Vulnerabilities
All
My stack
Known exploited
Public exploit
Critical (9+)
Likely exploited (EPSS ≥ 50%)
Changed, 24 h
New, 24 h
Sort:
risk
modified
published
CVSS
EPSS
| CVE | CVSS | EPSS | Vendor, product | Description | Modified |
|---|---|---|---|---|---|
| CVE-2026-73581 | unscored | 0.00% | apache software foundation, apache tomcat | Improper Check for Certificate Revocation vulnerability in Apache Tomcat. Both the OpenSSL and OpenSSL-FFM TLS implementations ignore CRLs when certificate uses a keystore. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0-M1 through 9.0.121. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.26, 10.1.59, 9.0.122, which fixes the issue. | Thu 29 Oct |
| CVE-2026-83525 | unscored | 0.00% | no CPE yet | Incorrect operator (CWE-480) in the FetchSnapshot RPC handler in Apache Kafka from 2.8.0 before 4.2.2, and from 4.3.0 before 4.3.2 on all platforms allows an authenticated attacker with CLUSTER_ACTION privilege to cause a denial of service (controller process termination) via a crafted FetchSnapshotRequest with an empty topics array or a topic with no partitions. Users are recommended to upgrade to version 4.2.2, 4.3.2, or 4.4.0, which fix this issue. Users on unsupported branches (4.1.x and earlier) should upgrade to 4.2.2 or later. | Wed 28 Oct |
| CVE-2026-115644 | unscored | 0.00% | no CPE yet | Apache Kafka Connect contains an authentication bypass vulnerability affecting the admin REST API when admin.listeners is configured with a separate listener from the main listeners property. When operators isolate the admin REST API by explicitly configuring the "admin.listeners" property, REST extensions specified via rest.extension.classes (such as BasicAuthSecurityRestExtension) are not registered or applied to the admin resource configuration. While the primary REST API listener (configured via listeners) enforces configured authentication and authorization filters, endpoints mounted under the separate admin listener (/admin/loggers) fail to inherit or instantiate these extension filters. As a result, the admin logger endpoint accepts unauthenticated read and write requests even when security extensions are active on the main listener. Impact: An unauthenticated attacker with network access to the admin listener can: 1. Read the complete set of logger names and levels, disclosing loaded class names and which security extensions are in use. 2. Write logger levels, including with scope=cluster which propagates the change to all workers in the Connect cluster. This can be used to suppress logging (setting root to OFF) or generate excessive log output (setting root to TRACE), potentially impacting availability and observability. Mitigation: Users who cannot upgrade immediately can remove the admin.listeners configuration (or leave it unset). When unset, admin resources share the regular listener and inherit its security extensions. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0, we make sure the REST extensions specified via "rest.extension.classes" will also apply to "admin.listeners". | Wed 28 Oct |
| CVE-2026-111551 | unscored | 0.00% | no CPE yet | Several Kafka deserialization paths read a size or count field from input data and use it directly to allocate an array, collection, or byte buffer, with no check against the bytes actually available. A small crafted input can therefore declare a very large size and force a multi-gigabyte allocation. The affected paths are, in Kafka Streams, ProcessorRecordContext (header count), ChangedDeserializer (varint value length), CombinedKeySchema (foreign-key length, which could also produce a negative size), ProcessorMetadata (key length), and AssignmentInfo group-assignment decoding; and, in the clients library, ListDeserializer (used by ListSerde). Impact: An attacker can trigger the oversized allocation and raise an OutOfMemoryError that crashes the affected consumer or Kafka Streams thread; the broker and the rest of the cluster are unaffected. The reachable surface depends on the path: writing a crafted record to a Streams application's internal changelog or repartition topics, or committing crafted offset metadata to its consumer group (Streams internal paths); writing a crafted record to any topic that a consumer reads with ListSerde (ListDeserializer); or, as a member of a Streams consumer group, returning crafted assignment data when elected leader (AssignmentInfo). Because a crafted record remains in its topic, the error can recur on restart. The record size limit (max.message.bytes) does not help, because the allocation is driven by a size field rather than by the input's length. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Where authorization is enabled, restrict write access to each application's internal topics and consumer group to its own principal, and restrict who can produce to topics that are consumed with ListSerde. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: these deserialization paths validate the declared size against the remaining input before allocating and reject input that fails the check. | Wed 28 Oct |
| CVE-2026-111496 | unscored | 0.00% | no CPE yet | Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread. Impact: A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed. Mitigation: Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. | Wed 28 Oct |
