. An account takeover is possible by sending a change password request via the XSS payload / setting UserJS for persistence / stealing the autofill password / displaying a phishing page with a spoofed URL using history.replaceState() If the victim is an administrator, the attacker can also perform administrative actions. This issue is fixed in version 1.27.0. | 19 Oct |
| CVE-2025-59428 | 5.4 medium | 0.00% | espocrm | EspoCRM is an open source customer relationship management application. In versions before 9.1.9, a vulnerability allows arbitrary user creation, including administrative accounts, through a combination of stored SVG injection and lack of CSRF protection. An attacker with Knowledge Base edit permissions can embed a malicious SVG element containing a link in the body field of an article. When an authenticated user clicks the malicious link, they are redirected to an attacker-controlled HTML page that executes a CSRF request against the api/v1/User endpoint. If the victim is prompted for and enters their credentials, an attacker-controlled account is created with privileges determined by the CSRF payload. This issue has been patched in version 9.1.9. | 19 Oct |
| CVE-2025-20367 | 5.4 medium | 0.00% | splunk, splunk_cloud_platform | In Splunk Enterprise versions below 9.4.4, 9.3.6 and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.109, 9.3.2408.119 and 9.2.2406.122, a low-privileged user that does not hold the 'admin' or 'power' Splunk roles could craft a malicious payload through the `dataset.command` parameter of the `/app/search/table` endpoint, which could result in execution of unauthorized JavaScript code in the browser of a user. | 18 Oct |
| CVE-2025-20368 | 5.4 medium | 0.00% | splunk, splunk_cloud_platform | In Splunk Enterprise versions below 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.108, 9.3.2408.118 and 9.2.2406.123, a low privileged user that does not hold the admin or power Splunk roles could craft a malicious payload through the error messages and job inspection details of a saved search. This could result in execution of unauthorized JavaScript code in the browser of a user. | 18 Oct |
| CVE-2026-73254 | 5.4 medium | 0.00% | cesanta, mongoose | Mongoose is an embedded web server and network library. Prior to 7.22, an attacker who can create a file with an HTML payload in its name can trigger stored cross-site scripting when a user browses a directory served with MG_ENABLE_DIRLIST. The printdirentry() path called by listdir() in src/http.c URL-encodes the href but inserts the raw filesystem filename into the HTML link text. The browser executes the injected markup in the Mongoose origin, which can expose session data or permit actions as the victim. This issue is fixed in version 7.22. | 18 Oct |
| CVE-2026-104001 | 5.4 medium | 0.00% | no CPE yet | The The Slim SEO – AI SEO Plugin, Lightweight, Fast & Automated plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 4.11.1 This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. A Subscriber-level user need only save the shortcode payload to their own Biographical Info field via the REST API or wp-admin profile page; the shortcode then executes on any unauthenticated front-end request that resolves that author's description, such as requests using the ?author= query parameter when auto_redirection is disabled. | 16 Oct |
| CVE-2026-47760 | 5.4 medium | 0.00% | tiny, tinymce | TinyMCE is an open source rich text editor. From 6.8.0 to before 7.1.0, TinyMCE contains an XSS vulnerability caused by improper SVG namespace scope handling in the sanitizer. A crafted payload using nested elements can bypass attribute sanitization and execute arbitrary JavaScript. This vulnerability is fixed in 7.1.0. | 14 Oct |
| CVE-2025-66843 | 5.4 medium | 0.00% | getgrav, grav | grav before v1.7.49.5 has a Stored Cross-Site Scripting (Stored XSS) vulnerability in the page editing functionality. An authenticated low-privileged user with permission to edit content can inject malicious JavaScript payloads into editable fields. The payload is stored on the server and later executed when any other user views or edits the affected page. | 14 Oct |
| CVE-2026-103424 | 5.4 medium | 0.00% | no CPE yet | The Anti-Spam by CleanTalk – Spam Protection Without CAPTCHA plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 6.88 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is exploitable once a comment from the attacker's email address has been approved; on default WordPress installations, only the first comment from a given email address is held for moderation, meaning subsequent comments auto-approve and immediately expose the payload to site visitors. | 13 Oct |
| CVE-2026-103482 | 5.4 medium | 0.00% | no CPE yet | The Simple Newsletter Plugin – Noptin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'noptin_fields[<custom_field_merge_tag>] (e.g. first_name)' parameter in all versions up to, and including, 4.3.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The attack chain requires a published campaign post whose body contains a [[subscriber.*]] merge tag; the unauthenticated attacker first POSTs the entity-encoded payload to the public manage_preferences form (which issues its own nonce on the same page), then pivots execution by embedding their confirm_key in a campaign preview URL sent to a privileged user via social engineering. | 13 Oct |
| CVE-2025-61914 | 5.4 medium | 0.00% | n8n | n8n is an open source workflow automation platform. Prior to version 1.114.0, a stored Cross-Site Scripting (XSS) vulnerability may occur in n8n when using the “Respond to Webhook” node. When this node responds with HTML content containing executable scripts, the payload may execute directly in the top-level window, rather than within the expected sandbox introduced in version 1.103.0. This behavior can enable a malicious actor with workflow creation permissions to execute arbitrary JavaScript in the context of the n8n editor interface. This issue has been patched in version 1.114.0. Workarounds for this issue involve restricting workflow creation and modification privileges to trusted users only, avoiding use of untrusted HTML responses in the “Respond to Webhook” node, and using an external reverse proxy or HTML sanitizer to filter responses that include executable scripts. | 13 Oct |
| CVE-2026-95166 | 5.4 medium | 0.00% | no CPE yet | In Bacularis v1.0.0 - 6.5.1 when adding a new pool, the LabelFormat field allows for a Cross Site Scripting (XSS) payload. | 12 Oct |
Download these 1000 as CSV (the first thousand in this order) · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.