| CVE-2026-111115 | unscored | 0.00% | no CPE yet | Apache Kafka's code-generated readers for flexible protocol versions read a tagged-field count declared by the sender and retain a RawTaggedField object for each unknown field. That count was bounded only by the outer request frame size (socket.request.max.bytes); it was not checked against the remaining buffer bytes or capped. Because each entry can be encoded in as little as two bytes (unknown tag 0, size 0), a modest request can declare tens of millions of tagged fields and force one object allocation per declared field. Flexible request headers (header version 2, used by flexible APIs such as ApiVersions v3) are parsed this way, so the amplification applies to the request header itself. Impact: The flexible request header is parsed on the network thread before authorization, request dispatch, and request-time quota accounting. A client can send a request of a few tens of megabytes whose header declares about 20 million tagged fields, forcing roughly that many RawTaggedField allocations and exhausting broker heap or inducing process-wide GC stalls, denying broker service. Because the header is parsed for pre-authentication APIs such as ApiVersions (v3), the allocation can occur before authentication; no Kafka resource ACL or quota is required. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers bounds-check the tagged-field count for flexible-versioned messages, rejecting a negative count, a count exceeding the remaining buffer bytes, or a count exceeding a fixed maximum (10,000), before any per-field allocation. | Wed 28 Oct |
| CVE-2026-111108 | unscored | 0.00% | no CPE yet | Apache Kafka's code-generated protocol readers pre-size an array's collection from the element count declared by the sender. That count is checked only against the bytes remaining in the request buffer, which assumes about one byte per element; because most elements need several bytes, a request can declare far more elements than the buffer holds and still pass. For a keyed array the reader then allocates an ImplicitLinkedHashCollection of capacity (2 * count +1), so a request of a few tens of megabytes can force a heap allocation several times larger before any element is read. The pattern is emitted into every generated reader, so it affects all Kafka API types with an array field. Impact: Request parsing happens before any authorization check. On a listener that does not require authentication (for example PLAINTEXT), an unauthenticated attacker can send a few concurrent requests that each declare a very large= array length and allocate many times their wire size in broker heap, crashing the broker with an OutOfMemoryError. The reporter demonstrated three concurrent ~90 MB ProduceRequest (v3) connections exhausting a 1 GB heap (~8x amplification). On listeners that require authentication, the attacker needs valid credentials but no specific ACL, since parsing precedes authorization.. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Until then, lowering socket.request.max.bytes and restricting network access to broker listeners reduces, but does not remove, exposure. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: generated readers cap the initial array pre-allocation at MessageUtil.MAX_PREALLOCATED_ARRAY_CAPACITY (1000) and grow it on demand, and reject a declared array length above MessageUtil.MAX_ARRAY_LENGTH (1,000,000). | Wed 28 Oct |
| CVE-2026-111073 | unscored | 0.00% | no CPE yet | The broker-side PushTelemetry API (KIP-714) validates only the compressed size of a client's metrics payload against telemetry.max.bytes (default 1 MB) before decompressing it. ClientTelemetryUtils.decompress() then decompresses the payload with no limit on the decompressed output size, growing a heap buffer until the compressed input is exhausted. A small, highly compressible payload (for example gzip-compressed zeros) can therefore expand to hundreds of megabytes of broker heap. Impact: An authenticated client can send a PushTelemetry request with a small compressed payload that decompresses to a very large size, consuming broker heap out of proportion to the request size. Repeated or concurrent requests can exhaust the broker heap and cause an OutOfMemoryError, degrading or crashing the broker; a client that targets multiple brokers can affect cluster availability. PushTelemetry is available to any authenticated client and is not gated by an ACL. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.1, or 4.4.0. On affected versions there is no configuration that fully prevents the amplification, because telemetry.max.bytes bounds only the compressed size; lowering telemetry.max.bytes reduces the worst-case decompressed size proportionally and is a partial mitigation. Resolution: - From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: ClientTelemetryUtils.decompress() enforces a maximum decompressed size equal to telemetry.max.bytes (default 1 MB). Decompression reads in bounded chunks and aborts with a TelemetryTooLargeException once the decompressed total exceeds the limit, so an over-large or highly compressible payload is rejected instead of being fully expanded in heap. The decompressed size is therefore bounded by default. | Wed 28 Oct |
| CVE-2026-112375 | unscored | 0.00% | no CPE yet | An authenticated Kafka principal with no authorization grants (not even ALTER_CONFIGS) can make a broker read a file or an environment variable from the broker host and return its contents. An IncrementalAlterConfigs (or AlterConfigs) request targeting a BROKER resource reaches the broker's configuration validation before any authorization check is applied to that path. Validation resolves configuration variables such as ${file:/path:key} or ${env:VAR} using a ConfigProvider named in the request, and this resolution bypasses the org.apache.kafka.automatic.config.providers allowlist that was added as the mitigation for CVE-2024-31141. An arbitrary ConfigProvider (for example FileConfigProvider or EnvVarConfigProvider) is therefore instantiated and the referenced file or environment variable is read, and a type-validation error returns the resolved content to the caller. Impact: On a cluster with an authorizer enabled, an authenticated principal with no authorization grants can read the contents of files accessible to the broker process, and the broker's environment variables, exposing credentials, keystores, or other secrets, defeating the CVE-2024-31141 allowlist. The read is bounded by the broker process's file permissions. The brokers and the cluster remain available; the issue is disclosure of file and environment- variable contents. Clusters with no authorizer configured are not affected in practice, because every principal already holds ALTER_CONFIGS there. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. As defense in depth, run brokers under a least-privileged operating-system account so that sensitive files are not readable by the broker process. Resolution: From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: broker configuration changes are authorized (ALTER_CONFIGS on the cluster) before the configuration is validated, and configuration- variable resolution enforces the config-providers allowlist. | Wed 28 Oct |
| CVE-2026-110985 | unscored | 0.00% | no CPE yet | A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set. Impact: A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all. Mitigation (all affected versions, no upgrade required): Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class. Resolution: From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). | Wed 28 Oct |
| CVE-2026-110952 | unscored | 0.00% | no CPE yet | A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured: - The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it. - An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is still rejected when no expected audience is configured.) Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0). Impact: The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the signature is validated and only the issuer/audience checks are not enforced by default. Mitigation (all affected versions, no upgrade required): Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0. Resolution: - From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. | Wed 28 Oct |
| CVE-2026-79633 | unscored | 0.00% | no CPE yet | vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Missing authorization checks allowed authenticated users to perform actions on non-public content they were not permitted to access. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-79624 | unscored | 0.00% | no CPE yet | Insufficient session expiration vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Insufficient session invalidation allowed revoked users to continue accessing known private uploaded files with a stale visit token. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-79620 | unscored | 0.00% | no CPE yet | Exposure of sensitive information through data queries vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. An improper authorization check in the similar-question search allowed authenticated users to view metadata of non-public questions. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-79613 | unscored | 0.00% | no CPE yet | vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Unauthenticated attackers could access comments associated with non-public content through public user profiles. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-76994 | unscored | 0.00% | no CPE yet | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. Unauthenticated attackers could obtain metadata associated with hidden questions through public answer profiles. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-64945 | unscored | 0.00% | no CPE yet | A vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. The question operation controller gates hide/show operations on the wrong permission check result (the unpin permission instead of the hide permission), so in custom role configurations that separate these permissions, a user granted only question.unpin can hide or restore questions without holding question.hide or question.show. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-64944 | unscored | 0.00% | no CPE yet | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. The importer stores imported question bodies as raw HTML without passing them through the normal Markdown-to-HTML sanitization path, so attacker-controlled HTML embedded in an imported data source is persisted and rendered to all viewers (including privileged users) as stored XSS. Users are recommended to upgrade to version 2.0.3, which fixes the issue. | 19 Oct |
| CVE-2026-108837 | unscored | 0.00% | no CPE yet | Allocation of resources without limits or throttling vulnerability in Apache Kylin. Given an attacker has got project admin permission, an cache API maybe used to cause computed-column resource exhaustion. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | 19 Oct |
| CVE-2026-108833 | unscored | 0.00% | no CPE yet | Default startup profile miss security settings in Apache Kylin. Any deployment has security setting profile turned on does not impact. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | 19 Oct |
| CVE-2026-108823 | unscored | 0.00% | no CPE yet | Exposure of Sensitive Information to an Unauthorized Actor during job manipulation in Apache Kylin. The impact is minor unless job services are exposed to public network, which is uncommon. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | 19 Oct |
921 of 921 · Previous
Download these 921 as CSV · subscribe to this list.
EPSS scores: 2026-10-31. NVD cursor: 2026-10-29 00:22. The News page shows only notable CVEs (KEV, your stack, new criticals, EPSS over 50%, or active exploitation per SSVC); this table has all of them.